From 1ac533c201e77fa9e6dbe6f686bc33aa086b8302 Mon Sep 17 00:00:00 2001
From: Richard Purdie <rpurdie@rpsys.net>
Date: Fri, 12 Aug 2005 11:24:03 +0000
Subject: linux-oz-2.6: Update Spitz defconfig

---
 .../defconfig-spitz                                | 403 +++++++++++++--------
 1 file changed, 249 insertions(+), 154 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/linux-openzaurus-2.6.13-rc5-mm1/defconfig-spitz b/packages/linux/linux-openzaurus-2.6.13-rc5-mm1/defconfig-spitz
index ed5010d5c8..02437440c5 100644
--- a/packages/linux/linux-openzaurus-2.6.13-rc5-mm1/defconfig-spitz
+++ b/packages/linux/linux-openzaurus-2.6.13-rc5-mm1/defconfig-spitz
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc3-mm2
-# Wed May 11 22:20:58 2005
+# Linux kernel version: 2.6.13-rc5-mm1
+# Fri Aug 12 08:40:57 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -23,7 +22,6 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -87,6 +85,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # Intel PXA2xx Implementations
@@ -95,12 +94,13 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_POODLE is not set
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_PXA_SHARPSL_25x is not set
+CONFIG_PXA_SHARPSL_27x=y
 CONFIG_MACH_SPITZ=y
+# CONFIG_MACH_AKITA is not set
 CONFIG_PXA27x=y
+# CONFIG_PXA_KEYS is not set
 
 #
 # Processor Type
@@ -111,7 +111,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -124,6 +123,7 @@ CONFIG_SHARP_SCOOP=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -143,11 +143,16 @@ CONFIG_PCMCIA_PXA2XX=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -155,7 +160,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   "
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug "
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -183,6 +188,139 @@ CONFIG_BINFMT_ELF=y
 CONFIG_PM=y
 CONFIG_APM=y
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_BCSP_TXCRC=y
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_IEEE80211 is not set
+
 #
 # Device Drivers
 #
@@ -349,143 +487,18 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
+# Network device support
 #
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VIA_FIR is not set
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_BCSP_TXCRC=y
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_IEEE80211 is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 
+#
+# PHY device support
+#
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -521,6 +534,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_KGDBOE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -545,10 +563,22 @@ CONFIG_INPUT_POWER=y
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -560,7 +590,9 @@ CONFIG_INPUT_POWER=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -595,7 +627,6 @@ CONFIG_SA1100_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -611,11 +642,23 @@ CONFIG_SA1100_RTC=y
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
 #
 
+#
+# SoC drivers
+#
+# CONFIG_SOC is not set
+
 #
 # Multimedia devices
 #
@@ -629,7 +672,54 @@ CONFIG_SA1100_RTC=y
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_ELPP is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
 
 #
 # Sound
@@ -651,7 +741,12 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # MMC/SD Card support
 #
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BULKTRANSFER is not set
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
 
 #
 # File systems
@@ -660,8 +755,11 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISER4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -679,11 +777,6 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
 # CONFIG_FUSE_FS is not set
 
 #
@@ -707,12 +800,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 # CONFIG_RELAYFS_FS is not set
 
 #
@@ -720,6 +813,7 @@ CONFIG_RAMFS=y
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ASFS_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -766,6 +860,7 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
-- 
cgit v1.2.3


From 24172a4205a5cd2e9105a6f328a170a45f4866e6 Mon Sep 17 00:00:00 2001
From: Richard Purdie <rpurdie@rpsys.net>
Date: Fri, 12 Aug 2005 11:25:14 +0000
Subject: linux-oz-2.6: Add keyboard, touchscreen and MMC drivers for spitz

---
 packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb b/packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb
index 1ab1eecffa..fd6dd9ee37 100644
--- a/packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb
+++ b/packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb
@@ -5,7 +5,7 @@ LICENSE = "GPL"
 #KV = "${@bb.data.getVar('PV',d,True).split('-')[0]}"
 KV = "${@bb.data.getVar('PV',d,True)}"
 
-PR = "r1"
+PR = "r3"
 
 DOSRC = "http://www.do13.in-berlin.de/openzaurus/patches"
 RPSRC = "http://www.rpsys.net/openzaurus/patches"
@@ -78,6 +78,11 @@ SRC_URI = "ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.12.tar.gz \
            ${DOSRC}/tosa-lcd-r3.patch;patch=1 \
            ${DOSRC}/tosa-2.6.13-r1.patch;patch=1 \
            ${RPSRC}/temp/tosa-bl-r5.patch;patch=1 \
+           ${RPSRC}/pxa27x_extraregs-r0.patch;patch=1 \
+           ${RPSRC}/spitzbase-r0.patch;patch=1 \
+           ${RPSRC}/spitzkbd-r0.patch;patch=1 \
+           ${RPSRC}/spitzssp-r0.patch;patch=1 \
+           ${RPSRC}/spitzlcd-r0.patch;patch=1 \
            file://add-oz-release-string.patch;patch=1 \
            file://add-elpp-stuff.patch;patch=1 \
            file://pxa-serial-hack.patch;patch=1 \
@@ -104,10 +109,8 @@ SRC_URI_append_tosa = "${DOSRC}/nand-readid-r1.patch;patch=1 \
 		       ${DOSRC}/wm9712-ts-r2.patch;patch=1 \
                        ${DOSRC}/tosa-pxaac97-r1.patch;patch=1 \
         	       ${DOSRC}/tosa-bluetooth-r0.patch;patch=1 "
-
-SRC_URI_append_spitz = "${BASRC}/spitz-cf-support-r0.patch;patch=1 \
-                        ${BASRC}/spitz-base-r2.patch;patch=1 "
-
+SRC_URI_append_spitz = "${RPSRC}/spitzcf-r0.patch;patch=1 \
+                        ${RPSRC}/spitzts-r0.patch;patch=1 "
 
 S = "${WORKDIR}/linux-2.6.12"
 
@@ -133,7 +136,7 @@ export mem = ${@bb.data.getVar("COLLIE_MEMORY_SIZE",d,1) or "32"}
 export rd  = ${@bb.data.getVar("COLLIE_RAMDISK_SIZE",d,1) or "32"}
 
 CMDLINE_MEM_collie = "mem=${mem}M"
-CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_MEM}"
+CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_MEM} debug"
 
 ###############################################################
 # Enable or disable ELPP via local.conf - default is "no"
-- 
cgit v1.2.3


From b3e10022d14f8ca23811164fc38cfec9332704bf Mon Sep 17 00:00:00 2001
From: Michael Lauer <mickey@vanille-media.de>
Date: Fri, 12 Aug 2005 15:12:06 +0000
Subject: repair openzaurus-pxa27x after someone destroy vital parts of it :/

---
 .../openzaurus-pxa27x_2.4.20-rmk2-embedix20050228.bb   | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/openzaurus-pxa27x_2.4.20-rmk2-embedix20050228.bb b/packages/linux/openzaurus-pxa27x_2.4.20-rmk2-embedix20050228.bb
index 31c2b8fdf8..aaae08a77a 100644
--- a/packages/linux/openzaurus-pxa27x_2.4.20-rmk2-embedix20050228.bb
+++ b/packages/linux/openzaurus-pxa27x_2.4.20-rmk2-embedix20050228.bb
@@ -1,11 +1,10 @@
-DESCRIPTION = "Linux kernel for Sharp Zaurus SL-C1000 and SL-C3000 devices."
-MAINTAINER = "Bernado, Noodles, and Michael 'Mickey' Lauer <mickey@Vanille.de>"
+DESCRIPTION = "Linux kernel 2.4.20-embedix for Sharp Zaurus SL-C1000 and SL-C3000 devices."
 FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/openzaurus-pxa27x-2.4.20-rmk2-embedix20050228"
 SECTION = "kernel"
 PV = "2.4.20-rmk2-embedix"
 LICENSE = "GPL"
 KV = "2.4.20"
-PR = "r11"
+PR = "r12"
 
 SRC_URI = "http://developer.ezaurus.com/sl_j/source/c1000/20050228/linux-c1000-20050228-rom1_01.tar.bz2 \
            file://P01-C3000-clockup_050221.patch;pnum=2;patch=1 \
@@ -53,13 +52,14 @@ inherit kernel
 #
 # Create the kernel command line. CMDLINE_CONSOLE is set through kernel.oeclass.
 #
-CMDLINE_MTDPARTS_spitz   = "mtdparts=sharpsl-nand:7168k@0k(smf),5120k@7168k(root),-(home)"
+CMDLINE_MTDPARTS_spitz   = "mtdparts=sharpsl-nand:7168k@0k(smf),5120k@7168k(root),-(home)  jffs2_orphaned_inodes=delete"
+CMDLINE_MTDPARTS_akita   = "mtdparts=sharpsl-nand:7168k@0k(smf),59392k@7168k(root),-(home) jffs2_orphaned_inodes=delete"
+# CMDLINE_INIT = "init=bin/busybox ash"
+CMDLINE_INIT = ""
 CMDLINE_SHARP_spitz      = "RTC_RESET=1 EQUIPMENT=4 LOGOLANG=1 DEFYEAR=2005 LOGO=1 LAUNCH=q"
-
-CMDLINE_ROOT = "root=/dev/mtdblock2 jffs2_orphaned_inodes=delete LOGOLANG=1 DEFYEAR=2006 LOGO=1 LAUNCH=q"
-# CMDLINE_INIT = "init=/bin/busybox ash"
-CMDLINE_INIT = " "
-CMDLINE = "${CMDLINE_MTDPARTS} ${CMDLINE_ROOT} ${CMDLINE_CONSOLE} ${CMDLINE_INIT}"
+CMDLINE_SHARP_akita      = "EQUIPMENT=0 LOGOLANG=1 DEFYEAR=2006 LOGO=1 LAUNCH=q"
+CMDLINE_ROOT = "root=/dev/mtdblock2"
+CMDLINE = "${CMDLINE_CONSOLE} ${CMDLINE_ROOT} ${CMDLINE_SHARP} ${CMDLINE_INIT}"
 
 #
 # Compensate for sucky bootloader on all Sharp Zaurus models
-- 
cgit v1.2.3