From 53933a30544a77e3dd40a62ef810a6d37c275f68 Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Fri, 11 Nov 2005 15:31:02 +0000
Subject: nas100d-kernel: Added 60-nas100d-ide.patch from azummo

---
 .../nas100d-kernel/2.6.14/60-nas100d-ide.patch     | 117 +++++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100644 packages/linux/nas100d-kernel/2.6.14/60-nas100d-ide.patch

(limited to 'packages/linux/nas100d-kernel')

diff --git a/packages/linux/nas100d-kernel/2.6.14/60-nas100d-ide.patch b/packages/linux/nas100d-kernel/2.6.14/60-nas100d-ide.patch
new file mode 100644
index 0000000000..7928266b32
--- /dev/null
+++ b/packages/linux/nas100d-kernel/2.6.14/60-nas100d-ide.patch
@@ -0,0 +1,117 @@
+ drivers/ide/pci/aec62xx.c |   36 +++++++++++++++++++++++++++++++++---
+ drivers/ide/setup-pci.c   |    9 ++++++++-
+ 2 files changed, 41 insertions(+), 4 deletions(-)
+
+--- linux-2.6.14.orig/drivers/ide/pci/aec62xx.c	2005-11-12 15:31:31.000000000 +0100
++++ linux-2.6.14/drivers/ide/pci/aec62xx.c	2005-11-12 15:32:57.000000000 +0100
+@@ -143,7 +143,13 @@ static int aec6210_tune_chipset (ide_dri
+ 	u8 ultra = 0, ultra_conf = 0;
+ 	u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
+ 	unsigned long flags;
+-
++#ifdef CONFIG_MACH_NAS100D
++	byte reg4ah;
++	pci_write_config_byte(hwif->pci_dev, PCI_LATENCY_TIMER, 0x90);
++	/* Enable burst mode & force 2 ports enable  */
++	pci_read_config_byte(hwif->pci_dev, 0x4a, &reg4ah);
++	pci_write_config_byte(hwif->pci_dev, 0x4a, reg4ah | 0x80);
++#endif
+ 	local_irq_save(flags);
+ 	/* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
+ 	pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
+@@ -263,7 +269,7 @@ static int aec62xx_irq_timeout (ide_driv
+ 		case PCI_DEVICE_ID_ARTOP_ATP865:
+ 		case PCI_DEVICE_ID_ARTOP_ATP865R:
+ 			printk(" AEC62XX time out ");
+-#if 0
++#ifdef CONFIG_MACH_NAS100D
+ 			{
+ 				int i = 0;
+ 				u8 reg49h = 0;
+@@ -277,7 +283,7 @@ static int aec62xx_irq_timeout (ide_driv
+ 		default:
+ 			break;
+ 	}
+-#if 0
++#ifdef CONFIG_MACH_NAS100D
+ 	{
+ 		ide_hwif_t *hwif	= HWIF(drive);
+ 		struct pci_dev *dev	= hwif->pci_dev;
+@@ -299,6 +305,13 @@ static unsigned int __devinit init_chips
+ {
+ 	int bus_speed = system_bus_clock();
+ 
++#ifdef CONFIG_MACH_NAS100D
++	/* enable both ports */
++	byte tmp;
++	pci_read_config_byte(dev, 0x4a, &tmp);
++	pci_write_config_byte(dev, 0x4a, tmp | 0x06);
++#endif
++
+ 	if (dev->resource[PCI_ROM_RESOURCE].start) {
+ 		pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
+ 		printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
+@@ -312,11 +325,22 @@ static unsigned int __devinit init_chips
+ 	return dev->irq;
+ }
+ 
++#ifdef CONFIG_MACH_NAS100D
++void nas100d_outw(u16 addr, unsigned long port)
++{
++	outsw(port, &addr, 1);
++}
++#endif
++
+ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
+ {
+ 	hwif->autodma = 0;
+ 	hwif->tuneproc = &aec62xx_tune_drive;
+ 	hwif->speedproc = &aec62xx_tune_chipset;
++#ifdef CONFIG_MACH_NAS100D
++	printk(KERN_INFO "aec62xx: nas100d workaround\n");
++	hwif->OUTW = nas100d_outw;
++#endif
+ 
+ 	if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
+ 		hwif->serialized = hwif->channel;
+@@ -408,6 +432,9 @@ static ide_pci_device_t aec62xx_chipsets
+ 		.init_dma	= init_dma_aec62xx,
+ 		.channels	= 2,
+ 		.autodma	= NOAUTODMA,
++#ifdef CONFIG_MACH_NAS100D
++		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
++#endif
+ 		.bootable	= OFF_BOARD,
+ 	},{	/* 2 */
+ 		.name		= "AEC6260R",
+@@ -427,6 +454,9 @@ static ide_pci_device_t aec62xx_chipsets
+ 		.init_dma	= init_dma_aec62xx,
+ 		.channels	= 2,
+ 		.autodma	= AUTODMA,
++#ifdef CONFIG_MACH_NAS100D
++		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
++#endif
+ 		.bootable	= OFF_BOARD,
+ 	},{	/* 4 */
+ 		.name		= "AEC6X80R",
+--- linux-2.6.14.orig/drivers/ide/setup-pci.c	2005-11-12 14:33:27.000000000 +0100
++++ linux-2.6.14/drivers/ide/setup-pci.c	2005-11-12 15:32:57.000000000 +0100
+@@ -602,10 +602,17 @@ void ide_pci_setup_ports(struct pci_dev 
+ 		if ((d->flags & IDEPCI_FLAG_FORCE_PDC) &&
+ 		    (secondpdc++==1) && (port==1))
+ 			goto controller_ok;
+-			
++
++#ifdef CONFIG_MACH_NAS100D
++// XXX ????
++		pci_read_config_byte(dev, e->reg, &tmp);
++		pci_write_config_byte(dev, e->reg, tmp & ~0x01);
++#endif
+ 		if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
+ 		    (tmp & e->mask) != e->val))
+ 			continue;	/* port not enabled */
++
++
+ controller_ok:
+ 
+ 		if (d->channels	<= port)
-- 
cgit v1.2.3