From c8e5702127e507e82e6f68a4b8c546803accea9d Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Thu, 30 Jun 2005 08:19:37 +0000 Subject: import clean BK tree at cset 1.3670 --- packages/uboot/u-boot-1.1.2/mnci.patch | 1007 ++++++++++++++++++++++++++++++++ 1 file changed, 1007 insertions(+) (limited to 'packages/uboot/u-boot-1.1.2/mnci.patch') diff --git a/packages/uboot/u-boot-1.1.2/mnci.patch b/packages/uboot/u-boot-1.1.2/mnci.patch index e69de29bb2..d69cf8eb72 100644 --- a/packages/uboot/u-boot-1.1.2/mnci.patch +++ b/packages/uboot/u-boot-1.1.2/mnci.patch @@ -0,0 +1,1007 @@ + +# +# Patch managed by http://www.holgerschurig.de/patcher.html +# + +--- u-boot-1.1.2/CREDITS~mnci ++++ u-boot-1.1.2/CREDITS +@@ -360,6 +360,9 @@ + E: r.schwebel@pengutronix.de + D: Support for csb226, logodl and innokom boards (PXA2xx) + ++N: Holger Schurig ++D: Support for MNCI-RX "Ramses" ++ + N: Yasushi Shoji + E: yashi@atmark-techno.com + D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board +--- u-boot-1.1.2/MAINTAINERS~mnci ++++ u-boot-1.1.2/MAINTAINERS +@@ -396,6 +396,10 @@ + csb226 xscale + innokom xscale + ++Holger Schurig ++ ++ mnci xscale ++ + Andrea Scian + + B2 ARM7TDMI (S3C44B0X) +--- u-boot-1.1.2/Makefile~mnci ++++ u-boot-1.1.2/Makefile +@@ -1388,6 +1388,9 @@ + wepep250_config : unconfig + @./mkconfig $(@:_config=) arm pxa wepep250 + ++mnci_config : unconfig ++ @./mkconfig $(@:_config=) arm pxa mnci ++ + xaeniax_config : unconfig + @./mkconfig $(@:_config=) arm pxa xaeniax + +--- /dev/null ++++ u-boot-1.1.2/board/mnci/Makefile +@@ -0,0 +1,49 @@ ++# ++# (C) Copyright 2000 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# (C) Copyright 2005 ++# M&N Solutions GmbH, Rosbach, Germany, Holger Schurig ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := mnci.o ++SOBJS := memsetup.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +--- /dev/null ++++ u-boot-1.1.2/board/mnci/config.mk +@@ -0,0 +1 @@ ++TEXT_BASE = 0xa1fe0000 +--- /dev/null ++++ u-boot-1.1.2/board/mnci/u-boot.lds +@@ -0,0 +1,55 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/pxa/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +--- /dev/null ++++ u-boot-1.1.2/board/mnci/mnci.c +@@ -0,0 +1,174 @@ ++/* ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++ ++/** ++ * board_init: - setup some data structures ++ * ++ * @return: 0 in case of success ++ */ ++ ++int board_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* memory and cpu-speed are setup before relocation */ ++ /* so we do _nothing_ here */ ++ ++ gd->bd->bi_arch_number = MACH_TYPE_RAMSES; ++ gd->bd->bi_boot_params = 0xa0000100; ++#if 0 ++ gd->bd->bi_baudrate = 115200; ++#endif ++ ++#if 0 ++ CKEN |= CKEN2_AC97; ++ GCR = GCR_COLD_RST; ++#endif ++ ++ return 0; ++} ++ ++ ++int board_late_init(void) ++{ ++ setenv("stdout", "serial"); ++ setenv("stderr", "serial"); ++ return 0; ++} ++ ++ ++/** ++ * dram_init: - setup dynamic RAM ++ * ++ * @return: 0 in case of success ++ */ ++ ++int dram_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++ ++ ++#ifdef CFG_JFFS_CUSTOM_PART ++ ++#include ++ ++#define FLASH_DEBUG 1 ++ ++/* Some debug macros */ ++#if (FLASH_DEBUG > 2 ) ++#define PRINTK3(args...) printf(args) ++#else ++#define PRINTK3(args...) ++#endif ++ ++#if FLASH_DEBUG > 1 ++#define PRINTK2(args...) printf(args) ++#else ++#define PRINTK2(args...) ++#endif ++ ++#ifdef FLASH_DEBUG ++#define PRINTK(args...) printf(args) ++#else ++#define PRINTK(args...) ++#endif ++ ++ ++#define FLASH_BANK_SIZE 0x02000000 /* 32 MB (during development) */ ++#define MAIN_SECT_SIZE 0x00040000 /* 256k per sector */ ++ ++#ifndef CFG_FLASH_CFI ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++#endif ++ ++static struct part_info part; ++static int current_part = -1; ++ ++struct part_info* jffs2_part_info(int part_num) { ++ void *jffs2_priv_saved = part.jffs2_priv; ++ ++ PRINTK2("jffs2_part_info: part_num=%i\n",part_num); ++ ++ if (current_part == part_num) ++ return ∂ ++ ++ /* u-boot partition */ ++ if(part_num==0){ ++ memset(&part, 0, sizeof(part)); ++ ++ part.offset=(char*)0x00000000; ++ part.size=0x00040000; ++ ++ /* Mark the struct as ready */ ++ current_part = part_num; ++ ++ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset); ++ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size); ++ } ++ ++ /* primary Kernel partition */ ++ if(part_num==1){ ++ memset(&part, 0, sizeof(part)); ++ ++ part.offset=(char*)0x00040000; ++ part.size=0x00040000*4; ++ ++ /* Mark the struct as ready */ ++ current_part = part_num; ++ ++ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset); ++ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size); ++ } ++ ++ /* data partition */ ++ if(part_num==3){ ++ memset(&part, 0, sizeof(part)); ++ ++ part.offset=(char*)0x00140000; ++ part.size=FLASH_BANK_SIZE-0x00140000; ++ ++ /* Mark the struct as ready */ ++ current_part = part_num; ++ ++ PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset); ++ PRINTK("part.size = 0x%08x\n",(unsigned int)part.size); ++ } ++ ++ if (current_part == part_num) { ++ part.usr_priv = ¤t_part; ++ part.jffs2_priv = jffs2_priv_saved; ++ return ∂ ++ } ++ ++ PRINTK("jffs2_part_info: end of partition table\n"); ++ return 0; ++} ++#endif +--- /dev/null ++++ u-boot-1.1.2/include/configs/mnci.h +@@ -0,0 +1,309 @@ ++/* ++ * (C) Copyright 2005 ++ * Holger Schurig, M&N Solutions GmbH, Rosbach, Germany ++ * ++ * Configuration for the Auerswald Innokom CPU board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#include ++ ++/* ++ * If we are developing, we might want to start armboot from ram ++ * so we MUST NOT initialize critical regs like mem-timing ... ++ */ ++#define CONFIG_INIT_CRITICAL /* undef for developing */ ++ ++/* ++ * define the following to enable debug blinks. A debug blink function ++ * must be defined in memsetup.S ++ */ ++#undef DEBUG_BLINK_ENABLE ++#undef DEBUG_BLINKC_ENABLE ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ ++ ++#undef CONFIG_LCD ++#ifdef CONFIG_LCD ++#define CONFIG_SHARP_LM8V31 ++#endif ++ ++#define CONFIG_MMC 1 ++#define BOARD_LATE_INIT 1 ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * MNCI memory map information ++ */ ++ ++#define MNCI_CS5_ETH_OFFSET 0x03400000 ++ ++ ++/* ++ * Hardware drivers ++ */ ++#if 0 ++#define CONFIG_DRIVER_SMC91111 ++#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + MNCI_CS5_ETH_OFFSET + 0x300) ++#define CONFIG_SMC_USE_32_BIT 1 ++//#define CONFIG_SMC_USE_IOFUNCS ++#endif ++ ++/* the following has to be set high -- suspect something is wrong with ++ * with the tftp timeout routines. FIXME!!! ++ */ ++#define CONFIG_NET_RETRY_COUNT 100 ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_FFUART 1 /* we use FFUART on MNCI */ ++ ++/* allow to overwrite serial and ethaddr */ ++//#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++#define CONFIG_COMMANDS ( 0 \ ++ | CFG_CMD_ENV \ ++ | CFG_CMD_FLASH \ ++ | CFG_CMD_LINUX \ ++ | CFG_CMD_JFFS2 \ ++ | CFG_CMD_LOADB \ ++ | CFG_CMD_MEMORY \ ++ | CFG_CMD_MISC \ ++ | CFG_CMD_RUN \ ++ ) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include ++ ++#define CONFIG_BOOTDELAY 0 ++#define CONFIG_BOOTCOMMAND "linux" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 rootfstype=jffs2 root=/dev/mtdblock2" ++//#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/nfsroot ip=192.168.233.14:192.168.233.1:192.168.233.1:255.255.255.0:ramses2:eth0:off" ++#define CONFIG_CMDLINE_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CFG_CONSOLE_INFO_QUIET 1 ++#define CFG_JFFS_SINGLE_PART 1 ++ ++/* ++ * Current memory map for MNCI supplied Linux images: ++ * ++ * Flash: ++ * 0x00000 - 0x003ffff: bootloader ++ * 0x040000 - 0x013ffff: kernel ++ * 0x140000 - 0x1ffffff: file system ++ * ++ * RAM: ++ * 0xa0008000 - kernel is loaded ++ * 0xa1fe0000 - Uboot runs (48MB into RAM) ++ * ++ */ ++ ++#define MY_CONFIG_EXTRA_ENV_SETTINGS \ ++ "prog_boot_mmc=" \ ++ "mw.b 0xa0000000 0xff 0x40000; " \ ++ "if mmcinit && " \ ++ "fatload mmc 0 0xa0000000 u-boot.bin; " \ ++ "then " \ ++ "protect off 0x0 0x3ffff; " \ ++ "erase 0x0 0x3ffff; " \ ++ "cp.b 0xa0000000 0x0 0x40000; " \ ++ "reset;" \ ++ "fi\0" \ ++ "prog_uImage_mmc=" \ ++ "mw.b 0xa0000000 0xff 0x1C0000; " \ ++ "if mmcinit && " \ ++ "fatload mmc 0 0xa0000000 uImage; " \ ++ "then " \ ++ "protect off 0x40000 0x13ffff; " \ ++ "erase 0x40000 0x13ffff; " \ ++ "cp.b 0xa0000000 0x40000 0x1C0000; " \ ++ "fi\0" \ ++ "prog_jffs_mmc=" \ ++ "mw.b 0xa0000000 0xff 0x1e00000; " \ ++ "if mmcinit && " \ ++ "fatload mmc 0 0xa0000000 root.jffs; " \ ++ "then " \ ++ "protect off 0x200000 0x13fffff; " \ ++ "erase 0x200000 0x13fffff; " \ ++ "cp.b 0xa0000000 0x200000 0x1e00000; " \ ++ "fi\0" \ ++ "boot_mmc=" \ ++ "if mmcinit && " \ ++ "fatload mmc 0 0xa1000000 uImage && " \ ++ "then " \ ++ "bootm 0xa1000000; " \ ++ "fi\0" \ ++ "prog_boot_net=" \ ++ "mw.b 0xa0000000 0xff 0x100000; " \ ++ "if bootp 0xa0000000 u-boot.bin; " \ ++ "then " \ ++ "protect off 0x0 0x3ffff; " \ ++ "erase 0x0 0x3ffff; " \ ++ "cp.b 0xa0000000 0x0 0x40000; " \ ++ "reset; " \ ++ "fi\0" \ ++ "prog_uImage_net=" \ ++ "mw.b 0xa0000000 0xff 0x1C0000; " \ ++ "if bootp 0xa0000000 uImage; " \ ++ "then " \ ++ "protect off 0x40000 0x13ffff; " \ ++ "erase 0x40000 0x13ffff; " \ ++ "cp.b 0xa0000000 0x40000 0x1C0000; " \ ++ "fi\0" \ ++ "boot_uImage_net=" \ ++ "mw.b 0xa0000000 0xff 0x1C0000; " \ ++ "if bootp 0xa0000000 uImage; " \ ++ "then " \ ++ "bootm 0xa0000000; " \ ++ "fi\0" \ ++ "prog_jffs_net=" \ ++ "mw.b 0xa0000000 0xff 0x1e00000; " \ ++ "if bootp 0xa0000000 root.jffs; " \ ++ "then " \ ++ "protect off 0x200000 0x13fffff; " \ ++ "erase 0x200000 0x13fffff; " \ ++ "cp.b 0xa0000000 0x200000 0x1e00000; " \ ++ "fi\0" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "bootargsnfs=console=ttyS0,115200 root=/dev/nfsroot ip=192.168.233.14:192.168.233.1:192.168.233.1:255.255.255.0:ramses2:eth0:off;\0" \ ++ "boot_nfs=" \ ++ "set bootargs $bootargsnfs; " \ ++ "linux\0" ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++//#define CFG_HUSH_PARSER 1 ++//#define CFG_PROMPT_HUSH_PS2 "> " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "mnci> " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_DEVICE_NULLDEV 1 ++ ++#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x40000 /* default load address */ ++ ++#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ ++#define CFG_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ ++ ++//#define RTC 1 /* enable 32KHz osc */ ++ ++ /* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_MMC_BASE 0xF0000000 ++ ++/* ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (256*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++ ++/* ++ * Environment ++ */ ++#define CFG_MONITOR_BASE 0 ++#define CFG_MONITOR_LEN 0x40000 ++ ++#define CFG_ENV_IS_IN_FLASH 1 ++#define CFG_ENV_ADDR 0x20000 ++#define CFG_ENV_SIZE 0x4000 ++#define CFG_ENV_SECT_SIZE 0x40000 ++ ++/* ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ ++#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x08000000 /* 64 MB */ ++ ++#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ ++#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ ++#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ ++//#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ ++//#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ ++ ++#define CFG_DRAM_BASE PHYS_SDRAM_1 ++#define CFG_DRAM_SIZE PHYS_SDRAM_1_SIZE ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++ ++/* ++ * JFFS2 Partitions ++ */ ++#define CFG_JFFS_CUSTOM_PART 1 /* see board/innokom/flash.c */ ++ ++ ++/* ++ * FLASH organization ++ */ ++#define CFG_FLASH_CFI ++#define CFG_FLASH_CFI_DRIVER 1 ++ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ ++ ++#define CFG_FLASH_USE_BUFFER_WRITE 1 ++ ++/* timeout values are in ticks */ ++#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ ++ ++ ++#endif /* __CONFIG_H */ +--- /dev/null ++++ u-boot-1.1.2/board/mnci/memsetup.S +@@ -0,0 +1,359 @@ ++/* ++ * Memory & peripheral setup of the XScale PXA250 ++ * ++ * Written October 2002 by H.Schurig for M&N Logistik-Lösungen Online GmbH ++ * http://www.mn-logistik.de/unsupported/pxa250/ ++ * ++ * Number in Parentheses like (3-29) refer to pages in the ++ * ++ * Intel PXA250 and PXA210 ++ * Application Processor ++ * Developer's Manual ++ * February 2002 ++ * ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++ ++ ++/********************************************************************** ++ * ++ * reginit ++ * ++ * PURPOSE: initialize stuff using a addr/data pair table ++ * PARAMS: r0 - address the the table ++ * REGISTERS: r0, r1, r2, r3 ++ * CALLS: Nothing ++ * RETURNS: Nothing ++ **********************************************************************/ ++reginit: ++1: ldmia r0!, {r1,r2} @ load reg/value from regtable ++ cmp r1, #0 @ at end? ++ strne r2, [r1] @ if not, store value into reg ++ ldrne r3, [r1] @ if not, read it back (see PXA errata) ++ bne 1b @ if not, branch back ++ mov pc, lr ++ ++ ++/********************************************************************** ++ * ++ * memsetup ++ * ++ * PURPOSE: ++ * PARAMS: ++ * REGISTERS: ++ * CALLS: ++ * RETURNS: Nothing ++ **********************************************************************/ ++ ++.globl memsetup ++memsetup: ++ mov r11, lr ++ ++ adr r0, SystemUnitTable ++ bl reginit ++ ++ @ Steps 2a..4d ++ adr r0,MemTable1 ++ bl reginit ++ ++ @ Step 4e wait 200 usec ++ ldr r0, oscr_addr ++ ldr r1, [r0] ++ add r1,r1,#0x300 @ Current OSCR+0x300 ++1: ++ ldr r2, [r0] ++ cmp r1, r2 ++ bgt 1b ++ ++ @ TODO: data cache must be off, see Developers Manual, Section 6.12, ++ @ page 6-77, point 6. ++ ++ @ Step 4f attempt read access to trigger a number of refresh cycles ++ ldr r2, =CFG_DRAM_BASE ++.rept 8 ++ str r2, [r2] ++.endr ++ ++ @ TODO: re-enable data cache ++ ++ @ Steps 4g..4h ++ adr r0,MemTable2 ++ bl reginit ++ @ Done with memory setup ++ ++ ++ @ Check if we return from Sleep Mode via RCSR (3-33) ++ ldr r0, rcsr_addr ++ ldr r1, [r0] ++ and r1,r1,#0xf @ mask RCSR_HWR|RCSR_WDR|RCSR_SMR|RCSR_GPR ++ str r1, [r0] @ clear Reset Controll State Register ++ teq r1, #4 @ RCSR_SMR (Sleep Mode) ++ beq WakeUp ++ ++ @ Issue Frequency Change Sequence ++freqchange: ++ mov r0, #3 ++ mcr p14, 0, r0, c6, c0, 0 ++ mov pc, r11 ++ ++WakeUp: ++ @ retrieve the scratchpad value and jump to that address ++ ldr r0, pspr_addr ++ ldr pc, [r0] ++ ++ ++@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ++@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ++@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ++ ++ ++SystemUnitTable: ++ @ (4-22) Mask all interrupts ++ .long ICMR, 0x00000000 @ PM ++ @ (4-22) Interrupts are IRQs, not FIQs ++ .long ICLR, 0x00000000 ++ @ (4-23) Only enabled and unmasked interrupts bring the CPU out of idle mode ++ .long ICCR, 0x00000001 ++ @ (4-41) Clear OS Timer Match bits ++ .long OSSR, 0x0000000f @ NO PM ++ @ (3-34) Set clock register (we change CP14,6 at the end of this function) ++ .long CCCR, 0x00000161 @ NO PM, 121 is slow, 241 is medium, 161 is fast ++ @ (3-38) Enable 32 kHz Oszillator ++ .long OSCC, 0x00000002 ++ ++ @ (3-36) Enable needed clocks ++ .long CKEN, 0x00000043 @ PM: FFUART, PWM0, PWM1 ++ ++ .long 0x17c00004,8 @ CPLD: PER_PWR_EN ++ ++// Bit GPIO Level Function Direct Altern Function ++// -------------------------------------------------- ++// 00000001 0 1 nc Input 0 normal GPIO ++// 00000002 1 1 nPFI Input 0 normal GPIO ++// 00000004 2 1 BAT_DATA Input 0 normal GPIO ++// 00000008 3 1 IRQ_KEY Input 0 normal GPIO ++// 00000010 4 0 IRQ_ETH Input 0 normal GPIO ++// 00000020 5 1 nc Input 0 normal GPIO ++// 00000040 6 0 MMC_CLK Output 1 MMC_CLK ++// 00000080 7 1 IRQ_GSM Input 0 normal GPIO ++// 00000100 8 1 nPCC_S1_CD Input 0 normal GPIO ++// 00000200 9 1 nMMC_CD Input 0 normal GPIO ++// 00000400 10 1 IRQ_RTC Input 0 normal GPIO ++// 00000800 11 0 nc 3M6 Output 1 3.6 MHz ++// 00001000 12 1 nc Input 0 normal GPIO ++// 00002000 13 1 IRQ_DOCK Input 0 normal GPIO ++// 00004000 14 1 nc Input 0 normal GPIO ++// 00008000 15 1 nc nCS1 Output 2 nCS1 ++ ++// 00010000 16 1 PWM0 Output 2 PWM0 ++// 00020000 17 1 PWM1 Output 2 PWM1 ++// 00040000 18 1 RDY Input 1 RDY ++// 00080000 19 1 nPCC_S0_IRQ Input 0 normal GPIO ++// 00100000 20 1 nc Input 0 normal GPIO ++// 00200000 21 1 AC97_IRQ Input 0 normal GPIO ++// 00400000 22 1 nPCC_S1_IRQ Input 0 normal GPIO ++// 00800000 23 1 nc IRQ_GSM Input 0 normal GPIO ++// 01000000 24 0 UART_INTB Input 0 normal GPIO ++// 02000000 25 0 UART_INTC Input 0 normal GPIO ++// 04000000 26 1 UART_INTD Input 0 normal GPIO ++// 08000000 27 0 nc cpldfree Input 0 normal GPIO ++// 10000000 28 1 AUD_BITCLK Input 1 97_BITCLK ++// 20000000 29 0 AUD_SDIN0 Input 1 97_SDATAIN0 ++// 40000000 30 0 AUD_SDOUT Output 2 97_SDATAOUT ++// 80000000 31 0 AUD_SYNC Output 2 97_SYNC ++ ++ .long GPSR0, 0x00008000 @ set nCS1 ++ .long GPDR0, 0xd0038840 @ out MMC_CLK, 3M6, nCS1, PWM0, PWM1 ++ .long GAFR0_L,0x80401000 @ MMC_CLK:1, 3M6:1, nCS1:2 ++ .long GAFR0_U,0xA500001a @ PWM0:2, PWM1:2, RDY:1 ++ @ 97_BITCLK:1, 97_SDATAIN0:1, 97_SDATAOUT:2, 97_SYNC:2 ++ .long PGSR0, 0x00028000 @ sleep set: nCS1, PWM1 ++ .long GRER0, 0x00000000 @ rising edge detect: none ++ .long GFER0, 0x00000000 @ falling edge detect: none ++ ++ ++// 00000001 32 0 USB_INT Input 0 normal GPIO ++// 00000002 33 1 nCS5 Output 2 nCS5 ++// 00000004 34 1 FF_RXD Input 1 FF_RXD ++// 00000008 35 1 FF_CTS Input 1 FF_CTS ++// 00000010 36 1 FF_DCD Input 1 FF_DCD ++// 00000020 37 1 FF_DSR Input 1 FF_DSR ++// 00000040 38 1 FF_RI Input 1 FF_RI ++// 00000080 39 0 FF_TXD Output 2 FF_TXD ++// 00000100 40 0 FF_DTR Output 2 FF_DTR ++// 00000200 41 0 FF_RTS Output 2 FF_RTS ++// 00000400 42 1 BT_RXD Input 1 BT_RXD ++// 00000800 43 1 BT_TXD Output 2 BT_TXD ++// 00001000 44 0 BT_CTS Input 1 BT_CTS ++// 00002000 45 1 BT_RTS Output 2 BT_RTS ++// 00004000 46 1 IR_RXD Input 1 ICP_RXD ++// 00008000 47 0 IR_TXD Output 2 ICP_TXD ++// 00010000 48 1 nPOE Output 2 nPOE ++// 00020000 49 1 nPWE Output 2 nPWE ++// 00040000 50 1 nPIOR Output 2 nPIOR ++// 00080000 51 1 nPIOW Output 2 nPIOW ++// 00100000 52 1 nPCE1 Output 2 nPCE1 ++// 00200000 53 1 nPCE2 Output 2 nPCE2 ++// 00400000 54 0 nPKTSEL Output 2 nPKTSEL ++// 00800000 55 1 nPREG Output 2 nPREG ++// 01000000 56 1 nPWAIT Input 1 nPWAIT ++// 02000000 57 1 nIOIS16 Input 1 nIOI16 ++// 04000000 58 0 LDD0 Output 2 LDD0 ++// 08000000 59 1 LDD1 Output 2 LDD1 ++// 10000000 60 0 LDD2 Output 2 LDD2 ++// 20000000 61 1 LDD3 Output 2 LDD3 ++// 40000000 62 0 LDD4 Output 2 LDD4 ++// 80000000 63 0 LDD5 Output 2 LDD5 ++ ++ .long GPSR1, 0x00020302 @ set nCS5, FF_RTS, FF_DTR, nPWE ++ .long GPCR1, 0x00000080 @ clear FF_TXD ++ .long GPDR1, 0xfcffab82 @ out: nCS5, FF_TXD, FF_DTR, FF_RTS, BT_TXD, ++ @ BT_RTS, IR_TXD, nPOE...nPREG, LDD0..LDD5 ++ .long GAFR1_L,0x999a9558 @ ++ .long GAFR1_U,0xaaa5aaaa @ ++ .long PGSR1, 0x00020002 @ sleep set: nCS5, nPWE ++ .long GRER1, 0x00000000 @ ++ .long GFER1, 0x00000000 @ ++ ++ ++ ++// 00000001 64 0 LDD6 Output 2 LDD6 ++// 00000002 65 1 LDD7 Output 2 LDD7 ++// 00000004 66 1 LDD8 Output 2 LDD8 ++// 00000008 67 0 LDD9 Output 2 LDD9 ++// 00000010 68 1 LDD10 Output 2 LDD10 ++// 00000020 69 0 LDD11 Output 2 LDD11 ++// 00000040 70 0 LDD12 Output 2 LDD12 ++// 00000080 71 1 LDD13 Output 2 LDD13 ++// 00000100 72 0 LDD14 Output 2 LDD14 ++// 00000200 73 0 LDD15 Output 2 LDD15 ++// 00000400 74 1 FCLK Output 2 FCLK ++// 00000800 75 1 LCLK Output 2 LCLK ++// 00001000 76 1 PCLK Output 2 PCLK ++// 00002000 77 0 BIAS Output 2 ACBIAS ++// 00004000 78 1 nCS2 Output 2 nCS2 ++// 00008000 79 1 nCS3 Output 2 nCS3 ++// 00010000 80 1 nCS4 Output 2 nCS4 ++// 00020000 81 1 nc Input 0 normal GPIO ++// 00040000 82 1 nc Input 0 normal GPIO ++// 00080000 83 1 nc Input 0 normal GPIO ++// 00100000 84 1 nc Input 0 normal GPIO ++ ++ .long GPSR2, 0x0001c000 @ set nCS2..4 ++ .long GPDR2, 0x0001FFFF @ out: LDD6..nCS4 ++ .long GAFR2_L,0xaaaaaaaa @ ++ .long GAFR2_U,0x00000002 @ ++ .long PGSR2, 0x0001c000 @ sleep set: nCS2..4 ++ .long GRER2, 0x00000000 @ ++ .long GFER2, 0x00000000 @ ++ ++ @ (3-25) Power Wakeup Registers ++ .long PWER, 0x00000008 @ wake up on IRQ_KEY ++ .long PRER, 0x00000008 @ detect rising edge on IRQ_KEY ++ .long PFER, 0x00000000 @ dont detect falling edges ++ ++ @ (3-28) Power Manager Edge Detect Status Register ++ .long PEDR, 0x00000008 @ clear edge detect status for IRQ_KEY ++ ++ @ (3-29) Sleep State Register ++ .long PSSR, 0x00000030 @ clear PH and RDH ++ ++ .long PWM_CTRL0, 0 ++ .long PWM_CTRL0, 0 ++ .long PWM_PERVAL0, 512 ++ .long PWM_PERVAL1, 512 ++ .long PWM_PWDUTY0, 440 ++ .long PWM_PWDUTY1, 450 ++ ++ @ End ++ .long 0,0 ++ ++ ++ ++ ++MemTable1: ++ @ Info on this sequence is in the OS Developers Guide, Section 10.0 on page 13 ++ @ also see Developers Manual, Section 6.12 on page 6-76 ++ ++ @ write MSC0, MSC1, MSC2 (6-44) ++ .long MSC0, 0x7ff0fdc3 @ f4c0 ++ .long MSC1, 0x29842981 ++ .long MSC2, 0x29842984 ++ ++ @ no synchronous static stuff here ++ .long SXCNFG, 0x00000000 @ (6-31) ++ ++ @ write MECR (6-60), MCMEMx (6-57), MCATTx (6-58), MCIOx (6-58) ++ .long MECR, 0x00000003 ++ .long MCMEM0, 0x00020418 ++ .long MCMEM1, 0x00020418 ++ .long MCATT0, 0x0002449D ++ .long MCATT1, 0x0002449D ++ .long MCIO0, 0x00014290 ++ .long MCIO1, 0x00014290 ++ ++ @ write FLYCNFG (that register is now undocumented) ++ ++ @ OS Developers Manual: write MDREFR (6-15), K0RUN and K0PIN are ++ @ set for synchronous static memory. The desired value of ++ @ K0DB2 can be programmed. KxFREE can be deasserted. APD must ++ @ remain deasserted and SLFRSH must remain asserted. ++ @ Developers Manual: write K0RUN and E0PIN. Configure K0DB2. Retain ++ @ the current values of APD and SLFRSH. DRI must contain a ++ @ valid value. Deassert KxFREE. ++ .long MDREFR, 0x00400016 @ 2d KxFREE & APD deasserted, SLFRSH asserted ++ ++ @ Developers Manual: in systems containing Synchronous Static Memory, write ++ @ to SXCNFG, including the enable bits. ++ @.long SXCNFG, 0x00000000 @ no Synchronous Static Memory ++ ++ @ Assert K1RUN and K2RUN and configure K1DB2 and K2DB2 ++ .long MDREFR, 0x00450016 @ 4a ++ .long MDREFR, 0x00050016 @ 4b deassert SLFRFH ++ .long MDREFR, 0x00058016 @ 4c assert E1PIN ++ .long MDCNFG, 0x0A000AC8 @ 4d without DE0/DE1 (6-10) ++ .long 0,0 ++ ++oscr_addr: ++ .long OSCR ++rcsr_addr: ++ .long RCSR ++pspr_addr: ++ .long PSPR ++ ++ ++@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ++ ++ ++MemTable2: ++ .long MDCNFG, 0x0A000ACB @ 4d with DE0/DE1 ++ .long MDMRS, 0x00000000 @ 4h ++ .long MDREFR, 0x00118016 @ 5 (optional) turn APD on ++ .long 0x17C0002C, 0x00000011 @ MNCI: enable FFUART driver ++ .long 0x17c00034, 0x00000000 @ MNCI: enable flash write ++ .long 0x17c00028, 0x00000000 @ MNCI: turn off CF-Card enable ++ .long 0x17c00014, 0x00000000 @ MNCI: turn off CF-Card power ++ .long 0x10000000, 0x0000d803 @ MNCI: disable all LEDs, SCANNER_WAKE & SCANNER_TRIG on ++@ .long 0x10000000, 0x0000d80b @ MNCI: disable all LEDs, SCANNER_WAKE, SCANNER_TRIG & UARTB on ++ .long 0,0 -- cgit v1.2.3