From 73ec7248a6afa80e2db3c4560ae86d85464a71c8 Mon Sep 17 00:00:00 2001 From: Rod Whitby Date: Tue, 23 Jan 2007 05:01:14 +0000 Subject: nslu2-kernel: Moved to obsolete - replaced long ago by ixp4xx-kernel. --- packages/obsolete/nslu2/.mtn2git_empty | 0 packages/obsolete/nslu2/nslu2-kernel.inc | 256 ++ .../obsolete/nslu2/nslu2-kernel/.mtn2git_empty | 0 .../nslu2/nslu2-kernel/2.6.11-mm/.mtn2git_empty | 0 .../nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch | 13 + .../nslu2/nslu2-kernel/2.6.11-mm/defconfig | 1204 +++++++++ .../nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch | 617 +++++ .../nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch | 18 + .../nslu2/nslu2-kernel/2.6.12/.mtn2git_empty | 0 .../obsolete/nslu2/nslu2-kernel/2.6.12/defconfig | 1226 +++++++++ .../nslu2-kernel/2.6.12/disk_led_blinking.patch | 127 + .../nslu2-kernel/2.6.12/missing-exports.patch | 19 + .../nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch | 92 + .../nslu2/nslu2-kernel/2.6.12/nslu2-setup.c | 146 ++ .../nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch | 18 + .../nslu2/nslu2-kernel/2.6.14-mm/.mtn2git_empty | 0 .../2.6.14-mm/00-memory-h-page-shift.patch | 10 + .../nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch | 1036 ++++++++ .../2.6.14-mm/80-nslu2-class-device-create.patch | 20 + .../nslu2/nslu2-kernel/2.6.14-mm/defconfig | 1595 ++++++++++++ .../nslu2/nslu2-kernel/2.6.14/.mtn2git_empty | 0 .../nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch | 73 + .../nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch | 54 + .../2.6.14/10-mtdpart-redboot-fis-byteswap.patch | 70 + .../2.6.14/15-ixp4xx-writesb-l-w.patch | 31 + .../nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch | 287 +++ .../nslu2-kernel/2.6.14/19-jffs2-force-be.patch | 13 + .../nslu2/nslu2-kernel/2.6.14/20-timer.patch | 285 ++ .../nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch | 32 + .../2.6.14/29-ipv4-route-c-spinlock.patch | 11 + .../nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch | 714 +++++ .../nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch | 461 ++++ .../nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch | 125 + .../nslu2-kernel/2.6.14/60-nslu2-beeper.patch | 175 ++ .../nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch | 560 ++++ .../nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch | 267 ++ .../nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch | 11 + .../nslu2/nslu2-kernel/2.6.14/90-pegasus.patch | 13 + .../obsolete/nslu2/nslu2-kernel/2.6.14/defconfig | 1556 +++++++++++ .../nslu2/nslu2-kernel/2.6.15/.mtn2git_empty | 0 .../2.6.15/00-memory-h-page-shift.patch | 91 + .../2.6.15/10-mtdpart-redboot-fis-byteswap.patch | 70 + .../2.6.15/15-jffs2-endian-config.patch | 68 + .../nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch | 2719 ++++++++++++++++++++ .../nslu2-kernel/2.6.15/60-nslu2-beeper.patch | 184 ++ .../nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch | 272 ++ .../nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch | 560 ++++ .../nslu2/nslu2-kernel/2.6.15/85-timer.patch | 285 ++ .../obsolete/nslu2/nslu2-kernel/2.6.15/defconfig | 1617 ++++++++++++ .../obsolete/nslu2/nslu2-kernel/2.6/.mtn2git_empty | 0 .../nslu2/nslu2-kernel/2.6/40-scsi-idle.patch | 44 + .../nslu2/nslu2-kernel/2.6/91-maclist.patch | 377 +++ .../nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch | 80 + .../nslu2/nslu2-kernel/2.6/compile-switches.patch | 58 + .../nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch | 11 + .../nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch | 139 + .../nslu2/nslu2-kernel/2.6/thumb-swi.patch | 19 + .../obsolete/nslu2/nslu2-kernel/2.6/timer.patch | 24 + .../nslu2/nslu2-kernel/2.6/x1205-rtc.patch | 38 + .../nslu2/nslu2-kernel/files/.mtn2git_empty | 0 .../nslu2/nslu2-kernel/files/anonymiser.patch | 22 + packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb | 38 + packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb | 42 + packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb | 35 + 64 files changed, 17928 insertions(+) create mode 100644 packages/obsolete/nslu2/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel.inc create mode 100644 packages/obsolete/nslu2/nslu2-kernel/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/defconfig create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.12/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.12/defconfig create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.12/disk_led_blinking.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.12/missing-exports.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-setup.c create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/defconfig create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/15-jffs2-endian-config.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/85-timer.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6.15/defconfig create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/40-scsi-idle.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/91-maclist.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/compile-switches.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/thumb-swi.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/timer.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/2.6/x1205-rtc.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel/files/.mtn2git_empty create mode 100644 packages/obsolete/nslu2/nslu2-kernel/files/anonymiser.patch create mode 100644 packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb create mode 100644 packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb create mode 100644 packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb (limited to 'packages/obsolete') diff --git a/packages/obsolete/nslu2/.mtn2git_empty b/packages/obsolete/nslu2/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel.inc b/packages/obsolete/nslu2/nslu2-kernel.inc new file mode 100644 index 0000000000..a622c50f08 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel.inc @@ -0,0 +1,256 @@ +# Standard definitions for any NSLU2 Linux kernel. +# Include this file in a .bb which specifies, at least, +# PN,PV,PR for the desired kernel +# +# Define the following *before* including this file as +# required: +# +# N2K_PATCHES - full list of patches to apply, to add files +# generate a patch against /dev/null +# N2K_SUFFIX - the suffix to add after 'zImage-' in the +# deploy/images directory, should identify the image config +# +# DEFAULT_PREFERENCE is set automagically in this file as +# follows: +# +# 10 For *released* kernels +# 8 For mm or ac patched versions of released kernels +# 6 For rc patched kernels (release candidates) +# 4 For mm or ac patched rc (release candidate) kernels +# 2 For pre or bk versions +# 0 For mm or ac patched pre or bk versions +# +# -------------------------------------------------------------- +# +# Within this file bitbake variables local to the file are +# named N2K_FOO +# +SECTION = "kernel" +DESCRIPTION = "Linux kernel for the Linksys NSLU2 device" +LICENSE = "GPL" + +DEPENDS += "devio-native" + +# Linux kernel source has the general form linux-X.Y.Z-patchP, +# X.Y is the major version number, Z (which may have multiple +# parts) is a sub-version and 'patch' is something like 'mm' or +# 'ac' with a patch version. The original bz2 archive will be +# in a directory/file vX.Y/linux-X.Y.Z.tar.bz2. The unpacked +# source will be in the directory linux-X.Y.Z and this directory +# name corresponds to the module directory (in /lib/modules). +# +# The corresponding .bb file should be called: +# +# package_X.Y.Z-patchP +# +# Giving PN=package PV=X.Y.Z-patchP (and PR is set in the .bb +# file). Files, including the all important defconfig, are +# searched for in the following directories (last one first): +# +# nslu2-kernel/files +# nslu2-kernel/X.Y +# nslu2-kernel/X.Y.Z +# nslu2-kernel/X.Y.Z-patch +# nslu2-kernel/X.Y.Z-patchP +# package-X.Y.Z-patchP +# +# This allows sharing of patch files and other useful source! +# To share a file or patch with an earlier version put it in +# the shared directory - e.g. to use foo.patch on 2.6.11.2 and +# 2.6.11.4 it should be in directory nslu2-kernel/2.6.11. +# +# Note that when there are multiple patches the X.Y.Z-patch form +# uses base-patch (e.g. 2.6.12-mm) whereas X.Y.Z-patchP has the +# full form, for example 2.6.12-rc3-mm1 (in the same case). + +#PN=package-name +#PV=package-version (full) + +# The patch has the general form (rcN|preN|acN|mmN|bkN)* with the +# separate patch items being separated by '-' characters. The +# rc patch is first and has the important property that it +# requires the *preceding* kernel base version and that this +# will be the source directory name. +python () { + # The patches list may be empty. This code starts with the base + # kernel version and steps through the patches. Because the rc and + # pre patches actually require the *preceding* kernel version the code + # fixes that up appropriately. + pv = bb.data.getVar("PV",d,1).split('-') + kernel = pv[0].split('.') + base = pv[0] + name = [base] + major = '.'.join(name[0].split('.')[0:2]) + minor = '.'.join(name[0].split('.')[0:3]) + patch_uri = [ None ] + filedir = "${FILE_DIRNAME}/nslu2-kernel/%s" + # This entry will become the last one (everything is inserted before it) + filepath = [ filedir % "files" ] + pref = 10 + mmac = 0 + for patch in pv[1:]: + name.append(patch) + pname = '-'.join(name) + if patch[0:2] == "rc" or patch[0:3] == "pre": + patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/testing/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname)) + kernel[-1] = str(int(kernel[-1]) - 1) + if patch[0:2] == "rc" and pref == 10: + pref = 6 + filepath[0:0] = [ filedir % name[0] ] + filepath[0:0] = [ filedir % (name[0] + "-rc") ] + else: + pref = 2 + elif patch[0:2] == "bk" or patch[0:3] == "git": + patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/snapshots/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname)) + pref = 2 + elif patch[0:2] == "ac": + patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/alan/linux-%s/%s/patch-%s" % (major, base, pname)) + mmac = 2 + filepath[0:0] = [ filedir % (name[0] + "-ac") ] + elif patch[0:2] == "mm": + patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/akpm/patches/%s/%s/%s/%s.bz2;patch=1;pname=%s" % (major, base, pname, pname, pname)) + mmac = 2 + filepath[0:0] = [ filedir % (name[0] + "-mm") ] + else: + raise bb.build.FuncFailed("nslu2-kernel: patch %s not recognized in %s" % (patch, '-'.join(pv))) + filepath[0:0] = [ filedir % pname ] + base = pname + + base = '.'.join(kernel) + patch_uri[0] = "${KERNELORG_MIRROR}/pub/linux/kernel/v%s/linux-%s.tar.bz2" % (major, base) + filepath[-1:-1] = [ filedir % base ] + if base != minor: + filepath[-1:-1] = [ filedir % minor ] + filepath[-1:-1] = [ filedir % major ] + + bb.data.setVar("N2K_SRCMAJ", major, d) + # bb.note("N2K_SRCMAJ := %s" % major) + bb.data.setVar("N2K_SRCVER", base, d) + # bb.note("N2K_SRCVER := %s" % base) + bb.data.setVar("N2K_SRCURI", ' '.join(patch_uri), d) + # bb.note("N2K_SRCURI := %s" % ' '.join(patch_uri)) + bb.data.setVar("N2K_FILESPATH", ':'.join(filepath), d) + # bb.note("N2K_FILESPATH := %s" % ' '.join(filepath)) + bb.data.setVar("DEFAULT_PREFERENCE", pref-mmac, d) + # bb.note("DEFAULT_PREFERENCE := %s" % (pref-mmac)) +} + +# FILESPATH: this list is in order last-searched-first, therefore +# the first entry is the *latest* and/or most specific +FILESPATH = "${FILE_DIRNAME}/${P}:${N2K_FILESPATH}" + +# The working directory will be the 'base' version (which may not be the +# same as implied by the PV variable because it corresponds to the prior +# minor version for rc and pre patched versions). +S = "${WORKDIR}/linux-${N2K_SRCVER}" + +# N2K_PATCHES is the list of patches. +N2K_PATCHES ?= "" + +# Image suffix - actually set in conf/machine/nslu2.conf as it is also +# used by anything which needs to know the name of the generated image. +# Should be overridden in the distro if patches or defconfig are changed. +N2K_SUFFIX ?= "nslu2${IXP4XX_MACHINE_ENDIAN}" + +SRC_URI = "${N2K_SRCURI}" +SRC_URI += "${N2K_PATCHES}" +SRC_URI += "file://defconfig" + +COMPATIBLE_HOST = 'arm.*-linux' + +inherit kernel + +ARCH = "arm" +KERNEL_IMAGETYPE = "zImage" +# To specify the console set KERNEL_CONSOLE in the .bb file. +# CMDLINE_ROOT contains the boot options, CMDLINE_KERNEL_OPTIONS +# contains the things for a specific kernel. +CMDLINE_KERNEL_OPTIONS ?= "reboot=s" +CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc" +# Add distro specific debug (or non-debug) options to this +CMDLINE_DEBUG ?= "" +CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_KERNEL_OPTIONS} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}" + +# Set EXTRAVERSION and LOCALVERSION to "" so that the kernel version +# remains pinned to the x.y.z form, also turn off the directory +# printing which provides almost all the output of an incremental build. +EXTRA_OEMAKE += "EXTRAVERSION=" +EXTRA_OEMAKE += "LOCALVERSION=" +EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'" + +addtask unpacklocal before do_patch after do_unpack + +# NOTE: in MM kernel builds the config options (oldconfig, menuconfig +# and so on) do not allow an option to be overridden, so the following +# removes the options which must be changed. +do_configure_prepend() { + rm -f ${S}/.config + echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config' + if test '${IXP4XX_MACHINE_ENDIAN}' = be + then + echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config' + fi + if test '${SLUGOS_IMAGESEX}' = big-endian + then + echo 'CONFIG_JFFS2_BIG_ENDIAN=y' >>'${S}/.config' + fi + if test '${SLUGOS_IMAGESEX}' = little-endian + then + echo 'CONFIG_JFFS2_LITTLE_ENDIAN=y' >>'${S}/.config' + fi + sed -e '/CONFIG_CPU_BIG_ENDIAN/d' -e '/CONFIG_CMDLINE=/d' \ + -e '/CONFIG_JFFS2_NATIVE_ENDIAN=/d' \ + -e '/CONFIG_JFFS2_BIG_ENDIAN=/d' \ + -e '/CONFIG_JFFS2_LITTLE_ENDIAN=/d' \ + '${WORKDIR}/defconfig' >>'${S}/.config' + rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \ + ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch +} + +# This function adds the required prefix to the image to deal with two +# problems: +# +# 1) The machine type set by RedBoot is wrong - the type for an ixdp425, not an NSLU2 +# e3a01c02 e3811055 +# 2) For LE kernels it is necessary to prefix change-to-le code to the kernel image: +# ee110f10 e3c00080 ee010f10 +# and to byte swap the (LE) image to match the BE flash layout +# +# The argument to the function is the destination directory +redboot_fixup_armeb() { + rm -f "$1".new + devio '<"$1".new \ + 'wb 0xe3a01c02,4' \ + 'wb 0xe3811055,4' \ + 'cp$' + mv "$1".new "$1" +} + +redboot_fixup_arm() { + rm -f "$1".new + devio '<"$1".new \ + 'wb 0xe3a01c02,4' \ + 'wb 0xe3811055,4' \ + 'wb 0xee110f10,4' \ + 'wb 0xe3c00080,4' \ + 'wb 0xee010f10,4' \ + 'xp $,4' || { + echo 'ERROR: arch/${ARCH}/boot/${KERNEL_IMAGETYPE}: failed to byteswap zImage' >&2 + return 1 + } + mv "$1".new "$1" +} + +do_install_append() { + redboot_fixup '${STAGING_KERNEL_DIR}/${KERNEL_IMAGETYPE}' +} + +do_deploy[dirs] = "${S}" +do_deploy() { + install -d ${DEPLOY_DIR_IMAGE} + redboot_fixup '${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${N2K_SUFFIX}' +} + +addtask deploy before do_build after do_compile + +COMPATIBLE_MACHINE = "nslu2" diff --git a/packages/obsolete/nslu2/nslu2-kernel/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch new file mode 100644 index 0000000000..c03a0d9cda --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/bootramdisk.patch @@ -0,0 +1,13 @@ +--- linux-2.6.11/arch/arm/kernel/setup.c.orig Mon Mar 7 09:41:40 2005 ++++ linux-2.6.11/arch/arm/kernel/setup.c Mon Mar 7 09:42:15 2005 +@@ -431,8 +431,10 @@ + rd_prompt = prompt; + rd_doload = doload; + ++#if 0 /* rd_size is not exported by 2.6.11-mm1 */ + if (rd_sz) + rd_size = rd_sz; ++#endif + #endif + } + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/defconfig new file mode 100644 index 0000000000..7ca968ac66 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/defconfig @@ -0,0 +1,1204 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-mm4 +# Sat May 7 11:48:09 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +CONFIG_ARCH_NSLU2=y +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y +CONFIG_DMABOUNCE=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_MINICACHE=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMB_INTERWORK is not set +# CONFIG_ARCH_XSCALE is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y + +# +# General setup +# +CONFIG_PCI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_XIP_KERNEL is not set +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# At least one math emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_PM is not set +# CONFIG_PREEMPT is not set +# CONFIG_ARTHUR is not set +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8" +CONFIG_ALIGNMENT_TRAP=y + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PCI is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_IP_TCPDIAG=m +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_KGDBOE is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_ISCSI_IF is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_IOP3XX is not set +# CONFIG_I2C_ISA is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Hardware Sensors Chip support +# +CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +CONFIG_SENSORS_X1205=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISER4_FS=m +# CONFIG_REISER4_DEBUG is not set +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m + +# +# Caches +# +# CONFIG_FSCACHE is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# Misc devices +# + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_RW_DETECT is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m + +# +# USB Host-to-Host Cables +# +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_GENESYS=y +CONFIG_USB_NET1080=y +CONFIG_USB_PL2301=y +CONFIG_USB_KC2190=y + +# +# Intelligent USB Devices/Gadgets +# +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_ZAURUS=y +CONFIG_USB_CDCETHER=y + +# +# USB Network Adapters +# +CONFIG_USB_AX8817X=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_TEST is not set + +# +# USB ATM/DSL drivers +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch new file mode 100644 index 0000000000..b752ddac98 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/reiser4.patch @@ -0,0 +1,617 @@ +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 21:36:10.656270448 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 23:39:18.967076480 -0800 +@@ -467,19 +467,15 @@ + return 0; + } + +-#define FORMAT40_ROOT_LOCALITY 41 +-#define FORMAT40_ROOT_OBJECTID 42 ++#define FORMAT40_ROOT_LOCALITY 41ull ++#define FORMAT40_ROOT_OBJECTID 42ull + + /* plugin->u.format.root_dir_key */ + reiser4_internal const reiser4_key * + root_dir_key_format40(const struct super_block *super UNUSED_ARG) + { + static const reiser4_key FORMAT40_ROOT_DIR_KEY = { +- .el = {{(FORMAT40_ROOT_LOCALITY << 4) | KEY_SD_MINOR}, +-#if REISER4_LARGE_KEY +- {0ull}, +-#endif +- {FORMAT40_ROOT_OBJECTID}, {0ull}} ++ .el = { KEY_INIT(KEY_SD_MINOR,FORMAT40_ROOT_LOCALITY,0ull,0,FORMAT40_ROOT_OBJECTID,0ull) } + }; + + return &FORMAT40_ROOT_DIR_KEY; +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:00.618253096 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:02.747929336 -0800 +@@ -49,7 +49,7 @@ + /* 70 */ d16 formatting_policy; + /* 72 */ d64 flags; + /* 72 */ char not_used[432]; +-} format40_disk_super_block; ++} PACKED64 format40_disk_super_block; + + /* format 40 specific part of reiser4_super_info_data */ + typedef struct format40_super_info { +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:00.625252032 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:02.747929336 -0800 +@@ -240,14 +240,14 @@ + typedef struct flow_header { + d32 fl_magic; + d16 fl_nr; /* number of subfiles in the flow */ +-}; ++} PACKED32; + + typedef struct subfile_header { + d32 sh_magic; /* subfile magic */ + d16 sh_type; /* type of subfile: light-weight, ordinary, invert */ + d16 sh_arg_len; /* lenght of lookup argument (filename, key) */ + d32 sh_body_len; /* lenght of subfile body */ +-}; ++} PACKED32; + + /* functions to get/set fields of flow header */ + +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:24:00.648248536 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:34:27.331978128 -0800 +@@ -19,6 +19,38 @@ + + /* see static_stat.h for explanation */ + ++/* compile time verify of the data structure sizes and alignments */ ++static inline void ++r4static_stat_verify(void) ++{ ++ /* All these structures are PACKED, so the __alignof__ should ++ * be 1. The sizes need to be correct as they map to disk ++ * structures. ++ */ ++ cassert(sizeof (reiser4_stat_data_base) == 2); ++ /* cassert(sizeof (reiser4_light_weight_stat) == 16); ++ * 14 bytes, comments in code do not take into account PACKED! ++ */ ++ cassert(sizeof (reiser4_light_weight_stat) == 14); ++ cassert(sizeof (reiser4_unix_stat) == 28); ++ cassert(sizeof (reiser4_symlink_stat) == 0); ++ cassert(sizeof (reiser4_plugin_slot) == 4); ++ cassert(sizeof (reiser4_plugin_stat) == 2); ++ cassert(sizeof (reiser4_flags_stat) == 4); ++ /* cassert(sizeof (reiser4_capabilities_stat) == 16); ++ * comments in the file look wrong - capabilities are 2 x d32 ++ * not 2 x d64 in the declaration. ++ */ ++ cassert(sizeof (reiser4_capabilities_stat) == 8); ++ cassert(sizeof (reiser4_cluster_stat) == 1); ++ cassert(sizeof (reiser4_crypto_stat) == 2); ++ /* cassert(sizeof (reiser4_large_times_stat) == 24); ++ * should be 12 bytes - 3 x d32, probably a bug in the def in ++ * the header file (meant to be 3 x d64?) ++ */ ++ cassert(sizeof (reiser4_large_times_stat) == 12); ++} ++ + /* helper function used while we are dumping/loading inode/plugin state + to/from the stat-data. */ + +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:00.629251424 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:02.749929032 -0800 +@@ -26,7 +26,7 @@ + obj_key_id id; + /* file name. Null terminated string. */ + d8 name[0]; +-} directory_entry_format; ++} PACKEDt(obj_key_id) directory_entry_format; + + void print_de(const char *prefix, coord_t * coord); + int extract_key_de(const coord_t * coord, reiser4_key * key); +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:00.632250968 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:02.750928880 -0800 +@@ -15,12 +15,12 @@ + typedef struct cde_unit_header { + de_id hash; + d16 offset; +-} cde_unit_header; ++} PACKEDt2(de_id,d16) cde_unit_header; + + typedef struct cde_item_format { + d16 num_of_entries; + cde_unit_header entry[0]; +-} cde_item_format; ++} PACKEDt2(d16,cde_unit_header) cde_item_format; + + typedef struct cde_entry { + const struct inode *dir; +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:13.758284416 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:30.786695704 -0800 +@@ -7,7 +7,7 @@ + typedef struct { + reiser4_dblock_nr start; + reiser4_dblock_nr width; +-} reiser4_extent; ++} PACKED64 reiser4_extent; + + typedef struct extent_stat { + int unallocated_units; +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/internal.h 2005-03-27 21:33:08.971890672 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/item/internal.h 2005-03-27 22:15:43.290575208 -0800 +@@ -13,7 +13,7 @@ + typedef struct internal_item_layout { + /* 0 */ reiser4_dblock_nr pointer; + /* 4 */ +-} internal_item_layout; ++} PACKED64 internal_item_layout; + + struct cut_list; + +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:00.646248840 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:02.750928880 -0800 +@@ -26,7 +26,7 @@ + obj_key_id id; + /* file name. Null terminated string. */ + d8 name[0]; +-} directory_entry_format; ++} PACKEDt(obj_key_id) directory_entry_format; + + void print_de(const char *prefix, coord_t * coord); + int extract_key_de(const coord_t * coord, reiser4_key * key); +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node40.c 2005-03-27 21:24:00.654247624 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/node/node40.c 2005-03-27 21:35:08.677692624 -0800 +@@ -32,6 +32,22 @@ + magic (32) + flush_time (32) + */ ++/* compile time verify of the data structure sizes and alignments */ ++static inline void ++r4node40_stat_verify(void) ++{ ++ /* The alignment of these structures is intended to be '1', but ++ * it doesn't matter so long as the size is right. ++ */ ++ cassert(sizeof (common_node_header) == 2); ++ cassert(sizeof (node40_header) == 28); ++#if REISER4_LARGE_KEY ++ cassert(sizeof (item_header40) == 38); ++#else ++ cassert(sizeof (item_header40) == 30); ++#endif ++} ++ + /* NIKITA-FIXME-HANS: I told you guys not less than 10 times to not call it r4fs. Change to "ReIs". */ + /* magic number that is stored in ->magic field of node header */ + static const __u32 REISER4_NODE_MAGIC = 0x52344653; /* (*(__u32 *)"R4FS"); */ +--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:00.656247320 -0800 ++++ linux-2.6.11/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:02.753928424 -0800 +@@ -250,7 +250,7 @@ + /* identifier of node plugin. Must be located at the very beginning + of a node. */ + d16 plugin_id; +-} common_node_header; ++} PACKED16 common_node_header; + + /* __REISER4_NODE_H__ */ + #endif +--- linux-2.6.11/.pc/reiser4/fs/reiser4/debug.c 2005-03-27 21:24:00.563261456 -0800 ++++ linux-2.6.11/fs/reiser4/debug.c 2005-03-27 23:27:58.569512632 -0800 +@@ -75,6 +75,72 @@ + va_list args; + + /* ++ * this is here to make sure that we don't compile code which we ++ * know a-priori will panic, or fail without panicing, since this ++ * compiles first if you find a duplicate case label error then ++ * you need to rewrite this code to match your compiler. ++ */ ++ cassert(sizeof (d8) == 1); ++ cassert(__alignof__ (d8) == 1); ++ { ++ struct { ++ __u8 pad; ++ d8 data; ++ } PACKED8 test; ++ cassert(sizeof test == 2); ++ cassert(sizeof test.data == 1); ++ cassert(__alignof__ test.data == 1); ++ cassert(__alignof__ test == 1); ++ } ++ cassert(sizeof (d16) == 2); ++ cassert(__alignof__ (d16) == 2); ++ { ++ struct { ++ __u8 pad; ++ d16 data; ++ } PACKED16 test; ++ cassert(sizeof test == 4); ++ cassert(sizeof test.data == 2); ++#if !__arm__ ++ cassert(__alignof__ test.data == 2); ++#endif ++ cassert(__alignof__ test == 2); ++#if !__arm__ ++ cassert(test.data.datum - &test.pad == 2); ++#endif ++ } ++ cassert(sizeof (d32) == 4); ++ cassert(__alignof__ (d32) == 4); ++ { ++ struct { ++ __u8 pad; ++ d32 data; ++ } PACKED32 test; ++ cassert(sizeof test == 8); ++ cassert(sizeof test.data == 4); ++ cassert(__alignof__ test.data == 4); ++ cassert(__alignof__ test == 4); ++ cassert(test.data.datum - &test.pad == 4); ++ } ++ cassert(sizeof (d64) == 8); ++ cassert(__alignof__ (d64) == 8); ++ { ++ struct { ++ __u8 pad; ++ d64 data; ++ } PACKED64 test; ++ cassert(sizeof test == 16); ++ cassert(sizeof test.data == 8); ++ cassert(__alignof__ test.data == 8); ++ cassert(__alignof__ test == 8); ++ cassert(test.data.datum - &test.pad == 8); ++ } ++ ++ /* This is just a test of a struct with a single d64 element. */ ++ cassert(sizeof (reiser4_dblock_nr) == 8); ++ cassert(__alignof__(reiser4_dblock_nr) == 8); ++ ++ /* + * check for recursive panic. + */ + if (in_panic == 0) { +--- linux-2.6.11/.pc/reiser4/fs/reiser4/flush_queue.c 2005-03-27 21:24:00.577259328 -0800 ++++ linux-2.6.11/fs/reiser4/flush_queue.c 2005-03-27 21:24:02.755928120 -0800 +@@ -447,7 +447,7 @@ + + /* If all write requests registered in this "fq" are done we up + * the semaphore. */ +- if (atomic_sub_and_test(bio->bi_vcnt, &fq->nr_submitted)) ++ if (atomic_sub_return(bio->bi_vcnt, &fq->nr_submitted) == 0) + up(&fq->io_sem); + } + +--- linux-2.6.11/.pc/reiser4/fs/reiser4/key.c 2005-03-27 22:42:43.481268784 -0800 ++++ linux-2.6.11/fs/reiser4/key.c 2005-03-27 23:42:53.958392832 -0800 +@@ -13,10 +13,10 @@ + independent of key scheme. */ + static const reiser4_key MINIMAL_KEY = { + .el = { +- {0ull}, +- ON_LARGE_KEY({0ull},) +- {0ull}, +- {0ull} ++ {{0,0,0,0,0,0,0,0}}, ++ ON_LARGE_KEY({{0,0,0,0,0,0,0,0}},) ++ {{0,0,0,0,0,0,0,0}}, ++ {{0,0,0,0,0,0,0,0}} + } + }; + +@@ -24,10 +24,10 @@ + independent of key scheme. */ + static const reiser4_key MAXIMAL_KEY = { + .el = { +- {~0ull}, +- ON_LARGE_KEY({~0ull},) +- {~0ull}, +- {~0ull} ++ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}}, ++ ON_LARGE_KEY({{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},) ++ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}}, ++ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}} + } + }; + +--- linux-2.6.11/.pc/reiser4/fs/reiser4/safe_link.c 2005-03-27 21:24:00.677244128 -0800 ++++ linux-2.6.11/fs/reiser4/safe_link.c 2005-03-27 21:24:02.756927968 -0800 +@@ -61,7 +61,7 @@ + reiser4_key sdkey; /* key of stat-data for the file safe-link is + * for */ + d64 size; /* size to which file should be truncated */ +-} safelink_t; ++} PACKEDt2(reiser4_key, d64) safelink_t; + + /* + * locality where safe-link items are stored. Next to the objectid of root +--- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.c 2005-03-27 21:24:00.682243368 -0800 ++++ linux-2.6.11/fs/reiser4/status_flags.c 2005-03-27 21:24:02.756927968 -0800 +@@ -153,6 +153,7 @@ + &statuspage->stacktrace[no]) + + GETFRAME(0); ++#ifndef __arm__ + GETFRAME(1); + GETFRAME(2); + GETFRAME(3); +@@ -162,6 +163,7 @@ + GETFRAME(7); + GETFRAME(8); + GETFRAME(9); ++#endif + + #undef GETFRAME + #endif +--- linux-2.6.11/.pc/reiser4/fs/reiser4/dformat.h 2005-03-27 21:24:00.564261304 -0800 ++++ linux-2.6.11/fs/reiser4/dformat.h 2005-03-27 23:29:03.223683704 -0800 +@@ -28,43 +28,84 @@ + + /* code on-disk data-types as structs with a single field + to rely on compiler type-checking. Like include/asm-i386/page.h */ ++/* This code did not work on the arm with gcc 3.4.3 because the ++ * arm has a minimum structure size of 4 - packed is necessary to ++ * allow these types to be smaller than 4 - and because this version ++ * of gcc 'loses' the alignment if the structure contains just one ++ * element of alignment 8 (or probably any value greater than 4). ++ * To fix this and to make the code much more portable all the basic ++ * types are now just done as arrays of bytes - __u8. ++ * ++ * This is highly tricky, however the check code in debug.c should ++ * fire a compile time assert if it goes wrong. ++ */ ++#if __arm__ ++#define PACKED8 __attribute__ ((packed,aligned(1))) ++/* Warning: the presence of the packed attribute here means that any ++ * d16 in a structure so marked will lose its alignment. That doesn't ++ * seem to matter because there don't seem to be any d16's with odd ++ * structure offsets, but it might. ++ */ ++#define PACKED16 __attribute__ ((packed,aligned(2))) ++#define PACKED32 __attribute__ ((aligned(4))) ++#define PACKED64 __attribute__ ((aligned(8))) ++#else ++#define PACKED8 __attribute__ ((aligned(1))) ++#define PACKED16 __attribute__ ((aligned(2))) ++#define PACKED32 __attribute__ ((aligned(4))) ++#define PACKED64 __attribute__ ((aligned(8))) ++#endif + typedef struct d8 { +- __u8 datum; +-} d8 __attribute__ ((aligned(1))); ++ __u8 datum[1]; ++} PACKED8 d8; + typedef struct d16 { +- __u16 datum; +-} d16 __attribute__ ((aligned(2))); ++ __u8 datum[2]; ++} PACKED16 d16; + typedef struct d32 { +- __u32 datum; +-} d32 __attribute__ ((aligned(4))); ++ __u8 datum[4]; ++} PACKED32 d32; + typedef struct d64 { +- __u64 datum; +-} d64 __attribute__ ((aligned(8))); ++ __u8 datum[8]; ++} PACKED64 d64; + ++#define PACKEDt(t) __attribute__ ((packed,aligned(__alignof__ (t)) )) ++#define PACKEDt2(t1,t2) __attribute__ ((packed,aligned(\ ++ __alignof__ (t1) < __alignof__ (t2) ? __alignof__ (t2) : __alignof__ (t1) ))) + #define PACKED __attribute__((packed)) + + static inline __u8 + d8tocpu(const d8 * ondisk /* on-disk value to convert */ ) + { +- return ondisk->datum; ++ return ondisk->datum[0]; + } + + static inline __u16 + d16tocpu(const d16 * ondisk /* on-disk value to convert */ ) + { +- return __le16_to_cpu(get_unaligned(&ondisk->datum)); ++ return ondisk->datum[0] + (ondisk->datum[1] << 8); + } + + static inline __u32 + d32tocpu(const d32 * ondisk /* on-disk value to convert */ ) + { +- return __le32_to_cpu(get_unaligned(&ondisk->datum)); ++ return ondisk->datum[0] + ++ (ondisk->datum[1] << 8) + ++ (ondisk->datum[2] << 16) + ++ (ondisk->datum[3] << 24); + } + + static inline __u64 + d64tocpu(const d64 * ondisk /* on-disk value to convert */ ) + { +- return __le64_to_cpu(get_unaligned(&ondisk->datum)); ++ __u32 low = ondisk->datum[0] + ++ (ondisk->datum[1] << 8) + ++ (ondisk->datum[2] << 16) + ++ (ondisk->datum[3] << 24); ++ __u64 high = ondisk->datum[4] + ++ (ondisk->datum[5] << 8) + ++ (ondisk->datum[6] << 16) + ++ (ondisk->datum[7] << 24); ++ return low + (high << 32); + } + + static inline d8 * +@@ -72,7 +113,7 @@ + d8 * ondisk /* result */ ) + { + assert("nikita-1264", oncpu < 0x100); +- put_unaligned(oncpu, &ondisk->datum); ++ ondisk->datum[0] = oncpu; + return ondisk; + } + +@@ -81,7 +122,8 @@ + d16 * ondisk /* result */ ) + { + assert("nikita-1265", oncpu < 0x10000); +- put_unaligned(__cpu_to_le16(oncpu), &ondisk->datum); ++ ondisk->datum[0] = oncpu; ++ ondisk->datum[1] = oncpu >> 8; + return ondisk; + } + +@@ -89,15 +131,27 @@ + cputod32(__u32 oncpu /* CPU value to convert */ , + d32 * ondisk /* result */ ) + { +- put_unaligned(__cpu_to_le32(oncpu), &ondisk->datum); ++ ondisk->datum[0] = oncpu; oncpu >>= 8; ++ ondisk->datum[1] = oncpu; oncpu >>= 8; ++ ondisk->datum[2] = oncpu; oncpu >>= 8; ++ ondisk->datum[3] = oncpu; + return ondisk; + } + + static inline d64 * +-cputod64(__u64 oncpu /* CPU value to convert */ , ++cputod64(__u64 oncpuIn /* CPU value to convert */ , + d64 * ondisk /* result */ ) + { +- put_unaligned(__cpu_to_le64(oncpu), &ondisk->datum); ++ __u32 oncpu = oncpuIn; ++ ondisk->datum[0] = oncpu; oncpu >>= 8; ++ ondisk->datum[1] = oncpu; oncpu >>= 8; ++ ondisk->datum[2] = oncpu; oncpu >>= 8; ++ ondisk->datum[3] = oncpu; ++ oncpu = oncpuIn >> 32; ++ ondisk->datum[4] = oncpu; oncpu >>= 8; ++ ondisk->datum[5] = oncpu; oncpu >>= 8; ++ ondisk->datum[6] = oncpu; oncpu >>= 8; ++ ondisk->datum[7] = oncpu; + return ondisk; + } + +@@ -111,7 +165,7 @@ + /* data-type for block number on disk, disk format */ + union reiser4_dblock_nr { + d64 blk; +-}; ++} PACKED64; + + static inline reiser4_block_nr + dblock_to_cpu(const reiser4_dblock_nr * dblock) +@@ -148,7 +202,7 @@ + char uuid[16]; /* unique id */ + char label[16]; /* filesystem label */ + d64 diskmap; /* location of the diskmap. 0 if not present */ +-} reiser4_master_sb; ++} PACKED64 reiser4_master_sb; + + /* __FS_REISER4_DFORMAT_H__ */ + #endif +--- linux-2.6.11/.pc/reiser4/fs/reiser4/kassign.h 2005-03-27 21:24:00.588257656 -0800 ++++ linux-2.6.11/fs/reiser4/kassign.h 2005-03-27 21:24:02.757927816 -0800 +@@ -46,7 +46,7 @@ + d8 locality[sizeof (__u64)]; + ON_LARGE_KEY(d8 ordering[sizeof (__u64)];) + d8 objectid[sizeof (__u64)]; +-} obj_key_id; ++} PACKED8 obj_key_id; + + /* Information sufficient to uniquely identify directory entry within + compressed directory item. +@@ -57,7 +57,7 @@ + ON_LARGE_KEY(d8 ordering[sizeof (__u64)];) + d8 objectid[sizeof (__u64)]; + d8 offset[sizeof (__u64)]; +-} de_id; ++} PACKED8 de_id; + + extern int inode_onwire_size(const struct inode *obj); + extern char *build_inode_onwire(const struct inode *obj, char *area); +--- linux-2.6.11/.pc/reiser4/fs/reiser4/key.h 2005-03-27 21:24:00.591257200 -0800 ++++ linux-2.6.11/fs/reiser4/key.h 2005-03-27 23:41:07.744539792 -0800 +@@ -106,7 +106,7 @@ + union reiser4_key { + d64 el[KEY_LAST_INDEX]; + int pad; +-}; ++} PACKED64; + + /* bitmasks showing where within reiser4_key particular key is + stored. */ +@@ -138,6 +138,20 @@ + KEY_ORDERING_SHIFT = 0, + } reiser4_key_field_shift; + ++/* initialise a key, this is a compile time constant initialiser expressed as ++ * three or four (as appropriate) 8 byte initialisers, there are braces around ++ * each 8 byte quantity but not around the whole initializer. ++ */ ++#define KEY_INIT(type,loc,order,band,oid,off)\ ++{{ (0xf&(type))+(0xf0&((loc) << 4)), 0xff&((loc) >> 4), 0xff&((loc) >> 12), 0xff&((loc) >> 20),\ ++ 0xff&((loc) >> 28), 0xff&((loc) >> 36), 0xff&((loc) >> 44), 0xff&((loc) >> 52) }},\ ++ON_LARGE_KEY({{ 0xff&(order), 0xff&((order)>>8), 0xff&((order)>>16), 0xff&((order)>>24),\ ++ 0xff&((order)>>32), 0xff&((order)>>40), 0xff&((order)>>48), 0xff&((order)>>56) }},)\ ++{{ 0xff&(oid), 0xff&((oid)>>8), 0xff&((oid)>>16), 0xff&((oid)>>24),\ ++ 0xff&((oid)>>32), 0xff&((oid)>>40), 0xff&((oid)>>48), (0xf&((oid)>>56))+(0xf0&((band)<<4))}},\ ++{{ 0xff&(off), 0xff&((off)>>8), 0xff&((off)>>16), 0xff&((off)>>24),\ ++ 0xff&((off)>>32), 0xff&((off)>>40), 0xff&((off)>>48), 0xff&((off)>>56) }} ++ + static inline __u64 + get_key_el(const reiser4_key * key, reiser4_key_field_index off) + { +--- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.h 2005-03-27 21:24:00.682243368 -0800 ++++ linux-2.6.11/fs/reiser4/status_flags.h 2005-03-27 21:24:02.758927664 -0800 +@@ -33,7 +33,7 @@ + last sector where io error happened if status is "io error encountered" */ + d64 stacktrace[10]; /* Last ten functional calls made (addresses)*/ + char texterror[REISER4_TEXTERROR_LEN]; /* Any error message if appropriate, otherwise filled with zeroes */ +-}; ++} PACKED64; + + int reiser4_status_init(reiser4_block_nr block); + int reiser4_status_query(u64 *status, u64 *extended); +--- linux-2.6.11/.pc/reiser4/fs/reiser4/wander.h 2005-03-27 21:24:00.709239264 -0800 ++++ linux-2.6.11/fs/reiser4/wander.h 2005-03-27 22:14:59.663207576 -0800 +@@ -19,7 +19,7 @@ + struct journal_header { + /* last written transaction head location */ + d64 last_committed_tx; +-}; ++} PACKED64; + + typedef struct journal_location { + reiser4_block_nr footer; +@@ -46,7 +46,7 @@ + super block */ + d64 nr_files; + d64 next_oid; +-}; ++} PACKED64; + + /* Each wander record (except the first one) has unified format with wander + record header followed by an array of log entries */ +@@ -66,7 +66,7 @@ + + /* number of previous block in commit */ + d64 next_block; +-}; ++} PACKED64; + + /* The first wander record (transaction head) of written transaction has the + special format */ +@@ -98,7 +98,7 @@ + separately from super block */ + d64 nr_files; + d64 next_oid; +-}; ++} PACKED64; + + /* A transaction gets written to disk as a set of wander records (each wander + record size is fs block) */ +@@ -108,7 +108,7 @@ + struct wander_entry { + d64 original; /* block original location */ + d64 wandered; /* block wandered location */ +-}; ++} PACKED64; + + /* REISER4 JOURNAL WRITER FUNCTIONS */ + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch new file mode 100644 index 0000000000..6ef6befd73 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.11-mm/x1205-rtc.c-mm.patch @@ -0,0 +1,18 @@ +--- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005 ++++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005 +@@ -139,7 +139,6 @@ + }; + + static struct i2c_client x1205_i2c_client = { +- .id = I2C_DRIVERID_X1205, + .flags = 0, + .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit + .adapter = NULL, // the adapter we sit on assigned in attach +@@ -301,7 +300,6 @@ + int errno; + + x1205_i2c_client.adapter = adapter; +- x1205_i2c_client.id++; + + if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver + return -EIO; diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/defconfig new file mode 100644 index 0000000000..9397245b99 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/defconfig @@ -0,0 +1,1226 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12 +# Sat Jun 18 17:17:09 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +CONFIG_ARCH_NSLU2=y +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMB_INTERWORK is not set +# CONFIG_ARCH_XSCALE is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_DISCONTIGMEM is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PCI is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_IP_TCPDIAG=m +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +# CONFIG_I2C_ISA is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Hardware Sensors Chip support +# +CONFIG_I2C_SENSOR=y +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +CONFIG_SENSORS_X1205=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m + +# +# USB Host-to-Host Cables +# +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_GENESYS=y +CONFIG_USB_NET1080=y +CONFIG_USB_PL2301=y +CONFIG_USB_KC2190=y + +# +# Intelligent USB Devices/Gadgets +# +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_ZAURUS=y +CONFIG_USB_CDCETHER=y + +# +# USB Network Adapters +# +CONFIG_USB_AX8817X=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_TEST is not set + +# +# USB ATM/DSL drivers +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/disk_led_blinking.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/disk_led_blinking.patch new file mode 100644 index 0000000000..7487cf3ee8 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/disk_led_blinking.patch @@ -0,0 +1,127 @@ +--- linux-2.6.12.2/drivers/usb/core/hub.c.bak 2005-09-19 20:29:14.000000000 +0000 ++++ linux-2.6.12.2/drivers/usb/core/hub.c 2005-09-19 20:30:44.000000000 +0000 +@@ -1026,6 +1026,19 @@ + + dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum); + ++ // --- Forward-Ported Linksys Disk 1 & Disk 2 LED Control (Port done 16.Sept.05 by Philipp Kirchhofer) --- ++ // Copy & paste from nslu2-io.c ++ #define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++ #define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++ // Copy & Paste end ++ ++ if (*udev->devpath == 0x31) { ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; ++ } else if (*udev->devpath == 0x32) { ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; ++ } ++ // --- End LED Control --- ++ + /* Free up all the children before we remove this device */ + for (i = 0; i < USB_MAXCHILDREN; i++) { + if (udev->children[i]) +@@ -2175,6 +2188,19 @@ + udev->bus->controller->driver->name, + udev->devnum); + ++ // --- Start LED Control --- ++ // Copy & paste from nslu2-io.c ++ #define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++ #define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ // Copy & Paste end ++ ++ if (*udev->devpath == 0x31) { ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; ++ } else if (*udev->devpath == 0x32) { ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; ++ } ++ // --- End LED Control --- ++ + /* Set up TT records, if needed */ + if (hdev->tt) { + udev->tt = hdev->tt; +--- linux-2.6.12.2/drivers/usb/storage/transport.c.bak 2005-09-19 20:29:25.000000000 +0000 ++++ linux-2.6.12.2/drivers/usb/storage/transport.c 2005-09-19 20:29:55.000000000 +0000 +@@ -60,6 +60,60 @@ + #include "scsiglue.h" + #include "debug.h" + ++// --- Forward-Ported Linksys Disk 1 & Disk 2 LED Activity Blinking Part 1 (Port done 16.Sept.05 by Philipp Kirchhofer) --- ++// Copy & Paste from nslu2-io.c ++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ ++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++// Copy & Paste End ++ ++#define JIFFIES_BLINKING_TIME 6 ++#define ON_LED_INTERVAL 3 ++unsigned long turn_on_time; ++ ++static struct timer_list usb1_led_timer; /* ide led switch */ ++static struct timer_list usb2_led_timer; /* ide led switch */ ++ ++// Turns on Disk 1 LED ++static void turn_on_led_usb1(unsigned long ptr) { ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; // 0xfff7 ++ return; ++} ++ ++// Turns on Disk 2 LED ++static void turn_on_led_usb2(unsigned long ptr) { ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; // 0xfffb ++ return; ++} ++ ++// Turns on Disk 1 LED after ON_LED_INTERVAL jiffies ++static void usb_1_led_timer(void) { ++ usb1_led_timer.expires = jiffies + ON_LED_INTERVAL; ++ add_timer(&usb1_led_timer); ++ return; ++} ++ ++// Turns on Disk 2 LED after ON_LED_INTERVAL jiffies ++static void usb_2_led_timer(void) { ++ usb2_led_timer.expires = jiffies + ON_LED_INTERVAL; ++ add_timer(&usb2_led_timer); ++ return; ++} ++ ++// Initializes Timers ++unsigned long initialized_timers = 0; ++static void initializeTimers() { ++ if (initialized_timers != 1) { ++ init_timer(&usb1_led_timer); ++ usb1_led_timer.function = turn_on_led_usb1; ++ init_timer(&usb2_led_timer); ++ usb2_led_timer.function = turn_on_led_usb2; ++ initialized_timers = 1; ++ } ++} ++// --- End Disk LED Activity Blinking Part 1 --- + + /*********************************************************************** + * Data transfer routines +@@ -499,6 +553,21 @@ + + /* are we scatter-gathering? */ + if (use_sg) { ++ // --- Disk LED Activity Blinking Part 2 --- ++ initializeTimers(); ++ if ((jiffies - turn_on_time) >= JIFFIES_BLINKING_TIME) { ++ if (*us->pusb_dev->devpath == 0x31) { ++ del_timer_sync(&usb1_led_timer); ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; ++ usb_1_led_timer(); ++ } else if (*us->pusb_dev->devpath == 0x32) { ++ del_timer_sync(&usb2_led_timer); ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; ++ usb_2_led_timer(); ++ } ++ turn_on_time = jiffies; ++ } ++ // --- End Disk LED Activity Blinking Part 2 --- + /* use the usb core scatter-gather primitives */ + result = usb_stor_bulk_transfer_sglist(us, pipe, + (struct scatterlist *) buf, use_sg, diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/missing-exports.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/missing-exports.patch new file mode 100644 index 0000000000..935dd29115 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/missing-exports.patch @@ -0,0 +1,19 @@ +--- linux-2.6.12/drivers/char/random.c~ 2005-05-14 16:42:24.000000000 -0400 ++++ linux-2.6.12/drivers/char/random.c 2005-05-14 16:42:46.000000000 -0400 +@@ -646,6 +646,7 @@ extern void add_input_randomness(unsigne + add_timer_randomness(&input_timer_state, + (type << 4) ^ code ^ (code >> 4) ^ value); + } ++EXPORT_SYMBOL_GPL(add_input_randomness); + + void add_interrupt_randomness(int irq) + { +--- linux-2.6.12/lib/kobject_uevent.c~ 2005-05-14 16:45:13.000000000 -0400 ++++ linux-2.6.12/lib/kobject_uevent.c 2005-05-14 16:45:27.000000000 -0400 +@@ -178,6 +178,7 @@ static inline int send_uevent(const char + + #ifdef CONFIG_HOTPLUG + char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug"; ++EXPORT_SYMBOL_GPL(hotplug_path); + u64 hotplug_seqnum; + static DEFINE_SPINLOCK(sequence_lock); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch new file mode 100644 index 0000000000..6a41f02355 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-arch.patch @@ -0,0 +1,92 @@ +--- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700 ++++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700 +@@ -37,6 +37,7 @@ + defined(CONFIG_ARCH_INTEGRATOR) || \ + defined(CONFIG_ARCH_PXA) || \ + defined(CONFIG_ARCH_IXP4XX) || \ ++ defined(CONFIG_ARCH_NSLU2) || \ + defined(CONFIG_ARCH_IXP2000) || \ + defined(CONFIG_ARCH_LH7A40X) || \ + defined(CONFIG_ARCH_OMAP) +--- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800 ++++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700 +@@ -47,3 +47,8 @@ + orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) + #endif + ++#ifdef CONFIG_ARCH_NSLU2 ++ mov r7, #(MACH_TYPE_NSLU2 & 0xff) ++ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) ++#endif ++ +--- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700 ++++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700 +@@ -43,6 +43,12 @@ + IXDP465 Development Platform (Also known as BMP). + For more information on this platform, see . + ++config ARCH_NSLU2 ++ bool "NSLU2" ++ help ++ Say 'Y' here if you want your kernel to support Linksys's ++ NSLU2 NAS device. For more information on this platform, ++ see http://www.nslu2-linux.org + + # + # IXCDP1100 is the exact same HW as IXDP425, but with a different machine +--- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:27.365770810 -0700 ++++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:32.560983303 -0700 +@@ -8,4 +8,4 @@ + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +- ++obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o +--- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types 2005-06-17 17:51:27.423762020 -0700 ++++ linux-2.6.11/arch/arm/tools/mach-types 2005-06-17 17:51:32.564982697 -0700 +@@ -604,7 +604,7 @@ + roverp7 MACH_ROVERP7 ROVERP7 594 + pr818s MACH_PR818S PR818S 595 + trxpro MACH_TRXPRO TRXPRO 596 +-nslu2 MACH_NSLU2 NSLU2 597 ++nslu2 ARCH_NSLU2 NSLU2 597 + e400 MACH_E400 E400 598 + trab MACH_TRAB TRAB 599 + cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 +--- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800 ++++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700 +@@ -94,7 +94,11 @@ + struct resource *res; + }; + ++#ifdef CONFIG_ARCH_NSLU2 ++static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; ++#else + static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; ++#endif + + static int ixp4xx_flash_remove(struct device *_dev) + { +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700 +@@ -44,5 +44,6 @@ + #include "ixdp425.h" + #include "coyote.h" + #include "prpmc1100.h" ++#include "nslu2.h" + + #endif /* _ASM_ARCH_HARDWARE_H */ +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700 +@@ -93,4 +93,11 @@ + #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 + #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + ++/* ++ * NSLU2 board IRQs ++ */ ++#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 ++#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 ++#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 ++ + #endif diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-setup.c b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-setup.c new file mode 100644 index 0000000000..fcb8566784 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/nslu2-setup.c @@ -0,0 +1,146 @@ +/* + * arch/arm/mach-ixp4xx/nslu2-setup.c + * + * NSLU2 board-setup + * + * based ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * Author: Mark Rakes + * Maintainers: http://www.nslu2-linux.org/ + * + * Fixed missing init_time in MACHINE_START kas11 10/22/04 + * Changed to conform to new style __init ixdp425 kas11 10/22/04 + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +void __init nslu2_map_io(void) +{ + ixp4xx_map_io(); +} + +static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource nslu2_flash_resource = { + .start = NSLU2_FLASH_BASE, + .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nslu2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &nslu2_flash_data, + }, + .num_resources = 1, + .resource = &nslu2_flash_resource, +}; + +static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { + .sda_pin = NSLU2_SDA_PIN, + .scl_pin = NSLU2_SCL_PIN, +}; + +static struct platform_device nslu2_i2c_controller = { + .name = "IXP4XX-I2C", + .id = 0, + .dev = { + .platform_data = &nslu2_i2c_gpio_pins, + }, + .num_resources = 0 +}; + +static struct resource nslu2_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port nslu2_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + } +}; + +static struct platform_device nslu2_uart = { + .name = "serial8250", + .id = 0, + .dev.platform_data = nslu2_uart_data, + .num_resources = 2, + .resource = nslu2_uart_resources +}; + +static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, + &nslu2_uart +}; + +static void n2_power_off(void) +{ + /* This causes the box to drop the power and go dead. */ +#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 + *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio + *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed +} + +static void __init nslu2_init(void) +{ + ixp4xx_sys_init(); + + pm_power_off = n2_power_off; + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); +} + +MACHINE_START(NSLU2, "Linksys NSLU2") + BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, + IXP4XX_PERIPHERAL_BASE_VIRT) + MAPIO(nslu2_map_io) + INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here + .timer = &ixp4xx_timer, + // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? + BOOT_PARAMS(0x0100) + INIT_MACHINE(nslu2_init) +MACHINE_END + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch new file mode 100644 index 0000000000..6ef6befd73 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.12/x1205-rtc.c-id.patch @@ -0,0 +1,18 @@ +--- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005 ++++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005 +@@ -139,7 +139,6 @@ + }; + + static struct i2c_client x1205_i2c_client = { +- .id = I2C_DRIVERID_X1205, + .flags = 0, + .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit + .adapter = NULL, // the adapter we sit on assigned in attach +@@ -301,7 +300,6 @@ + int errno; + + x1205_i2c_client.adapter = adapter; +- x1205_i2c_client.id++; + + if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver + return -EIO; diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch new file mode 100644 index 0000000000..999b69e851 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/00-memory-h-page-shift.patch @@ -0,0 +1,10 @@ +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h.orig 2005-11-07 23:16:48.456117450 -0800 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h 2005-11-07 23:16:58.160728123 -0800 +@@ -8,6 +8,7 @@ + #define __ASM_ARCH_MEMORY_H + + #include ++#include + + /* + * Physical DRAM offset. diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch new file mode 100644 index 0000000000..67cbd4cdf4 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/30-i2c-x1205-mm1.patch @@ -0,0 +1,1036 @@ +--- linux-2.6.14/drivers/i2c/chips/Kconfig.orig 2005-11-07 22:30:30.413306237 -0800 ++++ linux-2.6.14/drivers/i2c/chips/Kconfig 2005-11-07 22:41:15.785916976 -0800 +@@ -126,13 +126,13 @@ config SENSORS_MAX6875 + This driver can also be built as a module. If so, the module + will be called max6875. + +-config RTC_X1205_I2C +- tristate "Xicor X1205 RTC chip" +- depends on I2C && EXPERIMENTAL +- help +- If you say yes here you get support for the Xicor X1205 RTC chip. ++config SENSORS_X1205 ++ tristate "Xicor X1205 RTC chip" ++ depends on I2C ++ help ++ If you say yes here you get support for the Xicor X1205 RTC chip. + +- This driver can also be built as a module. If so, the module +- will be called x1205. ++ This driver can also be built as a module. If so, the module ++ will be called x1205 + + endmenu +--- linux-2.6.14/drivers/i2c/chips/Makefile.orig 2005-11-07 22:30:30.417306489 -0800 ++++ linux-2.6.14/drivers/i2c/chips/Makefile 2005-11-07 22:41:59.616675071 -0800 +@@ -13,7 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591 + obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + obj-$(CONFIG_TPS65010) += tps65010.o +-obj-$(CONFIG_RTC_X1205_I2C) += x1205.o ++obj-$(CONFIG_SENSORS_X1205) += x1205.o + + ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) + EXTRA_CFLAGS += -DDEBUG +--- linux-2.6.14/drivers/i2c/chips/x1205.c.orig 2005-11-07 22:30:30.421306741 -0800 ++++ linux-2.6.14/drivers/i2c/chips/x1205.c 2005-11-07 22:42:54.960157617 -0800 +@@ -1,14 +1,16 @@ + /* +- * x1205.c - An i2c driver for the Xicor X1205 RTC ++ * linux/drivers/i2c/chips/x1205.c ++ * ++ * x1205.c - An 12c driver for the Xicor X1205 RTC + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * please send all reports to: + * kas11 at tampabay dot rr dot com + * a dot zummo at towertech dot it +- * ++ * + * based on the other drivers in this same directory. +- * ++ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or +@@ -26,83 +28,36 @@ + + #include + +-#define DRV_VERSION "0.9.9" ++#define EPOCH_1900 1900 ++#define EPOCH_1970 1970 ++ ++#define DRIVER_VERSION "0.9.6" ++#define DRIVER_NAME (x1205_driver.name) + +-/* Addresses to scan: none. This chip is located at +- * 0x6f and uses a two bytes register addressing. +- * Two bytes need to be written to read a single register, +- * while most other chips just require one and take the second +- * one as the data to be written. To prevent corrupting +- * unknown chips, the user must explicitely set the probe parameter. +- */ + +-static unsigned short normal_i2c[] = { I2C_CLIENT_END }; ++/* Addresses to scan */ ++static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END }; + + /* Insmod parameters */ + I2C_CLIENT_INSMOD; + I2C_CLIENT_MODULE_PARM(hctosys, + "Set the system time from the hardware clock upon initialization"); + +-/* offsets into CCR area */ +- +-#define CCR_SEC 0 +-#define CCR_MIN 1 +-#define CCR_HOUR 2 +-#define CCR_MDAY 3 +-#define CCR_MONTH 4 +-#define CCR_YEAR 5 +-#define CCR_WDAY 6 +-#define CCR_Y2K 7 +- +-#define X1205_REG_SR 0x3F /* status register */ +-#define X1205_REG_Y2K 0x37 +-#define X1205_REG_DW 0x36 +-#define X1205_REG_YR 0x35 +-#define X1205_REG_MO 0x34 +-#define X1205_REG_DT 0x33 +-#define X1205_REG_HR 0x32 +-#define X1205_REG_MN 0x31 +-#define X1205_REG_SC 0x30 +-#define X1205_REG_DTR 0x13 +-#define X1205_REG_ATR 0x12 +-#define X1205_REG_INT 0x11 +-#define X1205_REG_0 0x10 +-#define X1205_REG_Y2K1 0x0F +-#define X1205_REG_DWA1 0x0E +-#define X1205_REG_YRA1 0x0D +-#define X1205_REG_MOA1 0x0C +-#define X1205_REG_DTA1 0x0B +-#define X1205_REG_HRA1 0x0A +-#define X1205_REG_MNA1 0x09 +-#define X1205_REG_SCA1 0x08 +-#define X1205_REG_Y2K0 0x07 +-#define X1205_REG_DWA0 0x06 +-#define X1205_REG_YRA0 0x05 +-#define X1205_REG_MOA0 0x04 +-#define X1205_REG_DTA0 0x03 +-#define X1205_REG_HRA0 0x02 +-#define X1205_REG_MNA0 0x01 +-#define X1205_REG_SCA0 0x00 +- +-#define X1205_CCR_BASE 0x30 /* Base address of CCR */ +-#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ +- +-#define X1205_SR_RTCF 0x01 /* Clock failure */ +-#define X1205_SR_WEL 0x02 /* Write Enable Latch */ +-#define X1205_SR_RWEL 0x04 /* Register Write Enable */ +- +-#define X1205_DTR_DTR0 0x01 +-#define X1205_DTR_DTR1 0x02 +-#define X1205_DTR_DTR2 0x04 +- +-#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ +- + /* Prototypes */ ++ + static int x1205_attach(struct i2c_adapter *adapter); + static int x1205_detach(struct i2c_client *client); + static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); +-static int x1205_command(struct i2c_client *client, unsigned int cmd, +- void *arg); ++static int x1205_validate_client(struct i2c_client *client); ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base); ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base); ++static int x1205_validate_tm(struct rtc_time *tm); ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); ++static int x1205_hctosys(struct i2c_client *client); ++ + + static struct i2c_driver x1205_driver = { + .owner = THIS_MODULE, +@@ -110,6 +65,7 @@ static struct i2c_driver x1205_driver = + .flags = I2C_DF_NOTIFY, + .attach_adapter = &x1205_attach, + .detach_client = &x1205_detach, ++/* .command = &x1205_command,*/ + }; + + struct x1205_data { +@@ -118,8 +74,9 @@ struct x1205_data { + unsigned int epoch; + }; + +-static const unsigned char days_in_mo[] = +- { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; ++ ++static const unsigned char days_in_mo[] = ++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; + + static LIST_HEAD(x1205_clients); + +@@ -127,6 +84,7 @@ static LIST_HEAD(x1205_clients); + * commands to a specific client. This function will send the command + * to the first client. + */ ++ + int x1205_do_command(unsigned int cmd, void *arg) + { + struct list_head *walk; +@@ -141,114 +99,98 @@ int x1205_do_command(unsigned int cmd, v + return -ENODEV; + } + +-#define is_leap(year) \ +- ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) +- +-/* make sure the rtc_time values are in bounds */ +-static int x1205_validate_tm(struct rtc_time *tm) +-{ +- int year = tm->tm_year + 1900; +- +- if ((tm->tm_year < 70) || (tm->tm_year > 255)) +- return -EINVAL; +- +- if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) +- return -EINVAL; +- +- if (tm->tm_mday > days_in_mo[tm->tm_mon] +- + ((tm->tm_mon == 1) && is_leap(year))) +- return -EINVAL; +- +- if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) +- return -EINVAL; +- +- return 0; +-} + + /* +- * In the routines that deal directly with the x1205 hardware, we use ++ * in the routines that deal directly with the x1205 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch +- * Epoch is initialized as 2000. Time is set to UTC. ++ * Epoch is inited as 2000. Time is set to UT + */ ++ + static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, + u8 reg_base) + { +- unsigned char dt_addr[2] = { 0, reg_base }; +- static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; ++ static unsigned char dt_addr[] = { 0, }; ++ static unsigned char sr_addr[] = { 0, }; + +- unsigned char buf[8], sr; ++ unsigned char buf[8], sr; + + struct i2c_msg msgs[] = { +- { client->addr, 0, 2, sr_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 1, &sr }, /* read status */ +- { client->addr, 0, 2, dt_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 8, buf }, /* read date */ ++ { client->addr, 0, 2, sr_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &sr }, ++ { client->addr, 0, 2, dt_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 8, buf }, + }; + +- struct x1205_data *data = i2c_get_clientdata(client); ++ struct x1205_data *xdata = i2c_get_clientdata(client); + +- /* read status register */ +- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } ++ dt_addr[1] = reg_base; ++ sr_addr[1] = X1205_REG_SR; + +- /* check for battery failure */ +- if (sr & X1205_SR_RTCF) { +- dev_warn(&client->dev, +- "Clock had a power failure, you must set the date.\n"); +- return -EINVAL; +- } ++ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) == ++ ARRAY_SIZE(msgs)) { ++ /* did we read the correct number of messages? */ ++ ++ /* check for battery failure */ ++ if (sr & X1205_SR_RTCF) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Clock had a power failure, you must set the date.\n", ++ DRIVER_NAME); + +- /* read date registers */ +- if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } +- +- dev_dbg(&client->dev, +- "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " +- "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", +- __FUNCTION__, +- buf[0], buf[1], buf[2], buf[3], +- buf[4], buf[5], buf[6], buf[7]); +- +- tm->tm_sec = BCD2BIN(buf[CCR_SEC]); +- tm->tm_min = BCD2BIN(buf[CCR_MIN]); +- tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ +- tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); +- tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); +- data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; +- tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900; +- tm->tm_wday = buf[CCR_WDAY]; ++ return -EINVAL; ++ } + +- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " +- "mday=%d, mon=%d, year=%d, wday=%d\n", +- __FUNCTION__, +- tm->tm_sec, tm->tm_min, tm->tm_hour, +- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ dev_dbg(&client->dev, ++ "%s: raw read data - sec-%02x min-%02x hr-%02x" ++ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", ++ __FUNCTION__, ++ buf[0], buf[1], buf[2], buf[3], ++ buf[4], buf[5], buf[6], buf[7]); ++ ++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); ++ tm->tm_min = BCD2BIN(buf[CCR_MIN]); ++ buf[CCR_HOUR] &= ~X1205_HR_MIL; ++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */ ++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); ++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); ++ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; ++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900; ++ tm->tm_wday = buf[CCR_WDAY]; ++ ++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + ++ } else { ++ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ + return 0; + } + ++ + static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, + int datetoo, u8 reg_base) + { + int i, err, xfer; + +- unsigned char buf[8]; ++ static unsigned char wel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL }; + +- static const unsigned char wel[3] = { 0, X1205_REG_SR, +- X1205_SR_WEL }; + +- static const unsigned char rwel[3] = { 0, X1205_REG_SR, +- X1205_SR_WEL | X1205_SR_RWEL }; ++ static unsigned char rwel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL | X1205_SR_RWEL }; + +- static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; ++ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; + +- struct x1205_data *data = i2c_get_clientdata(client); ++ static unsigned char data[3] = { 0, }; ++ static unsigned char buf[8]; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); + +- /* check if all values in the tm struct are correct */ + if ((err = x1205_validate_tm(tm)) < 0) + return err; + +@@ -258,124 +200,52 @@ static int x1205_set_datetime(struct i2c + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + +- buf[CCR_SEC] = BIN2BCD(tm->tm_sec); +- buf[CCR_MIN] = BIN2BCD(tm->tm_min); + +- /* set hour and 24hr bit */ ++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN] = BIN2BCD(tm->tm_min); ++ ++ /* Set 24HR format */ + buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; + +- /* should we also set the date? */ +- if (datetoo) { +- buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); ++ if (datetoo == X1205_DATETOO) { ++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); + + /* month, 0 - 11 */ +- buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); ++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */ + + /* year, since 1900 */ +- buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); +- buf[CCR_WDAY] = tm->tm_wday & 0x07; +- buf[CCR_Y2K] = BIN2BCD(data->epoch / 100); ++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch)); ++ buf[CCR_WDAY] = tm->tm_wday & 7; ++ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100); + } + +- /* this sequence is required to unlock the chip */ + xfer = i2c_master_send(client, wel, 3); +- if (xfer != 3) { +- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); ++ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) + return -EIO; +- } + + xfer = i2c_master_send(client, rwel, 3); +- if (xfer != 3) { +- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); ++ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) + return -EIO; +- } + +- /* write register's data */ +- for (i = 0; i < (datetoo ? 8 : 3); i++) { +- unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; +- +- xfer = i2c_master_send(client, rdata, 3); +- if (xfer != 3) { +- dev_err(&client->dev, +- "%s: xfer=%d addr=%02x, data=%02x\n", +- __FUNCTION__, +- xfer, rdata[1], rdata[2]); ++ for (i = 0; i < 8; i++) { ++ data[1] = i + reg_base; ++ data[2] = buf[i]; ++ xfer = i2c_master_send(client, data, 3); ++ ++ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n", ++ __FUNCTION__, ++ xfer, data[1], data[2]); ++ ++ if (xfer != 3) + return -EIO; +- } + }; + +- /* disable further writes */ + xfer = i2c_master_send(client, diswe, 3); +- if (xfer != 3) { +- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); +- return -EIO; +- } +- +- return 0; +-} +- +-static int x1205_get_dtrim(struct i2c_client *client, int *trim) +-{ +- unsigned char dtr; +- static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; +- +- struct i2c_msg msgs[] = { +- { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ +- }; +- +- /* read dtr register */ +- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } +- +- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); +- +- *trim = 0; +- +- if (dtr & X1205_DTR_DTR0) +- *trim += 20; +- +- if (dtr & X1205_DTR_DTR1) +- *trim += 10; +- +- if (dtr & X1205_DTR_DTR2) +- *trim = -*trim; +- +- return 0; +-} +- +-static int x1205_get_atrim(struct i2c_client *client, int *trim) +-{ +- s8 atr; +- static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; +- +- struct i2c_msg msgs[] = { +- { client->addr, 0, 2, atr_addr }, /* setup read ptr */ +- { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ +- }; +- +- /* read atr register */ +- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { +- dev_err(&client->dev, "%s: read error\n", __FUNCTION__); +- return -EIO; +- } +- +- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); +- +- /* atr is a two's complement value on 6 bits, +- * perform sign extension. The formula is +- * Catr = (atr * 0.25pF) + 11.00pF. +- */ +- if (atr & 0x20) +- atr |= 0xC0; +- +- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); +- +- *trim = (atr * 250) + 11000; +- +- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); ++ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; + + return 0; + } +@@ -386,24 +256,28 @@ static int x1205_hctosys(struct i2c_clie + + struct rtc_time tm; + struct timespec tv; ++ + + err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); + +- if (err) { +- dev_err(&client->dev, +- "Unable to set the system clock\n"); ++ if (err) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Unable to set the system clock\n", ++ DRIVER_NAME); ++ + return err; ++ + } + +- /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary +- * whether it stores the most close value or the value with partial +- * seconds truncated. However, it is important that we use it to store +- * the truncated value. This is because otherwise it is necessary, +- * in an rtc sync function, to read both xtime.tv_sec and +- * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read +- * of >32bits is not possible. So storing the most close value would +- * slow down the sync API. So here we have the truncated value and +- * the best guess is to add 0.5s. ++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether ++ * it stores the most close value or the value with partial seconds ++ * truncated, however it is important for x1205_sync_rtc that it be ++ * defined to store the truncated value. This is because otherwise it ++ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the ++ * sync function, and atomic reads of >32bits on ARM are not possible. ++ * So storing the most close value would slow down the sync API. So ++ * Here we have the truncated value and the best guess is to add 0.5s + */ + + tv.tv_nsec = NSEC_PER_SEC >> 1; +@@ -413,15 +287,16 @@ static int x1205_hctosys(struct i2c_clie + * the month to be in the range 1-12 + */ + +- tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, ++ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, + tm.tm_min, tm.tm_sec); + + do_settimeofday(&tv); + +- dev_info(&client->dev, +- "setting the system clock to %d-%d-%d %d:%d:%d\n", +- tm.tm_year + 1900, tm.tm_mon + 1, ++ dev_info(&client->adapter->dev, ++ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n", ++ DRIVER_NAME, ++ tm.tm_year + EPOCH_1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, tm.tm_min, + tm.tm_sec); + +@@ -432,7 +307,7 @@ struct x1205_limit + { + unsigned char reg; + unsigned char mask; +- unsigned char min; ++ unsigned char min; + unsigned char max; + }; + +@@ -443,16 +318,34 @@ static int x1205_validate_client(struct + /* Probe array. We will read the register at the specified + * address and check if the given bits are zero. + */ +- static const unsigned char probe_zero_pattern[] = { +- /* register, mask */ ++ ++ const unsigned char probe_zero_pattern[] = { ++ + X1205_REG_SR, 0x18, ++ X1205_REG_Y2K, 0xC6, ++ X1205_REG_DW, 0xF8, ++ X1205_REG_MO, 0xE0, ++ X1205_REG_DT, 0xC0, ++ X1205_REG_HR, 0x40, ++ X1205_REG_MN, 0x80, ++ X1205_REG_SC, 0x80, + X1205_REG_DTR, 0xF8, + X1205_REG_ATR, 0xC0, + X1205_REG_INT, 0x18, + X1205_REG_0, 0xFF, ++ X1205_REG_Y2K1, 0xC6, ++ X1205_REG_DWA1, 0x78, ++ X1205_REG_MOA1, 0x60, ++ X1205_REG_DTA1, 0x40, ++ X1205_REG_HRA1, 0x40, ++ X1205_REG_Y2K0, 0xC6, ++ X1205_REG_DWA0, 0x78, ++ X1205_REG_MOA0, 0x60, ++ X1205_REG_DTA0, 0x40, ++ X1205_REG_HRA0, 0x40, + }; + +- static const struct x1205_limit probe_limits_pattern[] = { ++ const struct x1205_limit probe_limits_pattern[] = { + /* register, mask, min, max */ + { X1205_REG_Y2K, 0xFF, 19, 20 }, + { X1205_REG_DW, 0xFF, 0, 6 }, +@@ -463,23 +356,41 @@ static int x1205_validate_client(struct + { X1205_REG_MN, 0xFF, 0, 59 }, + { X1205_REG_SC, 0xFF, 0, 59 }, + { X1205_REG_Y2K1, 0xFF, 19, 20 }, ++ { X1205_REG_DWA1, 0x7F, 0, 6 }, ++ { X1205_REG_MOA1, 0x7F, 0, 12 }, ++ { X1205_REG_DTA1, 0x7F, 0, 31 }, ++ { X1205_REG_HRA1, 0x7F, 0, 23 }, ++ { X1205_REG_MNA1, 0x7F, 0, 59 }, ++ { X1205_REG_SCA1, 0x7F, 0, 59 }, + { X1205_REG_Y2K0, 0xFF, 19, 20 }, ++ { X1205_REG_DWA0, 0x7F, 0, 6 }, ++ { X1205_REG_MOA0, 0x7F, 0, 12 }, ++ { X1205_REG_DTA0, 0x7F, 0, 31 }, ++ { X1205_REG_HRA0, 0x7F, 0, 23 }, ++ { X1205_REG_MNA0, 0x7F, 0, 59 }, ++ { X1205_REG_SCA0, 0x7F, 0, 59 }, + }; + + /* check that registers have bits a 0 where expected */ +- for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { ++ ++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) ++ { + unsigned char buf; + +- unsigned char addr[2] = { 0, probe_zero_pattern[i] }; ++ static unsigned char addr[2]; + + struct i2c_msg msgs[2] = { +- { client->addr, 0, 2, addr }, ++ { client->addr, 0, 2, addr }, /* random read */ + { client->addr, I2C_M_RD, 1, &buf }, + }; + ++ addr[0] = 0x00; ++ addr[1] = probe_zero_pattern[i]; ++ + xfer = i2c_transfer(client->adapter, msgs, 2); ++ + if (xfer != 2) { +- dev_err(&client->adapter->dev, ++ dev_dbg(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + +@@ -487,42 +398,47 @@ static int x1205_validate_client(struct + } + + if ((buf & probe_zero_pattern[i+1]) != 0) { +- dev_err(&client->adapter->dev, +- "%s: register=%02x, zero pattern=%d, value=%x\n", ++ dev_dbg(&client->adapter->dev, ++ "%s: register %x, zero pattern %d: %x\n", + __FUNCTION__, addr[1], i, buf); + + return -ENODEV; + } + } + +- /* check limits (only registers with bcd values) */ +- for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { +- unsigned char reg, value; ++ /* check limits */ + +- unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; ++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) ++ { ++ unsigned char buf, val; ++ ++ static unsigned char addr[2]; + + struct i2c_msg msgs[2] = { +- { client->addr, 0, 2, addr }, +- { client->addr, I2C_M_RD, 1, ® }, ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &buf }, + }; + ++ addr[0] = 0x00; ++ addr[1] = probe_limits_pattern[i].reg; ++ + xfer = i2c_transfer(client->adapter, msgs, 2); + + if (xfer != 2) { +- dev_err(&client->adapter->dev, ++ dev_dbg(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + +- value = BCD2BIN(reg & probe_limits_pattern[i].mask); ++ val = BCD2BIN(buf & probe_limits_pattern[i].mask); + +- if (value > probe_limits_pattern[i].max || +- value < probe_limits_pattern[i].min) { ++ if (val > probe_limits_pattern[i].max || ++ val < probe_limits_pattern[i].min) { + dev_dbg(&client->adapter->dev, +- "%s: register=%x, lim pattern=%d, value=%d\n", +- __FUNCTION__, addr[1], i, value); ++ "%s: register %x, lim pattern %d: %d\n", ++ __FUNCTION__, addr[1], i, val); + + return -ENODEV; + } +@@ -538,79 +454,66 @@ static int x1205_attach(struct i2c_adapt + return i2c_probe(adapter, &addr_data, x1205_probe); + } + +-int x1205_direct_attach(int adapter_id, +- struct i2c_client_address_data *address_data) +-{ +- int err; +- struct i2c_adapter *adapter = i2c_get_adapter(adapter_id); +- +- if (adapter) { +- err = i2c_probe(adapter, +- address_data, x1205_probe); +- +- i2c_put_adapter(adapter); +- +- return err; +- } +- +- return -ENODEV; +-} +- + static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) + { +- struct i2c_client *client; +- struct x1205_data *data; ++ struct i2c_client *new_client; ++ struct x1205_data *xdata; + + int err = 0; + + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + +- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { +- err = -ENODEV; +- goto exit; +- } +- +- if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) { ++ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + +- /* Initialize our structures */ +- data->epoch = 2000; ++ /* Fill our data structure */ + +- client = &data->client; +- client->addr = address; +- client->driver = &x1205_driver; +- client->adapter = adapter; ++ memset(xdata, 0, sizeof(struct x1205_data)); + +- strlcpy(client->name, "x1205", I2C_NAME_SIZE); ++ xdata->epoch = 2000; ++ ++ ++ /* Prepare i2c_client structure */ ++ ++ new_client = &xdata->client; ++ i2c_set_clientdata(new_client, xdata); ++ new_client->addr = address; ++ new_client->adapter = adapter; ++ new_client->driver = &x1205_driver; ++ new_client->flags = 0; ++ ++ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE); + +- i2c_set_clientdata(client, data); + + /* Verify the chip is really an X1205 */ +- if (kind < 0) { +- if (x1205_validate_client(client) < 0) { ++ ++ if (kind < 0) ++ { ++ if (x1205_validate_client(new_client) < 0) { + err = -ENODEV; + goto exit_kfree; + } + } + + /* Inform the i2c layer */ +- if ((err = i2c_attach_client(client))) ++ if ((err = i2c_attach_client(new_client))) + goto exit_kfree; + +- list_add(&data->list, &x1205_clients); ++ list_add(&xdata->list, &x1205_clients); + +- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); ++ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n", ++ DRIVER_NAME); + +- /* If requested, set the system time */ ++ /* If requested, se the system time */ + if (hctosys) +- x1205_hctosys(client); ++ x1205_hctosys(new_client); + + return 0; + + exit_kfree: +- kfree(data); ++ kfree(xdata); + + exit: + return err; +@@ -620,23 +523,44 @@ static int x1205_detach(struct i2c_clien + { + int err; + struct x1205_data *data = i2c_get_clientdata(client); +- ++ + dev_dbg(&client->dev, "%s\n", __FUNCTION__); + + if ((err = i2c_detach_client(client))) + return err; + + list_del(&data->list); +- + kfree(data); ++ return 0; ++} ++ ++/* make sure the rtc_time values are in bounds */ ++static int x1205_validate_tm(struct rtc_time *tm) ++{ ++ tm->tm_year += 1900; ++ ++ if (tm->tm_year < EPOCH_1970) ++ return -EINVAL; ++ ++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) ++ return -EINVAL; ++ ++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && ++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) ++ return -EINVAL; ++ ++ if ((tm->tm_year -= EPOCH_1900) > 255) ++ return -EINVAL; ++ ++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) ++ return -EINVAL; + + return 0; + } + +-static int x1205_command(struct i2c_client *client, unsigned int cmd, +- void *param) ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) + { +- if (param == NULL) ++ if (client == NULL || tm == NULL) + return -EINVAL; + + if (!capable(CAP_SYS_TIME)) +@@ -646,34 +570,26 @@ static int x1205_command(struct i2c_clie + + switch (cmd) { + case X1205_CMD_GETDATETIME: +- return x1205_get_datetime(client, param, X1205_CCR_BASE); ++ return x1205_get_datetime(client, tm, X1205_CCR_BASE); + + case X1205_CMD_SETTIME: +- return x1205_set_datetime(client, param, 0, +- X1205_CCR_BASE); ++ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE); + + case X1205_CMD_SETDATETIME: +- return x1205_set_datetime(client, param, 1, +- X1205_CCR_BASE); ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE); + + case X1205_CMD_GETALARM: +- return x1205_get_datetime(client, param, X1205_ALM0_BASE); ++ return x1205_get_datetime(client, tm, X1205_ALM0_BASE); + + case X1205_CMD_SETALARM: +- return x1205_set_datetime(client, param, 1, +- X1205_ALM0_BASE); +- +- case X1205_CMD_GETDTRIM: +- return x1205_get_dtrim(client, param); +- +- case X1205_CMD_GETATRIM: +- return x1205_get_atrim(client, param); ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE); + + default: + return -EINVAL; + } + } + ++ + static int __init x1205_init(void) + { + return i2c_add_driver(&x1205_driver); +@@ -689,10 +605,8 @@ MODULE_AUTHOR( + "Alessandro Zummo "); + MODULE_DESCRIPTION("Xicor X1205 RTC driver"); + MODULE_LICENSE("GPL"); +-MODULE_VERSION(DRV_VERSION); + + EXPORT_SYMBOL_GPL(x1205_do_command); +-EXPORT_SYMBOL_GPL(x1205_direct_attach); + + module_init(x1205_init); + module_exit(x1205_exit); +--- linux-2.6.14/include/linux/x1205.h.orig 2005-11-07 22:38:42.196252187 -0800 ++++ linux-2.6.14/include/linux/x1205.h 2005-11-07 22:42:54.960157617 -0800 +@@ -1,31 +1,67 @@ +-/* +- * x1205.h - defines for drivers/i2c/chips/x1205.c +- * Copyright 2004 Karen Spearel +- * Copyright 2005 Alessandro Zummo +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License, or +- * (at your option) any later version. +- */ +- +-#ifndef __LINUX_X1205_H__ +-#define __LINUX_X1205_H__ + + /* commands */ + +-#define X1205_CMD_GETDATETIME 0 +-#define X1205_CMD_SETTIME 1 +-#define X1205_CMD_SETDATETIME 2 ++#define X1205_CMD_GETDATETIME 0 ++#define X1205_CMD_SETTIME 1 ++#define X1205_CMD_SETDATETIME 2 + #define X1205_CMD_GETALARM 3 + #define X1205_CMD_SETALARM 4 +-#define X1205_CMD_GETDTRIM 5 +-#define X1205_CMD_SETDTRIM 6 +-#define X1205_CMD_GETATRIM 7 +-#define X1205_CMD_SETATRIM 8 ++ ++/* flags */ ++ ++#define X1205_NODATE 0 ++#define X1205_DATETOO 1 ++ ++/* offsets into read buf - add 2 for write buf */ ++ ++#define CCR_SEC 0 ++#define CCR_MIN 1 ++#define CCR_HOUR 2 ++#define CCR_MDAY 3 ++#define CCR_MONTH 4 ++#define CCR_YEAR 5 ++#define CCR_WDAY 6 ++#define CCR_Y2K 7 ++ ++#define X1205_REG_SR 0x3F /* status register */ ++#define X1205_REG_Y2K 0x37 ++#define X1205_REG_DW 0x36 ++#define X1205_REG_YR 0x35 ++#define X1205_REG_MO 0x34 ++#define X1205_REG_DT 0x33 ++#define X1205_REG_HR 0x32 ++#define X1205_REG_MN 0x31 ++#define X1205_REG_SC 0x30 ++#define X1205_REG_DTR 0x13 ++#define X1205_REG_ATR 0x12 ++#define X1205_REG_INT 0x11 ++#define X1205_REG_0 0x10 ++#define X1205_REG_Y2K1 0x0F ++#define X1205_REG_DWA1 0x0E ++#define X1205_REG_YRA1 0x0D ++#define X1205_REG_MOA1 0x0C ++#define X1205_REG_DTA1 0x0B ++#define X1205_REG_HRA1 0x0A ++#define X1205_REG_MNA1 0x09 ++#define X1205_REG_SCA1 0x08 ++#define X1205_REG_Y2K0 0x07 ++#define X1205_REG_DWA0 0x06 ++#define X1205_REG_YRA0 0x05 ++#define X1205_REG_MOA0 0x04 ++#define X1205_REG_DTA0 0x03 ++#define X1205_REG_HRA0 0x02 ++#define X1205_REG_MNA0 0x01 ++#define X1205_REG_SCA0 0x00 ++ ++#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */ ++#define X1205_CCR_BASE 0x30 /* Base address of CCR */ ++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ ++ ++#define X1205_SR_RTCF 0x01 ++#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */ ++#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */ ++ ++#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */ + + extern int x1205_do_command(unsigned int cmd, void *arg); +-extern int x1205_direct_attach(int adapter_id, +- struct i2c_client_address_data *address_data); + +-#endif /* __LINUX_X1205_H__ */ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch new file mode 100644 index 0000000000..116f95b2f7 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/80-nslu2-class-device-create.patch @@ -0,0 +1,20 @@ +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c.orig 2005-11-07 22:26:36.010556202 -0800 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c 2005-11-07 22:27:15.921067613 -0800 +@@ -504,7 +504,7 @@ static int __init n2iom_init(void) + return -EBUSY; + } + else { +- class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); + } + #endif + +@@ -513,7 +513,7 @@ static int __init n2iom_init(void) + return -EBUSY; + } + else { +- class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); + } + + return 0; diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/defconfig new file mode 100644 index 0000000000..ecb422f0d7 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14-mm/defconfig @@ -0,0 +1,1595 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14 +# Mon Nov 7 22:59:39 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SWAP_PREFETCH=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +CONFIG_MACH_NSLU2=y +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_PHYSDEV=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=m +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI Transport Layers +# +# CONFIG_SAS_CLASS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +# CONFIG_ACX is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +# CONFIG_KGDBOE is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=m + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_X1205=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +CONFIG_VIDEO_BT848=m +# CONFIG_VIDEO_SAA6588 is not set +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_TUNER_3036=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_DPC=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_OVCAMCHIP=m + +# +# Radio Adapters +# +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_VIDEO_VIDEOBUF=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_BUF=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Speakup console speech +# +# CONFIG_SPEAKUP is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_PWC=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_GOTEMP is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +# CONFIG_REISER4_FS is not set +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ASFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch new file mode 100644 index 0000000000..f3da2e093f --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch @@ -0,0 +1,73 @@ +--- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700 ++++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700 +@@ -38,10 +38,14 @@ + #define BYTE1(h) ((h) & 0xFF) + #endif + ++#define FLASHWORD(a) (*(__u16*)(a)) ++#define FLASHVAL(a) FLASHWORD(a) ++#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0) ++ + static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) + { + map_word val; +- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs); ++ val.x[0] = FLASHVAL(map->map_priv_1 + ofs); + return val; + } + +@@ -53,19 +57,25 @@ static map_word ixp4xx_read16(struct map + static void ixp4xx_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) + { +- int i; +- u8 *dest = (u8 *) to; +- u16 *src = (u16 *) (map->map_priv_1 + from); +- u16 data; +- +- for (i = 0; i < (len / 2); i++) { +- data = src[i]; +- dest[i * 2] = BYTE0(data); +- dest[i * 2 + 1] = BYTE1(data); ++ u8 *dest, *src; ++ ++ if (len <= 0) ++ return; ++ ++ dest = (u8 *) to; ++ src = (u8 *) (map->map_priv_1 + from); ++ if (from & 1) ++ *dest++ = BYTE1(FLASHVAL(src-1)), ++src, --len; ++ ++ while (len >= 2) { ++ u16 data = FLASHVAL(src); src += 2; ++ *dest++ = BYTE0(data); ++ *dest++ = BYTE1(data); ++ len -= 2; + } + +- if (len & 1) +- dest[len - 1] = BYTE0(src[i]); ++ if (len > 0) ++ *dest++ = BYTE0(FLASHVAL(src)); + } + + /* +@@ -75,7 +85,7 @@ static void ixp4xx_copy_from(struct map_ + static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) + { + if (!(adr & 1)) +- *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; ++ FLASHSET(map->map_priv_1 + adr, d.x[0]); + } + + /* +@@ -83,7 +93,7 @@ static void ixp4xx_probe_write16(struct + */ + static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) + { +- *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; ++ FLASHSET(map->map_priv_1 + adr, d.x[0]); + } + + struct ixp4xx_flash_info { diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch new file mode 100644 index 0000000000..0b50e4e1a0 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-ixp4xx-le.patch @@ -0,0 +1,54 @@ +--- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700 ++++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700 +@@ -22,6 +22,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -30,17 +31,40 @@ + + #include + ++/* On a little-endian IXP4XX system (tested on NSLU2) an LDRH or STRH ++ * will flip the second address bit - i.e. XOR the address with 10b. ++ * This causes the cfi commands (sent to the command address, 0xAA for ++ * 16 bit flash) to fail. This is fixed here by XOR'ing the address ++ * before use with 10b. The cost of this is that the flash layout ends ++ * up with pdp-endiannes (on an LE system), however this is not a problem ++ * as the access code consistently only accesses half words - so the ++ * endianness is not determinable on stuff which is written and read ++ * consistently in the little endian world. ++ * ++ * For flash data from the big-endian world, however, the results are ++ * weird - the pdp-endianness results in the data apparently being ++ * 2-byte swapped (as in dd conv=swab). To work round this the 16 ++ * bit values are written and read using cpu_to_cfi16 and cfi16_to_cpu, ++ * by default these are no-ops, but if the MTD driver is configed with ++ * CONFIG_MTD_CFI_BE_BYTE_SWAP the macros will byte swap the data, ++ * resulting in a consistently BE view of the flash on both BE (no ++ * op) and LE systems. This config setting also causes the command ++ * data from the CFI implementation to get swapped - as is required ++ * so that this code will *unswap* it and give the correct command ++ * data to the flash. ++ */ + #ifndef __ARMEB__ + #define BYTE0(h) ((h) & 0xFF) + #define BYTE1(h) (((h) >> 8) & 0xFF) ++#define FLASHWORD(a) (*(__u16*)((u32)(a) ^ 2)) + #else + #define BYTE0(h) (((h) >> 8) & 0xFF) + #define BYTE1(h) ((h) & 0xFF) ++#define FLASHWORD(a) (*(__u16*)(a)) + #endif + +-#define FLASHWORD(a) (*(__u16*)(a)) +-#define FLASHVAL(a) FLASHWORD(a) +-#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0) ++#define FLASHVAL(a) cfi16_to_cpu(FLASHWORD(a)) ++#define FLASHSET(a,v) (FLASHWORD(a) = cpu_to_cfi16(v)) + + static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) + { diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch new file mode 100644 index 0000000000..3fa0535abf --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch @@ -0,0 +1,70 @@ +drivers/mtd/redboot.c: recognise a foreign byte sex partition table + +The RedBoot boot loader writes flash partition tables containing native +byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an +LE kernel from BE RedBoot) the current MTD driver fails to handle the +partition table and therefore is unable to generate the correct partition +map for the flash. + +The patch recognises that the FIS directory (the partition table) is +byte-reversed by examining the partition table size, which is known to be +one erase block (this is an assumption made elsewhere in redboot.c). If +the size matches the erase block after byte swapping the value then +byte-reversal is assumed, if not no further action is taken. The patched +code is fail safe; should redboot.c be changed to support a partition table +with a modified size field the test will fail and the partition table will +be assumed to have the host byte sex. + +If byte-reversal is detected the patch byte swaps the remainder of the 32 +bit fields in the copy of the table; this copy is then used to set up the +MTD partition map. + +Signed-off-by: John Bowler +Signed-off-by: Andrew Morton +Modified slightly and +Signed-off-by: David Woodhouse + +Index: drivers/mtd/redboot.c +=================================================================== +RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v +retrieving revision 1.18 +retrieving revision 1.19 +diff -u -p -r1.18 -r1.19 +--- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 +@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru + i = numslots; + break; + } +- if (!memcmp(buf[i].name, "FIS directory", 14)) ++ if (!memcmp(buf[i].name, "FIS directory", 14)) { ++ /* This is apparently the FIS directory entry for the ++ * FIS directory itself. The FIS directory size is ++ * one erase block; if the buf[i].size field is ++ * swab32(erasesize) then we know we are looking at ++ * a byte swapped FIS directory - swap all the entries! ++ * (NOTE: this is 'size' not 'data_length'; size is ++ * the full size of the entry.) ++ */ ++ if (swab32(buf[i].size) == master->erasesize) { ++ int j; ++ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { ++ /* The unsigned long fields were written with the ++ * wrong byte sex, name and pad have no byte sex. ++ */ ++ swab32s(&buf[j].flash_base); ++ swab32s(&buf[j].mem_base); ++ swab32s(&buf[j].size); ++ swab32s(&buf[j].entry_point); ++ swab32s(&buf[j].data_length); ++ swab32s(&buf[j].desc_cksum); ++ swab32s(&buf[j].file_cksum); ++ } ++ } + break; ++ } + } + if (i == numslots) { + /* Didn't find it */ + + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch new file mode 100644 index 0000000000..6ac0807f1e --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch @@ -0,0 +1,31 @@ +# The inline caller of these APIs were changed to have +# const vaddr parameters... +--- linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h.orig 2005-09-24 17:06:19.968099976 -0700 ++++ linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h 2005-09-24 17:06:52.542149731 -0700 +@@ -113,7 +113,7 @@ + } + + static inline void +-__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count) ++__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count) + { + while (count--) + writeb(*vaddr++, bus_addr); +@@ -136,7 +136,7 @@ + } + + static inline void +-__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count) ++__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count) + { + while (count--) + writew(*vaddr++, bus_addr); +@@ -154,7 +154,7 @@ + } + + static inline void +-__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count) ++__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count) + { + while (count--) + writel(*vaddr++, bus_addr); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch new file mode 100644 index 0000000000..5813bbb7ac --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/18-ixp4xx-io-h-addr.patch @@ -0,0 +1,287 @@ +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:33:21.757679882 -0700 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:47:02.581331058 -0700 +@@ -80,9 +80,9 @@ __ixp4xx_iounmap(void __iomem *addr) + #define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x) + #define __arch_iounmap(a) __ixp4xx_iounmap(a) + +-#define writeb(p, v) __ixp4xx_writeb(p, v) +-#define writew(p, v) __ixp4xx_writew(p, v) +-#define writel(p, v) __ixp4xx_writel(p, v) ++#define writeb(v, p) __ixp4xx_writeb(v, p) ++#define writew(v, p) __ixp4xx_writew(v, p) ++#define writel(v, p) __ixp4xx_writel(v, p) + + #define writesb(p, v, l) __ixp4xx_writesb(p, v, l) + #define writesw(p, v, l) __ixp4xx_writesw(p, v, l) +@@ -97,8 +97,9 @@ __ixp4xx_iounmap(void __iomem *addr) + #define readsl(p, v, l) __ixp4xx_readsl(p, v, l) + + static inline void +-__ixp4xx_writeb(u8 value, u32 addr) ++__ixp4xx_writeb(u8 value, volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) { +@@ -113,15 +114,16 @@ __ixp4xx_writeb(u8 value, u32 addr) + } + + static inline void +-__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count) ++__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count) + { + while (count--) + writeb(*vaddr++, bus_addr); + } + + static inline void +-__ixp4xx_writew(u16 value, u32 addr) ++__ixp4xx_writew(u16 value, volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) { +@@ -136,15 +138,16 @@ __ixp4xx_writew(u16 value, u32 addr) + } + + static inline void +-__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count) ++__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) + { + while (count--) + writew(*vaddr++, bus_addr); + } + + static inline void +-__ixp4xx_writel(u32 value, u32 addr) ++__ixp4xx_writel(u32 value, volatile void __iomem *p) + { ++ u32 addr = (u32)p; + if (addr >= VMALLOC_START) { + __raw_writel(value, addr); + return; +@@ -154,15 +157,16 @@ __ixp4xx_writel(u32 value, u32 addr) + } + + static inline void +-__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count) ++__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count) + { + while (count--) + writel(*vaddr++, bus_addr); + } + + static inline unsigned char +-__ixp4xx_readb(u32 addr) ++__ixp4xx_readb(const volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) +@@ -177,15 +181,16 @@ __ixp4xx_readb(u32 addr) + } + + static inline void +-__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count) ++__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count) + { + while (count--) + *vaddr++ = readb(bus_addr); + } + + static inline unsigned short +-__ixp4xx_readw(u32 addr) ++__ixp4xx_readw(const volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 n, byte_enables, data; + + if (addr >= VMALLOC_START) +@@ -200,15 +205,16 @@ __ixp4xx_readw(u32 addr) + } + + static inline void +-__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count) ++__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) + { + while (count--) + *vaddr++ = readw(bus_addr); + } + + static inline unsigned long +-__ixp4xx_readl(u32 addr) ++__ixp4xx_readl(const volatile void __iomem *p) + { ++ u32 addr = (u32)p; + u32 data; + + if (addr >= VMALLOC_START) +@@ -221,7 +227,7 @@ __ixp4xx_readl(u32 addr) + } + + static inline void +-__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count) ++__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) + { + while (count--) + *vaddr++ = readl(bus_addr); +@@ -239,7 +245,7 @@ __ixp4xx_readsl(u32 bus_addr, u32 *vaddr + eth_copy_and_sum((s),__mem_pci(c),(l),(b)) + + static inline int +-check_signature(unsigned long bus_addr, const unsigned char *signature, ++check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature, + int length) + { + int retval = 0; +@@ -389,7 +395,7 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u + #define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ + ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) + static inline unsigned int +-__ixp4xx_ioread8(void __iomem *addr) ++__ixp4xx_ioread8(const void __iomem *addr) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -398,12 +404,12 @@ __ixp4xx_ioread8(void __iomem *addr) + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + return (unsigned int)__raw_readb(port); + #else +- return (unsigned int)__ixp4xx_readb(port); ++ return (unsigned int)__ixp4xx_readb(addr); + #endif + } + + static inline void +-__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count) ++__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -412,12 +418,12 @@ __ixp4xx_ioread8_rep(void __iomem *addr, + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsb(addr, vaddr, count); + #else +- __ixp4xx_readsb(port, vaddr, count); ++ __ixp4xx_readsb(addr, vaddr, count); + #endif + } + + static inline unsigned int +-__ixp4xx_ioread16(void __iomem *addr) ++__ixp4xx_ioread16(const void __iomem *addr) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -426,12 +432,12 @@ __ixp4xx_ioread16(void __iomem *addr) + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le16_to_cpu(__raw_readw((u32)port)); + #else +- return (unsigned int)__ixp4xx_readw((u32)port); ++ return (unsigned int)__ixp4xx_readw(addr); + #endif + } + + static inline void +-__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count) ++__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -440,12 +446,12 @@ __ixp4xx_ioread16_rep(void __iomem *addr + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsw(addr, vaddr, count); + #else +- __ixp4xx_readsw(port, vaddr, count); ++ __ixp4xx_readsw(addr, vaddr, count); + #endif + } + + static inline unsigned int +-__ixp4xx_ioread32(void __iomem *addr) ++__ixp4xx_ioread32(const void __iomem *addr) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -454,13 +460,13 @@ __ixp4xx_ioread32(void __iomem *addr) + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + return le32_to_cpu(__raw_readl((u32)port)); + #else +- return (unsigned int)__ixp4xx_readl((u32)port); ++ return (unsigned int)__ixp4xx_readl(addr); + #endif + } + } + + static inline void +-__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count) ++__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count) + { + unsigned long port = (unsigned long __force)addr; + if (__is_io_address(port)) +@@ -469,7 +475,7 @@ __ixp4xx_ioread32_rep(void __iomem *addr + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_readsl(addr, vaddr, count); + #else +- __ixp4xx_readsl(port, vaddr, count); ++ __ixp4xx_readsl(addr, vaddr, count); + #endif + } + +@@ -483,7 +489,7 @@ __ixp4xx_iowrite8(u8 value, void __iomem + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writeb(value, port); + #else +- __ixp4xx_writeb(value, port); ++ __ixp4xx_writeb(value, addr); + #endif + } + +@@ -497,7 +503,7 @@ __ixp4xx_iowrite8_rep(void __iomem *addr + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesb(addr, vaddr, count); + #else +- __ixp4xx_writesb(port, vaddr, count); ++ __ixp4xx_writesb(addr, vaddr, count); + #endif + } + +@@ -511,7 +517,7 @@ __ixp4xx_iowrite16(u16 value, void __iom + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writew(cpu_to_le16(value), addr); + #else +- __ixp4xx_writew(value, port); ++ __ixp4xx_writew(value, addr); + #endif + } + +@@ -525,7 +531,7 @@ __ixp4xx_iowrite16_rep(void __iomem *add + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesw(addr, vaddr, count); + #else +- __ixp4xx_writesw(port, vaddr, count); ++ __ixp4xx_writesw(addr, vaddr, count); + #endif + } + +@@ -539,7 +545,7 @@ __ixp4xx_iowrite32(u32 value, void __iom + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writel(cpu_to_le32(value), port); + #else +- __ixp4xx_writel(value, port); ++ __ixp4xx_writel(value, addr); + #endif + } + +@@ -553,7 +559,7 @@ __ixp4xx_iowrite32_rep(void __iomem *add + #ifndef CONFIG_IXP4XX_INDIRECT_PCI + __raw_writesl(addr, vaddr, count); + #else +- __ixp4xx_writesl(port, vaddr, count); ++ __ixp4xx_writesl(addr, vaddr, count); + #endif + } + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch new file mode 100644 index 0000000000..4406d17857 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/19-jffs2-force-be.patch @@ -0,0 +1,13 @@ +--- linux-2.6.14.1/fs/jffs2/nodelist.h.orig 2005-11-09 23:12:29.641449728 -0800 ++++ linux-2.6.14.1/fs/jffs2/nodelist.h 2005-11-09 23:13:19.228570049 -0800 +@@ -44,7 +44,9 @@ + #define D2(x) + #endif + +-#define JFFS2_NATIVE_ENDIAN ++#undef JFFS2_NATIVE_ENDIAN ++#define JFFS2_BIG_ENDIAN 1 ++#undef JFFS2_LITTLE_ENDIAN + + /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from + whatever OS we're actually running on here too. */ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch new file mode 100644 index 0000000000..3d4a03f616 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/20-timer.patch @@ -0,0 +1,285 @@ +--- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000 +@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void) + * IXP4xx timer tick + * We use OS timer1 on the CPU for the timer tick and the timestamp + * counter as a source of real clock ticks to account for missed jiffies. ++ * ++ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second, ++ * this is significantly greater than the actual number on any ixp4xx ++ * board. Neither this nor 'LATCH' are required by this code because ++ * the only requirement is to generate HZ timer_tick calls per second. + *************************************************************************/ ++#if TICK_NSEC * HZ != 1000000000 ++ /* This will cause the jiffies to drift unnecessarily. */ ++# error CLOCK_TICK_RATE should be a multiple of HZ for this code ++#endif ++ ++/* These are the control registers for the interrupt handler, they must ++ * only be read and written by the interrupt handler and by the init ++ * method (which sets them to 0). ++ */ ++static volatile u32 last_timer_time; ++static volatile int accumulated_error; ++ ++/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset ++ * this from the board level code if required. The following variables ++ * must be *written* only by set_board_tick_rate ++ */ ++static u32 board_tick_rate; ++static u32 board_tick_per_1000; /* board_tick_rate/1000 */ ++static u32 timer_count; ++ ++/* The following symbol may be written to change the current tick rate, ++ * it is read by the interrupt handler and used to reload the timer. ++ * The 'real' value (the one in use) is 'board_tick_rate' above. ++ * NOTE: this can be tweaked to match the actual crystal on a particular ++ * machine. ++ */ ++volatile u32 ixp4xx_board_tick_rate = 66666600; ++EXPORT_SYMBOL(ixp4xx_board_tick_rate); ++ ++/* The set API may run asynchronously in the presence of interrupts, ++ * everything it does it is both atomic and complete (notice that it ++ * doesn't change any of the 'volatile' values). The mathematics in ++ * here require the following values. Changing the board tick rate ++ * implies an unknown error in the current timestamp tick count. ++ */ ++#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1 ++# error unexpected value for timer reload mask ++#endif ++static void set_board_tick_rate(u32 rate) { ++ u32 reload; ++ ++ /* Store the two effectively informational rate values, the ++ * error calculation is (rate - count*HZ) (above), and rate ++ * is changed first, this can cause a temporary error which ++ * will be corrected on the next interrupt. ++ */ ++ board_tick_rate = rate; ++ board_tick_per_1000 = (rate+500)/1000; ++ ++ /* Calculate the correct value to load into the timer countdown ++ * register, the low two bits must be b01 (to enable the timer). ++ * Select the top bits to be as close to the desired value as ++ * possible. ++ * ++ * First find the best value, regardless of the low two bits - ++ * this is the value used in the interrupt calculation even though ++ * it cannot necessarily be set into the register. ++ */ ++ timer_count = (rate + (HZ/2))/HZ; ++ ++ /* Now the timer_ticks are being generated at this rate, calculate ++ * an appropriate value for the register. This stores a 30 bit ++ * value which gives a period of 4*x+1, we want: ++ * ++ * 4*x+1 = board_tick_rate/HZ ++ * ++ * This needs to be rounded to the closest 4*HZ value: ++ * ++ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ ++ * x = (board_tick_rate+HZ) / (4*HZ); ++ */ ++ reload = (board_tick_rate + HZ) / HZ; ++ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ *IXP4XX_OSRT1 = reload; + +-static unsigned volatile last_jiffy_time; ++ /* If the clock is drifing, look in syslog: */ ++ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload); ++} + +-#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++/* This returns the time in timer ticks since the 'last_timer_time' ++ * recorded above. Use this to avoid arithmetic errors because of ++ * the overflow when the timer wraps. ++ */ ++static inline u32 ixp4xx_timer_delta(void) ++{ ++ return *IXP4XX_OSTS - last_timer_time; ++} + + /* IRQs are disabled before entering here from do_gettimeofday() */ + static unsigned long ixp4xx_gettimeoffset(void) + { +- u32 elapsed; +- +- elapsed = *IXP4XX_OSTS - last_jiffy_time; ++ /* Return the offset of the current time from the last time ++ * timer tick in microseconds. This is only used for the ++ * gettimeofday call. ++ * ++ * The result of this API is at most about 20000 (for a 50Hz ++ * HZ - 20000 uS/tick), the input delta is at most about ++ * 1.3M - 21 bits. ++ */ ++ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */ ++ /* return delta * 1000000 / board_tick_rate; */ ++ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000; ++} + +- return elapsed / CLOCK_TICKS_PER_USEC; ++/* This is the correct adjustment to the counter to compensate for an ++ * error iff timer_count-1 <= exact_count <= timer_count+1 ++ */ ++static inline int adjustment(int error) { ++ if (error >= HZ) ++ return 1; ++ else if (error <= -HZ) ++ return -1; ++ return 0; + } + + static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) + { ++ u32 rate; ++ u32 count; ++ int error; ++ + write_seqlock(&xtime_lock); + + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + ++ /* If the board tick rate has been changed update the cached ++ * value. ++ */ ++ if (ixp4xx_board_tick_rate != board_tick_rate) { ++ set_board_tick_rate(ixp4xx_board_tick_rate); ++ accumulated_error = 0; ++ } ++ + /* + * Catch up with the real idea of time ++ * ++ * board_tick_rate: actual ixp4xx ticks/second, read-only ++ * accumulated_error: aggregate error/tick * HZ, read/write ++ * timer_count: best ixp4xx ticks per timer_tick, read-only + */ +- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) { ++ rate = board_tick_rate; ++ error = accumulated_error; ++ count = timer_count; ++ do { ++ u32 adjusted_count = count + adjustment(error); ++ if (ixp4xx_timer_delta() < adjusted_count) ++ break; + timer_tick(regs); +- last_jiffy_time += LATCH; +- } ++ last_timer_time += adjusted_count; ++ error += rate - adjusted_count*HZ; ++ } while (1); ++ accumulated_error = error; + + write_sequnlock(&xtime_lock); + +@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq + .handler = ixp4xx_timer_interrupt, + }; + ++u32 ixp4xx_get_board_tick_rate(void) { ++ return board_tick_rate; ++} ++ ++EXPORT_SYMBOL(ixp4xx_get_board_tick_rate); ++ ++void ixp4xx_set_board_tick_rate(u32 rate) { ++ ixp4xx_board_tick_rate = rate; ++} ++ ++EXPORT_SYMBOL(ixp4xx_set_board_tick_rate); ++ + static void __init ixp4xx_timer_init(void) + { + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + + /* Setup the Timer counter value */ +- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ set_board_tick_rate(ixp4xx_board_tick_rate); + + /* Reset time-stamp counter */ + *IXP4XX_OSTS = 0; +- last_jiffy_time = 0; ++ last_timer_time = 0; ++ accumulated_error = 0; + + /* Connect the interrupt handler and enable the interrupt */ + setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); +@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void) + ARRAY_SIZE(ixp46x_devices)); + } + } +- +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -119,6 +119,11 @@ static void nslu2_power_off(void) + + static void __init nslu2_init(void) + { ++ /* The NSLU2 has a 33MHz crystal on board - 1.01% different ++ * from the typical value. ++ */ ++ ixp4xx_set_board_tick_rate(66000000); ++ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; +--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 +@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input + } + + if (value > 20 && value < 32767) +- count = (NSLU2_FREQ / (value*4)) - 1; ++ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1; + + spin_lock_irqsave(&beep_lock, flags); + +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 +@@ -38,11 +38,6 @@ + #define NSLU2_PCI_INTD_PIN 8 + + +-/* NSLU2 Timer */ +-#define NSLU2_FREQ 66000000 +-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) +- + /* GPIO */ + + #define NSLU2_GPIO0 0 +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 +@@ -6,10 +6,23 @@ + #include + + /* +- * We use IXP425 General purpose timer for our timer needs, it runs at +- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the +- * timer register ignores the bottom 2 bits of the LATCH value. ++ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and ++ * is the number of internal counts per timer interrupt. Thus ++ * CLOCK_TICK_RATE is LATCH*HZ. ++ * ++ * The actual values of these numbers do not matter, because they ++ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed ++ * point number), so the value here gives a LATCH of 1 and pretty ++ * much guarantees to flush out any off-by-one errors. ++ * ++ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of ++ * HZ, this is checked in the ixp4xx/common.c code. + */ +-#define FREQ 66666666 +-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) ++#define CLOCK_TICK_RATE HZ + ++/* The following allow the exact board tick rate to be set and ++ * discovered. The value should be exactly twice the frequency ++ * (in Hz) of the onboard crystal. ++ */ ++extern u32 ixp4xx_get_board_tick_rate(void); ++extern void ixp4xx_set_board_tick_rate(u32 new_rate); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch new file mode 100644 index 0000000000..3ae5178cff --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/28-spinlock-up.patch @@ -0,0 +1,32 @@ +--- linux-2.6.14-rc5/include/linux/spinlock_up.h 2005-10-26 08:37:20.164248408 -0700 ++++ patched/include/linux/spinlock_up.h 2005-10-26 12:15:13.458898975 -0700 +@@ -47,6 +47,14 @@ static inline void __raw_spin_unlock(raw + lock->slock = 1; + } + ++#else /* DEBUG_SPINLOCK */ ++#define __raw_spin_is_locked(lock) ((void)(lock), 0) ++/* for sched.c and kernel_lock.c: */ ++# define __raw_spin_lock(lock) do { (void)(lock); } while (0) ++# define __raw_spin_unlock(lock) do { (void)(lock); } while (0) ++# define __raw_spin_trylock(lock) ({ (void)(lock); 1; }) ++#endif /* DEBUG_SPINLOCK */ ++ + /* + * Read-write spinlocks. No debug version. + */ +@@ -57,14 +65,6 @@ static inline void __raw_spin_unlock(raw + #define __raw_read_unlock(lock) do { (void)(lock); } while (0) + #define __raw_write_unlock(lock) do { (void)(lock); } while (0) + +-#else /* DEBUG_SPINLOCK */ +-#define __raw_spin_is_locked(lock) ((void)(lock), 0) +-/* for sched.c and kernel_lock.c: */ +-# define __raw_spin_lock(lock) do { (void)(lock); } while (0) +-# define __raw_spin_unlock(lock) do { (void)(lock); } while (0) +-# define __raw_spin_trylock(lock) ({ (void)(lock); 1; }) +-#endif /* DEBUG_SPINLOCK */ +- + #define __raw_read_can_lock(lock) (((void)(lock), 1)) + #define __raw_write_can_lock(lock) (((void)(lock), 1)) + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch new file mode 100644 index 0000000000..93e070518c --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/29-ipv4-route-c-spinlock.patch @@ -0,0 +1,11 @@ +--- linux-2.6.14-rc5/net/ipv4/route.c 2005-10-26 08:37:20.752285410 -0700 ++++ patched/net/ipv4/route.c 2005-10-26 12:17:00.761651111 -0700 +@@ -231,7 +231,7 @@ static spinlock_t *rt_hash_locks; + spin_lock_init(&rt_hash_locks[i]); \ + } + #else +-# define rt_hash_lock_addr(slot) NULL ++# define rt_hash_lock_addr(slot) ((spinlock_t*)NULL) + # define rt_hash_lock_init() + #endif + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch new file mode 100644 index 0000000000..1e775ba8b8 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/30-i2c-x1205.patch @@ -0,0 +1,714 @@ +diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Kconfig test9/drivers/i2c/chips/Kconfig +--- linux-2.6.14-rc3/drivers/i2c/chips/Kconfig 2005-10-01 13:46:50.000000000 +0200 ++++ test9/drivers/i2c/chips/Kconfig 2005-10-03 16:10:22.000000000 +0200 +@@ -126,4 +126,13 @@ + This driver can also be built as a module. If so, the module + will be called max6875. + ++config SENSORS_X1205 ++ tristate "Xicor X1205 RTC chip" ++ depends on I2C ++ help ++ If you say yes here you get support for the Xicor X1205 RTC chip. ++ ++ This driver can also be built as a module. If so, the module ++ will be called x1205 ++ + endmenu +diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Makefile test9/drivers/i2c/chips/Makefile +--- linux-2.6.14-rc3/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200 ++++ test9/drivers/i2c/chips/Makefile 2005-10-01 15:30:06.000000000 +0200 +@@ -13,6 +13,7 @@ + obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + obj-$(CONFIG_TPS65010) += tps65010.o ++obj-$(CONFIG_SENSORS_X1205) += x1205.o + + ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) + EXTRA_CFLAGS += -DDEBUG +diff -urN linux-2.6.14-rc3/drivers/i2c/chips/x1205.c test9/drivers/i2c/chips/x1205.c +--- linux-2.6.14-rc3/drivers/i2c/chips/x1205.c 1970-01-01 01:00:00.000000000 +0100 ++++ test9/drivers/i2c/chips/x1205.c 2005-10-03 16:02:57.000000000 +0200 +@@ -0,0 +1,612 @@ ++/* ++ * linux/drivers/i2c/chips/x1205.c ++ * ++ * x1205.c - An 12c driver for the Xicor X1205 RTC ++ * Copyright 2004 Karen Spearel ++ * Copyright 2005 Alessandro Zummo ++ * ++ * please send all reports to: ++ * kas11 at tampabay dot rr dot com ++ * a dot zummo at towertech dot it ++ * ++ * based on the other drivers in this same directory. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define EPOCH_1900 1900 ++#define EPOCH_1970 1970 ++ ++#define DRIVER_VERSION "0.9.6" ++#define DRIVER_NAME (x1205_driver.name) ++ ++ ++/* Addresses to scan */ ++static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END }; ++ ++/* Insmod parameters */ ++I2C_CLIENT_INSMOD; ++I2C_CLIENT_MODULE_PARM(hctosys, ++ "Set the system time from the hardware clock upon initialization"); ++ ++/* Prototypes */ ++ ++static int x1205_attach(struct i2c_adapter *adapter); ++static int x1205_detach(struct i2c_client *client); ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); ++static int x1205_validate_client(struct i2c_client *client); ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base); ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base); ++static int x1205_validate_tm(struct rtc_time *tm); ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); ++static int x1205_hctosys(struct i2c_client *client); ++ ++ ++static struct i2c_driver x1205_driver = { ++ .owner = THIS_MODULE, ++ .name = "x1205", ++ .flags = I2C_DF_NOTIFY, ++ .attach_adapter = &x1205_attach, ++ .detach_client = &x1205_detach, ++/* .command = &x1205_command,*/ ++}; ++ ++struct x1205_data { ++ struct i2c_client client; ++ struct list_head list; ++ unsigned int epoch; ++}; ++ ++ ++static const unsigned char days_in_mo[] = ++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; ++ ++static LIST_HEAD(x1205_clients); ++ ++/* Workaround until the I2C subsytem will allow to send ++ * commands to a specific client. This function will send the command ++ * to the first client. ++ */ ++ ++int x1205_do_command(unsigned int cmd, void *arg) ++{ ++ struct list_head *walk; ++ struct list_head *tmp; ++ struct x1205_data *data; ++ ++ list_for_each_safe(walk, tmp, &x1205_clients) { ++ data = list_entry(walk, struct x1205_data, list); ++ return x1205_command(&data->client, cmd, arg); ++ } ++ ++ return -ENODEV; ++} ++ ++ ++/* ++ * in the routines that deal directly with the x1205 hardware, we use ++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch ++ * Epoch is inited as 2000. Time is set to UT ++ */ ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ u8 reg_base) ++{ ++ static unsigned char dt_addr[] = { 0, }; ++ static unsigned char sr_addr[] = { 0, }; ++ ++ unsigned char buf[8], sr; ++ ++ struct i2c_msg msgs[] = { ++ { client->addr, 0, 2, sr_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &sr }, ++ { client->addr, 0, 2, dt_addr }, /* random read */ ++ { client->addr, I2C_M_RD, 8, buf }, ++ }; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); ++ ++ dt_addr[1] = reg_base; ++ sr_addr[1] = X1205_REG_SR; ++ ++ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) == ++ ARRAY_SIZE(msgs)) { ++ /* did we read the correct number of messages? */ ++ ++ /* check for battery failure */ ++ if (sr & X1205_SR_RTCF) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Clock had a power failure, you must set the date.\n", ++ DRIVER_NAME); ++ ++ return -EINVAL; ++ } ++ ++ dev_dbg(&client->dev, ++ "%s: raw read data - sec-%02x min-%02x hr-%02x" ++ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", ++ __FUNCTION__, ++ buf[0], buf[1], buf[2], buf[3], ++ buf[4], buf[5], buf[6], buf[7]); ++ ++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); ++ tm->tm_min = BCD2BIN(buf[CCR_MIN]); ++ buf[CCR_HOUR] &= ~X1205_HR_MIL; ++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */ ++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); ++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); ++ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; ++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900; ++ tm->tm_wday = buf[CCR_WDAY]; ++ ++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ } else { ++ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++ ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base) ++{ ++ int i, err, xfer; ++ ++ static unsigned char wel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL }; ++ ++ ++ static unsigned char rwel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL | X1205_SR_RWEL }; ++ ++ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; ++ ++ static unsigned char data[3] = { 0, }; ++ static unsigned char buf[8]; ++ ++ struct x1205_data *xdata = i2c_get_clientdata(client); ++ ++ if ((err = x1205_validate_tm(tm)) < 0) ++ return err; ++ ++ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ ++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN] = BIN2BCD(tm->tm_min); ++ ++ /* Set 24HR format */ ++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; ++ ++ if (datetoo == X1205_DATETOO) { ++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); ++ ++ /* month, 0 - 11 */ ++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */ ++ ++ /* year, since 1900 */ ++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch)); ++ buf[CCR_WDAY] = tm->tm_wday & 7; ++ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100); ++ } ++ ++ xfer = i2c_master_send(client, wel, 3); ++ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ xfer = i2c_master_send(client, rwel, 3); ++ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ for (i = 0; i < 8; i++) { ++ data[1] = i + reg_base; ++ data[2] = buf[i]; ++ xfer = i2c_master_send(client, data, 3); ++ ++ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n", ++ __FUNCTION__, ++ xfer, data[1], data[2]); ++ ++ if (xfer != 3) ++ return -EIO; ++ }; ++ ++ xfer = i2c_master_send(client, diswe, 3); ++ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ return 0; ++} ++ ++static int x1205_hctosys(struct i2c_client *client) ++{ ++ int err; ++ ++ struct rtc_time tm; ++ struct timespec tv; ++ ++ ++ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); ++ ++ if (err) ++ { ++ dev_info(&client->adapter->dev, ++ "%s: Unable to set the system clock\n", ++ DRIVER_NAME); ++ ++ return err; ++ ++ } ++ ++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether ++ * it stores the most close value or the value with partial seconds ++ * truncated, however it is important for x1205_sync_rtc that it be ++ * defined to store the truncated value. This is because otherwise it ++ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the ++ * sync function, and atomic reads of >32bits on ARM are not possible. ++ * So storing the most close value would slow down the sync API. So ++ * Here we have the truncated value and the best guess is to add 0.5s ++ */ ++ ++ tv.tv_nsec = NSEC_PER_SEC >> 1; ++ ++ /* WARNING: this is not the C library 'mktime' call, it is a built in ++ * inline function from include/linux/time.h. It expects (requires) ++ * the month to be in the range 1-12 ++ */ ++ ++ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, ++ tm.tm_min, tm.tm_sec); ++ ++ do_settimeofday(&tv); ++ ++ dev_info(&client->adapter->dev, ++ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n", ++ DRIVER_NAME, ++ tm.tm_year + EPOCH_1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, tm.tm_min, ++ tm.tm_sec); ++ ++ return 0; ++} ++ ++struct x1205_limit ++{ ++ unsigned char reg; ++ unsigned char mask; ++ unsigned char min; ++ unsigned char max; ++}; ++ ++static int x1205_validate_client(struct i2c_client *client) ++{ ++ int i, xfer; ++ ++ /* Probe array. We will read the register at the specified ++ * address and check if the given bits are zero. ++ */ ++ ++ const unsigned char probe_zero_pattern[] = { ++ ++ X1205_REG_SR, 0x18, ++ X1205_REG_Y2K, 0xC6, ++ X1205_REG_DW, 0xF8, ++ X1205_REG_MO, 0xE0, ++ X1205_REG_DT, 0xC0, ++ X1205_REG_HR, 0x40, ++ X1205_REG_MN, 0x80, ++ X1205_REG_SC, 0x80, ++ X1205_REG_DTR, 0xF8, ++ X1205_REG_ATR, 0xC0, ++ X1205_REG_INT, 0x18, ++ X1205_REG_0, 0xFF, ++ X1205_REG_Y2K1, 0xC6, ++ X1205_REG_DWA1, 0x78, ++ X1205_REG_MOA1, 0x60, ++ X1205_REG_DTA1, 0x40, ++ X1205_REG_HRA1, 0x40, ++ X1205_REG_Y2K0, 0xC6, ++ X1205_REG_DWA0, 0x78, ++ X1205_REG_MOA0, 0x60, ++ X1205_REG_DTA0, 0x40, ++ X1205_REG_HRA0, 0x40, ++ }; ++ ++ const struct x1205_limit probe_limits_pattern[] = { ++ /* register, mask, min, max */ ++ { X1205_REG_Y2K, 0xFF, 19, 20 }, ++ { X1205_REG_DW, 0xFF, 0, 6 }, ++ { X1205_REG_YR, 0xFF, 0, 99 }, ++ { X1205_REG_MO, 0xFF, 0, 12 }, ++ { X1205_REG_DT, 0xFF, 0, 31 }, ++ { X1205_REG_HR, 0x7F, 0, 23 }, ++ { X1205_REG_MN, 0xFF, 0, 59 }, ++ { X1205_REG_SC, 0xFF, 0, 59 }, ++ { X1205_REG_Y2K1, 0xFF, 19, 20 }, ++ { X1205_REG_DWA1, 0x7F, 0, 6 }, ++ { X1205_REG_MOA1, 0x7F, 0, 12 }, ++ { X1205_REG_DTA1, 0x7F, 0, 31 }, ++ { X1205_REG_HRA1, 0x7F, 0, 23 }, ++ { X1205_REG_MNA1, 0x7F, 0, 59 }, ++ { X1205_REG_SCA1, 0x7F, 0, 59 }, ++ { X1205_REG_Y2K0, 0xFF, 19, 20 }, ++ { X1205_REG_DWA0, 0x7F, 0, 6 }, ++ { X1205_REG_MOA0, 0x7F, 0, 12 }, ++ { X1205_REG_DTA0, 0x7F, 0, 31 }, ++ { X1205_REG_HRA0, 0x7F, 0, 23 }, ++ { X1205_REG_MNA0, 0x7F, 0, 59 }, ++ { X1205_REG_SCA0, 0x7F, 0, 59 }, ++ }; ++ ++ /* check that registers have bits a 0 where expected */ ++ ++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) ++ { ++ unsigned char buf; ++ ++ static unsigned char addr[2]; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &buf }, ++ }; ++ ++ addr[0] = 0x00; ++ addr[1] = probe_zero_pattern[i]; ++ ++ xfer = i2c_transfer(client->adapter, msgs, 2); ++ ++ if (xfer != 2) { ++ dev_dbg(&client->adapter->dev, ++ "%s: could not read register %x\n", ++ __FUNCTION__, addr[1]); ++ ++ return -EIO; ++ } ++ ++ if ((buf & probe_zero_pattern[i+1]) != 0) { ++ dev_dbg(&client->adapter->dev, ++ "%s: register %x, zero pattern %d: %x\n", ++ __FUNCTION__, addr[1], i, buf); ++ ++ return -ENODEV; ++ } ++ } ++ ++ /* check limits */ ++ ++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) ++ { ++ unsigned char buf, val; ++ ++ static unsigned char addr[2]; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, /* random read */ ++ { client->addr, I2C_M_RD, 1, &buf }, ++ }; ++ ++ addr[0] = 0x00; ++ addr[1] = probe_limits_pattern[i].reg; ++ ++ xfer = i2c_transfer(client->adapter, msgs, 2); ++ ++ if (xfer != 2) { ++ dev_dbg(&client->adapter->dev, ++ "%s: could not read register %x\n", ++ __FUNCTION__, addr[1]); ++ ++ return -EIO; ++ } ++ ++ val = BCD2BIN(buf & probe_limits_pattern[i].mask); ++ ++ if (val > probe_limits_pattern[i].max || ++ val < probe_limits_pattern[i].min) { ++ dev_dbg(&client->adapter->dev, ++ "%s: register %x, lim pattern %d: %d\n", ++ __FUNCTION__, addr[1], i, val); ++ ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static int x1205_attach(struct i2c_adapter *adapter) ++{ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ return i2c_probe(adapter, &addr_data, x1205_probe); ++} ++ ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) ++{ ++ struct i2c_client *new_client; ++ struct x1205_data *xdata; ++ ++ int err = 0; ++ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ ++ /* Fill our data structure */ ++ ++ memset(xdata, 0, sizeof(struct x1205_data)); ++ ++ xdata->epoch = 2000; ++ ++ ++ /* Prepare i2c_client structure */ ++ ++ new_client = &xdata->client; ++ i2c_set_clientdata(new_client, xdata); ++ new_client->addr = address; ++ new_client->adapter = adapter; ++ new_client->driver = &x1205_driver; ++ new_client->flags = 0; ++ ++ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE); ++ ++ ++ /* Verify the chip is really an X1205 */ ++ ++ if (kind < 0) ++ { ++ if (x1205_validate_client(new_client) < 0) { ++ err = -ENODEV; ++ goto exit_kfree; ++ } ++ } ++ ++ /* Inform the i2c layer */ ++ if ((err = i2c_attach_client(new_client))) ++ goto exit_kfree; ++ ++ list_add(&xdata->list, &x1205_clients); ++ ++ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n", ++ DRIVER_NAME); ++ ++ /* If requested, se the system time */ ++ if (hctosys) ++ x1205_hctosys(new_client); ++ ++ return 0; ++ ++exit_kfree: ++ kfree(xdata); ++ ++exit: ++ return err; ++} ++ ++static int x1205_detach(struct i2c_client *client) ++{ ++ int err; ++ struct x1205_data *data = i2c_get_clientdata(client); ++ ++ dev_dbg(&client->dev, "%s\n", __FUNCTION__); ++ ++ if ((err = i2c_detach_client(client))) ++ return err; ++ ++ list_del(&data->list); ++ kfree(data); ++ return 0; ++} ++ ++/* make sure the rtc_time values are in bounds */ ++static int x1205_validate_tm(struct rtc_time *tm) ++{ ++ tm->tm_year += 1900; ++ ++ if (tm->tm_year < EPOCH_1970) ++ return -EINVAL; ++ ++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) ++ return -EINVAL; ++ ++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && ++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) ++ return -EINVAL; ++ ++ if ((tm->tm_year -= EPOCH_1900) > 255) ++ return -EINVAL; ++ ++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) ++{ ++ if (client == NULL || tm == NULL) ++ return -EINVAL; ++ ++ if (!capable(CAP_SYS_TIME)) ++ return -EACCES; ++ ++ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); ++ ++ switch (cmd) { ++ case X1205_CMD_GETDATETIME: ++ return x1205_get_datetime(client, tm, X1205_CCR_BASE); ++ ++ case X1205_CMD_SETTIME: ++ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE); ++ ++ case X1205_CMD_SETDATETIME: ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE); ++ ++ case X1205_CMD_GETALARM: ++ return x1205_get_datetime(client, tm, X1205_ALM0_BASE); ++ ++ case X1205_CMD_SETALARM: ++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE); ++ ++ default: ++ return -EINVAL; ++ } ++} ++ ++ ++static int __init x1205_init(void) ++{ ++ return i2c_add_driver(&x1205_driver); ++} ++ ++static void __exit x1205_exit(void) ++{ ++ i2c_del_driver(&x1205_driver); ++} ++ ++MODULE_AUTHOR( ++ "Karen Spearel , " ++ "Alessandro Zummo "); ++MODULE_DESCRIPTION("Xicor X1205 RTC driver"); ++MODULE_LICENSE("GPL"); ++ ++EXPORT_SYMBOL_GPL(x1205_do_command); ++ ++module_init(x1205_init); ++module_exit(x1205_exit); +--- linux-2.6.14-rc3/include/linux/x1205.h 1970-01-01 01:00:00.000000000 +0100 ++++ test9/include/linux/x1205.h 2005-10-03 15:38:21.000000000 +0200 +@@ -0,0 +1,67 @@ ++ ++/* commands */ ++ ++#define X1205_CMD_GETDATETIME 0 ++#define X1205_CMD_SETTIME 1 ++#define X1205_CMD_SETDATETIME 2 ++#define X1205_CMD_GETALARM 3 ++#define X1205_CMD_SETALARM 4 ++ ++/* flags */ ++ ++#define X1205_NODATE 0 ++#define X1205_DATETOO 1 ++ ++/* offsets into read buf - add 2 for write buf */ ++ ++#define CCR_SEC 0 ++#define CCR_MIN 1 ++#define CCR_HOUR 2 ++#define CCR_MDAY 3 ++#define CCR_MONTH 4 ++#define CCR_YEAR 5 ++#define CCR_WDAY 6 ++#define CCR_Y2K 7 ++ ++#define X1205_REG_SR 0x3F /* status register */ ++#define X1205_REG_Y2K 0x37 ++#define X1205_REG_DW 0x36 ++#define X1205_REG_YR 0x35 ++#define X1205_REG_MO 0x34 ++#define X1205_REG_DT 0x33 ++#define X1205_REG_HR 0x32 ++#define X1205_REG_MN 0x31 ++#define X1205_REG_SC 0x30 ++#define X1205_REG_DTR 0x13 ++#define X1205_REG_ATR 0x12 ++#define X1205_REG_INT 0x11 ++#define X1205_REG_0 0x10 ++#define X1205_REG_Y2K1 0x0F ++#define X1205_REG_DWA1 0x0E ++#define X1205_REG_YRA1 0x0D ++#define X1205_REG_MOA1 0x0C ++#define X1205_REG_DTA1 0x0B ++#define X1205_REG_HRA1 0x0A ++#define X1205_REG_MNA1 0x09 ++#define X1205_REG_SCA1 0x08 ++#define X1205_REG_Y2K0 0x07 ++#define X1205_REG_DWA0 0x06 ++#define X1205_REG_YRA0 0x05 ++#define X1205_REG_MOA0 0x04 ++#define X1205_REG_DTA0 0x03 ++#define X1205_REG_HRA0 0x02 ++#define X1205_REG_MNA0 0x01 ++#define X1205_REG_SCA0 0x00 ++ ++#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */ ++#define X1205_CCR_BASE 0x30 /* Base address of CCR */ ++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ ++ ++#define X1205_SR_RTCF 0x01 ++#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */ ++#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */ ++ ++#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */ ++ ++extern int x1205_do_command(unsigned int cmd, void *arg); ++ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch new file mode 100644 index 0000000000..038c71c3b3 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/50-nslu2-arch.patch @@ -0,0 +1,461 @@ +--- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option + + comment "IXP4xx Platforms" + ++# This entry is placed on top because otherwise it would have ++# been shown as a submenu. ++config MACH_NSLU2 ++ bool ++ prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) ++ help ++ Say 'Y' here if you want your kernel to support Linksys's ++ NSLU2 NAS device. For more information on this platform, ++ see http://www.nslu2-linux.org ++ + config ARCH_AVILA + bool "Avila" + help +--- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o + +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,77 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-pci.c ++ * ++ * NSLU2 board-level PCI initialization ++ * ++ * based on ixdp425-pci.c: ++ * Copyright (C) 2002 Intel Corporation. ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Maintainer: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++void __init nslu2_pci_preinit(void) ++{ ++ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); ++ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); ++ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); ++ ++ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); ++ ++ /* INTD is not configured as GPIO is used ++ * for the power input button. ++ */ ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { ++ IRQ_NSLU2_PCI_INTA, ++ IRQ_NSLU2_PCI_INTB, ++ IRQ_NSLU2_PCI_INTC, ++ }; ++ ++ int irq = -1; ++ ++ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && ++ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { ++ irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; ++ } ++ ++ return irq; ++} ++ ++struct hw_pci __initdata nslu2_pci = { ++ .nr_controllers = 1, ++ .preinit = nslu2_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = nslu2_map_irq, ++}; ++ ++int __init nslu2_pci_init(void) /* monkey see, monkey do */ ++{ ++ if (machine_is_nslu2()) ++ pci_common_init(&nslu2_pci); ++ ++ return 0; ++} ++ ++subsys_initcall(nslu2_pci_init); +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,92 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-power.c ++ * ++ * NSLU2 Power/Reset driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++ ++#include ++ ++extern void ctrl_alt_del(void); ++ ++static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* Signal init to do the ctrlaltdel action, this will bypass init if ++ * it hasn't started and do a kernel_restart. ++ */ ++ ctrl_alt_del(); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* This is the paper-clip reset, it shuts the machine down directly. ++ */ ++ machine_power_off(); ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init nslu2_power_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ ++ ++ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); ++ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); ++ ++ gpio_line_isr_clear(NSLU2_RB_GPIO); ++ gpio_line_isr_clear(NSLU2_PB_GPIO); ++ ++ if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, ++ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) { ++ ++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", ++ NSLU2_RB_IRQ); ++ ++ return -EIO; ++ } ++ ++ if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, ++ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) { ++ ++ printk(KERN_DEBUG "Power Button IRQ %d not available\n", ++ NSLU2_PB_IRQ); ++ ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void __exit nslu2_power_exit(void) ++{ ++ free_irq(NSLU2_RB_IRQ, NULL); ++ free_irq(NSLU2_PB_IRQ, NULL); ++} ++ ++module_init(nslu2_power_init); ++module_exit(nslu2_power_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); ++MODULE_LICENSE("GPL"); +--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,134 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-setup.c ++ * ++ * NSLU2 board-setup ++ * ++ * based ixdp425-setup.c: ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Author: Mark Rakes ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * Fixed missing init_time in MACHINE_START kas11 10/22/04 ++ * Changed to conform to new style __init ixdp425 kas11 10/22/04 ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++static struct flash_platform_data nslu2_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource nslu2_flash_resource = { ++ .start = NSLU2_FLASH_BASE, ++ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device nslu2_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev.platform_data = &nslu2_flash_data, ++ .num_resources = 1, ++ .resource = &nslu2_flash_resource, ++}; ++ ++static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { ++ .sda_pin = NSLU2_SDA_PIN, ++ .scl_pin = NSLU2_SCL_PIN, ++}; ++ ++static struct platform_device nslu2_i2c_controller = { ++ .name = "IXP4XX-I2C", ++ .id = 0, ++ .dev.platform_data = &nslu2_i2c_gpio_pins, ++ .num_resources = 0, ++}; ++ ++static struct resource nslu2_uart_resources[] = { ++ { ++ .start = IXP4XX_UART1_BASE_PHYS, ++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct plat_serial8250_port nslu2_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART1_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART1, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { } ++}; ++ ++static struct platform_device nslu2_uart = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .dev.platform_data = nslu2_uart_data, ++ .num_resources = 2, ++ .resource = nslu2_uart_resources, ++}; ++ ++static struct platform_device *nslu2_devices[] __initdata = { ++ &nslu2_i2c_controller, ++ &nslu2_flash, ++ &nslu2_uart, ++}; ++ ++static void nslu2_power_off(void) ++{ ++ /* This causes the box to drop the power and go dead. */ ++ ++ /* enable the pwr cntl gpio */ ++ gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); ++ ++ /* do the deed */ ++ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); ++} ++ ++static void __init nslu2_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ pm_power_off = nslu2_power_off; ++ ++ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); ++} ++ ++MACHINE_START(NSLU2, "Linksys NSLU2") ++ /* Maintainer: www.nslu2-linux.org */ ++ .phys_ram = PHYS_OFFSET, ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, ++ .boot_params = 0x00000100, ++ .map_io = ixp4xx_map_io, ++ .init_irq = ixp4xx_init_irq, ++ .timer = &ixp4xx_timer, ++ .init_machine = nslu2_init, ++MACHINE_END +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000 +@@ -44,5 +44,6 @@ extern unsigned int processor_id; + #include "ixdp425.h" + #include "coyote.h" + #include "prpmc1100.h" ++#include "nslu2.h" + + #endif /* _ASM_ARCH_HARDWARE_H */ +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000 +@@ -93,4 +93,11 @@ + #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 + #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + ++/* ++ * NSLU2 board IRQs ++ */ ++#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 ++#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 ++#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 ++ + #endif +--- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,96 @@ ++/* ++ * include/asm-arm/arch-ixp4xx/nslu2.h ++ * ++ * NSLU2 platform specific definitions ++ * ++ * Author: Mark Rakes ++ * Maintainers: http://www.nslu2-linux.org ++ * ++ * based on ixdp425.h: ++ * Copyright 2004 (c) MontaVista, Software, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#ifndef __ASM_ARCH_HARDWARE_H__ ++#error "Do not include this directly, instead #include " ++#endif ++ ++#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS ++#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE ++ ++#define NSLU2_SDA_PIN 7 ++#define NSLU2_SCL_PIN 6 ++ ++/* ++ * NSLU2 PCI IRQs ++ */ ++#define NSLU2_PCI_MAX_DEV 3 ++#define NSLU2_PCI_IRQ_LINES 3 ++ ++ ++/* PCI controller GPIO to IRQ pin mappings */ ++#define NSLU2_PCI_INTA_PIN 11 ++#define NSLU2_PCI_INTB_PIN 10 ++#define NSLU2_PCI_INTC_PIN 9 ++#define NSLU2_PCI_INTD_PIN 8 ++ ++ ++/* NSLU2 Timer */ ++#define NSLU2_FREQ 66000000 ++#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) ++#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++ ++/* GPIO */ ++ ++#define NSLU2_GPIO0 0 ++#define NSLU2_GPIO1 1 ++#define NSLU2_GPIO2 2 ++#define NSLU2_GPIO3 3 ++#define NSLU2_GPIO4 4 ++#define NSLU2_GPIO5 5 ++#define NSLU2_GPIO6 6 ++#define NSLU2_GPIO7 7 ++#define NSLU2_GPIO8 8 ++#define NSLU2_GPIO9 9 ++#define NSLU2_GPIO10 10 ++#define NSLU2_GPIO11 11 ++#define NSLU2_GPIO12 12 ++#define NSLU2_GPIO13 13 ++#define NSLU2_GPIO14 14 ++#define NSLU2_GPIO15 15 ++ ++/* Buttons */ ++ ++#define NSLU2_PB_GPIO NSLU2_GPIO5 ++#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */ ++#define NSLU2_RB_GPIO NSLU2_GPIO12 ++ ++#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 ++#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 ++ ++#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO) ++#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO) ++#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO) ++ ++/* Buzzer */ ++ ++#define NSLU2_GPIO_BUZZ 4 ++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) ++/* LEDs */ ++ ++#define NSLU2_LED_RED NSLU2_GPIO0 ++#define NSLU2_LED_GRN NSLU2_GPIO1 ++ ++#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED) ++#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN) ++ ++#define NSLU2_LED_DISK1 NSLU2_GPIO2 ++#define NSLU2_LED_DISK2 NSLU2_GPIO3 ++ ++#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2) ++#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3) ++ ++ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch new file mode 100644 index 0000000000..be1f696940 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/55-nslu2-rtc.patch @@ -0,0 +1,125 @@ +--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.171472071 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:52.923187955 -0700 +@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o + +--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:19:43.443489188 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:23:52.923187955 -0700 +@@ -0,0 +1,113 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-rtc.c ++ * ++ * NSLU2 RTC driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on x1205-rtc.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++extern int (*set_rtc)(void); ++ ++static int nslu2_set_rtc(void) ++{ ++ struct rtc_time new_tm, old_tm; ++ unsigned long cur_secs = xtime.tv_sec; ++ ++ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm)) ++ return 0; ++ ++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */ ++ new_tm.tm_sec = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_min = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_hour = cur_secs % 24; ++ ++ /* ++ * avoid writing when we're going to change the day ++ * of the month. We will retry in the next minute. ++ * This basically means that if the RTC must not drift ++ * by more than 1 minute in 11 minutes. ++ */ ++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || ++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) ++ return 1; ++ ++ return x1205_do_command(X1205_CMD_SETTIME, &new_tm); ++} ++ ++static int rtc_read_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time); ++} ++ ++static int rtc_set_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time); ++} ++ ++static int rtc_read_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_GETDATETIME, tm); ++} ++ ++static int rtc_set_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_SETDATETIME, tm); ++} ++ ++static struct rtc_ops rtc_ops = { ++ .owner = THIS_MODULE, ++ .read_time = rtc_read_time, ++ .set_time = rtc_set_time, ++ .read_alarm = rtc_read_alarm, ++ .set_alarm = rtc_set_alarm, ++}; ++ ++static int __init nslu2_rtc_init(void) ++{ ++ int ret; ++ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ printk(KERN_INFO "NSLU2: rtc\n"); ++ ++ if ((ret = register_rtc(&rtc_ops)) != 0) ++ return ret; ++ ++ set_rtc = nslu2_set_rtc; ++ ++ return 0; ++} ++ ++static void __exit nslu2_rtc_exit(void) ++{ ++ set_rtc = NULL; ++ ++ unregister_rtc(&rtc_ops); ++} ++ ++module_init(nslu2_rtc_init); ++module_exit(nslu2_rtc_exit); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch new file mode 100644 index 0000000000..e8a037385b --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/60-nslu2-beeper.patch @@ -0,0 +1,175 @@ +--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Kconfig 2005-08-28 16:41:01.000000000 -0700 ++++ linux-2.6.13/drivers/input/misc/Kconfig 2005-10-26 15:24:01.199708764 -0700 +@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP + tristate "M68k Beeper support" + depends on M68K + ++config INPUT_NSLU2_BEEPER ++ tristate "NSLU2 Beeper support" ++ depends on MACH_NSLU2 ++ help ++ Say Y here if you want the embedded beeper on the LinkSys NSLU2 ++ to be used for bells and whistles. ++ ++ If unsure, say Y. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called nslu2spkr. ++ + config INPUT_UINPUT + tristate "User level driver support" + help +--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Makefile 2005-08-28 16:41:01.000000000 -0700 ++++ linux-2.6.13/drivers/input/misc/Makefile 2005-10-26 15:24:01.199708764 -0700 +@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp + obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o + obj-$(CONFIG_INPUT_UINPUT) += uinput.o + obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o ++obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o +--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/nslu2spkr.c 2005-10-26 15:19:43.711506053 -0700 ++++ linux-2.6.13/drivers/input/misc/nslu2spkr.c 2005-10-26 15:24:01.199708764 -0700 +@@ -0,0 +1,144 @@ ++/* ++ * drivers/input/misc/nslu2spkr.c ++ * ++ * NSLU2 Beeper driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static unsigned int beep_on_startup = 1; ++module_param(beep_on_startup, bool, 0); ++MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup"); ++ ++DEFINE_SPINLOCK(beep_lock); ++ ++static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) ++{ ++ unsigned int count = 0; ++ unsigned long flags; ++ ++ if (type != EV_SND) ++ return -1; ++ ++ switch (code) { ++ case SND_BELL: ++ if (value) value = 1000; ++ case SND_TONE: ++ break; ++ default: ++ return -1; ++ } ++ ++ if (value > 20 && value < 32767) ++ count = (NSLU2_FREQ / (value*4)) - 1; ++ ++ spin_lock_irqsave(&beep_lock, flags); ++ ++ if (count) { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW); ++ ++ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ ++ } else { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH); ++ ++ *IXP4XX_OSRT2 = 0; ++ } ++ ++ spin_unlock_irqrestore(&beep_lock, flags); ++ ++ return 0; ++} ++ ++static struct input_dev nslu2_spkr_dev = { ++ .phys = "ixp420/gpio4", ++ .name = "NSLU2 Beeper", ++ .evbit[0] = BIT(EV_SND), ++ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE), ++ .event = nslu2_spkr_event, ++ .id = { ++ .bustype = BUS_HOST, ++ .vendor = 0x001f, ++ .product = 0x0001, ++ .version = 0x0100 ++ } ++}; ++ ++static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* clear interrupt */ ++ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; ++ ++ /* flip the beeper output */ ++ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM; ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init nslu2_spkr_init(void) ++{ ++ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler, ++ SA_INTERRUPT | SA_TIMER, "NSLU2 beeper", NULL < 0)) { ++ ++ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n", ++ IRQ_IXP4XX_TIMER2); ++ ++ return -EIO; ++ } ++ ++ input_register_device(&nslu2_spkr_dev); ++ ++ /* do a little beep to tell the world we are alive */ ++ if (beep_on_startup) ++ { ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440); ++ msleep(120); ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0); ++ } ++ ++ printk(KERN_INFO "NSLU2: beeper\n"); ++ return 0; ++} ++ ++static void __exit nslu2_spkr_exit(void) ++{ ++ input_unregister_device(&nslu2_spkr_dev); ++ ++ disable_irq(IRQ_IXP4XX_TIMER2); ++ ++ /* turn it off */ ++ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0); ++ ++ free_irq(IRQ_IXP4XX_TIMER2, NULL); ++} ++ ++module_init(nslu2_spkr_init); ++module_exit(nslu2_spkr_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("NSLU2 Beeper driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch new file mode 100644 index 0000000000..d3d200e4c4 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch @@ -0,0 +1,560 @@ +--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.443489188 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:08.652177718 -0700 +@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o + +--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:19:43.979522918 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:24:08.652177718 -0700 +@@ -0,0 +1,548 @@ ++//============================================================================= ++// ++// n2-io.c version 0.1.7 ++// Author: Karen Spearel ++// please report problems/bugs directly to the address above ++// ++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per ++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk ++// ++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, ++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT ++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER ++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. ++// ++//============================================================================= ++// GPIO Function State ++// 0 Red LED Status ++// 1 Green LED Ready = 1 ++// 2 Disk 2 LED On = 0 ++// 3 Disk 1 LED On = 0 ++// 4 Buzzer ++// 5 Power Button Pressed = 1 ++// 8 Power Down Output = 1 powers down NSLU2 ++// 12 Reset Pressed = 0 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++/* Set this to 1 to output lots of debug messages. */ ++#define NSLU2_IO_DEBUG 0 ++ ++#if NSLU2_IO_DEBUG ++#define nslu2_io_debug(args) printk args ++#else ++#define nslu2_io_debug(args) ((void)0) ++#endif ++ ++#define VERSION "0.1.7" ++ ++#define NSLU2BZ_MAJOR 62 //buzzer ++#define NSLU2LM_MAJOR 126 ++ ++ ++#define NSLU2_BEEP_DUR_LONG 2000 ++#define NSLU2_BEEP_DUR_MED 400 ++#define NSLU2_BEEP_DUR_SHORT 100 ++#define NSLU2_BEEP_PITCH_HIGH 250 ++#define NSLU2_BEEP_PITCH_MED 500 ++#define NSLU2_BEEP_PITCH_LOW 1000 ++#define NSLU2_LONG_DELAY 30000 ++ ++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) ++ ++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe ++ ++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible ++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults ++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults ++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 ++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies ++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies ++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever ++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long ++ ++#define NSLU2LM_OFF _IOW('M',32,long) ++#define NSLU2LM_ON _IOW('M',33,long) ++#define NSLU2LM_BLINK _IOW('M',34,long) ++#define NSLU2LM_ALT _IOW('M',35,long) ++#define NSLU2LM_ALL_ON _IO('M',36) ++#define NSLU2LM_ALL_OFF _IO('M',37) ++ ++#define PHYS_LEDS 4 ++#define BLINK_DELAY 25 ++ ++// OR Masks to turn these LEDs ON ++ ++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 ++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 ++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 ++ ++// AND Masks to turn these LEDs OFF ++ ++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 ++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 ++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 ++ ++// AND Masks to turn these LEDs ON ++ ++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ ++// Or Masks to turn these LEDs OFF ++ ++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++ ++// EOR masks for toggling LEDs on/off ++ ++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits ++#define RS_GRN_TGL 0x00000002 ++#define RS_RED_TGL 0x00000001 ++#define DISK1_TGL 0x00000008 ++#define DISK2_TGL 0x00000004 ++ ++// The LED names for switches ++ ++#define LED_RS_RED 0 ++#define LED_RS_GRN 1 ++#define LED_DISK1 2 ++#define LED_DISK2 3 ++#define LED_ALL 4 ++ ++static unsigned long ontime = 50; ++static unsigned long offtime = 450; ++static unsigned long bz_repeatcnt = 10; ++static unsigned long tone = 1000; ++ ++static struct timer_list n2lm_rsg_timer; //rs green ++static struct timer_list n2lm_rsr_timer; //rs red ++static struct timer_list n2lm_d1_timer; //drive 1 ++static struct timer_list n2lm_d2_timer; //drive 2 ++static struct timer_list n2bz_timer; //beeper ++ ++// sysfs class ++static struct class *n2lm_class; ++ ++//================================================================================================== ++// ++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the ++// GPIO output register is xor'd with a mask corresponding to the selected led which simply ++// flips that bit. No record of what any of the other leds is doing is needed. ++// ++//================================================================================================== ++// this blinks rs green or green/yellow if rs red is on ++#ifndef CONFIG_LEDS ++static void n2lm_rsg_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout ++ add_timer(&n2lm_rsg_timer); //reinit timer ++ return; ++} ++ ++// this blinks or alternates rs red green... inited wit green on/red off ++static void n2lm_rsr_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ return; ++} ++// blinks disk 1 ++static void n2lm_d1_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ return; ++} ++// blinks disk 2 ++static void n2lm_d2_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_start(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); ++ ++ switch(led) { ++ case LED_RS_RED: ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ break; ++ ++ case LED_RS_GRN: ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsg_timer); ++ break; ++ ++ case LED_DISK1: ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ break; ++ ++ case LED_DISK2: ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ break; ++ ++ default: ++ break; ++ } ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_stop(unsigned long led) ++{ ++ switch (led) { ++ case LED_RS_RED: ++ del_timer(&n2lm_rsr_timer); ++ break; ++ case LED_RS_GRN: ++ del_timer(&n2lm_rsg_timer); ++ break; ++ case LED_DISK1: ++ del_timer(&n2lm_d1_timer); ++ break; ++ case LED_DISK2: ++ del_timer(&n2lm_d2_timer); ++ break; ++ default: ++ break; ++ } ++ return; ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_timer_stop_all(void) ++{ ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ return; ++} ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledon(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb ++ return; ++ case LED_ALL: //all green ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; ++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); ++ return; ++ } ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledoff(unsigned long led) ++{ ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 ++ return; ++ case LED_ALL: ++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); ++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); ++ } ++} ++ ++//================================================================================================== ++ ++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); ++ ++ if (led < 0 || led >= PHYS_LEDS) ++ return -EINVAL; ++ ++ switch (cmd ) { ++ case NSLU2LM_ON: ++ n2lm_timer_stop(led); ++ n2lm_ledon(led); ++ break; ++ ++ case NSLU2LM_OFF: ++ n2lm_timer_stop(led); ++ n2lm_ledoff(led); ++ break; ++ ++ case NSLU2LM_BLINK: ++ n2lm_ledon(led); ++ if (led == LED_RS_RED) ++ n2lm_rsr_timer.data = RS_RED_TGL; ++ n2lm_timer_start(led); ++ break; ++ ++ case NSLU2LM_ALT: ++ if (led == LED_RS_RED) ++ { ++ n2lm_ledon(LED_RS_GRN); ++ n2lm_ledoff(LED_RS_RED); ++ n2lm_rsr_timer.data = RS_RG_ALT; ++ n2lm_timer_start(LED_RS_RED); ++ break; ++ } else ++ return -EINVAL; ++ ++ case NSLU2LM_ALL_ON: ++ n2lm_timer_stop_all(); ++ n2lm_ledon(LED_ALL); ++ break; ++ ++ case NSLU2LM_ALL_OFF: ++ n2lm_timer_stop_all(); ++ n2lm_ledoff(LED_ALL); ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static struct file_operations n2lm_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2lm_ioctl, ++}; ++#endif ++//================================================================================================== ++// We can't do anything fancy here since the system tick rate is far below that required to ++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until ++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing ++// important should be haprepening. ++//================================================================================================== ++ ++static void n2_buzz(int tone_delay, int duration) ++{ ++ int i; ++ ++ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM; ++ ++ for (i = 1; i < duration; i++) { ++ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM; ++ udelay(tone_delay); ++ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM; ++ udelay(tone_delay); ++ } ++ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM; ++ ++ return; ++} ++//================================================================================================= ++ ++// this handles the buzzer duty cycle ++static void n2bz_handler(unsigned long data) ++{ ++ if (--bz_repeatcnt > 0) { //if just one beep left to do ++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout ++ add_timer(&n2bz_timer); //reinit timer ++ } ++ n2_buzz(tone/2, ontime); ++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); ++ return; ++} ++ ++//================================================================================================== ++ ++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) ++{ ++ switch (cmd) { ++ case NSLU2BZ_BEEP: ++ n2_buzz(tone/2, ontime); ++ break; ++ ++ case NSLU2BZ_BEEP_STOP: ++ del_timer(&n2bz_timer); ++ break; ++ ++ case NSLU2BZ_BEEPS: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ n2bz_handler(0); ++ break; ++ ++ case NSLU2BZ_TONESET: ++ if (param >= 250 && param <= 2000) ++ tone = param; ++ break; ++ ++ case NSLU2BZ_ONTIME: ++ if (param > 4 && param < 201) ++ ontime = param; ++ break; ++ ++ case NSLU2BZ_SILENTTIME: ++ if (param > ontime) //enforce a reasonable duty cycle ++ offtime = param; ++ else ++ offtime = ontime; ++ break; ++ ++ case NSLU2BZ_REPEATCNT: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ break; ++ ++ case NSLU2BZ_COMBINED: ++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 ++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies ++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies ++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 ++ break; ++ ++ default: ++ break; ++ } ++ return 0; ++} ++ ++static struct file_operations n2bz_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2bz_ioctl, ++}; ++ ++static void n2iom_initarch(void) ++{ ++#ifndef CONFIG_LEDS ++ init_timer(&n2lm_rsg_timer); ++ init_timer(&n2lm_rsr_timer); ++ init_timer(&n2lm_d1_timer); ++ init_timer(&n2lm_d2_timer); ++ ++ n2lm_rsr_timer.function = n2lm_rsr_handler; ++ n2lm_rsg_timer.function = n2lm_rsg_handler; ++ n2lm_d2_timer.function = n2lm_d2_handler; ++ n2lm_d1_timer.function = n2lm_d1_handler; ++#endif ++ ++ init_timer(&n2bz_timer); ++ n2bz_timer.function = n2bz_handler; ++ ++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; ++ ++#ifndef CONFIG_LEDS ++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 ++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds ++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; ++ n2lm_ledon(LED_ALL); ++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT); ++ n2lm_ledoff(LED_ALL); ++ ++ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit ++ n2lm_ledon(LED_RS_RED); ++#endif ++ ++ return; ++} ++ ++//================================================================================================== ++ ++static int __init n2iom_init(void) ++{ ++ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION); ++ ++ n2iom_initarch(); ++ ++ n2lm_class = class_create(THIS_MODULE, "nslu2"); ++ ++#ifndef CONFIG_LEDS ++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) { ++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ } ++#endif ++ ++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) { ++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ } ++ ++ return 0; ++} ++ ++//================================================================================================== ++ ++static void __exit n2iom_exit(void) ++{ ++ ++#ifndef CONFIG_LEDS ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ ++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" ); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0)); ++#endif ++ ++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz"); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0)); ++ ++ class_destroy(n2lm_class); ++} ++ ++module_init(n2iom_init); ++module_exit(n2iom_exit); ++ ++MODULE_AUTHOR("Karen Spearel "); ++MODULE_DESCRIPTION("NSLU2 I/O driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch new file mode 100644 index 0000000000..2701c012f3 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/75-nslu2-leds.patch @@ -0,0 +1,267 @@ +--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig 2005-10-26 15:19:34.490925838 -0700 ++++ linux-2.6.13/arch/arm/Kconfig 2005-10-26 15:24:18.628805508 -0700 +@@ -389,7 +389,8 @@ config LEDS + ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ + ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ +- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE ++ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ++ MACH_NSLU2 + help + If you say Y here, the LEDs on your machine will be used + to provide useful information about your current system status. +@@ -403,7 +404,7 @@ config LEDS + + config LEDS_TIMER + bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ +- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2 + depends on LEDS + default y if ARCH_EBSA110 + help +@@ -419,7 +420,8 @@ config LEDS_TIMER + + config LEDS_CPU + bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ +- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \ ++ || MACH_NSLU2 + depends on LEDS + help + If you say Y here, the red LED will be used to give a good real +--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.979522918 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:18.632805759 -0700 +@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote- + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o + obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o + ++leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o ++obj-$(CONFIG_LEDS) += $(leds-y) ++ ++ +--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:19:44.251540035 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:24:18.632805759 -0700 +@@ -0,0 +1,223 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-leds.c ++ * ++ * NSLU2 LEDs driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * and arch/arm/mach-footbridge/netwinder-leds.c ++ * Copyright (C) 1998-1999 Russell King ++ * ++ * Author: Alessandro Zummo ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#define LED_STATE_ENABLED 0x01 ++#define LED_STATE_CLAIMED 0x02 ++#define LED_STATE_IDLE 0x04 ++ ++static unsigned char led_state; ++static unsigned int hw_led_state; ++ ++static const unsigned long idle_seq[4] = { ++ ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM, 0, ++}; ++ ++static const unsigned long busy_seq[4] = { ++ ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0, ++}; ++ ++static unsigned char led_count = 0; ++ ++static DEFINE_SPINLOCK(leds_lock); ++extern spinlock_t gpio_lock; ++ ++static void nslu2_leds_event(led_event_t evt) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&leds_lock, flags); ++ ++ switch (evt) { ++ case led_start: ++ /* Let's rock! Red led on, all others off. Remember ++ * that disk1/disk2 works inverted. On the NSLU2, the ++ * interface starts in a claimed state. XXX ++ */ ++ led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED; ++ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM ++ | NSLU2_LED_RED_BM; ++ break; ++ ++ case led_stop: ++ led_state &= ~LED_STATE_ENABLED; ++ break; ++ ++ case led_claim: ++ /* The user claimed the interface, red and green off */ ++ led_state |= LED_STATE_CLAIMED; ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_release: ++ /* The user released the interface, preserve the last ++ * status of the leds, except red/green. ++ */ ++ led_state &= ~LED_STATE_CLAIMED; ++ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C; ++ break; ++ ++#ifdef CONFIG_LEDS_TIMER ++ case led_timer: ++ /* Pulse green led */ ++ if (!(led_state & LED_STATE_CLAIMED)) ++ { ++ /* clear red and green bits */ ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ ++ /* copy the right sequence in */ ++ if (led_state & LED_STATE_IDLE) ++ hw_led_state |= idle_seq[led_count % 4]; ++ else ++ hw_led_state |= busy_seq[led_count % 4]; ++ ++ led_count++; ++ } ++ break; ++#endif ++ ++#ifdef CONFIG_LEDS_CPU ++ ++ case led_idle_start: ++ led_state |= LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red off */ ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++#endif ++ break; ++ ++ case led_idle_end: ++ led_state &= ~LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red on -> amber on */ ++ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM; ++#endif ++ break; ++#endif ++ ++ case led_halted: ++ if (!(led_state & LED_STATE_CLAIMED)) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ /* leds */ ++ ++ case led_green_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_green_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_amber_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_amber_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_red_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ case led_red_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++ break; ++ ++ default: ++ break; ++ } ++ ++ spin_unlock_irqrestore(&leds_lock, flags); ++ ++ if (led_state & LED_STATE_ENABLED) { ++ spin_lock_irqsave(&gpio_lock, flags); ++ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state; ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ } ++} ++ ++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event, ++ void *ptr) ++{ ++ leds_event(led_green_off); ++ leds_event(led_red_on); ++ ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block nslu2_leds_panic_block = { ++ .notifier_call = nslu2_leds_panic_event, ++}; ++ ++static int __init nslu2_leds_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ printk(KERN_INFO "NSLU2: leds\n"); ++ ++ /* register panic notifier */ ++ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block); ++ ++ /* enable gpio 0-3 */ ++ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT); ++ ++ leds_event = nslu2_leds_event; ++ ++ /* this will also initialize the leds to the ++ * default state. ++ */ ++ ++ leds_event(led_start); ++ ++ return 0; ++} ++ ++module_init(nslu2_leds_init); ++ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch new file mode 100644 index 0000000000..1a37b13a79 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-ixp4xx-pci-le.patch @@ -0,0 +1,11 @@ +--- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c 2005-08-28 16:41:01.000000000 -0700 ++++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c 2005-10-26 15:24:30.337542292 -0700 +@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void) + #ifdef __ARMEB__ + *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; + #else +- *PCI_CSR = PCI_CSR_IC; ++ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; + #endif + + pr_debug("DONE\n"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch new file mode 100644 index 0000000000..ab80672135 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/90-pegasus.patch @@ -0,0 +1,13 @@ +*** linux-2.6.13/drivers/usb/net/pegasus.h.orig Mon Aug 29 01:41:01 2005 +--- linux-2.6.13/drivers/usb/net/pegasus.h Sat Oct 22 20:51:29 2005 +*************** +*** 181,186 **** +--- 181,188 ---- + DEFAULT_GPIO_RESET ) + PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, + DEFAULT_GPIO_RESET | PEGASUS_II ) ++ PEGASUS_DEV( "Philips CPWUE01/00 USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004, ++ DEFAULT_GPIO_RESET | PEGASUS_II ) + PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", + VENDOR_ADMTEK, 0x8511, + DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig new file mode 100644 index 0000000000..83b25213ac --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.14/defconfig @@ -0,0 +1,1556 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14 +# Mon Nov 28 18:53:25 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +CONFIG_MACH_NSLU2=y +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_PHYSDEV=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=m +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MACLIST=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=m + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_RTC=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_X1205=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +CONFIG_VIDEO_BT848=m +# CONFIG_VIDEO_SAA6588 is not set +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_TUNER_3036=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_DPC=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_OVCAMCHIP=m + +# +# Radio Adapters +# +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_VIDEO_VIDEOBUF=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_BUF=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_PWC=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch new file mode 100644 index 0000000000..30d34952d5 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch @@ -0,0 +1,91 @@ +http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3218/1 + +PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error: + +CC [M] sound/core/memory.o +In file included from include/asm/memory.h:27, +from include/asm/io.h:28, +from sound/core/memory.c:24: +include/asm/arch/memory.h: In function `__arch_adjust_zones': +include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use +in this function) + +This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback: + +Russell King wrote: +> The error you see came up on SA1100. The best solution was to move +> the __arch_adjust_zones() function out of line. I suggest ixp4xx +> does the same. + +I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested. + +Signed-off-by: Rod Whitby + +--- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h~ 2005-12-30 05:18:27.000000000 +1030 ++++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h 2005-12-30 05:36:04.000000000 +1030 +@@ -16,31 +16,10 @@ + + #ifndef __ASSEMBLY__ + +-/* +- * Only first 64MB of memory can be accessed via PCI. +- * We use GFP_DMA to allocate safe buffers to do map/unmap. +- * This is really ugly and we need a better way of specifying +- * DMA-capable regions of memory. +- */ +-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, +- unsigned long *zhole_size) +-{ +- unsigned int sz = SZ_64M >> PAGE_SHIFT; +- +- /* +- * Only adjust if > 64M on current system +- */ +- if (node || (zone_size[0] <= sz)) +- return; +- +- zone_size[1] = zone_size[0] - sz; +- zone_size[0] = sz; +- zhole_size[1] = zhole_size[0]; +- zhole_size[0] = 0; +-} ++void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes); + + #define arch_adjust_zones(node, size, holes) \ +- __arch_adjust_zones(node, size, holes) ++ ixp4xx_adjust_zones(node, size, holes) + + #define ISA_DMA_THRESHOLD (SZ_64M - 1) + +--- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c~ 2005-12-30 05:16:03.000000000 +1030 ++++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c 2005-12-30 05:43:55.000000000 +1030 +@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev, + return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M); + } + ++/* ++ * Only first 64MB of memory can be accessed via PCI. ++ * We use GFP_DMA to allocate safe buffers to do map/unmap. ++ * This is really ugly and we need a better way of specifying ++ * DMA-capable regions of memory. ++ */ ++void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, ++ unsigned long *zhole_size) ++{ ++ unsigned int sz = SZ_64M >> PAGE_SHIFT; ++ ++ /* ++ * Only adjust if > 64M on current system ++ */ ++ if (node || (zone_size[0] <= sz)) ++ return; ++ ++ zone_size[1] = zone_size[0] - sz; ++ zone_size[0] = sz; ++ zhole_size[1] = zhole_size[0]; ++ zhole_size[0] = 0; ++} ++ + void __init ixp4xx_pci_preinit(void) + { + unsigned long processor_id; diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch new file mode 100644 index 0000000000..3fa0535abf --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch @@ -0,0 +1,70 @@ +drivers/mtd/redboot.c: recognise a foreign byte sex partition table + +The RedBoot boot loader writes flash partition tables containing native +byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an +LE kernel from BE RedBoot) the current MTD driver fails to handle the +partition table and therefore is unable to generate the correct partition +map for the flash. + +The patch recognises that the FIS directory (the partition table) is +byte-reversed by examining the partition table size, which is known to be +one erase block (this is an assumption made elsewhere in redboot.c). If +the size matches the erase block after byte swapping the value then +byte-reversal is assumed, if not no further action is taken. The patched +code is fail safe; should redboot.c be changed to support a partition table +with a modified size field the test will fail and the partition table will +be assumed to have the host byte sex. + +If byte-reversal is detected the patch byte swaps the remainder of the 32 +bit fields in the copy of the table; this copy is then used to set up the +MTD partition map. + +Signed-off-by: John Bowler +Signed-off-by: Andrew Morton +Modified slightly and +Signed-off-by: David Woodhouse + +Index: drivers/mtd/redboot.c +=================================================================== +RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v +retrieving revision 1.18 +retrieving revision 1.19 +diff -u -p -r1.18 -r1.19 +--- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 +@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru + i = numslots; + break; + } +- if (!memcmp(buf[i].name, "FIS directory", 14)) ++ if (!memcmp(buf[i].name, "FIS directory", 14)) { ++ /* This is apparently the FIS directory entry for the ++ * FIS directory itself. The FIS directory size is ++ * one erase block; if the buf[i].size field is ++ * swab32(erasesize) then we know we are looking at ++ * a byte swapped FIS directory - swap all the entries! ++ * (NOTE: this is 'size' not 'data_length'; size is ++ * the full size of the entry.) ++ */ ++ if (swab32(buf[i].size) == master->erasesize) { ++ int j; ++ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { ++ /* The unsigned long fields were written with the ++ * wrong byte sex, name and pad have no byte sex. ++ */ ++ swab32s(&buf[j].flash_base); ++ swab32s(&buf[j].mem_base); ++ swab32s(&buf[j].size); ++ swab32s(&buf[j].entry_point); ++ swab32s(&buf[j].data_length); ++ swab32s(&buf[j].desc_cksum); ++ swab32s(&buf[j].file_cksum); ++ } ++ } + break; ++ } + } + if (i == numslots) { + /* Didn't find it */ + + diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/15-jffs2-endian-config.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/15-jffs2-endian-config.patch new file mode 100644 index 0000000000..fdebb652a7 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/15-jffs2-endian-config.patch @@ -0,0 +1,68 @@ +--- linux-2.6.15/fs/Kconfig~ 2006-01-03 13:51:10.000000000 +1030 ++++ linux-2.6.15/fs/Kconfig 2006-01-05 01:35:36.000000000 +1030 +@@ -1132,6 +1132,31 @@ config JFFS2_CMODE_SIZE + + endchoice + ++choice ++ prompt "JFFS2 endianness" ++ default JFFS2_NATIVE_ENDIAN ++ depends on JFFS2_FS ++ help ++ You can set here the default endianness of JFFS2 from ++ the available options. Don't touch if unsure. ++ ++config JFFS2_NATIVE_ENDIAN ++ bool "native endian" ++ help ++ Uses a native endian bytestream. ++ ++config JFFS2_BIG_ENDIAN ++ bool "big endian" ++ help ++ Uses a big endian bytestream. ++ ++config JFFS2_LITTLE_ENDIAN ++ bool "little endian" ++ help ++ Uses a little endian bytestream. ++ ++endchoice ++ + config CRAMFS + tristate "Compressed ROM file system support (cramfs)" + select ZLIB_INFLATE +--- linux-2.6.15/fs/jffs2/nodelist.h~ 2006-01-05 01:37:06.000000000 +1030 ++++ linux-2.6.15/fs/jffs2/nodelist.h 2006-01-05 01:37:54.000000000 +1030 +@@ -29,12 +29,10 @@ + #include "os-linux.h" + #endif + +-#define JFFS2_NATIVE_ENDIAN +- + /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from + whatever OS we're actually running on here too. */ + +-#if defined(JFFS2_NATIVE_ENDIAN) ++#if defined(CONFIG_JFFS2_NATIVE_ENDIAN) + #define cpu_to_je16(x) ((jint16_t){x}) + #define cpu_to_je32(x) ((jint32_t){x}) + #define cpu_to_jemode(x) ((jmode_t){os_to_jffs2_mode(x)}) +@@ -42,7 +40,7 @@ + #define je16_to_cpu(x) ((x).v16) + #define je32_to_cpu(x) ((x).v32) + #define jemode_to_cpu(x) (jffs2_to_os_mode((x).m)) +-#elif defined(JFFS2_BIG_ENDIAN) ++#elif defined(CONFIG_JFFS2_BIG_ENDIAN) + #define cpu_to_je16(x) ((jint16_t){cpu_to_be16(x)}) + #define cpu_to_je32(x) ((jint32_t){cpu_to_be32(x)}) + #define cpu_to_jemode(x) ((jmode_t){cpu_to_be32(os_to_jffs2_mode(x))}) +@@ -50,7 +48,7 @@ + #define je16_to_cpu(x) (be16_to_cpu(x.v16)) + #define je32_to_cpu(x) (be32_to_cpu(x.v32)) + #define jemode_to_cpu(x) (be32_to_cpu(jffs2_to_os_mode((x).m))) +-#elif defined(JFFS2_LITTLE_ENDIAN) ++#elif defined(CONFIG_JFFS2_LITTLE_ENDIAN) + #define cpu_to_je16(x) ((jint16_t){cpu_to_le16(x)}) + #define cpu_to_je32(x) ((jint32_t){cpu_to_le32(x)}) + #define cpu_to_jemode(x) ((jmode_t){cpu_to_le32(os_to_jffs2_mode(x))}) diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch new file mode 100644 index 0000000000..feea3f2f8b --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/40-rtc-class.patch @@ -0,0 +1,2719 @@ +--- linux-nslu2.orig/include/linux/rtc.h 2006-01-03 15:31:18.000000000 +0100 ++++ linux-nslu2/include/linux/rtc.h 2006-01-03 15:34:24.000000000 +0100 +@@ -91,8 +91,81 @@ struct rtc_pll_info { + #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */ + #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */ + ++/* interrupt flags */ ++#define RTC_IRQF 0x80 /* any of the following is active */ ++#define RTC_PF 0x40 ++#define RTC_AF 0x20 ++#define RTC_UF 0x10 ++ + #ifdef __KERNEL__ + ++#include ++#include ++#include ++#include ++ ++struct rtc_class_ops { ++ int (*open)(struct device *); ++ void (*release)(struct device *); ++ int (*ioctl)(struct device *, unsigned int, unsigned long); ++ int (*read_time)(struct device *, struct rtc_time *); ++ int (*set_time)(struct device *, struct rtc_time *); ++ int (*read_alarm)(struct device *, struct rtc_wkalrm *); ++ int (*set_alarm)(struct device *, struct rtc_wkalrm *); ++ int (*proc)(struct device *, struct seq_file *); ++ int (*set_mmss)(struct device *, unsigned long secs); ++ int (*irq_set_state)(struct device *, int enabled); ++ int (*irq_set_freq)(struct device *, int freq); ++}; ++ ++#define RTC_DEVICE_NAME_SIZE 20 ++struct rtc_task; ++ ++struct rtc_device ++{ ++ int id; ++ struct module *owner; ++ struct rw_semaphore lock; ++ struct class_device class_dev; ++ struct rtc_class_ops *ops; ++ char name[RTC_DEVICE_NAME_SIZE]; ++ ++ struct cdev char_dev; ++ struct semaphore char_sem; ++ ++ unsigned long irq_data; ++ spinlock_t irq_lock; ++ wait_queue_head_t irq_queue; ++ struct fasync_struct *async_queue; ++ ++ spinlock_t irq_task_lock; ++ struct rtc_task *irq_task; ++ int irq_freq; ++}; ++#define to_rtc_device(d) container_of(d, struct rtc_device, class_dev) ++ ++extern struct rtc_device *rtc_device_register(char *name, ++ struct device *dev, ++ struct rtc_class_ops *ops, ++ struct module *owner); ++extern void rtc_device_unregister(struct rtc_device *rdev); ++extern int rtc_interface_register(struct class_interface *intf); ++ ++ ++extern int rtc_month_days(unsigned int month, unsigned int year); ++extern int rtc_valid_tm(struct rtc_time *tm); ++extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time); ++extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm); ++ ++extern int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm); ++extern int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm); ++extern int rtc_read_alarm(struct class_device *class_dev, ++ struct rtc_wkalrm *alrm); ++extern int rtc_set_alarm(struct class_device *class_dev, ++ struct rtc_wkalrm *alrm); ++extern void rtc_update_irq(struct class_device *class_dev, ++ unsigned long num, unsigned long events); ++ + typedef struct rtc_task { + void (*func)(void *private_data); + void *private_data; +--- linux-nslu2.orig/drivers/Kconfig 2006-01-03 15:31:19.000000000 +0100 ++++ linux-nslu2/drivers/Kconfig 2006-01-04 01:27:31.000000000 +0100 +@@ -66,4 +66,6 @@ source "drivers/infiniband/Kconfig" + + source "drivers/sn/Kconfig" + ++source "drivers/rtc/Kconfig" ++ + endmenu +--- linux-nslu2.orig/drivers/Makefile 2006-01-03 15:33:32.000000000 +0100 ++++ linux-nslu2/drivers/Makefile 2006-01-04 01:27:31.000000000 +0100 +@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_GADGET) += usb/gadget/ + obj-$(CONFIG_GAMEPORT) += input/gameport/ + obj-$(CONFIG_INPUT) += input/ + obj-$(CONFIG_I2O) += message/ ++obj-y += rtc/ + obj-$(CONFIG_I2C) += i2c/ + obj-$(CONFIG_W1) += w1/ + obj-$(CONFIG_HWMON) += hwmon/ +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/class.c 2006-01-03 15:45:19.000000000 +0100 +@@ -0,0 +1,141 @@ ++/* ++ * RTC subsystem, base class ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo ++ * ++ * class skeleton from drivers/hwmon/hwmon.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++*/ ++ ++#include ++#include ++#include ++#include ++ ++static DEFINE_IDR(rtc_idr); ++static DECLARE_MUTEX(idr_lock); ++struct class *rtc_class; ++ ++static void rtc_device_release(struct class_device *class_dev) ++{ ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ down(&idr_lock); ++ idr_remove(&rtc_idr, rtc->id); ++ up(&idr_lock); ++ kfree(rtc); ++} ++ ++/** ++ * rtc_device_register - register w/ RTC class ++ * @dev: the device to register ++ * ++ * rtc_device_unregister() must be called when the class device is no ++ * longer needed. ++ * ++ * Returns the pointer to the new struct class device. ++ */ ++struct rtc_device *rtc_device_register(char *name, struct device *dev, ++ struct rtc_class_ops *ops, ++ struct module *owner) ++{ ++ struct rtc_device *rtc; ++ int id, err; ++ ++ if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ ++ ++ down(&idr_lock); ++ err = idr_get_new(&rtc_idr, NULL, &id); ++ up(&idr_lock); ++ ++ if (err < 0) ++ goto exit; ++ ++ id = id & MAX_ID_MASK; ++ ++ if ((rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL)) == NULL) { ++ err = -ENOMEM; ++ goto exit_idr; ++ } ++ ++ rtc->id = id; ++ rtc->ops = ops; ++ rtc->owner = owner; ++ rtc->class_dev.dev = dev; ++ rtc->class_dev.class = rtc_class; ++ rtc->class_dev.release = rtc_device_release; ++ ++ init_rwsem(&rtc->lock); ++ spin_lock_init(&rtc->irq_lock); ++ spin_lock_init(&rtc->irq_task_lock); ++ ++ strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE); ++ snprintf(rtc->class_dev.class_id, BUS_ID_SIZE, "rtc%d", id); ++ ++ if ((err = class_device_register(&rtc->class_dev))) ++ goto exit_kfree; ++ ++ dev_info(dev, "rtc core: registered %s as %s\n", ++ rtc->name, rtc->class_dev.class_id); ++ ++ return rtc; ++ ++exit_kfree: ++ kfree(rtc); ++ ++exit_idr: ++ idr_remove(&rtc_idr, id); ++ ++exit: ++ return ERR_PTR(err); ++} ++EXPORT_SYMBOL_GPL(rtc_device_register); ++ ++ ++/** ++ * rtc_device_unregister - removes the previously registered RTC class device ++ * ++ * @rtc: the RTC class device to destroy ++ */ ++void rtc_device_unregister(struct rtc_device *rtc) ++{ ++ down_write(&rtc->lock); ++ class_device_unregister(&rtc->class_dev); ++} ++EXPORT_SYMBOL_GPL(rtc_device_unregister); ++ ++int rtc_interface_register(struct class_interface *intf) ++{ ++ intf->class = rtc_class; ++ return class_interface_register(intf); ++} ++EXPORT_SYMBOL_GPL(rtc_interface_register); ++ ++static int __init rtc_init(void) ++{ ++ rtc_class = class_create(THIS_MODULE, "rtc"); ++ if (IS_ERR(rtc_class)) { ++ printk(KERN_ERR "%s: couldn't create class\n", __FILE__); ++ return PTR_ERR(rtc_class); ++ } ++ return 0; ++} ++ ++static void __exit rtc_exit(void) ++{ ++ class_destroy(rtc_class); ++} ++ ++module_init(rtc_init); ++module_exit(rtc_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("RTC class support"); ++MODULE_LICENSE("GPL"); +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/Kconfig 2006-01-04 01:27:21.000000000 +0100 +@@ -0,0 +1,93 @@ ++# ++# RTC class/drivers configuration ++# ++ ++menu "Real Time Clock" ++ ++config RTC_CLASS ++ tristate "RTC class" ++ depends on EXPERIMENTAL ++ default y ++ help ++ Generic RTC class support. If you say yes here, you will ++ be allowed to plug one or more RTCs to your system. You will ++ probably want to enable one of more of the interfaces below. ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-class. ++ ++comment "RTC interfaces" ++ depends on RTC_CLASS ++ ++config RTC_INTF_SYSFS ++ tristate "sysfs" ++ depends on RTC_CLASS && SYSFS ++ default RTC_CLASS ++ help ++ Say yes here if you want to use your RTC using the sysfs ++ interface, /sys/class/rtc/rtcX . ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-sysfs. ++ ++config RTC_INTF_PROC ++ tristate "proc" ++ depends on RTC_CLASS && PROC_FS ++ default RTC_CLASS ++ help ++ Say yes here if you want to use your RTC using the proc ++ interface, /proc/driver/rtc . ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-proc. ++ ++config RTC_INTF_DEV ++ tristate "dev" ++ depends on RTC_CLASS ++ default RTC_CLASS ++ help ++ Say yes here if you want to use your RTC using the dev ++ interface, /dev/rtc . ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-dev. ++ ++comment "RTC drivers" ++ depends on RTC_CLASS ++ ++config RTC_DRV_X1205 ++ tristate "Xicor/Intersil X1205 RTC chip" ++ depends on RTC_CLASS && I2C ++ help ++ If you say yes here you get support for the ++ Xicor/Intersil X1205 RTC chip. ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-x1205. ++ ++config RTC_DRV_DS1672 ++ tristate "Dallas/Maxim DS1672" ++ depends on RTC_CLASS && I2C ++ help ++ If you say yes here you get support for the ++ Dallas/Maxim DS1672 timekeeping chip. ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-ds1672. ++ ++config RTC_DRV_TEST ++ tristate "Test driver/device" ++ depends on RTC_CLASS ++ help ++ If you say yes here you get support for the ++ RTC test driver. It's a software RTC which can be ++ used to test the RTC subsystem APIs. It gets ++ the time from the system clock. ++ You want this driver only if you are doing development ++ on the RTC subsystem. Please read the source code ++ for further details. ++ ++ This driver can also be built as a module. If so, the module ++ will be called rtc-test. ++ ++endmenu +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/Makefile 2006-01-04 01:27:21.000000000 +0100 +@@ -0,0 +1,15 @@ ++# ++# Makefile for RTC class/drivers. ++# ++ ++obj-y += utils.o ++obj-$(CONFIG_RTC_CLASS) += rtc-core.o ++rtc-core-y := class.o interface.o ++obj-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o ++obj-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o ++obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o ++ ++obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o ++obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o ++obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o ++ +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/interface.c 2006-01-03 15:34:24.000000000 +0100 +@@ -0,0 +1,189 @@ ++/* ++ * RTC subsystem, interface functions ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo ++ * ++ * based on arch/arm/common/rtctime.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++*/ ++ ++#include ++ ++extern struct class *rtc_class; ++ ++int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm) ++{ ++ int err = -EINVAL; ++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops; ++ ++ if (ops->read_time) { ++ memset(tm, 0, sizeof(struct rtc_time)); ++ err = ops->read_time(class_dev->dev, tm); ++ } ++ return err; ++} ++EXPORT_SYMBOL(rtc_read_time); ++ ++int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm) ++{ ++ int err; ++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops; ++ ++ err = rtc_valid_tm(tm); ++ if (err == 0 && ops->set_time) ++ err = ops->set_time(class_dev->dev, tm); ++ ++ return err; ++} ++EXPORT_SYMBOL(rtc_set_time); ++ ++int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) ++{ ++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops; ++ int err = -EINVAL; ++ ++ if (ops->read_alarm) { ++ memset(alarm, 0, sizeof(struct rtc_wkalrm)); ++ err = ops->read_alarm(class_dev->dev, alarm); ++ } ++ return err; ++} ++EXPORT_SYMBOL(rtc_read_alarm); ++ ++int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) ++{ ++ int err = -EINVAL; ++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops; ++ ++ if (ops->set_alarm) ++ err = ops->set_alarm(class_dev->dev, alarm); ++ return err; ++} ++EXPORT_SYMBOL(rtc_set_alarm); ++ ++void rtc_update_irq(struct class_device *class_dev, ++ unsigned long num, unsigned long events) ++{ ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ spin_lock(&rtc->irq_lock); ++ rtc->irq_data = (rtc->irq_data + (num << 8)) | events; ++ spin_unlock(&rtc->irq_lock); ++ ++ spin_lock(&rtc->irq_task_lock); ++ if (rtc->irq_task) ++ rtc->irq_task->func(rtc->irq_task->private_data); ++ spin_unlock(&rtc->irq_task_lock); ++ ++ wake_up_interruptible(&rtc->irq_queue); ++ kill_fasync(&rtc->async_queue, SIGIO, POLL_IN); ++} ++EXPORT_SYMBOL(rtc_update_irq); ++ ++struct class_device *rtc_open(char *name) ++{ ++ struct class_device *class_dev = NULL, ++ *class_dev_tmp; ++ ++ down(&rtc_class->sem); ++ list_for_each_entry(class_dev_tmp, &rtc_class->children, node) { ++ if (strncmp(class_dev_tmp->class_id, name, BUS_ID_SIZE) == 0) { ++ class_dev = class_dev_tmp; ++ break; ++ } ++ } ++ up(&rtc_class->sem); ++ ++ return class_dev; ++} ++EXPORT_SYMBOL(rtc_open); ++ ++void rtc_close(struct class_device *class_dev) ++{ ++} ++EXPORT_SYMBOL(rtc_close); ++ ++int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task) ++{ ++ int retval = -EBUSY; ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ if (task == NULL || task->func == NULL) ++ return -EINVAL; ++ ++ spin_lock(&rtc->irq_task_lock); ++ if (rtc->irq_task == NULL) { ++ rtc->irq_task = task; ++ retval = 0; ++ } ++ spin_unlock(&rtc->irq_task_lock); ++ ++ return retval; ++} ++EXPORT_SYMBOL(rtc_irq_register); ++ ++void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task) ++{ ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ spin_lock(&rtc->irq_task_lock); ++ if (rtc->irq_task == task) ++ rtc->irq_task = NULL; ++ spin_unlock(&rtc->irq_task_lock); ++} ++EXPORT_SYMBOL(rtc_irq_unregister); ++ ++int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int enabled) ++{ ++ int err = 0; ++ unsigned long flags; ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ spin_lock_irqsave(&rtc->irq_task_lock, flags); ++ if (rtc->irq_task != task) ++ err = -ENXIO; ++ spin_unlock_irqrestore(&rtc->irq_task_lock, flags); ++ ++ if (err == 0) ++ err = rtc->ops->irq_set_state(class_dev->dev, enabled); ++ ++ return err; ++} ++EXPORT_SYMBOL(rtc_irq_set_state); ++ ++int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int freq) ++{ ++ int err = 0, tmp = 0; ++ unsigned long flags; ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ /* allowed range is 2-8192 */ ++ if (freq < 2 || freq > 8192) ++ return -EINVAL; ++ ++/* if ((freq > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE))) ++ return -EACCES; ++*/ ++ /* check if freq is a power of 2 */ ++ while (freq > (1 << tmp)) ++ tmp++; ++ ++ if (freq != (1 << tmp)) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&rtc->irq_task_lock, flags); ++ if (rtc->irq_task != task) ++ err = -ENXIO; ++ spin_unlock_irqrestore(&rtc->irq_task_lock, flags); ++ ++ if (err == 0) { ++ if ((err = rtc->ops->irq_set_freq(class_dev->dev, freq)) == 0) ++ rtc->irq_freq = freq; ++ } ++ return err; ++ ++} +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/utils.c 2006-01-03 15:34:24.000000000 +0100 +@@ -0,0 +1,97 @@ ++/* ++ * RTC subsystem, utility functions ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo ++ * ++ * based on arch/arm/common/rtctime.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++*/ ++ ++#include ++ ++static const unsigned char rtc_days_in_month[] = { ++ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 ++}; ++ ++#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400) ++#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400)) ++ ++int rtc_month_days(unsigned int month, unsigned int year) ++{ ++ return rtc_days_in_month[month] + (LEAP_YEAR(year) && month == 1); ++} ++EXPORT_SYMBOL(rtc_month_days); ++ ++/* ++ * Convert seconds since 01-01-1970 00:00:00 to Gregorian date. ++ */ ++void rtc_time_to_tm(unsigned long time, struct rtc_time *tm) ++{ ++ int days, month, year; ++ ++ days = time / 86400; ++ time -= days * 86400; ++ ++ tm->tm_wday = (days + 4) % 7; ++ ++ year = 1970 + days / 365; ++ days -= (year - 1970) * 365 ++ + LEAPS_THRU_END_OF(year - 1) ++ - LEAPS_THRU_END_OF(1970 - 1); ++ if (days < 0) { ++ year -= 1; ++ days += 365 + LEAP_YEAR(year); ++ } ++ tm->tm_year = year - 1900; ++ tm->tm_yday = days + 1; ++ ++ for (month = 0; month < 11; month++) { ++ int newdays; ++ ++ newdays = days - rtc_month_days(month, year); ++ if (newdays < 0) ++ break; ++ days = newdays; ++ } ++ tm->tm_mon = month; ++ tm->tm_mday = days + 1; ++ ++ tm->tm_hour = time / 3600; ++ time -= tm->tm_hour * 3600; ++ tm->tm_min = time / 60; ++ tm->tm_sec = time - tm->tm_min * 60; ++} ++EXPORT_SYMBOL(rtc_time_to_tm); ++ ++/* ++ * Does the rtc_time represent a valid date/time? ++ */ ++int rtc_valid_tm(struct rtc_time *tm) ++{ ++ if (tm->tm_year < 70 || ++ tm->tm_mon >= 12 || ++ tm->tm_mday < 1 || ++ tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900) || ++ tm->tm_hour >= 24 || ++ tm->tm_min >= 60 || ++ tm->tm_sec >= 60) ++ return -EINVAL; ++ ++ return 0; ++} ++EXPORT_SYMBOL(rtc_valid_tm); ++ ++/* ++ * Convert Gregorian date to seconds since 01-01-1970 00:00:00. ++ */ ++int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time) ++{ ++ *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday, ++ tm->tm_hour, tm->tm_min, tm->tm_sec); ++ return 0; ++} ++EXPORT_SYMBOL(rtc_tm_to_time); +--- linux-nslu2.orig/arch/arm/Kconfig 2006-01-04 01:27:04.000000000 +0100 ++++ linux-nslu2/arch/arm/Kconfig 2006-01-04 01:27:31.000000000 +0100 +@@ -750,6 +750,8 @@ source "drivers/usb/Kconfig" + + source "drivers/mmc/Kconfig" + ++source "drivers/rtc/Kconfig" ++ + endmenu + + source "fs/Kconfig" +--- linux-nslu2.orig/arch/arm/common/rtctime.c 2006-01-04 01:27:04.000000000 +0100 ++++ linux-nslu2/arch/arm/common/rtctime.c 2006-01-04 01:27:09.000000000 +0100 +@@ -40,89 +40,6 @@ static struct rtc_ops *rtc_ops; + + #define rtc_epoch 1900UL + +-static const unsigned char days_in_month[] = { +- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 +-}; +- +-#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400) +-#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400)) +- +-static int month_days(unsigned int month, unsigned int year) +-{ +- return days_in_month[month] + (LEAP_YEAR(year) && month == 1); +-} +- +-/* +- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date. +- */ +-void rtc_time_to_tm(unsigned long time, struct rtc_time *tm) +-{ +- int days, month, year; +- +- days = time / 86400; +- time -= days * 86400; +- +- tm->tm_wday = (days + 4) % 7; +- +- year = 1970 + days / 365; +- days -= (year - 1970) * 365 +- + LEAPS_THRU_END_OF(year - 1) +- - LEAPS_THRU_END_OF(1970 - 1); +- if (days < 0) { +- year -= 1; +- days += 365 + LEAP_YEAR(year); +- } +- tm->tm_year = year - 1900; +- tm->tm_yday = days + 1; +- +- for (month = 0; month < 11; month++) { +- int newdays; +- +- newdays = days - month_days(month, year); +- if (newdays < 0) +- break; +- days = newdays; +- } +- tm->tm_mon = month; +- tm->tm_mday = days + 1; +- +- tm->tm_hour = time / 3600; +- time -= tm->tm_hour * 3600; +- tm->tm_min = time / 60; +- tm->tm_sec = time - tm->tm_min * 60; +-} +-EXPORT_SYMBOL(rtc_time_to_tm); +- +-/* +- * Does the rtc_time represent a valid date/time? +- */ +-int rtc_valid_tm(struct rtc_time *tm) +-{ +- if (tm->tm_year < 70 || +- tm->tm_mon >= 12 || +- tm->tm_mday < 1 || +- tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) || +- tm->tm_hour >= 24 || +- tm->tm_min >= 60 || +- tm->tm_sec >= 60) +- return -EINVAL; +- +- return 0; +-} +-EXPORT_SYMBOL(rtc_valid_tm); +- +-/* +- * Convert Gregorian date to seconds since 01-01-1970 00:00:00. +- */ +-int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time) +-{ +- *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday, +- tm->tm_hour, tm->tm_min, tm->tm_sec); +- +- return 0; +-} +-EXPORT_SYMBOL(rtc_tm_to_time); +- + /* + * Calculate the next alarm time given the requested alarm time mask + * and the current time. +@@ -141,13 +58,13 @@ void rtc_next_alarm_time(struct rtc_time + next->tm_sec = alrm->tm_sec; + } + +-static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm) ++static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm) + { + memset(tm, 0, sizeof(struct rtc_time)); + return ops->read_time(tm); + } + +-static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm) ++static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm) + { + int ret; + +@@ -158,7 +75,7 @@ static inline int rtc_set_time(struct rt + return ret; + } + +-static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) ++static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) + { + int ret = -EINVAL; + if (ops->read_alarm) { +@@ -168,7 +85,7 @@ static inline int rtc_read_alarm(struct + return ret; + } + +-static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) ++static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) + { + int ret = -EINVAL; + if (ops->set_alarm) +@@ -256,7 +173,7 @@ static int rtc_ioctl(struct inode *inode + + switch (cmd) { + case RTC_ALM_READ: +- ret = rtc_read_alarm(ops, &alrm); ++ ret = rtc_arm_read_alarm(ops, &alrm); + if (ret) + break; + ret = copy_to_user(uarg, &alrm.time, sizeof(tm)); +@@ -278,11 +195,11 @@ static int rtc_ioctl(struct inode *inode + alrm.time.tm_wday = -1; + alrm.time.tm_yday = -1; + alrm.time.tm_isdst = -1; +- ret = rtc_set_alarm(ops, &alrm); ++ ret = rtc_arm_set_alarm(ops, &alrm); + break; + + case RTC_RD_TIME: +- ret = rtc_read_time(ops, &tm); ++ ret = rtc_arm_read_time(ops, &tm); + if (ret) + break; + ret = copy_to_user(uarg, &tm, sizeof(tm)); +@@ -300,7 +217,7 @@ static int rtc_ioctl(struct inode *inode + ret = -EFAULT; + break; + } +- ret = rtc_set_time(ops, &tm); ++ ret = rtc_arm_set_time(ops, &tm); + break; + + case RTC_EPOCH_SET: +@@ -331,11 +248,11 @@ static int rtc_ioctl(struct inode *inode + ret = -EFAULT; + break; + } +- ret = rtc_set_alarm(ops, &alrm); ++ ret = rtc_arm_set_alarm(ops, &alrm); + break; + + case RTC_WKALM_RD: +- ret = rtc_read_alarm(ops, &alrm); ++ ret = rtc_arm_read_alarm(ops, &alrm); + if (ret) + break; + ret = copy_to_user(uarg, &alrm, sizeof(alrm)); +@@ -425,7 +342,7 @@ static int rtc_read_proc(char *page, cha + struct rtc_time tm; + char *p = page; + +- if (rtc_read_time(ops, &tm) == 0) { ++ if (rtc_arm_read_time(ops, &tm) == 0) { + p += sprintf(p, + "rtc_time\t: %02d:%02d:%02d\n" + "rtc_date\t: %04d-%02d-%02d\n" +@@ -435,7 +352,7 @@ static int rtc_read_proc(char *page, cha + rtc_epoch); + } + +- if (rtc_read_alarm(ops, &alrm) == 0) { ++ if (rtc_arm_read_alarm(ops, &alrm) == 0) { + p += sprintf(p, "alrm_time\t: "); + if ((unsigned int)alrm.time.tm_hour <= 24) + p += sprintf(p, "%02d:", alrm.time.tm_hour); +--- linux-nslu2.orig/include/asm-arm/rtc.h 2006-01-04 01:27:04.000000000 +0100 ++++ linux-nslu2/include/asm-arm/rtc.h 2006-01-04 01:27:09.000000000 +0100 +@@ -25,9 +25,6 @@ struct rtc_ops { + int (*proc)(char *buf); + }; + +-void rtc_time_to_tm(unsigned long, struct rtc_time *); +-int rtc_tm_to_time(struct rtc_time *, unsigned long *); +-int rtc_valid_tm(struct rtc_time *); + void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *); + void rtc_update(unsigned long, unsigned long); + int register_rtc(struct rtc_ops *); +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/rtc-sysfs.c 2006-01-04 01:27:12.000000000 +0100 +@@ -0,0 +1,125 @@ ++/* ++ * RTC subsystem, sysfs interface ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++*/ ++ ++#include ++#include ++ ++/* device attributes */ ++ ++static ssize_t rtc_sysfs_show_name(struct class_device *dev, char *buf) ++{ ++ return sprintf(buf, "%s\n", to_rtc_device(dev)->name); ++} ++static CLASS_DEVICE_ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL); ++ ++static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf) ++{ ++ ssize_t retval = 0; ++ struct rtc_device *rtc = to_rtc_device(dev); ++ struct rtc_time tm; ++ ++ if (down_read_trylock(&rtc->lock) == 0) ++ return -ENODEV; ++ ++ if (rtc_read_time(dev, &tm) == 0) { ++ retval = sprintf(buf, "%04d-%02d-%02d\n", ++ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); ++ } ++ ++ up_read(&rtc->lock); ++ return retval; ++} ++static CLASS_DEVICE_ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL); ++ ++static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf) ++{ ++ ssize_t retval = 0; ++ struct rtc_device *rtc = to_rtc_device(dev); ++ struct rtc_time tm; ++ ++ if (down_read_trylock(&rtc->lock) == 0) ++ return -ENODEV; ++ ++ if (rtc_read_time(dev, &tm) == 0) { ++ retval = sprintf(buf, "%02d:%02d:%02d\n", ++ tm.tm_hour, tm.tm_min, tm.tm_sec); ++ } ++ ++ up_read(&rtc->lock); ++ return retval; ++} ++static CLASS_DEVICE_ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL); ++ ++static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf) ++{ ++ ssize_t retval = 0; ++ struct rtc_device *rtc = to_rtc_device(dev); ++ struct rtc_time tm; ++ ++ if (down_read_trylock(&rtc->lock) == 0) ++ return -ENODEV; ++ ++ if (rtc_read_time(dev, &tm) == 0) { ++ unsigned long time; ++ rtc_tm_to_time(&tm, &time); ++ retval = sprintf(buf, "%lu\n", time); ++ } ++ ++ up_read(&rtc->lock); ++ return retval; ++} ++static CLASS_DEVICE_ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL); ++ ++/* insertion/removal hooks */ ++ ++static int __devinit rtc_sysfs_add_device(struct class_device *class_dev, ++ struct class_interface *class_intf) ++{ ++ class_device_create_file(class_dev, &class_device_attr_name); ++ class_device_create_file(class_dev, &class_device_attr_date); ++ class_device_create_file(class_dev, &class_device_attr_time); ++ class_device_create_file(class_dev, &class_device_attr_since_epoch); ++ dev_info(class_dev->dev, "rtc intf: sysfs\n"); ++ return 0; ++} ++ ++static void rtc_sysfs_remove_device(struct class_device *class_dev, ++ struct class_interface *class_intf) ++{ ++ class_device_remove_file(class_dev, &class_device_attr_name); ++ class_device_remove_file(class_dev, &class_device_attr_date); ++ class_device_remove_file(class_dev, &class_device_attr_time); ++ class_device_remove_file(class_dev, &class_device_attr_since_epoch); ++} ++ ++/* interface registration */ ++ ++struct class_interface rtc_sysfs_interface = { ++ .add = &rtc_sysfs_add_device, ++ .remove = &rtc_sysfs_remove_device, ++}; ++ ++static int __init rtc_sysfs_init(void) ++{ ++ return rtc_interface_register(&rtc_sysfs_interface); ++} ++ ++static void __exit rtc_sysfs_exit(void) ++{ ++ class_interface_unregister(&rtc_sysfs_interface); ++} ++ ++module_init(rtc_sysfs_init); ++module_exit(rtc_sysfs_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("RTC class sysfs interface"); ++MODULE_LICENSE("GPL"); +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/rtc-proc.c 2006-01-04 01:27:14.000000000 +0100 +@@ -0,0 +1,158 @@ ++/* ++ * RTC subsystem, proc interface ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo ++ * ++ * based on arch/arm/common/rtctime.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++*/ ++ ++#include ++#include ++#include ++#include ++ ++static struct class_device *rtc_dev = NULL; ++static DECLARE_MUTEX(rtc_sem); ++ ++static int rtc_proc_show(struct seq_file *seq, void *offset) ++{ ++ struct class_device *class_dev = seq->private; ++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops; ++ struct rtc_wkalrm alrm; ++ struct rtc_time tm; ++ ++ if (rtc_read_time(class_dev, &tm) == 0) { ++ seq_printf(seq, ++ "rtc_time\t: %02d:%02d:%02d\n" ++ "rtc_date\t: %04d-%02d-%02d\n", ++ tm.tm_hour, tm.tm_min, tm.tm_sec, ++ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); ++ } ++ ++ if (rtc_read_alarm(class_dev, &alrm) == 0) { ++ seq_printf(seq, "alrm_time\t: "); ++ if ((unsigned int)alrm.time.tm_hour <= 24) ++ seq_printf(seq, "%02d:", alrm.time.tm_hour); ++ else ++ seq_printf(seq, "**:"); ++ if ((unsigned int)alrm.time.tm_min <= 59) ++ seq_printf(seq, "%02d:", alrm.time.tm_min); ++ else ++ seq_printf(seq, "**:"); ++ if ((unsigned int)alrm.time.tm_sec <= 59) ++ seq_printf(seq, "%02d\n", alrm.time.tm_sec); ++ else ++ seq_printf(seq, "**\n"); ++ ++ seq_printf(seq, "alrm_date\t: "); ++ if ((unsigned int)alrm.time.tm_year <= 200) ++ seq_printf(seq, "%04d-", alrm.time.tm_year + 1900); ++ else ++ seq_printf(seq, "****-"); ++ if ((unsigned int)alrm.time.tm_mon <= 11) ++ seq_printf(seq, "%02d-", alrm.time.tm_mon + 1); ++ else ++ seq_printf(seq, "**-"); ++ if ((unsigned int)alrm.time.tm_mday <= 31) ++ seq_printf(seq, "%02d\n", alrm.time.tm_mday); ++ else ++ seq_printf(seq, "**\n"); ++ seq_printf(seq, "alrm_wakeup\t: %s\n", ++ alrm.enabled ? "yes" : "no"); ++ seq_printf(seq, "alrm_pending\t: %s\n", ++ alrm.pending ? "yes" : "no"); ++ } ++ ++ if (ops->proc) ++ ops->proc(class_dev->dev, seq); ++ ++ return 0; ++} ++ ++static int rtc_proc_open(struct inode *inode, struct file *file) ++{ ++ struct class_device *class_dev = PDE(inode)->data; ++ ++ if (!try_module_get(THIS_MODULE)) ++ return -ENODEV; ++ ++ return single_open(file, rtc_proc_show, class_dev); ++} ++ ++static int rtc_proc_release(struct inode *inode, struct file *file) ++{ ++ int res = single_release(inode, file); ++ module_put(THIS_MODULE); ++ return res; ++} ++ ++static struct file_operations rtc_proc_fops = { ++ .open = rtc_proc_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = rtc_proc_release, ++}; ++ ++static int rtc_proc_add_device(struct class_device *class_dev, ++ struct class_interface *class_intf) ++{ ++ down(&rtc_sem); ++ if (rtc_dev == NULL) { ++ struct proc_dir_entry *ent; ++ ++ rtc_dev = class_dev; ++ ++ if ((ent = create_proc_entry("driver/rtc", 0, NULL))) { ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ ent->proc_fops = &rtc_proc_fops; ++ ent->owner = rtc->owner; ++ ent->data = class_dev; ++ ++ dev_info(class_dev->dev, "rtc intf: proc\n"); ++ } ++ else ++ rtc_dev = NULL; ++ } ++ up(&rtc_sem); ++ ++ return 0; ++} ++ ++static void rtc_proc_remove_device(struct class_device *class_dev, ++ struct class_interface *class_intf) ++{ ++ down(&rtc_sem); ++ if (rtc_dev == class_dev) { ++ remove_proc_entry("driver/rtc", NULL); ++ rtc_dev = NULL; ++ } ++ up(&rtc_sem); ++} ++ ++struct class_interface rtc_proc_interface = { ++ .add = &rtc_proc_add_device, ++ .remove = &rtc_proc_remove_device, ++}; ++ ++static int __init rtc_proc_init(void) ++{ ++ return rtc_interface_register(&rtc_proc_interface); ++} ++ ++static void __exit rtc_proc_exit(void) ++{ ++ class_interface_unregister(&rtc_proc_interface); ++} ++ ++module_init(rtc_proc_init); ++module_exit(rtc_proc_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("RTC class proc interface"); ++MODULE_LICENSE("GPL"); +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/rtc-dev.c 2006-01-04 01:27:15.000000000 +0100 +@@ -0,0 +1,372 @@ ++/* ++ * RTC subsystem, dev interface ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo ++ * ++ * based on arch/arm/common/rtctime.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++*/ ++ ++#include ++#include ++ ++static dev_t rtc_devt; ++ ++#define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */ ++ ++static int rtc_dev_open(struct inode *inode, struct file *file) ++{ ++ int err; ++ struct rtc_device *rtc = container_of(inode->i_cdev, ++ struct rtc_device, char_dev); ++ struct rtc_class_ops *ops = rtc->ops; ++ ++ /* We keep the lock as long as the device is in use ++ * and return immediately if busy ++ */ ++ if (down_trylock(&rtc->char_sem)) ++ return -EBUSY; ++ ++ file->private_data = &rtc->class_dev; ++ ++ err = ops->open ? ops->open(rtc->class_dev.dev) : 0; ++ if (err == 0) { ++ ++ spin_lock_irq(&rtc->irq_lock); ++ rtc->irq_data = 0; ++ spin_unlock_irq(&rtc->irq_lock); ++ ++ return 0; ++ } ++ ++ /* something has gone wrong, release the lock */ ++ up(&rtc->char_sem); ++ return err; ++} ++ ++ ++static ssize_t ++rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) ++{ ++ struct rtc_device *rtc = to_rtc_device(file->private_data); ++ ++ DECLARE_WAITQUEUE(wait, current); ++ unsigned long data; ++ ssize_t ret; ++ ++ if (count < sizeof(unsigned long)) ++ return -EINVAL; ++ ++ add_wait_queue(&rtc->irq_queue, &wait); ++ do { ++ __set_current_state(TASK_INTERRUPTIBLE); ++ ++ spin_lock_irq(&rtc->irq_lock); ++ data = rtc->irq_data; ++ rtc->irq_data = 0; ++ spin_unlock_irq(&rtc->irq_lock); ++ ++ if (data != 0) { ++ ret = 0; ++ break; ++ } ++ if (file->f_flags & O_NONBLOCK) { ++ ret = -EAGAIN; ++ break; ++ } ++ if (signal_pending(current)) { ++ ret = -ERESTARTSYS; ++ break; ++ } ++ schedule(); ++ } while (1); ++ set_current_state(TASK_RUNNING); ++ remove_wait_queue(&rtc->irq_queue, &wait); ++ ++ if (ret == 0) { ++ ret = put_user(data, (unsigned long __user *)buf); ++ if (ret == 0) ++ ret = sizeof(unsigned long); ++ } ++ return ret; ++} ++ ++static unsigned int rtc_dev_poll(struct file *file, poll_table *wait) ++{ ++ struct rtc_device *rtc = to_rtc_device(file->private_data); ++ unsigned long data; ++ ++ poll_wait(file, &rtc->irq_queue, wait); ++ ++ spin_lock_irq(&rtc->irq_lock); ++ data = rtc->irq_data; ++ spin_unlock_irq(&rtc->irq_lock); ++ ++ return data != 0 ? POLLIN | POLLRDNORM : 0; ++} ++ ++static int rtc_dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ int err = 0; ++ struct class_device *class_dev = file->private_data; ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ struct rtc_class_ops *ops = rtc->ops; ++ struct rtc_time tm; ++ struct rtc_wkalrm alarm; ++ void __user *uarg = (void __user *) arg; ++ ++ /* avoid conflicting IRQ users */ ++ if (cmd == RTC_PIE_ON || cmd == RTC_PIE_OFF || cmd == RTC_IRQP_SET) { ++ spin_lock(&rtc->irq_task_lock); ++ if (rtc->irq_task) ++ err = -EBUSY; ++ spin_unlock(&rtc->irq_task_lock); ++ ++ if (err < 0) ++ return err; ++ } ++ ++ /* try the driver's ioctl interface */ ++ if (ops->ioctl) { ++ err = ops->ioctl(class_dev->dev, cmd, arg); ++ if (err < 0 && err != -EINVAL) ++ return err; ++ } ++ ++ /* if the driver does not provide the ioctl interface ++ * or if that particular ioctl was not implemented ++ * (-EINVAL), we will try to emulate here. ++ */ ++ ++ switch (cmd) { ++ case RTC_ALM_READ: ++ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0) ++ return err; ++ ++ if ((err = copy_to_user(uarg, &alarm.time, sizeof(tm)))) ++ return -EFAULT; ++ break; ++ ++ case RTC_ALM_SET: ++ if ((err = copy_from_user(&alarm.time, uarg, sizeof(tm)))) ++ return -EFAULT; ++ ++ alarm.enabled = 0; ++ alarm.pending = 0; ++ alarm.time.tm_mday = -1; ++ alarm.time.tm_mon = -1; ++ alarm.time.tm_year = -1; ++ alarm.time.tm_wday = -1; ++ alarm.time.tm_yday = -1; ++ alarm.time.tm_isdst = -1; ++ err = rtc_set_alarm(class_dev, &alarm); ++ break; ++ ++ case RTC_RD_TIME: ++ if ((err = rtc_read_time(class_dev, &tm)) < 0) ++ return err; ++ ++ if ((err = copy_to_user(uarg, &tm, sizeof(tm)))) ++ return -EFAULT; ++ break; ++ ++ case RTC_SET_TIME: ++ if (!capable(CAP_SYS_TIME)) ++ return -EACCES; ++ ++ if ((err = copy_from_user(&tm, uarg, sizeof(tm)))) ++ return -EFAULT; ++ ++ err = rtc_set_time(class_dev, &tm); ++ break; ++#if 0 ++ case RTC_EPOCH_SET: ++#ifndef rtc_epoch ++ /* ++ * There were no RTC clocks before 1900. ++ */ ++ if (arg < 1900) { ++ err = -EINVAL; ++ break; ++ } ++ if (!capable(CAP_SYS_TIME)) { ++ err = -EACCES; ++ break; ++ } ++ rtc_epoch = arg; ++ err = 0; ++#endif ++ break; ++ ++ case RTC_EPOCH_READ: ++ err = put_user(rtc_epoch, (unsigned long __user *)uarg); ++ break; ++#endif ++ case RTC_WKALM_SET: ++ if ((err = copy_from_user(&alarm, uarg, sizeof(alarm)))) ++ return -EFAULT; ++ ++ err = rtc_set_alarm(class_dev, &alarm); ++ break; ++ ++ case RTC_WKALM_RD: ++ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0) ++ return err; ++ ++ if ((err = copy_to_user(uarg, &alarm, sizeof(alarm)))) ++ return -EFAULT; ++ break; ++ ++ default: ++ err = -EINVAL; ++ break; ++ } ++ ++ return err; ++} ++ ++static int rtc_dev_release(struct inode *inode, struct file *file) ++{ ++ struct rtc_device *rtc = to_rtc_device(file->private_data); ++ ++ if (rtc->ops->release) ++ rtc->ops->release(rtc->class_dev.dev); ++ ++ spin_lock_irq(&rtc->irq_lock); ++ rtc->irq_data = 0; ++ spin_unlock_irq(&rtc->irq_lock); ++ ++ up(&rtc->char_sem); ++ return 0; ++} ++ ++static int rtc_dev_fasync(int fd, struct file *file, int on) ++{ ++ struct rtc_device *rtc = to_rtc_device(file->private_data); ++ return fasync_helper(fd, file, on, &rtc->async_queue); ++} ++ ++static struct file_operations rtc_dev_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .read = rtc_dev_read, ++ .poll = rtc_dev_poll, ++ .ioctl = rtc_dev_ioctl, ++ .open = rtc_dev_open, ++ .release = rtc_dev_release, ++ .fasync = rtc_dev_fasync, ++}; ++ ++static ssize_t rtc_dev_show_dev(struct class_device *class_dev, char *buf) ++{ ++ return print_dev_t(buf, class_dev->devt); ++} ++static CLASS_DEVICE_ATTR(dev, S_IRUGO, rtc_dev_show_dev, NULL); ++ ++/* insertion/removal hooks */ ++ ++static int rtc_dev_add_device(struct class_device *class_dev, ++ struct class_interface *class_intf) ++{ ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ if (rtc->id >= RTC_DEV_MAX) { ++ dev_err(class_dev->dev, "too many RTCs\n"); ++ return -EINVAL; ++ } ++ ++ init_MUTEX(&rtc->char_sem); ++ spin_lock_init(&rtc->irq_lock); ++ init_waitqueue_head(&rtc->irq_queue); ++ ++ cdev_init(&rtc->char_dev, &rtc_dev_fops); ++ rtc->char_dev.owner = rtc->owner; ++ class_dev->devt = MKDEV(MAJOR(rtc_devt), rtc->id); ++ ++ if (cdev_add(&rtc->char_dev, class_dev->devt, 1)) { ++ cdev_del(&rtc->char_dev); ++ ++ dev_err(class_dev->dev, ++ "failed to add char device %d:%d\n", ++ MAJOR(class_dev->devt), ++ MINOR(class_dev->devt)); ++ ++ class_dev->devt = MKDEV(0, 0); ++ return -ENODEV; ++ } ++ ++ class_device_create_file(class_dev, &class_device_attr_dev); ++ ++ dev_info(class_dev->dev, "rtc intf: dev (%d:%d)\n", ++ MAJOR(class_dev->devt), ++ MINOR(class_dev->devt)); ++ ++ kobject_hotplug(&class_dev->kobj, KOBJ_ADD); ++ ++ return 0; ++} ++ ++static void rtc_dev_remove_device(struct class_device *class_dev, ++ struct class_interface *class_intf) ++{ ++ struct rtc_device *rtc = to_rtc_device(class_dev); ++ ++ class_device_remove_file(class_dev, &class_device_attr_dev); ++ ++ if (MAJOR(class_dev->devt)) { ++ dev_dbg(class_dev->dev, "removing char %d:%d\n", ++ MAJOR(class_dev->devt), ++ MINOR(class_dev->devt)); ++ cdev_del(&rtc->char_dev); ++ ++ kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE); ++ ++ class_dev->devt = MKDEV(0, 0); ++ } ++} ++ ++/* interface registration */ ++ ++struct class_interface rtc_dev_interface = { ++ .add = &rtc_dev_add_device, ++ .remove = &rtc_dev_remove_device, ++}; ++ ++static int __init rtc_dev_init(void) ++{ ++ int err; ++ ++ if ((err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc")) < 0) { ++ printk(KERN_ERR "%s: failed to allocate char dev region\n", ++ __FILE__); ++ return err; ++ } ++ ++ if ((err = rtc_interface_register(&rtc_dev_interface)) < 0) { ++ printk(KERN_ERR "%s: failed to register the interface\n", ++ __FILE__); ++ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static void __exit rtc_dev_exit(void) ++{ ++ class_interface_unregister(&rtc_dev_interface); ++ ++ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX); ++} ++ ++module_init(rtc_dev_init); ++module_exit(rtc_dev_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("RTC class dev interface"); ++MODULE_LICENSE("GPL"); +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/rtc-x1205.c 2006-01-04 01:27:17.000000000 +0100 +@@ -0,0 +1,725 @@ ++/* ++ * An i2c driver for the Xicor/Intersil X1205 RTC ++ * Copyright 2004 Karen Spearel ++ * Copyright 2005 Alessandro Zummo ++ * ++ * please send all reports to: ++ * kas11 at tampabay dot rr dot com ++ * a dot zummo at towertech dot it ++ * ++ * based on a lot of other RTC drivers. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRV_VERSION "1.0.5" ++ ++/* Addresses to scan: none. This chip is located at ++ * 0x6f and uses a two bytes register addressing. ++ * Two bytes need to be written to read a single register, ++ * while most other chips just require one and take the second ++ * one as the data to be written. To prevent corrupting ++ * unknown chips, the user must explicitely set the probe parameter. ++ */ ++ ++static unsigned short normal_i2c[] = { I2C_CLIENT_END }; ++ ++/* Insmod parameters */ ++I2C_CLIENT_INSMOD; ++I2C_CLIENT_MODULE_PARM(hctosys, ++ "Set the system time from the hardware clock upon initialization"); ++ ++/* offsets into CCR area */ ++ ++#define CCR_SEC 0 ++#define CCR_MIN 1 ++#define CCR_HOUR 2 ++#define CCR_MDAY 3 ++#define CCR_MONTH 4 ++#define CCR_YEAR 5 ++#define CCR_WDAY 6 ++#define CCR_Y2K 7 ++ ++#define X1205_REG_SR 0x3F /* status register */ ++#define X1205_REG_Y2K 0x37 ++#define X1205_REG_DW 0x36 ++#define X1205_REG_YR 0x35 ++#define X1205_REG_MO 0x34 ++#define X1205_REG_DT 0x33 ++#define X1205_REG_HR 0x32 ++#define X1205_REG_MN 0x31 ++#define X1205_REG_SC 0x30 ++#define X1205_REG_DTR 0x13 ++#define X1205_REG_ATR 0x12 ++#define X1205_REG_INT 0x11 ++#define X1205_REG_0 0x10 ++#define X1205_REG_Y2K1 0x0F ++#define X1205_REG_DWA1 0x0E ++#define X1205_REG_YRA1 0x0D ++#define X1205_REG_MOA1 0x0C ++#define X1205_REG_DTA1 0x0B ++#define X1205_REG_HRA1 0x0A ++#define X1205_REG_MNA1 0x09 ++#define X1205_REG_SCA1 0x08 ++#define X1205_REG_Y2K0 0x07 ++#define X1205_REG_DWA0 0x06 ++#define X1205_REG_YRA0 0x05 ++#define X1205_REG_MOA0 0x04 ++#define X1205_REG_DTA0 0x03 ++#define X1205_REG_HRA0 0x02 ++#define X1205_REG_MNA0 0x01 ++#define X1205_REG_SCA0 0x00 ++ ++#define X1205_CCR_BASE 0x30 /* Base address of CCR */ ++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ ++ ++#define X1205_SR_RTCF 0x01 /* Clock failure */ ++#define X1205_SR_WEL 0x02 /* Write Enable Latch */ ++#define X1205_SR_RWEL 0x04 /* Register Write Enable */ ++ ++#define X1205_DTR_DTR0 0x01 ++#define X1205_DTR_DTR1 0x02 ++#define X1205_DTR_DTR2 0x04 ++ ++#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ ++ ++/* Prototypes */ ++static int x1205_attach(struct i2c_adapter *adapter); ++static int x1205_detach(struct i2c_client *client); ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); ++ ++static struct i2c_driver x1205_driver = { ++ .owner = THIS_MODULE, ++ .name = "x1205", ++ .flags = I2C_DF_NOTIFY, ++ .attach_adapter = &x1205_attach, ++ .detach_client = &x1205_detach, ++}; ++ ++/* ++ * In the routines that deal directly with the x1205 hardware, we use ++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch ++ * Epoch is initialized as 2000. Time is set to UTC. ++ */ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, ++ unsigned char reg_base) ++{ ++ unsigned char dt_addr[2] = { 0, reg_base }; ++ ++ unsigned char buf[8]; ++ ++ struct i2c_msg msgs[] = { ++ { client->addr, 0, 2, dt_addr }, /* setup read ptr */ ++ { client->addr, I2C_M_RD, 8, buf }, /* read date */ ++ }; ++ ++ /* read date registers */ ++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { ++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ dev_dbg(&client->dev, ++ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " ++ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", ++ __FUNCTION__, ++ buf[0], buf[1], buf[2], buf[3], ++ buf[4], buf[5], buf[6], buf[7]); ++ ++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); ++ tm->tm_min = BCD2BIN(buf[CCR_MIN]); ++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ ++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); ++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */ ++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) ++ + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900; ++ tm->tm_wday = buf[CCR_WDAY]; ++ ++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ return 0; ++} ++ ++static int x1205_get_status(struct i2c_client *client, unsigned char *sr) ++{ ++ static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; ++ ++ struct i2c_msg msgs[] = { ++ { client->addr, 0, 2, sr_addr }, /* setup read ptr */ ++ { client->addr, I2C_M_RD, 1, sr }, /* read status */ ++ }; ++ ++ /* read status register */ ++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { ++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, ++ int datetoo, u8 reg_base) ++{ ++ int i, xfer; ++ unsigned char buf[8]; ++ ++ static const unsigned char wel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL }; ++ ++ static const unsigned char rwel[3] = { 0, X1205_REG_SR, ++ X1205_SR_WEL | X1205_SR_RWEL }; ++ ++ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; ++ ++ dev_dbg(&client->dev, ++ "%s: secs=%d, mins=%d, hours=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour); ++ ++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN] = BIN2BCD(tm->tm_min); ++ ++ /* set hour and 24hr bit */ ++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; ++ ++ /* should we also set the date? */ ++ if (datetoo) { ++ dev_dbg(&client->dev, ++ "%s: mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); ++ ++ /* month, 1 - 12 */ ++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1); ++ ++ /* year, since the rtc epoch*/ ++ buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100); ++ buf[CCR_WDAY] = tm->tm_wday & 0x07; ++ buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); ++ } ++ ++ /* this sequence is required to unlock the chip */ ++ xfer = i2c_master_send(client, wel, 3); ++ if (xfer != 3) { ++ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); ++ return -EIO; ++ } ++ ++ xfer = i2c_master_send(client, rwel, 3); ++ if (xfer != 3) { ++ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); ++ return -EIO; ++ } ++ ++ /* write register's data */ ++ for (i = 0; i < (datetoo ? 8 : 3); i++) { ++ unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; ++ ++ xfer = i2c_master_send(client, rdata, 3); ++ if (xfer != 3) { ++ dev_err(&client->dev, ++ "%s: xfer=%d addr=%02x, data=%02x\n", ++ __FUNCTION__, ++ xfer, rdata[1], rdata[2]); ++ return -EIO; ++ } ++ }; ++ ++ /* disable further writes */ ++ xfer = i2c_master_send(client, diswe, 3); ++ if (xfer != 3) { ++ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static int x1205_fix_osc(struct i2c_client *client) ++{ ++ int err; ++ struct rtc_time tm; ++ ++ tm.tm_hour = 0; ++ tm.tm_min = 0; ++ tm.tm_sec = 0; ++ ++ if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0) ++ dev_err(&client->dev, ++ "unable to restart the clock\n"); ++ ++ return err; ++} ++ ++static int x1205_get_dtrim(struct i2c_client *client, int *trim) ++{ ++ unsigned char dtr; ++ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; ++ ++ struct i2c_msg msgs[] = { ++ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ ++ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ ++ }; ++ ++ /* read dtr register */ ++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { ++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); ++ ++ *trim = 0; ++ ++ if (dtr & X1205_DTR_DTR0) ++ *trim += 20; ++ ++ if (dtr & X1205_DTR_DTR1) ++ *trim += 10; ++ ++ if (dtr & X1205_DTR_DTR2) ++ *trim = -*trim; ++ ++ return 0; ++} ++ ++static int x1205_get_atrim(struct i2c_client *client, int *trim) ++{ ++ s8 atr; ++ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; ++ ++ struct i2c_msg msgs[] = { ++ { client->addr, 0, 2, atr_addr }, /* setup read ptr */ ++ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ ++ }; ++ ++ /* read atr register */ ++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { ++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); ++ ++ /* atr is a two's complement value on 6 bits, ++ * perform sign extension. The formula is ++ * Catr = (atr * 0.25pF) + 11.00pF. ++ */ ++ if (atr & 0x20) ++ atr |= 0xC0; ++ ++ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); ++ ++ *trim = (atr * 250) + 11000; ++ ++ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); ++ ++ return 0; ++} ++ ++static int x1205_hctosys(struct i2c_client *client) ++{ ++ int err; ++ ++ struct rtc_time tm; ++ struct timespec tv; ++ unsigned char sr; ++ ++ if ((err = x1205_get_status(client, &sr)) < 0) ++ return err; ++ ++ /* Don't set if we had a power failure */ ++ if (sr & X1205_SR_RTCF) ++ return -EINVAL; ++ ++ if ((err = x1205_get_datetime(client, &tm, X1205_CCR_BASE)) < 0) ++ return err; ++ ++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary ++ * whether it stores the most close value or the value with partial ++ * seconds truncated. However, it is important that we use it to store ++ * the truncated value. This is because otherwise it is necessary, ++ * in an rtc sync function, to read both xtime.tv_sec and ++ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read ++ * of >32bits is not possible. So storing the most close value would ++ * slow down the sync API. So here we have the truncated value and ++ * the best guess is to add 0.5s. ++ */ ++ ++ tv.tv_nsec = NSEC_PER_SEC >> 1; ++ ++ rtc_tm_to_time(&tm, &tv.tv_sec); ++ ++ do_settimeofday(&tv); ++ ++ dev_info(&client->dev, ++ "setting the system clock to %d-%d-%d %d:%d:%d\n", ++ tm.tm_year + 1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, tm.tm_min, ++ tm.tm_sec); ++ ++ return 0; ++} ++ ++struct x1205_limit ++{ ++ unsigned char reg; ++ unsigned char mask; ++ unsigned char min; ++ unsigned char max; ++}; ++ ++static int x1205_validate_client(struct i2c_client *client) ++{ ++ int i, xfer; ++ ++ /* Probe array. We will read the register at the specified ++ * address and check if the given bits are zero. ++ */ ++ static const unsigned char probe_zero_pattern[] = { ++ /* register, mask */ ++ X1205_REG_SR, 0x18, ++ X1205_REG_DTR, 0xF8, ++ X1205_REG_ATR, 0xC0, ++ X1205_REG_INT, 0x18, ++ X1205_REG_0, 0xFF, ++ }; ++ ++ static const struct x1205_limit probe_limits_pattern[] = { ++ /* register, mask, min, max */ ++ { X1205_REG_Y2K, 0xFF, 19, 20 }, ++ { X1205_REG_DW, 0xFF, 0, 6 }, ++ { X1205_REG_YR, 0xFF, 0, 99 }, ++ { X1205_REG_MO, 0xFF, 0, 12 }, ++ { X1205_REG_DT, 0xFF, 0, 31 }, ++ { X1205_REG_HR, 0x7F, 0, 23 }, ++ { X1205_REG_MN, 0xFF, 0, 59 }, ++ { X1205_REG_SC, 0xFF, 0, 59 }, ++ { X1205_REG_Y2K1, 0xFF, 19, 20 }, ++ { X1205_REG_Y2K0, 0xFF, 19, 20 }, ++ }; ++ ++ /* check that registers have bits a 0 where expected */ ++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { ++ unsigned char buf; ++ ++ unsigned char addr[2] = { 0, probe_zero_pattern[i] }; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, ++ { client->addr, I2C_M_RD, 1, &buf }, ++ }; ++ ++ xfer = i2c_transfer(client->adapter, msgs, 2); ++ if (xfer != 2) { ++ dev_err(&client->adapter->dev, ++ "%s: could not read register %x\n", ++ __FUNCTION__, addr[1]); ++ ++ return -EIO; ++ } ++ ++ if ((buf & probe_zero_pattern[i+1]) != 0) { ++ dev_err(&client->adapter->dev, ++ "%s: register=%02x, zero pattern=%d, value=%x\n", ++ __FUNCTION__, addr[1], i, buf); ++ ++ return -ENODEV; ++ } ++ } ++ ++ /* check limits (only registers with bcd values) */ ++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { ++ unsigned char reg, value; ++ ++ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; ++ ++ struct i2c_msg msgs[2] = { ++ { client->addr, 0, 2, addr }, ++ { client->addr, I2C_M_RD, 1, ® }, ++ }; ++ ++ xfer = i2c_transfer(client->adapter, msgs, 2); ++ ++ if (xfer != 2) { ++ dev_err(&client->adapter->dev, ++ "%s: could not read register %x\n", ++ __FUNCTION__, addr[1]); ++ ++ return -EIO; ++ } ++ ++ value = BCD2BIN(reg & probe_limits_pattern[i].mask); ++ ++ if (value > probe_limits_pattern[i].max || ++ value < probe_limits_pattern[i].min) { ++ dev_dbg(&client->adapter->dev, ++ "%s: register=%x, lim pattern=%d, value=%d\n", ++ __FUNCTION__, addr[1], i, value); ++ ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static int x1205_rtc_read_alarm(struct device *dev, ++ struct rtc_wkalrm *alrm) ++{ ++ return x1205_get_datetime(to_i2c_client(dev), ++ &alrm->time, X1205_ALM0_BASE); ++} ++ ++static int x1205_rtc_set_alarm(struct device *dev, ++ struct rtc_wkalrm *alrm) ++{ ++ return x1205_set_datetime(to_i2c_client(dev), ++ &alrm->time, 1, X1205_ALM0_BASE); ++} ++ ++static int x1205_rtc_read_time(struct device *dev, ++ struct rtc_time *tm) ++{ ++ return x1205_get_datetime(to_i2c_client(dev), ++ tm, X1205_CCR_BASE); ++} ++ ++static int x1205_rtc_set_time(struct device *dev, ++ struct rtc_time *tm) ++{ ++ return x1205_set_datetime(to_i2c_client(dev), ++ tm, 1, X1205_CCR_BASE); ++} ++ ++static int x1205_rtc_set_mmss(struct device *dev, unsigned long secs) ++{ ++ int err; ++ ++ struct rtc_time new_tm, old_tm; ++ ++ if ((err = x1205_rtc_read_time(dev, &old_tm) == 0)) ++ return err; ++ ++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */ ++ new_tm.tm_sec = secs % 60; ++ secs /= 60; ++ new_tm.tm_min = secs % 60; ++ secs /= 60; ++ new_tm.tm_hour = secs % 24; ++ ++ /* ++ * avoid writing when we're going to change the day ++ * of the month. We will retry in the next minute. ++ * This basically means that if the RTC must not drift ++ * by more than 1 minute in 11 minutes. ++ */ ++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || ++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) ++ return 1; ++ ++ return x1205_rtc_set_time(dev, &new_tm); ++} ++ ++static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) ++{ ++ int err, dtrim, atrim; ++ ++ seq_printf(seq, "24hr\t\t: yes\n"); ++ ++ err = x1205_get_dtrim(to_i2c_client(dev), &dtrim); ++ if (err == 0) ++ seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim); ++ ++ err = x1205_get_atrim(to_i2c_client(dev), &atrim); ++ if (err == 0) ++ seq_printf(seq, "analog_trim\t: %d.%02d pF\n", ++ atrim / 1000, atrim % 1000); ++ return 0; ++} ++ ++static struct rtc_class_ops x1205_rtc_ops = { ++ .proc = x1205_rtc_proc, ++ .read_time = x1205_rtc_read_time, ++ .set_time = x1205_rtc_set_time, ++ .read_alarm = x1205_rtc_read_alarm, ++ .set_alarm = x1205_rtc_set_alarm, ++ .set_mmss = x1205_rtc_set_mmss, ++}; ++ ++static ssize_t x1205_sysfs_show_atrim(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ int atrim; ++ ++ if (x1205_get_atrim(to_i2c_client(dev), &atrim) == 0) { ++ return sprintf(buf, "%d.%02d pF\n", ++ atrim / 1000, atrim % 1000); } ++ return 0; ++} ++static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL); ++ ++static ssize_t x1205_sysfs_show_dtrim(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ int dtrim; ++ ++ if (x1205_get_dtrim(to_i2c_client(dev), &dtrim) == 0) { ++ return sprintf(buf, "%d ppm\n", dtrim); ++ } ++ return 0; ++} ++static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL); ++ ++ ++static int x1205_attach(struct i2c_adapter *adapter) ++{ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ return i2c_probe(adapter, &addr_data, x1205_probe); ++} ++ ++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) ++{ ++ int err = 0; ++ unsigned char sr; ++ struct i2c_client *client; ++ struct rtc_device *rtc; ++ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { ++ err = -ENODEV; ++ goto exit; ++ } ++ ++ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ ++ /* I2C client */ ++ client->addr = address; ++ client->driver = &x1205_driver; ++ client->adapter = adapter; ++ ++ strlcpy(client->name, x1205_driver.name, I2C_NAME_SIZE); ++ ++ /* Verify the chip is really an X1205 */ ++ if (kind < 0) { ++ if (x1205_validate_client(client) < 0) { ++ err = -ENODEV; ++ goto exit_kfree; ++ } ++ } ++ ++ /* Inform the i2c layer */ ++ if ((err = i2c_attach_client(client))) ++ goto exit_kfree; ++ ++ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); ++ ++ rtc = rtc_device_register(x1205_driver.name, &client->dev, ++ &x1205_rtc_ops, THIS_MODULE); ++ ++ if (IS_ERR(rtc)) { ++ err = PTR_ERR(rtc); ++ dev_err(&client->dev, ++ "unable to register the class device\n"); ++ goto exit_detach; ++ } ++ ++ i2c_set_clientdata(client, rtc); ++ ++ /* Check for power failures and eventualy enable the osc */ ++ if ((err = x1205_get_status(client, &sr)) == 0) { ++ if (sr & X1205_SR_RTCF) { ++ dev_err(&client->dev, ++ "power failure detected, " ++ "please set the clock\n"); ++ udelay(50); ++ x1205_fix_osc(client); ++ } ++ } ++ else ++ dev_err(&client->dev, "couldn't read status\n"); ++ ++ /* If requested, set the system time */ ++ if (hctosys) { ++ if ((err = x1205_hctosys(client)) < 0) ++ dev_err(&client->dev, ++ "unable to set the system clock\n"); ++ } ++ ++ device_create_file(&client->dev, &dev_attr_atrim); ++ device_create_file(&client->dev, &dev_attr_dtrim); ++ ++ return 0; ++ ++exit_detach: ++ i2c_detach_client(client); ++ ++exit_kfree: ++ kfree(client); ++ ++exit: ++ return err; ++} ++ ++static int x1205_detach(struct i2c_client *client) ++{ ++ int err; ++ struct rtc_device *rtc = i2c_get_clientdata(client); ++ ++ dev_dbg(&client->dev, "%s\n", __FUNCTION__); ++ ++ if (rtc) ++ rtc_device_unregister(rtc); ++ ++ if ((err = i2c_detach_client(client))) ++ return err; ++ ++ kfree(client); ++ ++ return 0; ++} ++ ++static int __init x1205_init(void) ++{ ++ return i2c_add_driver(&x1205_driver); ++} ++ ++static void __exit x1205_exit(void) ++{ ++ i2c_del_driver(&x1205_driver); ++} ++ ++MODULE_AUTHOR( ++ "Karen Spearel , " ++ "Alessandro Zummo "); ++MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_VERSION); ++ ++module_init(x1205_init); ++module_exit(x1205_exit); +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/rtc-test.c 2006-01-04 01:27:19.000000000 +0100 +@@ -0,0 +1,189 @@ ++/* ++ * An RTC test device/driver ++ * Copyright (C) 2005 Tower Technologies ++ * Author: Alessandro Zummo ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++static int test_rtc_read_alarm(struct device *dev, ++ struct rtc_wkalrm *alrm) ++{ ++ return 0; ++} ++ ++static int test_rtc_set_alarm(struct device *dev, ++ struct rtc_wkalrm *alrm) ++{ ++ return 0; ++} ++ ++static int test_rtc_read_time(struct device *dev, ++ struct rtc_time *tm) ++{ ++ rtc_time_to_tm(get_seconds(), tm); ++ return 0; ++} ++ ++static int test_rtc_set_time(struct device *dev, ++ struct rtc_time *tm) ++{ ++ return 0; ++} ++ ++static int test_rtc_set_mmss(struct device *dev, unsigned long secs) ++{ ++ return 0; ++} ++ ++static int test_rtc_proc(struct device *dev, struct seq_file *seq) ++{ ++ struct platform_device *plat_dev = to_platform_device(dev); ++ ++ seq_printf(seq, "24hr\t\t: yes\n"); ++ seq_printf(seq, "test\t\t: yes\n"); ++ seq_printf(seq, "id\t\t: %d\n", plat_dev->id); ++ ++ return 0; ++} ++ ++static int test_rtc_ioctl(struct device *dev, unsigned int cmd, ++ unsigned long arg) ++{ ++ /* We do support interrupts, they're generated ++ * using the sysfs interface. ++ */ ++ switch (cmd) { ++ case RTC_PIE_ON: ++ case RTC_PIE_OFF: ++ case RTC_UIE_ON: ++ case RTC_UIE_OFF: ++ case RTC_AIE_ON: ++ case RTC_AIE_OFF: ++ return 0; ++ ++ default: ++ return -EINVAL; ++ } ++} ++ ++static struct rtc_class_ops test_rtc_ops = { ++ .proc = test_rtc_proc, ++ .read_time = test_rtc_read_time, ++ .set_time = test_rtc_set_time, ++ .read_alarm = test_rtc_read_alarm, ++ .set_alarm = test_rtc_set_alarm, ++ .set_mmss = test_rtc_set_mmss, ++ .ioctl = test_rtc_ioctl, ++}; ++ ++static ssize_t test_irq_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", 42); ++} ++static ssize_t test_irq_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ int retval; ++ struct platform_device *plat_dev = to_platform_device(dev); ++ struct rtc_device *rtc = platform_get_drvdata(plat_dev); ++ ++ retval = count; ++ if (strncmp(buf, "tick", 4) == 0) ++ rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF); ++ else if (strncmp(buf, "alarm", 5) == 0) ++ rtc_update_irq(&rtc->class_dev, 1, RTC_AF | RTC_IRQF); ++ else if (strncmp(buf, "update", 6) == 0) ++ rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF); ++ else ++ retval = -EINVAL; ++ ++ return retval; ++} ++static DEVICE_ATTR(irq, S_IRUGO | S_IWUSR, test_irq_show, test_irq_store); ++ ++static int test_probe(struct platform_device *plat_dev) ++{ ++ int err; ++ struct rtc_device *rtc = rtc_device_register("test", &plat_dev->dev, ++ &test_rtc_ops, THIS_MODULE); ++ if (IS_ERR(rtc)) { ++ err = PTR_ERR(rtc); ++ dev_err(&plat_dev->dev, ++ "unable to register the class device\n"); ++ return err; ++ } ++ device_create_file(&plat_dev->dev, &dev_attr_irq); ++ ++ platform_set_drvdata(plat_dev, rtc); ++ ++ return 0; ++} ++ ++static int test_remove(struct platform_device *plat_dev) ++{ ++ struct rtc_device *rtc = platform_get_drvdata(plat_dev); ++ ++ rtc_device_unregister(rtc); ++ device_remove_file(&plat_dev->dev, &dev_attr_irq); ++ ++ return 0; ++} ++ ++static void test_release(struct device * dev) ++{ ++} ++ ++struct platform_device test_dev_zero = { ++ .name = "rtc-test", ++ .id = 0, ++ .dev.release = test_release, ++}; ++ ++struct platform_device test_dev_one = { ++ .name = "rtc-test", ++ .id = 1, ++ .dev.release = test_release, ++}; ++ ++struct platform_driver test_drv = { ++ .probe = test_probe, ++ .remove = test_remove, ++ .driver = { ++ .name = "rtc-test", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init test_init(void) ++{ ++ platform_device_register(&test_dev_zero); ++ platform_device_register(&test_dev_one); ++ platform_driver_register(&test_drv); ++ ++ return 0; ++} ++ ++static void __exit test_exit(void) ++{ ++ platform_driver_unregister(&test_drv); ++ platform_device_unregister(&test_dev_zero); ++ platform_device_unregister(&test_dev_one); ++} ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("RTC test driver/device"); ++MODULE_LICENSE("GPL"); ++ ++module_init(test_init); ++module_exit(test_exit); +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-nslu2/drivers/rtc/rtc-ds1672.c 2006-01-04 01:27:21.000000000 +0100 +@@ -0,0 +1,266 @@ ++/* ++ * An rtc/i2c driver for the Dallas DS1672 ++ * Copyright 2005 Alessandro Zummo ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++ ++#define DRV_VERSION "0.1" ++ ++/* Addresses to scan: none. This chip cannot be detected. */ ++static unsigned short normal_i2c[] = { I2C_CLIENT_END }; ++ ++/* Insmod parameters */ ++I2C_CLIENT_INSMOD; ++I2C_CLIENT_MODULE_PARM(hctosys, ++ "Set the system time from the hardware clock upon initialization"); ++ ++/* Registers */ ++ ++#define DS1672_REG_CNT_BASE 0 ++#define DS1672_REG_CONTROL 4 ++#define DS1672_REG_TRICKLE 5 ++ ++ ++/* Prototypes */ ++static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind); ++ ++/* ++ * In the routines that deal directly with the ds1672 hardware, we use ++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch ++ * Epoch is initialized as 2000. Time is set to UTC. ++ */ ++static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm) ++{ ++ unsigned long time; ++ unsigned char buf[4]; ++ ++ dev_dbg(&client->dev, ++ "%s: raw read data - counters=%02x,%02x,%02x,%02x\n" ++ __FUNCTION__, ++ buf[0], buf[1], buf[2], buf[3]); ++ ++ time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; ++ ++ rtc_time_to_tm(time, tm); ++ ++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ return 0; ++} ++ ++static int ds1672_set_mmss(struct i2c_client *client, unsigned long secs) ++{ ++ int xfer; ++ unsigned char buf[5]; ++ ++ buf[0] = DS1672_REG_CNT_BASE; ++ buf[1] = secs & 0x000000FF; ++ buf[2] = (secs & 0x0000FF00) >> 8; ++ buf[3] = (secs & 0x00FF0000) >> 16; ++ buf[4] = (secs & 0xFF000000) >> 24; ++ ++ xfer = i2c_master_send(client, buf, 5); ++ if (xfer != 5) { ++ dev_err(&client->dev, "%s: send: %d\n", __FUNCTION__, xfer); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static int ds1672_set_datetime(struct i2c_client *client, struct rtc_time *tm) ++{ ++ unsigned long secs; ++ ++ dev_dbg(&client->dev, ++ "%s: secs=%d, mins=%d, hours=%d, ", ++ "mday=%d, mon=%d, year=%d, wday=%d\n", ++ __FUNCTION__, ++ tm->tm_sec, tm->tm_min, tm->tm_hour, ++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); ++ ++ rtc_tm_to_time(tm, &secs); ++ ++ return ds1672_set_mmss(client, secs); ++} ++ ++static int ds1672_hctosys(struct i2c_client *client) ++{ ++ int err; ++ struct rtc_time tm; ++ struct timespec tv; ++ ++ if ((err = ds1672_get_datetime(client, &tm)) != 0) ++ return err; ++ ++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary ++ * whether it stores the most close value or the value with partial ++ * seconds truncated. However, it is important that we use it to store ++ * the truncated value. This is because otherwise it is necessary, ++ * in an rtc sync function, to read both xtime.tv_sec and ++ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read ++ * of >32bits is not possible. So storing the most close value would ++ * slow down the sync API. So here we have the truncated value and ++ * the best guess is to add 0.5s. ++ */ ++ ++ tv.tv_nsec = NSEC_PER_SEC >> 1; ++ ++ rtc_tm_to_time(&tm, &tv.tv_sec); ++ ++ do_settimeofday(&tv); ++ ++ dev_info(&client->dev, ++ "setting the system clock to %d-%02d-%02d %02d:%02d:%02d\n", ++ tm.tm_year + 1900, tm.tm_mon + 1, ++ tm.tm_mday, tm.tm_hour, tm.tm_min, ++ tm.tm_sec); ++ ++ return 0; ++} ++ ++static int ds1672_rtc_read_time(struct device *dev, struct rtc_time *tm) ++{ ++ return ds1672_get_datetime(to_i2c_client(dev), tm); ++} ++ ++static int ds1672_rtc_set_time(struct device *dev, struct rtc_time *tm) ++{ ++ return ds1672_set_datetime(to_i2c_client(dev), tm); ++} ++ ++static int ds1672_rtc_set_mmss(struct device *dev, unsigned long secs) ++{ ++ return ds1672_set_mmss(to_i2c_client(dev), secs); ++} ++ ++static struct rtc_class_ops ds1672_rtc_ops = { ++ .read_time = ds1672_rtc_read_time, ++ .set_time = ds1672_rtc_set_time, ++ .set_mmss = ds1672_rtc_set_mmss, ++}; ++ ++static int ds1672_attach(struct i2c_adapter *adapter) ++{ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ return i2c_probe(adapter, &addr_data, ds1672_probe); ++} ++ ++static int ds1672_detach(struct i2c_client *client) ++{ ++ int err; ++ struct rtc_device *rtc = i2c_get_clientdata(client); ++ ++ dev_dbg(&client->dev, "%s\n", __FUNCTION__); ++ ++ if (rtc) ++ rtc_device_unregister(rtc); ++ ++ if ((err = i2c_detach_client(client))) ++ return err; ++ ++ kfree(client); ++ ++ return 0; ++} ++ ++static struct i2c_driver ds1672_driver = { ++ .owner = THIS_MODULE, ++ .name = "ds1672", ++ .flags = I2C_DF_NOTIFY, ++ .attach_adapter = &ds1672_attach, ++ .detach_client = &ds1672_detach, ++}; ++ ++static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind) ++{ ++ int err = 0; ++ struct i2c_client *client; ++ struct rtc_device *rtc; ++ ++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { ++ err = -ENODEV; ++ goto exit; ++ } ++ ++ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ ++ /* I2C client */ ++ client->addr = address; ++ client->driver = &ds1672_driver; ++ client->adapter = adapter; ++ ++ strlcpy(client->name, ds1672_driver.name, I2C_NAME_SIZE); ++ ++ /* Inform the i2c layer */ ++ if ((err = i2c_attach_client(client))) ++ goto exit_kfree; ++ ++ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); ++ ++ rtc = rtc_device_register(ds1672_driver.name, &client->dev, ++ &ds1672_rtc_ops, THIS_MODULE); ++ ++ if (IS_ERR(rtc)) { ++ err = PTR_ERR(rtc); ++ dev_err(&client->dev, ++ "unable to register the class device\n"); ++ goto exit_detach; ++ } ++ ++ i2c_set_clientdata(client, rtc); ++ ++ /* If requested, set the system time */ ++ if (hctosys) { ++ if ((err = ds1672_hctosys(client)) < 0) ++ dev_err(&client->dev, ++ "unable to set the system clock\n"); ++ } ++ ++ return 0; ++ ++exit_detach: ++ i2c_detach_client(client); ++ ++exit_kfree: ++ kfree(client); ++ ++exit: ++ return err; ++} ++ ++static int __init ds1672_init(void) ++{ ++ return i2c_add_driver(&ds1672_driver); ++} ++ ++static void __exit ds1672_exit(void) ++{ ++ i2c_del_driver(&ds1672_driver); ++} ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("Dallas/Maxim DS1672 timekeeper driver"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_VERSION); ++ ++module_init(ds1672_init); ++module_exit(ds1672_exit); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch new file mode 100644 index 0000000000..12fdc4d96e --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch @@ -0,0 +1,184 @@ + drivers/input/misc/Kconfig | 12 +++ + drivers/input/misc/Makefile | 1 + drivers/input/misc/nslu2spkr.c | 148 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 161 insertions(+) + +--- linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP + tristate "M68k Beeper support" + depends on M68K + ++config INPUT_NSLU2_BEEPER ++ tristate "NSLU2 Beeper support" ++ depends on MACH_NSLU2 ++ help ++ Say Y here if you want the embedded beeper on the LinkSys NSLU2 ++ to be used for bells and whistles. ++ ++ If unsure, say Y. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called nslu2spkr. ++ + config INPUT_UINPUT + tristate "User level driver support" + help +--- linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp + obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o + obj-$(CONFIG_INPUT_UINPUT) += uinput.o + obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o ++obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o +--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,148 @@ ++/* ++ * drivers/input/misc/nslu2spkr.c ++ * ++ * NSLU2 Beeper driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++static unsigned int beep_on_startup = 1; ++module_param(beep_on_startup, bool, 0); ++MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup"); ++ ++DEFINE_SPINLOCK(beep_lock); ++ ++static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) ++{ ++ unsigned int count = 0; ++ unsigned long flags; ++ ++ if (type != EV_SND) ++ return -1; ++ ++ switch (code) { ++ case SND_BELL: ++ if (value) value = 1000; ++ case SND_TONE: ++ break; ++ default: ++ return -1; ++ } ++ ++ if (value > 20 && value < 32767) ++ count = (NSLU2_FREQ / (value*4)) - 1; ++ ++ spin_lock_irqsave(&beep_lock, flags); ++ ++ if (count) { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW); ++ ++ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ ++ } else { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH); ++ ++ *IXP4XX_OSRT2 = 0; ++ } ++ ++ spin_unlock_irqrestore(&beep_lock, flags); ++ ++ return 0; ++} ++ ++static struct input_dev nslu2_spkr_dev = { ++ .phys = "ixp420/gpio4", ++ .name = "NSLU2 Beeper", ++ .evbit[0] = BIT(EV_SND), ++ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE), ++ .event = nslu2_spkr_event, ++ .id = { ++ .bustype = BUS_HOST, ++ .vendor = 0x001f, ++ .product = 0x0001, ++ .version = 0x0100 ++ } ++}; ++ ++static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* clear interrupt */ ++ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; ++ ++ /* flip the beeper output */ ++ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM; ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init nslu2_spkr_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return -ENODEV; ++ ++ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler, ++ SA_INTERRUPT | SA_TIMER, "nslu2-beeper", NULL < 0)) { ++ ++ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n", ++ IRQ_IXP4XX_TIMER2); ++ ++ return -EIO; ++ } ++ ++ input_register_device(&nslu2_spkr_dev); ++ ++ /* do a little beep to tell the world we are alive */ ++ if (beep_on_startup) ++ { ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440); ++ msleep(120); ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0); ++ } ++ ++ printk(KERN_INFO "NSLU2: beeper\n"); ++ return 0; ++} ++ ++static void __exit nslu2_spkr_exit(void) ++{ ++ input_unregister_device(&nslu2_spkr_dev); ++ ++ disable_irq(IRQ_IXP4XX_TIMER2); ++ ++ /* turn it off */ ++ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0); ++ ++ free_irq(IRQ_IXP4XX_TIMER2, NULL); ++} ++ ++module_init(nslu2_spkr_init); ++module_exit(nslu2_spkr_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo "); ++MODULE_DESCRIPTION("NSLU2 Beeper driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch new file mode 100644 index 0000000000..7497409e77 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/75-nslu2-leds.patch @@ -0,0 +1,272 @@ + arch/arm/Kconfig | 8 - + arch/arm/mach-ixp4xx/Makefile | 4 + arch/arm/mach-ixp4xx/nslu2-leds.c | 223 ++++++++++++++++++++++++++++++++++++++ + 3 files changed, 232 insertions(+), 3 deletions(-) + +--- linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -418,7 +418,8 @@ config LEDS + ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ + ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ +- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE ++ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ++ MACH_NSLU2 + help + If you say Y here, the LEDs on your machine will be used + to provide useful information about your current system status. +@@ -432,7 +433,7 @@ config LEDS + + config LEDS_TIMER + bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ +- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2 + depends on LEDS + default y if ARCH_EBSA110 + help +@@ -448,7 +449,8 @@ config LEDS_TIMER + + config LEDS_CPU + bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ +- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \ ++ || MACH_NSLU2 + depends on LEDS + help + If you say Y here, the red LED will be used to give a good real +--- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote- + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o + obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o + ++leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o ++obj-$(CONFIG_LEDS) += $(leds-y) ++ ++ +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,223 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-leds.c ++ * ++ * NSLU2 LEDs driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * and arch/arm/mach-footbridge/netwinder-leds.c ++ * Copyright (C) 1998-1999 Russell King ++ * ++ * Author: Alessandro Zummo ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#define LED_STATE_ENABLED 0x01 ++#define LED_STATE_CLAIMED 0x02 ++#define LED_STATE_IDLE 0x04 ++ ++static unsigned char led_state; ++static unsigned int hw_led_state; ++ ++#ifdef CONFIG_LEDS_TIMER ++static const unsigned long idle_seq[4] = { ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM, 0, ++}; ++ ++static const unsigned long busy_seq[4] = { ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0, ++}; ++#endif ++ ++static unsigned char led_count = 0; ++ ++static DEFINE_SPINLOCK(leds_lock); ++extern spinlock_t gpio_lock; ++ ++static void nslu2_leds_event(led_event_t evt) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&leds_lock, flags); ++ ++ switch (evt) { ++ case led_start: ++ /* Let's rock! Red led on, all others off. Remember ++ * that disk1/disk2 works inverted. ++ */ ++ led_state = LED_STATE_ENABLED; ++ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM ++ | NSLU2_LED_RED_BM; ++ break; ++ ++ case led_stop: ++ led_state &= ~LED_STATE_ENABLED; ++ break; ++ ++ case led_claim: ++ /* The user claimed the interface, red and green off */ ++ led_state |= LED_STATE_CLAIMED; ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_release: ++ /* The user released the interface, preserve the last ++ * status of the leds, except red/green. ++ */ ++ led_state &= ~LED_STATE_CLAIMED; ++ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C; ++ break; ++ ++#ifdef CONFIG_LEDS_TIMER ++ case led_timer: ++ /* Pulse green led */ ++ if (!(led_state & LED_STATE_CLAIMED)) ++ { ++ /* clear red and green bits */ ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ ++ /* copy the right sequence in */ ++ if (led_state & LED_STATE_IDLE) ++ hw_led_state |= idle_seq[led_count % 4]; ++ else ++ hw_led_state |= busy_seq[led_count % 4]; ++ ++ led_count++; ++ } ++ break; ++#endif ++ ++#ifdef CONFIG_LEDS_CPU ++ case led_idle_start: ++ led_state |= LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red off */ ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++#endif ++ break; ++ ++ case led_idle_end: ++ led_state &= ~LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red on -> amber on */ ++ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM; ++#endif ++ break; ++#endif /* CONFIG_LEDS_CPU */ ++ ++ case led_halted: ++ if (!(led_state & LED_STATE_CLAIMED)) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ /* leds */ ++ ++ case led_green_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_green_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_amber_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_amber_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_red_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ case led_red_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++ break; ++ ++ default: ++ break; ++ } ++ ++ spin_unlock_irqrestore(&leds_lock, flags); ++ ++ if (led_state & LED_STATE_ENABLED) { ++ spin_lock_irqsave(&gpio_lock, flags); ++ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state; ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ } ++} ++ ++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event, ++ void *ptr) ++{ ++#ifdef CONFIG_LEDS_TIMER ++ leds_event(led_claim); ++#endif ++ leds_event(led_green_off); ++ leds_event(led_red_on); ++ ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block nslu2_leds_panic_block = { ++ .notifier_call = nslu2_leds_panic_event, ++}; ++ ++static int __init nslu2_leds_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ printk(KERN_INFO "NSLU2: leds\n"); ++ ++ /* register panic notifier */ ++ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block); ++ ++ /* enable gpio 0-3 */ ++ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT); ++ ++ leds_event = nslu2_leds_event; ++ ++ /* this will also initialize the leds to the ++ * default state. ++ */ ++ ++ leds_event(led_start); ++ ++ return 0; ++} ++ ++module_init(nslu2_leds_init); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch new file mode 100644 index 0000000000..26031f6f00 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/80-nslu2-io.patch @@ -0,0 +1,560 @@ +--- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-io.o + +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,548 @@ ++//============================================================================= ++// ++// n2-io.c version 0.1.7 ++// Author: Karen Spearel ++// please report problems/bugs directly to the address above ++// ++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per ++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk ++// ++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, ++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT ++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER ++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. ++// ++//============================================================================= ++// GPIO Function State ++// 0 Red LED Status ++// 1 Green LED Ready = 1 ++// 2 Disk 2 LED On = 0 ++// 3 Disk 1 LED On = 0 ++// 4 Buzzer ++// 5 Power Button Pressed = 1 ++// 8 Power Down Output = 1 powers down NSLU2 ++// 12 Reset Pressed = 0 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++/* Set this to 1 to output lots of debug messages. */ ++#define NSLU2_IO_DEBUG 0 ++ ++#if NSLU2_IO_DEBUG ++#define nslu2_io_debug(args) printk args ++#else ++#define nslu2_io_debug(args) ((void)0) ++#endif ++ ++#define VERSION "0.1.7" ++ ++#define NSLU2BZ_MAJOR 62 //buzzer ++#define NSLU2LM_MAJOR 126 ++ ++ ++#define NSLU2_BEEP_DUR_LONG 2000 ++#define NSLU2_BEEP_DUR_MED 400 ++#define NSLU2_BEEP_DUR_SHORT 100 ++#define NSLU2_BEEP_PITCH_HIGH 250 ++#define NSLU2_BEEP_PITCH_MED 500 ++#define NSLU2_BEEP_PITCH_LOW 1000 ++#define NSLU2_LONG_DELAY 30000 ++ ++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) ++ ++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe ++ ++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible ++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults ++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults ++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 ++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies ++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies ++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever ++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long ++ ++#define NSLU2LM_OFF _IOW('M',32,long) ++#define NSLU2LM_ON _IOW('M',33,long) ++#define NSLU2LM_BLINK _IOW('M',34,long) ++#define NSLU2LM_ALT _IOW('M',35,long) ++#define NSLU2LM_ALL_ON _IO('M',36) ++#define NSLU2LM_ALL_OFF _IO('M',37) ++ ++#define PHYS_LEDS 4 ++#define BLINK_DELAY 25 ++ ++// OR Masks to turn these LEDs ON ++ ++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 ++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 ++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 ++ ++// AND Masks to turn these LEDs OFF ++ ++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 ++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 ++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 ++ ++// AND Masks to turn these LEDs ON ++ ++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ ++// Or Masks to turn these LEDs OFF ++ ++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++ ++// EOR masks for toggling LEDs on/off ++ ++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits ++#define RS_GRN_TGL 0x00000002 ++#define RS_RED_TGL 0x00000001 ++#define DISK1_TGL 0x00000008 ++#define DISK2_TGL 0x00000004 ++ ++// The LED names for switches ++ ++#define LED_RS_RED 0 ++#define LED_RS_GRN 1 ++#define LED_DISK1 2 ++#define LED_DISK2 3 ++#define LED_ALL 4 ++ ++static unsigned long ontime = 50; ++static unsigned long offtime = 450; ++static unsigned long bz_repeatcnt = 10; ++static unsigned long tone = 1000; ++ ++static struct timer_list n2lm_rsg_timer; //rs green ++static struct timer_list n2lm_rsr_timer; //rs red ++static struct timer_list n2lm_d1_timer; //drive 1 ++static struct timer_list n2lm_d2_timer; //drive 2 ++static struct timer_list n2bz_timer; //beeper ++ ++// sysfs class ++static struct class *n2lm_class; ++ ++//================================================================================================== ++// ++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the ++// GPIO output register is xor'd with a mask corresponding to the selected led which simply ++// flips that bit. No record of what any of the other leds is doing is needed. ++// ++//================================================================================================== ++// this blinks rs green or green/yellow if rs red is on ++#ifndef CONFIG_LEDS ++static void n2lm_rsg_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout ++ add_timer(&n2lm_rsg_timer); //reinit timer ++ return; ++} ++ ++// this blinks or alternates rs red green... inited wit green on/red off ++static void n2lm_rsr_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ return; ++} ++// blinks disk 1 ++static void n2lm_d1_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ return; ++} ++// blinks disk 2 ++static void n2lm_d2_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_start(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); ++ ++ switch(led) { ++ case LED_RS_RED: ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ break; ++ ++ case LED_RS_GRN: ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsg_timer); ++ break; ++ ++ case LED_DISK1: ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ break; ++ ++ case LED_DISK2: ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ break; ++ ++ default: ++ break; ++ } ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_stop(unsigned long led) ++{ ++ switch (led) { ++ case LED_RS_RED: ++ del_timer(&n2lm_rsr_timer); ++ break; ++ case LED_RS_GRN: ++ del_timer(&n2lm_rsg_timer); ++ break; ++ case LED_DISK1: ++ del_timer(&n2lm_d1_timer); ++ break; ++ case LED_DISK2: ++ del_timer(&n2lm_d2_timer); ++ break; ++ default: ++ break; ++ } ++ return; ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_timer_stop_all(void) ++{ ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ return; ++} ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledon(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb ++ return; ++ case LED_ALL: //all green ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; ++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); ++ return; ++ } ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledoff(unsigned long led) ++{ ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 ++ return; ++ case LED_ALL: ++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); ++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); ++ } ++} ++ ++//================================================================================================== ++ ++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); ++ ++ if (led < 0 || led >= PHYS_LEDS) ++ return -EINVAL; ++ ++ switch (cmd ) { ++ case NSLU2LM_ON: ++ n2lm_timer_stop(led); ++ n2lm_ledon(led); ++ break; ++ ++ case NSLU2LM_OFF: ++ n2lm_timer_stop(led); ++ n2lm_ledoff(led); ++ break; ++ ++ case NSLU2LM_BLINK: ++ n2lm_ledon(led); ++ if (led == LED_RS_RED) ++ n2lm_rsr_timer.data = RS_RED_TGL; ++ n2lm_timer_start(led); ++ break; ++ ++ case NSLU2LM_ALT: ++ if (led == LED_RS_RED) ++ { ++ n2lm_ledon(LED_RS_GRN); ++ n2lm_ledoff(LED_RS_RED); ++ n2lm_rsr_timer.data = RS_RG_ALT; ++ n2lm_timer_start(LED_RS_RED); ++ break; ++ } else ++ return -EINVAL; ++ ++ case NSLU2LM_ALL_ON: ++ n2lm_timer_stop_all(); ++ n2lm_ledon(LED_ALL); ++ break; ++ ++ case NSLU2LM_ALL_OFF: ++ n2lm_timer_stop_all(); ++ n2lm_ledoff(LED_ALL); ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static struct file_operations n2lm_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2lm_ioctl, ++}; ++#endif ++//================================================================================================== ++// We can't do anything fancy here since the system tick rate is far below that required to ++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until ++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing ++// important should be haprepening. ++//================================================================================================== ++ ++static void n2_buzz(int tone_delay, int duration) ++{ ++ int i; ++ ++ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM; ++ ++ for (i = 1; i < duration; i++) { ++ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM; ++ udelay(tone_delay); ++ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM; ++ udelay(tone_delay); ++ } ++ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM; ++ ++ return; ++} ++//================================================================================================= ++ ++// this handles the buzzer duty cycle ++static void n2bz_handler(unsigned long data) ++{ ++ if (--bz_repeatcnt > 0) { //if just one beep left to do ++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout ++ add_timer(&n2bz_timer); //reinit timer ++ } ++ n2_buzz(tone/2, ontime); ++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); ++ return; ++} ++ ++//================================================================================================== ++ ++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) ++{ ++ switch (cmd) { ++ case NSLU2BZ_BEEP: ++ n2_buzz(tone/2, ontime); ++ break; ++ ++ case NSLU2BZ_BEEP_STOP: ++ del_timer(&n2bz_timer); ++ break; ++ ++ case NSLU2BZ_BEEPS: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ n2bz_handler(0); ++ break; ++ ++ case NSLU2BZ_TONESET: ++ if (param >= 250 && param <= 2000) ++ tone = param; ++ break; ++ ++ case NSLU2BZ_ONTIME: ++ if (param > 4 && param < 201) ++ ontime = param; ++ break; ++ ++ case NSLU2BZ_SILENTTIME: ++ if (param > ontime) //enforce a reasonable duty cycle ++ offtime = param; ++ else ++ offtime = ontime; ++ break; ++ ++ case NSLU2BZ_REPEATCNT: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ break; ++ ++ case NSLU2BZ_COMBINED: ++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 ++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies ++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies ++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 ++ break; ++ ++ default: ++ break; ++ } ++ return 0; ++} ++ ++static struct file_operations n2bz_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2bz_ioctl, ++}; ++ ++static void n2iom_initarch(void) ++{ ++#ifndef CONFIG_LEDS ++ init_timer(&n2lm_rsg_timer); ++ init_timer(&n2lm_rsr_timer); ++ init_timer(&n2lm_d1_timer); ++ init_timer(&n2lm_d2_timer); ++ ++ n2lm_rsr_timer.function = n2lm_rsr_handler; ++ n2lm_rsg_timer.function = n2lm_rsg_handler; ++ n2lm_d2_timer.function = n2lm_d2_handler; ++ n2lm_d1_timer.function = n2lm_d1_handler; ++#endif ++ ++ init_timer(&n2bz_timer); ++ n2bz_timer.function = n2bz_handler; ++ ++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; ++ ++#ifndef CONFIG_LEDS ++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 ++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds ++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; ++ n2lm_ledon(LED_ALL); ++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT); ++ n2lm_ledoff(LED_ALL); ++ ++ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit ++ n2lm_ledon(LED_RS_RED); ++#endif ++ ++ return; ++} ++ ++//================================================================================================== ++ ++static int __init n2iom_init(void) ++{ ++ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION); ++ ++ n2iom_initarch(); ++ ++ n2lm_class = class_create(THIS_MODULE, "nslu2"); ++ ++#ifndef CONFIG_LEDS ++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) { ++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ } ++#endif ++ ++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) { ++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ } ++ ++ return 0; ++} ++ ++//================================================================================================== ++ ++static void __exit n2iom_exit(void) ++{ ++ ++#ifndef CONFIG_LEDS ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ ++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" ); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0)); ++#endif ++ ++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz"); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0)); ++ ++ class_destroy(n2lm_class); ++} ++ ++module_init(n2iom_init); ++module_exit(n2iom_exit); ++ ++MODULE_AUTHOR("Karen Spearel "); ++MODULE_DESCRIPTION("NSLU2 I/O driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/85-timer.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/85-timer.patch new file mode 100644 index 0000000000..3d4a03f616 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/85-timer.patch @@ -0,0 +1,285 @@ +--- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000 +@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void) + * IXP4xx timer tick + * We use OS timer1 on the CPU for the timer tick and the timestamp + * counter as a source of real clock ticks to account for missed jiffies. ++ * ++ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second, ++ * this is significantly greater than the actual number on any ixp4xx ++ * board. Neither this nor 'LATCH' are required by this code because ++ * the only requirement is to generate HZ timer_tick calls per second. + *************************************************************************/ ++#if TICK_NSEC * HZ != 1000000000 ++ /* This will cause the jiffies to drift unnecessarily. */ ++# error CLOCK_TICK_RATE should be a multiple of HZ for this code ++#endif ++ ++/* These are the control registers for the interrupt handler, they must ++ * only be read and written by the interrupt handler and by the init ++ * method (which sets them to 0). ++ */ ++static volatile u32 last_timer_time; ++static volatile int accumulated_error; ++ ++/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset ++ * this from the board level code if required. The following variables ++ * must be *written* only by set_board_tick_rate ++ */ ++static u32 board_tick_rate; ++static u32 board_tick_per_1000; /* board_tick_rate/1000 */ ++static u32 timer_count; ++ ++/* The following symbol may be written to change the current tick rate, ++ * it is read by the interrupt handler and used to reload the timer. ++ * The 'real' value (the one in use) is 'board_tick_rate' above. ++ * NOTE: this can be tweaked to match the actual crystal on a particular ++ * machine. ++ */ ++volatile u32 ixp4xx_board_tick_rate = 66666600; ++EXPORT_SYMBOL(ixp4xx_board_tick_rate); ++ ++/* The set API may run asynchronously in the presence of interrupts, ++ * everything it does it is both atomic and complete (notice that it ++ * doesn't change any of the 'volatile' values). The mathematics in ++ * here require the following values. Changing the board tick rate ++ * implies an unknown error in the current timestamp tick count. ++ */ ++#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1 ++# error unexpected value for timer reload mask ++#endif ++static void set_board_tick_rate(u32 rate) { ++ u32 reload; ++ ++ /* Store the two effectively informational rate values, the ++ * error calculation is (rate - count*HZ) (above), and rate ++ * is changed first, this can cause a temporary error which ++ * will be corrected on the next interrupt. ++ */ ++ board_tick_rate = rate; ++ board_tick_per_1000 = (rate+500)/1000; ++ ++ /* Calculate the correct value to load into the timer countdown ++ * register, the low two bits must be b01 (to enable the timer). ++ * Select the top bits to be as close to the desired value as ++ * possible. ++ * ++ * First find the best value, regardless of the low two bits - ++ * this is the value used in the interrupt calculation even though ++ * it cannot necessarily be set into the register. ++ */ ++ timer_count = (rate + (HZ/2))/HZ; ++ ++ /* Now the timer_ticks are being generated at this rate, calculate ++ * an appropriate value for the register. This stores a 30 bit ++ * value which gives a period of 4*x+1, we want: ++ * ++ * 4*x+1 = board_tick_rate/HZ ++ * ++ * This needs to be rounded to the closest 4*HZ value: ++ * ++ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ ++ * x = (board_tick_rate+HZ) / (4*HZ); ++ */ ++ reload = (board_tick_rate + HZ) / HZ; ++ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ *IXP4XX_OSRT1 = reload; + +-static unsigned volatile last_jiffy_time; ++ /* If the clock is drifing, look in syslog: */ ++ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload); ++} + +-#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) ++/* This returns the time in timer ticks since the 'last_timer_time' ++ * recorded above. Use this to avoid arithmetic errors because of ++ * the overflow when the timer wraps. ++ */ ++static inline u32 ixp4xx_timer_delta(void) ++{ ++ return *IXP4XX_OSTS - last_timer_time; ++} + + /* IRQs are disabled before entering here from do_gettimeofday() */ + static unsigned long ixp4xx_gettimeoffset(void) + { +- u32 elapsed; +- +- elapsed = *IXP4XX_OSTS - last_jiffy_time; ++ /* Return the offset of the current time from the last time ++ * timer tick in microseconds. This is only used for the ++ * gettimeofday call. ++ * ++ * The result of this API is at most about 20000 (for a 50Hz ++ * HZ - 20000 uS/tick), the input delta is at most about ++ * 1.3M - 21 bits. ++ */ ++ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */ ++ /* return delta * 1000000 / board_tick_rate; */ ++ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000; ++} + +- return elapsed / CLOCK_TICKS_PER_USEC; ++/* This is the correct adjustment to the counter to compensate for an ++ * error iff timer_count-1 <= exact_count <= timer_count+1 ++ */ ++static inline int adjustment(int error) { ++ if (error >= HZ) ++ return 1; ++ else if (error <= -HZ) ++ return -1; ++ return 0; + } + + static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) + { ++ u32 rate; ++ u32 count; ++ int error; ++ + write_seqlock(&xtime_lock); + + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + ++ /* If the board tick rate has been changed update the cached ++ * value. ++ */ ++ if (ixp4xx_board_tick_rate != board_tick_rate) { ++ set_board_tick_rate(ixp4xx_board_tick_rate); ++ accumulated_error = 0; ++ } ++ + /* + * Catch up with the real idea of time ++ * ++ * board_tick_rate: actual ixp4xx ticks/second, read-only ++ * accumulated_error: aggregate error/tick * HZ, read/write ++ * timer_count: best ixp4xx ticks per timer_tick, read-only + */ +- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) { ++ rate = board_tick_rate; ++ error = accumulated_error; ++ count = timer_count; ++ do { ++ u32 adjusted_count = count + adjustment(error); ++ if (ixp4xx_timer_delta() < adjusted_count) ++ break; + timer_tick(regs); +- last_jiffy_time += LATCH; +- } ++ last_timer_time += adjusted_count; ++ error += rate - adjusted_count*HZ; ++ } while (1); ++ accumulated_error = error; + + write_sequnlock(&xtime_lock); + +@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq + .handler = ixp4xx_timer_interrupt, + }; + ++u32 ixp4xx_get_board_tick_rate(void) { ++ return board_tick_rate; ++} ++ ++EXPORT_SYMBOL(ixp4xx_get_board_tick_rate); ++ ++void ixp4xx_set_board_tick_rate(u32 rate) { ++ ixp4xx_board_tick_rate = rate; ++} ++ ++EXPORT_SYMBOL(ixp4xx_set_board_tick_rate); ++ + static void __init ixp4xx_timer_init(void) + { + /* Clear Pending Interrupt by writing '1' to it */ + *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; + + /* Setup the Timer counter value */ +- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ set_board_tick_rate(ixp4xx_board_tick_rate); + + /* Reset time-stamp counter */ + *IXP4XX_OSTS = 0; +- last_jiffy_time = 0; ++ last_timer_time = 0; ++ accumulated_error = 0; + + /* Connect the interrupt handler and enable the interrupt */ + setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); +@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void) + ARRAY_SIZE(ixp46x_devices)); + } + } +- +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -119,6 +119,11 @@ static void nslu2_power_off(void) + + static void __init nslu2_init(void) + { ++ /* The NSLU2 has a 33MHz crystal on board - 1.01% different ++ * from the typical value. ++ */ ++ ixp4xx_set_board_tick_rate(66000000); ++ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; +--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 +@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input + } + + if (value > 20 && value < 32767) +- count = (NSLU2_FREQ / (value*4)) - 1; ++ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1; + + spin_lock_irqsave(&beep_lock, flags); + +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000 +@@ -38,11 +38,6 @@ + #define NSLU2_PCI_INTD_PIN 8 + + +-/* NSLU2 Timer */ +-#define NSLU2_FREQ 66000000 +-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) +- + /* GPIO */ + + #define NSLU2_GPIO0 0 +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 +@@ -6,10 +6,23 @@ + #include + + /* +- * We use IXP425 General purpose timer for our timer needs, it runs at +- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the +- * timer register ignores the bottom 2 bits of the LATCH value. ++ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and ++ * is the number of internal counts per timer interrupt. Thus ++ * CLOCK_TICK_RATE is LATCH*HZ. ++ * ++ * The actual values of these numbers do not matter, because they ++ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed ++ * point number), so the value here gives a LATCH of 1 and pretty ++ * much guarantees to flush out any off-by-one errors. ++ * ++ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of ++ * HZ, this is checked in the ixp4xx/common.c code. + */ +-#define FREQ 66666666 +-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) ++#define CLOCK_TICK_RATE HZ + ++/* The following allow the exact board tick rate to be set and ++ * discovered. The value should be exactly twice the frequency ++ * (in Hz) of the onboard crystal. ++ */ ++extern u32 ixp4xx_get_board_tick_rate(void); ++extern void ixp4xx_set_board_tick_rate(u32 new_rate); diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/defconfig b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/defconfig new file mode 100644 index 0000000000..9f7bf76471 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/defconfig @@ -0,0 +1,1617 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15 +# Mon Nov 14 10:44:43 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +CONFIG_MACH_NSLU2=y +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f noirqdebug console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_PHYSDEV=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=m +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MACLIST=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_NSLU2_BEEPER=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +CONFIG_VIDEO_BT848=m +# CONFIG_VIDEO_SAA6588 is not set +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_TUNER_3036=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_SAA7134=m +# CONFIG_VIDEO_SAA7134_ALSA is not set +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_DPC=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_OVCAMCHIP=m +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_VIDEO_VIDEOBUF=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_BUF=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_PWC=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_CLASS=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers +# +CONFIG_RTC_DRV_X1205=y +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_NATIVE_ENDIAN is not set +CONFIG_JFFS2_BIG_ENDIAN=y +# CONFIG_JFFS2_LITTLE_ENDIAN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/2.6/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/40-scsi-idle.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/40-scsi-idle.patch new file mode 100644 index 0000000000..e04996e2a8 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/40-scsi-idle.patch @@ -0,0 +1,44 @@ +diff -ur linux-2.6.12.2/drivers/scsi/sd.c linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c +--- linux-2.6.12.2/drivers/scsi/sd.c 2005-08-27 06:12:31.000000000 +0200 ++++ linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c 2005-08-27 06:26:50.000000000 +0200 +@@ -266,6 +266,9 @@ + "count=%d\n", disk->disk_name, + (unsigned long long)block, this_count)); + ++ /* Update idle-since time */ ++ sdp->idle = jiffies; ++ + if (!sdp || !scsi_device_online(sdp) || + block + rq->nr_sectors > get_capacity(disk)) { + SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n", +@@ -600,6 +603,8 @@ + case SCSI_IOCTL_GET_IDLUN: + case SCSI_IOCTL_GET_BUS_NUMBER: + return scsi_ioctl(sdp, cmd, p); ++ case SCSI_IOCTL_IDLE: ++ return (jiffies - sdp->idle) / HZ + 1; + default: + error = scsi_cmd_ioctl(filp, disk, cmd, p); + if (error != -ENOTTY) +diff -ur linux-2.6.12.2/include/scsi/scsi_device.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h +--- linux-2.6.12.2/include/scsi/scsi_device.h 2005-08-27 06:12:44.000000000 +0200 ++++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h 2005-08-27 06:27:09.000000000 +0200 +@@ -125,6 +125,7 @@ + atomic_t ioerr_cnt; + + int timeout; ++ unsigned long idle; /* scsi idle time in jiffers */ + + struct device sdev_gendev; + struct class_device sdev_classdev; +diff -ur linux-2.6.12.2/include/scsi/scsi_ioctl.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h +--- linux-2.6.12.2/include/scsi/scsi_ioctl.h 2005-08-27 06:12:44.000000000 +0200 ++++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h 2005-08-28 17:32:17.000000000 +0200 +@@ -7,6 +7,7 @@ + #define SCSI_IOCTL_SYNC 4 /* Request synchronous parameters */ + #define SCSI_IOCTL_START_UNIT 5 + #define SCSI_IOCTL_STOP_UNIT 6 ++#define SCSI_IOCTL_IDLE 4746 /* get idle time in jiffies */ + /* The door lock/unlock constants are compatible with Sun constants for + the cdrom */ + #define SCSI_IOCTL_DOORLOCK 0x5380 /* lock the eject mechanism */ diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/91-maclist.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/91-maclist.patch new file mode 100644 index 0000000000..27af1ea639 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/91-maclist.patch @@ -0,0 +1,377 @@ +--- linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,23 @@ ++#ifndef _MACLIST_H ++#define _MACLIST_H 1 ++/* ++ * Interfaces to the MAC repository ++ */ ++/* ++ * Add a single entry, returns 0 on success else an error ++ * code. Must *not* be called from an interrupt handler. ++ */ ++extern int maclist_add(const u8 id_to_add[6]); ++ ++/* ++ * Return the current entry count (valid in any context). ++ */ ++extern int maclist_count(void); ++ ++/* ++ * Return the ID from the n'th entry (valid in any context), ++ * returns 0 on success, -EINVAL if 'n' is out of range. ++ */ ++extern int maclist_read(u8 (*buffer_for_id)[6], int index_of_id_to_return); ++ ++#endif /*_MACLIST_H*/ +--- linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,314 @@ ++/* ++ * drivers/net/maclist.c ++ * ++ * a simple driver to remember ethernet MAC values ++ * ++ * Some Ethernet hardware implementations have no built-in ++ * storage for allocated MAC values - an example is the Intel ++ * IXP420 chip which has support for Ethernet but no defined ++ * way of storing allocated MAC values. With such hardware ++ * different board level implementations store the allocated ++ * MAC (or MACs) in different ways. Rather than put board ++ * level code into a specific Ethernet driver this driver ++ * provides a generally accessible repository for the MACs ++ * which can be written by board level code and read by the ++ * driver. ++ * ++ * The implementation also allows user level programs to ++ * access the MAC information in /proc/net/maclist. This is ++ * useful as it allows user space code to use the MAC if it ++ * is not used by a built-in driver. ++ * ++ * Copyright (C) 2005 John Bowler ++ * Author: John Bowler ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * External interfaces: ++ * Interfaces to linux kernel (and modules) ++ * maclist_add: add a single MAC ++ * maclist_count: total number of MACs stored ++ * maclist_read: read a MAC 0..(maclist_count-1) ++ */ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define MACLIST_NAME "maclist" ++ ++MODULE_AUTHOR("John Bowler "); ++MODULE_DESCRIPTION("MAC list repository"); ++MODULE_LICENSE("GPL"); ++ ++typedef struct maclist_entry { ++ struct maclist_entry *next; /* Linked list, first first */ ++ u8 id[6]; /* 6 byte Ethernet MAC */ ++} maclist_entry_t; ++ ++/* Access to this list is possible at any time - entries in ++ * the list are never destroyed. Modification of the list is ++ * safe only from the init code (i.e. modification must be ++ * single threaded), but read from an interrupt at the same ++ * time is possible and safe. ++ */ ++static maclist_entry_t *maclist_list = 0; ++ ++/* ++ * External interfaces. ++ * ++ * Add a single entry, returns 0 on success else an error ++ * code. Must be single threaded. ++ */ ++int maclist_add(const u8 new_id[6]) { ++ maclist_entry_t *new_entry, **tail; ++ ++ if (new_id == 0 || !is_valid_ether_addr(new_id)) { ++ printk(KERN_ERR MACLIST_NAME ": invalid ethernet address\n"); ++ return -EINVAL; ++ } ++ new_entry = kmalloc(sizeof *new_entry, GFP_KERNEL); ++ if (new_entry == 0) ++ return -ENOMEM; ++ new_entry->next = 0; ++ memcpy(new_entry->id, new_id, sizeof new_entry->id); ++ ++ tail = &maclist_list; ++ while (*tail != 0) ++ tail = &(*tail)->next; ++ *tail = new_entry; ++ return 0; ++} ++EXPORT_SYMBOL(maclist_add); ++ ++/* ++ * Return the current entry count (valid in any context). ++ */ ++int maclist_count(void) { ++ maclist_entry_t *tail = maclist_list; ++ int count = 0; ++ ++ while (tail != 0) { ++ tail = tail->next; ++ ++count; ++ } ++ ++ return count; ++} ++EXPORT_SYMBOL(maclist_count); ++ ++/* ++ * Return the ID from the n'th entry (valid in any context), ++ * returns 0 on success, -EINVAL if 'n' is out of range. ++ */ ++int maclist_read(u8 (*id)[6], int n) { ++ maclist_entry_t *entry = maclist_list; ++ ++ while (n > 0 && entry != 0) { ++ --n; ++ entry = entry->next; ++ } ++ ++ if (n == 0 && entry != 0) { ++ memcpy(id, entry->id, sizeof *id); ++ return 0; ++ } ++ ++ printk(KERN_ERR MACLIST_NAME ": id does not exist\n"); ++ return -EINVAL; ++} ++EXPORT_SYMBOL(maclist_read); ++ ++/* ++ * Parameter parsing. The option string is a list of MAC ++ * addresses, comma separated. (The parsing really should ++ * be somewhere central...) ++ */ ++static int __init maclist_setup(char *param) { ++ int bytes = 0, seen_a_digit = 0; ++ u8 id[6]; ++ ++ memset(id, 0, sizeof id); ++ ++ if (param) do { ++ int digit = -1; ++ switch (*param) { ++ case '0': digit = 0; break; ++ case '1': digit = 1; break; ++ case '2': digit = 2; break; ++ case '3': digit = 3; break; ++ case '4': digit = 4; break; ++ case '5': digit = 5; break; ++ case '6': digit = 6; break; ++ case '7': digit = 7; break; ++ case '8': digit = 8; break; ++ case '9': digit = 9; break; ++ case 'a': case 'A': digit = 10; break; ++ case 'b': case 'B': digit = 11; break; ++ case 'c': case 'C': digit = 12; break; ++ case 'd': case 'D': digit = 13; break; ++ case 'e': case 'E': digit = 14; break; ++ case 'f': case 'F': digit = 15; break; ++ case ':': ++ if (seen_a_digit) ++ bytes = (bytes+1) & ~1; ++ else ++ bytes += 2; /* i.e. ff::ff is ff:00:ff */ ++ seen_a_digit = 0; ++ break; ++ case 0: ++ if (bytes == 0) /* nothing new seen so far */ ++ return 0; ++ /*fall through*/ ++ case ',': case ';': ++ if (bytes > 0) ++ bytes = 12; /* i.e. all trailing bytes 0 */ ++ break; ++ default: ++ printk(KERN_ERR MACLIST_NAME ": invalid character <%c[%d]>\n", ++ *param, *param); ++ return -EINVAL; ++ } ++ ++ if (digit >= 0) { ++ id[bytes>>1] = (id[bytes>>1] << 4) + digit; break; ++ ++bytes; ++ seen_a_digit = 1; ++ } ++ ++ if (bytes >= 12) { ++ int rc = maclist_add(id); ++ if (rc) ++ return rc; ++ bytes = 0; ++ seen_a_digit = 0; ++ memset(id, 0, sizeof id); ++ if (*param == 0) ++ return 0; ++ } ++ ++param; ++ } while (1); ++ ++ return 0; ++} ++ ++/* ++ * procfs support, if compiled in. ++ */ ++#ifdef CONFIG_PROC_FS ++/* ++ * Character device read ++ */ ++static int maclist_getchar(off_t n) { ++ static char xdigit[16] = "0123456789abcdef"; ++ maclist_entry_t *head = maclist_list; ++ int b; ++ ++ do { ++ if (head == 0) ++ return -1; ++ if (n < 18) ++ break; ++ head = head->next; ++ n -= 18; ++ } while (1); ++ ++ if (n == 17) ++ return '\n'; ++ ++ b = n/3; ++ switch (n - b*3) { ++ case 0: return xdigit[head->id[b] >> 4]; ++ case 1: return xdigit[head->id[b] & 0xf]; ++ default: return ':'; ++ } ++} ++ ++/* ++ * The extensively undocumented proc_read_t callback is implemented here. ++ * Go look in fs/proc/generic.c: ++ * ++ * Prototype: ++ * int f(char *buffer, char **start, off_t offset, ++ * int count, int *peof, void *dat) ++ * ++ * Assume that the buffer is "count" bytes in size. ++ * ++ * 2) Set *start = an address within the buffer. ++ * Put the data of the requested offset at *start. ++ * Return the number of bytes of data placed there. ++ * If this number is greater than zero and you ++ * didn't signal eof and the reader is prepared to ++ * take more data you will be called again with the ++ * requested offset advanced by the number of bytes ++ * absorbed. ++ */ ++static int maclist_proc_read(char *buffer, char **start, off_t offset, ++ int count, int *peof, void *dat) { ++ int total; ++ ++ *start = buffer; ++ total = 0; ++ ++ while (total < count) { ++ int ch = maclist_getchar(offset++); ++ if (ch == -1) { ++ *peof = 1; ++ break; ++ } ++ *buffer++ = ch; ++ ++total; ++ } ++ ++ return total; ++} ++#endif ++ ++/* ++ * Finally, the init/exit functions. ++ */ ++static void __exit maclist_exit(void) ++{ ++ maclist_entry_t *list; ++ ++ remove_proc_entry(MACLIST_NAME, proc_net); ++ ++ list = maclist_list; ++ maclist_list = 0; ++ ++ while (list != 0) { ++ maclist_entry_t *head = list; ++ list = head->next; ++ kfree(head); ++ } ++} ++ ++#ifdef MODULE ++static char ids[256]; ++module_param_string(ids, ids, sizeof ids, 0); ++MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n"); ++#else ++__setup("maclist_ids=", maclist_setup); ++#endif ++ ++static int __init maclist_init(void) ++{ ++# ifdef MODULE ++ if (ids[0]) ++ maclist_setup(ids); ++# endif ++ ++ /* Ignore failure, the module will still work. */ ++ (void)create_proc_read_entry(MACLIST_NAME, S_IRUGO, proc_net, maclist_proc_read, NULL); ++ ++ return 0; ++} ++ ++module_init(maclist_init); ++module_exit(maclist_exit); +--- linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o + # end link order section + # + ++obj-$(CONFIG_MACLIST) += maclist.o + obj-$(CONFIG_MII) += mii.o + obj-$(CONFIG_PHYLIB) += phy/ + +--- linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -166,6 +166,21 @@ config NET_ETHERNET + kernel: saying N will just cause the configurator to skip all + the questions about Ethernet network cards. If unsure, say N. + ++config MACLIST ++ tristate "Ethernet MAC repository" ++ depends on NET_ETHERNET ++ help ++ Some ethernet controllers have no built-in way of obtaining an ++ appropriate Ethernet MAC address. Such controllers have to be ++ initialised in a board-specific way, depending on how the allocated ++ MAC is stored. The MAC repository provides a set of APIs and a ++ proc entry (/proc/net/maclist) to store MAC values from the board ++ so that such drivers can obtain a MAC address without board-specific ++ code. You do not need to enable this device - it will be selected ++ automatically by any device which requires it. It is only useful ++ to enable it manually when building a device driver independently ++ of the kernel build. ++ + config MII + tristate "Generic Media Independent Interface device support" + depends on NET_ETHERNET diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch new file mode 100644 index 0000000000..c8b8a9bede --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/92-nslu2-maclist.patch @@ -0,0 +1,80 @@ +--- linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -11,8 +11,8 @@ comment "IXP4xx Platforms" + # This entry is placed on top because otherwise it would have + # been shown as a submenu. + config MACH_NSLU2 +- bool +- prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715) ++ bool "NSLU2" ++ select MACLIST + help + Say 'Y' here if you want your kernel to support Linksys's + NSLU2 NAS device. For more information on this platform, +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -16,11 +16,14 @@ + #include + #include + #include ++#include + + #include + #include + #include + ++#include ++ + static struct flash_platform_data nslu2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +@@ -112,6 +115,37 @@ static void nslu2_power_off(void) + gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); + } + ++/* ++ * When the RedBoot partition is added the MAC address is read from ++ * it. ++ */ ++void flash_add(struct mtd_info *mtd) { ++ if (strcmp(mtd->name, "RedBoot") == 0) { ++ size_t retlen; ++ u_char mac[6]; ++ ++ /* The MAC is at a known offset... */ ++ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) { ++ printk(KERN_INFO "NSLU2 MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ maclist_add(mac); ++ } else { ++ printk(KERN_ERR "NSLU2 MAC: read failed\n"); ++ } ++ } ++} ++ ++/* ++ * Nothing to do on remove at present. ++ */ ++void flash_remove(struct mtd_info *mtd) { ++} ++ ++struct mtd_notifier flash_notifier = { ++ .add = flash_add, ++ .remove = flash_remove, ++}; ++ + static void __init nslu2_init(void) + { + /* The NSLU2 has a 33MHz crystal on board - 1.01% different +@@ -119,6 +153,11 @@ static void __init nslu2_init(void) + */ + ixp4xx_set_board_tick_rate(66000000); + ++ /* The flash has an ethernet MAC embedded in it which we need, ++ * that is all this notifier does. ++ */ ++ register_mtd_user(&flash_notifier); ++ + ixp4xx_sys_init(); + + pm_power_off = nslu2_power_off; diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/compile-switches.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/compile-switches.patch new file mode 100644 index 0000000000..4b7a688313 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/compile-switches.patch @@ -0,0 +1,58 @@ +--- linux-2.6.11/arch/arm/Makefile.orig 2005-03-20 15:02:07.587138712 -0800 ++++ linux-2.6.11/arch/arm/Makefile 2005-03-20 15:10:36.546765088 -0800 +@@ -33,6 +33,12 @@ + AFLAGS += -mlittle-endian + endif + ++ifeq ($(CONFIG_ARM_THUMB_INTERWORK),y) ++CFLAGS += -mthumb-interwork ++else ++CFLAGS += -mno-thumb-interwork ++endif ++ + comma = , + + # This selects which instruction set is used. +@@ -43,6 +49,8 @@ + arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4) + arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4 + arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3 ++# The following overrides the CPU_32v5 setting if specified ++arch-$(CONFIG_ARCH_XSCALE) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=xscale,-march=armv5te) + + # This selects how we optimise for the processor. + tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610 +--- linux-2.6.11/arch/arm/mm/Kconfig.orig 2005-03-20 14:54:07.927058128 -0800 ++++ linux-2.6.11/arch/arm/mm/Kconfig 2005-03-20 15:01:26.727350344 -0800 +@@ -366,6 +366,31 @@ + + If you don't know what this all is, saying Y is a safe choice. + ++config ARM_THUMB_INTERWORK ++ bool "Support Thumb code within the kernel" ++ depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6 ++ default n ++ help ++ Say Y to compile the whole kernel with support for the interworking ++ of the 16 bit thumb instruction set and 32 bit ARM instruction set. ++ ++ You only need this if some parts of the kernel will be compiled ++ as thumb code, this is not usual. It increases the total kernel ++ size by about 3%. ++ ++config ARCH_XSCALE ++ bool "Use -march=xscale in preference to -march=armv5te" ++ depends on CPU_XSCALE ++ default y ++ help ++ Say yes to ask gcc to use the xscale architecture (instruction set) ++ in preference to armv5te. This allows gcc to use the extra xscale ++ instructions but means the code will not run on a standard (non-xscale) ++ armv5te. At present this makes no difference - gcc 3.4.3 does not ++ generate any xscale specific instructions - however gcc 3.4.3 does ++ generate slightly more optimal instructions if this is specified (this ++ is an error inside gcc 3.4.3 which should be fixed in 4.1.) ++ + config CPU_BIG_ENDIAN + bool "Build big-endian kernel" + depends on ARCH_SUPPORTS_BIG_ENDIAN diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch new file mode 100644 index 0000000000..32f7e3ccb8 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/ixp4xx-regs.patch @@ -0,0 +1,11 @@ +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 23:37:49.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-06-17 17:51:32.569981939 -0700 +@@ -52,7 +52,7 @@ + * Expansion BUS Configuration registers + */ + #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) +-#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000) ++#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) + #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) + + /* diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch new file mode 100644 index 0000000000..b5ce101d68 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/nslu2-io_rpbutton.patch @@ -0,0 +1,139 @@ +--- nslu2-io.c.old 2da1d3f5c0aa0804c5769588337077ddcb35c5e9 ++++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c e895da638b4aae16a11fafe52ae0b063645a9a12 +@@ -158,6 +158,8 @@ + #define LED_DISK2 3 + #define LED_ALL 4 + ++static int nslu2_shutdown_in_progress = 0; ++ + static unsigned long init_jiffy = 0; //jiffies at init time + static unsigned long rb_presses = 0; //number of reset button presses + static unsigned long ontime = 50; +@@ -503,40 +505,20 @@ + static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) + { + void *ret; +- +- wake_up(&n2pb_waitq); +- remove_proc_entry(PWR_OFF_STR, NULL); //no parent +- n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); +- ret = create_proc_entry(PWR_OFF_STR, 0, NULL); +- nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); +- +-// WARNING: This is RUDE...it unconditionally pulls the power plug. +-// Your data will be at risk...since this is just a test system +-// I am leaving it enabled...eventually userland needs to get the +-// message, do an orderly shutdown and use an ioctl or something in +-// /proc/powerdowm to actually have us pull the plug. +- +- machine_power_off(); +- ++ if (!nslu2_shutdown_in_progress++) { ++ wake_up(&n2pb_waitq); ++ remove_proc_entry(PWR_OFF_STR, NULL); //no parent ++ n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK" ++ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); ++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret)); ++ kill_proc(1,SIGINT,1); // Signal init to shut down ++ } else { ++ n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED); // Make a scary noise! ++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine! ++ } + return IRQ_HANDLED; + } + +-//================================================================================================== +-// +-//static void do_rb_timeout(unsigned long data) +-//{ +-// int i; +-// +-// for (i = 0; i < rb_presses; i++) +-// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); +-// return; +-//} +-// +-//================================================================================================== +-// does nothing -- waiting for userland to define +-// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so +-// we hang in a loop until the button is no longer pressed +- + struct testr { + int ctl; + long param; +@@ -544,72 +526,11 @@ + + static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) + { ++// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable + +- static struct testr test[] = { +- { N2LM_ALL_OFF,0 }, +- { N2LM_ON,0 }, +- { N2LM_OFF,0 }, +- { N2LM_ON,1 }, +- { N2LM_ALL_OFF,1 }, +- { N2LM_ON,2 }, +- { N2LM_OFF,2 }, +- { N2LM_ON,3 }, +- { N2LM_OFF,3 }, +- { N2LM_BLINK,0 }, +- { N2LM_OFF,0 }, +- { N2LM_BLINK,1 }, +- { N2LM_OFF,1 }, +- { N2LM_BLINK,2 }, +- { N2LM_OFF,2 }, +- { N2LM_BLINK,3 }, +- { N2LM_OFF,3 }, +- { N2LM_ALL_OFF,0 }, +- { N2LM_ALT,1 }, +- { N2LM_OFF,1 }, +- { N2LM_ALL_ON,0 } +- }; +- +- nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); +- + wake_up(&n2rb_waitq); +- while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) +- ; //wait for button release +- +- if (rb_presses > 20) +- rb_presses = 0; +- tone = (rb_presses * 50) + 200; +- ontime = (rb_presses*10) + 100; +- offtime = 500 - (rb_presses*20); +- nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); +- rb_presses++; +- +- n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); +- n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); +-// if (rb_presses == 0) { +-// init_jiffy = jiffies; +-// init_timer (&n2rb_timer); +-// n2rb_timer.function = do_rb_timeout; +-// }; +-// +-// if (rb_presses == 8) +-// rb_presses = 0; +-// if (rb_presses & 1) +-// n2lm_ledon(test[rb_presses]); +-// else +-// n2lm_ledoff(test[rb_presses]); +-// +-// n2rb_timer.expires = (jiffies + RB_DELAY); +-// add_timer (&n2rb_timer); +-// if (rb_presses < 5) { +-// if (rb_presses > 0) +-// n2lm_ledoff(rb_presses); +-// n2lm_ledon(++rb_presses); +-// n2lm_timer_start(rb_presses); +-// }; +- +- nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); +- return IRQ_HANDLED; +- ++ machine_power_off(); ++ return IRQ_HANDLED; // So we don't get a nobody cared error :-P + } + + //================================================================================================== diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/thumb-swi.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/thumb-swi.patch new file mode 100644 index 0000000000..2e73bb103f --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/thumb-swi.patch @@ -0,0 +1,19 @@ +# This patch changes the thumb swi handling for any thumb swi with +# an immediate value != 0, those swis are mapped into the arm +# specific swis. This implements a thumb breakpoint swi. +--- linux-2.6.12.2/arch/arm/kernel/entry-common.S.orig 2005-09-19 12:48:42.323365573 -0700 ++++ linux-2.6.12.2/arch/arm/kernel/entry-common.S 2005-09-19 13:31:19.004247358 -0700 +@@ -137,8 +137,11 @@ + */ + #ifdef CONFIG_ARM_THUMB + tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs +- addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in +- ldreq scno, [lr, #-4] ++ ldrneh ip, [lr, #-2] @ thumb swi instruction ++ ldreq scno, [lr, #-4] @ arm swi instruction ++ addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in to thumb r7 value ++ bicnes ip, ip, #0xff00 @ clear thumb swi bits ++ addne scno, ip, #__ARM_NR_BASE @ thumb swi0->r7, swi!0->arm swi + #else + ldr scno, [lr, #-4] @ get SWI instruction + #endif diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/timer.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/timer.patch new file mode 100644 index 0000000000..6279746e64 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/timer.patch @@ -0,0 +1,24 @@ +# Fix for the NSLU2 timer problem (tickadj 10101.01 when it should be 10000) +# Also contains a fix for the more generate problem on the ixp4xx in that the +# Intel spec says to use a 33.33MHz crystal, not 33.333333Mhz + +--- linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h.orig 2005-08-05 11:02:09.872690723 -0700 ++++ linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h 2005-08-05 11:45:08.786971567 -0700 +@@ -7,7 +7,14 @@ + + /* + * We use IXP425 General purpose timer for our timer needs, it runs at +- * 66.66... MHz ++ * 66.66 MHz (exactly) by the Intel specification. + */ +-#define CLOCK_TICK_RATE (66666666) +- ++#if 0 ++#define CLOCK_TICK_RATE (66660000) ++#else ++/* ++ * Unfortunately the NSLU2 has a 33MHz crystal, so the rate is not the ++ * specified one. ++ */ ++#define CLOCK_TICK_RATE (66000000) ++#endif diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6/x1205-rtc.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6/x1205-rtc.patch new file mode 100644 index 0000000000..913f44e2ae --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/2.6/x1205-rtc.patch @@ -0,0 +1,38 @@ +--- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Kconfig 2005-06-17 17:51:28.635578329 -0700 ++++ linux-2.6.11/drivers/i2c/chips/Kconfig 2005-06-17 17:51:32.565982545 -0700 +@@ -430,6 +430,15 @@ + + This driver can also be built as a module. If so, the module + will be called isp1301_omap. ++config SENSORS_X1205 ++ tristate "Xicor X1205 RTC chip" ++ depends on I2C && EXPERIMENTAL ++ select I2C_SENSOR ++ help ++ If you say yes here you get support for the Xicor x1205 RTC chip. ++ ++ This driver can also be built as a module. If so, the module ++ will be called x1205-rtc + + config SENSORS_M41T00 + tristate "ST M41T00 RTC chip" +--- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Makefile 2005-06-17 17:51:28.636578177 -0700 ++++ linux-2.6.11/drivers/i2c/chips/Makefile 2005-06-17 17:51:32.566982394 -0700 +@@ -41,6 +41,7 @@ + obj-$(CONFIG_SENSORS_VIA686A) += via686a.o + obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o ++obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o + + ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) + EXTRA_CFLAGS += -DDEBUG +--- linux-2.6.11/.pc/2.6.patch/include/linux/i2c-id.h 2005-06-17 17:51:31.358165630 -0700 ++++ linux-2.6.11/include/linux/i2c-id.h 2005-06-17 17:51:32.569981939 -0700 +@@ -108,6 +108,7 @@ + #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */ + #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */ + #define I2C_DRIVERID_SAA7114H 64 /* video decoder */ ++#define I2C_DRIVERID_X1205 0xF0 + + + #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */ diff --git a/packages/obsolete/nslu2/nslu2-kernel/files/.mtn2git_empty b/packages/obsolete/nslu2/nslu2-kernel/files/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 diff --git a/packages/obsolete/nslu2/nslu2-kernel/files/anonymiser.patch b/packages/obsolete/nslu2/nslu2-kernel/files/anonymiser.patch new file mode 100644 index 0000000000..3384b15fe2 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel/files/anonymiser.patch @@ -0,0 +1,22 @@ +--- linux-2.6.11.2/scripts/mkcompile_h.orig 2005-05-07 05:27:02.440000000 +0000 ++++ linux-2.6.11.2/scripts/mkcompile_h 2005-05-07 05:28:30.360000000 +0000 +@@ -43,16 +43,9 @@ + echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\" + + echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\" +- echo \#define LINUX_COMPILE_BY \"`whoami`\" +- echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\" +- +- if [ -x /bin/dnsdomainname ]; then +- echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\" +- elif [ -x /bin/domainname ]; then +- echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\" +- else +- echo \#define LINUX_COMPILE_DOMAIN +- fi ++ echo \#define LINUX_COMPILE_BY \"openslug\" ++ echo \#define LINUX_COMPILE_HOST \"openslug.org\" ++ echo \#define LINUX_COMPILE_DOMAIN \"openslug.org\" + + echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\" + ) > .tmpcompile diff --git a/packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb b/packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb new file mode 100644 index 0000000000..dff6b0e4b0 --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel_2.6.14-mm1.bb @@ -0,0 +1,38 @@ +# Kernel for NSLU2 +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r1.${PR_CONFIG}" + +require nslu2-kernel.inc + +# N2K_PATCHES - full list of patches to apply +N2K_PATCHES = "\ + file://00-memory-h-page-shift.patch;patch=1 \ + file://90-ixp4xx-pci-le.patch;patch=1 \ + file://18-ixp4xx-io-h-addr.patch;patch=1 \ + file://19-jffs2-force-be.patch;patch=1 \ + file://20-timer.patch;patch=1 \ + file://29-ipv4-route-c-spinlock.patch;patch=1 \ + file://30-i2c-x1205-mm1.patch;patch=1 \ + file://50-nslu2-arch.patch;patch=1 \ + file://55-nslu2-rtc.patch;patch=1 \ + file://60-nslu2-beeper.patch;patch=1 \ + file://70-nslu2-io.patch;patch=1 \ + file://75-nslu2-leds.patch;patch=1 \ + file://80-nslu2-class-device-create.patch;patch=1 \ + file://90-pegasus.patch;patch=1 \ + file://anonymiser.patch;patch=1 \ +" + +# These options get added to the kernel command line, only put things +# specific to the bootstrap of *this* kernel in here - DISTRO specfic +# config must be in CMDLINE_ROOT (see the full definition of CMDLINE +# in nslu2-kernel.inc) +CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1" diff --git a/packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb b/packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb new file mode 100644 index 0000000000..b7790be8be --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel_2.6.14.5.bb @@ -0,0 +1,42 @@ +# Kernel for NSLU2 +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r0.${PR_CONFIG}" + +require nslu2-kernel.inc + +# N2K_PATCHES - full list of patches to apply +N2K_PATCHES = "\ + file://90-ixp4xx-pci-le.patch;patch=1 \ + file://10-ixp4xx-copy-from.patch;patch=1 \ + file://10-ixp4xx-le.patch;patch=1 \ + file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ + file://15-ixp4xx-writesb-l-w.patch;patch=1 \ + file://18-ixp4xx-io-h-addr.patch;patch=1 \ + file://19-jffs2-force-be.patch;patch=1 \ + file://29-ipv4-route-c-spinlock.patch;patch=1 \ + file://30-i2c-x1205.patch;patch=1 \ + file://50-nslu2-arch.patch;patch=1 \ + file://55-nslu2-rtc.patch;patch=1 \ + file://60-nslu2-beeper.patch;patch=1 \ + file://70-nslu2-io.patch;patch=1 \ + file://75-nslu2-leds.patch;patch=1 \ + file://90-pegasus.patch;patch=1 \ + file://20-timer.patch;patch=1 \ + file://91-maclist.patch;patch=1 \ + file://92-nslu2-maclist.patch;patch=1 \ + file://anonymiser.patch;patch=1 \ +" + +# These options get added to the kernel command line, only put things +# specific to the bootstrap of *this* kernel in here - DISTRO specfic +# config must be in CMDLINE_ROOT (see the full definition of CMDLINE +# in nslu2-kernel.inc) +CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1" diff --git a/packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb b/packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb new file mode 100644 index 0000000000..68b2b56f1a --- /dev/null +++ b/packages/obsolete/nslu2/nslu2-kernel_2.6.15.bb @@ -0,0 +1,35 @@ +# Kernel for NSLU2 +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r3.${PR_CONFIG}" + +require nslu2-kernel.inc + +# N2K_PATCHES - full list of patches to apply +N2K_PATCHES = "\ + file://00-memory-h-page-shift.patch;patch=1 \ + file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ + file://15-jffs2-endian-config.patch;patch=1 \ + file://40-rtc-class.patch;patch=1 \ + file://40-scsi-idle.patch;patch=1 \ + file://60-nslu2-beeper.patch;patch=1 \ + file://75-nslu2-leds.patch;patch=1 \ + file://80-nslu2-io.patch;patch=1 \ + file://85-timer.patch;patch=1 \ + file://91-maclist.patch;patch=1 \ + file://92-nslu2-maclist.patch;patch=1 \ + file://anonymiser.patch;patch=1 \ +" + +# These options get added to the kernel command line, only put things +# specific to the bootstrap of *this* kernel in here - DISTRO specfic +# config must be in CMDLINE_ROOT (see the full definition of CMDLINE +# in nslu2-kernel.inc) +CMDLINE_KERNEL_OPTIONS = "rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f" -- cgit v1.2.3