From 91406f103cfb290cdb61cb5bff580876c3c4bc38 Mon Sep 17 00:00:00 2001 From: John Bowler Date: Fri, 23 Sep 2005 00:58:31 +0000 Subject: nslu2-kernel: working copies of patches to push upstream --- .../nslu2-kernel/2.6/10-ixp4xx-copy-from.patch | 27 + .../linux/nslu2-kernel/2.6/10-ixp4xx-regs.patch | 11 + packages/linux/nslu2-kernel/2.6/20-timer.patch | 16 + packages/linux/nslu2-kernel/2.6/30-i2c-x1205.patch | 580 ++++++++ .../linux/nslu2-kernel/2.6/40-mtd-shutdown.patch | 66 + .../linux/nslu2-kernel/2.6/50-nslu2-arch.patch | 84 ++ .../linux/nslu2-kernel/2.6/50-nslu2-include.patch | 47 + .../linux/nslu2-kernel/2.6/50-nslu2-setup.patch | 1156 ++++++++++++++++ .../linux/nslu2-kernel/2.6/55-nslu2-rpbutton.patch | 139 ++ .../linux/nslu2-kernel/2.6/70-xscale-reset.patch | 155 +++ .../linux/nslu2-kernel/2.6/90-little-endian.patch | 148 ++ .../nslu2-kernel/2.6/95-nslu2-defconfig.patch | 1442 ++++++++++++++++++++ .../nslu2-kernel/2.6/96-nslu2-le-defconfig.patch | 29 + 13 files changed, 3900 insertions(+) create mode 100644 packages/linux/nslu2-kernel/2.6/10-ixp4xx-copy-from.patch create mode 100644 packages/linux/nslu2-kernel/2.6/10-ixp4xx-regs.patch create mode 100644 packages/linux/nslu2-kernel/2.6/20-timer.patch create mode 100644 packages/linux/nslu2-kernel/2.6/30-i2c-x1205.patch create mode 100644 packages/linux/nslu2-kernel/2.6/40-mtd-shutdown.patch create mode 100644 packages/linux/nslu2-kernel/2.6/50-nslu2-arch.patch create mode 100644 packages/linux/nslu2-kernel/2.6/50-nslu2-include.patch create mode 100644 packages/linux/nslu2-kernel/2.6/50-nslu2-setup.patch create mode 100644 packages/linux/nslu2-kernel/2.6/55-nslu2-rpbutton.patch create mode 100644 packages/linux/nslu2-kernel/2.6/70-xscale-reset.patch create mode 100644 packages/linux/nslu2-kernel/2.6/90-little-endian.patch create mode 100644 packages/linux/nslu2-kernel/2.6/95-nslu2-defconfig.patch create mode 100644 packages/linux/nslu2-kernel/2.6/96-nslu2-le-defconfig.patch (limited to 'packages/linux/nslu2-kernel') diff --git a/packages/linux/nslu2-kernel/2.6/10-ixp4xx-copy-from.patch b/packages/linux/nslu2-kernel/2.6/10-ixp4xx-copy-from.patch new file mode 100644 index 0000000000..8d0f187d44 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/10-ixp4xx-copy-from.patch @@ -0,0 +1,27 @@ +--- linux-2.6.11/drivers/mtd/maps/ixp4xx.c.orig 2005-03-05 20:00:28.000000000 +0100 ++++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-03-05 22:10:48.000000000 +0100 +@@ -29,6 +29,8 @@ + #include + #include + ++#include ++ + #include + + #ifndef __ARMEB__ +@@ -60,13 +62,13 @@ static void ixp4xx_copy_from(struct map_ + u16 data; + + for (i = 0; i < (len / 2); i++) { +- data = src[i]; ++ data = get_unaligned((u16*)(src + i)); + dest[i * 2] = BYTE0(data); + dest[i * 2 + 1] = BYTE1(data); + } + + if (len & 1) +- dest[len - 1] = BYTE0(src[i]); ++ dest[len - 1] = BYTE0(get_unaligned((u16*)(src + i))); + } + + /* diff --git a/packages/linux/nslu2-kernel/2.6/10-ixp4xx-regs.patch b/packages/linux/nslu2-kernel/2.6/10-ixp4xx-regs.patch new file mode 100644 index 0000000000..32f7e3ccb8 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/10-ixp4xx-regs.patch @@ -0,0 +1,11 @@ +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 23:37:49.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-06-17 17:51:32.569981939 -0700 +@@ -52,7 +52,7 @@ + * Expansion BUS Configuration registers + */ + #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) +-#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000) ++#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) + #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) + + /* diff --git a/packages/linux/nslu2-kernel/2.6/20-timer.patch b/packages/linux/nslu2-kernel/2.6/20-timer.patch new file mode 100644 index 0000000000..356da6bb28 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/20-timer.patch @@ -0,0 +1,16 @@ +diff -urN linux-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h +--- linux-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h 2005-09-17 12:42:45.000000000 +0200 ++++ nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h 2005-09-17 12:15:31.000000000 +0200 +@@ -9,7 +9,12 @@ + * We use IXP425 General purpose timer for our timer needs, it runs at + * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the + * timer register ignores the bottom 2 bits of the LATCH value. ++ * The NSLU2 has a 33.00MHz crystal, so a different FREQ is required. + */ ++#ifdef CONFIG_ARCH_NSLU2 ++#define FREQ 66000000 ++#else + #define FREQ 66666666 ++#endif + #define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) + diff --git a/packages/linux/nslu2-kernel/2.6/30-i2c-x1205.patch b/packages/linux/nslu2-kernel/2.6/30-i2c-x1205.patch new file mode 100644 index 0000000000..f05609f1e6 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/30-i2c-x1205.patch @@ -0,0 +1,580 @@ +diff -urN linux-2.6.13.1/drivers/i2c/chips/Kconfig nslu2-2.6.13.1/drivers/i2c/chips/Kconfig +--- linux-2.6.13.1/drivers/i2c/chips/Kconfig 2005-09-17 12:42:33.000000000 +0200 ++++ nslu2-2.6.13.1/drivers/i2c/chips/Kconfig 2005-09-17 13:46:42.000000000 +0200 +@@ -136,4 +136,14 @@ + This driver can also be built as a module. If so, the module + will be called max6875. + ++config SENSORS_X1205 ++ tristate "Xicor X1205 RTC chip" ++ depends on I2C && EXPERIMENTAL ++ select I2C_SENSOR ++ help ++ If you say yes here you get support for the Xicor x1205 RTC chip. ++ ++ This driver can also be built as a module. If so, the module ++ will be called x1205-rtc ++ + endmenu +diff -urN linux-2.6.13.1/drivers/i2c/chips/Makefile nslu2-2.6.13.1/drivers/i2c/chips/Makefile +--- linux-2.6.13.1/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200 ++++ nslu2-2.6.13.1/drivers/i2c/chips/Makefile 2005-09-17 13:35:39.000000000 +0200 +@@ -13,6 +13,7 @@ + obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + obj-$(CONFIG_TPS65010) += tps65010.o ++obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o + + ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) + EXTRA_CFLAGS += -DDEBUG +diff -urN linux-2.6.13.1/drivers/i2c/chips/x1205-rtc.c nslu2-2.6.13.1/drivers/i2c/chips/x1205-rtc.c +--- linux-2.6.13.1/drivers/i2c/chips/x1205-rtc.c 1970-01-01 01:00:00.000000000 +0100 ++++ nslu2-2.6.13.1/drivers/i2c/chips/x1205-rtc.c 2005-09-17 13:51:03.000000000 +0200 +@@ -0,0 +1,547 @@ ++/* ++ x1205 - an 12c driver for the Xicor X1205 RTC ++ Copyright 2004 Karen Spearel ++ ++ please send all reports to: ++ kas11 at tampabay dot rr dot com ++ ++ based on linux/drivers/acron/char/pcf8583.h ++ Copyright (C) 2000 Russell King ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++*/ ++/* ++ ++ * i2c_adapter is the structure used to identify a physical i2c bus along ++ * with the access algorithms necessary to access it. ++ ++struct i2c_adapter { ++ struct module *owner; ++ unsigned int id; == is algo->id | hwdep.struct->id, for registered values see below ++ unsigned int class; ++ struct i2c_algorithm *algo; the algorithm to access the bus ++ void *algo_data; ++ ++ --- administration stuff. ++ int (*client_register)(struct i2c_client *); ++ int (*client_unregister)(struct i2c_client *); ++ ++ data fields that are valid for all devices ++ struct semaphore bus_lock; ++ struct semaphore clist_lock; ++ ++ int timeout; ++ int retries; ++ struct device dev; the adapter device ++ struct class_device class_dev; the class device ++ ++#ifdef CONFIG_PROC_FS ++ No need to set this when you initialize the adapter ++ int inode; ++#endif def CONFIG_PROC_FS ++ ++ int nr; ++ struct list_head clients; ++ struct list_head list; ++ char name[I2C_NAME_SIZE]; ++ struct completion dev_released; ++ struct completion class_dev_released; ++}; ++*/ ++ ++ ++/*========== Driver for the X1205 on the Linksys NSLU2 ==================*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define RTC_GETDATETIME 0 ++#define RTC_SETTIME 1 ++#define RTC_SETDATETIME 2 ++ ++#define I2C_M_WR 0 // just for consistancy ++ ++// offsets into read buf - add 2 for write buf ++#define CCR_SEC 0 ++#define CCR_MIN 1 ++#define CCR_HOUR 2 ++#define CCR_MDAY 3 ++#define CCR_MONTH 4 ++#define CCR_YEAR 5 ++#define CCR_WDAY 6 ++#define CCR_Y2K 7 ++ ++#define X1205_I2C_BUS_ADDR 0x6f // hardwired into x1205 ++#define X1205_ALM0_BASE 0x00 // Base address of the ALM0 ++#define X1205_CCR_BASE 0x30 // Base address of the CCR ++#define X1205_SR_ADDR 0x3f // Status Register ++#define X1205_SR_WEL 0x02 // Write Enable Latch bit ++#define X1205_SR_RWEL 0x04 // Register Write Enable Bit ++#define X1205_MILBIT 0x80 // this bit set in ccr.hour for 24 hr mode ++#define NOERR 0 ++#define RTC_NODATE 0 ++#define RTC_DATETOO 1 ++ ++// comment out next line is your x1205 can't do page writes ++//#define X1205PAGEWRITE 1 ++#ifdef X1205PAGEWRITE ++#define DRIVERNAME "Xicor x1205 RTC Driver v0.9.3.3" ++#else ++#define DRIVERNAME "Xicor x1205 RTC Dvr v0.9.3.3NPW" ++#endif ++ ++#define DEBUG KERN_DEBUG ++ ++ ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base); ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base); ++static int x1205_attach(struct i2c_adapter *adapter); ++static int x1205_detach(struct i2c_client *client); ++static int x1205_validate_tm(struct rtc_time *tm); ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg); ++static int x1205_sync_rtc(void); ++static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr); ++static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); ++static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data); ++ ++static struct i2c_driver x1205_driver = { ++ .owner = THIS_MODULE, ++ .name = DRIVERNAME, ++ .id = I2C_DRIVERID_EXP0, ++ .flags = I2C_DF_NOTIFY, ++ .attach_adapter = &x1205_attach, //we don't need to probe...x1205 is hardwired @ 0x6f ++ .detach_client = &x1205_detach, ++ .command = &x1205_command, //this prolly never gets called...used internally tho ++}; ++ ++static struct i2c_client x1205_i2c_client = { ++ .flags = 0, ++ .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit ++ .adapter = NULL, // the adapter we sit on assigned in attach ++ .driver = &x1205_driver, // and our access routines ++ .usage_count = 0, // How many accesses currently to this client ++ .dev = {}, // the device structure ++ .list = {}, ++ .name = DRIVERNAME, ++ .released = {}, ++}; ++ ++static struct file_operations rtc_fops = { ++ owner: THIS_MODULE, ++ ioctl: x1205_ioctl, ++ read: x1205_read, ++}; ++ ++static struct miscdevice x1205_miscdev = { ++ .minor = RTC_MINOR, ++ .name = "rtc", ++ .fops = &rtc_fops, ++}; ++extern int (*set_rtc)(void); ++static unsigned epoch = 1900; //coresponds to year 0 ++static unsigned rtc_epoch = 2000; ++static const unsigned char days_in_mo[] = ++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; ++ ++//===================================CODE====================================== ++// in the routines that deal directly with the x1205 hardware, we use ++// rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch ++// Epoch is inited as 2000. Time is set to UT ++//============================================================================= ++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, u8 reg_base) ++{ ++ static unsigned char addr[2] = { 0,} ; ++ unsigned char buf[8]; ++ struct i2c_msg msgs[2] = { ++ { client->addr, I2C_M_WR, 2, addr }, //msg 1 = send base address ++ { client->addr, I2C_M_RD, 8, buf }, //msg 2 = read sequential data ++ }; ++ addr[1] = reg_base; ++ if ((i2c_transfer(client->adapter, msgs, 2)) == 2) { //did we read 2 messages? ++ printk(KERN_DEBUG "raw x1205 read data - sec-%02x min-%02x hr-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", ++ buf[0],buf[1],buf[2],buf[3],buf[4],buf[5],buf[6], buf[7]); ++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]); ++ tm->tm_min = BCD2BIN(buf[CCR_MIN]); ++ buf[CCR_HOUR] &= ~X1205_MILBIT; ++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); //hr is 0-23 ++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); ++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); ++ rtc_epoch = BCD2BIN(buf[CCR_Y2K]) * 100; ++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + rtc_epoch - epoch; ++ tm->tm_wday = buf[CCR_WDAY]; ++ printk(KERN_DEBUG "rtc_time output data - sec-%02d min-%02d hr-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", ++ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday,epoch, rtc_epoch); ++ } else { ++ printk(KERN_DEBUG "i2c_transfer Read Error\n"); ++ return -EIO; ++ } ++ ++ return NOERR; ++} ++// x1205pagewrite allows writing a block of registers in msg3 even though the x1205 says ++// nothing about this in its spec. ++// it needs more testing as it is possible some x1205s are actually not-completely- ++// functional x1226s and there is a reason for the multiple write to not be in the spec. ++// anyhow, it is enabled for the time being...and we even push out luck by sending 10 bytes ++ ++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, int datetoo, u8 reg_base) ++{ ++ static unsigned char wel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL }; ++ static unsigned char rwel[3] = { 0, X1205_SR_ADDR, X1205_SR_WEL | X1205_SR_RWEL }; ++ static unsigned char diswe[3] = { 0, X1205_SR_ADDR, 0 }; ++ ++#ifdef X1205PAGEWRITE ++ ++ static unsigned char buf[10] = { 0, X1205_CCR_BASE, }; ++ struct i2c_msg msgs[4] = { ++ { client->addr, I2C_M_WR, 3, wel }, //msg 1 = write WEL to to ccr sr ++ { client->addr, I2C_M_WR, 3, rwel }, //msg 2 = write RWEL to ccr sr ++ { client->addr, I2C_M_WR, 10, buf }, //msg 3 = write ccr base addr +seq data ++ { client->addr, I2C_M_WR, 3, diswe }, //msg 4 = 0 to ccr sr to disable writes ++ }; ++ ++ msgs[2].len = 5; // 5 bytes + addr to set time only ++ buf [1] = reg_base; ++ buf[CCR_SEC+2] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN+2] = BIN2BCD(tm->tm_min); ++ buf[CCR_HOUR+2] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format ++ if (datetoo == 1) { ++ buf[CCR_MDAY+2] = BIN2BCD(tm->tm_mday); ++ buf[CCR_MONTH+2] = BIN2BCD(tm->tm_mon); // input is 0-11 ++ buf[CCR_YEAR+2] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 ++ buf[CCR_WDAY+2] = tm->tm_wday & 7; ++ buf[CCR_Y2K+2] = BIN2BCD((rtc_epoch/100)); ++ msgs[2].len += 5; //5 more bytes to set date ++ } ++ printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", ++ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); ++ printk(KERN_DEBUG "BCD write data - sec-%02x min-%02x hour-%02x mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n", ++ buf[2],buf[3],buf[4],buf[5],buf[6], buf[7], buf[8], buf[9]); ++ ++ if ((i2c_transfer(client->adapter, msgs, 4)) != 4) ++ return -EIO; ++ return NOERR; ++ ++#else //do this if page writes aren't working ++ ++ int i,xfer; ++ static unsigned char data[3] = { 0,}; ++ static unsigned char buf[8]; ++ ++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec); ++ buf[CCR_MIN] = BIN2BCD(tm->tm_min); ++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_MILBIT; // set 24 hour format ++ if (datetoo == 1) { ++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); ++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); // input is 0-11 ++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + epoch - rtc_epoch)); // input is yrs since 1900 ++ buf[CCR_WDAY] = tm->tm_wday & 7; ++ buf[CCR_Y2K] = BIN2BCD((rtc_epoch/100)); ++ } ++ printk(KERN_DEBUG "rtc_time input - sec-%02d min-%02d hour-%02d mday-%02d mon-%02d year-%02d wday-%02d epoch-%d rtc_epoch-%d\n", ++ tm->tm_sec,tm->tm_min,tm->tm_hour,tm->tm_mday,tm->tm_mon,tm->tm_year,tm->tm_wday, epoch, rtc_epoch); ++ ++ xfer = i2c_master_send(client, wel, 3); ++ printk(KERN_DEBUG "wen - %x\n", xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ xfer = i2c_master_send(client, rwel, 3); ++ printk(KERN_DEBUG "wenb - %x\n", xfer); ++ if (xfer != 3) ++ return -EIO; ++ ++ for (i = 0; i < 8; i++) { ++ data[1] = i + reg_base; ++ data[2] = buf[i]; ++ xfer = i2c_master_send(client, data, 3); ++ printk(KERN_DEBUG "xfer - %d addr - %02x data - %02x\n", xfer, data[1], data[2]); ++ if (xfer != 3) ++ return -EIO; ++ }; ++ ++ xfer = i2c_master_send(client, diswe, 3); ++ printk(KERN_DEBUG "wdis - %x\n", xfer); ++ if (xfer != 3) ++ return -EIO; ++ return NOERR; ++#endif ++} ++//============================================================================= ++ ++static int x1205_attach(struct i2c_adapter *adapter) ++{ ++ struct rtc_time tm; ++ struct timespec tv; ++ int errno; ++ ++ x1205_i2c_client.adapter = adapter; ++// x1205_i2c_client.id++; ++ ++ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver ++ return -EIO; ++ ++ if ((errno = i2c_attach_client(&x1205_i2c_client)) != NOERR) ++ return errno; ++ ++ tv.tv_nsec = tm.tm_sec * 10000000; ++ tv.tv_sec = mktime(tm.tm_year+epoch, tm.tm_mon, tm.tm_mday, tm.tm_hour, ++ tm.tm_min, tm.tm_sec); ++ do_settimeofday(&tv); ++ set_rtc = x1205_sync_rtc; ++ ++ printk(KERN_DEBUG "%s attached on adapter %s\n",x1205_i2c_client.name, ++ x1205_i2c_client.adapter->name); //why is this name a null string? ++ ++ return NOERR; ++} ++ ++static int x1205_detach(struct i2c_client *client) ++{ ++ int errno; ++ ++ if ((errno = i2c_detach_client(client)) != 0) { ++ printk(KERN_DEBUG "i2c_detach failed - errno = %d\n", errno); ++ return errno; ++ } ++ ++ return NOERR; ++} ++ ++// make sure the rtc_time values are in bounds ++static int x1205_validate_tm(struct rtc_time *tm) ++{ ++ tm->tm_year += 1900; ++ ++ if (tm->tm_year < 1970) ++ return -EINVAL; ++ ++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) ++ return -EINVAL; ++ ++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) && ++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400))))) ++ return -EINVAL; ++ ++ if ((tm->tm_year -= epoch) > 255) ++ return -EINVAL; ++ ++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) ++ return -EINVAL; ++ return NOERR; ++} ++ ++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm) ++{ ++ int errno, dodate = RTC_DATETOO; ++ ++ if (client == NULL || tm == NULL) ++ return -EINVAL; ++ if (!capable(CAP_SYS_TIME)) ++ return -EACCES; ++ ++ printk(KERN_DEBUG "x1205_command %d\n", cmd); ++ ++ switch (cmd) { ++ case RTC_GETDATETIME: ++ return x1205_get_datetime(client, tm, X1205_CCR_BASE); ++ ++ case RTC_SETTIME: // note fall thru ++ dodate = RTC_NODATE; ++ case RTC_SETDATETIME: ++ if ((errno = x1205_validate_tm(tm)) < NOERR) ++ return errno; ++ return x1205_set_datetime(client, tm, dodate, X1205_CCR_BASE); ++ ++ default: ++ return -EINVAL; ++ } ++} ++ ++static int x1205_sync_rtc(void) ++{ ++ struct rtc_time new_tm, old_tm; ++ unsigned long cur_secs = xtime.tv_sec; ++ ++ printk(KERN_DEBUG "x1205_sync_rtc entry\n"); ++ ++ if (x1205_command(&x1205_i2c_client, RTC_GETDATETIME, &old_tm)) ++ return 0; ++ ++// xtime.tv_nsec = old_tm.tm_sec * 10000000; //FIXME: ++ new_tm.tm_sec = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_min = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_hour = cur_secs % 24; ++ ++ /* ++ * avoid writing when we're going to change the day ++ * of the month. We will retry in the next minute. ++ * This basically means that if the RTC must not drift ++ * by more than 1 minute in 11 minutes. ++ */ ++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || ++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) ++ return 1; ++ printk(KERN_DEBUG "x1205_sync_rtc exit\n"); ++ ++ return x1205_command(&x1205_i2c_client, RTC_SETTIME, &new_tm); ++} ++ ++static int x1205_read(struct file *file, char *buf, size_t count, loff_t *ptr) ++{ ++ struct rtc_time tm; ++ ++ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) ++ return -EIO; ++ return copy_to_user(buf, &tm, sizeof(tm)) ? -EFAULT : NOERR; ++} ++ ++//============================================================================== ++ ++static int x1205_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ struct rtc_time tm; ++ int errno; ++ ++ printk(KERN_DEBUG "ioctl = %x\n", cmd); ++ ++ switch (cmd) { ++ case RTC_RD_TIME: ++ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) ++ return -EIO; ++ break; ++ ++ case RTC_SET_TIME: ++ if (!capable(CAP_SYS_TIME)) ++ return -EACCES; ++ ++ if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) ++ return -EFAULT; ++ if ((errno = x1205_validate_tm(&tm)) < NOERR) ++ return errno; ++ return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_CCR_BASE); ++ ++ case RTC_ALM_SET: //FIXME: set Control Regs ++ if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) ++ return -EFAULT; ++ return x1205_set_datetime(&x1205_i2c_client, &tm, RTC_DATETOO, X1205_ALM0_BASE); ++ ++ case RTC_ALM_READ: ++ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_ALM0_BASE)) < NOERR) ++ return -EIO; ++ break; ++ ++ case RTC_EPOCH_READ: ++ ++ return put_user (epoch, (unsigned long __user *)arg); ++ ++ case RTC_EPOCH_SET: ++ if (arg < 1900) ++ return -EINVAL; ++ ++ if (!capable(CAP_SYS_TIME)) ++ return -EACCES; ++ ++ epoch = arg; ++ return 0; ++ ++ default: ++ return -ENOTTY; ++ } ++ return copy_to_user((void __user *)arg, &tm, sizeof tm) ? -EFAULT : 0; ++ ++} ++ ++static int x1205_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) ++{ ++ struct rtc_time tm; ++ int slen, errno; ++ ++ if ((errno = x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) < NOERR) ++ return errno; ++ ++// here we return the real year and the month as 1-12 since it is human-readable ++ slen = sprintf(buf, "rtc_time\t: %02d:%02d:%02d\nrtc_date\t: %04d-%02d-%02d\n", ++ tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year + 1900, tm.tm_mon+1, tm.tm_mday); ++ printk(KERN_DEBUG "raw rtc_time\t: %02d:%02d:%02d\nraw rtc_date\t: %04d-%02d-%02d\n", ++ tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_year, tm.tm_mon, tm.tm_mday); ++ ++ if (slen <= off + len) ++ *eof = 1; ++ *start = buf + off; ++ slen -= off; ++ if (slen > len) ++ slen = len; ++ if ( slen < 0 ) ++ slen = 0; ++ ++ return slen; ++} ++ ++static int __init x1205_init(void) ++{ ++ struct rtc_time tm; ++ int errno; ++ printk(KERN_INFO "LOADED %s\n", DRIVERNAME); ++ ++ if ((errno = i2c_add_driver(&x1205_driver)) != NOERR) { ++ dev_dbg(x1205_i2c_client.dev, "x1205_init failed - errno = %d\n", errno); ++ return (errno); ++ } ++ if ((errno = misc_register(&x1205_miscdev)) != NOERR) { ++ dev_dbg(x1205_i2c_client.dev, "Register Misc Driver failed - errno = %d\n", errno); ++ i2c_del_driver(&x1205_driver); ++ return errno; ++ } ++ if (create_proc_read_entry("driver/rtc", 0, NULL, x1205_read_proc, NULL) < NOERR) ++ return -ENOMEM; ++ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functionality ++ return -EIO; ++ ++ return NOERR; ++} ++ ++static void __exit x1205_exit(void) ++{ ++ remove_proc_entry("driver/rtc", NULL); ++ misc_deregister(&x1205_miscdev); ++ i2c_del_driver(&x1205_driver); ++ set_rtc = NULL; ++} ++ ++MODULE_AUTHOR("Karen Spearel "); ++MODULE_DESCRIPTION("Xicor X1205-RTC Driver"); ++MODULE_LICENSE("GPL"); ++static int debug = 7; ++module_param(debug, bool, 0644); ++MODULE_PARM_DESC(debug, "Debugging enabled = 1"); ++ ++module_init(x1205_init); ++module_exit(x1205_exit); diff --git a/packages/linux/nslu2-kernel/2.6/40-mtd-shutdown.patch b/packages/linux/nslu2-kernel/2.6/40-mtd-shutdown.patch new file mode 100644 index 0000000000..e7cce4ebc0 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/40-mtd-shutdown.patch @@ -0,0 +1,66 @@ +# Ensure that the MTD is shut down on halt/reboot, otherwise the +# hardware reset hangs + +--- linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c.orig 2005-07-17 15:07:47.790388300 -0700 ++++ linux-2.6.12.2/drivers/mtd/maps/ixp4xx.c 2005-07-17 17:00:08.082672710 -0700 +@@ -144,6 +144,52 @@ + return 0; + } + ++static void ixp4xx_flash_shutdown(struct device *_dev) ++{ ++ struct platform_device *dev = to_platform_device(_dev); ++ struct flash_platform_data *plat = dev->dev.platform_data; ++ struct ixp4xx_flash_info *info = dev_get_drvdata(&dev->dev); ++ map_word d; ++ ++ dev_set_drvdata(&dev->dev, NULL); ++ ++ if(!info) ++ return; ++ ++ /* ++ * This is required for a soft reboot to work. ++ */ ++ d.x[0] = 0xff; ++ ixp4xx_write16(&info->map, d, 0x55 * 0x2); ++ ++#if 0 ++ /* This is commented out because it seems to cause a kernel ++ * panic (at least if it isn't commented out the kernel fails ++ * to shut down). Should be investigated. ++ */ ++ if (info->mtd) { ++ del_mtd_partitions(info->mtd); ++ map_destroy(info->mtd); ++ } ++#endif ++ if (info->map.map_priv_1) ++ iounmap((void *) info->map.map_priv_1); ++ ++ if (info->partitions) ++ kfree(info->partitions); ++ ++ if (info->res) { ++ release_resource(info->res); ++ kfree(info->res); ++ } ++ ++ if (plat->exit) ++ plat->exit(); ++ ++ /* Disable flash write */ ++ *IXP4XX_EXP_CS0 &= ~IXP4XX_FLASH_WRITABLE; ++} ++ + static int ixp4xx_flash_probe(struct device *_dev) + { + struct platform_device *dev = to_platform_device(_dev); +@@ -243,6 +289,7 @@ + .bus = &platform_bus_type, + .probe = ixp4xx_flash_probe, + .remove = ixp4xx_flash_remove, ++ .shutdown = ixp4xx_flash_shutdown, + }; + + static int __init ixp4xx_flash_init(void) diff --git a/packages/linux/nslu2-kernel/2.6/50-nslu2-arch.patch b/packages/linux/nslu2-kernel/2.6/50-nslu2-arch.patch new file mode 100644 index 0000000000..f49ea7f1c3 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/50-nslu2-arch.patch @@ -0,0 +1,84 @@ +--- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700 ++++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700 +@@ -37,6 +37,7 @@ + defined(CONFIG_ARCH_INTEGRATOR) || \ + defined(CONFIG_ARCH_PXA) || \ + defined(CONFIG_ARCH_IXP4XX) || \ ++ defined(CONFIG_ARCH_NSLU2) || \ + defined(CONFIG_ARCH_IXP2000) || \ + defined(CONFIG_ARCH_LH7A40X) || \ + defined(CONFIG_ARCH_OMAP) +--- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800 ++++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700 +@@ -47,3 +47,8 @@ + orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) + #endif + ++#ifdef CONFIG_ARCH_NSLU2 ++ mov r7, #(MACH_TYPE_NSLU2 & 0xff) ++ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00) ++#endif ++ +--- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700 ++++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700 +@@ -43,6 +43,12 @@ + IXDP465 Development Platform (Also known as BMP). + For more information on this platform, see . + ++config ARCH_NSLU2 ++ bool "NSLU2" ++ help ++ Say 'Y' here if you want your kernel to support Linksys's ++ NSLU2 NAS device. For more information on this platform, ++ see http://www.nslu2-linux.org + + # + # IXCDP1100 is the exact same HW as IXDP425, but with a different machine +--- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types 2005-06-17 17:51:27.423762020 -0700 ++++ linux-2.6.11/arch/arm/tools/mach-types 2005-06-17 17:51:32.564982697 -0700 +@@ -604,7 +604,7 @@ + roverp7 MACH_ROVERP7 ROVERP7 594 + pr818s MACH_PR818S PR818S 595 + trxpro MACH_TRXPRO TRXPRO 596 +-nslu2 MACH_NSLU2 NSLU2 597 ++nslu2 ARCH_NSLU2 NSLU2 597 + e400 MACH_E400 E400 598 + trab MACH_TRAB TRAB 599 + cmc_pu2 MACH_CMC_PU2 CMC_PU2 600 +--- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800 ++++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700 +@@ -94,7 +94,11 @@ + struct resource *res; + }; + ++#ifdef CONFIG_ARCH_NSLU2 ++static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL }; ++#else + static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; ++#endif + + static int ixp4xx_flash_remove(struct device *_dev) + { +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700 +@@ -44,5 +44,6 @@ + #include "ixdp425.h" + #include "coyote.h" + #include "prpmc1100.h" ++#include "nslu2.h" + + #endif /* _ASM_ARCH_HARDWARE_H */ +--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800 ++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700 +@@ -93,4 +93,11 @@ + #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 + #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + ++/* ++ * NSLU2 board IRQs ++ */ ++#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 ++#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 ++#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 ++ + #endif diff --git a/packages/linux/nslu2-kernel/2.6/50-nslu2-include.patch b/packages/linux/nslu2-kernel/2.6/50-nslu2-include.patch new file mode 100644 index 0000000000..c69e69c53e --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/50-nslu2-include.patch @@ -0,0 +1,47 @@ +diff -urN linux-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h +--- linux-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 01:00:00.000000000 +0100 ++++ nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/nslu2.h 2005-09-16 18:58:05.000000000 +0200 +@@ -0,0 +1,43 @@ ++/* ++ * include/asm-arm/arch-ixp4xx/nslu2.h ++ * ++ * NSLU2 platform specific definitions ++ * ++ * Author: Mark Rakes ++ * Maintainers: http://www.nslu2-linux.org ++ * ++ * based on ixdp425.h: ++ * Copyright 2004 (c) MontaVista, Software, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++// GPIO 8 is used as the power input so is not free for use as a PCI IRQ ++// kas11 11-2-04 ++ ++#ifndef __ASM_ARCH_HARDWARE_H__ ++#error "Do not include this directly, instead #include " ++#endif ++ ++#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS ++#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE ++ ++#define NSLU2_SDA_PIN 7 ++#define NSLU2_SCL_PIN 6 ++ ++/* ++ * NSLU2 PCI IRQs ++ */ ++#define NSLU2_PCI_MAX_DEV 3 ++#define NSLU2_PCI_IRQ_LINES 3 ++ ++ ++/* PCI controller GPIO to IRQ pin mappings */ ++#define NSLU2_PCI_INTA_PIN 11 ++#define NSLU2_PCI_INTB_PIN 10 ++#define NSLU2_PCI_INTC_PIN 9 ++//#define NSLU2_PCI_INTD_PIN 8 ++ ++ diff --git a/packages/linux/nslu2-kernel/2.6/50-nslu2-setup.patch b/packages/linux/nslu2-kernel/2.6/50-nslu2-setup.patch new file mode 100644 index 0000000000..f38c0c8b3e --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/50-nslu2-setup.patch @@ -0,0 +1,1156 @@ +diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/Makefile nslu2-2.6.13.1/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.13.1/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:42:02.000000000 +0200 ++++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/Makefile 2005-09-17 12:44:11.000000000 +0200 +@@ -8,4 +8,5 @@ + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o ++obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o + +diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c +--- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 01:00:00.000000000 +0100 ++++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-io.c 2005-09-17 00:12:18.000000000 +0200 +@@ -0,0 +1,777 @@ ++//============================================================================= ++// ++// n2-io.c version 0.1.7 ++// Author: Karen Spearel ++// please report problems/bugs directly to the address above ++// ++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per ++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk ++// ++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, ++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT ++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER ++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. ++// ++//============================================================================= ++// GPIO Function State ++// 0 Red LED Status ++// 1 Green LED Ready = 1 ++// 2 Disk 2 LED On = 0 ++// 3 Disk 1 LED On = 0 ++// 4 Buzzer ++// 5 Power Button Pressed = 1 ++// 8 Power Down Output = 1 powers down N2 ++// 12 Reset Pressed = 0 ++//============================================================================= ++// this driver is N2 specific and is purposely designed to do the minimum ++// necessary to provide the necessary services given the limited memory resources ++// of the N2. As OpenN2 develops, addition features will be added as ++// suggested by the community. ++// ++//============================================================================= ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Set this to 1 to output lots of debug messages. */ ++#if NSLU2_IO_DEBUG ++#define nslu2_io_debug(args) printk args ++#else ++#define nslu2_io_debug(args) ((void)0) ++#endif ++ ++#define VERSION "0.1.7" ++ ++#define N2RB_MAJOR 60 //rbuttons ++#define N2PB_MAJOR 61 //pbuttons ++#define N2BZ_MAJOR 62 //buzzer ++#define N2LM_MAJOR 126 ++ ++#define N2PB_IRQ 22 //gpio5 ++#define N2RB_IRQ 29 //gpio12 ++ ++#define N2_BEEP_DUR_LONG 2000 ++#define N2_BEEP_DUR_MED 400 ++#define N2_BEEP_DUR_SHORT 100 ++#define N2_BEEP_PITCH_HIGH 250 ++#define N2_BEEP_PITCH_MED 500 ++#define N2_BEEP_PITCH_LOW 1000 ++#define N2_LONG_DELAY 30000 ++ ++#define N2_BZ_GPIO 4 ++#define N2_PB_GPIO 5 ++#define N2_PO_GPIO 8 //power off ++#define N2_RB_GPIO 12 ++ ++#define GPIO_BZ_BM 0x0010 //b0000 0000 0001 0000 ++#define GPIO_PB_BM 0x0020 //b0000 0000 0010 0000 ++#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 ++#define GPIO_RB_BM 0x1000 //b0001 0000 0000 0000 ++ ++#define NOERR 0 ++ ++#define RB_DELAY 50 ++#define PB_DELAY 20 ++ ++#define PWR_OFF_STR "poweroff" ++ ++ ++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe ++ ++#define N2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible ++#define N2BZ_BEEP _IO('M',1) //one beep at current defaults ++#define N2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults ++#define N2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 ++#define N2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies ++#define N2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies ++#define N2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever ++#define N2BZ_COMBINED _IOW('M',8,long) //combine all params in a long ++ ++#define N2LM_OFF _IOW('M',32,long) ++#define N2LM_ON _IOW('M',33,long) ++#define N2LM_BLINK _IOW('M',34,long) ++#define N2LM_ALT _IOW('M',35,long) ++#define N2LM_ALL_ON _IO('M',36) ++#define N2LM_ALL_OFF _IO('M',37) ++ ++#define PHYS_LEDS 4 ++#define BLINK_DELAY 25 ++ ++// OR Masks to turn these LEDs ON ++ ++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 ++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 ++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 ++ ++// AND Masks to turn these LEDs OFF ++ ++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 ++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 ++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 ++ ++// AND Masks to turn these LEDs ON ++ ++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ ++// Or Masks to turn these LEDs OFF ++ ++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++ ++// EOR masks for toggling LEDs on/off ++ ++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits ++#define RS_GRN_TGL 0x00000002 ++#define RS_RED_TGL 0x00000001 ++#define DISK1_TGL 0x00000008 ++#define DISK2_TGL 0x00000004 ++ ++// The LED names for switches ++ ++#define LED_RS_RED 0 ++#define LED_RS_GRN 1 ++#define LED_DISK1 2 ++#define LED_DISK2 3 ++#define LED_ALL 4 ++ ++static unsigned long init_jiffy = 0; //jiffies at init time ++static unsigned long rb_presses = 0; //number of reset button presses ++static unsigned long ontime = 50; ++static unsigned long offtime = 450; ++static unsigned long bz_repeatcnt = 10; ++static unsigned long tone = 1000; ++ ++DECLARE_WAIT_QUEUE_HEAD(n2rb_waitq); ++DECLARE_WAIT_QUEUE_HEAD(n2pb_waitq); ++ ++static struct timer_list n2lm_rsg_timer; //rs green ++static struct timer_list n2lm_rsr_timer; //rs red ++static struct timer_list n2lm_d1_timer; //drive 1 ++static struct timer_list n2lm_d2_timer; //drive 2 ++static struct timer_list n2rb_timer; ++static struct timer_list n2pb_timer; ++static struct timer_list n2bz_timer; //beeper ++ ++// sysfs class ++static struct class *n2lm_class; ++ ++//================================================================================================== ++// ++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the ++// GPIO output register is xor'd with a mask corresponding to the selected led which simply ++// flips that bit. No record of what any of the other leds is doing is needed. ++// ++//================================================================================================== ++// this blinks rs green or green/yellow if rs red is on ++static void n2lm_rsg_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout ++ add_timer(&n2lm_rsg_timer); //reinit timer ++ return; ++} ++ ++// this blinks or alternates rs red green... inited wit green on/red off ++static void n2lm_rsr_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ return; ++} ++// blinks disk 1 ++static void n2lm_d1_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ return; ++} ++// blinks disk 2 ++static void n2lm_d2_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_start(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); ++ ++ switch(led) { ++ case LED_RS_RED: ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ break; ++ ++ case LED_RS_GRN: ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsg_timer); ++ break; ++ ++ case LED_DISK1: ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ break; ++ ++ case LED_DISK2: ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ break; ++ ++ default: ++ break; ++ } ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_stop(unsigned long led) ++{ ++ switch (led) { ++ case LED_RS_RED: ++ del_timer(&n2lm_rsr_timer); ++ break; ++ case LED_RS_GRN: ++ del_timer(&n2lm_rsg_timer); ++ break; ++ case LED_DISK1: ++ del_timer(&n2lm_d1_timer); ++ break; ++ case LED_DISK2: ++ del_timer(&n2lm_d2_timer); ++ break; ++ default: ++ break; ++ } ++ return; ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_timer_stop_all(void) ++{ ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ return; ++} ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledon(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb ++ return; ++ case LED_ALL: //all green ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; ++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); ++ return; ++ } ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledoff(unsigned long led) ++{ ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 ++ return; ++ case LED_ALL: ++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); ++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); ++ } ++} ++ ++//================================================================================================== ++ ++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); ++ ++ if (led < 0 || led >= PHYS_LEDS) ++ return -EINVAL; ++ ++ switch (cmd ) { ++ case N2LM_ON: ++ n2lm_timer_stop(led); ++ n2lm_ledon(led); ++ break; ++ ++ case N2LM_OFF: ++ n2lm_timer_stop(led); ++ n2lm_ledoff(led); ++ break; ++ ++ case N2LM_BLINK: ++ n2lm_ledon(led); ++ if (led == LED_RS_RED) ++ n2lm_rsr_timer.data = RS_RED_TGL; ++ n2lm_timer_start(led); ++ break; ++ ++ case N2LM_ALT: ++ if (led == LED_RS_RED) ++ { ++ n2lm_ledon(LED_RS_GRN); ++ n2lm_ledoff(LED_RS_RED); ++ n2lm_rsr_timer.data = RS_RG_ALT; ++ n2lm_timer_start(LED_RS_RED); ++ break; ++ } else ++ return -EINVAL; ++ ++ case N2LM_ALL_ON: ++ n2lm_timer_stop_all(); ++ n2lm_ledon(LED_ALL); ++ break; ++ ++ case N2LM_ALL_OFF: ++ n2lm_timer_stop_all(); ++ n2lm_ledoff(LED_ALL); ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return NOERR; ++} ++ ++static struct file_operations n2lm_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2lm_ioctl, ++}; ++//================================================================================================== ++// We can't do anything fancy here since the system tick rate is far below that required to ++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until ++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing ++// important should be haprepening. ++//================================================================================================== ++ ++static void n2_buzz(int tone_delay, int duration) ++{ ++ int i; ++ ++ *IXP4XX_GPIO_GPOER &= ~GPIO_BZ_BM; ++ ++ for (i = 1; i < duration; i++) { ++ *IXP4XX_GPIO_GPOUTR &= ~GPIO_BZ_BM; ++ udelay(tone_delay); ++ *IXP4XX_GPIO_GPOUTR |= GPIO_BZ_BM; ++ udelay(tone_delay); ++ } ++ *IXP4XX_GPIO_GPOER |= GPIO_BZ_BM; ++ ++ return; ++} ++//================================================================================================= ++ ++// this handles the buzzer duty cycle ++static void n2bz_handler(unsigned long data) ++{ ++ if (--bz_repeatcnt > 0) { //if just one beep left to do ++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout ++ add_timer(&n2bz_timer); //reinit timer ++ } ++ n2_buzz(tone/2, ontime); ++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); ++ return; ++} ++ ++//================================================================================================== ++ ++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) ++{ ++ switch (cmd) { ++ case N2BZ_BEEP: ++ n2_buzz(tone/2, ontime); ++ break; ++ ++ case N2BZ_BEEP_STOP: ++ del_timer(&n2bz_timer); ++ break; ++ ++ case N2BZ_BEEPS: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ n2bz_handler(0); ++ break; ++ ++ case N2BZ_TONESET: ++ if (param >= 250 && param <= 2000) ++ tone = param; ++ break; ++ ++ case N2BZ_ONTIME: ++ if (param > 4 && param < 201) ++ ontime = param; ++ break; ++ ++ case N2BZ_SILENTTIME: ++ if (param > ontime) //enforce a reasonable duty cycle ++ offtime = param; ++ else ++ offtime = ontime; ++ break; ++ ++ case N2BZ_REPEATCNT: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ break; ++ ++ case N2BZ_COMBINED: ++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 ++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies ++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies ++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 ++ break; ++ ++ default: ++ break; ++ } ++ return NOERR; ++} ++ ++static struct file_operations n2bz_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2bz_ioctl, ++}; ++ ++//================================================================================================== ++ ++static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) ++{ ++ void *ret; ++ ++ wake_up(&n2pb_waitq); ++ remove_proc_entry(PWR_OFF_STR, NULL); //no parent ++ n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); ++ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); ++ nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); ++ ++// WARNING: This is RUDE...it unconditionally pulls the power plug. ++// Your data will be at risk...since this is just a test system ++// I am leaving it enabled...eventually userland needs to get the ++// message, do an orderly shutdown and use an ioctl or something in ++// /proc/powerdowm to actually have us pull the plug. ++ ++ machine_power_off(); ++ ++ return IRQ_HANDLED; ++} ++ ++//================================================================================================== ++// ++//static void do_rb_timeout(unsigned long data) ++//{ ++// int i; ++// ++// for (i = 0; i < rb_presses; i++) ++// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); ++// return; ++//} ++// ++//================================================================================================== ++// does nothing -- waiting for userland to define ++// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so ++// we hang in a loop until the button is no longer pressed ++ ++struct testr { ++ int ctl; ++ long param; ++}; ++ ++static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) ++{ ++ ++ static struct testr test[] = { ++ { N2LM_ALL_OFF,0 }, ++ { N2LM_ON,0 }, ++ { N2LM_OFF,0 }, ++ { N2LM_ON,1 }, ++ { N2LM_ALL_OFF,1 }, ++ { N2LM_ON,2 }, ++ { N2LM_OFF,2 }, ++ { N2LM_ON,3 }, ++ { N2LM_OFF,3 }, ++ { N2LM_BLINK,0 }, ++ { N2LM_OFF,0 }, ++ { N2LM_BLINK,1 }, ++ { N2LM_OFF,1 }, ++ { N2LM_BLINK,2 }, ++ { N2LM_OFF,2 }, ++ { N2LM_BLINK,3 }, ++ { N2LM_OFF,3 }, ++ { N2LM_ALL_OFF,0 }, ++ { N2LM_ALT,1 }, ++ { N2LM_OFF,1 }, ++ { N2LM_ALL_ON,0 } ++ }; ++ ++ nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); ++ ++ wake_up(&n2rb_waitq); ++ while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) ++ ; //wait for button release ++ ++ if (rb_presses > 20) ++ rb_presses = 0; ++ tone = (rb_presses * 50) + 200; ++ ontime = (rb_presses*10) + 100; ++ offtime = 500 - (rb_presses*20); ++ nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); ++ rb_presses++; ++ ++ n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); ++ n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); ++// if (rb_presses == 0) { ++// init_jiffy = jiffies; ++// init_timer (&n2rb_timer); ++// n2rb_timer.function = do_rb_timeout; ++// }; ++// ++// if (rb_presses == 8) ++// rb_presses = 0; ++// if (rb_presses & 1) ++// n2lm_ledon(test[rb_presses]); ++// else ++// n2lm_ledoff(test[rb_presses]); ++// ++// n2rb_timer.expires = (jiffies + RB_DELAY); ++// add_timer (&n2rb_timer); ++// if (rb_presses < 5) { ++// if (rb_presses > 0) ++// n2lm_ledoff(rb_presses); ++// n2lm_ledon(++rb_presses); ++// n2lm_timer_start(rb_presses); ++// }; ++ ++ nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); ++ return IRQ_HANDLED; ++ ++} ++ ++//================================================================================================== ++// What to do here is majorly undetermined... ++ ++static int n2rb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) ++{ ++ printk(KERN_DEBUG "Reset Button Wait\n"); ++ interruptible_sleep_on(&n2rb_waitq); ++ return copy_to_user(buffer, "reset", 5) ? -EFAULT : 5; ++ ++} ++ ++//================================================================================================== ++// What to do here is majorly undetermined... ++ ++static int n2pb_read (struct file *filp, char __user *buffer, size_t count, loff_t *ppos) ++{ ++ printk(KERN_DEBUG "Power Button Wait\n"); ++ interruptible_sleep_on(&n2pb_waitq); ++ return copy_to_user(buffer, "poweroff", 8) ? -EFAULT : 8; ++ ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static struct file_operations n2rb_fops = { ++ .owner = THIS_MODULE, ++ .read = n2rb_read, ++}; ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static struct file_operations n2pb_fops = { ++ .owner = THIS_MODULE, ++ .read = n2pb_read, ++}; ++ ++//================================================================================================== ++ ++static void n2iom_initarch(void) ++{ ++ printk(KERN_DEBUG "setup_interrupts - jiffies=%ld init_jiffy=%ld\n", jiffies, init_jiffy); ++ ++ *IXP4XX_GPIO_GPISR = 0x20400000; // read the 2 irqs to clr ++ gpio_line_config(N2_RB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); ++ gpio_line_isr_clear(N2_RB_GPIO); ++ gpio_line_config(N2_PB_GPIO, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_HIGH); ++ gpio_line_isr_clear(N2_PB_GPIO); ++ ++ init_timer(&n2lm_rsg_timer); ++ init_timer(&n2lm_rsr_timer); ++ init_timer(&n2lm_d1_timer); ++ init_timer(&n2lm_d2_timer); ++// init_timer(&n2rb_timer); ++// init_timer(&n2pb_timer); ++ init_timer(&n2bz_timer); ++ n2lm_rsr_timer.function = n2lm_rsr_handler; ++ n2lm_rsg_timer.function = n2lm_rsg_handler; ++ n2lm_d2_timer.function = n2lm_d2_handler; ++ n2lm_d1_timer.function = n2lm_d1_handler; ++ n2bz_timer.function = n2bz_handler; ++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; ++ ++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 ++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds ++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; ++ n2lm_ledon(LED_ALL); ++ n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_SHORT); ++ n2lm_ledoff(LED_ALL); ++// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit ++ n2lm_ledon(LED_RS_RED); ++ ++ return; ++} ++ ++//================================================================================================== ++ ++static int __init n2iom_init(void) ++{ ++ printk(KERN_INFO "OpenN2 Misc I/O Driver Version %s\n", VERSION); ++ ++ init_jiffy = jiffies; ++ printk(KERN_DEBUG "init_jiffy=%ld\n",init_jiffy); ++ n2iom_initarch(); ++ ++ n2lm_class = class_create(THIS_MODULE, "nslu2"); ++ ++ if (register_chrdev(N2RB_MAJOR, "n2_rbm", &n2pb_fops) < NOERR) { ++ printk(KERN_DEBUG "Reset Button Major %d not available\n", N2RB_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(N2RB_MAJOR, 0), NULL, "rbuttons"); ++ } ++ if (register_chrdev(N2PB_MAJOR, "n2_pbm", &n2rb_fops) < NOERR) { ++ printk(KERN_DEBUG "Power Button Major %d not available\n", N2PB_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(N2PB_MAJOR, 0), NULL, "pbuttons"); ++ } ++ if (register_chrdev(N2LM_MAJOR, "n2_ledm", &n2lm_fops) < NOERR) { ++ printk(KERN_DEBUG "Led Manager Major %d not available\n", N2LM_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(N2LM_MAJOR, 0), NULL, "leds"); ++ } ++ if (register_chrdev(N2BZ_MAJOR, "n2_bzm", &n2bz_fops) < NOERR) { ++ printk(KERN_DEBUG "Buzzer Major %d not available\n", N2BZ_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(N2BZ_MAJOR, 0), NULL, "buzzer"); ++ } ++ ++ if (request_irq(N2RB_IRQ, &n2rb_handler, SA_INTERRUPT, "n2_rb", NULL) < NOERR) { ++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", N2RB_IRQ); ++ return -EIO; ++ } ++ if (request_irq(N2PB_IRQ, &n2pb_handler, SA_INTERRUPT, "n2_pb", NULL) < NOERR) { ++ printk(KERN_DEBUG "Power Button IRQ %d not available\n", N2PB_IRQ); ++ return -EIO; ++ } ++ ++ enable_irq(N2PB_IRQ); ++ enable_irq(N2RB_IRQ); ++ return (NOERR); ++} ++ ++//================================================================================================== ++ ++static void __exit n2iom_exit(void) ++{ ++ remove_proc_entry(PWR_OFF_STR, NULL); ++ del_timer(&n2rb_timer); ++ free_irq(N2RB_IRQ,NULL); ++ unregister_chrdev(N2PB_MAJOR, "n2pb"); ++ class_device_destroy(n2lm_class, MKDEV(N2PB_MAJOR, 0)); ++ del_timer(&n2pb_timer); ++ free_irq(N2PB_IRQ, NULL); ++ unregister_chrdev(N2RB_MAJOR, "n2rb" ); ++ class_device_destroy(n2lm_class, MKDEV(N2RB_MAJOR, 0)); ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ unregister_chrdev(N2LM_MAJOR, "n2lm" ); ++ class_device_destroy(n2lm_class, MKDEV(N2LM_MAJOR, 0)); ++ unregister_chrdev(N2BZ_MAJOR, "n2bz"); ++ class_device_destroy(n2lm_class, MKDEV(N2BZ_MAJOR, 0)); ++ class_destroy(n2lm_class); ++} ++ ++module_init (n2iom_init); ++module_exit (n2iom_exit); ++ ++MODULE_AUTHOR("Karen Spearel "); ++MODULE_DESCRIPTION("OpenN2 Buttons/LEDs IO Driver"); ++MODULE_LICENSE("GPL"); ++static int debug = 7; ++module_param(debug, int, 0644); ++MODULE_PARM_DESC(debug, "Debugging enabled = 8"); ++ +diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c +--- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c 1970-01-01 01:00:00.000000000 +0100 ++++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-part.c 2005-09-16 22:44:38.000000000 +0200 +@@ -0,0 +1,120 @@ ++/* ++ * nslu2-part.c ++ * ++ * Maintainers: http://www.nslu2-linux.org/ ++ * Initial port: Mark Rakes ++ * ++ * "Parse" the fixed partition table of the Linksys NSLU2 and ++ * produce a Linux partition array to match. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* info we know about the NSLU2's flash setup: ++ * ++ * Num Partition offset size ++ * --- --------- ---------- ----------- ++ * 0 RedBoot 0x00000000 0x00040000 ++ * 1 System Configuration 0x00040000 0x00020000 ++ * 2 Kernel 0x00060000 0x00100000 ++ * 3 Ramdisk 0x00160000 0x006a0000 ++ */ ++ #define NSLU2_NUM_FLASH_PARTITIONS 4 ++ #define NSLU2_FLASH_PART0_NAME "RedBoot" ++ #define NSLU2_FLASH_PART0_OFFSET 0x00000000 ++ #define NSLU2_FLASH_PART0_SIZE 0x00040000 ++ #define NSLU2_FLASH_PART1_NAME "System Configuration" ++ #define NSLU2_FLASH_PART1_OFFSET (NSLU2_FLASH_PART0_OFFSET + NSLU2_FLASH_PART0_SIZE) ++ #define NSLU2_FLASH_PART1_SIZE 0x00020000 ++ #define NSLU2_FLASH_PART2_NAME "Kernel" ++ #define NSLU2_FLASH_PART2_OFFSET (NSLU2_FLASH_PART1_OFFSET + NSLU2_FLASH_PART1_SIZE) ++ #define NSLU2_FLASH_PART2_SIZE 0x00100000 ++ #define NSLU2_FLASH_PART3_NAME "Ramdisk" ++ #define NSLU2_FLASH_PART3_OFFSET (NSLU2_FLASH_PART2_OFFSET + NSLU2_FLASH_PART2_SIZE) ++ #define NSLU2_FLASH_PART3_SIZE 0x006a0000 ++ ++static int parse_nslu2_partitions(struct mtd_info *master, ++ struct mtd_partition **pparts, ++ unsigned long flash_start) ++{ ++ struct mtd_partition *parts; ++ int ret = 0, namelen = 0; ++ char *names; ++ ++ namelen = strlen(NSLU2_FLASH_PART0_NAME) + ++ strlen(NSLU2_FLASH_PART1_NAME) + ++ strlen(NSLU2_FLASH_PART2_NAME) + ++ strlen(NSLU2_FLASH_PART3_NAME) + ++ NSLU2_NUM_FLASH_PARTITIONS; /*4 strings + each terminator */ ++ ++ parts = kmalloc(sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen, GFP_KERNEL); ++ if (!parts) { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ memset(parts, 0, sizeof(*parts)*NSLU2_NUM_FLASH_PARTITIONS + namelen); ++ names = (char *)&parts[NSLU2_NUM_FLASH_PARTITIONS]; ++ ++ /* RedBoot partition */ ++ parts[0].size = NSLU2_FLASH_PART0_SIZE; ++ parts[0].offset = NSLU2_FLASH_PART0_OFFSET; ++ parts[0].name = NSLU2_FLASH_PART0_NAME; ++ parts[0].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART0_NAME); ++ names += strlen(names)+1; ++ /* System Configuration */ ++ parts[1].size = NSLU2_FLASH_PART1_SIZE; ++ parts[1].offset = NSLU2_FLASH_PART1_OFFSET; ++ parts[1].name = NSLU2_FLASH_PART1_NAME; ++ parts[1].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART1_NAME); ++ names += strlen(names)+1; ++ /* Kernel */ ++ parts[2].size = NSLU2_FLASH_PART2_SIZE; ++ parts[2].offset = NSLU2_FLASH_PART2_OFFSET; ++ parts[2].name = NSLU2_FLASH_PART2_NAME; ++ parts[2].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART2_NAME); ++ names += strlen(names)+1; ++ /* Ramdisk */ ++ parts[3].size = NSLU2_FLASH_PART3_SIZE; ++ parts[3].offset = NSLU2_FLASH_PART3_OFFSET; ++ parts[3].name = NSLU2_FLASH_PART3_NAME; ++ parts[3].mask_flags = MTD_WRITEABLE; /* readonly */ ++ strcpy(names, NSLU2_FLASH_PART3_NAME); ++ names += strlen(names)+1; ++ ++ ret = NSLU2_NUM_FLASH_PARTITIONS; ++ *pparts = parts; ++ out: ++ return ret; ++} ++ ++static struct mtd_part_parser nslu2_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_nslu2_partitions, ++ .name = "NSLU2", ++}; ++ ++static int __init nslu2_parser_init(void) ++{ ++ return register_mtd_parser(&nslu2_parser); ++} ++ ++static void __exit nslu2_parser_exit(void) ++{ ++ deregister_mtd_parser(&nslu2_parser); ++} ++ ++module_init(nslu2_parser_init); ++module_exit(nslu2_parser_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mark Rakes"); ++MODULE_DESCRIPTION("Parsing code for NSLU2 flash tables"); +diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c +--- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-pci.c 2005-09-16 22:43:54.000000000 +0200 +@@ -0,0 +1,87 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-pci.c ++ * ++ * NSLU2 board-level PCI initialization ++ * ++ * based on ixdp425-pci.c: ++ * Copyright (C) 2002 Intel Corporation. ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Maintainer: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++// GPIO 8 is used as the power input so is not free for use as a PCI IRQ ++// However, all the common PCI setup code presumes the standard 4 PCI ++// interrupts are available. So we compromise...we don't enable the ++// IRQ on Pin 8 but we let ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++void __init nslu2_pci_preinit(void) ++{ ++ gpio_line_config(NSLU2_PCI_INTA_PIN, ++ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); ++ gpio_line_config(NSLU2_PCI_INTB_PIN, ++ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); ++ gpio_line_config(NSLU2_PCI_INTC_PIN, ++ IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); ++// gpio_line_config(NSLU2_PCI_INTD_PIN, ++// IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); ++ ++ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN); ++ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN); ++// gpio_line_isr_clear(NSLU2_PCI_INTD_PIN); ++ ++ ixp4xx_pci_preinit(); ++} ++ ++static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { ++ IRQ_NSLU2_PCI_INTA, ++ IRQ_NSLU2_PCI_INTB, ++ IRQ_NSLU2_PCI_INTC, ++// IRQ_NSLU2_PCI_INTD ++ }; ++ ++ int irq = -1; ++ ++ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && ++ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { ++ irq = pci_irq_table[(slot + pin - 2) % 3]; // ! % 4 kas11 ++ } ++ ++ return irq; ++} ++ ++struct hw_pci __initdata nslu2_pci = { ++ .nr_controllers = 1, ++ .preinit = nslu2_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = nslu2_map_irq, ++}; ++ ++int __init nslu2_pci_init(void) //monkey see, monkey do ++{ ++ if (machine_is_nslu2()) ++ pci_common_init(&nslu2_pci); ++ return 0; ++} ++ ++subsys_initcall(nslu2_pci_init); ++ +diff -urN linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c +--- linux-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ nslu2-2.6.13.1/arch/arm/mach-ixp4xx/nslu2-setup.c 2005-09-17 00:02:40.000000000 +0200 +@@ -0,0 +1,147 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-setup.c ++ * ++ * NSLU2 board-setup ++ * ++ * based ixdp425-setup.c: ++ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * ++ * Author: Mark Rakes ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * Fixed missing init_time in MACHINE_START kas11 10/22/04 ++ * Changed to conform to new style __init ixdp425 kas11 10/22/04 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++void __init nslu2_map_io(void) ++{ ++ ixp4xx_map_io(); ++} ++ ++static struct flash_platform_data nslu2_flash_data = { ++ .map_name = "cfi_probe", ++ .width = 2, ++}; ++ ++static struct resource nslu2_flash_resource = { ++ .start = NSLU2_FLASH_BASE, ++ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device nslu2_flash = { ++ .name = "IXP4XX-Flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &nslu2_flash_data, ++ }, ++ .num_resources = 1, ++ .resource = &nslu2_flash_resource, ++}; ++ ++static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { ++ .sda_pin = NSLU2_SDA_PIN, ++ .scl_pin = NSLU2_SCL_PIN, ++}; ++ ++static struct platform_device nslu2_i2c_controller = { ++ .name = "IXP4XX-I2C", ++ .id = 0, ++ .dev = { ++ .platform_data = &nslu2_i2c_gpio_pins, ++ }, ++ .num_resources = 0 ++}; ++ ++static struct resource nslu2_uart_resources[] = { ++ { ++ .start = IXP4XX_UART1_BASE_PHYS, ++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM ++ }, ++ { ++ .start = IXP4XX_UART2_BASE_PHYS, ++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, ++ .flags = IORESOURCE_MEM ++ } ++}; ++ ++static struct plat_serial8250_port nslu2_uart_data[] = { ++ { ++ .mapbase = IXP4XX_UART1_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART1, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ }, ++ { ++ .mapbase = IXP4XX_UART2_BASE_PHYS, ++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, ++ .irq = IRQ_IXP4XX_UART2, ++ .flags = UPF_BOOT_AUTOCONF, ++ .iotype = UPIO_MEM, ++ .regshift = 2, ++ .uartclk = IXP4XX_UART_XTAL, ++ } ++}; ++ ++static struct platform_device nslu2_uart = { ++ .name = "serial8250", ++ .id = 0, ++ .dev.platform_data = nslu2_uart_data, ++ .num_resources = 2, ++ .resource = nslu2_uart_resources ++}; ++ ++static struct platform_device *nslu2_devices[] __initdata = { ++ &nslu2_i2c_controller, ++ &nslu2_flash, ++ &nslu2_uart ++}; ++ ++static void n2_power_off(void) ++{ ++ /* This causes the box to drop the power and go dead. */ ++#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000 ++ *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio ++ *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed ++} ++ ++static void __init nslu2_init(void) ++{ ++ ixp4xx_sys_init(); ++ ++ pm_power_off = n2_power_off; ++ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); ++} ++ ++MACHINE_START(NSLU2, "Linksys NSLU2") ++ /* Maintainer: www.nslu2-linux.org */ ++ .phys_ram = PHYS_OFFSET, ++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, ++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, ++ .boot_params = 0x00000100, ++ .map_io = nslu2_map_io, ++ .init_irq = ixp4xx_init_irq, //FIXME: all irq are off here ++ .timer = &ixp4xx_timer, ++ .init_machine = nslu2_init, ++ // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed? ++MACHINE_END diff --git a/packages/linux/nslu2-kernel/2.6/55-nslu2-rpbutton.patch b/packages/linux/nslu2-kernel/2.6/55-nslu2-rpbutton.patch new file mode 100644 index 0000000000..b5ce101d68 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/55-nslu2-rpbutton.patch @@ -0,0 +1,139 @@ +--- nslu2-io.c.old 2da1d3f5c0aa0804c5769588337077ddcb35c5e9 ++++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c e895da638b4aae16a11fafe52ae0b063645a9a12 +@@ -158,6 +158,8 @@ + #define LED_DISK2 3 + #define LED_ALL 4 + ++static int nslu2_shutdown_in_progress = 0; ++ + static unsigned long init_jiffy = 0; //jiffies at init time + static unsigned long rb_presses = 0; //number of reset button presses + static unsigned long ontime = 50; +@@ -503,40 +505,20 @@ + static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs) + { + void *ret; +- +- wake_up(&n2pb_waitq); +- remove_proc_entry(PWR_OFF_STR, NULL); //no parent +- n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED); +- ret = create_proc_entry(PWR_OFF_STR, 0, NULL); +- nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret)); +- +-// WARNING: This is RUDE...it unconditionally pulls the power plug. +-// Your data will be at risk...since this is just a test system +-// I am leaving it enabled...eventually userland needs to get the +-// message, do an orderly shutdown and use an ioctl or something in +-// /proc/powerdowm to actually have us pull the plug. +- +- machine_power_off(); +- ++ if (!nslu2_shutdown_in_progress++) { ++ wake_up(&n2pb_waitq); ++ remove_proc_entry(PWR_OFF_STR, NULL); //no parent ++ n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK" ++ ret = create_proc_entry(PWR_OFF_STR, 0, NULL); ++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret)); ++ kill_proc(1,SIGINT,1); // Signal init to shut down ++ } else { ++ n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED); // Make a scary noise! ++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine! ++ } + return IRQ_HANDLED; + } + +-//================================================================================================== +-// +-//static void do_rb_timeout(unsigned long data) +-//{ +-// int i; +-// +-// for (i = 0; i < rb_presses; i++) +-// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT); +-// return; +-//} +-// +-//================================================================================================== +-// does nothing -- waiting for userland to define +-// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so +-// we hang in a loop until the button is no longer pressed +- + struct testr { + int ctl; + long param; +@@ -544,72 +526,11 @@ + + static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs) + { ++// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable + +- static struct testr test[] = { +- { N2LM_ALL_OFF,0 }, +- { N2LM_ON,0 }, +- { N2LM_OFF,0 }, +- { N2LM_ON,1 }, +- { N2LM_ALL_OFF,1 }, +- { N2LM_ON,2 }, +- { N2LM_OFF,2 }, +- { N2LM_ON,3 }, +- { N2LM_OFF,3 }, +- { N2LM_BLINK,0 }, +- { N2LM_OFF,0 }, +- { N2LM_BLINK,1 }, +- { N2LM_OFF,1 }, +- { N2LM_BLINK,2 }, +- { N2LM_OFF,2 }, +- { N2LM_BLINK,3 }, +- { N2LM_OFF,3 }, +- { N2LM_ALL_OFF,0 }, +- { N2LM_ALT,1 }, +- { N2LM_OFF,1 }, +- { N2LM_ALL_ON,0 } +- }; +- +- nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long))); +- + wake_up(&n2rb_waitq); +- while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0) +- ; //wait for button release +- +- if (rb_presses > 20) +- rb_presses = 0; +- tone = (rb_presses * 50) + 200; +- ontime = (rb_presses*10) + 100; +- offtime = 500 - (rb_presses*20); +- nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone)); +- rb_presses++; +- +- n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses); +- n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param); +-// if (rb_presses == 0) { +-// init_jiffy = jiffies; +-// init_timer (&n2rb_timer); +-// n2rb_timer.function = do_rb_timeout; +-// }; +-// +-// if (rb_presses == 8) +-// rb_presses = 0; +-// if (rb_presses & 1) +-// n2lm_ledon(test[rb_presses]); +-// else +-// n2lm_ledoff(test[rb_presses]); +-// +-// n2rb_timer.expires = (jiffies + RB_DELAY); +-// add_timer (&n2rb_timer); +-// if (rb_presses < 5) { +-// if (rb_presses > 0) +-// n2lm_ledoff(rb_presses); +-// n2lm_ledon(++rb_presses); +-// n2lm_timer_start(rb_presses); +-// }; +- +- nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies)); +- return IRQ_HANDLED; +- ++ machine_power_off(); ++ return IRQ_HANDLED; // So we don't get a nobody cared error :-P + } + + //================================================================================================== diff --git a/packages/linux/nslu2-kernel/2.6/70-xscale-reset.patch b/packages/linux/nslu2-kernel/2.6/70-xscale-reset.patch new file mode 100644 index 0000000000..4e68456e20 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/70-xscale-reset.patch @@ -0,0 +1,155 @@ +--- linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-03-09 00:12:44.000000000 -0800 ++++ linux-2.6.11.2/arch/arm/mm/proc-xscale.S 2005-06-18 15:39:22.701222319 -0700 +@@ -137,23 +137,129 @@ + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * ++ * This code is ixp425 specific with respect to the reset of ++ * the 'configuration register' - to be found at address ++ * 0xC40000020 'IXP425_EXP_CNFGO' ++ * + * loc: location to jump to for soft reset + */ + .align 5 + ENTRY(cpu_xscale_reset) ++ @ always branch to 0 ++ mov r0, #0 ++ ++ @ disable both FIQ and IRQ, put us into 32 bit ++ @ SVC mode (no thumb). + mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r1 @ reset CPSR +- mrc p15, 0, r1, c1, c0, 0 @ ctrl register +- bic r1, r1, #0x0086 @ ........B....CA. +- bic r1, r1, #0x3900 @ ..VIZ..S........ +- mcr p15, 0, r1, c1, c0, 0 @ ctrl register +- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB +- bic r1, r1, #0x0001 @ ...............M +- mcr p15, 0, r1, c1, c0, 0 @ ctrl register +- @ CAUTION: MMU turned off from this point. We count on the pipeline +- @ already containing those two last instructions to survive. ++ ++ @ disable debug, clock and power registers are ++ @ unimplemented. ++ mcr p14, 0, r0, c10, c0, 0 @ disable debug ++ ++ @ disable the performance monitor ++ mcr p14, 0, r0, c0, c1, 0 @ PMNC (ctrl reg) ++ mcr p14, 0, r0, c4, c1, 0 @ INTEN (intrpt enable) ++ ++ @ wait for p14 to complete ++ mrc p14, 0, ip, c4, c1, 0 @ arbitrary read ++ mov ip, ip @ sync ++ ++ @ clear the PID register ++ mcr p15, 0, r0, c13, c0, 0 @ OR nothing with address! ++ ++ @ unlock the TLBs and the I/D cache locks ++ mcr p15, 0, r0, c10, c8, 1 @ data TLB unlocked ++ mcr p15, 0, r0, c10, c4, 1 @ instruction TLB unlocked ++ mcr p15, 0, r0, c9, c2, 1 @ unlock data cache ++ mcr p15, 0, r0, c9, c1, 1 @ unlock instruction cache ++ ++ @ zap the minidata cache to write through with write coalescing ++ @ disabled. ++ mov r1, #0x21 @ MD=b10, K=1 ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ++ mrc p15, 0, ip, c1, c0, 0 @ read of ctrl register ++ mov ip, ip @ sync ++ mcr p15, 0, r1, c1, c0, 1 @ write through, no coalesc ++ ++ @ set the control register, the MMU is enabled but everything else ++ @ is disabled at this point, r1 contains the control register flags ++ @ the process is now in little-endian mode (no matter, we aren't ++ @ going to do any + #include + #include +- ++#include + #include + + #include + +-#ifndef __ARMEB__ ++#if !defined(__ARMEB__) && !defined(CONFIG_ARCH_NSLU2) + #define BYTE0(h) ((h) & 0xFF) + #define BYTE1(h) (((h) >> 8) & 0xFF) + #else +@@ -44,6 +44,10 @@ + static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) + { + map_word val; ++ ++#ifndef __ARMEB__ ++ ofs ^= 2; ++#endif + val.x[0] = *(__u16 *) (map->map_priv_1 + ofs); + return val; + } +@@ -53,6 +57,21 @@ static map_word ixp4xx_read16(struct map + * when attached to a 16-bit wide device (such as the 28F128J3A), + * so we can't just memcpy_fromio(). + */ ++ ++#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS) ++struct fis_image_desc { ++ unsigned char name[16]; // Null terminated name ++ unsigned long flash_base; // Address within FLASH of image ++ unsigned long mem_base; // Address in memory where it executes ++ unsigned long size; // Length of image ++ unsigned long entry_point; // Execution entry point ++ unsigned long data_length; // Length of actual data ++ unsigned char _pad[256-(16+7*sizeof(unsigned long))]; ++ unsigned long desc_cksum; // Checksum over image descriptor ++ unsigned long file_cksum; // Checksum over image data ++}; ++#endif ++ + static void ixp4xx_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) + { +@@ -62,13 +81,34 @@ static void ixp4xx_copy_from(struct map_ + u16 data; + + for (i = 0; i < (len / 2); i++) { +- data = get_unaligned((u16*)(src + i)); ++ int j = i; ++#ifndef __ARMEB__ ++ j ^= 1; ++#endif ++ data = get_unaligned((u16*)(src + j)); + dest[i * 2] = BYTE0(data); + dest[i * 2 + 1] = BYTE1(data); + } + ++#ifndef __ARMEB__ ++ i ^= 1; ++#endif ++ + if (len & 1) + dest[len - 1] = BYTE0(get_unaligned((u16*)(src + i))); ++ ++ /* Hack: Last sector contains RedBoot FIS table in big-endian format. ++ Convert into little endian format so we can use RedBoot parser */ ++#if !defined(__ARMEB__) && defined(CONFIG_MTD_REDBOOT_PARTS) ++ if (from == 0x7e0000) { ++ struct fis_image_desc *desc = (struct fis_image_desc *)to; ++ for (i=0; i < (len/sizeof(struct fis_image_desc)); i++) { ++ desc[i].flash_base = be32_to_cpu(desc[i].flash_base); ++ desc[i].mem_base = be32_to_cpu(desc[i].mem_base); ++ desc[i].size = be32_to_cpu(desc[i].size); ++ } ++ } ++#endif + } + + /* +@@ -77,6 +117,9 @@ static void ixp4xx_copy_from(struct map_ + */ + static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) + { ++#ifndef __ARMEB__ ++ adr ^= 2; ++#endif + if (!(adr & 1)) + *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; + } +@@ -86,6 +129,9 @@ static void ixp4xx_probe_write16(struct + */ + static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) + { ++#ifndef __ARMEB__ ++ adr ^= 2; ++#endif + *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; + } + diff --git a/packages/linux/nslu2-kernel/2.6/95-nslu2-defconfig.patch b/packages/linux/nslu2-kernel/2.6/95-nslu2-defconfig.patch new file mode 100644 index 0000000000..f86830d82b --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/95-nslu2-defconfig.patch @@ -0,0 +1,1442 @@ +diff -urN linux-2.6.13.1/arch/arm/configs/nslu2_defconfig nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig +--- linux-2.6.13.1/arch/arm/configs/nslu2_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig 2005-09-17 16:45:43.000000000 +0200 +@@ -0,0 +1,1438 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.13.1 ++# Sat Sep 17 16:45:18 2005 ++# ++CONFIG_ARM=y ++CONFIG_MMU=y ++CONFIG_UID16=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_CLEAN_COMPILE=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_POSIX_MQUEUE is not set ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++CONFIG_SYSCTL=y ++# CONFIG_AUDIT is not set ++CONFIG_HOTPLUG=y ++CONFIG_KOBJECT_UEVENT=y ++# CONFIG_IKCONFIG is not set ++CONFIG_EMBEDDED=y ++# CONFIG_KALLSYMS is not set ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SHMEM=y ++CONFIG_CC_ALIGN_FUNCTIONS=0 ++CONFIG_CC_ALIGN_LABELS=0 ++CONFIG_CC_ALIGN_LOOPS=0 ++CONFIG_CC_ALIGN_JUMPS=0 ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_OBSOLETE_MODPARM=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++ ++# ++# System Type ++# ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_CAMELOT is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_IOP3XX is not set ++CONFIG_ARCH_IXP4XX=y ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_OMAP is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_AAEC2000 is not set ++CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y ++ ++# ++# Intel IXP4xx Implementation Options ++# ++ ++# ++# IXP4xx Platforms ++# ++# CONFIG_ARCH_AVILA is not set ++# CONFIG_ARCH_ADI_COYOTE is not set ++# CONFIG_ARCH_IXDP425 is not set ++# CONFIG_MACH_IXDPG425 is not set ++# CONFIG_MACH_IXDP465 is not set ++CONFIG_ARCH_NSLU2=y ++# CONFIG_ARCH_PRPMC1100 is not set ++# CONFIG_MACH_GTWX5715 is not set ++ ++# ++# IXP4xx Options ++# ++CONFIG_IXP4XX_INDIRECT_PCI=y ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_XSCALE=y ++CONFIG_CPU_32v5=y ++CONFIG_CPU_ABRT_EV5T=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_TLB_V4WBI=y ++ ++# ++# Processor Features ++# ++# CONFIG_ARM_THUMB is not set ++CONFIG_CPU_BIG_ENDIAN=y ++CONFIG_XSCALE_PMU=y ++CONFIG_DMABOUNCE=y ++ ++# ++# Bus support ++# ++CONFIG_ISA_DMA_API=y ++CONFIG_PCI=y ++CONFIG_PCI_LEGACY_PROC=y ++# CONFIG_PCI_NAMES is not set ++# CONFIG_PCI_DEBUG is not set ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++# CONFIG_PREEMPT is not set ++# CONFIG_NO_IDLE_HZ is not set ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="root=/dev/sda2 ro rootdelay=10 rootfstype=ext2 noinitrd noirqdebug mem=32M@0x00000000 console=ttyS0,115200n8" ++# CONFIG_XIP_KERNEL is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_FASTFPE is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++# CONFIG_ARTHUR is not set ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++CONFIG_APM=y ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=m ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE=m ++# CONFIG_ARPD is not set ++CONFIG_SYN_COOKIES=y ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++CONFIG_INET_TUNNEL=m ++CONFIG_IP_TCPDIAG=y ++# CONFIG_IP_TCPDIAG_IPV6 is not set ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_BIC=y ++ ++# ++# IP: Virtual Server Configuration ++# ++CONFIG_IP_VS=m ++CONFIG_IP_VS_DEBUG=y ++CONFIG_IP_VS_TAB_BITS=12 ++ ++# ++# IPVS transport protocol load balancing support ++# ++# CONFIG_IP_VS_PROTO_TCP is not set ++# CONFIG_IP_VS_PROTO_UDP is not set ++# CONFIG_IP_VS_PROTO_ESP is not set ++# CONFIG_IP_VS_PROTO_AH is not set ++ ++# ++# IPVS scheduler ++# ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++# CONFIG_IP_VS_SED is not set ++# CONFIG_IP_VS_NQ is not set ++ ++# ++# IPVS application helper ++# ++# CONFIG_IPV6 is not set ++CONFIG_NETFILTER=y ++# CONFIG_NETFILTER_DEBUG is not set ++CONFIG_BRIDGE_NETFILTER=y ++ ++# ++# IP: Netfilter Configuration ++# ++# CONFIG_IP_NF_CONNTRACK is not set ++# CONFIG_IP_NF_CONNTRACK_MARK is not set ++# CONFIG_IP_NF_QUEUE is not set ++# CONFIG_IP_NF_IPTABLES is not set ++# CONFIG_IP_NF_ARPTABLES is not set ++ ++# ++# Bridge: Netfilter Configuration ++# ++# CONFIG_BRIDGE_NF_EBTABLES is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++# CONFIG_ATM is not set ++CONFIG_BRIDGE=m ++CONFIG_VLAN_8021Q=m ++# CONFIG_DECNET is not set ++CONFIG_LLC=m ++# CONFIG_LLC2 is not set ++CONFIG_IPX=m ++# CONFIG_IPX_INTERN is not set ++CONFIG_ATALK=m ++CONFIG_DEV_APPLETALK=y ++CONFIG_IPDDP=m ++CONFIG_IPDDP_ENCAP=y ++CONFIG_IPDDP_DECAP=y ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_NET_DIVERT is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CLK_JIFFIES=y ++# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set ++# CONFIG_NET_SCH_CLK_CPU is not set ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++# CONFIG_NET_SCH_HFSC is not set ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++# CONFIG_NET_SCH_NETEM is not set ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_QOS=y ++CONFIG_NET_ESTIMATOR=y ++CONFIG_NET_CLS=y ++# CONFIG_NET_CLS_BASIC is not set ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_ROUTE=y ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++# CONFIG_CLS_U32_PERF is not set ++# CONFIG_NET_CLS_IND is not set ++# CONFIG_CLS_U32_MARK is not set ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++# CONFIG_NET_EMATCH is not set ++# CONFIG_NET_CLS_ACT is not set ++CONFIG_NET_CLS_POLICE=y ++ ++# ++# Network testing ++# ++CONFIG_NET_PKTGEN=m ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++CONFIG_BT=m ++CONFIG_BT_L2CAP=m ++CONFIG_BT_SCO=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++# CONFIG_BT_HIDP is not set ++ ++# ++# Bluetooth device drivers ++# ++CONFIG_BT_HCIUSB=m ++CONFIG_BT_HCIUSB_SCO=y ++# CONFIG_BT_HCIUART is not set ++# CONFIG_BT_HCIBCM203X is not set ++# CONFIG_BT_HCIBPA10X is not set ++# CONFIG_BT_HCIBFUSB is not set ++# CONFIG_BT_HCIVHCI is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++CONFIG_MTD_REDBOOT_PARTS=y ++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 ++# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set ++# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_CFI_INTELEXT=y ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_XIP is not set ++ ++# ++# Mapping drivers for chip access ++# ++CONFIG_MTD_COMPLEX_MAPPINGS=y ++# CONFIG_MTD_PHYSMAP is not set ++# CONFIG_MTD_ARM_INTEGRATOR is not set ++CONFIG_MTD_IXP4XX=y ++# CONFIG_MTD_EDB7312 is not set ++# CONFIG_MTD_PCI is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_PMC551 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLKMTD is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++# CONFIG_MTD_NAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++ ++# ++# Block devices ++# ++# CONFIG_BLK_CPQ_DA is not set ++# CONFIG_BLK_CPQ_CISS_DA is not set ++# CONFIG_BLK_DEV_DAC960 is not set ++# CONFIG_BLK_DEV_UMEM is not set ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=m ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_SX8 is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=10240 ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++# CONFIG_CDROM_PKTCDVD is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++# CONFIG_IOSCHED_AS is not set ++CONFIG_IOSCHED_DEADLINE=y ++# CONFIG_IOSCHED_CFQ is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# ATA/ATAPI/MFM/RLL support ++# ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++CONFIG_SCSI=y ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++ ++# ++# SCSI Transport Attributes ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++ ++# ++# SCSI low-level drivers ++# ++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set ++# CONFIG_SCSI_3W_9XXX is not set ++# CONFIG_SCSI_ACARD is not set ++# CONFIG_SCSI_AACRAID is not set ++# CONFIG_SCSI_AIC7XXX is not set ++# CONFIG_SCSI_AIC7XXX_OLD is not set ++# CONFIG_SCSI_AIC79XX is not set ++# CONFIG_SCSI_DPT_I2O is not set ++# CONFIG_MEGARAID_NEWGEN is not set ++# CONFIG_MEGARAID_LEGACY is not set ++# CONFIG_SCSI_SATA is not set ++# CONFIG_SCSI_BUSLOGIC is not set ++# CONFIG_SCSI_DMX3191D is not set ++# CONFIG_SCSI_EATA is not set ++# CONFIG_SCSI_FUTURE_DOMAIN is not set ++# CONFIG_SCSI_GDTH is not set ++# CONFIG_SCSI_IPS is not set ++# CONFIG_SCSI_INITIO is not set ++# CONFIG_SCSI_INIA100 is not set ++# CONFIG_SCSI_SYM53C8XX_2 is not set ++# CONFIG_SCSI_IPR is not set ++# CONFIG_SCSI_QLOGIC_FC is not set ++# CONFIG_SCSI_QLOGIC_1280 is not set ++CONFIG_SCSI_QLA2XXX=y ++# CONFIG_SCSI_QLA21XX is not set ++# CONFIG_SCSI_QLA22XX is not set ++# CONFIG_SCSI_QLA2300 is not set ++# CONFIG_SCSI_QLA2322 is not set ++# CONFIG_SCSI_QLA6312 is not set ++# CONFIG_SCSI_QLA24XX is not set ++# CONFIG_SCSI_LPFC is not set ++# CONFIG_SCSI_DC395x is not set ++# CONFIG_SCSI_DC390T is not set ++# CONFIG_SCSI_NSP32 is not set ++# CONFIG_SCSI_DEBUG is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++CONFIG_MD=y ++CONFIG_BLK_DEV_MD=m ++# CONFIG_MD_LINEAR is not set ++CONFIG_MD_RAID0=m ++CONFIG_MD_RAID1=m ++# CONFIG_MD_RAID10 is not set ++CONFIG_MD_RAID5=m ++# CONFIG_MD_RAID6 is not set ++# CONFIG_MD_MULTIPATH is not set ++# CONFIG_MD_FAULTY is not set ++# CONFIG_BLK_DEV_DM is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++# CONFIG_FUSION_SPI is not set ++# CONFIG_FUSION_FC is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++# CONFIG_IEEE1394 is not set ++ ++# ++# I2O device support ++# ++# CONFIG_I2O is not set ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++ ++# ++# ARCnet devices ++# ++# CONFIG_ARCNET is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_HAPPYMEAL is not set ++# CONFIG_SUNGEM is not set ++# CONFIG_NET_VENDOR_3COM is not set ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++ ++# ++# Tulip family network device support ++# ++# CONFIG_NET_TULIP is not set ++# CONFIG_HP100 is not set ++CONFIG_NET_PCI=y ++# CONFIG_PCNET32 is not set ++# CONFIG_AMD8111_ETH is not set ++# CONFIG_ADAPTEC_STARFIRE is not set ++# CONFIG_B44 is not set ++# CONFIG_FORCEDETH is not set ++# CONFIG_DGRS is not set ++# CONFIG_EEPRO100 is not set ++# CONFIG_E100 is not set ++# CONFIG_FEALNX is not set ++# CONFIG_NATSEMI is not set ++# CONFIG_NE2K_PCI is not set ++# CONFIG_8139CP is not set ++# CONFIG_8139TOO is not set ++# CONFIG_SIS900 is not set ++# CONFIG_EPIC100 is not set ++# CONFIG_SUNDANCE is not set ++# CONFIG_TLAN is not set ++# CONFIG_VIA_RHINE is not set ++ ++# ++# Ethernet (1000 Mbit) ++# ++# CONFIG_ACENIC is not set ++# CONFIG_DL2K is not set ++# CONFIG_E1000 is not set ++# CONFIG_NS83820 is not set ++# CONFIG_HAMACHI is not set ++# CONFIG_YELLOWFIN is not set ++# CONFIG_R8169 is not set ++# CONFIG_SKGE is not set ++# CONFIG_SK98LIN is not set ++# CONFIG_VIA_VELOCITY is not set ++# CONFIG_TIGON3 is not set ++# CONFIG_BNX2 is not set ++ ++# ++# Ethernet (10000 Mbit) ++# ++# CONFIG_IXGB is not set ++# CONFIG_S2IO is not set ++ ++# ++# Token Ring devices ++# ++# CONFIG_TR is not set ++ ++# ++# Wireless LAN (non-hamradio) ++# ++CONFIG_NET_RADIO=y ++ ++# ++# Obsolete Wireless cards support (pre-802.11) ++# ++# CONFIG_STRIP is not set ++ ++# ++# Wireless 802.11b ISA/PCI cards support ++# ++# CONFIG_HERMES is not set ++# CONFIG_ATMEL is not set ++ ++# ++# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support ++# ++# CONFIG_PRISM54 is not set ++CONFIG_NET_WIRELESS=y ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++# CONFIG_FDDI is not set ++# CONFIG_HIPPI is not set ++CONFIG_PPP=m ++# CONFIG_PPP_MULTILINK is not set ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=m ++# CONFIG_PPP_SYNC_TTY is not set ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++# CONFIG_PPPOE is not set ++# CONFIG_SLIP is not set ++# CONFIG_NET_FC is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++# CONFIG_INPUT is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++# CONFIG_VT is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_NR_UARTS=2 ++# CONFIG_SERIAL_8250_EXTENDED is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++# CONFIG_SERIAL_JSM is not set ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_IXP4XX_WATCHDOG=y ++ ++# ++# PCI-based Watchdog Cards ++# ++# CONFIG_PCIPCWATCHDOG is not set ++# CONFIG_WDTPCI is not set ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++# CONFIG_NVRAM is not set ++# CONFIG_RTC is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++# CONFIG_APPLICOM is not set ++ ++# ++# Ftape, the floppy tape device driver ++# ++# CONFIG_DRM is not set ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++ ++# ++# I2C support ++# ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=y ++ ++# ++# I2C Algorithms ++# ++CONFIG_I2C_ALGOBIT=y ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++# CONFIG_I2C_ALI1535 is not set ++# CONFIG_I2C_ALI1563 is not set ++# CONFIG_I2C_ALI15X3 is not set ++# CONFIG_I2C_AMD756 is not set ++# CONFIG_I2C_AMD8111 is not set ++# CONFIG_I2C_I801 is not set ++# CONFIG_I2C_I810 is not set ++# CONFIG_I2C_PIIX4 is not set ++# CONFIG_I2C_IOP3XX is not set ++# CONFIG_I2C_ISA is not set ++CONFIG_I2C_IXP4XX=y ++# CONFIG_I2C_NFORCE2 is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_PROSAVAGE is not set ++# CONFIG_I2C_SAVAGE4 is not set ++# CONFIG_SCx200_ACB is not set ++# CONFIG_I2C_SIS5595 is not set ++# CONFIG_I2C_SIS630 is not set ++# CONFIG_I2C_SIS96X is not set ++# CONFIG_I2C_STUB is not set ++# CONFIG_I2C_VIA is not set ++# CONFIG_I2C_VIAPRO is not set ++# CONFIG_I2C_VOODOO3 is not set ++# CONFIG_I2C_PCA_ISA is not set ++CONFIG_I2C_SENSOR=y ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++CONFIG_SENSORS_EEPROM=y ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_RTC8564 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++CONFIG_SENSORS_X1205=y ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# Hardware Monitoring support ++# ++# CONFIG_HWMON is not set ++ ++# ++# Misc devices ++# ++ ++# ++# Multimedia devices ++# ++CONFIG_VIDEO_DEV=m ++ ++# ++# Video For Linux ++# ++ ++# ++# Video Adapters ++# ++# CONFIG_VIDEO_BT848 is not set ++# CONFIG_VIDEO_CPIA is not set ++# CONFIG_VIDEO_SAA5246A is not set ++# CONFIG_VIDEO_SAA5249 is not set ++# CONFIG_TUNER_3036 is not set ++# CONFIG_VIDEO_STRADIS is not set ++# CONFIG_VIDEO_ZORAN is not set ++# CONFIG_VIDEO_SAA7134 is not set ++# CONFIG_VIDEO_MXB is not set ++# CONFIG_VIDEO_DPC is not set ++# CONFIG_VIDEO_HEXIUM_ORION is not set ++# CONFIG_VIDEO_HEXIUM_GEMINI is not set ++# CONFIG_VIDEO_CX88 is not set ++# CONFIG_VIDEO_OVCAMCHIP is not set ++ ++# ++# Radio Adapters ++# ++# CONFIG_RADIO_GEMTEK_PCI is not set ++# CONFIG_RADIO_MAXIRADIO is not set ++# CONFIG_RADIO_MAESTRO is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_FB is not set ++ ++# ++# Sound ++# ++CONFIG_SOUND=y ++ ++# ++# Advanced Linux Sound Architecture ++# ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++CONFIG_SND_HWDEP=y ++CONFIG_SND_RAWMIDI=y ++# CONFIG_SND_SEQUENCER is not set ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=y ++CONFIG_SND_PCM_OSS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++ ++# ++# Generic devices ++# ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++ ++# ++# PCI devices ++# ++# CONFIG_SND_ALI5451 is not set ++# CONFIG_SND_ATIIXP is not set ++# CONFIG_SND_ATIIXP_MODEM is not set ++# CONFIG_SND_AU8810 is not set ++# CONFIG_SND_AU8820 is not set ++# CONFIG_SND_AU8830 is not set ++# CONFIG_SND_AZT3328 is not set ++# CONFIG_SND_BT87X is not set ++# CONFIG_SND_CS46XX is not set ++# CONFIG_SND_CS4281 is not set ++# CONFIG_SND_EMU10K1 is not set ++# CONFIG_SND_EMU10K1X is not set ++# CONFIG_SND_CA0106 is not set ++# CONFIG_SND_KORG1212 is not set ++# CONFIG_SND_MIXART is not set ++# CONFIG_SND_NM256 is not set ++# CONFIG_SND_RME32 is not set ++# CONFIG_SND_RME96 is not set ++# CONFIG_SND_RME9652 is not set ++# CONFIG_SND_HDSP is not set ++# CONFIG_SND_HDSPM is not set ++# CONFIG_SND_TRIDENT is not set ++# CONFIG_SND_YMFPCI is not set ++# CONFIG_SND_ALS4000 is not set ++# CONFIG_SND_CMIPCI is not set ++# CONFIG_SND_ENS1370 is not set ++# CONFIG_SND_ENS1371 is not set ++# CONFIG_SND_ES1938 is not set ++# CONFIG_SND_ES1968 is not set ++# CONFIG_SND_MAESTRO3 is not set ++# CONFIG_SND_FM801 is not set ++# CONFIG_SND_ICE1712 is not set ++# CONFIG_SND_ICE1724 is not set ++# CONFIG_SND_INTEL8X0 is not set ++# CONFIG_SND_INTEL8X0M is not set ++# CONFIG_SND_SONICVIBES is not set ++# CONFIG_SND_VIA82XX is not set ++# CONFIG_SND_VIA82XX_MODEM is not set ++# CONFIG_SND_VX222 is not set ++# CONFIG_SND_HDA_INTEL is not set ++ ++# ++# ALSA ARM devices ++# ++ ++# ++# USB devices ++# ++CONFIG_SND_USB_AUDIO=y ++ ++# ++# Open Sound System ++# ++# CONFIG_SOUND_PRIME is not set ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_BANDWIDTH is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_SUSPEND is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++CONFIG_USB_EHCI_HCD=y ++# CONFIG_USB_EHCI_SPLIT_ISO is not set ++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_UHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_AUDIO is not set ++ ++# ++# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem ++# ++# CONFIG_USB_MIDI is not set ++CONFIG_USB_ACM=m ++CONFIG_USB_PRINTER=m ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++CONFIG_USB_STORAGE_DATAFAB=y ++CONFIG_USB_STORAGE_FREECOM=y ++CONFIG_USB_STORAGE_DPCM=y ++CONFIG_USB_STORAGE_USBAT=y ++CONFIG_USB_STORAGE_SDDR09=y ++CONFIG_USB_STORAGE_SDDR55=y ++CONFIG_USB_STORAGE_JUMPSHOT=y ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=m ++ ++# ++# Input core support is needed for USB HID input layer or HIDBP support ++# ++CONFIG_USB_HIDDEV=y ++ ++# ++# USB HID Boot Protocol drivers ++# ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB Multimedia devices ++# ++# CONFIG_USB_DABUSB is not set ++# CONFIG_USB_VICAM is not set ++# CONFIG_USB_DSBR is not set ++# CONFIG_USB_IBMCAM is not set ++# CONFIG_USB_KONICAWC is not set ++# CONFIG_USB_OV511 is not set ++# CONFIG_USB_SE401 is not set ++# CONFIG_USB_SN9C102 is not set ++# CONFIG_USB_STV680 is not set ++# CONFIG_USB_PWC is not set ++ ++# ++# USB Network Adapters ++# ++CONFIG_USB_CATC=y ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=y ++CONFIG_USB_RTL8150=y ++CONFIG_USB_USBNET=y ++ ++# ++# USB Host-to-Host Cables ++# ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_BELKIN=y ++CONFIG_USB_GENESYS=y ++CONFIG_USB_NET1080=y ++CONFIG_USB_PL2301=y ++CONFIG_USB_KC2190=y ++ ++# ++# Intelligent USB Devices/Gadgets ++# ++CONFIG_USB_ARMLINUX=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_ZAURUS=y ++CONFIG_USB_CDCETHER=y ++ ++# ++# USB Network Adapters ++# ++CONFIG_USB_AX8817X=y ++# CONFIG_USB_ZD1201 is not set ++# CONFIG_USB_MON is not set ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++# CONFIG_USB_SERIAL_AIRPRIME is not set ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP2101=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++# CONFIG_USB_SERIAL_KEYSPAN is not set ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_HP4X=m ++# CONFIG_USB_SERIAL_SAFE is not set ++# CONFIG_USB_SERIAL_TI is not set ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_EZUSB=y ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++CONFIG_USB_LCD=m ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGETKIT is not set ++# CONFIG_USB_PHIDGETSERVO is not set ++# CONFIG_USB_IDMOUSE is not set ++CONFIG_USB_SISUSBVGA=m ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++# CONFIG_MMC is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++CONFIG_REISERFS_FS=m ++# CONFIG_REISERFS_CHECK is not set ++# CONFIG_REISERFS_PROC_INFO is not set ++# CONFIG_REISERFS_FS_XATTR is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++ ++# ++# XFS support ++# ++# CONFIG_XFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_INOTIFY is not set ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++CONFIG_ISO9660_FS=m ++# CONFIG_JOLIET is not set ++# CONFIG_ZISOFS is not set ++CONFIG_UDF_FS=m ++CONFIG_UDF_NLS=y ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=m ++CONFIG_MSDOS_FS=m ++CONFIG_VFAT_FS=m ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="utf8" ++CONFIG_NTFS_FS=m ++# CONFIG_NTFS_DEBUG is not set ++# CONFIG_NTFS_RW is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_SYSFS=y ++# CONFIG_DEVPTS_FS_XATTR is not set ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_XATTR is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_JFFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++# CONFIG_JFFS2_FS_WRITEBUFFER is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=m ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++# CONFIG_NFS_V4 is not set ++# CONFIG_NFS_DIRECTIO is not set ++CONFIG_NFSD=m ++# CONFIG_NFSD_V3 is not set ++CONFIG_NFSD_TCP=y ++CONFIG_LOCKD=m ++CONFIG_LOCKD_V4=y ++CONFIG_EXPORTFS=m ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=m ++# CONFIG_RPCSEC_GSS_KRB5 is not set ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++CONFIG_SMB_FS=m ++# CONFIG_SMB_NLS_DEFAULT is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=m ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=m ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=m ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_NLS_UTF8=m ++ ++# ++# Profiling support ++# ++# CONFIG_PROFILING is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_MAGIC_SYSRQ=y ++CONFIG_LOG_BUF_SHIFT=14 ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_FS is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_DEBUG_USER is not set ++# CONFIG_DEBUG_WAITQ is not set ++CONFIG_DEBUG_ERRORS=y ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_HMAC=y ++CONFIG_CRYPTO_NULL=m ++CONFIG_CRYPTO_MD4=m ++CONFIG_CRYPTO_MD5=m ++CONFIG_CRYPTO_SHA1=m ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_DES=m ++CONFIG_CRYPTO_BLOWFISH=m ++CONFIG_CRYPTO_TWOFISH=m ++CONFIG_CRYPTO_SERPENT=m ++CONFIG_CRYPTO_AES=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_CAST6=m ++CONFIG_CRYPTO_TEA=m ++CONFIG_CRYPTO_ARC4=m ++CONFIG_CRYPTO_KHAZAD=m ++CONFIG_CRYPTO_ANUBIS=m ++CONFIG_CRYPTO_DEFLATE=m ++CONFIG_CRYPTO_MICHAEL_MIC=m ++CONFIG_CRYPTO_CRC32C=m ++CONFIG_CRYPTO_TEST=m ++ ++# ++# Hardware crypto devices ++# ++ ++# ++# Library routines ++# ++CONFIG_CRC_CCITT=m ++CONFIG_CRC32=y ++CONFIG_LIBCRC32C=m ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/nslu2-kernel/2.6/96-nslu2-le-defconfig.patch b/packages/linux/nslu2-kernel/2.6/96-nslu2-le-defconfig.patch new file mode 100644 index 0000000000..4b6e28a878 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6/96-nslu2-le-defconfig.patch @@ -0,0 +1,29 @@ +diff -urN nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig test/arch/arm/configs/nslu2_defconfig +--- nslu2-2.6.13.1/arch/arm/configs/nslu2_defconfig 2005-09-17 16:45:43.000000000 +0200 ++++ test/arch/arm/configs/nslu2_defconfig 2005-09-17 16:46:48.000000000 +0200 +@@ -1,7 +1,7 @@ + # + # Automatically generated make config: don't edit + # Linux kernel version: 2.6.13.1 +-# Sat Sep 17 16:45:18 2005 ++# Sat Sep 17 16:23:38 2005 + # + CONFIG_ARM=y + CONFIG_MMU=y +@@ -120,7 +120,7 @@ + # Processor Features + # + # CONFIG_ARM_THUMB is not set +-CONFIG_CPU_BIG_ENDIAN=y ++# CONFIG_CPU_BIG_ENDIAN is not set + CONFIG_XSCALE_PMU=y + CONFIG_DMABOUNCE=y + +@@ -168,6 +168,7 @@ + # At least one emulation must be selected + # + CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set + # CONFIG_FPE_FASTFPE is not set + + # -- cgit v1.2.3