From a90c73d1c0f133ae4e0b32ec9c290597be03b876 Mon Sep 17 00:00:00 2001 From: John Bowler Date: Fri, 11 Nov 2005 07:07:34 +0000 Subject: nslu2-kernel: cleanup openslug, ucslugc and slugos kernels, ALL - remove old kernel versions - remove openslug-kernel - move patches from openslug-kernel - fix kernel UTS_RELEASE handling (requires change in kernel.bbclass) - fix nslu2-kernel MM build - move to 2.6.14.1 (important security fix) --- .../linux/openslug-kernel-2.6.11.2/nslu2-setup.c | 144 --------------------- 1 file changed, 144 deletions(-) delete mode 100644 packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c (limited to 'packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c') diff --git a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c b/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c deleted file mode 100644 index 358c58f22e..0000000000 --- a/packages/linux/openslug-kernel-2.6.11.2/nslu2-setup.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-setup.c - * - * NSLU2 board-setup - * - * based ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Author: Mark Rakes - * Maintainers: http://www.nslu2-linux.org/ - * - * Fixed missing init_time in MACHINE_START kas11 10/22/04 - * Changed to conform to new style __init ixdp425 kas11 10/22/04 - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef __ARMEB__ -#define REG_OFFSET 3 -#else -#define REG_OFFSET 0 -#endif - -/* - * NSLU2 uses only one serial port - */ -static struct uart_port nslu2_serial_ports[] = { - { - .membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART1_BASE_PHYS), - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 32 - } -#if 0 - , { - .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET), - .mapbase = (IXP4XX_UART2_BASE_PHYS), - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - .line = 1, - .type = PORT_XSCALE, - .fifosize = 32 - } -#endif -}; - -void __init nslu2_map_io(void) -{ - early_serial_setup(&nslu2_serial_ports[0]); -#if 0 - early_serial_setup(&nslu2_serial_ports[1]); -#endif - ixp4xx_map_io(); -} - -static struct flash_platform_data nslu2_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource nslu2_flash_resource = { - .start = NSLU2_FLASH_BASE, - .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nslu2_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &nslu2_flash_data, - }, - .num_resources = 1, - .resource = &nslu2_flash_resource, -}; - -static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { - .sda_pin = NSLU2_SDA_PIN, - .scl_pin = NSLU2_SCL_PIN, -}; - -static struct platform_device nslu2_i2c_controller = { - .name = "IXP4XX-I2C", - .id = 0, - .dev = { - .platform_data = &nslu2_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, - &nslu2_flash -}; - -static void n2_power_off(void) -{ - /* This causes the box to drop the power and go dead. */ -#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 - *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio - *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed -} - -static void __init nslu2_init(void) -{ - /* Need power off to work. */ - pm_power_off = n2_power_off; - platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); -} - -MACHINE_START(NSLU2, "Linksys NSLU2") - MAINTAINER("www.nslu2-linux.org") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(nslu2_map_io) - INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here - .timer = &ixp4xx_timer, - // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? - BOOT_PARAMS(0x0100) - INIT_MACHINE(nslu2_init) -MACHINE_END -- cgit v1.2.3