From 8930d02f19c5d65f9d26b7c81b95ba18ba1decea Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Thu, 8 Feb 2007 12:59:45 +0000
Subject: ixp4xx-kernel: Fix redboot breakage in 2.6.20 which was preventing
 the SlugOS/LE boot.

---
 packages/linux/ixp4xx-kernel/2.6.20/series | 2 +-
 packages/linux/ixp4xx-kernel_2.6.20.bb     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/ixp4xx-kernel/2.6.20/series b/packages/linux/ixp4xx-kernel/2.6.20/series
index 71c17940fc..64339d47b0 100644
--- a/packages/linux/ixp4xx-kernel/2.6.20/series
+++ b/packages/linux/ixp4xx-kernel/2.6.20/series
@@ -9,10 +9,10 @@ squashfs/squashfs-force-O2.patch
 squashfs/squashfs-lzma.patch
 squashfs/squashfs-Kconfig.patch
 squashfs/squashfs-Makefile.patch
+00-fix-redboot-bad-code.patch
 07-remove-avila-ixdp425-setup.patch
 08-avila-loft-setup.patch
 09-avila-setup-pata.patch
-11-mtdpart-redboot-config-byteswap.patch
 30-ixp4xx-npe-driver-0.3.1.patch
 37-ixp4xx-net-driver-improve-mac-handling.patch
 39-ixp4xx-net-driver-mtd-load-fw.patch
diff --git a/packages/linux/ixp4xx-kernel_2.6.20.bb b/packages/linux/ixp4xx-kernel_2.6.20.bb
index 2d057799ac..6fd1330cbd 100644
--- a/packages/linux/ixp4xx-kernel_2.6.20.bb
+++ b/packages/linux/ixp4xx-kernel_2.6.20.bb
@@ -6,7 +6,7 @@
 # http://trac.nslu2-linux.org/kernel/
 #
 # The revision that is pulled from SVN is specified below
-IXP4XX_KERNEL_SVN_REV = "683"
+IXP4XX_KERNEL_SVN_REV = "686"
 #
 # The directory containing the patches to be applied is
 # specified below
-- 
cgit v1.2.3


From abd27ceb3d513b802fa1c678d49cf61413b32eb0 Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Mon, 12 Feb 2007 05:48:34 +0000
Subject: ixp4xx-kernel: Enabled EABI compatibilty mode

---
 packages/linux/ixp4xx-kernel/2.6.19/defconfig | 3 ++-
 packages/linux/ixp4xx-kernel/2.6.20/defconfig | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/ixp4xx-kernel/2.6.19/defconfig b/packages/linux/ixp4xx-kernel/2.6.19/defconfig
index 00750f843a..56eaea7a27 100644
--- a/packages/linux/ixp4xx-kernel/2.6.19/defconfig
+++ b/packages/linux/ixp4xx-kernel/2.6.19/defconfig
@@ -189,7 +189,8 @@ CONFIG_PCI=y
 CONFIG_PREEMPT=y
 # CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
diff --git a/packages/linux/ixp4xx-kernel/2.6.20/defconfig b/packages/linux/ixp4xx-kernel/2.6.20/defconfig
index a7cdacc960..93380dd3b9 100644
--- a/packages/linux/ixp4xx-kernel/2.6.20/defconfig
+++ b/packages/linux/ixp4xx-kernel/2.6.20/defconfig
@@ -196,7 +196,8 @@ CONFIG_PCI=y
 CONFIG_PREEMPT=y
 # CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
-- 
cgit v1.2.3


From 93421f8375dee985c4aab983d172e90684465c5a Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Mon, 12 Feb 2007 05:50:33 +0000
Subject: ixp4xx-kernel: Modified to use arm-kernel-shim instead of hard-coded
 devio incantations

---
 packages/linux/ixp4xx-kernel/2.6.19/series | 2 --
 packages/linux/ixp4xx-kernel/2.6.20/series | 2 --
 2 files changed, 4 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/ixp4xx-kernel/2.6.19/series b/packages/linux/ixp4xx-kernel/2.6.19/series
index ec0e7a81c5..e7ef3083dd 100644
--- a/packages/linux/ixp4xx-kernel/2.6.19/series
+++ b/packages/linux/ixp4xx-kernel/2.6.19/series
@@ -39,8 +39,6 @@ squashfs/squashfs-Makefile.patch
 86-nas100d-rtc-fixup.patch
 87-dsmg600-rtc-fixup.patch
 88-dsmg600-dflt-cmdline.patch
-88-nas100d-dflt-cmdline.patch
-88-nslu2-dflt-cmdline.patch
 95-pata-ixp4xx.patch
 96-fsg3-support.patch
 97-avila-setup-pata.patch
diff --git a/packages/linux/ixp4xx-kernel/2.6.20/series b/packages/linux/ixp4xx-kernel/2.6.20/series
index 64339d47b0..7100d2f806 100644
--- a/packages/linux/ixp4xx-kernel/2.6.20/series
+++ b/packages/linux/ixp4xx-kernel/2.6.20/series
@@ -36,8 +36,6 @@ squashfs/squashfs-Makefile.patch
 86-nas100d-rtc-fixup.patch
 87-dsmg600-rtc-fixup.patch
 88-dsmg600-dflt-cmdline.patch
-88-nas100d-dflt-cmdline.patch
-88-nslu2-dflt-cmdline.patch
 96-fsg3-support.patch
 98-sata_via-pata-support-upstream.patch
 99-avila-mtd-microcode.patch
-- 
cgit v1.2.3


From 78a8f7905503336c0bcdb8def6f190b009d9c9e4 Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Mon, 12 Feb 2007 05:51:00 +0000
Subject: ixp4xx-kernel: Modified to use arm-kernel-shim instead of hard-coded
 devio incantations

---
 packages/linux/ixp4xx-kernel.inc       | 43 +++++++++++++++++-----------------
 packages/linux/ixp4xx-kernel_2.6.19.bb | 15 +-----------
 packages/linux/ixp4xx-kernel_2.6.20.bb | 15 +-----------
 3 files changed, 23 insertions(+), 50 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/ixp4xx-kernel.inc b/packages/linux/ixp4xx-kernel.inc
index 3a80703420..d848427921 100644
--- a/packages/linux/ixp4xx-kernel.inc
+++ b/packages/linux/ixp4xx-kernel.inc
@@ -26,6 +26,8 @@ SECTION = "kernel"
 DESCRIPTION = "Linux kernel for the Intel IXP4xx device"
 LICENSE = "GPL"
 
+DEPENDS = "arm-kernel-shim devio-native"
+
 # Linux kernel source has the general form linux-X.Y.Z-patchP,
 # X.Y is the major version number, Z (which may have multiple
 # parts) is a sub-version and 'patch' is something like 'mm' or
@@ -298,12 +300,8 @@ pkg_postrm_kernel-image-fsg3 () {
 	update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${SITEINFO_ENDIANESS}-${KERNEL_VERSION} || true
 }
 
-#FIXUP: the correct instructions to copy the kernel prepended with the le fixup
-#FIXME: do a fixup for BE too...
-FIXUP_armeb = "cp$"
-FIXUP_arm   = "wb 0xee110f10,4;wb 0xe3c00080,4;wb 0xee010f10,4;xp $,4"
-
-DEPENDS += "devio-native"
+BYTESWAP_armeb = "cp$"
+BYTESWAP_arm   = "xp $,4"
 
 # We need the alternatives to happen in the kernel-image packages, not in
 # the kernel package, because only the images know the name of the kernel.
@@ -312,22 +310,23 @@ pkg_postinst_kernel () {
 pkg_postrm_kernel () {
 }
 
-# copy_image <dest> <cmdline> <machine-id>
+# copy_image <dest> <machine>
 #	copy the zImage and append the appropriate shim
 #  dest:       where to copy to
-#  cmdline:    command line to pass to image
-#  machine-id: decimal machine id to prepend, empty for none
+#  machine:    machine shim to prepend, empty for none
 copy_image() {
-	local setmach
+	local shim
 
-	setmach=""
-	test -n "$2" && setmach="wb $2 . 256/ 255& 0xe3a01c00+, 4; wb 255& 0xe3811000+, 4;"
+	shim="/dev/null"
+	test -n "$2" && shim="${STAGING_LOADER_DIR}/arm-kernel-shim-$2.bin"
 
-	rm -f "$1".new
-	devio '<<${KERNEL_OUTPUT}' >"$1".new "$setmach"'${FIXUP}' || {
+	rm -f "$1".new "$1".shimmed
+	cat $shim ${KERNEL_OUTPUT} > "$1".shimmed
+	devio '<<'"$1"'.shimmed' >"$1".new '${BYTESWAP}' || {
 		echo 'ERROR: ${KERNEL_OUTPUT}: failed to copy zImage' >&2
 		return 1
 	}
+	rm -f "$1".shimmed
 	mv "$1".new "$1"
 }
 
@@ -342,10 +341,10 @@ do_install_append() {
 	install_image '${MACHINE_ARCH}'
 
 	# Add the machine specific images, with appropriate suffixes
-	install_image 'nslu2${SITEINFO_ENDIANESS}' '${nslu2_MACHID}'
-	install_image 'nas100d${SITEINFO_ENDIANESS}' '${nas100d_MACHID}'
-	install_image 'dsmg600${SITEINFO_ENDIANESS}' '${dsmg600_MACHID}'
-	install_image 'fsg3${SITEINFO_ENDIANESS}' '${fsg3_MACHID}'
+	install_image 'nslu2${SITEINFO_ENDIANESS}' 'nslu2'
+	install_image 'nas100d${SITEINFO_ENDIANESS}' 'nas100d'
+	install_image 'dsmg600${SITEINFO_ENDIANESS}' 'dsmg600'
+	install_image 'fsg3${SITEINFO_ENDIANESS}' 'fsg3'
 }
 
 do_deploy[dirs] = "${S}"
@@ -359,10 +358,10 @@ do_deploy() {
 	deploy_image '${MACHINE_ARCH}'
 
 	# And the machine specific images
-	deploy_image 'nslu2${SITEINFO_ENDIANESS}' '${nslu2_MACHID}'
-	deploy_image 'nas100d${SITEINFO_ENDIANESS}' '${nas100d_MACHID}'
-	deploy_image 'dsmg600${SITEINFO_ENDIANESS}' '${dsmg600_MACHID}'
-	deploy_image 'fsg3${SITEINFO_ENDIANESS}' '${fsg3_MACHID}'
+	deploy_image 'nslu2${SITEINFO_ENDIANESS}' 'nslu2'
+	deploy_image 'nas100d${SITEINFO_ENDIANESS}' 'nas100d'
+	deploy_image 'dsmg600${SITEINFO_ENDIANESS}' 'dsmg600'
+	deploy_image 'fsg3${SITEINFO_ENDIANESS}' 'fsg3'
 }
 
 addtask deploy before do_build after do_compile
diff --git a/packages/linux/ixp4xx-kernel_2.6.19.bb b/packages/linux/ixp4xx-kernel_2.6.19.bb
index f10af6c050..eba9d6a404 100644
--- a/packages/linux/ixp4xx-kernel_2.6.19.bb
+++ b/packages/linux/ixp4xx-kernel_2.6.19.bb
@@ -6,7 +6,7 @@
 # http://trac.nslu2-linux.org/kernel/
 #
 # The revision that is pulled from SVN is specified below
-IXP4XX_KERNEL_SVN_REV = "683"
+IXP4XX_KERNEL_SVN_REV = "693"
 #
 # The directory containing the patches to be applied is
 # specified below
@@ -23,16 +23,3 @@ require ixp4xx-kernel-svnpatch.inc
 
 SRC_URI += "file://defconfig"
 SRC_URI += "file://series"
-
-# Remove the specific cmdline hacking patches if we are not building for nslu2.
-addtask remove_cmdline_hacks before do_patch after do_unpack
-do_remove_cmdline_hacks() {
-
-#	if [ "${MACHINE}" != "nslu2" ] ; then
-		sed	-e '/88-nas100d-dflt-cmdline.patch/d' \
-			-e '/88-nslu2-dflt-cmdline.patch/d' \
-			'${WORKDIR}/series' > '${WORKDIR}/series.new'
-		mv '${WORKDIR}/series.new' '${WORKDIR}/series'
-#	fi
-
-}
diff --git a/packages/linux/ixp4xx-kernel_2.6.20.bb b/packages/linux/ixp4xx-kernel_2.6.20.bb
index 6fd1330cbd..2e768b133b 100644
--- a/packages/linux/ixp4xx-kernel_2.6.20.bb
+++ b/packages/linux/ixp4xx-kernel_2.6.20.bb
@@ -6,7 +6,7 @@
 # http://trac.nslu2-linux.org/kernel/
 #
 # The revision that is pulled from SVN is specified below
-IXP4XX_KERNEL_SVN_REV = "686"
+IXP4XX_KERNEL_SVN_REV = "693"
 #
 # The directory containing the patches to be applied is
 # specified below
@@ -23,16 +23,3 @@ require ixp4xx-kernel-svnpatch.inc
 
 SRC_URI += "file://defconfig"
 SRC_URI += "file://series"
-
-# Remove the specific cmdline hacking patches if we are not building for nslu2.
-addtask remove_cmdline_hacks before do_patch after do_unpack
-do_remove_cmdline_hacks() {
-
-	if [ "${MACHINE}" != "nslu2" ] ; then
-		sed	-e '/88-nas100d-dflt-cmdline.patch/d' \
-			-e '/88-nslu2-dflt-cmdline.patch/d' \
-			'${WORKDIR}/series' > '${WORKDIR}/series.new'
-		mv '${WORKDIR}/series.new' '${WORKDIR}/series'
-	fi
-
-}
-- 
cgit v1.2.3


From 8933f1a15604ac71bfa3c2b1951df67250c9a291 Mon Sep 17 00:00:00 2001
From: Marcin Juszkiewicz <hrw@openembedded.org>
Date: Tue, 13 Feb 2007 15:29:41 +0000
Subject: linux: updated progear backlight support

---
 packages/linux/linux/progear/progear_bl-r6.patch | 186 +++++++++++------------
 1 file changed, 91 insertions(+), 95 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/linux/progear/progear_bl-r6.patch b/packages/linux/linux/progear/progear_bl-r6.patch
index 5ef7469ff3..6ac01714b7 100644
--- a/packages/linux/linux/progear/progear_bl-r6.patch
+++ b/packages/linux/linux/progear/progear_bl-r6.patch
@@ -7,35 +7,34 @@ driver by M Schacht.
 Signed-Off-By: Marcin Juszkiewicz <openembedded@hrw.one.pl>
 
 ---
-Patch follow kernel version 2.6.19-rc6
+Patch follow kernel version 2.6.20
 
  Kconfig      |    8 +++
- Makefile     |    1
- progear_bl.c |  155 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 164 insertions(+)
+ Makefile     |    1 
+ progear_bl.c |  154 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 163 insertions(+)
 
-
-Index: linux-2.6.20/drivers/video/backlight/Kconfig
+Index: git/drivers/video/backlight/Kconfig
 ===================================================================
---- linux-2.6.20.orig/drivers/video/backlight/Kconfig	2007-02-04 19:44:54.000000000 +0100
-+++ linux-2.6.20/drivers/video/backlight/Kconfig	2007-02-05 16:13:13.000000000 +0100
+--- git.orig/drivers/video/backlight/Kconfig	2006-12-29 17:31:36.511043439 +0100
++++ git/drivers/video/backlight/Kconfig	2007-02-07 08:57:31.020095845 +0100
 @@ -66,3 +66,11 @@
  	  If you have a HP Jornada 680, say y to enable the
  	  backlight driver.
  
 +config BACKLIGHT_PROGEAR
 +       tristate "Frontpath ProGear Backlight Driver"
-+       depends on BACKLIGHT_DEVICE && PCI
++       depends on BACKLIGHT_DEVICE && PCI && X86
 +       default y
 +       help
 +         If you have a Frontpath ProGear say Y to enable the
 +         backlight driver.
 +
-Index: linux-2.6.20/drivers/video/backlight/progear_bl.c
+Index: git/drivers/video/backlight/progear_bl.c
 ===================================================================
 --- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.20/drivers/video/backlight/progear_bl.c	2007-02-05 16:29:14.000000000 +0100
-@@ -0,0 +1,157 @@
++++ git/drivers/video/backlight/progear_bl.c	2007-02-07 08:55:46.813993140 +0100
+@@ -0,0 +1,154 @@
 +/*
 + *  Backlight Driver for Frontpath ProGear HX1050+
 + *
@@ -68,123 +67,120 @@ Index: linux-2.6.20/drivers/video/backlight/progear_bl.c
 +#define HW_LEVEL_MAX           0x77
 +#define HW_LEVEL_MIN           0x4f
 +
-+static int progearbl_intensity;
-+static struct backlight_properties progearbl_data;
-+static struct backlight_device *progear_backlight_device;
-+
 +static struct pci_dev *pmu_dev = NULL;
 +static struct pci_dev *sb_dev = NULL;
 +
-+static int progearbl_send_intensity(struct backlight_device *bd)
++static int progearbl_set_intensity(struct backlight_device *bd)
 +{
-+       int intensity = bd->props->brightness;
++	int intensity = bd->props->brightness;
 +
-+       if (bd->props->power != FB_BLANK_UNBLANK)
-+               intensity = 0;
-+       if (bd->props->fb_blank != FB_BLANK_UNBLANK)
-+               intensity = 0;
++	if (bd->props->power != FB_BLANK_UNBLANK)
++		intensity = 0;
++	if (bd->props->fb_blank != FB_BLANK_UNBLANK)
++		intensity = 0;
 +
-+       pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
++	pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
 +
-+       progearbl_intensity = intensity;
-+
-+       return 0;
++	return 0;
 +}
 +
 +static int progearbl_get_intensity(struct backlight_device *bd)
 +{
-+       return progearbl_intensity;
-+}
-+
-+static int progearbl_set_intensity(struct backlight_device *bd)
-+{
-+       progearbl_send_intensity(progear_backlight_device);
++	u8 intensity;
++	pci_read_config_byte(pmu_dev, PMU_LPCR, &intensity);
 +
-+       return 0;
++	return intensity - HW_LEVEL_MIN;
 +}
 +
 +static struct backlight_properties progearbl_data = {
-+       .owner = THIS_MODULE,
-+       .get_brightness = progearbl_get_intensity,
-+       .update_status = progearbl_set_intensity,
++	.owner = THIS_MODULE,
++	.get_brightness = progearbl_get_intensity,
++	.update_status = progearbl_set_intensity,
 +};
 +
 +static int progearbl_probe(struct platform_device *pdev)
 +{
-+       u8 temp;
-+
-+       pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, 0);
-+       if (!pmu_dev) {
-+               printk("ALI M7101 PMU not found.\n");
-+               return -ENODEV;
-+       }
-+
-+       sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, 0);
-+       if (!sb_dev) {
-+               printk("ALI 1533 SB not found.\n");
-+               pci_dev_put(pmu_dev);
-+               return -ENODEV;
-+       }
-+
-+       /*     Set SB_MPS1 to enable brightness control. */
-+       pci_read_config_byte(sb_dev, SB_MPS1, &temp);
-+       pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
-+
-+       progear_backlight_device = backlight_device_register("progear-bl",
-+			   &pdev->dev, NULL, &progearbl_data);
-+       if (IS_ERR(progear_backlight_device))
-+               return PTR_ERR(progear_backlight_device);
-+
-+       progearbl_data.power = FB_BLANK_UNBLANK;
-+       progearbl_data.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
-+       progearbl_data.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
-+       progearbl_send_intensity(progear_backlight_device);
-+
-+       return 0;
++	u8 temp;
++	struct backlight_device *progear_backlight_device;
++
++	pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, 0);
++	if (!pmu_dev) {
++		printk("ALI M7101 PMU not found.\n");
++		return -ENODEV;
++	}
++
++	sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, 0);
++	if (!sb_dev) {
++		printk("ALI 1533 SB not found.\n");
++		pci_dev_put(pmu_dev);
++		return -ENODEV;
++	}
++
++	/*     Set SB_MPS1 to enable brightness control. */
++	pci_read_config_byte(sb_dev, SB_MPS1, &temp);
++	pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
++
++	progear_backlight_device = backlight_device_register("progear-bl",
++							     &pdev->dev, NULL,
++							     &progearbl_data);
++	if (IS_ERR(progear_backlight_device))
++		return PTR_ERR(progear_backlight_device);
++
++	platform_set_drvdata(pdev, progear_backlight_device);
++
++	progearbl_data.power = FB_BLANK_UNBLANK;
++	progearbl_data.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
++	progearbl_data.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
++	progearbl_set_intensity(progear_backlight_device);
++
++	return 0;
 +}
 +
-+static int progearbl_remove(struct platform_device *dev)
++static int progearbl_remove(struct platform_device *pdev)
 +{
-+       backlight_device_unregister(progear_backlight_device);
++	struct backlight_device *bd = platform_get_drvdata(pdev);
++	backlight_device_unregister(bd);
 +
-+       return 0;
++	return 0;
 +}
 +
 +static struct platform_driver progearbl_driver = {
-+       .probe = progearbl_probe,
-+       .remove = progearbl_remove,
-+       .driver = {
-+                  .name = "progear-bl",
-+                  },
++	.probe = progearbl_probe,
++	.remove = progearbl_remove,
++	.driver = {
++		   .name = "progear-bl",
++		   },
 +};
 +
 +static struct platform_device *progearbl_device;
 +
 +static int __init progearbl_init(void)
 +{
-+       int ret = platform_driver_register(&progearbl_driver);
-+       if (!ret) {
-+               progearbl_device = platform_device_alloc("progear-bl", -1);
-+               if (!progearbl_device)
-+                       return -ENOMEM;
-+
-+               ret = platform_device_add(progearbl_device);
-+
-+               if (ret) {
-+                       platform_device_put(progearbl_device);
-+                       platform_driver_unregister(&progearbl_driver);
-+               }
-+       }
-+       return ret;
++	int ret = platform_driver_register(&progearbl_driver);
++
++	if (!ret) {
++		progearbl_device = platform_device_alloc("progear-bl", -1);
++		if (!progearbl_device)
++			return -ENOMEM;
++
++		ret = platform_device_add(progearbl_device);
++
++		if (ret) {
++			platform_device_put(progearbl_device);
++			platform_driver_unregister(&progearbl_driver);
++		}
++	}
++
++	return ret;
 +}
 +
 +static void __exit progearbl_exit(void)
 +{
-+       pci_dev_put(pmu_dev);
-+       pci_dev_put(sb_dev);
++	pci_dev_put(pmu_dev);
++	pci_dev_put(sb_dev);
 +
-+       platform_device_unregister(progearbl_device);
-+       platform_driver_unregister(&progearbl_driver);
++	platform_device_unregister(progearbl_device);
++	platform_driver_unregister(&progearbl_driver);
 +}
 +
 +module_init(progearbl_init);
@@ -193,10 +189,10 @@ Index: linux-2.6.20/drivers/video/backlight/progear_bl.c
 +MODULE_AUTHOR("Marcin Juszkiewicz <linux@hrw.one.pl>");
 +MODULE_DESCRIPTION("ProGear Backlight Driver");
 +MODULE_LICENSE("GPL");
-Index: linux-2.6.20/drivers/video/backlight/Makefile
+Index: git/drivers/video/backlight/Makefile
 ===================================================================
---- linux-2.6.20.orig/drivers/video/backlight/Makefile	2007-02-04 19:44:54.000000000 +0100
-+++ linux-2.6.20/drivers/video/backlight/Makefile	2007-02-05 16:13:13.000000000 +0100
+--- git.orig/drivers/video/backlight/Makefile	2006-12-29 17:31:36.511043439 +0100
++++ git/drivers/video/backlight/Makefile	2007-02-06 21:34:54.503712923 +0100
 @@ -5,3 +5,4 @@
  obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
  obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
-- 
cgit v1.2.3


From 90613b4eb49820f5c78234603d0fcfbe621f6f09 Mon Sep 17 00:00:00 2001
From: Bernhard Guillon <Bernhard.Guillon@opensimpad.org>
Date: Tue, 13 Feb 2007 15:32:49 +0000
Subject: simpad: added 2.6.20 kernel - close #1867

---
 packages/linux/linux/simpad/.mtn2git_empty         |    0
 packages/linux/linux/simpad/defconfig              | 1167 +++++
 .../linux/simpad/linux-2.6.20.SIMpad.mq200.patch   | 5382 ++++++++++++++++++++
 .../linux-2.6.20.SIMpad.ucb1x00-switches.patch     |  227 +
 packages/linux/linux_2.6.20.bb                     |    5 +
 5 files changed, 6781 insertions(+)
 create mode 100644 packages/linux/linux/simpad/.mtn2git_empty
 create mode 100644 packages/linux/linux/simpad/defconfig
 create mode 100644 packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch
 create mode 100644 packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch

(limited to 'packages/linux')

diff --git a/packages/linux/linux/simpad/.mtn2git_empty b/packages/linux/linux/simpad/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/packages/linux/linux/simpad/defconfig b/packages/linux/linux/simpad/defconfig
new file mode 100644
index 0000000000..a718a46989
--- /dev/null
+++ b/packages/linux/linux/simpad/defconfig
@@ -0,0 +1,1167 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Mon Feb 12 16:35:21 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="oe1"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+# CONFIG_SA1100_COLLIE is not set
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+CONFIG_SA1100_SIMPAD=y
+# CONFIG_SA1100_SSP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_SA1100=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=2
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+CONFIG_IRPORT_SIR=m
+
+#
+# Old Serial dongle support
+#
+# CONFIG_DONGLE_OLD is not set
+
+#
+# FIR device drivers
+#
+CONFIG_SA1100_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_SA1100=y
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_CS89x0 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
+CONFIG_PCMCIA_WAVELAN=m
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=800
+CONFIG_INPUT_TSDEV_SCREEN_Y=600
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_MCP=y
+CONFIG_MCP_SA11X0=y
+CONFIG_MCP_UCB1200=y
+CONFIG_MCP_UCB1200_TS=y
+CONFIG_MCP_UCB1200_SWITCHES=y
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_SA1100 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_MQ200=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch
new file mode 100644
index 0000000000..3c91b2cbf8
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch
@@ -0,0 +1,5382 @@
+diff -uNr linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig linux-2.6.20/arch/arm/configs/simpad_defconfig
+--- linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig	2007-02-10 19:01:14.000000000 +0100
++++ linux-2.6.20/arch/arm/configs/simpad_defconfig	2007-02-11 16:39:39.000000000 +0100
+@@ -1,75 +1,121 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.12-rc1-bk2
+-# Mon Mar 28 00:10:36 2005
++# Linux kernel version: 2.6.19.1
++# Tue Jan  2 22:07:26 2007
+ #
+ CONFIG_ARM=y
++# CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
+-CONFIG_UID16=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_IOMAP=y
++CONFIG_ARCH_MTD_XIP=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+ 
+ #
+ # Code maturity level options
+ #
+ CONFIG_EXPERIMENTAL=y
+-CONFIG_CLEAN_COMPILE=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
+ 
+ #
+ # General setup
+ #
+ CONFIG_LOCALVERSION="oe1"
++CONFIG_LOCALVERSION_AUTO=y
+ CONFIG_SWAP=y
+ CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+-CONFIG_SYSCTL=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
+ # CONFIG_AUDIT is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_KOBJECT_UEVENT=y
+ # CONFIG_IKCONFIG is not set
++# CONFIG_RELAY is not set
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
+ CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+ CONFIG_KALLSYMS_ALL=y
+ CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
+ CONFIG_EPOLL=y
+-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SHMEM=y
+-CONFIG_CC_ALIGN_FUNCTIONS=0
+-CONFIG_CC_ALIGN_LABELS=0
+-CONFIG_CC_ALIGN_LOOPS=0
+-CONFIG_CC_ALIGN_JUMPS=0
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
+ 
+ #
+ # Loadable module support
+ #
+ CONFIG_MODULES=y
+ # CONFIG_MODULE_UNLOAD is not set
+-CONFIG_OBSOLETE_MODPARM=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+ 
+ #
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
+ # System Type
+ #
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
+ # CONFIG_ARCH_CLPS7500 is not set
+ # CONFIG_ARCH_CLPS711X is not set
+ # CONFIG_ARCH_CO285 is not set
+ # CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
+ # CONFIG_ARCH_FOOTBRIDGE is not set
+-# CONFIG_ARCH_INTEGRATOR is not set
+-# CONFIG_ARCH_IOP3XX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+ CONFIG_ARCH_SA1100=y
+@@ -77,9 +123,6 @@
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
+ # CONFIG_ARCH_OMAP is not set
+-# CONFIG_ARCH_VERSATILE is not set
+-# CONFIG_ARCH_IMX is not set
+-# CONFIG_ARCH_H720X is not set
+ 
+ #
+ # SA11x0 Implementations
+@@ -109,11 +152,14 @@
+ CONFIG_CPU_CACHE_V4WB=y
+ CONFIG_CPU_CACHE_VIVT=y
+ CONFIG_CPU_TLB_V4WB=y
+-CONFIG_CPU_MINICACHE=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
+ 
+ #
+ # Processor Features
+ #
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
+ 
+ #
+ # Bus support
+@@ -126,6 +172,8 @@
+ CONFIG_PCCARD=y
+ # CONFIG_PCMCIA_DEBUG is not set
+ CONFIG_PCMCIA=y
++CONFIG_PCMCIA_LOAD_CIS=y
++CONFIG_PCMCIA_IOCTL=y
+ 
+ #
+ # PC-card bridges
+@@ -138,7 +186,21 @@
+ # Kernel Features
+ #
+ CONFIG_PREEMPT=y
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
++CONFIG_NODES_SHIFT=2
++CONFIG_SELECT_MEMORY_MODEL=y
++# CONFIG_FLATMEM_MANUAL is not set
++CONFIG_DISCONTIGMEM_MANUAL=y
++# CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_DISCONTIGMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_NEED_MULTIPLE_NODES=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
+ CONFIG_LEDS=y
+ CONFIG_LEDS_TIMER=y
+ # CONFIG_LEDS_CPU is not set
+@@ -181,9 +243,161 @@
+ #
+ CONFIG_PM=y
+ # CONFIG_PM_LEGACY is not set
++# CONFIG_PM_DEBUG is not set
++# CONFIG_PM_SYSFS_DEPRECATED is not set
+ CONFIG_APM=y
+ 
+ #
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++CONFIG_IRDA=m
++
++#
++# IrDA protocols
++#
++CONFIG_IRLAN=m
++CONFIG_IRNET=m
++CONFIG_IRCOMM=m
++# CONFIG_IRDA_ULTRA is not set
++
++#
++# IrDA options
++#
++# CONFIG_IRDA_CACHE_LAST_LSAP is not set
++# CONFIG_IRDA_FAST_RR is not set
++# CONFIG_IRDA_DEBUG is not set
++
++#
++# Infrared-port device drivers
++#
++
++#
++# SIR device drivers
++#
++CONFIG_IRTTY_SIR=m
++
++#
++# Dongle support
++#
++# CONFIG_DONGLE is not set
++
++#
++# Old SIR device drivers
++#
++CONFIG_IRPORT_SIR=m
++
++#
++# Old Serial dongle support
++#
++# CONFIG_DONGLE_OLD is not set
++
++#
++# FIR device drivers
++#
++CONFIG_SA1100_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=m
++CONFIG_BT_SCO=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++# CONFIG_BT_HIDP is not set
++
++#
++# Bluetooth device drivers
++#
++# CONFIG_BT_HCIUART is not set
++# CONFIG_BT_HCIDTL1 is not set
++# CONFIG_BT_HCIBT3C is not set
++# CONFIG_BT_HCIBLUECARD is not set
++# CONFIG_BT_HCIBTUART is not set
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_IEEE80211 is not set
++CONFIG_WIRELESS_EXT=y
++
++#
+ # Device Drivers
+ #
+ 
+@@ -192,8 +406,14 @@
+ #
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=m
++CONFIG_FW_LOADER=y
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
+ 
+ #
+ # Memory Technology Devices (MTD)
+@@ -214,6 +434,8 @@
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+ # CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
+ 
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -236,6 +458,7 @@
+ # CONFIG_MTD_CFI_I2 is not set
+ # CONFIG_MTD_CFI_I4 is not set
+ # CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_OTP is not set
+ CONFIG_MTD_CFI_INTELEXT=y
+ # CONFIG_MTD_CFI_AMDSTD is not set
+ # CONFIG_MTD_CFI_STAA is not set
+@@ -243,6 +466,7 @@
+ CONFIG_MTD_RAM=y
+ # CONFIG_MTD_ROM is not set
+ # CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
+ # CONFIG_MTD_XIP is not set
+ 
+ #
+@@ -252,8 +476,8 @@
+ # CONFIG_MTD_PHYSMAP is not set
+ # CONFIG_MTD_ARM_INTEGRATOR is not set
+ CONFIG_MTD_SA1100=y
+-# CONFIG_MTD_EDB7312 is not set
+ # CONFIG_MTD_IMPA7 is not set
++# CONFIG_MTD_PLATRAM is not set
+ 
+ #
+ # Self-contained MTD device drivers
+@@ -261,7 +485,6 @@
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLKMTD is not set
+ # CONFIG_MTD_BLOCK2MTD is not set
+ 
+ #
+@@ -277,6 +500,11 @@
+ # CONFIG_MTD_NAND is not set
+ 
+ #
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
+ # Parallel port support
+ #
+ # CONFIG_PARPORT is not set
+@@ -289,8 +517,6 @@
+ #
+ # Block devices
+ #
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_DEV_XD is not set
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=m
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -298,16 +524,9 @@
+ CONFIG_BLK_DEV_RAM=m
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_INITRAMFS_SOURCE=""
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_BLK_DEV_INITRD is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+ # CONFIG_ATA_OVER_ETH is not set
+ 
+ #
+@@ -318,7 +537,14 @@
+ #
+ # SCSI device support
+ #
++# CONFIG_RAID_ATTRS is not set
+ # CONFIG_SCSI is not set
++# CONFIG_SCSI_NETLINK is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
+ 
+ #
+ # Multi-device support (RAID and LVM)
+@@ -328,6 +554,7 @@
+ #
+ # Fusion MPT device support
+ #
++# CONFIG_FUSION is not set
+ 
+ #
+ # IEEE 1394 (FireWire) support
+@@ -338,136 +565,8 @@
+ #
+ 
+ #
+-# Networking support
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-CONFIG_PACKET_MMAP=y
+-# CONFIG_NETLINK_DEV is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_IP_TCPDIAG is not set
+-# CONFIG_IP_TCPDIAG_IPV6 is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_NETFILTER is not set
+-
+-#
+-# SCTP Configuration (EXPERIMENTAL)
+-#
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_NET_DIVERT is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+-# CONFIG_NET_SCHED is not set
+-# CONFIG_NET_CLS_ROUTE is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_HAMRADIO is not set
+-CONFIG_IRDA=m
+-
+-#
+-# IrDA protocols
+-#
+-CONFIG_IRLAN=m
+-CONFIG_IRNET=m
+-CONFIG_IRCOMM=m
+-# CONFIG_IRDA_ULTRA is not set
+-
+-#
+-# IrDA options
+-#
+-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+-# CONFIG_IRDA_FAST_RR is not set
+-# CONFIG_IRDA_DEBUG is not set
+-
+-#
+-# Infrared-port device drivers
+-#
+-
++# Network device support
+ #
+-# SIR device drivers
+-#
+-CONFIG_IRTTY_SIR=m
+-
+-#
+-# Dongle support
+-#
+-# CONFIG_DONGLE is not set
+-
+-#
+-# Old SIR device drivers
+-#
+-CONFIG_IRPORT_SIR=m
+-
+-#
+-# Old Serial dongle support
+-#
+-# CONFIG_DONGLE_OLD is not set
+-
+-#
+-# FIR device drivers
+-#
+-# CONFIG_NSC_FIR is not set
+-# CONFIG_WINBOND_FIR is not set
+-# CONFIG_SMC_IRCC_FIR is not set
+-# CONFIG_ALI_FIR is not set
+-CONFIG_SA1100_FIR=m
+-CONFIG_BT=m
+-CONFIG_BT_L2CAP=m
+-CONFIG_BT_SCO=m
+-CONFIG_BT_RFCOMM=m
+-CONFIG_BT_RFCOMM_TTY=y
+-CONFIG_BT_BNEP=m
+-CONFIG_BT_BNEP_MC_FILTER=y
+-CONFIG_BT_BNEP_PROTO_FILTER=y
+-# CONFIG_BT_HIDP is not set
+-
+-#
+-# Bluetooth device drivers
+-#
+-# CONFIG_BT_HCIUART is not set
+-# CONFIG_BT_HCIDTL1 is not set
+-# CONFIG_BT_HCIBT3C is not set
+-# CONFIG_BT_HCIBLUECARD is not set
+-# CONFIG_BT_HCIBTUART is not set
+-# CONFIG_BT_HCIVHCI is not set
+ CONFIG_NETDEVICES=y
+ CONFIG_DUMMY=y
+ # CONFIG_BONDING is not set
+@@ -480,14 +579,19 @@
+ # CONFIG_ARCNET is not set
+ 
+ #
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=m
+ # CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_LANCE is not set
+ # CONFIG_NET_VENDOR_SMC is not set
+ # CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
+ # CONFIG_NET_VENDOR_RACAL is not set
+ # CONFIG_AT1700 is not set
+ # CONFIG_DEPCA is not set
+@@ -497,7 +601,6 @@
+ # CONFIG_AC3200 is not set
+ # CONFIG_APRICOT is not set
+ # CONFIG_CS89x0 is not set
+-# CONFIG_NET_POCKET is not set
+ 
+ #
+ # Ethernet (1000 Mbit)
+@@ -516,6 +619,7 @@
+ # Wireless LAN (non-hamradio)
+ #
+ CONFIG_NET_RADIO=y
++# CONFIG_NET_WIRELESS_RTNETLINK is not set
+ 
+ #
+ # Obsolete Wireless cards support (pre-802.11)
+@@ -542,6 +646,7 @@
+ #
+ # CONFIG_AIRO_CS is not set
+ # CONFIG_PCMCIA_WL3501 is not set
++# CONFIG_HOSTAP is not set
+ CONFIG_NET_WIRELESS=y
+ 
+ #
+@@ -568,10 +673,14 @@
+ CONFIG_PPP_SYNC_TTY=m
+ CONFIG_PPP_DEFLATE=m
+ CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
+ CONFIG_PPPOE=m
+ # CONFIG_SLIP is not set
++CONFIG_SLHC=m
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
+ 
+ #
+ # ISDN subsystem
+@@ -582,6 +691,7 @@
+ # Input device support
+ #
+ CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
+ 
+ #
+ # Userland interfaces
+@@ -614,7 +724,6 @@
+ # CONFIG_SERIO_LIBPS2 is not set
+ # CONFIG_SERIO_RAW is not set
+ # CONFIG_GAMEPORT is not set
+-CONFIG_SOUND_GAMEPORT=y
+ 
+ #
+ # Character devices
+@@ -622,6 +731,7 @@
+ CONFIG_VT=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+ 
+ #
+@@ -649,20 +759,21 @@
+ # Watchdog Cards
+ #
+ # CONFIG_WATCHDOG is not set
++CONFIG_HW_RANDOM=y
+ # CONFIG_NVRAM is not set
+-# CONFIG_RTC is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ 
+ #
+ # Ftape, the floppy tape device driver
+ #
+-# CONFIG_DRM is not set
+ 
+ #
+ # PCMCIA character devices
+ #
+ # CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
+ # CONFIG_RAW_DRIVER is not set
+ 
+ #
+@@ -676,8 +787,48 @@
+ # CONFIG_I2C is not set
+ 
+ #
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_ABITUGURU is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++
++#
+ # Misc devices
+ #
++# CONFIG_TIFM_CORE is not set
++
++#
++# Multimedia Capabilities Port drivers
++#
++# CONFIG_MCP_SA11X0 is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
+ 
+ #
+ # Multimedia devices
+@@ -692,14 +843,18 @@
+ #
+ # Graphics support
+ #
++CONFIG_FIRMWARE_EDID=y
+ CONFIG_FB=y
+-# CONFIG_FB_CFB_FILLRECT is not set
+-# CONFIG_FB_CFB_COPYAREA is not set
+-# CONFIG_FB_CFB_IMAGEBLIT is not set
+-# CONFIG_FB_SOFT_CURSOR is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
+ # CONFIG_FB_MODE_HELPERS is not set
+ # CONFIG_FB_TILEBLITTING is not set
+ # CONFIG_FB_SA1100 is not set
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_MQ200=y
+ # CONFIG_FB_VIRTUAL is not set
+ 
+ #
+@@ -709,6 +864,7 @@
+ # CONFIG_MDA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+ CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+ # CONFIG_FONTS is not set
+ CONFIG_FONT_8x8=y
+ CONFIG_FONT_8x16=y
+@@ -742,9 +898,14 @@
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ # CONFIG_USB is not set
+ 
+ #
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
+ # USB Gadget Support
+ #
+ # CONFIG_USB_GADGET is not set
+@@ -755,14 +916,22 @@
+ # CONFIG_MMC is not set
+ 
+ #
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
+ # File systems
+ #
+ CONFIG_EXT2_FS=m
+ # CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=m
+ CONFIG_EXT3_FS_XATTR=y
+ # CONFIG_EXT3_FS_POSIX_ACL is not set
+ # CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=m
+ # CONFIG_JBD_DEBUG is not set
+ CONFIG_FS_MBCACHE=m
+@@ -771,17 +940,19 @@
+ CONFIG_REISERFS_PROC_INFO=y
+ # CONFIG_REISERFS_FS_XATTR is not set
+ # CONFIG_JFS_FS is not set
+-
+-#
+-# XFS support
+-#
++# CONFIG_FS_POSIX_ACL is not set
+ # CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ CONFIG_DNOTIFY=y
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
+ 
+ #
+ # CD-ROM/DVD Filesystems
+@@ -803,14 +974,12 @@
+ # Pseudo filesystems
+ #
+ CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
+ CONFIG_SYSFS=y
+-CONFIG_DEVFS_FS=y
+-CONFIG_DEVFS_MOUNT=y
+-# CONFIG_DEVFS_DEBUG is not set
+-# CONFIG_DEVPTS_FS_XATTR is not set
+ # CONFIG_TMPFS is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
+ 
+ #
+ # Miscellaneous filesystems
+@@ -827,8 +996,9 @@
+ # CONFIG_JFFS_PROC_FS is not set
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+-# CONFIG_JFFS2_FS_NAND is not set
+-# CONFIG_JFFS2_FS_NOR_ECC is not set
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
+ CONFIG_JFFS2_RTIME=y
+@@ -845,12 +1015,14 @@
+ #
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
+ # CONFIG_NFS_V4 is not set
+ # CONFIG_NFS_DIRECTIO is not set
+ # CONFIG_NFSD is not set
+ # CONFIG_ROOT_NFS is not set
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+@@ -860,6 +1032,7 @@
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
+ 
+ #
+ # Partition Types
+@@ -920,19 +1093,32 @@
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
+-CONFIG_DEBUG_KERNEL=y
++CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_KERNEL=y
+ CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ CONFIG_DEBUG_PREEMPT=y
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_RWSEMS is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_FS is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_RCU_TORTURE_TEST is not set
+ CONFIG_DEBUG_USER=y
+ CONFIG_DEBUG_ERRORS=y
+ CONFIG_DEBUG_LL=y
+@@ -950,14 +1136,12 @@
+ # CONFIG_CRYPTO is not set
+ 
+ #
+-# Hardware crypto devices
+-#
+-
+-#
+ # Library routines
+ #
+ CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
+diff -uNr linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig~ linux-2.6.20/arch/arm/configs/simpad_defconfig~
+--- linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig~	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20/arch/arm/configs/simpad_defconfig~	2007-02-11 16:35:19.000000000 +0100
+@@ -0,0 +1,963 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.12-rc1-bk2
++# Mon Mar 28 00:10:36 2005
++#
++CONFIG_ARM=y
++CONFIG_MMU=y
++CONFIG_UID16=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_IOMAP=y
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_CLEAN_COMPILE=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION="oe1"
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++CONFIG_SYSCTL=y
++# CONFIG_AUDIT is not set
++CONFIG_HOTPLUG=y
++CONFIG_KOBJECT_UEVENT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_EMBEDDED=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SHMEM=y
++CONFIG_CC_ALIGN_FUNCTIONS=0
++CONFIG_CC_ALIGN_LABELS=0
++CONFIG_CC_ALIGN_LOOPS=0
++CONFIG_CC_ALIGN_JUMPS=0
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++# CONFIG_MODULE_UNLOAD is not set
++CONFIG_OBSOLETE_MODPARM=y
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# System Type
++#
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_IOP3XX is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++CONFIG_ARCH_SA1100=y
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_H720X is not set
++
++#
++# SA11x0 Implementations
++#
++# CONFIG_SA1100_ASSABET is not set
++# CONFIG_SA1100_CERF is not set
++# CONFIG_SA1100_COLLIE is not set
++# CONFIG_SA1100_H3100 is not set
++# CONFIG_SA1100_H3600 is not set
++# CONFIG_SA1100_H3800 is not set
++# CONFIG_SA1100_BADGE4 is not set
++# CONFIG_SA1100_JORNADA720 is not set
++# CONFIG_SA1100_HACKKIT is not set
++# CONFIG_SA1100_LART is not set
++# CONFIG_SA1100_PLEB is not set
++# CONFIG_SA1100_SHANNON is not set
++CONFIG_SA1100_SIMPAD=y
++# CONFIG_SA1100_SSP is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_SA1100=y
++CONFIG_CPU_32v4=y
++CONFIG_CPU_ABRT_EV4=y
++CONFIG_CPU_CACHE_V4WB=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_TLB_V4WB=y
++CONFIG_CPU_MINICACHE=y
++
++#
++# Processor Features
++#
++
++#
++# Bus support
++#
++CONFIG_ISA=y
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++CONFIG_PCCARD=y
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=y
++
++#
++# PC-card bridges
++#
++# CONFIG_I82365 is not set
++# CONFIG_TCIC is not set
++CONFIG_PCMCIA_SA1100=y
++
++#
++# Kernel Features
++#
++CONFIG_PREEMPT=y
++CONFIG_DISCONTIGMEM=y
++CONFIG_LEDS=y
++CONFIG_LEDS_TIMER=y
++# CONFIG_LEDS_CPU is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
++# CONFIG_XIP_KERNEL is not set
++
++#
++# CPU Frequency scaling
++#
++# CONFIG_CPU_FREQ is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++CONFIG_BINFMT_MISC=m
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_LEGACY is not set
++CONFIG_APM=y
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=m
++# CONFIG_DEBUG_DRIVER is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_NOSWAP=y
++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
++CONFIG_MTD_CFI_GEOMETRY=y
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++# CONFIG_MTD_CFI_I2 is not set
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++CONFIG_MTD_RAM=y
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_XIP is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++CONFIG_MTD_SA1100=y
++# CONFIG_MTD_EDB7312 is not set
++# CONFIG_MTD_IMPA7 is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLKMTD is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++# CONFIG_MTD_NAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++# CONFIG_PNP is not set
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_XD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CDROM_PKTCDVD is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# ATA/ATAPI/MFM/RLL support
++#
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_SCSI is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# I2O device support
++#
++
++#
++# Networking support
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++# CONFIG_NETLINK_DEV is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_IP_TCPDIAG is not set
++# CONFIG_IP_TCPDIAG_IPV6 is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETFILTER is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_NET_DIVERT is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++# CONFIG_NET_CLS_ROUTE is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_HAMRADIO is not set
++CONFIG_IRDA=m
++
++#
++# IrDA protocols
++#
++CONFIG_IRLAN=m
++CONFIG_IRNET=m
++CONFIG_IRCOMM=m
++# CONFIG_IRDA_ULTRA is not set
++
++#
++# IrDA options
++#
++# CONFIG_IRDA_CACHE_LAST_LSAP is not set
++# CONFIG_IRDA_FAST_RR is not set
++# CONFIG_IRDA_DEBUG is not set
++
++#
++# Infrared-port device drivers
++#
++
++#
++# SIR device drivers
++#
++CONFIG_IRTTY_SIR=m
++
++#
++# Dongle support
++#
++# CONFIG_DONGLE is not set
++
++#
++# Old SIR device drivers
++#
++CONFIG_IRPORT_SIR=m
++
++#
++# Old Serial dongle support
++#
++# CONFIG_DONGLE_OLD is not set
++
++#
++# FIR device drivers
++#
++# CONFIG_NSC_FIR is not set
++# CONFIG_WINBOND_FIR is not set
++# CONFIG_SMC_IRCC_FIR is not set
++# CONFIG_ALI_FIR is not set
++CONFIG_SA1100_FIR=m
++CONFIG_BT=m
++CONFIG_BT_L2CAP=m
++CONFIG_BT_SCO=m
++CONFIG_BT_RFCOMM=m
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=m
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++# CONFIG_BT_HIDP is not set
++
++#
++# Bluetooth device drivers
++#
++# CONFIG_BT_HCIUART is not set
++# CONFIG_BT_HCIDTL1 is not set
++# CONFIG_BT_HCIBT3C is not set
++# CONFIG_BT_HCIBLUECARD is not set
++# CONFIG_BT_HCIBTUART is not set
++# CONFIG_BT_HCIVHCI is not set
++CONFIG_NETDEVICES=y
++CONFIG_DUMMY=y
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++
++#
++# ARCnet devices
++#
++# CONFIG_ARCNET is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=m
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_LANCE is not set
++# CONFIG_NET_VENDOR_SMC is not set
++# CONFIG_SMC91X is not set
++# CONFIG_NET_VENDOR_RACAL is not set
++# CONFIG_AT1700 is not set
++# CONFIG_DEPCA is not set
++# CONFIG_HP100 is not set
++# CONFIG_NET_ISA is not set
++CONFIG_NET_PCI=y
++# CONFIG_AC3200 is not set
++# CONFIG_APRICOT is not set
++# CONFIG_CS89x0 is not set
++# CONFIG_NET_POCKET is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++
++#
++# Ethernet (10000 Mbit)
++#
++
++#
++# Token Ring devices
++#
++# CONFIG_TR is not set
++
++#
++# Wireless LAN (non-hamradio)
++#
++CONFIG_NET_RADIO=y
++
++#
++# Obsolete Wireless cards support (pre-802.11)
++#
++# CONFIG_STRIP is not set
++# CONFIG_ARLAN is not set
++# CONFIG_WAVELAN is not set
++CONFIG_PCMCIA_WAVELAN=m
++# CONFIG_PCMCIA_NETWAVE is not set
++
++#
++# Wireless 802.11 Frequency Hopping cards support
++#
++# CONFIG_PCMCIA_RAYCS is not set
++
++#
++# Wireless 802.11b ISA/PCI cards support
++#
++# CONFIG_HERMES is not set
++# CONFIG_ATMEL is not set
++
++#
++# Wireless 802.11b Pcmcia/Cardbus cards support
++#
++# CONFIG_AIRO_CS is not set
++# CONFIG_PCMCIA_WL3501 is not set
++CONFIG_NET_WIRELESS=y
++
++#
++# PCMCIA network device support
++#
++CONFIG_NET_PCMCIA=y
++CONFIG_PCMCIA_3C589=m
++CONFIG_PCMCIA_3C574=m
++# CONFIG_PCMCIA_FMVJ18X is not set
++CONFIG_PCMCIA_PCNET=m
++# CONFIG_PCMCIA_NMCLAN is not set
++CONFIG_PCMCIA_SMC91C92=m
++CONFIG_PCMCIA_XIRC2PS=m
++# CONFIG_PCMCIA_AXNET is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPPOE=m
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_TSDEV=y
++CONFIG_INPUT_TSDEV_SCREEN_X=800
++CONFIG_INPUT_TSDEV_SCREEN_Y=600
++CONFIG_INPUT_EVDEV=m
++CONFIG_INPUT_EVBUG=y
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=m
++CONFIG_SERIO_SERPORT=m
++# CONFIG_SERIO_LIBPS2 is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++CONFIG_SOUND_GAMEPORT=y
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_SA1100=y
++CONFIG_SERIAL_SA1100_CONSOLE=y
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++# CONFIG_WATCHDOG is not set
++# CONFIG_NVRAM is not set
++# CONFIG_RTC is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++
++#
++# Ftape, the floppy tape device driver
++#
++# CONFIG_DRM is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++
++#
++# I2C support
++#
++# CONFIG_I2C is not set
++
++#
++# Misc devices
++#
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++
++#
++# Graphics support
++#
++CONFIG_FB=y
++# CONFIG_FB_CFB_FILLRECT is not set
++# CONFIG_FB_CFB_COPYAREA is not set
++# CONFIG_FB_CFB_IMAGEBLIT is not set
++# CONFIG_FB_SOFT_CURSOR is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++# CONFIG_FB_SA1100 is not set
++# CONFIG_FB_VIRTUAL is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++# CONFIG_MDA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FONTS is not set
++CONFIG_FONT_8x8=y
++CONFIG_FONT_8x16=y
++
++#
++# Logo configuration
++#
++CONFIG_LOGO=y
++CONFIG_LOGO_LINUX_MONO=y
++CONFIG_LOGO_LINUX_VGA16=y
++CONFIG_LOGO_LINUX_CLUT224=y
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=y
++
++#
++# Advanced Linux Sound Architecture
++#
++# CONFIG_SND is not set
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB is not set
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=m
++# CONFIG_EXT2_FS_XATTR is not set
++CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++CONFIG_JBD=m
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=m
++CONFIG_REISERFS_FS=m
++# CONFIG_REISERFS_CHECK is not set
++CONFIG_REISERFS_PROC_INFO=y
++# CONFIG_REISERFS_FS_XATTR is not set
++# CONFIG_JFS_FS is not set
++
++#
++# XFS support
++#
++# CONFIG_XFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_SYSFS=y
++CONFIG_DEVFS_FS=y
++CONFIG_DEVFS_MOUNT=y
++# CONFIG_DEVFS_DEBUG is not set
++# CONFIG_DEVPTS_FS_XATTR is not set
++# CONFIG_TMPFS is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS_FS=m
++CONFIG_JFFS_FS_VERBOSE=0
++# CONFIG_JFFS_PROC_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_NAND is not set
++# CONFIG_JFFS2_FS_NOR_ECC is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=m
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++# CONFIG_ROOT_NFS is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_MAGIC_SYSRQ is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_DEBUG_SLAB is not set
++CONFIG_DEBUG_PREEMPT=y
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_FS is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_ERRORS=y
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++# CONFIG_CRYPTO is not set
++
++#
++# Hardware crypto devices
++#
++
++#
++# Library routines
++#
++CONFIG_CRC_CCITT=m
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
+diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig linux-2.6.20/drivers/video/Kconfig
+--- linux-2.6.20.vanilla/drivers/video/Kconfig	2007-02-10 19:02:14.000000000 +0100
++++ linux-2.6.20/drivers/video/Kconfig	2007-02-11 16:39:54.000000000 +0100
+@@ -1147,6 +1147,18 @@
+ 	help
+ 	  If you have a S3 Trio say Y. Say N for S3 Virge.
+ 
++config FB_MQ200
++        bool "MQ200 Driver"
++        depends on (FB = y) && ARM && ARCH_SA1100
++        select FB_CFB_FILLRECT
++        select FB_CFB_COPYAREA
++        select FB_CFB_IMAGEBLIT
++        help
++         This is a MQ200 driver tested only on Simens SIMpads. You may need to
++         boot your SIMpad with a 2.4 SIMpad Kernel first in order to use this
++         driver. This is also needed if the SIMpad lost his power 
++         connection (empty accu or accu disconnect). 
++
+ config FB_SAVAGE
+ 	tristate "S3 Savage support"
+ 	depends on FB && PCI && EXPERIMENTAL
+diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig~ linux-2.6.20/drivers/video/Kconfig~
+--- linux-2.6.20.vanilla/drivers/video/Kconfig~	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20/drivers/video/Kconfig~	2007-02-11 16:36:10.000000000 +0100
+@@ -0,0 +1,1662 @@
++#
++# Video configuration
++#
++
++menu "Graphics support"
++
++config FIRMWARE_EDID
++       bool "Enable firmware EDID"
++       default y
++       ---help---
++         This enables access to the EDID transferred from the firmware.
++	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
++	 transfers do not work for your driver and if you are using
++	 nvidiafb, i810fb or savagefb.
++
++	 In general, choosing Y for this option is safe.  If you
++	 experience extremely long delays while booting before you get
++	 something on your display, try setting this to N.  Matrox cards in
++	 combination with certain motherboards and monitors are known to
++	 suffer from this problem.
++
++config FB
++	tristate "Support for frame buffer devices"
++	---help---
++	  The frame buffer device provides an abstraction for the graphics
++	  hardware. It represents the frame buffer of some video hardware and
++	  allows application software to access the graphics hardware through
++	  a well-defined interface, so the software doesn't need to know
++	  anything about the low-level (hardware register) stuff.
++
++	  Frame buffer devices work identically across the different
++	  architectures supported by Linux and make the implementation of
++	  application programs easier and more portable; at this point, an X
++	  server exists which uses the frame buffer device exclusively.
++	  On several non-X86 architectures, the frame buffer device is the
++	  only way to use the graphics hardware.
++
++	  The device is accessed through special device nodes, usually located
++	  in the /dev directory, i.e. /dev/fb*.
++
++	  You need an utility program called fbset to make full use of frame
++	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
++	  and the Framebuffer-HOWTO at
++	  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
++	  information.
++
++	  Say Y here and to the driver for your graphics board below if you
++	  are compiling a kernel for a non-x86 architecture.
++
++	  If you are compiling for the x86 architecture, you can say Y if you
++	  want to play with it, but it is not essential. Please note that
++	  running graphical applications that directly touch the hardware
++	  (e.g. an accelerated X server) and that are not frame buffer
++	  device-aware may cause unexpected results. If unsure, say N.
++
++config FB_DDC
++       tristate
++       depends on FB && I2C && I2C_ALGOBIT
++       default n
++
++config FB_CFB_FILLRECT
++	tristate
++	depends on FB
++	default n
++	---help---
++	  Include the cfb_fillrect function for generic software rectangle
++	  filling. This is used by drivers that don't provide their own
++	  (accelerated) version.
++
++config FB_CFB_COPYAREA
++	tristate
++	depends on FB
++	default n
++	---help---
++	  Include the cfb_copyarea function for generic software area copying.
++	  This is used by drivers that don't provide their own (accelerated)
++	  version.
++
++config FB_CFB_IMAGEBLIT
++	tristate
++	depends on FB
++	default n
++	---help---
++	  Include the cfb_imageblit function for generic software image
++	  blitting. This is used by drivers that don't provide their own
++	  (accelerated) version.
++
++config FB_MACMODES
++       tristate
++       depends on FB
++       default n
++
++config FB_BACKLIGHT
++	bool
++	depends on FB
++	select BACKLIGHT_LCD_SUPPORT
++	select BACKLIGHT_CLASS_DEVICE
++	default n
++
++config FB_MODE_HELPERS
++        bool "Enable Video Mode Handling Helpers"
++        depends on FB
++	default n
++	---help---
++	  This enables functions for handling video modes using the
++	  Generalized Timing Formula and the EDID parser. A few drivers rely
++          on this feature such as the radeonfb, rivafb, and the i810fb. If
++	  your driver does not take advantage of this feature, choosing Y will
++	  just increase the kernel size by about 5K.
++
++config FB_TILEBLITTING
++       bool "Enable Tile Blitting Support"
++       depends on FB
++       default n
++       ---help---
++         This enables tile blitting.  Tile blitting is a drawing technique
++	 where the screen is divided into rectangular sections (tiles), whereas
++	 the standard blitting divides the screen into pixels. Because the
++	 default drawing element is a tile, drawing functions will be passed
++	 parameters in terms of number of tiles instead of number of pixels.
++	 For example, to draw a single character, instead of using bitmaps,
++	 an index to an array of bitmaps will be used.  To clear or move a
++	 rectangular section of a screen, the rectangle will be described in
++	 terms of number of tiles in the x- and y-axis.
++
++	 This is particularly important to one driver, matroxfb.  If
++	 unsure, say N.
++
++config FB_CIRRUS
++	tristate "Cirrus Logic support"
++	depends on FB && (ZORRO || PCI)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  This enables support for Cirrus Logic GD542x/543x based boards on
++	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
++
++	  If you have a PCI-based system, this enables support for these
++	  chips: GD-543x, GD-544x, GD-5480.
++
++	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
++
++	  Say N unless you have such a graphics board or plan to get one
++	  before you next recompile the kernel.
++
++config FB_PM2
++	tristate "Permedia2 support"
++	depends on FB && ((AMIGA && BROKEN) || PCI)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Permedia2 AGP frame
++	  buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
++	  product page at
++	  <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
++
++config FB_PM2_FIFO_DISCONNECT
++	bool "enable FIFO disconnect feature"
++	depends on FB_PM2 && PCI
++	help
++	  Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
++
++config FB_ARMCLCD
++	tristate "ARM PrimeCell PL110 support"
++	depends on FB && ARM && ARM_AMBA
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This framebuffer device driver is for the ARM PrimeCell PL110
++	  Colour LCD controller.  ARM PrimeCells provide the building
++	  blocks for System on a Chip devices.
++
++	  If you want to compile this as a module (=code which can be
++	  inserted into and removed from the running kernel), say M
++	  here and read <file:Documentation/modules.txt>.  The module
++	  will be called amba-clcd.
++
++choice
++
++	depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
++	prompt "LCD Panel"
++	default FB_ARMCLCD_SHARP_LQ035Q7DB02
++
++config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
++	bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
++	help
++	  This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
++	  color QVGA, HRTFT panel.  The LogicPD device includes
++	  an integrated HRTFT controller IC.
++	  The native resolution is 240x320.
++
++config FB_ARMCLCD_SHARP_LQ057Q3DC02
++	bool "LogicPD LCD 5.7\" QVGA"
++	help
++	  This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
++	  color QVGA, TFT panel.  The LogicPD device includes an
++	  The native resolution is 320x240.
++
++config FB_ARMCLCD_SHARP_LQ64D343
++	bool "LogicPD LCD 6.4\" VGA"
++	help
++	  This is an implementation of the Sharp LQ64D343, a 6.4"
++	  color VGA, TFT panel.  The LogicPD device includes an
++	  The native resolution is 640x480.
++
++config FB_ARMCLCD_SHARP_LQ10D368
++	bool "LogicPD LCD 10.4\" VGA"
++	help
++	  This is an implementation of the Sharp LQ10D368, a 10.4"
++	  color VGA, TFT panel.  The LogicPD device includes an
++	  The native resolution is 640x480.
++
++
++config FB_ARMCLCD_SHARP_LQ121S1DG41
++	bool "LogicPD LCD 12.1\" SVGA"
++	help
++	  This is an implementation of the Sharp LQ121S1DG41, a 12.1"
++	  color SVGA, TFT panel.  The LogicPD device includes an
++	  The native resolution is 800x600.
++
++	  This panel requires a clock rate may be an integer fraction
++	  of the base LCDCLK frequency.  The driver will select the
++	  highest frequency available that is lower than the maximum
++	  allowed.  The panel may flicker if the clock rate is
++	  slower than the recommended minimum.
++
++config FB_ARMCLCD_AUO_A070VW01_WIDE
++	bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
++	help
++	  This is an implementation of the AU Optronics, a 7.0"
++	  WIDE Color.  The native resolution is 234x480.
++
++config FB_ARMCLCD_HITACHI
++	bool "Hitachi Wide Screen 800x480"
++	help
++	  This is an implementation of the Hitachi 800x480.
++
++endchoice
++
++
++config FB_ACORN
++	bool "Acorn VIDC support"
++	depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Acorn VIDC graphics
++	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
++	  unsure, say N.
++
++config FB_CLPS711X
++	bool "CLPS711X LCD support"
++	depends on (FB = y) && ARM && ARCH_CLPS711X
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  Say Y to enable the Framebuffer driver for the CLPS7111 and
++	  EP7212 processors.
++
++config FB_SA1100
++	bool "SA-1100 LCD support"
++	depends on (FB = y) && ARM && ARCH_SA1100
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is a framebuffer device for the SA-1100 LCD Controller.
++	  See <http://www.linux-fbdev.org/> for information on framebuffer
++	  devices.
++
++	  If you plan to use the LCD display with your SA-1100 system, say
++	  Y here.
++
++config FB_IMX
++	tristate "Motorola i.MX LCD support"
++	depends on FB && ARM && ARCH_IMX
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++
++config FB_CYBER2000
++	tristate "CyberPro 2000/2010/5000 support"
++	depends on FB && PCI && (BROKEN || !SPARC64)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This enables support for the Integraphics CyberPro 20x0 and 5000
++	  VGA chips used in the Rebel.com Netwinder and other machines.
++	  Say Y if you have a NetWinder or a graphics card containing this
++	  device, otherwise say N.
++
++config FB_APOLLO
++	bool
++	depends on (FB = y) && APOLLO
++	default y
++	select FB_CFB_FILLRECT
++	select FB_CFB_IMAGEBLIT
++
++config FB_Q40
++	bool
++	depends on (FB = y) && Q40
++	default y
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++
++config FB_AMIGA
++	tristate "Amiga native chipset support"
++	depends on FB && AMIGA
++	help
++	  This is the frame buffer device driver for the builtin graphics
++	  chipset found in Amigas.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called amifb.
++
++config FB_AMIGA_OCS
++	bool "Amiga OCS chipset support"
++	depends on FB_AMIGA
++	help
++	  This enables support for the original Agnus and Denise video chips,
++	  found in the Amiga 1000 and most A500's and A2000's. If you intend
++	  to run Linux on any of these systems, say Y; otherwise say N.
++
++config FB_AMIGA_ECS
++	bool "Amiga ECS chipset support"
++	depends on FB_AMIGA
++	help
++	  This enables support for the Enhanced Chip Set, found in later
++	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
++	  you intend to run Linux on any of these systems, say Y; otherwise
++	  say N.
++
++config FB_AMIGA_AGA
++	bool "Amiga AGA chipset support"
++	depends on FB_AMIGA
++	help
++	  This enables support for the Advanced Graphics Architecture (also
++	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
++	  and CD32. If you intend to run Linux on any of these systems, say Y;
++	  otherwise say N.
++
++config FB_CYBER
++	tristate "Amiga CyberVision 64 support"
++	depends on FB && ZORRO && BROKEN
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This enables support for the Cybervision 64 graphics card from
++	  Phase5. Please note that its use is not all that intuitive (i.e. if
++	  you have any questions, be sure to ask!). Say N unless you have a
++	  Cybervision 64 or plan to get one before you next recompile the
++	  kernel. Please note that this driver DOES NOT support the
++	  Cybervision 64/3D card, as they use incompatible video chips.
++
++config FB_VIRGE
++	bool "Amiga CyberVision 64/3D support "
++	depends on (FB = y) && ZORRO && BROKEN
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This enables support for the Cybervision 64/3D graphics card from
++	  Phase5. Please note that its use is not all that intuitive (i.e. if
++	  you have any questions, be sure to ask!). Say N unless you have a
++	  Cybervision 64/3D or plan to get one before you next recompile the
++	  kernel. Please note that this driver DOES NOT support the older
++	  Cybervision 64 card, as they use incompatible video chips.
++
++config FB_RETINAZ3
++	tristate "Amiga Retina Z3 support"
++	depends on (FB = y) && ZORRO && BROKEN
++	help
++	  This enables support for the Retina Z3 graphics card. Say N unless
++	  you have a Retina Z3 or plan to get one before you next recompile
++	  the kernel.
++
++config FB_FM2
++	bool "Amiga FrameMaster II/Rainbow II support"
++	depends on (FB = y) && ZORRO
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Amiga FrameMaster
++	  card from BSC (exhibited 1992 but not shipped as a CBM product).
++
++config FB_ARC
++	tristate "Arc Monochrome LCD board support"
++	depends on FB && X86
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This enables support for the Arc Monochrome LCD board. The board
++	  is based on the KS-108 lcd controller and is typically a matrix
++	  of 2*n chips. This driver was tested with a 128x64 panel. This
++	  driver supports it for use with x86 SBCs through a 16 bit GPIO
++	  interface (8 bit data, 8 bit control). If you anticipate using
++	  this driver, say Y or M; otherwise say N. You must specify the
++	  GPIO IO address to be used for setting control and data.
++
++config FB_ATARI
++	bool "Atari native chipset support"
++	depends on (FB = y) && ATARI && BROKEN
++	help
++	  This is the frame buffer device driver for the builtin graphics
++	  chipset found in Ataris.
++
++config FB_OF
++	bool "Open Firmware frame buffer device support"
++	depends on (FB = y) && (PPC64 || PPC_OF)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES
++	help
++	  Say Y if you want support with Open Firmware for your graphics
++	  board.
++
++config FB_CONTROL
++	bool "Apple \"control\" display support"
++	depends on (FB = y) && PPC_PMAC && PPC32
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES
++	help
++	  This driver supports a frame buffer for the graphics adapter in the
++	  Power Macintosh 7300 and others.
++
++config FB_PLATINUM
++	bool "Apple \"platinum\" display support"
++	depends on (FB = y) && PPC_PMAC && PPC32
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES
++	help
++	  This driver supports a frame buffer for the "platinum" graphics
++	  adapter in some Power Macintoshes.
++
++config FB_VALKYRIE
++	bool "Apple \"valkyrie\" display support"
++	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES
++	help
++	  This driver supports a frame buffer for the "valkyrie" graphics
++	  adapter in some Power Macintoshes.
++
++config FB_CT65550
++	bool "Chips 65550 display support"
++	depends on (FB = y) && PPC32
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Chips & Technologies
++	  65550 graphics chip in PowerBooks.
++
++config FB_ASILIANT
++	bool "Asiliant (Chips) 69000 display support"
++	depends on (FB = y) && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Asiliant 69030 chipset
++
++config FB_IMSTT
++	bool "IMS Twin Turbo display support"
++	depends on (FB = y) && PCI
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES if PPC
++	help
++	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
++	  many Macintosh and compatible computers.
++
++config FB_VGA16
++	tristate "VGA 16-color graphics support"
++	depends on FB && (X86 || PPC)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for VGA 16 color graphic
++	  cards. Say Y if you have such a card.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called vga16fb.
++
++config FB_STI
++	tristate "HP STI frame buffer device support"
++	depends on FB && PARISC
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	default y
++	---help---
++	  STI refers to the HP "Standard Text Interface" which is a set of
++	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
++	  Enabling this option will implement the linux framebuffer device
++	  using calls to the STI BIOS routines for initialisation.
++	
++	  If you enable this option, you will get a planar framebuffer device
++	  /dev/fb which will work on the most common HP graphic cards of the
++	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
++	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
++
++	  It is safe to enable this option, so you should probably say "Y".
++
++config FB_MAC
++	bool "Generic Macintosh display support"
++	depends on (FB = y) && MAC
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES
++
++#      bool '  Apple DAFB display support' CONFIG_FB_DAFB
++config FB_HP300
++	bool
++	depends on (FB = y) && HP300
++	select FB_CFB_FILLRECT
++	select FB_CFB_IMAGEBLIT
++	default y
++
++config FB_TGA
++	tristate "TGA framebuffer support"
++	depends on FB && ALPHA
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select BITREVERSE
++	help
++	  This is the frame buffer device driver for generic TGA graphic
++	  cards. Say Y if you have one of those.
++
++config FB_VESA
++	bool "VESA VGA graphics support"
++	depends on (FB = y) && X86
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select VIDEO_SELECT
++	help
++	  This is the frame buffer device driver for generic VESA 2.0
++	  compliant graphic cards. The older VESA 1.2 cards are not supported.
++	  You will get a boot time penguin logo at no additional cost. Please
++	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
++
++config FB_IMAC
++	bool "Intel-based Macintosh Framebuffer Support"
++	depends on (FB = y) && X86 && EFI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Intel-based Macintosh
++
++config FB_HGA
++	tristate "Hercules mono graphics support"
++	depends on FB && X86
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  Say Y here if you have a Hercules mono graphics card.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called hgafb.
++
++	  As this card technology is 15 years old, most people will answer N
++	  here.
++
++config FB_HGA_ACCEL
++	bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
++	depends on FB_HGA && EXPERIMENTAL
++	---help---
++	This will compile the Hercules mono graphics with
++	acceleration functions.
++
++config FB_SGIVW
++	tristate "SGI Visual Workstation framebuffer support"
++	depends on FB && X86_VISWS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  SGI Visual Workstation support for framebuffer graphics.
++
++config FB_GBE
++	bool "SGI Graphics Backend frame buffer support"
++	depends on (FB = y) && (SGI_IP32 || X86_VISWS)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++ 	help
++	  This is the frame buffer device driver for SGI Graphics Backend.
++	  This chip is used in SGI O2 and Visual Workstation 320/540.
++
++config FB_GBE_MEM
++	int "Video memory size in MB"
++	depends on FB_GBE
++	default 4
++	help
++	  This is the amount of memory reserved for the framebuffer,
++	  which can be any value between 1MB and 8MB.
++
++config FB_SUN3
++	bool "Sun3 framebuffer support"
++	depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
++
++config FB_SBUS
++	bool "SBUS and UPA framebuffers"
++	depends on (FB = y) && SPARC
++	help
++	  Say Y if you want support for SBUS or UPA based frame buffer device.
++
++config FB_BW2
++	bool "BWtwo support"
++	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the BWtwo frame buffer.
++
++config FB_CG3
++	bool "CGthree support"
++	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the CGthree frame buffer.
++
++config FB_CG6
++	bool "CGsix (GX,TurboGX) support"
++	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
++	  frame buffer.
++
++config FB_PVR2
++	tristate "NEC PowerVR 2 display support"
++	depends on FB && SH_DREAMCAST
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
++	  run linux on your Dreamcast, you will have to say Y here.
++	  This driver may or may not work on other PowerVR 2 cards, but is
++	  totally untested.  Use at your own risk.  If unsure, say N.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called pvr2fb.
++
++	  You can pass several parameters to the driver at boot time or at
++	  module load time.  The parameters look like "video=pvr2:XXX", where
++	  the meaning of XXX can be found at the end of the main source file
++	  (<file:drivers/video/pvr2fb.c>). Please see the file
++	  <file:Documentation/fb/pvr2fb.txt>.
++
++config FB_EPSON1355
++	bool "Epson 1355 framebuffer support"
++	depends on (FB = y) && (SUPERH || ARCH_CEIVA)
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  Build in support for the SED1355 Epson Research Embedded RAMDAC
++	  LCD/CRT Controller (since redesignated as the S1D13505) as a
++	  framebuffer.  Product specs at
++	  <http://www.erd.epson.com/vdc/html/products.htm>.
++
++config FB_S1D13XXX
++	tristate "Epson S1D13XXX framebuffer support"
++	depends on FB
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  Support for S1D13XXX framebuffer device family (currently only
++	  working with S1D13806). Product specs at
++	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
++
++config FB_NVIDIA
++	tristate "nVidia Framebuffer Support"
++	depends on FB && PCI
++	select I2C_ALGOBIT if FB_NVIDIA_I2C
++	select I2C if FB_NVIDIA_I2C
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select BITREVERSE
++	help
++	  This driver supports graphics boards with the nVidia chips, TNT
++	  and newer. For very old chipsets, such as the RIVA128, then use
++	  the rivafb.
++	  Say Y if you have such a graphics board.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called nvidiafb.
++
++config FB_NVIDIA_I2C
++       bool "Enable DDC Support"
++       depends on FB_NVIDIA
++       help
++	  This enables I2C support for nVidia Chipsets.  This is used
++	  only for getting EDID information from the attached display
++	  allowing for robust video mode handling and switching.
++
++	  Because fbdev-2.6 requires that drivers must be able to
++	  independently validate video mode parameters, you should say Y
++	  here.
++
++config FB_NVIDIA_BACKLIGHT
++	bool "Support for backlight control"
++	depends on FB_NVIDIA && PMAC_BACKLIGHT
++	select FB_BACKLIGHT
++	default y
++	help
++	  Say Y here if you want to control the backlight of your display.
++
++config FB_RIVA
++	tristate "nVidia Riva support"
++	depends on FB && PCI
++	select I2C_ALGOBIT if FB_RIVA_I2C
++	select I2C if FB_RIVA_I2C
++	select FB_DDC if FB_RIVA_I2C
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select BITREVERSE
++	help
++	  This driver supports graphics boards with the nVidia Riva/Geforce
++	  chips.
++	  Say Y if you have such a graphics board.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called rivafb.
++
++config FB_RIVA_I2C
++       bool "Enable DDC Support"
++       depends on FB_RIVA
++       help
++	  This enables I2C support for nVidia Chipsets.  This is used
++	  only for getting EDID information from the attached display
++	  allowing for robust video mode handling and switching.
++
++	  Because fbdev-2.6 requires that drivers must be able to
++	  independently validate video mode parameters, you should say Y
++	  here.
++
++config FB_RIVA_DEBUG
++	bool "Lots of debug output from Riva(nVidia) driver"
++	depends on FB_RIVA
++	default n
++	help
++	  Say Y here if you want the Riva driver to output all sorts
++	  of debugging information to provide to the maintainer when
++	  something goes wrong.
++
++config FB_RIVA_BACKLIGHT
++	bool "Support for backlight control"
++	depends on FB_RIVA && PMAC_BACKLIGHT
++	select FB_BACKLIGHT
++	default y
++	help
++	  Say Y here if you want to control the backlight of your display.
++
++config FB_I810
++	tristate "Intel 810/815 support (EXPERIMENTAL)"
++	depends on FB && EXPERIMENTAL && PCI && X86_32
++	select AGP
++	select AGP_INTEL
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This driver supports the on-board graphics built in to the Intel 810 
++          and 815 chipsets.  Say Y if you have and plan to use such a board.
++
++          To compile this driver as a module, choose M here: the
++	  module will be called i810fb.
++
++          For more information, please read 
++	  <file:Documentation/fb/intel810.txt>
++
++config FB_I810_GTF
++	bool "use VESA Generalized Timing Formula"
++	depends on FB_I810
++	help
++	  If you say Y, then the VESA standard, Generalized Timing Formula 
++          or GTF, will be used to calculate the required video timing values
++	  per video mode.  Since the GTF allows nondiscrete timings 
++          (nondiscrete being a range of values as opposed to discrete being a
++          set of values), you'll be able to use any combination of horizontal 
++	  and vertical resolutions, and vertical refresh rates without having
++	  to specify your own timing parameters.  This is especially useful
++	  to maximize the performance of an aging display, or if you just 
++          have a display with nonstandard dimensions. A VESA compliant 
++	  monitor is recommended, but can still work with non-compliant ones.
++	  If you need or want this, then select this option. The timings may 
++	  not be compliant with Intel's recommended values. Use at your own 
++	  risk.
++
++          If you say N, the driver will revert to discrete video timings 
++	  using a set recommended by Intel in their documentation.
++  
++          If unsure, say N.
++
++config FB_I810_I2C
++	bool "Enable DDC Support"
++	depends on FB_I810 && FB_I810_GTF
++	select I2C
++	select I2C_ALGOBIT
++	select FB_DDC
++	help
++
++config FB_INTEL
++	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
++	depends on FB && EXPERIMENTAL && PCI && X86
++	select AGP
++	select AGP_INTEL
++	select I2C_ALGOBIT if FB_INTEL_I2C
++	select I2C if FB_INTEL_I2C
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This driver supports the on-board graphics built in to the Intel
++          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
++          Say Y if you have and plan to use such a board.
++
++	  If you say Y here and want DDC/I2C support you must first say Y to
++	  "I2C support" and "I2C bit-banging support" in the character devices
++	  section.
++
++	  If you say M here then "I2C support" and "I2C bit-banging support"
++	  can be build either as modules or built-in.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called intelfb.
++
++	  For more information, please read <file:Documentation/fb/intelfb.txt>
++
++config FB_INTEL_DEBUG
++	bool "Intel driver Debug Messages"
++	depends on FB_INTEL
++	---help---
++	  Say Y here if you want the Intel driver to output all sorts
++	  of debugging information to provide to the maintainer when
++	  something goes wrong.
++
++config FB_INTEL_I2C
++	bool "DDC/I2C for Intel framebuffer support"
++	depends on FB_INTEL
++	default y
++	help
++	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
++
++config FB_MATROX
++	tristate "Matrox acceleration"
++	depends on FB && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_TILEBLITTING
++	select FB_MACMODES if PPC_PMAC
++	---help---
++	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
++	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
++	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
++	  Matrox G400, G450 or G550 card in your box.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called matroxfb.
++
++	  You can pass several parameters to the driver at boot time or at
++	  module load time. The parameters look like "video=matrox:XXX", and
++	  are described in <file:Documentation/fb/matroxfb.txt>.
++
++config FB_MATROX_MILLENIUM
++	bool "Millennium I/II support"
++	depends on FB_MATROX
++	help
++	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
++	  video card. If you select "Advanced lowlevel driver options" below,
++	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
++	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
++	  also use font widths different from 8.
++
++config FB_MATROX_MYSTIQUE
++	bool "Mystique support"
++	depends on FB_MATROX
++	help
++	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
++	  video card. If you select "Advanced lowlevel driver options" below,
++	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
++	  packed pixel and 32 bpp packed pixel. You can also use font widths
++	  different from 8.
++
++config FB_MATROX_G
++	bool "G100/G200/G400/G450/G550 support"
++	depends on FB_MATROX
++	---help---
++	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
++	  video card. If you select "Advanced lowlevel driver options", you
++	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
++	  pixel and 32 bpp packed pixel. You can also use font widths
++	  different from 8.
++
++	  If you need support for G400 secondary head, you must first say Y to
++	  "I2C support" in the character devices section, and then to
++	  "Matrox I2C support" and "G400 second head support" here in the
++	  framebuffer section. G450/G550 secondary head and digital output
++	  are supported without additional modules.
++
++	  The driver starts in monitor mode. You must use the matroxset tool 
++	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
++	  swap primary and secondary head outputs, or to change output mode.  
++	  Secondary head driver always start in 640x480 resolution and you 
++	  must use fbset to change it.
++
++	  Do not forget that second head supports only 16 and 32 bpp
++	  packed pixels, so it is a good idea to compile them into the kernel
++	  too. You can use only some font widths, as the driver uses generic
++	  painting procedures (the secondary head does not use acceleration
++	  engine).
++
++	  G450/G550 hardware can display TV picture only from secondary CRTC,
++	  and it performs no scaling, so picture must have 525 or 625 lines.
++
++config FB_MATROX_I2C
++	tristate "Matrox I2C support"
++	depends on FB_MATROX && I2C
++	select I2C_ALGOBIT
++	---help---
++	  This drivers creates I2C buses which are needed for accessing the
++	  DDC (I2C) bus present on all Matroxes, an I2C bus which
++	  interconnects Matrox optional devices, like MGA-TVO on G200 and
++	  G400, and the secondary head DDC bus, present on G400 only.
++
++	  You can say Y or M here if you want to experiment with monitor
++	  detection code. You must say Y or M here if you want to use either
++	  second head of G400 or MGA-TVO on G200 or G400.
++
++	  If you compile it as module, it will create a module named
++	  i2c-matroxfb.
++
++config FB_MATROX_MAVEN
++	tristate "G400 second head support"
++	depends on FB_MATROX_G && FB_MATROX_I2C
++	---help---
++	  WARNING !!! This support does not work with G450 !!!
++
++	  Say Y or M here if you want to use a secondary head (meaning two
++	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
++	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
++	  secondary head output is blanked while you are in X. With XFree
++	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
++	  the fbdev driver on first head and the fbdev driver on second head.
++
++	  If you compile it as module, two modules are created,
++	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
++	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
++	  also load i2c-matroxfb to get it to run.
++
++	  The driver starts in monitor mode and you must use the matroxset
++	  tool (available at
++	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
++	  PAL or NTSC or to swap primary and secondary head outputs.
++	  Secondary head driver also always start in 640x480 resolution, you
++	  must use fbset to change it.
++
++	  Also do not forget that second head supports only 16 and 32 bpp
++	  packed pixels, so it is a good idea to compile them into the kernel
++	  too.  You can use only some font widths, as the driver uses generic
++	  painting procedures (the secondary head does not use acceleration
++	  engine).
++
++config FB_MATROX_MULTIHEAD
++	bool "Multihead support"
++	depends on FB_MATROX
++	---help---
++	  Say Y here if you have more than one (supported) Matrox device in
++	  your computer and you want to use all of them for different monitors
++	  ("multihead"). If you have only one device, you should say N because
++	  the driver compiled with Y is larger and a bit slower, especially on
++	  ia32 (ix86).
++
++	  If you said M to "Matrox unified accelerated driver" and N here, you
++	  will still be able to use several Matrox devices simultaneously:
++	  insert several instances of the module matroxfb into the kernel
++	  with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
++	  for the different Matrox devices. This method is slightly faster but
++	  uses 40 KB of kernel memory per Matrox card.
++
++	  There is no need for enabling 'Matrox multihead support' if you have
++	  only one Matrox card in the box.
++
++config FB_RADEON
++	tristate "ATI Radeon display support"
++	depends on FB && PCI
++	select I2C_ALGOBIT if FB_RADEON_I2C
++	select I2C if FB_RADEON_I2C
++	select FB_DDC if FB_RADEON_I2C
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES if PPC_OF
++	help
++	  Choose this option if you want to use an ATI Radeon graphics card as
++	  a framebuffer device.  There are both PCI and AGP versions.  You
++	  don't need to choose this to run the Radeon in plain VGA mode.
++
++	  If you say Y here and want DDC/I2C support you must first say Y to
++	  "I2C support" and "I2C bit-banging support" in the character devices
++	  section.
++
++	  If you say M here then "I2C support" and "I2C bit-banging support" 
++	  can be build either as modules or built-in.
++
++	  There is a product page at
++	  http://apps.ati.com/ATIcompare/
++
++config FB_RADEON_I2C
++	bool "DDC/I2C for ATI Radeon support"
++	depends on FB_RADEON
++	default y
++	help
++	  Say Y here if you want DDC/I2C support for your Radeon board. 
++
++config FB_RADEON_BACKLIGHT
++	bool "Support for backlight control"
++	depends on FB_RADEON && PMAC_BACKLIGHT
++	select FB_BACKLIGHT
++	default y
++	help
++	  Say Y here if you want to control the backlight of your display.
++
++config FB_RADEON_DEBUG
++	bool "Lots of debug output from Radeon driver"
++	depends on FB_RADEON
++	default n
++	help
++	  Say Y here if you want the Radeon driver to output all sorts
++	  of debugging information to provide to the maintainer when
++	  something goes wrong.
++
++config FB_ATY128
++	tristate "ATI Rage128 display support"
++	depends on FB && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES if PPC_PMAC
++	help
++	  This driver supports graphics boards with the ATI Rage128 chips.
++	  Say Y if you have such a graphics board and read
++	  <file:Documentation/fb/aty128fb.txt>.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called aty128fb.
++
++config FB_ATY128_BACKLIGHT
++	bool "Support for backlight control"
++	depends on FB_ATY128 && PMAC_BACKLIGHT
++	select FB_BACKLIGHT
++	default y
++	help
++	  Say Y here if you want to control the backlight of your display.
++
++config FB_ATY
++	tristate "ATI Mach64 display support" if PCI || ATARI
++	depends on FB && !SPARC32
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	select FB_MACMODES if PPC
++	help
++	  This driver supports graphics boards with the ATI Mach64 chips.
++	  Say Y if you have such a graphics board.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called atyfb.
++
++config FB_ATY_CT
++	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
++	depends on PCI && FB_ATY
++	default y if SPARC64 && FB_PCI
++	help
++	  Say Y here to support use of ATI's 64-bit Rage boards (or other
++	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
++	  framebuffer device.  The ATI product support page for these boards
++	  is at <http://support.ati.com/products/pc/mach64/>.
++
++config FB_ATY_GENERIC_LCD
++	bool "Mach64 generic LCD support (EXPERIMENTAL)"
++	depends on FB_ATY_CT
++	help
++	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
++	  Rage XC, or Rage XL chipset.
++
++config FB_ATY_GX
++	bool "Mach64 GX support" if PCI
++	depends on FB_ATY
++	default y if ATARI
++	help
++	  Say Y here to support use of the ATI Mach64 Graphics Expression
++	  board (or other boards based on the Mach64 GX chipset) as a
++	  framebuffer device.  The ATI product support page for these boards
++	  is at
++	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
++
++config FB_ATY_BACKLIGHT
++	bool "Support for backlight control"
++	depends on FB_ATY && PMAC_BACKLIGHT
++	select FB_BACKLIGHT
++	default y
++	help
++	  Say Y here if you want to control the backlight of your display.
++
++config FB_S3TRIO
++	bool "S3 Trio display support"
++	depends on (FB = y) && PPC && BROKEN
++	help
++	  If you have a S3 Trio say Y. Say N for S3 Virge.
++
++config FB_SAVAGE
++	tristate "S3 Savage support"
++	depends on FB && PCI && EXPERIMENTAL
++	select I2C_ALGOBIT if FB_SAVAGE_I2C
++	select I2C if FB_SAVAGE_I2C
++	select FB_DDC if FB_SAVAGE_I2C
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This driver supports notebooks and computers with S3 Savage PCI/AGP
++	  chips.
++
++	  Say Y if you have such a graphics card.
++
++	  To compile this driver as a module, choose M here; the module
++	  will be called savagefb.
++
++config FB_SAVAGE_I2C
++       bool "Enable DDC2 Support"
++       depends on FB_SAVAGE
++       help
++	  This enables I2C support for S3 Savage Chipsets.  This is used
++	  only for getting EDID information from the attached display
++	  allowing for robust video mode handling and switching.
++
++	  Because fbdev-2.6 requires that drivers must be able to
++	  independently validate video mode parameters, you should say Y
++	  here.
++
++config FB_SAVAGE_ACCEL
++       bool "Enable Console Acceleration"
++       depends on FB_SAVAGE
++       default n
++       help
++          This option will compile in console acceleration support. If
++          the resulting framebuffer console has bothersome glitches, then
++          choose N here.
++
++config FB_SIS
++	tristate "SiS/XGI display support"
++	depends on FB && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the SiS 300, 315, 330
++	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
++	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
++
++	  To compile this driver as a module, choose M here; the module
++	  will be called sisfb.
++
++config FB_SIS_300
++	bool "SiS 300 series support"
++	depends on FB_SIS
++	help
++	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
++
++config FB_SIS_315
++	bool "SiS 315/330/340 series and XGI support"
++	depends on FB_SIS
++	help
++	  Say Y here to support use of the SiS 315, 330 and 340 series
++	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
++	  as XGI V3XT, V5, V8 and Z7.
++
++config FB_NEOMAGIC
++	tristate "NeoMagic display support"
++	depends on FB && PCI
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This driver supports notebooks with NeoMagic PCI chips.
++	  Say Y if you have such a graphics card. 
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called neofb.
++
++config FB_KYRO
++	tristate "IMG Kyro support"
++	depends on FB && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
++	  graphics board.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called kyrofb.
++
++config FB_3DFX
++	tristate "3Dfx Banshee/Voodoo3 display support"
++	depends on FB && PCI
++	select FB_CFB_IMAGEBLIT
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	help
++	  This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
++	  chips. Say Y if you have such a graphics board.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called tdfxfb.
++
++config FB_3DFX_ACCEL
++	bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
++	depends on FB_3DFX && EXPERIMENTAL
++	---help---
++	This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
++	with acceleration functions.
++
++
++config FB_VOODOO1
++	tristate "3Dfx Voodoo Graphics (sst1) support"
++	depends on FB && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
++	  Voodoo2 (cvg) based graphics card.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called sstfb.
++
++	  WARNING: Do not use any application that uses the 3D engine
++	  (namely glide) while using this driver.
++	  Please read the <file:Documentation/fb/README-sstfb.txt> for supported
++	  options and other important info  support.
++
++config FB_CYBLA
++	tristate "Cyberblade/i1 support"
++	depends on FB && PCI && X86_32 && !64BIT
++	select FB_CFB_IMAGEBLIT
++	select VIDEO_SELECT
++	---help---
++	  This driver is supposed to support the Trident Cyberblade/i1
++	  graphics core integrated in the VIA VT8601A North Bridge,
++	  also known as VIA Apollo PLE133.
++
++	  Status:
++	   - Developed, tested and working on EPIA 5000 and EPIA 800.
++	   - Does work reliable on all systems with CRT/LCD connected to
++	     normal VGA ports.
++	   - Should work on systems that do use the internal LCD port, but
++	     this is absolutely not tested.
++
++	  Character imageblit, copyarea and rectangle fill are hw accelerated,
++	  ypan scrolling is used by default.
++
++	  Please do read <file:Documentation/fb/cyblafb/*>.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called cyblafb.
++
++config FB_TRIDENT
++	tristate "Trident support"
++	depends on FB && PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  This driver is supposed to support graphics boards with the
++	  Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
++	  but also on some motherboards. For more information, read
++	  <file:Documentation/fb/tridentfb.txt>
++
++	  Cyberblade/i1 support will be removed soon, use the cyblafb driver
++	  instead.
++
++	  Say Y if you have such a graphics board.
++
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called tridentfb.
++
++config FB_TRIDENT_ACCEL
++	bool "Trident Acceleration functions (EXPERIMENTAL)"
++	depends on FB_TRIDENT && EXPERIMENTAL
++	---help---
++	This will compile the Trident frame buffer device with
++	acceleration functions.
++
++config FB_PM3
++	tristate "Permedia3 support"
++	depends on FB && PCI && BROKEN
++	help
++	  This is the frame buffer device driver for the 3DLabs Permedia3
++	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
++	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
++	  and maybe other boards.
++
++config FB_AU1100
++	bool "Au1100 LCD Driver"
++	depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
++
++config FB_AU1200
++	bool "Au1200 LCD Driver"
++	depends on FB && MIPS && SOC_AU1200
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the framebuffer driver for the AMD Au1200 SOC.  It can drive
++	  various panels and CRTs by passing in kernel cmd line option
++	  au1200fb:panel=<name>.
++
++source "drivers/video/geode/Kconfig"
++
++config FB_FFB
++	bool "Creator/Creator3D/Elite3D support"
++	depends on FB_SBUS && SPARC64
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Creator, Creator3D,
++	  and Elite3D graphics boards.
++
++config FB_TCX
++	bool "TCX (SS4/SS5 only) support"
++	depends on FB_SBUS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the TCX 24/8bit frame
++	  buffer.
++
++config FB_CG14
++	bool "CGfourteen (SX) support"
++	depends on FB_SBUS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the CGfourteen frame
++	  buffer on Desktop SPARCsystems with the SX graphics option.
++
++config FB_P9100
++	bool "P9100 (Sparcbook 3 only) support"
++	depends on FB_SBUS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the P9100 card
++	  supported on Sparcbook 3 machines.
++
++config FB_LEO
++	bool "Leo (ZX) support"
++	depends on FB_SBUS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the SBUS-based Sun ZX
++	  (leo) frame buffer cards.
++
++config FB_PCI
++	bool "PCI framebuffers"
++	depends on (FB = y) && PCI && SPARC
++
++config FB_IGA
++	bool "IGA 168x display support"
++	depends on SPARC32 && FB_PCI
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the framebuffer device for the INTERGRAPHICS 1680 and
++	  successor frame buffer cards.
++
++config FB_HIT
++	tristate "HD64461 Frame Buffer support"
++	depends on FB && HD64461
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is the frame buffer device driver for the Hitachi HD64461 LCD
++	  frame buffer card.
++
++config FB_PMAG_AA
++	bool "PMAG-AA TURBOchannel framebuffer support"
++	depends on (FB = y) && TC
++ 	select FB_CFB_FILLRECT
++ 	select FB_CFB_COPYAREA
++ 	select FB_CFB_IMAGEBLIT
++	help
++	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
++	  used mainly in the MIPS-based DECstation series.
++
++config FB_PMAG_BA
++	bool "PMAG-BA TURBOchannel framebuffer support"
++	depends on (FB = y) && TC
++ 	select FB_CFB_FILLRECT
++ 	select FB_CFB_COPYAREA
++ 	select FB_CFB_IMAGEBLIT
++	help
++	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
++	  used mainly in the MIPS-based DECstation series.
++
++config FB_PMAGB_B
++	bool "PMAGB-B TURBOchannel framebuffer support"
++	depends on (FB = y) && TC
++ 	select FB_CFB_FILLRECT
++ 	select FB_CFB_COPYAREA
++ 	select FB_CFB_IMAGEBLIT
++	help
++	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
++	  in the MIPS-based DECstation series. The card is currently only
++	  supported in 1280x1024x8 mode.
++
++config FB_MAXINE
++	bool "Maxine (Personal DECstation) onboard framebuffer support"
++	depends on (FB = y) && MACH_DECSTATION
++ 	select FB_CFB_FILLRECT
++ 	select FB_CFB_COPYAREA
++ 	select FB_CFB_IMAGEBLIT
++	help
++	  Support for the onboard framebuffer (1024x768x8) in the Personal
++	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
++	  Codename "Maxine").
++
++config FB_TX3912
++	bool "TMPTX3912/PR31700 frame buffer support"
++	depends on (FB = y) && NINO
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
++	  see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
++
++	  Say Y here to enable kernel support for the on-board framebuffer.
++
++config FB_G364
++	bool "G364 frame buffer support"
++	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
++ 	select FB_CFB_FILLRECT
++ 	select FB_CFB_COPYAREA
++ 	select FB_CFB_IMAGEBLIT
++	help
++	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
++	  Olivetti M700-10 systems.
++
++config FB_68328
++	bool "Motorola 68328 native frame buffer support"
++	depends on FB && (M68328 || M68EZ328 || M68VZ328)
++ 	select FB_CFB_FILLRECT
++ 	select FB_CFB_COPYAREA
++ 	select FB_CFB_IMAGEBLIT
++	help
++	  Say Y here if you want to support the built-in frame buffer of
++	  the Motorola 68328 CPU family.
++
++config FB_PXA
++	tristate "PXA LCD framebuffer support"
++	depends on FB && ARCH_PXA
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  Frame buffer driver for the built-in LCD controller in the Intel
++	  PXA2x0 processor.
++
++	  This driver is also available as a module ( = code which can be
++	  inserted and removed from the running kernel whenever you want). The
++	  module will be called pxafb. If you want to compile it as a module,
++	  say M here and read <file:Documentation/modules.txt>.
++
++	  If unsure, say N.
++
++config FB_PXA_PARAMETERS
++	bool "PXA LCD command line parameters"
++	default n
++	depends on FB_PXA
++	---help---
++	  Enable the use of kernel command line or module parameters
++	  to configure the physical properties of the LCD panel when
++	  using the PXA LCD driver.
++
++	  This option allows you to override the panel parameters
++	  supplied by the platform in order to support multiple
++	  different models of flatpanel. If you will only be using a
++	  single model of flatpanel then you can safely leave this
++	  option disabled.
++
++	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
++
++config FB_MBX
++	tristate "2700G LCD framebuffer support"
++	depends on FB && ARCH_PXA
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
++	  Accelerator
++
++config FB_MBX_DEBUG
++       bool "Enable debugging info via debugfs"
++       depends on FB_MBX && DEBUG_FS
++       default n
++       ---help---
++         Enable this if you want debugging information using the debug
++         filesystem (debugfs)
++
++         If unsure, say N.
++
++config FB_W100
++	tristate "W100 frame buffer support"
++	depends on FB && PXA_SHARPSL
++ 	select FB_CFB_FILLRECT
++ 	select FB_CFB_COPYAREA
++ 	select FB_CFB_IMAGEBLIT
++	---help---
++	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
++
++	  This driver is also available as a module ( = code which can be
++	  inserted and removed from the running kernel whenever you want). The
++	  module will be called w100fb. If you want to compile it as a module,
++	  say M here and read <file:Documentation/modules.txt>.
++
++	  If unsure, say N.
++
++config FB_S3C2410
++	tristate "S3C2410 LCD framebuffer support"
++	depends on FB && ARCH_S3C2410
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  Frame buffer driver for the built-in LCD controller in the Samsung
++	  S3C2410 processor.
++
++	  This driver is also available as a module ( = code which can be
++	  inserted and removed from the running kernel whenever you want). The
++	  module will be called s3c2410fb. If you want to compile it as a module,
++	  say M here and read <file:Documentation/modules.txt>.
++
++	  If unsure, say N.
++config FB_S3C2410_DEBUG
++	bool "S3C2410 lcd debug messages"
++	depends on FB_S3C2410
++	help
++	  Turn on debugging messages. Note that you can set/unset at run time
++	  through sysfs
++
++config FB_PNX4008_DUM
++	tristate "Display Update Module support on Philips PNX4008 board"
++	depends on FB && ARCH_PNX4008
++	---help---
++	  Say Y here to enable support for PNX4008 Display Update Module (DUM)
++
++config FB_PNX4008_DUM_RGB
++	tristate "RGB Framebuffer support on Philips PNX4008 board"
++	depends on FB_PNX4008_DUM
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  Say Y here to enable support for PNX4008 RGB Framebuffer
++
++config FB_IBM_GXT4500
++	tristate "Framebuffer support for IBM GXT4500P adaptor"
++	depends on PPC
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  Say Y here to enable support for the IBM GXT4500P display
++	  adaptor, found on some IBM System P (pSeries) machines.
++
++config FB_VIRTUAL
++	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
++	depends on FB
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	---help---
++	  This is a `virtual' frame buffer device. It operates on a chunk of
++	  unswappable kernel memory instead of on the memory of a graphics
++	  board. This means you cannot see any output sent to this frame
++	  buffer device, while it does consume precious memory. The main use
++	  of this frame buffer device is testing and debugging the frame
++	  buffer subsystem. Do NOT enable it for normal systems! To protect
++	  the innocent, it has to be enabled explicitly at boot time using the
++	  kernel option `video=vfb:'.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called vfb. In order to load it, you must use
++	  the vfb_enable=1 option.
++
++	  If unsure, say N.
++if VT
++	source "drivers/video/console/Kconfig"
++endif
++
++if FB || SGI_NEWPORT_CONSOLE
++	source "drivers/video/logo/Kconfig"
++endif
++
++if SYSFS
++	source "drivers/video/backlight/Kconfig"
++endif
++
++endmenu
++
+diff -uNr linux-2.6.20.vanilla/drivers/video/Makefile linux-2.6.20/drivers/video/Makefile
+--- linux-2.6.20.vanilla/drivers/video/Makefile	2007-02-10 19:02:14.000000000 +0100
++++ linux-2.6.20/drivers/video/Makefile	2007-02-11 16:40:07.000000000 +0100
+@@ -30,6 +30,7 @@
+ obj-$(CONFIG_FB_PM2)              += pm2fb.o
+ obj-$(CONFIG_FB_PM3)		  += pm3fb.o
+ 
++obj-$(CONFIG_FB_MQ200)            += mq200/
+ obj-$(CONFIG_FB_MATROX)		  += matrox/
+ obj-$(CONFIG_FB_RIVA)		  += riva/ vgastate.o
+ obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
+diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/Makefile linux-2.6.20/drivers/video/mq200/Makefile
+--- linux-2.6.20.vanilla/drivers/video/mq200/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20/drivers/video/mq200/Makefile	2007-02-11 16:41:44.000000000 +0100
+@@ -0,0 +1,6 @@
++# Makefile for mq200 video driver
++# 4 Aug 2003, Holger Hans Peter Freyther
++# 2 Jan 2007, mr nice
++
++obj-$(CONFIG_FB_MQ200)           += mq_skeleton.o mq_external.o
++
+diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq200_data.h linux-2.6.20/drivers/video/mq200/mq200_data.h
+--- linux-2.6.20.vanilla/drivers/video/mq200/mq200_data.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20/drivers/video/mq200/mq200_data.h	2007-02-11 16:41:09.000000000 +0100
+@@ -0,0 +1,893 @@
++/*
++ * From ucLinux mq200fb.c and mq200fb.h
++ */
++
++#ifndef __MQ200_FB_H__
++#define __MQ200_FB_H__
++
++struct mq200_io_regions {
++	u32 fb_size;                    /* framebuffer size                  */
++	unsigned long phys_mmio_base;   /* physical register memory base     */
++	unsigned long virt_mmio_base;    /* virtual start of registers       */
++	unsigned long phys_fb_base;     /* physical address of frame buffer  */
++	unsigned long virt_fb_base;     /* virtual start of the framebuffer  */
++};
++
++#define MQ200_MONITOR_HORI_RES(info)    info->monitor_info.horizontal_res
++#define MQ200_MONITOR_VERT_RES(info)    info->monitor_info.vertical_res
++#define MQ200_MONITOR_DEPTH(info)       info->monitor_info.depth
++#define MQ200_MONITOR_LINE_LENGTH(info) info->monitor_info.line_length
++
++struct mq200_monitor_info {
++	unsigned int horizontal_res;
++	unsigned int vertical_res;
++	unsigned int depth;
++	unsigned int refresh;
++	unsigned int line_length;
++	unsigned long flags;
++};
++
++
++/**
++ * Addresses of Module
++ */
++#define MQ200_FB_BASE  (x) (x + 0x1800000) /* framebuffer */
++#define MQ200_FB_SIZE      0x200000 /* framebuffer size in bytes */
++#define MQ200_REGS_BASE(x) (x + 0x1e00000) /* start of registers area */
++#define MQ200_REGS_SIZE    0x200000 /* registers area size */
++
++#define PMU_OFFSET 0x00000     /* power management */
++#define CPU_OFFSET 0x02000     /* CPU interface */
++#define MIU_OFFSET 0x04000     /* memory controller */
++#define IN_OFFSET  0x08000     /* interrupt controller */
++#define GC_OFFSET  0x0a000     /* graphics controller 1&2 */
++#define GE_OFFSET  0x0c000     /* graphics engine */
++#define FPI_OFFSET 0x0e000     /* flat panel controller */
++#define CP1_OFFSET 0x10000     /* color palette 1 */
++#define DC_OFFSET  0x14000     /* device configuration */
++#define PCI_OFFSET 0x16000     /* PCI configuration */
++#define PSF_OFFSET 0x18000     /* ??? */
++
++
++/****
++ * Registers
++ */
++
++/* power management unit */
++#define PMR(addr) (addr + PCI_OFFSET + 0x40)/* power management
++					     register */
++#define PMR_VALUE 0x06210001   /* expected read value of PMR register */
++#define PM00R(addr) (addr + PMU_OFFSET + 0x00) /* power management unit
++						configuration
++						register */
++#define PM01R(addr) (addr + PMU_OFFSET + 0x04) /* D1 state control */
++#define PM02R(addr) (addr + PMU_OFFSET + 0x08) /* d2 state control */
++#define PM06R(addr) (addr + PMU_OFFSET + 0x18) /* PLL 2 programming */
++#define PM07R(addr) (addr + PMU_OFFSET + 0x1c) /* PLL 3 programming */
++
++#define PMCSR(addr) (addr + PCI_OFFSET + 0x44) /* power management
++						  control/status
++						  register */
++
++/* memory interface unit */
++#define MM00R(addr) (addr + MIU_OFFSET + 0x00)/* MIU interface control
++						  0 */
++#define MM01R(addr) (addr + MIU_OFFSET + 0x04) /* MIU interface control
++						  1 */
++#define MM02R(addr) (addr + MIU_OFFSET + 0x08) /* memory interface
++						  control 2 */
++#define MM03R(addr) (addr + MIU_OFFSET + 0x0c) /* memory interface
++						  control 3 */
++#define MM04R(addr) (addr + MIU_OFFSET + 0x10) /* memory interface
++						  control 4 */
++/* graphics controller 1 module */
++#define GC00R(addr) (addr + GC_OFFSET + 0x00) /* graphics controller 1
++                                                 control */
++#define GC01R(addr) (addr + GC_OFFSET + 0x04) /* graphics controller
++                                                 CRT control */
++#define GC02R(addr) (addr + GC_OFFSET + 0x08) /* horizontal display 1
++                                                 control */
++#define GC03R(addr) (addr + GC_OFFSET + 0x0c) /* vertical display 1
++                                                 control */
++#define GC04R(addr) (addr + GC_OFFSET + 0x10) /* horizontal sync 1
++                                                 control */
++#define GC05R(addr) (addr + GC_OFFSET + 0x14) /* vertical sync 1
++                                                 control */
++#define GC07R(addr) (addr + GC_OFFSET + 0x1c) /* vertical display 1
++                                                 count */
++#define GC08R(addr) (addr + GC_OFFSET + 0x20) /* horizontal window 1
++                                                 control */
++#define GC09R(addr) (addr + GC_OFFSET + 0x24) /* vertical window 1
++                                                 control */
++#define GC0AR(addr) (addr + GC_OFFSET + 0x28) /* alternate horizontal
++                                                 window 1 control */
++#define GC0BR(addr) (addr + GC_OFFSET + 0x2c) /* alternate vertical
++                                                 window 1 control */
++#define GC0CR(addr) (addr + GC_OFFSET + 0x30) /* window 1 
++                                                 start address */
++#define GC0DR(addr) (addr + GC_OFFSET + 0x34) /* alternate window 1
++                                                 start address */
++#define GC0ER(addr) (addr + GC_OFFSET + 0x38) /* window 1 stride */
++#define GC0FR(addr) (addr + GC_OFFSET + 0x3c) /* reserved */
++#define GC10R(addr) (addr + GC_OFFSET + 0x40) /* hardware cursor 1
++                                                 position */
++#define GC11R(addr) (addr + GC_OFFSET + 0x44) /* hardware cursor 1
++                                                 start address and
++                                                 offset */
++#define GC12R(addr) (addr + GC_OFFSET + 0x48) /* hardware cursor 1
++                                                 foreground color */
++#define GC13R(addr) (addr + GC_OFFSET + 0x4c) /* hardware cursor 1
++                                                 background color */
++/* graphics engine */
++#define ROP_SRCCOPY     0xCC    /* dest = source */
++#define ROP_SRCPAINT    0xEE    /* dest = source OR dest */
++#define ROP_SRCAND      0x88    /* dest = source AND dest */
++#define ROP_SRCINVERT   0x66    /* dest = source XOR dest */
++#define ROP_SRCERASE    0x44    /* dest = source AND (NOT dest) */
++#define ROP_NOTSRCCOPY  0x33    /* dest = NOT source */
++#define ROP_NOTSRCERASE 0x11    /* dest = (NOT source) AND (NOT dest) */
++#define ROP_MERGECOPY   0xC0    /* dest = source AND pattern */
++#define ROP_MERGEPAINT  0xBB    /* dest = (NOT source) OR dest */
++#define ROP_PATCOPY     0xF0    /* dest = pattern */
++#define ROP_PATPAINT    0xFB    /* dest = DPSnoo */
++#define ROP_PATINVERT   0x5A    /* dest = pattern XOR dest */
++#define ROP_DSTINVERT   0x55    /* dest = NOT dest */
++#define ROP_BLACKNESS   0x00    /* dest = BLACK */
++#define ROP_WHITENESS   0xFF    /* dest = WHITE */
++
++#define GE00R(addr) (addr + GE_OFFSET + 0x00) /* primary drawing command
++						 register */
++#define GE01R(addr) (addr + GE_OFFSET + 0x04) /* primary width and
++						 height register */
++#define GE02R(addr) (addr + GE_OFFSET + 0x08) /* primary destination
++						 address register */
++#define GE03R(addr) (addr + GE_OFFSET + 0x0c) /* primary source XY
++						 register */
++#define GE04R(addr) (addr + GE_OFFSET + 0x10) /* primary color compare
++						 register */
++#define GE05R(addr) (addr + GE_OFFSET + 0x14) /* primary clip left/top
++						 register */
++#define GE06R(addr) (addr + GE_OFFSET + 0x18) /* primary clip
++						 right/bottom register
++                                                  */
++#define GE07R(addr) (addr + GE_OFFSET + 0x1c) /* primary source and
++						 pattern offset
++						 register */
++#define GE08R(addr) (addr + GE_OFFSET + 0x20) /* primary foreground
++						 color
++						 register/rectangle
++						 fill register */
++#define GE09R(addr) (addr + GE_OFFSET + 0x24) /* source stride/offset
++						 register */
++#define GE0AR(addr) (addr + GE_OFFSET + 0x28) /* destination stride
++						 register and color
++						 depth */
++#define GE0BR(addr) (addr + GE_OFFSET + 0x2c) /* image base address
++						 register */
++#define GE40R(addr) (addr + GE_OFFSET + 0x100) /* mono pattern register
++						  0 */
++#define GE41R(addr) (addr + GE_OFFSET + 0x104) /* mono pattern register
++						  1 */
++#define GE42R(addr) (addr + GE_OFFSET + 0x108) /* foreground color
++						  register */
++#define GE43R(addr) (addr + GE_OFFSET + 0x10c) /* background color
++                                                  register */
++/* color palette */
++#define C1xxR(addr, regno) \
++       (addr + CP1_OFFSET + (regno) * 4) /* graphics controller color
++					    palette 1 */
++/* device configuration */
++#define DC00R(addr) (addr + DC_OFFSET + 0x00)  /* device configuration
++						  register 0 */
++#define DC_RESET 0x4000
++/* PCI configuration space */
++#define PC00R(addr) (addr + PCI_OFFSET + 0x00)/* device ID/vendor ID
++						 register */
++/* Flatpanel Control */
++#define FP00R(addr) (addr + FPI_OFFSET + 0x00) /* Flat Panel Control 0       */
++#define FP01R(addr) (addr + FPI_OFFSET + 0x04) /* Flat Panel Output Pin      */
++#define FP02R(addr) (addr + FPI_OFFSET + 0x08) /* Flat Panel Gener Purpose
++						  Outout Control Register    */
++#define FP03R(addr) (addr + FPI_OFFSET + 0x0c) /* General Purpose I/O Port
++						  Control Register           */
++#define FP04R(addr) (addr + FPI_OFFSET + 0x10) /* STN Panel Control Register */
++#define FP05R(addr) (addr + FPI_OFFSET + 0x14) /* D-STN Half Frame Buffer
++						  Control Register -By Guess */
++#define FP0FR(addr) (addr + FPI_OFFSET + 0x3c) /* Pulse Width Modulation
++						  Control Register           */
++#define FRCTL_PATTERN_COUNT 32
++#define FP10R(addr) (addr + FPI_OFFSET + 0x40) /* Frame-Rate Control Pattern
++						  Register */
++#define FP11R(addr) (addr + FPI_OFFSET + 0x44)
++#define FP2FR(addr) (addr + FPI_OFFSET + 0xc0) /* Frame-Rate Control Weight
++						  Registers */
++
++
++
++
++/* power management miscellaneous control */
++union pm00r {
++    struct {
++       u32 pll1_n_b5   :1;     /* PLL 1 N parameter bit 5 is 0 */
++       u32 reserved_1  :1;
++       u32 pll2_enbl   :1;     /* PLL 2 enable */
++       u32 pll3_enbl   :1;     /* PLL 3 enable */
++       u32 reserved_2  :1;
++       u32 pwr_st_ctrl :1;     /* power state status control */
++       u32 reserved_3  :2;
++
++       u32 ge_enbl     :1;     /* graphics engine enable */
++       u32 ge_bsy_gl   :1;     /* graphics engine force busy (global) */
++       u32 ge_bsy_lcl  :1;     /* graphics engine force busy (local) */
++       u32 ge_clock    :2;     /* graphics engine clock select */
++       u32 ge_cmd_fifo :1;     /* graphics engine command FIFO reset */
++       u32 ge_src_fifo :1;     /* graphics engine CPU source FIFO reset */
++       u32 miu_pwr_seq :1;     /* memory interface unit power sequencing
++                                  enable */
++
++       u32 d3_mem_rfsh :1;     /* D3 memory refresh */
++       u32 d4_mem_rfsh :1;     /* D4 memory refresh */
++       u32 gpwr_intrvl :2;     /* general power sequencing interval */
++       u32 fppwr_intrvl:2;     /* flat panel power sequencing interval */
++       u32 gpwr_seq_ctr:1;     /* general power sequencing interval control */
++       u32 pmu_tm      :1;     /* PMU test mode */
++
++       u32 pwr_state   :2;     /* power state (read only) */
++       u32 pwr_seq_st  :1;     /* power sequencing active status (read
++                                  only) */
++       u32 reserved_4  :5;
++    }  part;
++    u32 whole;
++};
++
++/* D1 state control */
++union pm01r {
++    struct {
++       u32 osc_enbl    :1;     /* D1 oscillator enable */
++       u32 pll1_enbl   :1;     /* D1 PLL 1 enable */
++       u32 pll2_enbl   :1;     /* D1 PLL 2 enable */
++       u32 pll3_enbl   :1;     /* D1 PLL 3 enable */
++       u32 miu_enbl    :1;     /* D1 Memory Interface Unit (MIU) enable */
++       u32 mem_rfsh    :1;     /* D1 memory refresh enable */
++       u32 ge_enbl     :1;     /* D1 Graphics Engine (GE) enable */
++       u32 reserved_1  :1;
++
++       u32 crt_enbl    :1;     /* D1 CRT enable */
++       u32 fpd_enbl    :1;     /* D1 Flat Panel enable */
++       u32 reserved_2  :6;
++
++       u32 ctl1_enbl   :1;     /* D1 controller 1 enable */
++       u32 win1_enbl   :1;     /* D1 window 1 enable */
++       u32 awin1_enbl  :1;     /* D1 alternate window 1 enable */
++       u32 cur1_enbl   :1;     /* D1 cursor 1 enable */
++      u32 reserved_3  :4;
++
++       u32 ctl2_enbl   :1;     /* D1 controller 2 enable */
++       u32 win2_enbl   :1;     /* D1 window 2 enable */
++       u32 awin2_enbl  :1;     /* D1 alternate window 2 enable */
++       u32 cur2_enbl   :1;     /* D1 cursor 2 enable */
++       u32 reserved_4  :4;
++    }  part;
++    u32 whole;
++};
++
++/* D2 state control */
++union pm02r {
++    struct {
++       u32 osc_enbl    :1;     /* D2 oscillator enable */
++       u32 pll1_enbl   :1;     /* D2 PLL 1 enable */
++       u32 pll2_enbl   :1;     /* D2 PLL 2 enable */
++       u32 pll3_enbl   :1;     /* D2 PLL 3 enable */
++       u32 miu_enbl    :1;     /* D2 Memory Interface Unit (MIU) enable */
++       u32 mem_rfsh    :1;     /* D2 memory refresh enable */
++       u32 ge_enbl     :1;     /* D2 Graphics Engine (GE) enable */
++       u32 reserved_1  :1;
++
++       u32 crt_enbl    :1;     /* D2 CRT enable */
++       u32 fpd_enbl    :1;     /* D2 Flat Panel enable */
++       u32 reserved_2  :6;
++
++       u32 ctl1_enbl   :1;     /* D2 controller 1 enable */
++       u32 win1_enbl   :1;     /* D2 window 1 enable */
++       u32 awin1_enbl  :1;     /* D2 alternate window 1 enable */
++       u32 cur1_enbl   :1;     /* D2 cursor 1 enable */
++       u32 reserved_3  :4;
++
++       u32 ctl2_enbl   :1;     /* D2 controller 2 enable */
++       u32 win2_enbl   :1;     /* D2 window 2 enable */
++       u32 awin2_enbl  :1;     /* D2 alternate window 2 enable */
++       u32 cur2_enbl   :1;     /* D2 cursor 2 enable */
++       u32 reserved_4  :4;
++    }  part;
++    u32 whole;
++};
++
++/* PLL 2 programming */
++union pm06r {
++    struct {
++       u32 clk_src     :1;     /* PLL 2 reference clock source */
++       u32 bypass      :1;     /* PLL 2 bypass */
++       u32 reserved_1  :2;
++       u32 p_par       :3;     /* PLL 2 P parameter */
++       u32 reserved_2  :1;
++
++       u32 n_par       :5;     /* PLL 2 N parameter */
++       u32 reserved_3  :3;
++
++       u32 m_par       :8;     /* PLL 2 M parameter */
++
++       u32 reserved_4  :4;
++       u32 trim        :4;     /* PLL 2 trim value */
++    }  part;
++    u32 whole;
++};
++
++/* PLL 3 programming */
++union pm07r {
++    struct {
++       u32 clk_src     :1;     /* PLL 3 reference clock source */
++       u32 bypass      :1;     /* PLL 3 bypass */
++       u32 reserved_1  :2;
++       u32 p_par       :3;     /* PLL 3 P parameter */
++       u32 reserved_2  :1;
++
++       u32 n_par       :5;     /* PLL 3 N parameter */
++       u32 reserved_3  :3;
++
++       u32 m_par       :8;     /* PLL 3 M parameter */
++
++       u32 reserved_4  :4;
++       u32 trim        :4;     /* PLL 3 trim value */
++    }  part;
++    u32 whole;
++};
++
++
++
++/* MIU interface control 1 */
++union mm00r {
++    struct {
++       u32 miu_enbl    :1;     /* MIU enable bit */
++       u32 mr_dsbl     :1;     /* MIU reset disable bit */
++       u32 edr_dsbl    :1;     /* embedded DRAM reset disable bit */
++       u32 reserved_1  :29;
++    }  part;
++    u32 whole;
++};
++
++/* MIU interface control 2 */
++union mm01r {
++    struct {
++       u32 mc_src      :1;     /* memory clock source */
++       u32 msr_enbl    :1;     /* memory slow refresh enable bit */
++       u32 pb_cpu      :1;     /* page break enable for CPU */
++       u32 pb_gc1      :1;     /* page break enable for GC1 */
++       u32 pb_gc2      :1;     /* page break enable for GC2 */
++       u32 pb_stn_r    :1;     /* page break enable for STN read */
++       u32 pb_stn_w    :1;     /* page break enable for STN write */
++       u32 pb_ge       :1;     /* page break enable for GE */
++       u32 reserved_1  :4;
++       u32 mr_interval :14;    /* normal memory refresh time interval */
++       u32 reserved_2  :4;
++       u32 edarm_enbl  :1;     /* embedded DRAM auto-refresh mode enable */
++       u32 eds_enbl    :1;     /* EDRAM standby enable for EDRAM normal
++                                  mode operation */
++    }  part;
++    u32 whole;
++};
++
++/* memory interface control 3 */
++union mm02r {
++    struct {
++       u32 bs_         :2;
++       u32 bs_stnr     :2;     /* burst count for STN read memory cycles */
++       u32 bs_stnw     :2;     /* burst count for STN write memroy cycles */
++       u32 bs_ge       :2;     /* burst count for graphics engine
++                                  read/write memroy cycles */
++       u32 bs_cpuw     :2;     /* burst count for CPU write memory cycles */
++       u32 fifo_gc1    :4;     /* GC1 display refresh FIFO threshold */
++       u32 fifo_gc2    :4;     /* GC2 display refresh FIFO threshold */
++       u32 fifo_stnr   :4;     /* STN read FIFO threshold */
++       u32 fifo_stnw   :4;     /* STN write FIFO threshold */
++       u32 fifo_ge_src :3;     /* GE source read FIFO threshold */
++       u32 fifo_ge_dst :3;     /* GE destination read FIFO threshold */
++    }  part;
++    u32 whole;
++};
++
++/* memory interface control 4 */
++union mm03r {
++    struct {
++       u32 rd_late_req :1;     /* read latency request */
++       u32 reserved_1  :31;
++    }  part;
++    u32 whole;
++};
++
++/* memory interface control 5 */
++union mm04r {
++    struct {
++       u32 latency     :3;     /* EDRAM latency */
++       u32 dmm_cyc     :1;     /* enable for the dummy cycle insertion
++                                  between read and write cycles */
++       u32 pre_dmm_cyc :1;     /* enable for the dummy cycle insertion
++                                  between read/write and precharge cycles
++                                  for the same bank */
++       u32 reserved_1  :3;
++       u32 bnk_act_cls :2;     /* bank activate command to bank close
++                                  command timing interval control */
++       u32 bnk_act_rw  :1;     /* bank activate command to read/wirte
++                                  command timing interval control */
++       u32 bnk_cls_act :1;     /* bank close command to bank activate
++                                  command timing interval control */
++       u32 trc         :1;     /* row cycle time */
++       u32 reserved_2  :3;
++       u32 delay_r     :2;     /* programmable delay for read clock */
++       u32 delay_m     :2;     /* programmable delay for internal memory
++                                  clock */
++    }  part;
++    u32 whole;
++};
++
++/* graphics controller 1 register */
++union gc00r {
++    struct {
++       u32 ctl_enbl    :1;     /* Controller 1 Enable */
++       u32 hc_reset    :1;     /* Horizontal Counter 1 Reset */
++       u32 vc_reset    :1;     /* Vertical Counter 1 Reset */
++       u32 iwin_enbl   :1;     /* Image Window 1 Enable */
++       u32 gcd         :4;     /* Graphics Color Depth (GCD) */
++
++       u32 hc_enbl     :1;     /* Hardware Cursor 1 Enable */
++       u32 reserved_1  :2;
++       u32 aiwin_enbl  :1;     /* Alternate Image Window Enable */
++       u32 agcd        :4;     /* Alternate Graphics Color Depth (AGCD) */
++
++       u32 g1rclk_src  :2;     /* G1RCLK Source */
++       u32 tm0         :1;     /* Test Mode 0 */
++       u32 tm1         :1;     /* Test Mode 1 */
++       u32 fd          :3;     /* G1MCLK First Clock Divisor (FD1) */
++       u32 reserved_2  :1;
++
++       u32 sd          :8;     /* G1MCLK Second Clock Divisor (SD1) */
++    }  part;
++    u32 whole;
++};
++
++/* graphics controller CRT control */
++union gc01r {
++    struct {
++       u32 dac_enbl    :2;     /* CRT DAC enable */
++       u32 hsync_out   :1;     /* CRT HSYNC output during power down mode */
++       u32 vsync_out   :1;     /* CRT VSYNC output during power down mode */
++       u32 hsync_ctl   :2;     /* CRT HSYNC control */
++       u32 vsync_ctl   :2;     /* CRT VSYNC control */
++       /**/
++       u32 hsync_pol   :1;     /* CRT HSYNC polarity */
++       u32 vsync_pol   :1;     /* CRT VSYNC polarity */
++       u32 sync_p_enbl :1;     /* sync pedestal enable */
++       u32 blnk_p_enbl :1;     /* blank pedestal enable */
++       u32 c_sync_enbl :1;     /* composite sync enable */
++       u32 vref_sel    :1;     /* VREF select */
++       u32 mn_sns_enbl :1;     /* monitor sense enable */
++       u32 ct_out_enbl :1;     /* constant output enable */
++       /**/
++       u32 dac_out_lvl :8;     /* monitor sense DAC output level */
++       /**/
++       u32 blue_dac_r  :1;     /* blue DAC sense result */
++       u32 green_dac_r :1;     /* green DAC sense result */
++       u32 red_dac_r   :1;     /* red DAC sense result */
++       u32 reserved_1  :1;
++       u32 mon_col_sel :1;     /* mono/color monitor select */
++       u32 reserved_2  :3;
++    }  part;
++    u32 whole;
++};
++
++/* horizontal display 1 control */
++union gc02r {
++    struct {
++       u32 hd1t        :12;    /* horizontal display 1 total */
++       u32 reserved_1  :4;
++
++       u32 hd1e        :12;    /* horizontal display 1 end */
++       u32 reserved_2  :4;
++    }  part;
++    u32 whole;
++};
++
++/* vertical display 1 control */
++union gc03r {
++    struct {
++       u32 vd1t        :12;    /* vertical display 1 total */
++       u32 reserved_1  :4;
++
++       u32 vd1e        :12;    /* vertical display 1 end */
++       u32 reserved_2  :4;
++    }  part;
++    u32 whole;
++};
++
++/* horizontal sync 1 control */
++union gc04r {
++    struct {
++       u32 hs1s        :12;    /* horizontal sync 1 start */
++       u32 reserved_1  :4;
++
++       u32 hs1e        :12;    /* horizontal sync 1 end */
++       u32 reserved_2  :4;
++    }  part;
++    u32 whole;
++};
++
++/* vertical sync 1 control */
++union gc05r {
++    struct {
++       u32 vs1s        :12;    /* vertical sync 1 start */
++       u32 reserved_1  :4;
++
++       u32 vs1e        :12;    /* vertical sync 1 end */
++       u32 reserved_2  :4;
++    }  part;
++    u32 whole;
++};
++
++/* vertical display 1 count */
++union gc07r {
++    struct {
++       u32 vd_cnt      :12;    /* vertical display 1 count */
++       u32 reverved_1  :20;
++    }  part;
++    u32 whole;
++};
++
++/* horizontal window 1 control */
++union gc08r {
++    struct {
++       u32 hw1s        :12;    /* horizontal window 1 start (HW1S) */
++       u32 reserved_1  :4;
++
++       u32 hw1w        :12;    /* horizontal window 1 width (HW1W) */
++       u32 w1ald       :4;     /* window 1 additional line data */
++    }  part;
++    u32 whole;
++};
++
++/* vertical window 1 control */
++union gc09r {
++    struct {
++       u32 vw1s        :12;    /* vertical window 1 start */
++       u32 reserved_1  :4;
++       u32 vw1h        :12;    /* vertical window 1 height */
++       u32 reserved_2  :4;
++    }  part;
++    u32 whole;
++};
++
++/* window 1 start address */
++union gc0cr {
++    struct {
++       u32 w1sa        :21;    /* window 1 start address */
++       u32 reserved_1  :11;
++    }  part;
++    u32 whole;
++};
++
++/* window 1 stride */
++union gc0er {
++    struct {
++       s16 w1st;               /* window 1 stride */
++       s16 aw1st;              /* alternate window 1 stride */
++    }  part;
++    u32 whole;
++};
++
++/* hardware cursor 1 position */
++union gc10r {
++    struct {
++       u32 hc1s        :12;    /* horizontal cursor 1 start */
++       u32 reserved_1  :4;
++       u32 vc1s        :12;    /* vertical cursor 1 start */
++       u32 reserved_2  :4;
++    }  part;
++    u32 whole;
++};
++
++/* hardware cursor 1 start address and offset */
++union gc11r {
++    struct {
++       u32 hc1sa       :11;    /* hardware cursor 1 start address */
++       u32 reserved_1  :5;
++       u32 hc1o        :6;     /* horizontal cursor 1 offset */
++       u32 reserved_2  :2;
++       u32 vc1o        :6;     /* vertical cursor 1 offset */
++       u32 reserved_3  :2;
++    }  part;
++    u32 whole;
++};
++
++/* hardware cursor 1 foreground color */
++union gc12r {
++    struct {
++       u32 hc1fc       :24;    /* hardware cursor 1 foreground color */
++       u32 reserved_1  :8;
++    }  part;
++    u32 whole;
++};
++
++/* hardware cursor 1 background color */
++union gc13r {
++    struct {
++       u32 hc1bc       :24;    /* hardware cursor 1 background color */
++       u32 reserved_1  :8;
++    }  part;
++    u32 whole;
++};
++
++/* primary drawing command register */
++union ge00r {
++    struct {
++       u32 rop         :8;     /* raster operation */
++       /**/
++       u32 cmd_typ     :3;     /* command type */
++       u32 x_dir       :1;     /* x direction */
++       u32 y_dir       :1;     /* y direction */
++       u32 src_mem     :1;     /* source memory */
++       u32 mon_src     :1;     /* mono source */
++       u32 mon_ptn     :1;     /* mono pattern */
++       /**/
++       u32 dst_trns_e  :1;     /* destination transparency enable */
++       u32 dst_trns_p  :1;     /* destination transparency polarity */
++       u32 mon_trns_e  :1;     /* mono source or mono pattern transparency
++                                  enable */
++       u32 mon_trns_p  :1;     /* mono transparency polarity */
++       u32 mod_sel     :1;     /* memory to screen or off screen to screen
++                                  mode select */
++       u32 alpha_sel   :2;     /* Alpha byte mask selection */
++       u32 sol_col     :1;     /* solid color */
++       /**/
++       u32 stride_eq   :1;     /* source stride is equal to destination
++                                  stride */
++       u32 rop2_sel    :1;     /* ROP2 code selection */
++       u32 clipping    :1;     /* enable clipping */
++       u32 auto_exec   :1;     /* auto execute */
++       u32 reserved_1  :4;
++    }  part;
++    u32 whole;
++};
++
++/* primary width and height register */
++union ge01r {
++    struct {
++       u32 width       :12;    /* source/destination window width */
++       u32 reserved_1  :4;
++
++       u32 height      :12;    /* source/destination window height */
++       u32 reserved_2  :1;
++       u32 reserved_3  :3;
++    }  bitblt;
++    struct {
++       u32 dm          :17;
++       u32 axis_major  :12;
++       u32 x_y         :1;     /* x-major or y-major */
++       u32 last_pix    :1;     /* decision to draw or not to draw the last
++                                  pixel of the line */
++       u32 reserved_1  :1;
++    }  bresenham;
++    u32 whole;
++};
++
++/* primary destination address register */
++union ge02r {
++    struct {
++       u32 dst_x       :12;    /* destination x position */
++       u32 reserved_1  :1;
++       u32 h_offset    :3;     /* mono/color pattern horizontal offset */
++
++       u32 dst_y       :12;    /* destination y position */
++       u32 reserved_2  :1;
++       u32 v_offset    :3;     /* mono/color pattern vertical offset */
++    }  window;
++    struct {
++       u32 x           :12;    /* starting x coordinate */
++       u32 dm          :17;    /* 17 bits major-axis delta */
++       u32 reserved_1  :3;
++    }  line;
++    u32 whole;
++};
++
++/* source XY register/line draw starting Y coordinate and mintor axis delta */
++union ge03r {
++    struct {
++       u32 src_x       :12;    /* source X position */
++       u32 reserved_1  :4;
++
++       u32 src_y       :12;    /* source Y position */
++       u32 reserved_2  :4;
++    }  window;
++    struct {
++       u32 start_y     :12;    /* starting Y coordinate */
++       u32 dn          :17;    /* 17 bits minor-axis delta */
++       u32 reserved_1  :3;
++    }  line;
++    u32 whole;
++};
++
++/* clip left/top register */
++union ge05r {
++    struct {
++       u32 left        :12;    /* left edge of clipping rectangle */
++       u32 reserved_1  :4;
++
++       u32 top         :12;    /* top edge of clipping rectangle */
++       u32 reserved_2  :4;
++    }  part;
++    u32 whole;
++};
++
++/* source stride/offset register */
++union ge09r {
++    struct {
++       u32 src_strid   :12;    /* source line stride */
++       u32 reserved_1  :13;
++       u32 strt_bit    :3;     /* initial mono source bit offset */
++       u32 strt_byte   :3;     /* initial mono/color source byte offset */
++       u32 reserved_2  :1;
++    }  line;
++    struct {
++       u32 strt_bit    :5;     /* initial mono source bit offset */
++       u32 reserved_1  :1;
++       u32 amount      :10;    /* number of 16 bytes amount that MIU need
++                                  to fetch from frame buffer */
++
++       u32 reserved_2  :9;
++       u32 bit_spc     :7;     /* bit space between lines */
++    }  pack_mono;
++    struct {
++       u32 strt_bit    :3;     /* initial mono source bit offset */
++       u32 strt_byte   :3;     /* initial mono/color source byte offset */
++       u32 amount      :10;    /* number of 16 bytes amount that MIU need
++                                  to fetch from frame buffer */
++
++       u32 reserved_1  :9;
++       u32 bit_spc     :3;     /* bit space between lines */
++       u32 byt_spc     :4;     /* byte space between lines */
++    }  pack_color;
++    u32 whole;
++};
++
++/* destination stride register and color depth */
++union ge0ar {
++    struct {
++       u32 dst_strid   :12;    /* destination line stride and color depth */
++       u32 reserved_1  :18;
++       u32 col_dpth    :2;     /* color depth */
++    }  part;
++    u32 whole;
++};
++
++/* graphics controller color pallete */
++union c1xxr {
++    struct {
++       u8 red;                 /* red color pallete */
++       u8 green;               /* green/gray color pallete */
++       u8 blue;                /* blue color palette */
++       u8 reserved_1;
++    }  part;
++    u32 whole;
++};
++
++/* devicee configuration register 0 */
++union dc00r {
++    struct {
++       u32 osc_bypass  :1;     /* oscillator bypass */
++       u32 osc_enbl    :1;     /* oscillator enable */
++       u32 pll1_bypass :1;     /* PLL1 bypass */
++       u32 pll1_enbl   :1;     /* PLL1 enable */
++       u32 pll1_p_par  :3;     /* PLL1 P parameter */
++       u32 cpu_div     :1;     /* CPU interface clock divisor */
++       u32 pll1_n_par  :5;     /* PLL1 N parameter */
++       u32 saisc       :1;     /* StrongARM interface synchronizer control */
++       u32 s_chp_reset :1;     /* software chip reset */
++       u32 mem_enbl    :1;     /* memory standby enable */
++       u32 pll1_m_par  :8;     /* PLL 1 M parameter */
++       u32 osc_shaper  :1;     /* oscillator shaper disable */
++       u32 fast_pwr    :1;     /* fast power sequencing */
++       u32 osc_frq     :2;     /* oscillator frequency select */
++       u32 pll1_trim   :4;     /* PLL 1 trim value */
++    }  part;
++    u32 whole;
++};
++
++/* device ID/vendor ID register */
++union pc00r {
++    struct {
++       u16 device;       /* device ID */
++       u16 vendor;       /* vendor ID */
++    }  part;
++    u32 whole;
++};
++
++/* Flat Panel Control Register */
++union fp00r {
++    struct {
++	u32  flatp_enbl : 2;   /* Flat Panel Interface Enable */
++	u32  flatp_type : 2;   /* Flat Panel Type */
++	u32  mono       : 1;   /* Mono/Color Panel Select */
++	u32  flatp_intf : 3;   /* Flat Panel Interface */
++	u32  dither_pat : 2;   /* Dither Pattern */
++	u32  reserved   : 2;   /* Reserved Must Be 0*/
++	u32  dither_col : 3;   /* Dither Base Color */
++	u32  alt_win_ctl: 1;   /* Alternate Window Control */
++	u32  frc_ctl    : 2;   /* FRC Control */
++	u32  dither_adj1: 6;   /* Dither Pattern Adjust 1 */
++	u32  dither_adj2: 3;   /* Dither Pattern Adjust 2 */
++	u32  dither_adj3: 1;   /* Dither Pattern Adjust 3 */
++	u32  test_mode0 : 1;   /* Test Mode 0 */
++	u32  test_mode1 : 1;   /* Test Mode 1 */
++	u32  test_mode2 : 1;   /* Test Mode 2 */
++	u32  test_mode3 : 1;   /* Test Mode 3 */
++    } part;
++    u32 whole;
++};
++
++union fp01r {
++    struct {
++	u32 dummy;
++    } part;
++    u32 whole;
++};
++
++union fp02r {
++    struct {
++	u32 dummy;
++    } part;
++    u32 whole;
++};
++
++union fp03r {
++    struct {
++	u32 dummy;
++    } part;
++    u32 whole;
++};
++
++union fp04r {
++    struct {
++	u32 dummy;
++    } part;
++    u32 whole;
++};
++
++union fp05r {
++    struct {
++	u32 dummy;
++    } part;
++    u32 whole;
++};
++
++union fp0fr {
++    struct {
++	u32 dummy;
++    } part;
++    u32 whole;
++};
++
++
++
++
++/****
++ * Others
++ */
++
++#define CHIPNAME "MQ-200"
++
++extern void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr);
++extern void mq200_external_setqmode(struct mq200_monitor_info*, unsigned long, spinlock_t *);
++extern void mq200_external_offdisplay(unsigned long);
++extern void mq200_external_ondisplay (unsigned long);
++extern int  mq200_external_probe(unsigned long);
++
++
++
++#endif
+diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq_external.c linux-2.6.20/drivers/video/mq200/mq_external.c
+--- linux-2.6.20.vanilla/drivers/video/mq200/mq_external.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20/drivers/video/mq200/mq_external.c	2007-02-11 16:41:09.000000000 +0100
+@@ -0,0 +1,427 @@
++/*
++ * Copyright (C) 2005 Holger Hans Peter Freyther
++ *
++ * Based ON:
++ *
++ * linux/drivers/video/mq200fb.c -- MQ-200 for a frame buffer device
++ * based on linux/driver/video/pm2fb.c
++ *
++ * Copyright (C) 2000 Lineo, Japan
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ */
++
++#include <asm/types.h>
++#include <asm/io.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++
++#include "mq200_data.h"
++
++
++#if 1
++#define PRINTK(args...) printk(args)
++#else
++#define PRINTK(args...)
++#endif
++
++
++/****
++ * power state transition to "state".
++ */
++static void
++power_state_transition(unsigned long register_base, int state)
++{
++    int i;
++    writel(state, PMCSR(register_base));
++    for (i = 1; ; i++) {
++       udelay(100);
++       if ((readl(PMCSR(register_base)) & 0x3) == state) {
++	   break;
++       }
++    }
++}
++
++
++/****
++ * device configuration initialization.
++ */
++static void
++dc_reset(unsigned long register_base)
++{
++    union dc00r dc00r;
++
++    /* Reset First */
++    dc00r.whole       = DC_RESET;
++    writel(dc00r.whole, DC00R(register_base));
++    udelay(10);
++
++
++    dc00r.whole = 0xEF2082A;
++    writel(dc00r.whole, DC00R(register_base));
++    udelay(5);
++    PRINTK(CHIPNAME ": DC00R = %xx\n", readl(DC00R(register_base)));
++}
++
++
++/****
++ * initialize memory interface unit.
++ */
++static void
++miu_reset(unsigned long register_base)
++{
++    union mm00r mm00r;
++    union mm01r mm01r;
++    union mm02r mm02r;
++    union mm03r mm03r;
++    union mm04r mm04r;
++
++    /* MIU interface control 1 */
++    mm00r.whole = 0x4;
++    writel(mm00r.whole, MM00R(register_base));
++    udelay(5);
++    writel(0, MM00R(register_base));
++    udelay(50);
++
++    /* MIU interface control 2
++     * o PLL 1 output is used as memory clock source.
++     */
++    mm01r.whole = 0x4143e086;
++    writel(mm01r.whole, MM01R(register_base));
++
++    /* memory interface control 3 */
++    mm02r.whole = 0x6d6aabff;
++    writel(mm02r.whole, MM02R(register_base));
++
++    /* memory interface control 5 */
++    mm04r.whole = 0x10d;
++    writel(mm04r.whole, MM04R(register_base));
++
++    /* memory interface control 4 */
++    mm03r.whole = 0x1;
++    writel(mm03r.whole, MM03R(register_base));
++    mdelay(10);
++
++    /* MIU interface control 1 */
++    mm00r.whole = 0x3;
++    writel(mm00r.whole, MM00R(register_base));
++    mdelay(50);
++}
++
++/****
++ *
++ */
++static
++void fpctrl_reset(unsigned long addr)
++{
++   /*
++     * We're in D0 State, let us set the FPCTRL
++     */
++    union fp00r fp00r;
++    union fp01r fp01r;
++    union fp02r fp02r;
++    union fp03r fp03r;
++    union fp04r fp04r;
++    union fp0fr fp0fr;
++
++    fp00r.whole = 0x6320;
++    writel(fp00r.whole, FP00R(addr));
++
++    fp01r.whole = 0x20;
++    writel(fp01r.whole, FP01R(addr));
++
++    fp04r.whole = 0xBD0001;
++    writel(fp04r.whole, FP04R(addr));
++
++    /* Set Flat Panel General Purpose register first */
++    fp02r.whole = 0x0;
++    writel(fp02r.whole, FP02R(addr));
++
++    fp03r.whole = 0x0;
++    writel(fp03r.whole, FP03R(addr));
++
++    fp0fr.whole = 0xA16c44;
++    writel(fp0fr.whole, FP0FR(addr));
++
++
++    /* Set them again */
++    fp02r.whole = 0x0;
++    writel(fp02r.whole, FP02R(addr));
++
++    fp03r.whole = 0x0;
++    writel(fp03r.whole, FP03R(addr));
++}
++
++
++/****
++ * initialize power management unit.
++ */
++static void
++pmu_reset(unsigned long register_base)
++{
++    union pm00r pm00r;
++    union pm01r pm01r;
++    union pm02r pm02r;
++//    union pm06r pm06r;
++//    union pm07r pm07r;
++
++    /* power management miscellaneous control
++     * o GE is driven by PLL 1 clock.
++     */
++    pm00r.whole = 0xc0900;
++    writel(pm00r.whole, PM00R(register_base));
++
++    /* D1 state control */
++    pm01r.whole = 0x5000271;
++    writel(pm01r.whole, PM01R(register_base));
++
++    /* D2 state control */
++    pm02r.whole = 0x271;
++    writel(pm02r.whole, PM02R(register_base));
++
++#if 0
++    /* PLL 2 programming */
++    pm06r.whole = 0xE90830;
++    writel(pm06r.whole, PM06R(register_base));
++
++    /* PLL 3 programming */
++    pm07r.whole = 0xE90830;
++    writel(pm07r.whole, PM07R(register_base));
++#endif
++}
++
++/****
++ * initialize graphics controller 1.
++ */
++static void
++gc1_reset(unsigned long register_base, spinlock_t *lock )
++{
++    unsigned long flags;
++    union gc00r gc00r;
++    union gc01r gc01r;
++    union gc02r gc02r;
++    union gc03r gc03r;
++    union gc04r gc04r;
++    union gc05r gc05r;
++    union gc08r gc08r;
++    union gc09r gc09r;
++//    union gc0er gc0er;
++//    union gc11r gc11r;
++    union pm00r pm00r;
++    union pm06r pm06r;
++
++    spin_lock_irqsave(lock, flags);
++
++    /* graphics controller CRT control */
++    gc01r.whole = 0x800;
++    writel(gc01r.whole, GC01R(register_base));
++
++    /* horizontal display 1 control */
++    gc02r.whole = 0x320041e;
++    writel(gc02r.whole, GC02R(register_base));
++
++    /* vertical display 1 control */
++    gc03r.whole = 0x2570273;
++    writel(gc03r.whole, GC03R(register_base));
++
++    /* horizontal sync 1 control */
++    gc04r.whole = 0x3c70347;
++    writel(gc04r.whole, GC04R(register_base));
++
++    /* vertical sync 1 control */
++    gc05r.whole = 0x25d0259;
++    writel(gc05r.whole, GC05R(register_base));
++
++    /* horizontal window 1 control */
++    gc08r.whole = 0x131f0000;
++    writel(gc08r.whole, GC08R(register_base));
++
++    /* vertical window 1 control */
++    gc09r.whole = 0x2570000;
++    writel(gc09r.whole, GC09R(register_base));
++
++#if 0
++    /* alternate horizontal window 1 control */
++    writel(0, GC0AR(register_base));
++
++    /* alternate vertical window 1 control */
++    writel(0, GC0BR(register_base));
++
++    /* window 1 start address */
++    writel(0x2004100, GC0CR(register_base));
++
++    /* alternate window 1 start address */
++    writel(0, GC0DR(register_base));
++
++    /* window 1 stride */
++    gc0er.whole = 0x5100048;
++    writel(gc0er.whole, GC0ER(register_base));
++
++    /* reserved register - ??? - */
++    writel(0x31f, GC0FR(register_base));
++#endif
++
++#if 0
++    /* hardware cursor 1 position */
++    writel(0, GC10R(register_base));
++
++    /* hardware cursor 1 start address and offset */
++    gc11r.whole = 0x5100048;
++    writel(gc11r.whole, GC11R(register_base));
++
++    /* hardware cursor 1 foreground color */
++    writel(0x00ffffff, GC12R(register_base));
++
++    /* hardware cursor 1 background color */
++    writel(0x00000000, GC13R(register_base));
++#endif
++
++    /* PLL 2 programming */
++    pm06r.whole = 0xE90830;
++    writel(pm06r.whole, PM06R(register_base));
++
++
++    /* graphics controller 1 register
++     * o GC1 clock source is PLL 2.
++     * o hardware cursor is disabled.
++     */
++    gc00r.whole = 0x10200C8;
++    writel(gc00r.whole, GC00R(register_base));
++
++    /*
++     * Enable PLL2 in the PM Register
++     */
++    pm00r.whole = readl(PM00R(register_base));
++    pm00r.part.pll2_enbl = 0x1;
++    writel(pm00r.whole, PM00R(register_base));
++
++    spin_unlock_irqrestore(lock, flags);
++}
++
++
++/****
++ * initialize graphics engine.
++ */
++static void
++ge_reset(unsigned long register_base)
++{
++    /* drawing command register */
++    writel(0, GE00R(register_base));
++
++    /* promary width and height register */
++    writel(0, GE01R(register_base));
++
++    /* primary destination address register */
++    writel(0, GE02R(register_base));
++
++    /* primary source XY register */
++    writel(0, GE03R(register_base));
++
++    /* primary color compare register */
++    writel(0, GE04R(register_base));
++
++    /* primary clip left/top register */
++    writel(0, GE05R(register_base));
++
++    /* primary clip right/bottom register */
++    writel(0, GE06R(register_base));
++
++    /* primary source and pattern offset register */
++    writel(0, GE07R(register_base));
++
++    /* primary foreground color register/rectangle fill color depth */
++    writel(0, GE08R(register_base));
++
++    /* source stride/offset register */
++    writel(0, GE09R(register_base));
++
++    /* destination stride register and color depth */
++    writel(0, GE0AR(register_base));
++
++    /* image base address register */
++    writel(0, GE0BR(register_base));
++}
++
++
++/****
++ * initialize Color Palette 1.
++ */
++static void
++cp1_reset(unsigned long addr_info)
++{
++    int i;
++
++    for (i = 0; i < 256; i++)
++       writel(0, C1xxR(addr_info, i));
++}
++
++
++
++
++/*
++ * Below functions are called from the skeleton
++ */
++void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr)
++{
++    writel(color,C1xxR(addr,regno));
++}
++
++void mq200_external_setqmode(struct mq200_monitor_info* info,
++			     unsigned long addr, spinlock_t *lock)
++{
++    dc_reset(addr);     /* device configuration */
++
++    power_state_transition(addr, 0);       /* transition to D0 state */
++    pmu_reset(addr);    /* power management unit */
++    miu_reset(addr);    /* memory interface unit */
++    ge_reset(addr);     /* graphics engine */
++    fpctrl_reset(addr); /* reset the panel settings */
++    gc1_reset(addr, lock); /* graphics controller 1 */
++    cp1_reset(addr);    /* color palette 1 */
++    mq200_external_ondisplay(addr);
++}
++
++void mq200_external_offdisplay(unsigned long addr)
++{
++    /*
++     * Move the MQ200 to D3 mode
++     */
++    power_state_transition(addr, 3);
++}
++
++/**
++ * to be called after mq200_external_setqmode
++ */
++void mq200_external_ondisplay (unsigned long addr)
++{
++    /*
++     * Set the framebuffer details
++     */
++    #warning FIX HERE AS WELL
++    union gc00r gc00r;
++    union fp00r fp00r;
++    gc00r.whole = readl(GC00R(addr));
++    fp00r.whole = readl(FP00R(addr));
++
++    if(!(gc00r.whole & 0x1)) {
++	gc00r.whole |= 1;
++	writel(gc00r.whole, GC00R(addr));
++    }
++
++    fp00r.whole |= 0x01;
++    writel(fp00r.whole, FP00R(addr));
++}
++
++int mq200_external_probe(unsigned long addr)
++{
++    union pc00r pc00r;
++    if(readl(PMR(addr)) != PMR_VALUE)
++       return 0;
++
++    pc00r.whole = readl(PC00R(addr));
++    printk(KERN_INFO "mq200 video driver found Vendor:%d Device:%d\n",
++	   pc00r.part.device, pc00r.part.vendor);
++    return 1;
++}
+diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq_skeleton.c linux-2.6.20/drivers/video/mq200/mq_skeleton.c
+--- linux-2.6.20.vanilla/drivers/video/mq200/mq_skeleton.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20/drivers/video/mq200/mq_skeleton.c	2007-02-11 16:41:09.000000000 +0100
+@@ -0,0 +1,401 @@
++/*
++ * Author: Holger Hans Peter Freyther
++ *
++ *
++ * This implements the frame buffer driver interface to communicate
++ * with the kernel.
++ * It uses the mq200 routines from the ucLinux driver from Lineo
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/autoconf.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/fb.h>
++#include <linux/types.h>
++#include <linux/spinlock.h>
++
++#include "mq200_data.h"
++
++#if CONFIG_SA1100_SIMPAD
++/*
++ * Siemens SIMpad specefic data
++ */
++#include <asm/arch/simpad.h>
++#include <asm/arch/hardware.h>
++
++#define MQ200_REGIONS simpad_mq200_regions
++#define MQ200_MONITOR simpad_mq200_panel
++
++static struct mq200_io_regions simpad_mq200_regions = {
++	.fb_size        = MQ200_FB_SIZE,
++	.phys_mmio_base = 0x4be00000,
++	.virt_mmio_base = 0xf2e00000,
++	.phys_fb_base   = 0x4b800000,
++	.virt_fb_base   = 0xf2800000,
++};
++
++static struct mq200_monitor_info simpad_mq200_panel = {
++	.horizontal_res = 800,
++	.vertical_res   = 600,
++	.depth          = 16,
++	.refresh        = 60,
++	.line_length    = 1600,
++	.flags          = 0x00130004,
++};
++
++extern long get_cs3_shadow(void);
++extern void set_cs3_bit(int value);
++extern void clear_cs3_bit(int value);
++#endif
++
++
++
++struct mq200_info {
++	struct fb_info fb_info;
++	struct mq200_io_regions io_regions;
++	struct mq200_monitor_info monitor_info;
++
++        /* palette */
++	u32	pseudo_palette[17]; /* 16 colors + 1 in reserve not that well documented... */
++	spinlock_t lock;
++};
++
++
++
++static int mq200_blank( int blank_mode, struct fb_info *info )
++{
++#ifdef CONFIG_SA1100_SIMPAD
++	if(blank_mode ){
++		clear_cs3_bit(DISPLAY_ON);
++	}else {
++		set_cs3_bit(DISPLAY_ON);
++	}
++#endif
++	return 0;
++}
++
++
++static int mq200_check_var(struct fb_var_screeninfo *var,
++			   struct fb_info *info )
++{	/* TODO do we need sanity checks here */
++	return 0;
++}
++
++
++static int mq200_set_par( struct fb_info *info )
++{
++	/* TODO set paraemeter */
++	return 0;
++}
++
++static int mq200_setcolreg(unsigned regno, unsigned red, unsigned green,
++			   unsigned blue, unsigned transp,
++			   struct fb_info *info )
++{
++	struct mq200_info *p;
++	unsigned long color;
++	u32* pal = info->pseudo_palette;
++
++	p = info->par;
++
++	if(regno > 255 )
++		return 1;
++
++	switch( info->var.bits_per_pixel ){
++	case 16:
++		pal[regno] =
++			((red & 0xf800) >> 0) |
++			((green & 0xf800) >> 5) | ((blue & 0xf800) >> 11);
++		break;
++	case 24:
++		pal[regno] =
++			((red & 0xff00) << 8) |
++			((green & 0xff00)) | ((blue & 0xff00) >> 8);
++		break;
++	case 32:
++		pal[regno] =
++			((red & 0xff00) >> 8) |
++			((green & 0xff00)) | ((blue & 0xff00) << 8);
++		break;
++	default:
++		break;
++	}
++
++	red &= 0xFF;
++	green &= 0xFF;
++	blue &= 0xFF;
++
++	color = red | (green << 8) | (blue << 16);
++	mq200_external_setpal(regno, color, p->io_regions.virt_mmio_base);
++
++	return 0;
++}
++
++
++
++
++static struct fb_ops mq200_ops = {
++	.owner		= THIS_MODULE,
++	.fb_check_var	= mq200_check_var,
++	.fb_set_par	= mq200_set_par,
++	.fb_setcolreg	= mq200_setcolreg,
++#ifdef FB_SOFT_CURSOR
++	.fb_cursor	= soft_cursor, /*  FIXME use hardware cursor */
++#endif
++	.fb_fillrect	= cfb_fillrect,
++	.fb_copyarea	= cfb_copyarea,
++	.fb_imageblit	= cfb_imageblit,
++	.fb_blank	= mq200_blank,
++};
++
++
++/*********************************************************************
++ *
++ * Device driver and module init code
++ * this will register to the fb layer later
++ *
++ *********************************************************************/
++static void mq200_internal_init_color( struct fb_bitfield* red,
++				       struct fb_bitfield* green,
++				       struct fb_bitfield* blue,
++				       int bpp )
++{
++	switch ( bpp )
++	{
++	case 16:
++		red->offset	= 11;
++		green->offset	= 5;
++		blue->offset	= 0;
++
++		red->length	= 5;
++		green->length	= 6;
++		blue->length	= 5;
++		break;
++	case 24:
++		red->offset	= 16;
++		green->offset	= 8;
++		blue->offset	= 0;
++
++		red->length	= 8;
++		green->length	= 8;
++		blue->length	= 8;
++		break;
++	case 32:
++		red->offset	= 0;
++		green->offset	= 8;
++		blue->offset	= 16;
++
++		red->length	= 8;
++		green->length	= 8;
++		blue->length	= 8;
++	case 8: /* fall through */
++	default:
++		red->offset = green->offset = blue->offset = 0;
++		red->length = green->length = blue->length = bpp;
++		break;
++	}
++
++}
++
++
++static struct mq200_info* __init mq200_internal_init_fbinfo(void)
++{
++	struct mq200_info	*info = NULL;
++
++	info = (struct mq200_info*)kmalloc(sizeof(*info), GFP_KERNEL);
++	if(!info)
++		return NULL;
++
++        /*
++	 * Initialize memory
++	 */
++	memset(info, 0, sizeof(struct mq200_info) );
++	spin_lock_init(&info->lock);
++
++        /* set the base IO addresses */
++	info->io_regions   = MQ200_REGIONS;
++	info->monitor_info = MQ200_MONITOR;
++
++	info->fb_info.screen_base = (char *)info->io_regions.virt_fb_base;
++
++	/* fb_fix_screeninfo filling */
++	strcpy(info->fb_info.fix.id, "MQ200_FB" );
++	info->fb_info.fix.smem_start	= info->io_regions.phys_fb_base;
++	info->fb_info.fix.smem_len	= info->io_regions.fb_size; /* - CURSOR_IMAGE */
++	info->fb_info.fix.mmio_start	= info->io_regions.phys_mmio_base;
++	info->fb_info.fix.mmio_len	= MQ200_REGS_SIZE;
++	info->fb_info.fix.type		= FB_TYPE_PACKED_PIXELS;
++	info->fb_info.fix.accel		= FB_ACCEL_NONE;
++	info->fb_info.fix.line_length	= MQ200_MONITOR_LINE_LENGTH(info);
++
++	if(MQ200_MONITOR_DEPTH(info) <= 8 )
++		info->fb_info.fix.visual = FB_VISUAL_PSEUDOCOLOR;
++	else if( MQ200_MONITOR_DEPTH(info) >= 16 )
++		info->fb_info.fix.visual = FB_VISUAL_DIRECTCOLOR;
++	else
++		panic("Calling mq200 with wrong display data\n");
++
++	/* set the variable screen info */
++	info->fb_info.var.xres	= MQ200_MONITOR_HORI_RES(info);
++	info->fb_info.var.yres	= MQ200_MONITOR_VERT_RES(info);
++	info->fb_info.var.xres_virtual = MQ200_MONITOR_HORI_RES(info);
++	info->fb_info.var.yres_virtual = MQ200_MONITOR_VERT_RES(info);
++	info->fb_info.var.bits_per_pixel = MQ200_MONITOR_DEPTH(info);
++
++	mq200_internal_init_color(&info->fb_info.var.red,
++				  &info->fb_info.var.green,
++				  &info->fb_info.var.blue,
++				  MQ200_MONITOR_DEPTH(info) );
++
++	info->fb_info.var.transp.length = info->fb_info.var.transp.offset = 0;
++	info->fb_info.var.height = info->fb_info.var.width = -1;
++
++	info->fb_info.var.vmode = FB_VMODE_NONINTERLACED;
++	info->fb_info.var.pixclock = 10000;
++	info->fb_info.var.left_margin = info->fb_info.var.right_margin = 16;
++	info->fb_info.var.upper_margin = info->fb_info.var.lower_margin = 16;
++	info->fb_info.var.hsync_len = info->fb_info.var.vsync_len = 8;
++
++	info->fb_info.var.nonstd	= 0;
++	info->fb_info.var.activate	= FB_ACTIVATE_NOW;
++	info->fb_info.var.accel_flags	= 0;
++
++	return info;
++}
++
++
++extern void mq200_register_attributes(struct device* );
++/*
++ * gets called from the bus
++ * we will register our framebuffer from here
++ */
++static int __init mq200_probe(struct device *dev)
++{
++	struct mq200_info	*info = NULL;
++	int retv= 0;
++
++	info = mq200_internal_init_fbinfo();
++	if(!mq200_external_probe(info->io_regions.virt_mmio_base))
++	    goto error_out;
++
++
++	GAFR &= ~(1<<3);
++	GPSR |=  (1<<3);
++	GPDR |=  (1<<3);
++
++	mq200_external_setqmode(&info->monitor_info,
++				info->io_regions.virt_mmio_base,
++				&info->lock);
++
++	info->fb_info.fbops = &mq200_ops;
++	info->fb_info.flags = FBINFO_FLAG_DEFAULT;
++
++	mq200_check_var(&info->fb_info.var, &info->fb_info );
++
++	fb_alloc_cmap(&info->fb_info.cmap, 1 << MQ200_MONITOR_DEPTH(info), 0 );
++
++	info->fb_info.pseudo_palette = (void*)info->pseudo_palette;
++
++	/* save the pointer to the mq200 struct in var */
++	info->fb_info.par = info;
++
++	retv = register_framebuffer(&info->fb_info );
++	if(retv < 0)
++		goto error_out;
++
++
++	/* will get unset if retv != 0 */
++	dev_set_drvdata(dev, info );
++	return retv;
++
++/*
++ * Free the info and exit
++ */
++error_out:
++	kfree(info);
++	return -EINVAL;
++}
++
++#ifdef CONFIG_PM
++static struct mq200_info* get_mq200_info( struct device *dev)
++{
++	return dev_get_drvdata(dev);
++}
++
++static unsigned long  get_mmio_base( struct device *dev )
++{
++	struct mq200_info *info = get_mq200_info(dev);
++	return info->io_regions.virt_mmio_base;
++}
++
++static struct mq200_monitor_info* get_monitor_info( struct device *dev)
++{
++	struct mq200_info *info = get_mq200_info(dev);
++	return &info->monitor_info;
++}
++
++static spinlock_t* get_spinlock( struct device *dev)
++{
++	return &get_mq200_info(dev)->lock;
++}
++
++/*
++ * FIXME: make sure we only call mq200_external_offdisplay only once
++ * a 2nd time will hang the kernel -zecke
++ *
++ * FIXME: save the content of the framebuffer inside dev->saved_state
++ *        so on resume we can memcpy it back into the buffer and userspace
++ *        does not need to redraw
++ *
++ * functions for suspending and resuming
++ */
++static int mq200_suspend(struct device *dev, pm_message_t state)
++{
++
++    mq200_external_offdisplay( get_mmio_base(dev) );
++    clear_cs3_bit(DISPLAY_ON);
++
++
++    return 0;
++}
++
++static int mq200_resume(struct device *dev)
++{
++    unsigned long mem = get_mmio_base(dev);
++    struct mq200_monitor_info *monitor = get_monitor_info(dev);
++    mq200_external_setqmode(monitor, mem, get_spinlock(dev) );
++
++
++    /*
++     * Set display on if it was on
++     */
++	set_cs3_bit(DISPLAY_ON);
++
++	return 0;
++}
++
++
++#endif
++
++
++static struct device_driver mq200fb_driver = {
++	.name		= "simpad-mq200",
++	.bus		= &platform_bus_type,
++	.probe		= mq200_probe, /* will be called after we've registered the driver */
++	.suspend	= mq200_suspend,
++	.resume		= mq200_resume
++};
++
++int __devinit mq200_init(void)
++{
++	return driver_register(&mq200fb_driver);
++}
++
++module_init(mq200_init);
++MODULE_DESCRIPTION("MQ200 framebuffer driver");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Holger Hans Peter Freyther");
diff --git a/packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch
new file mode 100644
index 0000000000..cbc2272eb2
--- /dev/null
+++ b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.ucb1x00-switches.patch
@@ -0,0 +1,227 @@
+diff -uNr linux-2.6.20.vanilla/drivers/mfd/Kconfig linux-2.6.20/drivers/mfd/Kconfig
+--- linux-2.6.20.vanilla/drivers/mfd/Kconfig	2007-02-09 18:27:41.000000000 +0100
++++ linux-2.6.20/drivers/mfd/Kconfig	2007-02-09 19:29:23.000000000 +0100
+@@ -23,4 +23,7 @@
+ 	tristate "Touchscreen interface support"
+ 	depends on MCP_UCB1200 && INPUT
+ 
++config MCP_UCB1200_SWITCHES
++        tristate "SIMpad Switches support"
++        depends on MCP_UCB1200 && INPUT
+ endmenu
+diff -uNr linux-2.6.20.vanilla/drivers/mfd/Makefile linux-2.6.20/drivers/mfd/Makefile
+--- linux-2.6.20.vanilla/drivers/mfd/Makefile	2007-02-09 18:27:41.000000000 +0100
++++ linux-2.6.20/drivers/mfd/Makefile	2007-02-09 19:29:23.000000000 +0100
+@@ -6,7 +6,7 @@
+ obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
+ obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
+ obj-$(CONFIG_MCP_UCB1200_TS)	+= ucb1x00-ts.o
+-
++obj-$(CONFIG_MCP_UCB1200_SWITCHES) += ucb1x00-switches.o
+ ifeq ($(CONFIG_SA1100_ASSABET),y)
+ obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
+ endif
+diff -uNr linux-2.6.20.vanilla/drivers/mfd/ucb1x00-switches.c linux-2.6.20/drivers/mfd/ucb1x00-switches.c
+--- linux-2.6.20.vanilla/drivers/mfd/ucb1x00-switches.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.20/drivers/mfd/ucb1x00-switches.c	2007-02-09 19:30:34.000000000 +0100
+@@ -0,0 +1,200 @@
++/*
++ *  linux/drivers/mfd/ucb1x00-switches.c
++ *
++ *  Copyright (C) 2007 Bernhard Guillon.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License.
++ *
++ *  This driver is for the Switches of Siemens SIMpad (CL4,SL4,SLC), T-Sinus-Pad and
++ *  Swisscom WP50 devices.
++ *
++ *  Six switches are routed to GPIO pins on the UCB1300: S3 -- S8.
++ *
++ *  This driver is based on the 2.4 ucb1x00-switches, the 2.6 ucb1x00-assabet
++ *  and the ucb1x00-ts driver.
++ *
++ */
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/device.h>
++
++#include <asm/dma.h>
++
++#include "ucb1x00.h"
++
++struct ucb1x00_switches {
++	struct input_dev	*idev;
++	struct ucb1x00		*ucb;
++};
++
++static void ucb1x00_dev_irq(int idx, void *id)
++{
++	static unsigned short int last;
++	unsigned short int this;	
++	struct ucb1x00_switches *switches = id;
++	struct input_dev *idev = switches->idev;
++	ucb1x00_enable(switches->ucb);
++	
++	//check if it really is a event this is not real neccessary because input dev checkes it itself a second.
++	this=~ucb1x00_io_read(switches->ucb);
++	if (this==last) {
++		 return;
++	}
++
++	last=this;
++	switch (idx) {
++
++	case 0:
++
++		if ((this & (1<<0)) != 0) input_report_key(idev, KEY_PROG1, 1);
++		else input_report_key(idev, KEY_PROG1, 0);
++		break;
++
++	case 1:
++
++		if ((this & (1<<1)) != 0) input_report_key(idev, KEY_PROG2, 1);
++		else input_report_key(idev, KEY_PROG2, 0);
++		break;
++
++	case 2:
++
++		if ((this & (1<<2)) != 0) input_report_key(idev, KEY_UP, 1); 
++		else input_report_key(idev, KEY_UP, 0); 
++		break;
++
++	case 3:
++
++		if ((this & (1<<3)) != 0) input_report_key(idev, KEY_DOWN, 1); 
++		else input_report_key(idev, KEY_DOWN, 0); 
++		break;
++
++	case 4:
++
++		if ((this & (1<<4)) != 0) input_report_key(idev, KEY_LEFT, 1);
++		else input_report_key(idev, KEY_LEFT, 0);
++		break;
++
++	case 5:
++
++		if ((this & (1<<5)) != 0) input_report_key(idev, KEY_RIGHT, 1);
++		else input_report_key(idev, KEY_RIGHT, 0);
++		break;
++
++	default:
++
++		printk(KERN_DEBUG "switches-ucb1x00 is BUGGY!!! \n");
++
++	}
++
++	ucb1x00_disable_irq(switches->ucb, UCB_IRQ_TSPX, UCB_FALLING);
++	
++}
++
++static int ucb1x00_switches_add(struct ucb1x00_dev *dev)
++{
++	struct ucb1x00_switches *switches;
++	struct input_dev *idev;
++	int err,i;
++	
++	switches = kzalloc(sizeof(struct ucb1x00_switches), GFP_KERNEL);
++	idev = input_allocate_device();
++
++
++	if (!switches || !idev) {
++		err = -ENOMEM;
++		goto fail;
++	}
++
++	switches->ucb = dev->ucb;
++	
++
++	idev->private    = switches;
++	idev->name       = "SIMpad Switches";
++	idev->id.product = switches->ucb->id;
++	
++	__set_bit(EV_KEY,    idev->evbit);
++	__set_bit(EV_REP,    idev->evbit);
++	__set_bit(KEY_PROG1,    idev->keybit);
++	__set_bit(KEY_PROG2,    idev->keybit);
++	__set_bit(KEY_UP,    idev->keybit);
++	__set_bit(KEY_DOWN,    idev->keybit);
++	__set_bit(KEY_LEFT,    idev->keybit);
++	__set_bit(KEY_RIGHT,    idev->keybit);
++	
++	err = input_register_device(idev);
++	if (err)
++		goto fail;
++	switches->idev = idev;
++	dev->priv = switches;
++	
++	ucb1x00_enable(switches->ucb);
++
++	ucb1x00_io_set_dir(switches->ucb,
++			   UCB_IO_0 | UCB_IO_1 | UCB_IO_2 |
++			   UCB_IO_3 | UCB_IO_4 | UCB_IO_5, 
++			   UCB_IO_8 | UCB_IO_9);
++
++	ucb1x00_disable(switches->ucb);
++	
++	for (i = 0; i < 6; ++i) {
++		ucb1x00_enable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
++		if (ucb1x00_hook_irq(switches->ucb, i, ucb1x00_dev_irq, switches) < 0) {
++			printk(KERN_ERR "unable to hook IRQ for "
++			       "UCB1300 SWITCH_%d\n", i);
++			return -EBUSY;
++		}
++	}
++		
++	return 0;
++
++fail:
++	input_free_device(idev);
++	kfree(switches);
++	return err;
++
++}
++
++static void ucb1x00_switches_remove(struct ucb1x00_dev *dev)
++{
++	int i;
++	struct ucb1x00_switches *switches = dev->priv;
++	input_unregister_device(switches->idev);
++		
++	for (i = 5; i >= 0; --i) {
++
++		ucb1x00_disable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
++
++		/* Only error conditions are ENOENT and EINVAL; silently
++		 * ignore:
++		 */
++		ucb1x00_free_irq(switches->ucb, i, NULL);
++
++	}
++	ucb1x00_disable(switches->ucb);
++	kfree(switches);
++}
++
++static struct ucb1x00_driver ucb1x00_switches_driver = {
++	.add	= ucb1x00_switches_add,
++	.remove	= ucb1x00_switches_remove,
++};
++
++static int __init ucb1x00_switches_init(void)
++{
++	return ucb1x00_register_driver(&ucb1x00_switches_driver);
++}
++
++static void __exit ucb1x00_switches_exit(void)
++{
++	ucb1x00_unregister_driver(&ucb1x00_switches_driver);
++}
++
++module_init(ucb1x00_switches_init);
++module_exit(ucb1x00_switches_exit);
++
++MODULE_AUTHOR("Bernhard Guillon <Bernhard.Guillon@opensimpad.org>");
++MODULE_DESCRIPTION("UCB1x00 Switches driver for Siemens SIMpad");
++MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux_2.6.20.bb b/packages/linux/linux_2.6.20.bb
index ebf520d3d6..f4372186e6 100644
--- a/packages/linux/linux_2.6.20.bb
+++ b/packages/linux/linux_2.6.20.bb
@@ -8,10 +8,15 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
 SRC_URI_append_progear = " \
            file://progear_bl-r6.patch;patch=1 \
 	   "
+SRC_URI_append_simpad = "\
+           file://linux-2.6.20.SIMpad.mq200.patch;patch=1 \
+           file://linux-2.6.20.SIMpad.ucb1x00-switches.patch;patch=1 \
+	   "
 
 inherit kernel
 
 KERNEL_IMAGETYPE = "bzImage"
+KERNEL_IMAGETYPE_simpad = "bzImage"
 
 do_configure_prepend() {
 	install -m 0644 ${WORKDIR}/defconfig ${S}/.config
-- 
cgit v1.2.3


From 3d7e7c742cfee803d94dfaea8c1cff48b5ad67f9 Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Thu, 15 Feb 2007 02:11:27 +0000
Subject: ixp4xx-kernel: Make the FIS directory partition writeable so it can
 be updated

---
 packages/linux/ixp4xx-kernel/2.6.19/defconfig | 2 +-
 packages/linux/ixp4xx-kernel/2.6.20/defconfig | 2 +-
 packages/linux/ixp4xx-kernel_2.6.19.bb        | 2 +-
 packages/linux/ixp4xx-kernel_2.6.20.bb        | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/ixp4xx-kernel/2.6.19/defconfig b/packages/linux/ixp4xx-kernel/2.6.19/defconfig
index 56eaea7a27..58d6a39c8d 100644
--- a/packages/linux/ixp4xx-kernel/2.6.19/defconfig
+++ b/packages/linux/ixp4xx-kernel/2.6.19/defconfig
@@ -513,7 +513,7 @@ CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
 
diff --git a/packages/linux/ixp4xx-kernel/2.6.20/defconfig b/packages/linux/ixp4xx-kernel/2.6.20/defconfig
index 93380dd3b9..d9a1bbc22f 100644
--- a/packages/linux/ixp4xx-kernel/2.6.20/defconfig
+++ b/packages/linux/ixp4xx-kernel/2.6.20/defconfig
@@ -529,7 +529,7 @@ CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
 
diff --git a/packages/linux/ixp4xx-kernel_2.6.19.bb b/packages/linux/ixp4xx-kernel_2.6.19.bb
index eba9d6a404..293f06a8e1 100644
--- a/packages/linux/ixp4xx-kernel_2.6.19.bb
+++ b/packages/linux/ixp4xx-kernel_2.6.19.bb
@@ -6,7 +6,7 @@
 # http://trac.nslu2-linux.org/kernel/
 #
 # The revision that is pulled from SVN is specified below
-IXP4XX_KERNEL_SVN_REV = "693"
+IXP4XX_KERNEL_SVN_REV = "698"
 #
 # The directory containing the patches to be applied is
 # specified below
diff --git a/packages/linux/ixp4xx-kernel_2.6.20.bb b/packages/linux/ixp4xx-kernel_2.6.20.bb
index 2e768b133b..434fed24d5 100644
--- a/packages/linux/ixp4xx-kernel_2.6.20.bb
+++ b/packages/linux/ixp4xx-kernel_2.6.20.bb
@@ -6,7 +6,7 @@
 # http://trac.nslu2-linux.org/kernel/
 #
 # The revision that is pulled from SVN is specified below
-IXP4XX_KERNEL_SVN_REV = "693"
+IXP4XX_KERNEL_SVN_REV = "698"
 #
 # The directory containing the patches to be applied is
 # specified below
-- 
cgit v1.2.3


From 96fde83825d268eb150b9043ed70441e2ab347ea Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Thu, 15 Feb 2007 05:56:39 +0000
Subject: ixp4xx-kernel.inc: Fixed a typo (no change to functionality)

---
 packages/linux/ixp4xx-kernel.inc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'packages/linux')

diff --git a/packages/linux/ixp4xx-kernel.inc b/packages/linux/ixp4xx-kernel.inc
index d848427921..57d3028742 100644
--- a/packages/linux/ixp4xx-kernel.inc
+++ b/packages/linux/ixp4xx-kernel.inc
@@ -337,7 +337,7 @@ install_image() {
 do_install_append() {
 	# Overwrite the unshimmed generic image with a shimmed one (but without
 	# any command line or machine id override).
-	rm -f '${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERISON}'
+	rm -f '${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}'
 	install_image '${MACHINE_ARCH}'
 
 	# Add the machine specific images, with appropriate suffixes
-- 
cgit v1.2.3


From 1add4de0c279186cceb9334c2a1d6bbbb2cad7a6 Mon Sep 17 00:00:00 2001
From: Koen Kooi <koen@openembedded.org>
Date: Fri, 16 Feb 2007 07:33:25 +0000
Subject: linux-gta01: update to 2.6.20

---
 packages/linux/gta01-kernel_2.6.bb                 |    1 +
 packages/linux/linux-gta01/.mtn2git_empty          |    0
 .../linux/linux-gta01/defconfig-2.6.20-fic-gta01   | 1771 ++++++++++++++++++++
 packages/linux/linux-gta01/defconfig-fic-gta01     | 1621 ++++++++++++++++++
 .../linux/linux-gta01/udc-nomodule-misccr.patch    |   22 +
 packages/linux/linux-gta01_2.6.17.14.bb            |  101 ++
 packages/linux/linux-gta01_2.6.17.7.bb             |   97 ++
 packages/linux/linux-gta01_2.6.20.bb               |  102 ++
 8 files changed, 3715 insertions(+)
 create mode 100644 packages/linux/gta01-kernel_2.6.bb
 create mode 100644 packages/linux/linux-gta01/.mtn2git_empty
 create mode 100644 packages/linux/linux-gta01/defconfig-2.6.20-fic-gta01
 create mode 100644 packages/linux/linux-gta01/defconfig-fic-gta01
 create mode 100644 packages/linux/linux-gta01/udc-nomodule-misccr.patch
 create mode 100644 packages/linux/linux-gta01_2.6.17.14.bb
 create mode 100644 packages/linux/linux-gta01_2.6.17.7.bb
 create mode 100644 packages/linux/linux-gta01_2.6.20.bb

(limited to 'packages/linux')

diff --git a/packages/linux/gta01-kernel_2.6.bb b/packages/linux/gta01-kernel_2.6.bb
new file mode 100644
index 0000000000..eaafb7e7b2
--- /dev/null
+++ b/packages/linux/gta01-kernel_2.6.bb
@@ -0,0 +1 @@
+require linux-gta01_2.6.17.14.bb
diff --git a/packages/linux/linux-gta01/.mtn2git_empty b/packages/linux/linux-gta01/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/packages/linux/linux-gta01/defconfig-2.6.20-fic-gta01 b/packages/linux/linux-gta01/defconfig-2.6.20-fic-gta01
new file mode 100644
index 0000000000..948ccd6f70
--- /dev/null
+++ b/packages/linux/linux-gta01/defconfig-2.6.20-fic-gta01
@@ -0,0 +1,1771 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Thu Feb 15 23:04:12 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-moko7"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=m
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=m
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# S3C24XX Implementations
+#
+# CONFIG_MACH_AML_M5900 is not set
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_MACH_N30 is not set
+# CONFIG_ARCH_SMDK2410 is not set
+CONFIG_MACH_QT2410=y
+CONFIG_MACH_GTA01=y
+# CONFIG_ARCH_S3C2440 is not set
+# CONFIG_MACH_SMDK2413 is not set
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_RX3715 is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_NEXCODER_2440 is not set
+# CONFIG_MACH_VSTMS is not set
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2410_PM=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_CPU_S3C2410=y
+
+#
+# S3C2410 Boot
+#
+# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+CONFIG_S3C2410_BOOT_ERROR_RESET=y
+
+#
+# S3C2410 Setup
+#
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C2410_PM_DEBUG=y
+CONFIG_S3C2410_PM_CHECK=y
+CONFIG_S3C2410_PM_CHECK_CHUNKSIZE=64
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=200
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySAC0,115200n8  ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_DEBUG=y
+CONFIG_DISABLE_CONSOLE_SUSPEND=y
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_CLK_JIFFIES is not set
+CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_S3C2410=y
+CONFIG_MTD_NAND_S3C2410_BBT=y
+CONFIG_MTD_NAND_S3C2410_DEBUG=y
+# CONFIG_MTD_NAND_S3C2410_HWECC is not set
+CONFIG_MTD_NAND_S3C2410_CLKSTOP=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NET_PCI=y
+CONFIG_CS89x0=m
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_GTA01=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+CONFIG_TOUCHSCREEN_S3C2410=y
+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_S3C2410=y
+CONFIG_SERIAL_S3C2410_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_S3C2410_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TS0710_MUX is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_PCF50606=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_S3C24XX_GPIO=y
+CONFIG_SPI_S3C24XX=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SLAVE_JBT6K74=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_S3C24XX=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_GTA01=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=y
+
+#
+# Soc Platforms
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Freescale i.MX
+#
+
+#
+# SoC Audio for the Samsung S3C24XX
+#
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=y
+CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=y
+
+#
+# Soc Codecs
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+CONFIG_SND_SOC_WM8753=y
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8956 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+CONFIG_SND_SOC_WM8976=y
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8980 is not set
+# CONFIG_SND_SOC_WM9713 is not set
+# CONFIG_SND_SOC_WM9712 is not set
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_S3C2410=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_S3C=m
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DEBUG=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_S3C=m
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C2410_PORT=y
+CONFIG_DEBUG_S3C2410_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/packages/linux/linux-gta01/defconfig-fic-gta01 b/packages/linux/linux-gta01/defconfig-fic-gta01
new file mode 100644
index 0000000000..40adbcd1a1
--- /dev/null
+++ b/packages/linux/linux-gta01/defconfig-fic-gta01
@@ -0,0 +1,1621 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17.14
+# Tue Feb 13 20:26:21 2007
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-moko7"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=m
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=m
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# S3C24XX Implementations
+#
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_MACH_N30 is not set
+# CONFIG_ARCH_SMDK2410 is not set
+CONFIG_MACH_QT2410=y
+CONFIG_MACH_GTA01=y
+# CONFIG_ARCH_S3C2440 is not set
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_RX3715 is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_NEXCODER_2440 is not set
+CONFIG_CPU_S3C2410=y
+
+#
+# S3C2410 Boot
+#
+CONFIG_S3C2410_BOOT_ERROR_RESET=y
+
+#
+# S3C2410 Setup
+#
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C2410_PM_DEBUG=y
+CONFIG_S3C2410_PM_CHECK=y
+CONFIG_S3C2410_PM_CHECK_CHUNKSIZE=64
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=200
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySAC0,115200n8  ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_DEBUG=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+# CONFIG_IP_NF_TARGET_SAME is not set
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_TTL=m
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_CLK_JIFFIES is not set
+CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_S3C2410=y
+CONFIG_MTD_NAND_S3C2410_BBT=y
+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
+# CONFIG_MTD_NAND_S3C2410_HWECC is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NET_PCI=y
+CONFIG_CS89x0=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_GTA01=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+CONFIG_TOUCHSCREEN_S3C2410=y
+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_S3C2410=y
+CONFIG_SERIAL_S3C2410_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_S3C2410_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+# CONFIG_TS0710_MUX is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_PCF50606=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_S3C24XX_GPIO=y
+CONFIG_SPI_S3C24XX=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SLAVE_JBT6K74=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_GTA01=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=y
+
+#
+# Soc Platforms
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Freescale i.MX
+#
+
+#
+# SoC Audio for the Samsung S3C24XX
+#
+CONFIG_SND_S3C24XX_SOC=m
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m
+
+#
+# Soc Codecs
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+CONFIG_SND_SOC_WM8753=m
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8956 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+CONFIG_SND_SOC_WM8976=m
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8980 is not set
+# CONFIG_SND_SOC_WM9713 is not set
+# CONFIG_SND_SOC_WM9712 is not set
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ANYDATA=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_S3C2410=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_S3C=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=m
+CONFIG_JFFS_FS_VERBOSE=0
+# CONFIG_JFFS_PROC_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_UNWIND_INFO=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C2410_PORT=y
+CONFIG_DEBUG_S3C2410_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/packages/linux/linux-gta01/udc-nomodule-misccr.patch b/packages/linux/linux-gta01/udc-nomodule-misccr.patch
new file mode 100644
index 0000000000..0f84b56c2a
--- /dev/null
+++ b/packages/linux/linux-gta01/udc-nomodule-misccr.patch
@@ -0,0 +1,22 @@
+Index: linux-2.6.17.14-fic1/drivers/usb/gadget/s3c2410_udc.c
+===================================================================
+--- linux-2.6.17.14-fic1.orig/drivers/usb/gadget/s3c2410_udc.c	2006-11-03 01:22:14.000000000 +0100
++++ linux-2.6.17.14-fic1/drivers/usb/gadget/s3c2410_udc.c	2006-11-03 12:41:52.000000000 +0100
+@@ -1492,7 +1492,7 @@
+ 		return -ENODEV;
+ 	if (udc->driver)
+ 		return -EBUSY;
+-	if (!driver->bind || !driver->unbind || !driver->setup
++	if (!driver->bind || !driver->setup
+ 			|| driver->speed == USB_SPEED_UNKNOWN)
+ 		return -EINVAL;
+ 
+@@ -1700,6 +1700,8 @@
+ 	}
+ 	dprintk(DEBUG_VERBOSE, "%s: got irq %i\n", gadget_name, IRQ_USBD);
+ 
++	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND0|S3C2410_MISCCR_USBSUSPND1, 0);
++
+ #ifdef ENABLE_SYSFS
+ 	/* create device files */
+ 	device_create_file(&pdev->dev, &dev_attr_regs);
diff --git a/packages/linux/linux-gta01_2.6.17.14.bb b/packages/linux/linux-gta01_2.6.17.14.bb
new file mode 100644
index 0000000000..8f3c37753a
--- /dev/null
+++ b/packages/linux/linux-gta01_2.6.17.14.bb
@@ -0,0 +1,101 @@
+DESCRIPTION = "2.6 Linux Development Kernel for FIC Neo1973 (GTA01)"
+SECTION = "kernel"
+AUTHOR = "Harald Welte <laforge@openmoko.org>"
+HOMEPAGE = "N/A"
+LICENSE = "GPL"
+DEPENDS += "uboot-gta01"
+MOKOR = "moko7"
+PR = "${MOKOR}-r1"
+
+inherit kernel
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-gta01"
+#HWSRC = "http://people.gta01.openmoko.org/laforge/src/kernel/20060806"
+
+##############################################################
+# source and patches
+#
+SRC_URI = "http://ftp.de.kernel.org/pub/linux/kernel/v2.6/linux-2.6.17.14.tar.bz2 \
+           svn://svn.openmoko.org/trunk/src/target/kernel;module=patches;proto=https \
+           file://defconfig-${MACHINE}"
+S = "${WORKDIR}/linux-2.6.17.14"
+
+##############################################################
+# kernel image resides on a seperate flash partition (for now)
+#
+FILES_kernel-image = ""
+ALLOW_EMPTY = "1"
+
+COMPATIBLE_MACHINE = 'fic-gta01'
+
+CMDLINE_CON = "console=ttySAC0,115200n8"
+#CMDLINE_ROOT = "root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5"
+# uncomment if you want to boot over NFS
+#CMDLINE_ROOT = "root=/dev/nfs nfsroot=192.168.1.10:/export/opie-image rootdelay=5 3"
+# uncomment to enable dyntick
+#CMDLINE_OTHER = "dyntick=enable"
+CMDLINE_DEBUG = '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}'
+CMDLINE_IP = "ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off"
+CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG}"
+
+###############################################################
+# module configs specific to this kernel
+#
+module_autoload_ohci-hcd = "ohci-hcd"
+module_autoload_g_ether = "g_ether"
+#module_autoload_snd-pcm-oss = "snd-pcm-oss"
+#module_autoload_snd-soc-corgi_c7x0 = "snd-soc-s3c24xx"
+
+do_prepatch() {
+        mv ${WORKDIR}/patches ${S}/patches && cd ${S} && quilt push -av
+        rm -Rf patches .pc
+}
+
+do_configure() {
+	#install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+
+	if [ ! -e ${WORKDIR}/defconfig-${MACHINE} ]; then
+		die "No default configuration for ${MACHINE} available."
+	fi
+
+	echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+
+	if [ "${TARGET_OS}" == "linux-gnueabi" ]; then
+		echo "CONFIG_AEABI=y"                   >> ${S}/.config
+		echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+	else 
+		echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+		echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+	fi
+
+	sed -e '/CONFIG_AEABI/d' \
+	    -e '/CONFIG_OABI_COMPAT=/d' \
+	    -e '/CONFIG_CMDLINE=/d' \
+	    -e '/CONFIG_MTD_MTDRAM_SA1100=/d' \
+	    -e '/CONFIG_MTDRAM_TOTAL_SIZE=/d' \
+	    -e '/CONFIG_MTDRAM_ERASE_SIZE=/d' \
+	    -e '/CONFIG_MTDRAM_ABS_POS=/d' \
+	    '${WORKDIR}/defconfig-${MACHINE}' >>'${S}/.config'
+
+	yes '' | oe_runmake oldconfig
+}
+
+###############################################################
+# put into deploy directory and append u-boot header
+#
+do_deploy() {
+	install -d ${DEPLOY_DIR_IMAGE}
+	install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}-${DATETIME}.bin
+	tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE}.tgz -C ${D} lib
+	arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux linux.bin
+	rm -f linux.bin.gz
+	gzip -9 linux.bin
+	uboot-mkimage -A arm -O linux -T kernel -C gzip -a 30008000 -e 30008000 -n "OpenMoko Kernel Image Neo1973(GTA01)" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE}-${DATETIME}.bin
+	rm -f linux.bin.gz
+}
+
+do_deploy[dirs] = "${S}"
+
+addtask prepatch before do_patch after do_unpack
+addtask deploy before do_package after do_install
+
diff --git a/packages/linux/linux-gta01_2.6.17.7.bb b/packages/linux/linux-gta01_2.6.17.7.bb
new file mode 100644
index 0000000000..cf4bfeb8ea
--- /dev/null
+++ b/packages/linux/linux-gta01_2.6.17.7.bb
@@ -0,0 +1,97 @@
+DESCRIPTION = "2.6 Linux Development Kernel for FIC GTA01"
+SECTION = "kernel"
+AUTHOR = "Harald Welte <hwelte@hmw-consulting.de>"
+HOMEPAGE = "N/A"
+LICENSE = "GPL"
+DEPENDS += "uboot-gta01"
+PR = "r4"
+
+inherit kernel
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-gta01"
+HWSRC = "http://people.gta01.hmw-consulting.de/laforge/src/kernel/20060806"
+
+##############################################################
+# source and patches
+#
+SRC_URI = "http://people.gta01.hmw-consulting.de/laforge/tmp/linux-2.6.17.7-gta01-lcm.tar.bz2 \
+           file://defconfig-${MACHINE}"
+S = "${WORKDIR}/linux-2.6.17.7-new"
+
+##############################################################
+# kernel image resides on a seperate flash partition (for now)
+#
+FILES_kernel-image = ""
+ALLOW_EMPTY = "1"
+
+COMPATIBLE_MACHINE = 'fic-gta01'
+
+CMDLINE_CON = "console=ttySAC0,115200n8"
+#CMDLINE_ROOT = "root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5"
+# uncomment if you want to boot over NFS
+#CMDLINE_ROOT = "root=/dev/nfs nfsroot=192.168.1.10:/export/opie-image rootdelay=5 3"
+# uncomment to enable dyntick
+#CMDLINE_OTHER = "dyntick=enable"
+CMDLINE_DEBUG = '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}'
+CMDLINE_IP = "ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off"
+CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG}"
+
+###############################################################
+# module configs specific to this kernel
+#
+#module_autoload_pxaficp_ir = "pxaficp_ir"
+#module_autoload_snd-pcm-oss = "snd-pcm-oss"
+
+do_prepatch() {
+        mv ${WORKDIR}/patches ${S}/patches && cd ${S} && quilt push -av
+        rm -Rf patches .pc
+}
+
+do_configure() {
+	#install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+
+	if [ ! -e ${WORKDIR}/defconfig-${MACHINE} ]; then
+		die "No default configuration for ${MACHINE} available."
+	fi
+
+	echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+
+	if [ "${TARGET_OS}" == "linux-gnueabi" ]; then
+		echo "CONFIG_AEABI=y"                   >> ${S}/.config
+		echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+	else 
+		echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+		echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+	fi
+
+	sed -e '/CONFIG_AEABI/d' \
+	    -e '/CONFIG_OABI_COMPAT=/d' \
+	    -e '/CONFIG_CMDLINE=/d' \
+	    -e '/CONFIG_MTD_MTDRAM_SA1100=/d' \
+	    -e '/CONFIG_MTDRAM_TOTAL_SIZE=/d' \
+	    -e '/CONFIG_MTDRAM_ERASE_SIZE=/d' \
+	    -e '/CONFIG_MTDRAM_ABS_POS=/d' \
+	    '${WORKDIR}/defconfig-${MACHINE}' >>'${S}/.config'
+
+	yes '' | oe_runmake oldconfig
+}
+
+###############################################################
+# put into deploy directory and append u-boot header
+#
+do_deploy() {
+	install -d ${DEPLOY_DIR_IMAGE}
+	install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin
+	tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib
+	arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux linux.bin
+	rm -f linux.bin.gz
+	gzip -9 linux.bin
+	uboot-mkimage -A arm -O linux -T kernel -C gzip -a 30008000 -e 30008000 -n "Kernel Image QT2410" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${MACHINE}-${DATETIME}.bin
+	rm -f linux.bin.gz
+}
+
+do_deploy[dirs] = "${S}"
+
+addtask prepatch before do_patch after do_unpack
+addtask deploy before do_package after do_install
+
diff --git a/packages/linux/linux-gta01_2.6.20.bb b/packages/linux/linux-gta01_2.6.20.bb
new file mode 100644
index 0000000000..a922abd701
--- /dev/null
+++ b/packages/linux/linux-gta01_2.6.20.bb
@@ -0,0 +1,102 @@
+DESCRIPTION = "2.6 Linux Development Kernel for FIC Neo1973 (GTA01)"
+SECTION = "kernel"
+AUTHOR = "Harald Welte <laforge@openmoko.org>"
+HOMEPAGE = "N/A"
+LICENSE = "GPL"
+DEPENDS += "uboot-gta01"
+MOKOR = "moko7"
+PR = "${MOKOR}-r1"
+
+VANILLA_VERSION = "2.6.20"
+
+inherit kernel
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-gta01"
+
+##############################################################
+# source and patches
+#
+SRC_URI = "http://ftp.de.kernel.org/pub/linux/kernel/v2.6/linux-${VANILLA_VERSION}.tar.bz2 \
+           svn://svn.openmoko.org/trunk/src/target/kernel;module=patches;proto=http \
+           file://defconfig-${VANILLA_VERSION}-${MACHINE}"
+S = "${WORKDIR}/linux-${VANILLA_VERSION}"
+
+##############################################################
+# kernel image resides on a seperate flash partition (for now)
+#
+FILES_kernel-image = ""
+ALLOW_EMPTY = "1"
+
+COMPATIBLE_MACHINE = 'fic-gta01'
+
+CMDLINE_CON = "console=ttySAC0,115200n8"
+#CMDLINE_ROOT = "root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5"
+# uncomment if you want to boot over NFS
+#CMDLINE_ROOT = "root=/dev/nfs nfsroot=192.168.1.10:/export/opie-image rootdelay=5 3"
+# uncomment to enable dyntick
+#CMDLINE_OTHER = "dyntick=enable"
+CMDLINE_DEBUG = '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}'
+CMDLINE_IP = "ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off"
+CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG}"
+
+###############################################################
+# module configs specific to this kernel
+#
+module_autoload_ohci-hcd = "ohci-hcd"
+module_autoload_g_ether = "g_ether"
+#module_autoload_snd-pcm-oss = "snd-pcm-oss"
+#module_autoload_snd-soc-corgi_c7x0 = "snd-soc-s3c24xx"
+
+do_prepatch() {
+        mv ${WORKDIR}/patches ${S}/patches && cd ${S} && quilt push -av
+        rm -Rf patches .pc
+}
+
+do_configure() {
+	#install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+
+	if [ ! -e ${WORKDIR}/defconfig-${VANILLA_VERSION}-${MACHINE} ]; then
+		die "No default configuration for ${MACHINE} available."
+	fi
+
+	echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+
+	if [ "${TARGET_OS}" == "linux-gnueabi" ]; then
+		echo "CONFIG_AEABI=y"                   >> ${S}/.config
+		echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+	else 
+		echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+		echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+	fi
+
+	sed -e '/CONFIG_AEABI/d' \
+	    -e '/CONFIG_OABI_COMPAT=/d' \
+	    -e '/CONFIG_CMDLINE=/d' \
+	    -e '/CONFIG_MTD_MTDRAM_SA1100=/d' \
+	    -e '/CONFIG_MTDRAM_TOTAL_SIZE=/d' \
+	    -e '/CONFIG_MTDRAM_ERASE_SIZE=/d' \
+	    -e '/CONFIG_MTDRAM_ABS_POS=/d' \
+	    '${WORKDIR}/defconfig-${VANILLA_VERSION}-${MACHINE}' >>'${S}/.config'
+
+	yes '' | oe_runmake oldconfig
+}
+
+###############################################################
+# put into deploy directory and append u-boot header
+#
+do_deploy() {
+	install -d ${DEPLOY_DIR_IMAGE}
+	install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}-${DATETIME}.bin
+	tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE}.tgz -C ${D} lib
+	${OBJCOPY} -O binary -R .note -R .comment -S vmlinux linux.bin
+	rm -f linux.bin.gz
+	gzip -9 linux.bin
+	uboot-mkimage -A arm -O linux -T kernel -C gzip -a 30008000 -e 30008000 -n "OpenMoko Kernel Image Neo1973(GTA01)" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE}-${DATETIME}.bin
+	rm -f linux.bin.gz
+}
+
+do_deploy[dirs] = "${S}"
+
+addtask prepatch before do_patch after do_unpack
+addtask deploy before do_package after do_install
+
-- 
cgit v1.2.3


From 023951cb465a525ab34af79e21810bfddd087eaa Mon Sep 17 00:00:00 2001
From: Marcin Juszkiewicz <hrw@openembedded.org>
Date: Fri, 16 Feb 2007 10:42:21 +0000
Subject: linux/simpad: cleaned mq200 patch from backup files, defconfigs -
 spotted by Zecke

---
 .../linux/simpad/linux-2.6.20.SIMpad.mq200.patch   | 3606 --------------------
 1 file changed, 3606 deletions(-)

(limited to 'packages/linux')

diff --git a/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch
index 3c91b2cbf8..6b315de79d 100644
--- a/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch
+++ b/packages/linux/linux/simpad/linux-2.6.20.SIMpad.mq200.patch
@@ -1,1943 +1,3 @@
-diff -uNr linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig linux-2.6.20/arch/arm/configs/simpad_defconfig
---- linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig	2007-02-10 19:01:14.000000000 +0100
-+++ linux-2.6.20/arch/arm/configs/simpad_defconfig	2007-02-11 16:39:39.000000000 +0100
-@@ -1,75 +1,121 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.12-rc1-bk2
--# Mon Mar 28 00:10:36 2005
-+# Linux kernel version: 2.6.19.1
-+# Tue Jan  2 22:07:26 2007
- #
- CONFIG_ARM=y
-+# CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
--CONFIG_UID16=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
--CONFIG_GENERIC_IOMAP=y
-+CONFIG_ARCH_MTD_XIP=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
- 
- #
- # Code maturity level options
- #
- CONFIG_EXPERIMENTAL=y
--CONFIG_CLEAN_COMPILE=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_LOCK_KERNEL=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
- 
- #
- # General setup
- #
- CONFIG_LOCALVERSION="oe1"
-+CONFIG_LOCALVERSION_AUTO=y
- CONFIG_SWAP=y
- CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
--CONFIG_SYSCTL=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
- # CONFIG_AUDIT is not set
--CONFIG_HOTPLUG=y
--CONFIG_KOBJECT_UEVENT=y
- # CONFIG_IKCONFIG is not set
-+# CONFIG_RELAY is not set
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
- CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
- CONFIG_KALLSYMS=y
- CONFIG_KALLSYMS_ALL=y
- CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
- CONFIG_EPOLL=y
--CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SHMEM=y
--CONFIG_CC_ALIGN_FUNCTIONS=0
--CONFIG_CC_ALIGN_LABELS=0
--CONFIG_CC_ALIGN_LOOPS=0
--CONFIG_CC_ALIGN_JUMPS=0
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
- 
- #
- # Loadable module support
- #
- CONFIG_MODULES=y
- # CONFIG_MODULE_UNLOAD is not set
--CONFIG_OBSOLETE_MODPARM=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
- 
- #
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
- # System Type
- #
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
- # CONFIG_ARCH_CLPS7500 is not set
- # CONFIG_ARCH_CLPS711X is not set
- # CONFIG_ARCH_CO285 is not set
- # CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
- # CONFIG_ARCH_FOOTBRIDGE is not set
--# CONFIG_ARCH_INTEGRATOR is not set
--# CONFIG_ARCH_IOP3XX is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
- CONFIG_ARCH_SA1100=y
-@@ -77,9 +123,6 @@
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
- # CONFIG_ARCH_OMAP is not set
--# CONFIG_ARCH_VERSATILE is not set
--# CONFIG_ARCH_IMX is not set
--# CONFIG_ARCH_H720X is not set
- 
- #
- # SA11x0 Implementations
-@@ -109,11 +152,14 @@
- CONFIG_CPU_CACHE_V4WB=y
- CONFIG_CPU_CACHE_VIVT=y
- CONFIG_CPU_TLB_V4WB=y
--CONFIG_CPU_MINICACHE=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
- 
- #
- # Processor Features
- #
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
- 
- #
- # Bus support
-@@ -126,6 +172,8 @@
- CONFIG_PCCARD=y
- # CONFIG_PCMCIA_DEBUG is not set
- CONFIG_PCMCIA=y
-+CONFIG_PCMCIA_LOAD_CIS=y
-+CONFIG_PCMCIA_IOCTL=y
- 
- #
- # PC-card bridges
-@@ -138,7 +186,21 @@
- # Kernel Features
- #
- CONFIG_PREEMPT=y
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-+CONFIG_NODES_SHIFT=2
-+CONFIG_SELECT_MEMORY_MODEL=y
-+# CONFIG_FLATMEM_MANUAL is not set
-+CONFIG_DISCONTIGMEM_MANUAL=y
-+# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_DISCONTIGMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_NEED_MULTIPLE_NODES=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
- CONFIG_LEDS=y
- CONFIG_LEDS_TIMER=y
- # CONFIG_LEDS_CPU is not set
-@@ -181,9 +243,161 @@
- #
- CONFIG_PM=y
- # CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+# CONFIG_PM_SYSFS_DEPRECATED is not set
- CONFIG_APM=y
- 
- #
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+CONFIG_IRDA=m
-+
-+#
-+# IrDA protocols
-+#
-+CONFIG_IRLAN=m
-+CONFIG_IRNET=m
-+CONFIG_IRCOMM=m
-+# CONFIG_IRDA_ULTRA is not set
-+
-+#
-+# IrDA options
-+#
-+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-+# CONFIG_IRDA_FAST_RR is not set
-+# CONFIG_IRDA_DEBUG is not set
-+
-+#
-+# Infrared-port device drivers
-+#
-+
-+#
-+# SIR device drivers
-+#
-+CONFIG_IRTTY_SIR=m
-+
-+#
-+# Dongle support
-+#
-+# CONFIG_DONGLE is not set
-+
-+#
-+# Old SIR device drivers
-+#
-+CONFIG_IRPORT_SIR=m
-+
-+#
-+# Old Serial dongle support
-+#
-+# CONFIG_DONGLE_OLD is not set
-+
-+#
-+# FIR device drivers
-+#
-+CONFIG_SA1100_FIR=m
-+CONFIG_BT=m
-+CONFIG_BT_L2CAP=m
-+CONFIG_BT_SCO=m
-+CONFIG_BT_RFCOMM=m
-+CONFIG_BT_RFCOMM_TTY=y
-+CONFIG_BT_BNEP=m
-+CONFIG_BT_BNEP_MC_FILTER=y
-+CONFIG_BT_BNEP_PROTO_FILTER=y
-+# CONFIG_BT_HIDP is not set
-+
-+#
-+# Bluetooth device drivers
-+#
-+# CONFIG_BT_HCIUART is not set
-+# CONFIG_BT_HCIDTL1 is not set
-+# CONFIG_BT_HCIBT3C is not set
-+# CONFIG_BT_HCIBLUECARD is not set
-+# CONFIG_BT_HCIBTUART is not set
-+# CONFIG_BT_HCIVHCI is not set
-+# CONFIG_IEEE80211 is not set
-+CONFIG_WIRELESS_EXT=y
-+
-+#
- # Device Drivers
- #
- 
-@@ -192,8 +406,14 @@
- #
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
--CONFIG_FW_LOADER=m
-+CONFIG_FW_LOADER=y
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
- 
- #
- # Memory Technology Devices (MTD)
-@@ -214,6 +434,8 @@
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
- 
- #
- # RAM/ROM/Flash chip drivers
-@@ -236,6 +458,7 @@
- # CONFIG_MTD_CFI_I2 is not set
- # CONFIG_MTD_CFI_I4 is not set
- # CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_OTP is not set
- CONFIG_MTD_CFI_INTELEXT=y
- # CONFIG_MTD_CFI_AMDSTD is not set
- # CONFIG_MTD_CFI_STAA is not set
-@@ -243,6 +466,7 @@
- CONFIG_MTD_RAM=y
- # CONFIG_MTD_ROM is not set
- # CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
- # CONFIG_MTD_XIP is not set
- 
- #
-@@ -252,8 +476,8 @@
- # CONFIG_MTD_PHYSMAP is not set
- # CONFIG_MTD_ARM_INTEGRATOR is not set
- CONFIG_MTD_SA1100=y
--# CONFIG_MTD_EDB7312 is not set
- # CONFIG_MTD_IMPA7 is not set
-+# CONFIG_MTD_PLATRAM is not set
- 
- #
- # Self-contained MTD device drivers
-@@ -261,7 +485,6 @@
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
--# CONFIG_MTD_BLKMTD is not set
- # CONFIG_MTD_BLOCK2MTD is not set
- 
- #
-@@ -277,6 +500,11 @@
- # CONFIG_MTD_NAND is not set
- 
- #
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
- # Parallel port support
- #
- # CONFIG_PARPORT is not set
-@@ -289,8 +517,6 @@
- #
- # Block devices
- #
--# CONFIG_BLK_DEV_FD is not set
--# CONFIG_BLK_DEV_XD is not set
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=m
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-@@ -298,16 +524,9 @@
- CONFIG_BLK_DEV_RAM=m
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
--CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_BLK_DEV_INITRD is not set
- # CONFIG_CDROM_PKTCDVD is not set
--
--#
--# IO Schedulers
--#
--CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
--CONFIG_IOSCHED_DEADLINE=y
--CONFIG_IOSCHED_CFQ=y
- # CONFIG_ATA_OVER_ETH is not set
- 
- #
-@@ -318,7 +537,14 @@
- #
- # SCSI device support
- #
-+# CONFIG_RAID_ATTRS is not set
- # CONFIG_SCSI is not set
-+# CONFIG_SCSI_NETLINK is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
- 
- #
- # Multi-device support (RAID and LVM)
-@@ -328,6 +554,7 @@
- #
- # Fusion MPT device support
- #
-+# CONFIG_FUSION is not set
- 
- #
- # IEEE 1394 (FireWire) support
-@@ -338,136 +565,8 @@
- #
- 
- #
--# Networking support
--#
--CONFIG_NET=y
--
--#
--# Networking options
--#
--CONFIG_PACKET=y
--CONFIG_PACKET_MMAP=y
--# CONFIG_NETLINK_DEV is not set
--CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
--CONFIG_INET=y
--# CONFIG_IP_MULTICAST is not set
--# CONFIG_IP_ADVANCED_ROUTER is not set
--CONFIG_IP_PNP=y
--CONFIG_IP_PNP_DHCP=y
--CONFIG_IP_PNP_BOOTP=y
--# CONFIG_IP_PNP_RARP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
--# CONFIG_ARPD is not set
--# CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
--# CONFIG_INET_IPCOMP is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_IP_TCPDIAG is not set
--# CONFIG_IP_TCPDIAG_IPV6 is not set
--# CONFIG_IPV6 is not set
--# CONFIG_NETFILTER is not set
--
--#
--# SCTP Configuration (EXPERIMENTAL)
--#
--# CONFIG_IP_SCTP is not set
--# CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
--# CONFIG_VLAN_8021Q is not set
--# CONFIG_DECNET is not set
--# CONFIG_LLC2 is not set
--# CONFIG_IPX is not set
--# CONFIG_ATALK is not set
--# CONFIG_X25 is not set
--# CONFIG_LAPB is not set
--# CONFIG_NET_DIVERT is not set
--# CONFIG_ECONET is not set
--# CONFIG_WAN_ROUTER is not set
--
--#
--# QoS and/or fair queueing
--#
--# CONFIG_NET_SCHED is not set
--# CONFIG_NET_CLS_ROUTE is not set
--
--#
--# Network testing
--#
--# CONFIG_NET_PKTGEN is not set
--# CONFIG_NETPOLL is not set
--# CONFIG_NET_POLL_CONTROLLER is not set
--# CONFIG_HAMRADIO is not set
--CONFIG_IRDA=m
--
--#
--# IrDA protocols
--#
--CONFIG_IRLAN=m
--CONFIG_IRNET=m
--CONFIG_IRCOMM=m
--# CONFIG_IRDA_ULTRA is not set
--
--#
--# IrDA options
--#
--# CONFIG_IRDA_CACHE_LAST_LSAP is not set
--# CONFIG_IRDA_FAST_RR is not set
--# CONFIG_IRDA_DEBUG is not set
--
--#
--# Infrared-port device drivers
--#
--
-+# Network device support
- #
--# SIR device drivers
--#
--CONFIG_IRTTY_SIR=m
--
--#
--# Dongle support
--#
--# CONFIG_DONGLE is not set
--
--#
--# Old SIR device drivers
--#
--CONFIG_IRPORT_SIR=m
--
--#
--# Old Serial dongle support
--#
--# CONFIG_DONGLE_OLD is not set
--
--#
--# FIR device drivers
--#
--# CONFIG_NSC_FIR is not set
--# CONFIG_WINBOND_FIR is not set
--# CONFIG_SMC_IRCC_FIR is not set
--# CONFIG_ALI_FIR is not set
--CONFIG_SA1100_FIR=m
--CONFIG_BT=m
--CONFIG_BT_L2CAP=m
--CONFIG_BT_SCO=m
--CONFIG_BT_RFCOMM=m
--CONFIG_BT_RFCOMM_TTY=y
--CONFIG_BT_BNEP=m
--CONFIG_BT_BNEP_MC_FILTER=y
--CONFIG_BT_BNEP_PROTO_FILTER=y
--# CONFIG_BT_HIDP is not set
--
--#
--# Bluetooth device drivers
--#
--# CONFIG_BT_HCIUART is not set
--# CONFIG_BT_HCIDTL1 is not set
--# CONFIG_BT_HCIBT3C is not set
--# CONFIG_BT_HCIBLUECARD is not set
--# CONFIG_BT_HCIBTUART is not set
--# CONFIG_BT_HCIVHCI is not set
- CONFIG_NETDEVICES=y
- CONFIG_DUMMY=y
- # CONFIG_BONDING is not set
-@@ -480,14 +579,19 @@
- # CONFIG_ARCNET is not set
- 
- #
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=m
- # CONFIG_NET_VENDOR_3COM is not set
--# CONFIG_LANCE is not set
- # CONFIG_NET_VENDOR_SMC is not set
- # CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
- # CONFIG_NET_VENDOR_RACAL is not set
- # CONFIG_AT1700 is not set
- # CONFIG_DEPCA is not set
-@@ -497,7 +601,6 @@
- # CONFIG_AC3200 is not set
- # CONFIG_APRICOT is not set
- # CONFIG_CS89x0 is not set
--# CONFIG_NET_POCKET is not set
- 
- #
- # Ethernet (1000 Mbit)
-@@ -516,6 +619,7 @@
- # Wireless LAN (non-hamradio)
- #
- CONFIG_NET_RADIO=y
-+# CONFIG_NET_WIRELESS_RTNETLINK is not set
- 
- #
- # Obsolete Wireless cards support (pre-802.11)
-@@ -542,6 +646,7 @@
- #
- # CONFIG_AIRO_CS is not set
- # CONFIG_PCMCIA_WL3501 is not set
-+# CONFIG_HOSTAP is not set
- CONFIG_NET_WIRELESS=y
- 
- #
-@@ -568,10 +673,14 @@
- CONFIG_PPP_SYNC_TTY=m
- CONFIG_PPP_DEFLATE=m
- CONFIG_PPP_BSDCOMP=m
-+# CONFIG_PPP_MPPE is not set
- CONFIG_PPPOE=m
- # CONFIG_SLIP is not set
-+CONFIG_SLHC=m
- # CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
- 
- #
- # ISDN subsystem
-@@ -582,6 +691,7 @@
- # Input device support
- #
- CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
- 
- #
- # Userland interfaces
-@@ -614,7 +724,6 @@
- # CONFIG_SERIO_LIBPS2 is not set
- # CONFIG_SERIO_RAW is not set
- # CONFIG_GAMEPORT is not set
--CONFIG_SOUND_GAMEPORT=y
- 
- #
- # Character devices
-@@ -622,6 +731,7 @@
- CONFIG_VT=y
- CONFIG_VT_CONSOLE=y
- CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
- 
- #
-@@ -649,20 +759,21 @@
- # Watchdog Cards
- #
- # CONFIG_WATCHDOG is not set
-+CONFIG_HW_RANDOM=y
- # CONFIG_NVRAM is not set
--# CONFIG_RTC is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
- 
- #
- # Ftape, the floppy tape device driver
- #
--# CONFIG_DRM is not set
- 
- #
- # PCMCIA character devices
- #
- # CONFIG_SYNCLINK_CS is not set
-+# CONFIG_CARDMAN_4000 is not set
-+# CONFIG_CARDMAN_4040 is not set
- # CONFIG_RAW_DRIVER is not set
- 
- #
-@@ -676,8 +787,48 @@
- # CONFIG_I2C is not set
- 
- #
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_ABITUGURU is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+# CONFIG_HWMON_DEBUG_CHIP is not set
-+
-+#
- # Misc devices
- #
-+# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multimedia Capabilities Port drivers
-+#
-+# CONFIG_MCP_SA11X0 is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
- 
- #
- # Multimedia devices
-@@ -692,14 +843,18 @@
- #
- # Graphics support
- #
-+CONFIG_FIRMWARE_EDID=y
- CONFIG_FB=y
--# CONFIG_FB_CFB_FILLRECT is not set
--# CONFIG_FB_CFB_COPYAREA is not set
--# CONFIG_FB_CFB_IMAGEBLIT is not set
--# CONFIG_FB_SOFT_CURSOR is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
- # CONFIG_FB_MODE_HELPERS is not set
- # CONFIG_FB_TILEBLITTING is not set
- # CONFIG_FB_SA1100 is not set
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_MQ200=y
- # CONFIG_FB_VIRTUAL is not set
- 
- #
-@@ -709,6 +864,7 @@
- # CONFIG_MDA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
- CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
- # CONFIG_FONTS is not set
- CONFIG_FONT_8x8=y
- CONFIG_FONT_8x16=y
-@@ -742,9 +898,14 @@
- #
- CONFIG_USB_ARCH_HAS_HCD=y
- # CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
- # CONFIG_USB is not set
- 
- #
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
- # USB Gadget Support
- #
- # CONFIG_USB_GADGET is not set
-@@ -755,14 +916,22 @@
- # CONFIG_MMC is not set
- 
- #
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+
-+#
- # File systems
- #
- CONFIG_EXT2_FS=m
- # CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=m
- CONFIG_EXT3_FS_XATTR=y
- # CONFIG_EXT3_FS_POSIX_ACL is not set
- # CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
- CONFIG_JBD=m
- # CONFIG_JBD_DEBUG is not set
- CONFIG_FS_MBCACHE=m
-@@ -771,17 +940,19 @@
- CONFIG_REISERFS_PROC_INFO=y
- # CONFIG_REISERFS_FS_XATTR is not set
- # CONFIG_JFS_FS is not set
--
--#
--# XFS support
--#
-+# CONFIG_FS_POSIX_ACL is not set
- # CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- CONFIG_DNOTIFY=y
- # CONFIG_AUTOFS_FS is not set
- # CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
- 
- #
- # CD-ROM/DVD Filesystems
-@@ -803,14 +974,12 @@
- # Pseudo filesystems
- #
- CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
- CONFIG_SYSFS=y
--CONFIG_DEVFS_FS=y
--CONFIG_DEVFS_MOUNT=y
--# CONFIG_DEVFS_DEBUG is not set
--# CONFIG_DEVPTS_FS_XATTR is not set
- # CONFIG_TMPFS is not set
- # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
- 
- #
- # Miscellaneous filesystems
-@@ -827,8 +996,9 @@
- # CONFIG_JFFS_PROC_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
--# CONFIG_JFFS2_FS_NAND is not set
--# CONFIG_JFFS2_FS_NOR_ECC is not set
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
- CONFIG_JFFS2_ZLIB=y
- CONFIG_JFFS2_RTIME=y
-@@ -845,12 +1015,14 @@
- #
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
- # CONFIG_NFS_V4 is not set
- # CONFIG_NFS_DIRECTIO is not set
- # CONFIG_NFSD is not set
- # CONFIG_ROOT_NFS is not set
- CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
-@@ -860,6 +1032,7 @@
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
- 
- #
- # Partition Types
-@@ -920,19 +1093,32 @@
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
--CONFIG_DEBUG_KERNEL=y
-+CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_KERNEL=y
- CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_DEBUG_SLAB is not set
- CONFIG_DEBUG_PREEMPT=y
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_RWSEMS is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
- # CONFIG_DEBUG_FS is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_HEADERS_CHECK is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
- CONFIG_DEBUG_USER=y
- CONFIG_DEBUG_ERRORS=y
- CONFIG_DEBUG_LL=y
-@@ -950,14 +1136,12 @@
- # CONFIG_CRYPTO is not set
- 
- #
--# Hardware crypto devices
--#
--
--#
- # Library routines
- #
- CONFIG_CRC_CCITT=m
-+# CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-diff -uNr linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig~ linux-2.6.20/arch/arm/configs/simpad_defconfig~
---- linux-2.6.20.vanilla/arch/arm/configs/simpad_defconfig~	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/arch/arm/configs/simpad_defconfig~	2007-02-11 16:35:19.000000000 +0100
-@@ -0,0 +1,963 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.12-rc1-bk2
-+# Mon Mar 28 00:10:36 2005
-+#
-+CONFIG_ARM=y
-+CONFIG_MMU=y
-+CONFIG_UID16=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_IOMAP=y
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_CLEAN_COMPILE=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_LOCK_KERNEL=y
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION="oe1"
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+CONFIG_SYSCTL=y
-+# CONFIG_AUDIT is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_KOBJECT_UEVENT=y
-+# CONFIG_IKCONFIG is not set
-+CONFIG_EMBEDDED=y
-+CONFIG_KALLSYMS=y
-+CONFIG_KALLSYMS_ALL=y
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SHMEM=y
-+CONFIG_CC_ALIGN_FUNCTIONS=0
-+CONFIG_CC_ALIGN_LABELS=0
-+CONFIG_CC_ALIGN_LOOPS=0
-+CONFIG_CC_ALIGN_JUMPS=0
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_UNLOAD is not set
-+CONFIG_OBSOLETE_MODPARM=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_IOP3XX is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+CONFIG_ARCH_SA1100=y
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_OMAP is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_H720X is not set
-+
-+#
-+# SA11x0 Implementations
-+#
-+# CONFIG_SA1100_ASSABET is not set
-+# CONFIG_SA1100_CERF is not set
-+# CONFIG_SA1100_COLLIE is not set
-+# CONFIG_SA1100_H3100 is not set
-+# CONFIG_SA1100_H3600 is not set
-+# CONFIG_SA1100_H3800 is not set
-+# CONFIG_SA1100_BADGE4 is not set
-+# CONFIG_SA1100_JORNADA720 is not set
-+# CONFIG_SA1100_HACKKIT is not set
-+# CONFIG_SA1100_LART is not set
-+# CONFIG_SA1100_PLEB is not set
-+# CONFIG_SA1100_SHANNON is not set
-+CONFIG_SA1100_SIMPAD=y
-+# CONFIG_SA1100_SSP is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_SA1100=y
-+CONFIG_CPU_32v4=y
-+CONFIG_CPU_ABRT_EV4=y
-+CONFIG_CPU_CACHE_V4WB=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_TLB_V4WB=y
-+CONFIG_CPU_MINICACHE=y
-+
-+#
-+# Processor Features
-+#
-+
-+#
-+# Bus support
-+#
-+CONFIG_ISA=y
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+CONFIG_PCCARD=y
-+# CONFIG_PCMCIA_DEBUG is not set
-+CONFIG_PCMCIA=y
-+
-+#
-+# PC-card bridges
-+#
-+# CONFIG_I82365 is not set
-+# CONFIG_TCIC is not set
-+CONFIG_PCMCIA_SA1100=y
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_PREEMPT=y
-+CONFIG_DISCONTIGMEM=y
-+CONFIG_LEDS=y
-+CONFIG_LEDS_TIMER=y
-+# CONFIG_LEDS_CPU is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-+# CONFIG_XIP_KERNEL is not set
-+
-+#
-+# CPU Frequency scaling
-+#
-+# CONFIG_CPU_FREQ is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_MISC=m
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+CONFIG_APM=y
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=m
-+# CONFIG_DEBUG_DRIVER is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+CONFIG_MTD_CFI_ADV_OPTIONS=y
-+CONFIG_MTD_CFI_NOSWAP=y
-+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI_GEOMETRY=y
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+# CONFIG_MTD_CFI_I2 is not set
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+CONFIG_MTD_RAM=y
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_XIP is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PHYSMAP is not set
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+CONFIG_MTD_SA1100=y
-+# CONFIG_MTD_EDB7312 is not set
-+# CONFIG_MTD_IMPA7 is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLKMTD is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+# CONFIG_MTD_NAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNP is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_FD is not set
-+# CONFIG_BLK_DEV_XD is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=m
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+CONFIG_BLK_DEV_RAM=m
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CDROM_PKTCDVD is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# ATA/ATAPI/MFM/RLL support
-+#
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_SCSI is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Networking support
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+CONFIG_PACKET_MMAP=y
-+# CONFIG_NETLINK_DEV is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_IP_TCPDIAG is not set
-+# CONFIG_IP_TCPDIAG_IPV6 is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_NET_DIVERT is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+# CONFIG_NET_CLS_ROUTE is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_HAMRADIO is not set
-+CONFIG_IRDA=m
-+
-+#
-+# IrDA protocols
-+#
-+CONFIG_IRLAN=m
-+CONFIG_IRNET=m
-+CONFIG_IRCOMM=m
-+# CONFIG_IRDA_ULTRA is not set
-+
-+#
-+# IrDA options
-+#
-+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-+# CONFIG_IRDA_FAST_RR is not set
-+# CONFIG_IRDA_DEBUG is not set
-+
-+#
-+# Infrared-port device drivers
-+#
-+
-+#
-+# SIR device drivers
-+#
-+CONFIG_IRTTY_SIR=m
-+
-+#
-+# Dongle support
-+#
-+# CONFIG_DONGLE is not set
-+
-+#
-+# Old SIR device drivers
-+#
-+CONFIG_IRPORT_SIR=m
-+
-+#
-+# Old Serial dongle support
-+#
-+# CONFIG_DONGLE_OLD is not set
-+
-+#
-+# FIR device drivers
-+#
-+# CONFIG_NSC_FIR is not set
-+# CONFIG_WINBOND_FIR is not set
-+# CONFIG_SMC_IRCC_FIR is not set
-+# CONFIG_ALI_FIR is not set
-+CONFIG_SA1100_FIR=m
-+CONFIG_BT=m
-+CONFIG_BT_L2CAP=m
-+CONFIG_BT_SCO=m
-+CONFIG_BT_RFCOMM=m
-+CONFIG_BT_RFCOMM_TTY=y
-+CONFIG_BT_BNEP=m
-+CONFIG_BT_BNEP_MC_FILTER=y
-+CONFIG_BT_BNEP_PROTO_FILTER=y
-+# CONFIG_BT_HIDP is not set
-+
-+#
-+# Bluetooth device drivers
-+#
-+# CONFIG_BT_HCIUART is not set
-+# CONFIG_BT_HCIDTL1 is not set
-+# CONFIG_BT_HCIBT3C is not set
-+# CONFIG_BT_HCIBLUECARD is not set
-+# CONFIG_BT_HCIBTUART is not set
-+# CONFIG_BT_HCIVHCI is not set
-+CONFIG_NETDEVICES=y
-+CONFIG_DUMMY=y
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# ARCnet devices
-+#
-+# CONFIG_ARCNET is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=m
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_LANCE is not set
-+# CONFIG_NET_VENDOR_SMC is not set
-+# CONFIG_SMC91X is not set
-+# CONFIG_NET_VENDOR_RACAL is not set
-+# CONFIG_AT1700 is not set
-+# CONFIG_DEPCA is not set
-+# CONFIG_HP100 is not set
-+# CONFIG_NET_ISA is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_AC3200 is not set
-+# CONFIG_APRICOT is not set
-+# CONFIG_CS89x0 is not set
-+# CONFIG_NET_POCKET is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+CONFIG_NET_RADIO=y
-+
-+#
-+# Obsolete Wireless cards support (pre-802.11)
-+#
-+# CONFIG_STRIP is not set
-+# CONFIG_ARLAN is not set
-+# CONFIG_WAVELAN is not set
-+CONFIG_PCMCIA_WAVELAN=m
-+# CONFIG_PCMCIA_NETWAVE is not set
-+
-+#
-+# Wireless 802.11 Frequency Hopping cards support
-+#
-+# CONFIG_PCMCIA_RAYCS is not set
-+
-+#
-+# Wireless 802.11b ISA/PCI cards support
-+#
-+# CONFIG_HERMES is not set
-+# CONFIG_ATMEL is not set
-+
-+#
-+# Wireless 802.11b Pcmcia/Cardbus cards support
-+#
-+# CONFIG_AIRO_CS is not set
-+# CONFIG_PCMCIA_WL3501 is not set
-+CONFIG_NET_WIRELESS=y
-+
-+#
-+# PCMCIA network device support
-+#
-+CONFIG_NET_PCMCIA=y
-+CONFIG_PCMCIA_3C589=m
-+CONFIG_PCMCIA_3C574=m
-+# CONFIG_PCMCIA_FMVJ18X is not set
-+CONFIG_PCMCIA_PCNET=m
-+# CONFIG_PCMCIA_NMCLAN is not set
-+CONFIG_PCMCIA_SMC91C92=m
-+CONFIG_PCMCIA_XIRC2PS=m
-+# CONFIG_PCMCIA_AXNET is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+CONFIG_PPP=m
-+CONFIG_PPP_MULTILINK=y
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_ASYNC=m
-+CONFIG_PPP_SYNC_TTY=m
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+CONFIG_PPPOE=m
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_TSDEV=y
-+CONFIG_INPUT_TSDEV_SCREEN_X=800
-+CONFIG_INPUT_TSDEV_SCREEN_Y=600
-+CONFIG_INPUT_EVDEV=m
-+CONFIG_INPUT_EVBUG=y
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+CONFIG_SERIO=m
-+CONFIG_SERIO_SERPORT=m
-+# CONFIG_SERIO_LIBPS2 is not set
-+# CONFIG_SERIO_RAW is not set
-+# CONFIG_GAMEPORT is not set
-+CONFIG_SOUND_GAMEPORT=y
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_SA1100=y
-+CONFIG_SERIAL_SA1100_CONSOLE=y
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_RTC is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+
-+#
-+# Ftape, the floppy tape device driver
-+#
-+# CONFIG_DRM is not set
-+
-+#
-+# PCMCIA character devices
-+#
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# Misc devices
-+#
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+
-+#
-+# Graphics support
-+#
-+CONFIG_FB=y
-+# CONFIG_FB_CFB_FILLRECT is not set
-+# CONFIG_FB_CFB_COPYAREA is not set
-+# CONFIG_FB_CFB_IMAGEBLIT is not set
-+# CONFIG_FB_SOFT_CURSOR is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+# CONFIG_FB_SA1100 is not set
-+# CONFIG_FB_VIRTUAL is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+# CONFIG_MDA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FONTS is not set
-+CONFIG_FONT_8x8=y
-+CONFIG_FONT_8x16=y
-+
-+#
-+# Logo configuration
-+#
-+CONFIG_LOGO=y
-+CONFIG_LOGO_LINUX_MONO=y
-+CONFIG_LOGO_LINUX_VGA16=y
-+CONFIG_LOGO_LINUX_CLUT224=y
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=y
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+# CONFIG_SND is not set
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+# CONFIG_USB_ARCH_HAS_OHCI is not set
-+# CONFIG_USB is not set
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+# CONFIG_MMC is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=m
-+# CONFIG_EXT2_FS_XATTR is not set
-+CONFIG_EXT3_FS=m
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+CONFIG_JBD=m
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=m
-+CONFIG_REISERFS_FS=m
-+# CONFIG_REISERFS_CHECK is not set
-+CONFIG_REISERFS_PROC_INFO=y
-+# CONFIG_REISERFS_FS_XATTR is not set
-+# CONFIG_JFS_FS is not set
-+
-+#
-+# XFS support
-+#
-+# CONFIG_XFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=m
-+CONFIG_MSDOS_FS=m
-+CONFIG_VFAT_FS=m
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_SYSFS=y
-+CONFIG_DEVFS_FS=y
-+CONFIG_DEVFS_MOUNT=y
-+# CONFIG_DEVFS_DEBUG is not set
-+# CONFIG_DEVPTS_FS_XATTR is not set
-+# CONFIG_TMPFS is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS_FS=m
-+CONFIG_JFFS_FS_VERBOSE=0
-+# CONFIG_JFFS_PROC_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+# CONFIG_JFFS2_FS_NAND is not set
-+# CONFIG_JFFS2_FS_NOR_ECC is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=m
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+# CONFIG_ROOT_NFS is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+CONFIG_NLS_ISO8859_15=y
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+CONFIG_DEBUG_PREEMPT=y
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_FS is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_DEBUG_USER=y
-+CONFIG_DEBUG_ERRORS=y
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+
-+#
-+# Library routines
-+#
-+CONFIG_CRC_CCITT=m
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
 diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig linux-2.6.20/drivers/video/Kconfig
 --- linux-2.6.20.vanilla/drivers/video/Kconfig	2007-02-10 19:02:14.000000000 +0100
 +++ linux-2.6.20/drivers/video/Kconfig	2007-02-11 16:39:54.000000000 +0100
@@ -1960,1672 +20,6 @@ diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig linux-2.6.20/drivers/video/
  config FB_SAVAGE
  	tristate "S3 Savage support"
  	depends on FB && PCI && EXPERIMENTAL
-diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig~ linux-2.6.20/drivers/video/Kconfig~
---- linux-2.6.20.vanilla/drivers/video/Kconfig~	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/video/Kconfig~	2007-02-11 16:36:10.000000000 +0100
-@@ -0,0 +1,1662 @@
-+#
-+# Video configuration
-+#
-+
-+menu "Graphics support"
-+
-+config FIRMWARE_EDID
-+       bool "Enable firmware EDID"
-+       default y
-+       ---help---
-+         This enables access to the EDID transferred from the firmware.
-+	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
-+	 transfers do not work for your driver and if you are using
-+	 nvidiafb, i810fb or savagefb.
-+
-+	 In general, choosing Y for this option is safe.  If you
-+	 experience extremely long delays while booting before you get
-+	 something on your display, try setting this to N.  Matrox cards in
-+	 combination with certain motherboards and monitors are known to
-+	 suffer from this problem.
-+
-+config FB
-+	tristate "Support for frame buffer devices"
-+	---help---
-+	  The frame buffer device provides an abstraction for the graphics
-+	  hardware. It represents the frame buffer of some video hardware and
-+	  allows application software to access the graphics hardware through
-+	  a well-defined interface, so the software doesn't need to know
-+	  anything about the low-level (hardware register) stuff.
-+
-+	  Frame buffer devices work identically across the different
-+	  architectures supported by Linux and make the implementation of
-+	  application programs easier and more portable; at this point, an X
-+	  server exists which uses the frame buffer device exclusively.
-+	  On several non-X86 architectures, the frame buffer device is the
-+	  only way to use the graphics hardware.
-+
-+	  The device is accessed through special device nodes, usually located
-+	  in the /dev directory, i.e. /dev/fb*.
-+
-+	  You need an utility program called fbset to make full use of frame
-+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+	  and the Framebuffer-HOWTO at
-+	  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-+	  information.
-+
-+	  Say Y here and to the driver for your graphics board below if you
-+	  are compiling a kernel for a non-x86 architecture.
-+
-+	  If you are compiling for the x86 architecture, you can say Y if you
-+	  want to play with it, but it is not essential. Please note that
-+	  running graphical applications that directly touch the hardware
-+	  (e.g. an accelerated X server) and that are not frame buffer
-+	  device-aware may cause unexpected results. If unsure, say N.
-+
-+config FB_DDC
-+       tristate
-+       depends on FB && I2C && I2C_ALGOBIT
-+       default n
-+
-+config FB_CFB_FILLRECT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_fillrect function for generic software rectangle
-+	  filling. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+
-+config FB_CFB_COPYAREA
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_copyarea function for generic software area copying.
-+	  This is used by drivers that don't provide their own (accelerated)
-+	  version.
-+
-+config FB_CFB_IMAGEBLIT
-+	tristate
-+	depends on FB
-+	default n
-+	---help---
-+	  Include the cfb_imageblit function for generic software image
-+	  blitting. This is used by drivers that don't provide their own
-+	  (accelerated) version.
-+
-+config FB_MACMODES
-+       tristate
-+       depends on FB
-+       default n
-+
-+config FB_BACKLIGHT
-+	bool
-+	depends on FB
-+	select BACKLIGHT_LCD_SUPPORT
-+	select BACKLIGHT_CLASS_DEVICE
-+	default n
-+
-+config FB_MODE_HELPERS
-+        bool "Enable Video Mode Handling Helpers"
-+        depends on FB
-+	default n
-+	---help---
-+	  This enables functions for handling video modes using the
-+	  Generalized Timing Formula and the EDID parser. A few drivers rely
-+          on this feature such as the radeonfb, rivafb, and the i810fb. If
-+	  your driver does not take advantage of this feature, choosing Y will
-+	  just increase the kernel size by about 5K.
-+
-+config FB_TILEBLITTING
-+       bool "Enable Tile Blitting Support"
-+       depends on FB
-+       default n
-+       ---help---
-+         This enables tile blitting.  Tile blitting is a drawing technique
-+	 where the screen is divided into rectangular sections (tiles), whereas
-+	 the standard blitting divides the screen into pixels. Because the
-+	 default drawing element is a tile, drawing functions will be passed
-+	 parameters in terms of number of tiles instead of number of pixels.
-+	 For example, to draw a single character, instead of using bitmaps,
-+	 an index to an array of bitmaps will be used.  To clear or move a
-+	 rectangular section of a screen, the rectangle will be described in
-+	 terms of number of tiles in the x- and y-axis.
-+
-+	 This is particularly important to one driver, matroxfb.  If
-+	 unsure, say N.
-+
-+config FB_CIRRUS
-+	tristate "Cirrus Logic support"
-+	depends on FB && (ZORRO || PCI)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  This enables support for Cirrus Logic GD542x/543x based boards on
-+	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
-+
-+	  If you have a PCI-based system, this enables support for these
-+	  chips: GD-543x, GD-544x, GD-5480.
-+
-+	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
-+
-+	  Say N unless you have such a graphics board or plan to get one
-+	  before you next recompile the kernel.
-+
-+config FB_PM2
-+	tristate "Permedia2 support"
-+	depends on FB && ((AMIGA && BROKEN) || PCI)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Permedia2 AGP frame
-+	  buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
-+	  product page at
-+	  <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
-+
-+config FB_PM2_FIFO_DISCONNECT
-+	bool "enable FIFO disconnect feature"
-+	depends on FB_PM2 && PCI
-+	help
-+	  Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
-+
-+config FB_ARMCLCD
-+	tristate "ARM PrimeCell PL110 support"
-+	depends on FB && ARM && ARM_AMBA
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This framebuffer device driver is for the ARM PrimeCell PL110
-+	  Colour LCD controller.  ARM PrimeCells provide the building
-+	  blocks for System on a Chip devices.
-+
-+	  If you want to compile this as a module (=code which can be
-+	  inserted into and removed from the running kernel), say M
-+	  here and read <file:Documentation/modules.txt>.  The module
-+	  will be called amba-clcd.
-+
-+choice
-+
-+	depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
-+	prompt "LCD Panel"
-+	default FB_ARMCLCD_SHARP_LQ035Q7DB02
-+
-+config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
-+	bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
-+	help
-+	  This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
-+	  color QVGA, HRTFT panel.  The LogicPD device includes
-+	  an integrated HRTFT controller IC.
-+	  The native resolution is 240x320.
-+
-+config FB_ARMCLCD_SHARP_LQ057Q3DC02
-+	bool "LogicPD LCD 5.7\" QVGA"
-+	help
-+	  This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
-+	  color QVGA, TFT panel.  The LogicPD device includes an
-+	  The native resolution is 320x240.
-+
-+config FB_ARMCLCD_SHARP_LQ64D343
-+	bool "LogicPD LCD 6.4\" VGA"
-+	help
-+	  This is an implementation of the Sharp LQ64D343, a 6.4"
-+	  color VGA, TFT panel.  The LogicPD device includes an
-+	  The native resolution is 640x480.
-+
-+config FB_ARMCLCD_SHARP_LQ10D368
-+	bool "LogicPD LCD 10.4\" VGA"
-+	help
-+	  This is an implementation of the Sharp LQ10D368, a 10.4"
-+	  color VGA, TFT panel.  The LogicPD device includes an
-+	  The native resolution is 640x480.
-+
-+
-+config FB_ARMCLCD_SHARP_LQ121S1DG41
-+	bool "LogicPD LCD 12.1\" SVGA"
-+	help
-+	  This is an implementation of the Sharp LQ121S1DG41, a 12.1"
-+	  color SVGA, TFT panel.  The LogicPD device includes an
-+	  The native resolution is 800x600.
-+
-+	  This panel requires a clock rate may be an integer fraction
-+	  of the base LCDCLK frequency.  The driver will select the
-+	  highest frequency available that is lower than the maximum
-+	  allowed.  The panel may flicker if the clock rate is
-+	  slower than the recommended minimum.
-+
-+config FB_ARMCLCD_AUO_A070VW01_WIDE
-+	bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
-+	help
-+	  This is an implementation of the AU Optronics, a 7.0"
-+	  WIDE Color.  The native resolution is 234x480.
-+
-+config FB_ARMCLCD_HITACHI
-+	bool "Hitachi Wide Screen 800x480"
-+	help
-+	  This is an implementation of the Hitachi 800x480.
-+
-+endchoice
-+
-+
-+config FB_ACORN
-+	bool "Acorn VIDC support"
-+	depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Acorn VIDC graphics
-+	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
-+	  unsure, say N.
-+
-+config FB_CLPS711X
-+	bool "CLPS711X LCD support"
-+	depends on (FB = y) && ARM && ARCH_CLPS711X
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  Say Y to enable the Framebuffer driver for the CLPS7111 and
-+	  EP7212 processors.
-+
-+config FB_SA1100
-+	bool "SA-1100 LCD support"
-+	depends on (FB = y) && ARM && ARCH_SA1100
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is a framebuffer device for the SA-1100 LCD Controller.
-+	  See <http://www.linux-fbdev.org/> for information on framebuffer
-+	  devices.
-+
-+	  If you plan to use the LCD display with your SA-1100 system, say
-+	  Y here.
-+
-+config FB_IMX
-+	tristate "Motorola i.MX LCD support"
-+	depends on FB && ARM && ARCH_IMX
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+
-+config FB_CYBER2000
-+	tristate "CyberPro 2000/2010/5000 support"
-+	depends on FB && PCI && (BROKEN || !SPARC64)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This enables support for the Integraphics CyberPro 20x0 and 5000
-+	  VGA chips used in the Rebel.com Netwinder and other machines.
-+	  Say Y if you have a NetWinder or a graphics card containing this
-+	  device, otherwise say N.
-+
-+config FB_APOLLO
-+	bool
-+	depends on (FB = y) && APOLLO
-+	default y
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_IMAGEBLIT
-+
-+config FB_Q40
-+	bool
-+	depends on (FB = y) && Q40
-+	default y
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+
-+config FB_AMIGA
-+	tristate "Amiga native chipset support"
-+	depends on FB && AMIGA
-+	help
-+	  This is the frame buffer device driver for the builtin graphics
-+	  chipset found in Amigas.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called amifb.
-+
-+config FB_AMIGA_OCS
-+	bool "Amiga OCS chipset support"
-+	depends on FB_AMIGA
-+	help
-+	  This enables support for the original Agnus and Denise video chips,
-+	  found in the Amiga 1000 and most A500's and A2000's. If you intend
-+	  to run Linux on any of these systems, say Y; otherwise say N.
-+
-+config FB_AMIGA_ECS
-+	bool "Amiga ECS chipset support"
-+	depends on FB_AMIGA
-+	help
-+	  This enables support for the Enhanced Chip Set, found in later
-+	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
-+	  you intend to run Linux on any of these systems, say Y; otherwise
-+	  say N.
-+
-+config FB_AMIGA_AGA
-+	bool "Amiga AGA chipset support"
-+	depends on FB_AMIGA
-+	help
-+	  This enables support for the Advanced Graphics Architecture (also
-+	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
-+	  and CD32. If you intend to run Linux on any of these systems, say Y;
-+	  otherwise say N.
-+
-+config FB_CYBER
-+	tristate "Amiga CyberVision 64 support"
-+	depends on FB && ZORRO && BROKEN
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This enables support for the Cybervision 64 graphics card from
-+	  Phase5. Please note that its use is not all that intuitive (i.e. if
-+	  you have any questions, be sure to ask!). Say N unless you have a
-+	  Cybervision 64 or plan to get one before you next recompile the
-+	  kernel. Please note that this driver DOES NOT support the
-+	  Cybervision 64/3D card, as they use incompatible video chips.
-+
-+config FB_VIRGE
-+	bool "Amiga CyberVision 64/3D support "
-+	depends on (FB = y) && ZORRO && BROKEN
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This enables support for the Cybervision 64/3D graphics card from
-+	  Phase5. Please note that its use is not all that intuitive (i.e. if
-+	  you have any questions, be sure to ask!). Say N unless you have a
-+	  Cybervision 64/3D or plan to get one before you next recompile the
-+	  kernel. Please note that this driver DOES NOT support the older
-+	  Cybervision 64 card, as they use incompatible video chips.
-+
-+config FB_RETINAZ3
-+	tristate "Amiga Retina Z3 support"
-+	depends on (FB = y) && ZORRO && BROKEN
-+	help
-+	  This enables support for the Retina Z3 graphics card. Say N unless
-+	  you have a Retina Z3 or plan to get one before you next recompile
-+	  the kernel.
-+
-+config FB_FM2
-+	bool "Amiga FrameMaster II/Rainbow II support"
-+	depends on (FB = y) && ZORRO
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Amiga FrameMaster
-+	  card from BSC (exhibited 1992 but not shipped as a CBM product).
-+
-+config FB_ARC
-+	tristate "Arc Monochrome LCD board support"
-+	depends on FB && X86
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This enables support for the Arc Monochrome LCD board. The board
-+	  is based on the KS-108 lcd controller and is typically a matrix
-+	  of 2*n chips. This driver was tested with a 128x64 panel. This
-+	  driver supports it for use with x86 SBCs through a 16 bit GPIO
-+	  interface (8 bit data, 8 bit control). If you anticipate using
-+	  this driver, say Y or M; otherwise say N. You must specify the
-+	  GPIO IO address to be used for setting control and data.
-+
-+config FB_ATARI
-+	bool "Atari native chipset support"
-+	depends on (FB = y) && ATARI && BROKEN
-+	help
-+	  This is the frame buffer device driver for the builtin graphics
-+	  chipset found in Ataris.
-+
-+config FB_OF
-+	bool "Open Firmware frame buffer device support"
-+	depends on (FB = y) && (PPC64 || PPC_OF)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES
-+	help
-+	  Say Y if you want support with Open Firmware for your graphics
-+	  board.
-+
-+config FB_CONTROL
-+	bool "Apple \"control\" display support"
-+	depends on (FB = y) && PPC_PMAC && PPC32
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES
-+	help
-+	  This driver supports a frame buffer for the graphics adapter in the
-+	  Power Macintosh 7300 and others.
-+
-+config FB_PLATINUM
-+	bool "Apple \"platinum\" display support"
-+	depends on (FB = y) && PPC_PMAC && PPC32
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES
-+	help
-+	  This driver supports a frame buffer for the "platinum" graphics
-+	  adapter in some Power Macintoshes.
-+
-+config FB_VALKYRIE
-+	bool "Apple \"valkyrie\" display support"
-+	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES
-+	help
-+	  This driver supports a frame buffer for the "valkyrie" graphics
-+	  adapter in some Power Macintoshes.
-+
-+config FB_CT65550
-+	bool "Chips 65550 display support"
-+	depends on (FB = y) && PPC32
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Chips & Technologies
-+	  65550 graphics chip in PowerBooks.
-+
-+config FB_ASILIANT
-+	bool "Asiliant (Chips) 69000 display support"
-+	depends on (FB = y) && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Asiliant 69030 chipset
-+
-+config FB_IMSTT
-+	bool "IMS Twin Turbo display support"
-+	depends on (FB = y) && PCI
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES if PPC
-+	help
-+	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
-+	  many Macintosh and compatible computers.
-+
-+config FB_VGA16
-+	tristate "VGA 16-color graphics support"
-+	depends on FB && (X86 || PPC)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for VGA 16 color graphic
-+	  cards. Say Y if you have such a card.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called vga16fb.
-+
-+config FB_STI
-+	tristate "HP STI frame buffer device support"
-+	depends on FB && PARISC
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	default y
-+	---help---
-+	  STI refers to the HP "Standard Text Interface" which is a set of
-+	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-+	  Enabling this option will implement the linux framebuffer device
-+	  using calls to the STI BIOS routines for initialisation.
-+	
-+	  If you enable this option, you will get a planar framebuffer device
-+	  /dev/fb which will work on the most common HP graphic cards of the
-+	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
-+	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
-+
-+	  It is safe to enable this option, so you should probably say "Y".
-+
-+config FB_MAC
-+	bool "Generic Macintosh display support"
-+	depends on (FB = y) && MAC
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES
-+
-+#      bool '  Apple DAFB display support' CONFIG_FB_DAFB
-+config FB_HP300
-+	bool
-+	depends on (FB = y) && HP300
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_IMAGEBLIT
-+	default y
-+
-+config FB_TGA
-+	tristate "TGA framebuffer support"
-+	depends on FB && ALPHA
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select BITREVERSE
-+	help
-+	  This is the frame buffer device driver for generic TGA graphic
-+	  cards. Say Y if you have one of those.
-+
-+config FB_VESA
-+	bool "VESA VGA graphics support"
-+	depends on (FB = y) && X86
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select VIDEO_SELECT
-+	help
-+	  This is the frame buffer device driver for generic VESA 2.0
-+	  compliant graphic cards. The older VESA 1.2 cards are not supported.
-+	  You will get a boot time penguin logo at no additional cost. Please
-+	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-+
-+config FB_IMAC
-+	bool "Intel-based Macintosh Framebuffer Support"
-+	depends on (FB = y) && X86 && EFI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Intel-based Macintosh
-+
-+config FB_HGA
-+	tristate "Hercules mono graphics support"
-+	depends on FB && X86
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  Say Y here if you have a Hercules mono graphics card.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called hgafb.
-+
-+	  As this card technology is 15 years old, most people will answer N
-+	  here.
-+
-+config FB_HGA_ACCEL
-+	bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
-+	depends on FB_HGA && EXPERIMENTAL
-+	---help---
-+	This will compile the Hercules mono graphics with
-+	acceleration functions.
-+
-+config FB_SGIVW
-+	tristate "SGI Visual Workstation framebuffer support"
-+	depends on FB && X86_VISWS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  SGI Visual Workstation support for framebuffer graphics.
-+
-+config FB_GBE
-+	bool "SGI Graphics Backend frame buffer support"
-+	depends on (FB = y) && (SGI_IP32 || X86_VISWS)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+ 	help
-+	  This is the frame buffer device driver for SGI Graphics Backend.
-+	  This chip is used in SGI O2 and Visual Workstation 320/540.
-+
-+config FB_GBE_MEM
-+	int "Video memory size in MB"
-+	depends on FB_GBE
-+	default 4
-+	help
-+	  This is the amount of memory reserved for the framebuffer,
-+	  which can be any value between 1MB and 8MB.
-+
-+config FB_SUN3
-+	bool "Sun3 framebuffer support"
-+	depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
-+
-+config FB_SBUS
-+	bool "SBUS and UPA framebuffers"
-+	depends on (FB = y) && SPARC
-+	help
-+	  Say Y if you want support for SBUS or UPA based frame buffer device.
-+
-+config FB_BW2
-+	bool "BWtwo support"
-+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the BWtwo frame buffer.
-+
-+config FB_CG3
-+	bool "CGthree support"
-+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the CGthree frame buffer.
-+
-+config FB_CG6
-+	bool "CGsix (GX,TurboGX) support"
-+	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
-+	  frame buffer.
-+
-+config FB_PVR2
-+	tristate "NEC PowerVR 2 display support"
-+	depends on FB && SH_DREAMCAST
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
-+	  run linux on your Dreamcast, you will have to say Y here.
-+	  This driver may or may not work on other PowerVR 2 cards, but is
-+	  totally untested.  Use at your own risk.  If unsure, say N.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called pvr2fb.
-+
-+	  You can pass several parameters to the driver at boot time or at
-+	  module load time.  The parameters look like "video=pvr2:XXX", where
-+	  the meaning of XXX can be found at the end of the main source file
-+	  (<file:drivers/video/pvr2fb.c>). Please see the file
-+	  <file:Documentation/fb/pvr2fb.txt>.
-+
-+config FB_EPSON1355
-+	bool "Epson 1355 framebuffer support"
-+	depends on (FB = y) && (SUPERH || ARCH_CEIVA)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  Build in support for the SED1355 Epson Research Embedded RAMDAC
-+	  LCD/CRT Controller (since redesignated as the S1D13505) as a
-+	  framebuffer.  Product specs at
-+	  <http://www.erd.epson.com/vdc/html/products.htm>.
-+
-+config FB_S1D13XXX
-+	tristate "Epson S1D13XXX framebuffer support"
-+	depends on FB
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  Support for S1D13XXX framebuffer device family (currently only
-+	  working with S1D13806). Product specs at
-+	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
-+
-+config FB_NVIDIA
-+	tristate "nVidia Framebuffer Support"
-+	depends on FB && PCI
-+	select I2C_ALGOBIT if FB_NVIDIA_I2C
-+	select I2C if FB_NVIDIA_I2C
-+	select FB_MODE_HELPERS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select BITREVERSE
-+	help
-+	  This driver supports graphics boards with the nVidia chips, TNT
-+	  and newer. For very old chipsets, such as the RIVA128, then use
-+	  the rivafb.
-+	  Say Y if you have such a graphics board.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called nvidiafb.
-+
-+config FB_NVIDIA_I2C
-+       bool "Enable DDC Support"
-+       depends on FB_NVIDIA
-+       help
-+	  This enables I2C support for nVidia Chipsets.  This is used
-+	  only for getting EDID information from the attached display
-+	  allowing for robust video mode handling and switching.
-+
-+	  Because fbdev-2.6 requires that drivers must be able to
-+	  independently validate video mode parameters, you should say Y
-+	  here.
-+
-+config FB_NVIDIA_BACKLIGHT
-+	bool "Support for backlight control"
-+	depends on FB_NVIDIA && PMAC_BACKLIGHT
-+	select FB_BACKLIGHT
-+	default y
-+	help
-+	  Say Y here if you want to control the backlight of your display.
-+
-+config FB_RIVA
-+	tristate "nVidia Riva support"
-+	depends on FB && PCI
-+	select I2C_ALGOBIT if FB_RIVA_I2C
-+	select I2C if FB_RIVA_I2C
-+	select FB_DDC if FB_RIVA_I2C
-+	select FB_MODE_HELPERS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select BITREVERSE
-+	help
-+	  This driver supports graphics boards with the nVidia Riva/Geforce
-+	  chips.
-+	  Say Y if you have such a graphics board.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called rivafb.
-+
-+config FB_RIVA_I2C
-+       bool "Enable DDC Support"
-+       depends on FB_RIVA
-+       help
-+	  This enables I2C support for nVidia Chipsets.  This is used
-+	  only for getting EDID information from the attached display
-+	  allowing for robust video mode handling and switching.
-+
-+	  Because fbdev-2.6 requires that drivers must be able to
-+	  independently validate video mode parameters, you should say Y
-+	  here.
-+
-+config FB_RIVA_DEBUG
-+	bool "Lots of debug output from Riva(nVidia) driver"
-+	depends on FB_RIVA
-+	default n
-+	help
-+	  Say Y here if you want the Riva driver to output all sorts
-+	  of debugging information to provide to the maintainer when
-+	  something goes wrong.
-+
-+config FB_RIVA_BACKLIGHT
-+	bool "Support for backlight control"
-+	depends on FB_RIVA && PMAC_BACKLIGHT
-+	select FB_BACKLIGHT
-+	default y
-+	help
-+	  Say Y here if you want to control the backlight of your display.
-+
-+config FB_I810
-+	tristate "Intel 810/815 support (EXPERIMENTAL)"
-+	depends on FB && EXPERIMENTAL && PCI && X86_32
-+	select AGP
-+	select AGP_INTEL
-+	select FB_MODE_HELPERS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This driver supports the on-board graphics built in to the Intel 810 
-+          and 815 chipsets.  Say Y if you have and plan to use such a board.
-+
-+          To compile this driver as a module, choose M here: the
-+	  module will be called i810fb.
-+
-+          For more information, please read 
-+	  <file:Documentation/fb/intel810.txt>
-+
-+config FB_I810_GTF
-+	bool "use VESA Generalized Timing Formula"
-+	depends on FB_I810
-+	help
-+	  If you say Y, then the VESA standard, Generalized Timing Formula 
-+          or GTF, will be used to calculate the required video timing values
-+	  per video mode.  Since the GTF allows nondiscrete timings 
-+          (nondiscrete being a range of values as opposed to discrete being a
-+          set of values), you'll be able to use any combination of horizontal 
-+	  and vertical resolutions, and vertical refresh rates without having
-+	  to specify your own timing parameters.  This is especially useful
-+	  to maximize the performance of an aging display, or if you just 
-+          have a display with nonstandard dimensions. A VESA compliant 
-+	  monitor is recommended, but can still work with non-compliant ones.
-+	  If you need or want this, then select this option. The timings may 
-+	  not be compliant with Intel's recommended values. Use at your own 
-+	  risk.
-+
-+          If you say N, the driver will revert to discrete video timings 
-+	  using a set recommended by Intel in their documentation.
-+  
-+          If unsure, say N.
-+
-+config FB_I810_I2C
-+	bool "Enable DDC Support"
-+	depends on FB_I810 && FB_I810_GTF
-+	select I2C
-+	select I2C_ALGOBIT
-+	select FB_DDC
-+	help
-+
-+config FB_INTEL
-+	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
-+	depends on FB && EXPERIMENTAL && PCI && X86
-+	select AGP
-+	select AGP_INTEL
-+	select I2C_ALGOBIT if FB_INTEL_I2C
-+	select I2C if FB_INTEL_I2C
-+	select FB_MODE_HELPERS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This driver supports the on-board graphics built in to the Intel
-+          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
-+          Say Y if you have and plan to use such a board.
-+
-+	  If you say Y here and want DDC/I2C support you must first say Y to
-+	  "I2C support" and "I2C bit-banging support" in the character devices
-+	  section.
-+
-+	  If you say M here then "I2C support" and "I2C bit-banging support"
-+	  can be build either as modules or built-in.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called intelfb.
-+
-+	  For more information, please read <file:Documentation/fb/intelfb.txt>
-+
-+config FB_INTEL_DEBUG
-+	bool "Intel driver Debug Messages"
-+	depends on FB_INTEL
-+	---help---
-+	  Say Y here if you want the Intel driver to output all sorts
-+	  of debugging information to provide to the maintainer when
-+	  something goes wrong.
-+
-+config FB_INTEL_I2C
-+	bool "DDC/I2C for Intel framebuffer support"
-+	depends on FB_INTEL
-+	default y
-+	help
-+	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
-+
-+config FB_MATROX
-+	tristate "Matrox acceleration"
-+	depends on FB && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_TILEBLITTING
-+	select FB_MACMODES if PPC_PMAC
-+	---help---
-+	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
-+	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
-+	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
-+	  Matrox G400, G450 or G550 card in your box.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called matroxfb.
-+
-+	  You can pass several parameters to the driver at boot time or at
-+	  module load time. The parameters look like "video=matrox:XXX", and
-+	  are described in <file:Documentation/fb/matroxfb.txt>.
-+
-+config FB_MATROX_MILLENIUM
-+	bool "Millennium I/II support"
-+	depends on FB_MATROX
-+	help
-+	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
-+	  video card. If you select "Advanced lowlevel driver options" below,
-+	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
-+	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
-+	  also use font widths different from 8.
-+
-+config FB_MATROX_MYSTIQUE
-+	bool "Mystique support"
-+	depends on FB_MATROX
-+	help
-+	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
-+	  video card. If you select "Advanced lowlevel driver options" below,
-+	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
-+	  packed pixel and 32 bpp packed pixel. You can also use font widths
-+	  different from 8.
-+
-+config FB_MATROX_G
-+	bool "G100/G200/G400/G450/G550 support"
-+	depends on FB_MATROX
-+	---help---
-+	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
-+	  video card. If you select "Advanced lowlevel driver options", you
-+	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
-+	  pixel and 32 bpp packed pixel. You can also use font widths
-+	  different from 8.
-+
-+	  If you need support for G400 secondary head, you must first say Y to
-+	  "I2C support" in the character devices section, and then to
-+	  "Matrox I2C support" and "G400 second head support" here in the
-+	  framebuffer section. G450/G550 secondary head and digital output
-+	  are supported without additional modules.
-+
-+	  The driver starts in monitor mode. You must use the matroxset tool 
-+	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
-+	  swap primary and secondary head outputs, or to change output mode.  
-+	  Secondary head driver always start in 640x480 resolution and you 
-+	  must use fbset to change it.
-+
-+	  Do not forget that second head supports only 16 and 32 bpp
-+	  packed pixels, so it is a good idea to compile them into the kernel
-+	  too. You can use only some font widths, as the driver uses generic
-+	  painting procedures (the secondary head does not use acceleration
-+	  engine).
-+
-+	  G450/G550 hardware can display TV picture only from secondary CRTC,
-+	  and it performs no scaling, so picture must have 525 or 625 lines.
-+
-+config FB_MATROX_I2C
-+	tristate "Matrox I2C support"
-+	depends on FB_MATROX && I2C
-+	select I2C_ALGOBIT
-+	---help---
-+	  This drivers creates I2C buses which are needed for accessing the
-+	  DDC (I2C) bus present on all Matroxes, an I2C bus which
-+	  interconnects Matrox optional devices, like MGA-TVO on G200 and
-+	  G400, and the secondary head DDC bus, present on G400 only.
-+
-+	  You can say Y or M here if you want to experiment with monitor
-+	  detection code. You must say Y or M here if you want to use either
-+	  second head of G400 or MGA-TVO on G200 or G400.
-+
-+	  If you compile it as module, it will create a module named
-+	  i2c-matroxfb.
-+
-+config FB_MATROX_MAVEN
-+	tristate "G400 second head support"
-+	depends on FB_MATROX_G && FB_MATROX_I2C
-+	---help---
-+	  WARNING !!! This support does not work with G450 !!!
-+
-+	  Say Y or M here if you want to use a secondary head (meaning two
-+	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
-+	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
-+	  secondary head output is blanked while you are in X. With XFree
-+	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
-+	  the fbdev driver on first head and the fbdev driver on second head.
-+
-+	  If you compile it as module, two modules are created,
-+	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
-+	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
-+	  also load i2c-matroxfb to get it to run.
-+
-+	  The driver starts in monitor mode and you must use the matroxset
-+	  tool (available at
-+	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
-+	  PAL or NTSC or to swap primary and secondary head outputs.
-+	  Secondary head driver also always start in 640x480 resolution, you
-+	  must use fbset to change it.
-+
-+	  Also do not forget that second head supports only 16 and 32 bpp
-+	  packed pixels, so it is a good idea to compile them into the kernel
-+	  too.  You can use only some font widths, as the driver uses generic
-+	  painting procedures (the secondary head does not use acceleration
-+	  engine).
-+
-+config FB_MATROX_MULTIHEAD
-+	bool "Multihead support"
-+	depends on FB_MATROX
-+	---help---
-+	  Say Y here if you have more than one (supported) Matrox device in
-+	  your computer and you want to use all of them for different monitors
-+	  ("multihead"). If you have only one device, you should say N because
-+	  the driver compiled with Y is larger and a bit slower, especially on
-+	  ia32 (ix86).
-+
-+	  If you said M to "Matrox unified accelerated driver" and N here, you
-+	  will still be able to use several Matrox devices simultaneously:
-+	  insert several instances of the module matroxfb into the kernel
-+	  with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
-+	  for the different Matrox devices. This method is slightly faster but
-+	  uses 40 KB of kernel memory per Matrox card.
-+
-+	  There is no need for enabling 'Matrox multihead support' if you have
-+	  only one Matrox card in the box.
-+
-+config FB_RADEON
-+	tristate "ATI Radeon display support"
-+	depends on FB && PCI
-+	select I2C_ALGOBIT if FB_RADEON_I2C
-+	select I2C if FB_RADEON_I2C
-+	select FB_DDC if FB_RADEON_I2C
-+	select FB_MODE_HELPERS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES if PPC_OF
-+	help
-+	  Choose this option if you want to use an ATI Radeon graphics card as
-+	  a framebuffer device.  There are both PCI and AGP versions.  You
-+	  don't need to choose this to run the Radeon in plain VGA mode.
-+
-+	  If you say Y here and want DDC/I2C support you must first say Y to
-+	  "I2C support" and "I2C bit-banging support" in the character devices
-+	  section.
-+
-+	  If you say M here then "I2C support" and "I2C bit-banging support" 
-+	  can be build either as modules or built-in.
-+
-+	  There is a product page at
-+	  http://apps.ati.com/ATIcompare/
-+
-+config FB_RADEON_I2C
-+	bool "DDC/I2C for ATI Radeon support"
-+	depends on FB_RADEON
-+	default y
-+	help
-+	  Say Y here if you want DDC/I2C support for your Radeon board. 
-+
-+config FB_RADEON_BACKLIGHT
-+	bool "Support for backlight control"
-+	depends on FB_RADEON && PMAC_BACKLIGHT
-+	select FB_BACKLIGHT
-+	default y
-+	help
-+	  Say Y here if you want to control the backlight of your display.
-+
-+config FB_RADEON_DEBUG
-+	bool "Lots of debug output from Radeon driver"
-+	depends on FB_RADEON
-+	default n
-+	help
-+	  Say Y here if you want the Radeon driver to output all sorts
-+	  of debugging information to provide to the maintainer when
-+	  something goes wrong.
-+
-+config FB_ATY128
-+	tristate "ATI Rage128 display support"
-+	depends on FB && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES if PPC_PMAC
-+	help
-+	  This driver supports graphics boards with the ATI Rage128 chips.
-+	  Say Y if you have such a graphics board and read
-+	  <file:Documentation/fb/aty128fb.txt>.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called aty128fb.
-+
-+config FB_ATY128_BACKLIGHT
-+	bool "Support for backlight control"
-+	depends on FB_ATY128 && PMAC_BACKLIGHT
-+	select FB_BACKLIGHT
-+	default y
-+	help
-+	  Say Y here if you want to control the backlight of your display.
-+
-+config FB_ATY
-+	tristate "ATI Mach64 display support" if PCI || ATARI
-+	depends on FB && !SPARC32
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	select FB_MACMODES if PPC
-+	help
-+	  This driver supports graphics boards with the ATI Mach64 chips.
-+	  Say Y if you have such a graphics board.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called atyfb.
-+
-+config FB_ATY_CT
-+	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
-+	depends on PCI && FB_ATY
-+	default y if SPARC64 && FB_PCI
-+	help
-+	  Say Y here to support use of ATI's 64-bit Rage boards (or other
-+	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
-+	  framebuffer device.  The ATI product support page for these boards
-+	  is at <http://support.ati.com/products/pc/mach64/>.
-+
-+config FB_ATY_GENERIC_LCD
-+	bool "Mach64 generic LCD support (EXPERIMENTAL)"
-+	depends on FB_ATY_CT
-+	help
-+	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
-+	  Rage XC, or Rage XL chipset.
-+
-+config FB_ATY_GX
-+	bool "Mach64 GX support" if PCI
-+	depends on FB_ATY
-+	default y if ATARI
-+	help
-+	  Say Y here to support use of the ATI Mach64 Graphics Expression
-+	  board (or other boards based on the Mach64 GX chipset) as a
-+	  framebuffer device.  The ATI product support page for these boards
-+	  is at
-+	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-+
-+config FB_ATY_BACKLIGHT
-+	bool "Support for backlight control"
-+	depends on FB_ATY && PMAC_BACKLIGHT
-+	select FB_BACKLIGHT
-+	default y
-+	help
-+	  Say Y here if you want to control the backlight of your display.
-+
-+config FB_S3TRIO
-+	bool "S3 Trio display support"
-+	depends on (FB = y) && PPC && BROKEN
-+	help
-+	  If you have a S3 Trio say Y. Say N for S3 Virge.
-+
-+config FB_SAVAGE
-+	tristate "S3 Savage support"
-+	depends on FB && PCI && EXPERIMENTAL
-+	select I2C_ALGOBIT if FB_SAVAGE_I2C
-+	select I2C if FB_SAVAGE_I2C
-+	select FB_DDC if FB_SAVAGE_I2C
-+	select FB_MODE_HELPERS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This driver supports notebooks and computers with S3 Savage PCI/AGP
-+	  chips.
-+
-+	  Say Y if you have such a graphics card.
-+
-+	  To compile this driver as a module, choose M here; the module
-+	  will be called savagefb.
-+
-+config FB_SAVAGE_I2C
-+       bool "Enable DDC2 Support"
-+       depends on FB_SAVAGE
-+       help
-+	  This enables I2C support for S3 Savage Chipsets.  This is used
-+	  only for getting EDID information from the attached display
-+	  allowing for robust video mode handling and switching.
-+
-+	  Because fbdev-2.6 requires that drivers must be able to
-+	  independently validate video mode parameters, you should say Y
-+	  here.
-+
-+config FB_SAVAGE_ACCEL
-+       bool "Enable Console Acceleration"
-+       depends on FB_SAVAGE
-+       default n
-+       help
-+          This option will compile in console acceleration support. If
-+          the resulting framebuffer console has bothersome glitches, then
-+          choose N here.
-+
-+config FB_SIS
-+	tristate "SiS/XGI display support"
-+	depends on FB && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the SiS 300, 315, 330
-+	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
-+	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
-+
-+	  To compile this driver as a module, choose M here; the module
-+	  will be called sisfb.
-+
-+config FB_SIS_300
-+	bool "SiS 300 series support"
-+	depends on FB_SIS
-+	help
-+	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
-+
-+config FB_SIS_315
-+	bool "SiS 315/330/340 series and XGI support"
-+	depends on FB_SIS
-+	help
-+	  Say Y here to support use of the SiS 315, 330 and 340 series
-+	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
-+	  as XGI V3XT, V5, V8 and Z7.
-+
-+config FB_NEOMAGIC
-+	tristate "NeoMagic display support"
-+	depends on FB && PCI
-+	select FB_MODE_HELPERS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This driver supports notebooks with NeoMagic PCI chips.
-+	  Say Y if you have such a graphics card. 
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called neofb.
-+
-+config FB_KYRO
-+	tristate "IMG Kyro support"
-+	depends on FB && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
-+	  graphics board.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called kyrofb.
-+
-+config FB_3DFX
-+	tristate "3Dfx Banshee/Voodoo3 display support"
-+	depends on FB && PCI
-+	select FB_CFB_IMAGEBLIT
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	help
-+	  This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
-+	  chips. Say Y if you have such a graphics board.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called tdfxfb.
-+
-+config FB_3DFX_ACCEL
-+	bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
-+	depends on FB_3DFX && EXPERIMENTAL
-+	---help---
-+	This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
-+	with acceleration functions.
-+
-+
-+config FB_VOODOO1
-+	tristate "3Dfx Voodoo Graphics (sst1) support"
-+	depends on FB && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
-+	  Voodoo2 (cvg) based graphics card.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called sstfb.
-+
-+	  WARNING: Do not use any application that uses the 3D engine
-+	  (namely glide) while using this driver.
-+	  Please read the <file:Documentation/fb/README-sstfb.txt> for supported
-+	  options and other important info  support.
-+
-+config FB_CYBLA
-+	tristate "Cyberblade/i1 support"
-+	depends on FB && PCI && X86_32 && !64BIT
-+	select FB_CFB_IMAGEBLIT
-+	select VIDEO_SELECT
-+	---help---
-+	  This driver is supposed to support the Trident Cyberblade/i1
-+	  graphics core integrated in the VIA VT8601A North Bridge,
-+	  also known as VIA Apollo PLE133.
-+
-+	  Status:
-+	   - Developed, tested and working on EPIA 5000 and EPIA 800.
-+	   - Does work reliable on all systems with CRT/LCD connected to
-+	     normal VGA ports.
-+	   - Should work on systems that do use the internal LCD port, but
-+	     this is absolutely not tested.
-+
-+	  Character imageblit, copyarea and rectangle fill are hw accelerated,
-+	  ypan scrolling is used by default.
-+
-+	  Please do read <file:Documentation/fb/cyblafb/*>.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called cyblafb.
-+
-+config FB_TRIDENT
-+	tristate "Trident support"
-+	depends on FB && PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  This driver is supposed to support graphics boards with the
-+	  Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
-+	  but also on some motherboards. For more information, read
-+	  <file:Documentation/fb/tridentfb.txt>
-+
-+	  Cyberblade/i1 support will be removed soon, use the cyblafb driver
-+	  instead.
-+
-+	  Say Y if you have such a graphics board.
-+
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called tridentfb.
-+
-+config FB_TRIDENT_ACCEL
-+	bool "Trident Acceleration functions (EXPERIMENTAL)"
-+	depends on FB_TRIDENT && EXPERIMENTAL
-+	---help---
-+	This will compile the Trident frame buffer device with
-+	acceleration functions.
-+
-+config FB_PM3
-+	tristate "Permedia3 support"
-+	depends on FB && PCI && BROKEN
-+	help
-+	  This is the frame buffer device driver for the 3DLabs Permedia3
-+	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
-+	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
-+	  and maybe other boards.
-+
-+config FB_AU1100
-+	bool "Au1100 LCD Driver"
-+	depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
-+
-+config FB_AU1200
-+	bool "Au1200 LCD Driver"
-+	depends on FB && MIPS && SOC_AU1200
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the framebuffer driver for the AMD Au1200 SOC.  It can drive
-+	  various panels and CRTs by passing in kernel cmd line option
-+	  au1200fb:panel=<name>.
-+
-+source "drivers/video/geode/Kconfig"
-+
-+config FB_FFB
-+	bool "Creator/Creator3D/Elite3D support"
-+	depends on FB_SBUS && SPARC64
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Creator, Creator3D,
-+	  and Elite3D graphics boards.
-+
-+config FB_TCX
-+	bool "TCX (SS4/SS5 only) support"
-+	depends on FB_SBUS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the TCX 24/8bit frame
-+	  buffer.
-+
-+config FB_CG14
-+	bool "CGfourteen (SX) support"
-+	depends on FB_SBUS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the CGfourteen frame
-+	  buffer on Desktop SPARCsystems with the SX graphics option.
-+
-+config FB_P9100
-+	bool "P9100 (Sparcbook 3 only) support"
-+	depends on FB_SBUS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the P9100 card
-+	  supported on Sparcbook 3 machines.
-+
-+config FB_LEO
-+	bool "Leo (ZX) support"
-+	depends on FB_SBUS
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the SBUS-based Sun ZX
-+	  (leo) frame buffer cards.
-+
-+config FB_PCI
-+	bool "PCI framebuffers"
-+	depends on (FB = y) && PCI && SPARC
-+
-+config FB_IGA
-+	bool "IGA 168x display support"
-+	depends on SPARC32 && FB_PCI
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the framebuffer device for the INTERGRAPHICS 1680 and
-+	  successor frame buffer cards.
-+
-+config FB_HIT
-+	tristate "HD64461 Frame Buffer support"
-+	depends on FB && HD64461
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This is the frame buffer device driver for the Hitachi HD64461 LCD
-+	  frame buffer card.
-+
-+config FB_PMAG_AA
-+	bool "PMAG-AA TURBOchannel framebuffer support"
-+	depends on (FB = y) && TC
-+ 	select FB_CFB_FILLRECT
-+ 	select FB_CFB_COPYAREA
-+ 	select FB_CFB_IMAGEBLIT
-+	help
-+	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
-+	  used mainly in the MIPS-based DECstation series.
-+
-+config FB_PMAG_BA
-+	bool "PMAG-BA TURBOchannel framebuffer support"
-+	depends on (FB = y) && TC
-+ 	select FB_CFB_FILLRECT
-+ 	select FB_CFB_COPYAREA
-+ 	select FB_CFB_IMAGEBLIT
-+	help
-+	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
-+	  used mainly in the MIPS-based DECstation series.
-+
-+config FB_PMAGB_B
-+	bool "PMAGB-B TURBOchannel framebuffer support"
-+	depends on (FB = y) && TC
-+ 	select FB_CFB_FILLRECT
-+ 	select FB_CFB_COPYAREA
-+ 	select FB_CFB_IMAGEBLIT
-+	help
-+	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
-+	  in the MIPS-based DECstation series. The card is currently only
-+	  supported in 1280x1024x8 mode.
-+
-+config FB_MAXINE
-+	bool "Maxine (Personal DECstation) onboard framebuffer support"
-+	depends on (FB = y) && MACH_DECSTATION
-+ 	select FB_CFB_FILLRECT
-+ 	select FB_CFB_COPYAREA
-+ 	select FB_CFB_IMAGEBLIT
-+	help
-+	  Support for the onboard framebuffer (1024x768x8) in the Personal
-+	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
-+	  Codename "Maxine").
-+
-+config FB_TX3912
-+	bool "TMPTX3912/PR31700 frame buffer support"
-+	depends on (FB = y) && NINO
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
-+	  see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
-+
-+	  Say Y here to enable kernel support for the on-board framebuffer.
-+
-+config FB_G364
-+	bool "G364 frame buffer support"
-+	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
-+ 	select FB_CFB_FILLRECT
-+ 	select FB_CFB_COPYAREA
-+ 	select FB_CFB_IMAGEBLIT
-+	help
-+	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
-+	  Olivetti M700-10 systems.
-+
-+config FB_68328
-+	bool "Motorola 68328 native frame buffer support"
-+	depends on FB && (M68328 || M68EZ328 || M68VZ328)
-+ 	select FB_CFB_FILLRECT
-+ 	select FB_CFB_COPYAREA
-+ 	select FB_CFB_IMAGEBLIT
-+	help
-+	  Say Y here if you want to support the built-in frame buffer of
-+	  the Motorola 68328 CPU family.
-+
-+config FB_PXA
-+	tristate "PXA LCD framebuffer support"
-+	depends on FB && ARCH_PXA
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Frame buffer driver for the built-in LCD controller in the Intel
-+	  PXA2x0 processor.
-+
-+	  This driver is also available as a module ( = code which can be
-+	  inserted and removed from the running kernel whenever you want). The
-+	  module will be called pxafb. If you want to compile it as a module,
-+	  say M here and read <file:Documentation/modules.txt>.
-+
-+	  If unsure, say N.
-+
-+config FB_PXA_PARAMETERS
-+	bool "PXA LCD command line parameters"
-+	default n
-+	depends on FB_PXA
-+	---help---
-+	  Enable the use of kernel command line or module parameters
-+	  to configure the physical properties of the LCD panel when
-+	  using the PXA LCD driver.
-+
-+	  This option allows you to override the panel parameters
-+	  supplied by the platform in order to support multiple
-+	  different models of flatpanel. If you will only be using a
-+	  single model of flatpanel then you can safely leave this
-+	  option disabled.
-+
-+	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
-+
-+config FB_MBX
-+	tristate "2700G LCD framebuffer support"
-+	depends on FB && ARCH_PXA
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
-+	  Accelerator
-+
-+config FB_MBX_DEBUG
-+       bool "Enable debugging info via debugfs"
-+       depends on FB_MBX && DEBUG_FS
-+       default n
-+       ---help---
-+         Enable this if you want debugging information using the debug
-+         filesystem (debugfs)
-+
-+         If unsure, say N.
-+
-+config FB_W100
-+	tristate "W100 frame buffer support"
-+	depends on FB && PXA_SHARPSL
-+ 	select FB_CFB_FILLRECT
-+ 	select FB_CFB_COPYAREA
-+ 	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
-+
-+	  This driver is also available as a module ( = code which can be
-+	  inserted and removed from the running kernel whenever you want). The
-+	  module will be called w100fb. If you want to compile it as a module,
-+	  say M here and read <file:Documentation/modules.txt>.
-+
-+	  If unsure, say N.
-+
-+config FB_S3C2410
-+	tristate "S3C2410 LCD framebuffer support"
-+	depends on FB && ARCH_S3C2410
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Frame buffer driver for the built-in LCD controller in the Samsung
-+	  S3C2410 processor.
-+
-+	  This driver is also available as a module ( = code which can be
-+	  inserted and removed from the running kernel whenever you want). The
-+	  module will be called s3c2410fb. If you want to compile it as a module,
-+	  say M here and read <file:Documentation/modules.txt>.
-+
-+	  If unsure, say N.
-+config FB_S3C2410_DEBUG
-+	bool "S3C2410 lcd debug messages"
-+	depends on FB_S3C2410
-+	help
-+	  Turn on debugging messages. Note that you can set/unset at run time
-+	  through sysfs
-+
-+config FB_PNX4008_DUM
-+	tristate "Display Update Module support on Philips PNX4008 board"
-+	depends on FB && ARCH_PNX4008
-+	---help---
-+	  Say Y here to enable support for PNX4008 Display Update Module (DUM)
-+
-+config FB_PNX4008_DUM_RGB
-+	tristate "RGB Framebuffer support on Philips PNX4008 board"
-+	depends on FB_PNX4008_DUM
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Say Y here to enable support for PNX4008 RGB Framebuffer
-+
-+config FB_IBM_GXT4500
-+	tristate "Framebuffer support for IBM GXT4500P adaptor"
-+	depends on PPC
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  Say Y here to enable support for the IBM GXT4500P display
-+	  adaptor, found on some IBM System P (pSeries) machines.
-+
-+config FB_VIRTUAL
-+	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
-+	depends on FB
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	---help---
-+	  This is a `virtual' frame buffer device. It operates on a chunk of
-+	  unswappable kernel memory instead of on the memory of a graphics
-+	  board. This means you cannot see any output sent to this frame
-+	  buffer device, while it does consume precious memory. The main use
-+	  of this frame buffer device is testing and debugging the frame
-+	  buffer subsystem. Do NOT enable it for normal systems! To protect
-+	  the innocent, it has to be enabled explicitly at boot time using the
-+	  kernel option `video=vfb:'.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called vfb. In order to load it, you must use
-+	  the vfb_enable=1 option.
-+
-+	  If unsure, say N.
-+if VT
-+	source "drivers/video/console/Kconfig"
-+endif
-+
-+if FB || SGI_NEWPORT_CONSOLE
-+	source "drivers/video/logo/Kconfig"
-+endif
-+
-+if SYSFS
-+	source "drivers/video/backlight/Kconfig"
-+endif
-+
-+endmenu
-+
 diff -uNr linux-2.6.20.vanilla/drivers/video/Makefile linux-2.6.20/drivers/video/Makefile
 --- linux-2.6.20.vanilla/drivers/video/Makefile	2007-02-10 19:02:14.000000000 +0100
 +++ linux-2.6.20/drivers/video/Makefile	2007-02-11 16:40:07.000000000 +0100
-- 
cgit v1.2.3


From 1e37747e5b6b1edf55ddd01569752866f8e679dd Mon Sep 17 00:00:00 2001
From: Holger Freyther <zecke@selfish.org>
Date: Fri, 16 Feb 2007 14:10:25 +0000
Subject: Add the DNARD/Shark machine configuration and kernel The DNARD/Shark
 was the Network Computer constructed by DEC with spare StrongARM processors.
 Here we use them as music basestations.

---
 packages/linux/linux-z/.mtn2git_empty       |    0
 packages/linux/linux-z/shark/.mtn2git_empty |    0
 packages/linux/linux-z/shark/defconfig      | 1126 +++++++++++++++++++++++++++
 packages/linux/linux-z_2.6.20.bb            |   23 +
 4 files changed, 1149 insertions(+)
 create mode 100644 packages/linux/linux-z/.mtn2git_empty
 create mode 100644 packages/linux/linux-z/shark/.mtn2git_empty
 create mode 100644 packages/linux/linux-z/shark/defconfig
 create mode 100644 packages/linux/linux-z_2.6.20.bb

(limited to 'packages/linux')

diff --git a/packages/linux/linux-z/.mtn2git_empty b/packages/linux/linux-z/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/packages/linux/linux-z/shark/.mtn2git_empty b/packages/linux/linux-z/shark/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/packages/linux/linux-z/shark/defconfig b/packages/linux/linux-z/shark/defconfig
new file mode 100644
index 0000000000..c9b11665db
--- /dev/null
+++ b/packages/linux/linux-z/shark/defconfig
@@ -0,0 +1,1126 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18-rc3
+# Tue Jan 16 00:41:41 2007
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+CONFIG_ARCH_SHARK=y
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA110=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WB=y
+
+#
+# Processor Features
+#
+# CONFIG_KEXEC is not set
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+CONFIG_ISA_DMA=y
+CONFIG_ISA_DMA_API=y
+CONFIG_PCI=y
+CONFIG_PCI_HOST_VIA82C505=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_BLK_DEV_IDEPCI is not set
+CONFIG_IDE_ARM=y
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_CS89x0=y
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_CYBER2000=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_SOUND_OSS=y
+# CONFIG_SOUND_TRACEINIT is not set
+# CONFIG_SOUND_DMAP is not set
+# CONFIG_SOUND_AD1816 is not set
+# CONFIG_SOUND_AD1889 is not set
+# CONFIG_SOUND_ADLIB is not set
+# CONFIG_SOUND_ACI_MIXER is not set
+# CONFIG_SOUND_CS4232 is not set
+# CONFIG_SOUND_SSCAPE is not set
+# CONFIG_SOUND_VMIDI is not set
+# CONFIG_SOUND_TRIX is not set
+# CONFIG_SOUND_MSS is not set
+# CONFIG_SOUND_MPU401 is not set
+# CONFIG_SOUND_NM256 is not set
+# CONFIG_SOUND_PAS is not set
+# CONFIG_SOUND_PSS is not set
+CONFIG_SOUND_SB=m
+# CONFIG_SOUND_YM3812 is not set
+# CONFIG_SOUND_OPL3SA2 is not set
+# CONFIG_SOUND_UART6850 is not set
+# CONFIG_SOUND_AEDSP16 is not set
+# CONFIG_SOUND_KAHLUA is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff --git a/packages/linux/linux-z_2.6.20.bb b/packages/linux/linux-z_2.6.20.bb
new file mode 100644
index 0000000000..b707a2649b
--- /dev/null
+++ b/packages/linux/linux-z_2.6.20.bb
@@ -0,0 +1,23 @@
+DESCRIPTION = "2.6 Linux Development Kernel for the DNARD/Shark, SIMpad."
+SECTION = "kernel"
+LICENSE = "GPL"
+
+inherit kernel
+
+S = "${WORKDIR}/git"
+SRC_URI = "git://www.openembedded.org/~zecke/git/linux/linux-2.6/.git;protocol=http \
+           file://defconfig"
+
+
+RPROVIDES_kernel-image += "hostap-modules"
+
+COMPATIBLE_HOST = "(arm).*-linux"
+COMPATIBLE_MACHINE = '(shark)'
+
+
+KERNEL_IMAGETYPE = "zImage"
+
+
+do_configure_prepend() {
+    install -m 0644 ${WORKDIR}/defconfig ${S}/.config
+}
-- 
cgit v1.2.3


From d85b776e350f00fc7a5e12b83abbef42919082f1 Mon Sep 17 00:00:00 2001
From: Rolf Leggewie <oe-devel@rolf.leggewie.biz>
Date: Fri, 16 Feb 2007 19:25:47 +0000
Subject: collie-kernels-2.4-embedix.bb: the 64-0 image for collie is generally
 more appropriate than the 24-8 one.

---
 packages/linux/collie-kernels-2.4-embedix.bb | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'packages/linux')

diff --git a/packages/linux/collie-kernels-2.4-embedix.bb b/packages/linux/collie-kernels-2.4-embedix.bb
index f53e86f6c4..022aca9ff8 100644
--- a/packages/linux/collie-kernels-2.4-embedix.bb
+++ b/packages/linux/collie-kernels-2.4-embedix.bb
@@ -6,7 +6,7 @@ PR = "r2"
 
 COMPATIBLE_HOST = "arm.*-linux"
 
-DEPENDS = '${@base_conditional("DISTRO_TYPE", "debug", "openzaurus-sa", "collie-kernel-24-8 collie-kernel-32-0 collie-kernel-32-32 collie-kernel-40-24 collie-kernel-48-16 collie-kernel-58-6 collie-kernel-64-0",d)}'
+DEPENDS = '${@base_conditional("DISTRO_TYPE", "debug", "openzaurus-sa", "collie-kernel-64-0 collie-kernel-24-8 collie-kernel-32-0 collie-kernel-32-32 collie-kernel-40-24 collie-kernel-48-16 collie-kernel-58-6",d)}'
 PACKAGES = ""
 EXCLUDE_FROM_WORLD = "1"
 
-- 
cgit v1.2.3