From e7005ef68aeb05f4656029050b31c44a8e09f167 Mon Sep 17 00:00:00 2001 From: Rolf Leggewie Date: Sun, 4 May 2008 12:00:51 +0000 Subject: linux-2.6.24: commit ts72xx-rs485.patch, left out in 790aa11c64e9dc4a2c87583222f59ac903d1859a --- .../linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch | 219 +++++++++++++++++++++ 1 file changed, 219 insertions(+) create mode 100644 packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch (limited to 'packages/linux/linux-2.6.24/ts72xx') diff --git a/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch b/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch new file mode 100644 index 0000000000..0883322c28 --- /dev/null +++ b/packages/linux/linux-2.6.24/ts72xx/ts72xx-rs485.patch @@ -0,0 +1,219 @@ +RS485 auto mode support ported from 2.4 (diff against 2.6.19-rc6-git10) + +Signed-off-by: Petr Stetiar + +diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c +index 4213fab..5b3c5ff 100644 +--- a/drivers/serial/amba-pl010.c ++++ b/drivers/serial/amba-pl010.c +@@ -50,6 +50,7 @@ + #include + + #include ++#include + + #define UART_NR 8 + +@@ -65,6 +66,11 @@ + #define UART_DUMMY_RSR_RX 256 + #define UART_PORT_SIZE 64 + ++#ifdef CONFIG_MACH_TS72XX ++static void __iomem *ts_rs485_data9_register; ++static void __iomem *ts_rs485_control_register; ++#endif ++ + /* + * We wrap our port structure around the generic uart_port. + */ +@@ -487,6 +493,107 @@ static int pl010_verify_port(struct uart + return ret; + } + ++#ifdef CONFIG_MACH_TS72XX ++static int ts72xx_rs485_init(void) ++{ ++ ts_rs485_data9_register = ioremap(TS72XX_RS485_DATA9_PHYS_BASE, 4096); ++ if (ts_rs485_data9_register == NULL) { ++ return -1; ++ } ++ ++ ts_rs485_control_register = ioremap(TS72XX_RS485_CONTROL_PHYS_BASE, 4096); ++ if (ts_rs485_control_register == NULL) { ++ iounmap(ts_rs485_data9_register); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static int ts72xx_auto485(struct uart_port *port, unsigned int cmd, unsigned long *arg) ++{ ++ int baud, cflag, mode; ++ int datalength; ++ ++ mode = (int)*arg; ++ if (!is_rs485_installed()) { ++ printk("amba-pl010.c: this board does not support RS485 auto mode\n"); ++ return -EINVAL; ++ } ++ ++ if (port->line != 1) { ++ printk("amba-pl010.c: auto RS485 mode is only supported on second port (/dev/ttyAM1)\n"); ++ return -EINVAL; ++ } ++ ++ datalength = 8; ++ cflag = port->info->tty->termios->c_cflag ; ++ if (cflag & PARENB) ++ datalength++; ++ ++ if (cflag & CSTOPB) ++ datalength++; ++ ++ baud = tty_get_baud_rate(port->info->tty); ++ ++ switch (cmd) { ++ case TIOC_SBCC485: ++ if ((mode & TS72XX_RS485_AUTO485FD) || (mode & TS72XX_RS485_AUTO485HD)) { ++ printk("amba-pl010.c: unsetting auto RS485 mode\n"); ++ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_control_register); ++ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_data9_register); ++ } ++ break; ++ case TIOC_SBCS485: ++ if (mode & TS72XX_RS485_AUTO485FD) { ++ printk ("amba-pl010.c: setting FULL duplex auto RS485 mode\n"); ++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_control_register); ++ if (datalength > 8) ++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register); ++ } else if (mode & TS72XX_RS485_AUTO485HD) { ++ printk("amba-pl010.c: setting HALF DUPLEX auto RS485 mode\n"); ++ switch (baud) { ++ case 9600: ++ __raw_writew(TS72XX_RS485_MODE_9600_HD, ts_rs485_control_register); ++ break; ++ case 19200: ++ __raw_writew(TS72XX_RS485_MODE_19200_HD, ts_rs485_control_register); ++ break; ++ case 57600: ++ __raw_writew(TS72XX_RS485_MODE_57600_HD, ts_rs485_control_register); ++ break; ++ case 115200: ++ __raw_writew(TS72XX_RS485_MODE_115200_HD, ts_rs485_control_register); ++ break; ++ default: ++ printk("amba-pl010.c: %d baud rate is not supported for auto RS485 mode\n", baud); ++ return -1; ++ } ++ if (datalength > 8) ++ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register); ++ } ++ break; ++ } ++ ++ return 0; ++} ++#endif ++ ++int pl010_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) ++{ ++#ifdef CONFIG_MACH_TS72XX ++ switch (cmd) { ++ case TIOC_SBCC485: ++ case TIOC_SBCS485: ++ return ts72xx_auto485(port, cmd, (unsigned long *)arg); ++ break; ++ default: ++ return -ENOIOCTLCMD; ++ } ++#endif ++ return -ENOIOCTLCMD; ++} ++ + static struct uart_ops amba_pl010_pops = { + .tx_empty = pl010_tx_empty, + .set_mctrl = pl010_set_mctrl, +@@ -504,6 +611,7 @@ static struct uart_ops amba_pl010_pops = + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, ++ .ioctl = pl010_ioctl, + }; + + static struct uart_amba_port *amba_ports[UART_NR]; +@@ -746,6 +854,15 @@ static int __init pl010_init(void) + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl010_driver); ++#ifdef CONFIG_MACH_TS72XX ++ if (!ret && is_rs485_installed()) { ++ ret = ts72xx_rs485_init(); ++ if (ret) ++ printk("amba-pl010.c: ts72xx_rs485_init() failed\n"); ++ else ++ printk("amba-pl010.c: auto RS485 mode initialized\n"); ++ } ++#endif + if (ret) + uart_unregister_driver(&amba_reg); + } +@@ -756,6 +873,10 @@ static void __exit pl010_exit(void) + { + amba_driver_unregister(&pl010_driver); + uart_unregister_driver(&amba_reg); ++#ifdef CONFIG_MACH_TS72XX ++ iounmap(ts_rs485_data9_register); ++ iounmap(ts_rs485_control_register); ++#endif + } + + module_init(pl010_init); +diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h +index a94f63f..4c9396b 100644 +--- a/include/asm-arm/arch-ep93xx/ts72xx.h ++++ b/include/asm-arm/arch-ep93xx/ts72xx.h +@@ -68,6 +68,16 @@ + #define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 + #define TS72XX_RTC_DATA_SIZE 0x00001000 + ++#define TS72XX_RS485_CONTROL_PHYS_BASE 0x22C00000 ++#define TS72XX_RS485_DATA9_PHYS_BASE 0x23000000 ++#define TS72XX_RS485_AUTO485FD 1 ++#define TS72XX_RS485_AUTO485HD 2 ++#define TS72XX_RS485_MODE_RS232 0x00 ++#define TS72XX_RS485_MODE_FD 0x01 ++#define TS72XX_RS485_MODE_9600_HD 0x04 ++#define TS72XX_RS485_MODE_19200_HD 0x05 ++#define TS72XX_RS485_MODE_57600_HD 0x06 ++#define TS72XX_RS485_MODE_115200_HD 0x07 + + #ifndef __ASSEMBLY__ + #include +@@ -87,6 +100,12 @@ static inline int board_is_ts7260(void) + return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + } + ++static inline int is_rs485_installed(void) ++{ ++ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & ++ TS72XX_OPTIONS_COM2_RS485); ++} ++ + static inline int is_max197_installed(void) + { + return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & +diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h +index bb9a7aa..4d7dad1 100644 +--- a/include/asm-arm/ioctls.h ++++ b/include/asm-arm/ioctls.h +@@ -66,6 +66,9 @@ + #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + #define FIOQSIZE 0x545E + ++#define TIOC_SBCC485 0x545F /* TS72xx RTS/485 mode clear */ ++#define TIOC_SBCS485 0x5460 /* TS72xx RTS/485 mode set */ ++ + /* Used for packet mode */ + #define TIOCPKT_DATA 0 + #define TIOCPKT_FLUSHREAD 1 -- cgit v1.2.3