From d1f179f470466c3ff18855ba7c4bc9ca41fab2df Mon Sep 17 00:00:00 2001 From: Philip Balister Date: Mon, 1 Oct 2007 19:28:02 +0000 Subject: linux : Update patches for gumstix from gumstix buildroot. --- .../linux/linux-2.6.21/gumstix-pxa270-mmc.patch | 33 ++ packages/linux/linux-2.6.21/mmc-card-detect.patch | 6 +- packages/linux/linux-2.6.21/pxafb-18bpp-mode.patch | 17 +- packages/linux/linux-2.6.21/pxafb-definition.patch | 42 +-- packages/linux/linux-2.6.21/smc911x-fixup.patch | 392 +++++++++++++++++++++ 5 files changed, 462 insertions(+), 28 deletions(-) create mode 100644 packages/linux/linux-2.6.21/gumstix-pxa270-mmc.patch create mode 100644 packages/linux/linux-2.6.21/smc911x-fixup.patch (limited to 'packages/linux/linux-2.6.21') diff --git a/packages/linux/linux-2.6.21/gumstix-pxa270-mmc.patch b/packages/linux/linux-2.6.21/gumstix-pxa270-mmc.patch new file mode 100644 index 0000000000..59d97809d1 --- /dev/null +++ b/packages/linux/linux-2.6.21/gumstix-pxa270-mmc.patch @@ -0,0 +1,33 @@ +Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c +=================================================================== +--- linux-2.6.21gum.orig/arch/arm/mach-pxa/gumstix.c ++++ linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c +@@ -33,8 +33,9 @@ + + static struct pxamci_platform_data gumstix_mci_platform_data; + +-static int gumstix_mci_init(struct device *dev, irqreturn_t (*gumstix_detect_int)(int, void *, struct pt_regs *), void *data) ++static int gumstix_mci_init(struct device *dev, irq_handler_t gumstix_detect_int, void *data) + { ++#ifndef CONFIG_ARCH_GUMSTIX_VERDEX + int err; + + pxa_gpio_mode(GPIO6_MMCCLK_MD); +@@ -55,6 +56,17 @@ static int gumstix_mci_init(struct devic + } + + err = set_irq_type(GUMSTIX_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); ++#else ++ // Setup GPIOs for MMC on the 120-pin connector ++ // There is no card detect on a uSD connector so no interrupt to register ++ // There is no WP detect GPIO line either ++ pxa_gpio_mode(GPIO92_MMCDAT0_MD); ++ pxa_gpio_mode(GPIO112_MMCCMD_MD); ++ pxa_gpio_mode(GPIO110_MMCDAT2_MD); ++ pxa_gpio_mode(GPIO111_MMCDAT3_MD); ++ pxa_gpio_mode(GPIO109_MMCDAT1_MD); ++ pxa_gpio_mode(GPIO32_MMCCLK_MD); ++#endif + + return 0; + } diff --git a/packages/linux/linux-2.6.21/mmc-card-detect.patch b/packages/linux/linux-2.6.21/mmc-card-detect.patch index 9a853b4df8..26dd970e3b 100644 --- a/packages/linux/linux-2.6.21/mmc-card-detect.patch +++ b/packages/linux/linux-2.6.21/mmc-card-detect.patch @@ -2,7 +2,7 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c =================================================================== --- linux-2.6.21gum.orig/arch/arm/mach-pxa/gumstix.c +++ linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c -@@ -29,19 +29,51 @@ +@@ -29,19 +29,55 @@ #include "generic.h" @@ -38,9 +38,13 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c +static int gumstix_mci_get_ro(struct device *dev) +{ ++#ifdef CONFIG_ARCH_GUMSTIX_VERDEX ++ return 0; // microSD is always writable on verdex ++#else + int ro; + ro = GPLR(GUMSTIX_GPIO_nSD_WP) & GPIO_bit(GUMSTIX_GPIO_nSD_WP); + return ro; ++#endif +} + +static void gumstix_mci_exit(struct device *dev, void *data) diff --git a/packages/linux/linux-2.6.21/pxafb-18bpp-mode.patch b/packages/linux/linux-2.6.21/pxafb-18bpp-mode.patch index 3643b402e5..c9849d22f4 100644 --- a/packages/linux/linux-2.6.21/pxafb-18bpp-mode.patch +++ b/packages/linux/linux-2.6.21/pxafb-18bpp-mode.patch @@ -154,7 +154,7 @@ Index: linux-2.6.21gum/drivers/video/pxafb.c case '-': namelen = i; if (!bpp_specified && !yres_specified) { -@@ -1227,6 +1268,18 @@ static int __init pxafb_parse_options(st +@@ -1227,12 +1268,29 @@ static int __init pxafb_parse_options(st } if (bpp_specified) switch (bpp) { @@ -173,6 +173,17 @@ Index: linux-2.6.21gum/drivers/video/pxafb.c case 1: case 2: case 4: + case 8: + case 16: + inf->modes[0].bpp = bpp; ++ if(nonstd_specified) { ++ dev_err(dev, "Depth %d requires nonstd to *not* be specified\n",bpp); ++ } else { ++ inf->modes[0].nonstd = 0; ++ } + dev_info(dev, "overriding bit depth: %d\n", bpp); + break; + default: Index: linux-2.6.21gum/include/asm-arm/arch-pxa/pxa-regs.h =================================================================== --- linux-2.6.21gum.orig/include/asm-arm/arch-pxa/pxa-regs.h @@ -217,7 +228,7 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c =================================================================== --- linux-2.6.21gum.orig/arch/arm/mach-pxa/gumstix.c +++ linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c -@@ -100,7 +100,8 @@ static struct pxafb_mode_info gumstix_fb +@@ -116,7 +116,8 @@ static struct pxafb_mode_info gumstix_fb .pixclock = 110000, .xres = 480, .yres = 272, @@ -227,7 +238,7 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c .hsync_len = 41, .left_margin = 2, .right_margin = 2, -@@ -139,7 +140,8 @@ static struct pxafb_mode_info gumstix_fb +@@ -144,7 +145,8 @@ static struct pxafb_mode_info gumstix_fb .vsync_len = 10, // VLW from datasheet: 10 typ .upper_margin = 2, // VBP - VLW from datasheet: 12 - 10 = 2 .lower_margin = 4, // VFP from datasheet: 4 typ diff --git a/packages/linux/linux-2.6.21/pxafb-definition.patch b/packages/linux/linux-2.6.21/pxafb-definition.patch index 2a782c6143..56369fd788 100644 --- a/packages/linux/linux-2.6.21/pxafb-definition.patch +++ b/packages/linux/linux-2.6.21/pxafb-definition.patch @@ -10,10 +10,26 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c #include #include "generic.h" -@@ -86,6 +87,95 @@ static struct platform_device gum_audio_ +@@ -86,6 +87,89 @@ static struct platform_device gum_audio_ .id = -1, }; ++ ++#if defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C) ++static void gumstix_lcd_backlight(int on_or_off) ++{ ++ if(on_or_off) ++ { ++ pxa_gpio_mode(17 | GPIO_IN); ++ } else { ++ GPCR(17) = GPIO_bit(17); ++ pxa_gpio_mode(17 | GPIO_OUT); ++ GPCR(17) = GPIO_bit(17); ++ } ++} ++#endif ++ ++ +#ifdef CONFIG_FB_PXA_ALPS_CDOLLAR +static struct pxafb_mode_info gumstix_fb_mode = { + .pixclock = 300000, @@ -50,17 +66,6 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c + .sync = 0, // Hsync and Vsync both active low +}; + -+static void gumstix_lcd_backlight(int on_or_off) -+{ -+ pxa_gpio_mode(17 | GPIO_OUT); -+ if(on_or_off) -+ { -+ GPSR(17) = GPIO_bit(17); -+ } else { -+ GPCR(17) = GPIO_bit(17); -+ } -+} -+ +static struct pxafb_mach_info gumstix_fb_info = { + .modes = &gumstix_fb_mode, + .num_modes = 1, @@ -83,17 +88,6 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c + .sync = 0, // Hsync and Vsync both active low +}; + -+static void gumstix_lcd_backlight(int on_or_off) -+{ -+ pxa_gpio_mode(17 | GPIO_OUT); -+ if(on_or_off) -+ { -+ GPSR(17) = GPIO_bit(17); -+ } else { -+ GPCR(17) = GPIO_bit(17); -+ } -+} -+ +static struct pxafb_mach_info gumstix_fb_info = { + .modes = &gumstix_fb_mode, + .num_modes = 1, @@ -106,7 +100,7 @@ Index: linux-2.6.21gum/arch/arm/mach-pxa/gumstix.c static struct platform_device *devices[] __initdata = { &gum_audio_device, }; -@@ -94,6 +184,9 @@ static void __init gumstix_init(void) +@@ -94,6 +178,9 @@ static void __init gumstix_init(void) { pxa_set_mci_info(&gumstix_mci_platform_data); pxa_set_udc_info(&gumstix_udc_info); diff --git a/packages/linux/linux-2.6.21/smc911x-fixup.patch b/packages/linux/linux-2.6.21/smc911x-fixup.patch new file mode 100644 index 0000000000..c0b7574d3a --- /dev/null +++ b/packages/linux/linux-2.6.21/smc911x-fixup.patch @@ -0,0 +1,392 @@ +Index: linux-2.6.21gum/drivers/net/smc911x.c +=================================================================== +--- linux-2.6.21gum.orig/drivers/net/smc911x.c ++++ linux-2.6.21gum/drivers/net/smc911x.c +@@ -76,6 +76,7 @@ static const char version[] = + #include + #include + ++#include + #include + #include + +@@ -303,14 +304,14 @@ static void smc911x_reset(struct net_dev + SMC_SET_AFC_CFG(lp->afc_cfg); + + +- /* Set to LED outputs */ +- SMC_SET_GPIO_CFG(0x70070000); ++ /* Set to LED outputs and configure EEPROM pins as GP outputs */ ++ SMC_SET_GPIO_CFG(GPIO_CFG_LED1_EN_ | GPIO_CFG_LED2_EN_ | 1 << 20); + + /* +- * Deassert IRQ for 1*10us for edge type interrupts ++ * Deassert IRQ for 22*10us for edge type interrupts + * and drive IRQ pin push-pull + */ +- SMC_SET_IRQ_CFG( (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ ); ++ SMC_SET_IRQ_CFG( (22 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ ); + + /* clear anything saved */ + if (lp->pending_tx_skb != NULL) { +@@ -413,7 +414,7 @@ static inline void smc911x_drop_pkt(stru + if (fifo_count <= 4) { + /* Manually dump the packet data */ + while (fifo_count--) +- SMC_GET_RX_FIFO(); ++ (void)SMC_GET_RX_FIFO(); + } else { + /* Fast forward through the bad packet */ + SMC_SET_RX_DP_CTRL(RX_DP_CTRL_FFWD_BUSY_); +@@ -499,7 +500,7 @@ static inline void smc911x_rcv(struct n + SMC_SET_RX_CFG(RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_)); + SMC_PULL_DATA(data, pkt_len+2+3); + +- DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name,); ++ DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name); + PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64); + dev->last_rx = jiffies; + skb->dev = dev; +@@ -900,6 +901,7 @@ static void smc911x_phy_powerdown(struct + unsigned long ioaddr = dev->base_addr; + unsigned int bmcr; + ++ DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + /* Enter Link Disable state */ + SMC_GET_PHY_BMCR(phy, bmcr); + bmcr |= BMCR_PDOWN; +@@ -925,6 +927,7 @@ static void smc911x_phy_check_media(stru + + if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) { + /* duplex state has changed */ ++ DBG(SMC_DEBUG_MISC, "%s: duplex state has changed\n", dev->name); + SMC_GET_PHY_BMCR(phyaddr, bmcr); + SMC_GET_MAC_CR(cr); + if (lp->mii.full_duplex) { +@@ -960,6 +963,7 @@ static void smc911x_phy_configure(struct + int my_phy_caps; /* My PHY capabilities */ + int my_ad_caps; /* My Advertised capabilities */ + int status; ++ int bmcr; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __FUNCTION__); +@@ -1033,9 +1037,12 @@ static void smc911x_phy_configure(struct + + DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps); + DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps); ++ DBG(SMC_DEBUG_MISC, "%s: phy advertised readback caps=0x%04x\n", dev->name, status); + + /* Restart auto-negotiation process in order to advertise my caps */ +- SMC_SET_PHY_BMCR(phyaddr, BMCR_ANENABLE | BMCR_ANRESTART); ++ SMC_GET_PHY_BMCR(phyaddr, bmcr); ++ bmcr |= BMCR_ANENABLE | BMCR_ANRESTART; ++ SMC_SET_PHY_BMCR(phyaddr, bmcr); + + smc911x_phy_check_media(dev, 1); + +@@ -1888,6 +1895,39 @@ static int __init smc911x_findirq(unsign + return probe_irq_off(cookie); + } + ++static inline unsigned int is_gumstix_oui(u8 *addr) ++{ ++ return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9); ++} ++ ++/** ++ * gen_serial_ether_addr - Generate software assigned Ethernet address ++ * based on the system_serial number ++ * @addr: Pointer to a six-byte array containing the Ethernet address ++ * ++ * Generate an Ethernet address (MAC) that is not multicast ++ * and has the local assigned bit set, keyed on the system_serial ++ */ ++static inline void gen_serial_ether_addr(u8 *addr) ++{ ++ static u8 ether_serial_digit = 0; ++ addr [0] = system_serial_high >> 8; ++ addr [1] = system_serial_high; ++ addr [2] = system_serial_low >> 24; ++ addr [3] = system_serial_low >> 16; ++ addr [4] = system_serial_low >> 8; ++ addr [5] = (system_serial_low & 0xc0) | /* top bits are from system serial */ ++ (1 << 4) | /* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */ ++ ((ether_serial_digit++) & 0x0f); /* 15 possible interfaces of each type */ ++ ++ if(!is_gumstix_oui(addr)) ++ { ++ addr [0] &= 0xfe; /* clear multicast bit */ ++ addr [0] |= 0x02; /* set local assignment bit (IEEE802) */ ++ } ++} ++ ++ + /* + * Function: smc911x_probe(unsigned long ioaddr) + * +@@ -2116,15 +2156,13 @@ static int __init smc911x_probe(struct n + #endif + printk("\n"); + if (!is_valid_ether_addr(dev->dev_addr)) { +- printk("%s: Invalid ethernet MAC address. Please " +- "set using ifconfig\n", dev->name); +- } else { +- /* Print the Ethernet address */ +- printk("%s: Ethernet addr: ", dev->name); +- for (i = 0; i < 5; i++) +- printk("%2.2x:", dev->dev_addr[i]); +- printk("%2.2x\n", dev->dev_addr[5]); ++ gen_serial_ether_addr(dev->dev_addr); + } ++ /* Print the Ethernet address */ ++ printk("%s: Ethernet addr: ", dev->name); ++ for (i = 0; i < 5; i++) ++ printk("%2.2x:", dev->dev_addr[i]); ++ printk("%2.2x\n", dev->dev_addr[5]); + + if (lp->phy_type == 0) { + PRINTK("%s: No PHY found\n", dev->name); +@@ -2300,8 +2338,15 @@ static struct platform_driver smc911x_dr + }, + }; + ++#ifdef CONFIG_ARCH_GUMSTIX ++extern void gumstix_smc911x_load(void); ++#endif ++ + static int __init smc911x_init(void) + { ++#ifdef CONFIG_ARCH_GUMSTIX ++ gumstix_smc911x_load(); ++#endif + return platform_driver_register(&smc911x_driver); + } + +Index: linux-2.6.21gum/drivers/net/gumstix-smc911x.c +=================================================================== +--- /dev/null ++++ linux-2.6.21gum/drivers/net/gumstix-smc911x.c +@@ -0,0 +1,148 @@ ++/* ++ * Gumstix SMC911x chip intialization driver ++ * ++ * Author: Craig Hughes ++ * Created: December 9, 2004 ++ * Copyright: (C) 2004 Craig Hughes ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++ ++#define SMC_DEBUG 9 ++#include ++#include "smc911x.h" ++ ++static struct resource gumstix_smc911x0_resources[] = { ++ [0] = { ++ .name = "smc911x-regs", ++ .start = PXA_CS1_PHYS, ++ .end = PXA_CS1_PHYS + 0x000fffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = GUMSTIX_ETH0_IRQ, ++ .end = GUMSTIX_ETH0_IRQ, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct resource gumstix_smc911x1_resources[] = { ++ [0] = { ++ .name = "smc911x-regs", ++ .start = PXA_CS2_PHYS, ++ .end = PXA_CS2_PHYS + 0x000fffff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = GUMSTIX_ETH1_IRQ, ++ .end = GUMSTIX_ETH1_IRQ, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device gumstix_smc911x0_device = { ++ .name = "smc911x", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(gumstix_smc911x0_resources), ++ .resource = gumstix_smc911x0_resources, ++}; ++ ++static struct platform_device gumstix_smc911x1_device = { ++ .name = "smc911x", ++ .id = 1, ++ .num_resources = ARRAY_SIZE(gumstix_smc911x1_resources), ++ .resource = gumstix_smc911x1_resources, ++}; ++ ++static struct platform_device *smc911x_devices[] = { ++ &gumstix_smc911x0_device, ++ &gumstix_smc911x1_device, ++}; ++ ++/* First we're going to test if there's a 2nd SMC911x, and if not, then we'll free up those resources and the GPIO lines ++ * that it would otherwise use. We have no choice but to probe by doing: ++ * Set nCS2 to CS2 mode ++ * Set the reset line to GPIO out mode, and pull it high, then drop it low (to trigger reset) ++ * Read from the memory space to check for the sentinel sequence identifying a likely SMC911x device ++ */ ++int __init gumstix_smc911x_init(void) ++{ ++ unsigned int val, num_devices=ARRAY_SIZE(smc911x_devices); ++ void *ioaddr; ++ ++ /* Set up nPWE */ ++ pxa_gpio_mode(GPIO49_nPWE_MD); ++ ++ pxa_gpio_mode(GPIO78_nCS_2_MD); ++ // If either if statement fails, then we'll drop out and turn_off_eth1, ++ // if both succeed, then we'll skip that and just proceed with 2 cards ++ if(request_mem_region(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT, "smc911x probe")) ++ { ++ ioaddr = ioremap(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT); ++ val = SMC_GET_PN(); ++ iounmap(ioaddr); ++ release_mem_region(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT); ++ if (CHIP_9115 == val || ++ CHIP_9116 == val || ++ CHIP_9117 == val || ++ CHIP_9118 == val ) { ++ goto proceed; ++ } ++ } ++ ++turn_off_eth1: ++ // This is apparently not an SMC911x ++ // So, let's decrement the number of devices to request, and reset the GPIO lines to GPIO IN mode ++ num_devices--; ++ smc911x_devices[1] = NULL; ++ pxa_gpio_mode(78 | GPIO_IN); ++ ++proceed: ++ pxa_gpio_mode(GPIO15_nCS_1_MD); ++ ++ if(smc911x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD); ++ pxa_gpio_mode(GPIO_GUMSTIX_ETH0_RST_MD); ++ ++ if(smc911x_devices[1]) GPCR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST); ++ GPCR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST); ++ msleep(500); // Hold RESET for at least 200µ ++ ++ if(smc911x_devices[1]) GPSR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST); ++ GPSR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST); ++ msleep(50); ++ ++ return platform_add_devices(smc911x_devices, num_devices); ++} ++ ++void __exit gumstix_smc911x_exit(void) ++{ ++ if(smc911x_devices[1] != NULL) platform_device_unregister(&gumstix_smc911x1_device); ++ platform_device_unregister(&gumstix_smc911x0_device); ++} ++ ++void gumstix_smc911x_load(void) {} ++EXPORT_SYMBOL(gumstix_smc911x_load); ++ ++module_init(gumstix_smc911x_init); ++module_exit(gumstix_smc911x_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Craig Hughes "); ++MODULE_DESCRIPTION("Gumstix board SMC911x chip initialization driver"); ++MODULE_VERSION("1:0.1"); +Index: linux-2.6.21gum/drivers/net/Kconfig +=================================================================== +--- linux-2.6.21gum.orig/drivers/net/Kconfig ++++ linux-2.6.21gum/drivers/net/Kconfig +@@ -897,6 +897,13 @@ config SMC911X + called smc911x. If you want to compile it as a module, say M + here and read + ++config SMC911X_GUMSTIX ++ tristate ++ default m if SMC911X=m ++ default y if SMC911X=y ++ depends on SMC911X && ARCH_GUMSTIX ++ ++ + config NET_VENDOR_RACAL + bool "Racal-Interlan (Micom) NI cards" + depends on NET_ETHERNET && ISA +Index: linux-2.6.21gum/drivers/net/Makefile +=================================================================== +--- linux-2.6.21gum.orig/drivers/net/Makefile ++++ linux-2.6.21gum/drivers/net/Makefile +@@ -201,6 +201,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o + obj-$(CONFIG_MACB) += macb.o + + obj-$(CONFIG_SMC91X_GUMSTIX) += gumstix-smc91x.o ++obj-$(CONFIG_SMC911X_GUMSTIX) += gumstix-smc911x.o + obj-$(CONFIG_ARM) += arm/ + obj-$(CONFIG_DEV_APPLETALK) += appletalk/ + obj-$(CONFIG_TR) += tokenring/ +Index: linux-2.6.21gum/include/asm-arm/arch-pxa/gumstix.h +=================================================================== +--- linux-2.6.21gum.orig/include/asm-arm/arch-pxa/gumstix.h ++++ linux-2.6.21gum/include/asm-arm/arch-pxa/gumstix.h +@@ -52,7 +52,7 @@ + #define GPIO_GUMSTIX_ETH0_RST 80 + #define GPIO_GUMSTIX_ETH0 36 + #else +-#define GPIO_GUMSTIX_ETH0_RST 32 ++#define GPIO_GUMSTIX_ETH0_RST 107 + #define GPIO_GUMSTIX_ETH0 99 + #endif + #define GPIO_GUMSTIX_ETH1_RST 52 +Index: linux-2.6.21gum/drivers/net/smc911x.h +=================================================================== +--- linux-2.6.21gum.orig/drivers/net/smc911x.h ++++ linux-2.6.21gum/drivers/net/smc911x.h +@@ -33,7 +33,9 @@ + * Use the DMA feature on PXA chips + */ + #ifdef CONFIG_ARCH_PXA ++#ifndef CONFIG_SMC911X_GUMSTIX + #define SMC_USE_PXA_DMA 1 ++#endif + #define SMC_USE_16BIT 0 + #define SMC_USE_32BIT 1 + #endif +@@ -46,13 +48,13 @@ + #if SMC_USE_16BIT + #define SMC_inb(a, r) readb((a) + (r)) + #define SMC_inw(a, r) readw((a) + (r)) +-#define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw(a+2, r)<<16)) ++#define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw((a)+2, r)<<16)) + #define SMC_outb(v, a, r) writeb(v, (a) + (r)) + #define SMC_outw(v, a, r) writew(v, (a) + (r)) + #define SMC_outl(v, a, r) \ + do{ \ +- writel(v & 0xFFFF, (a) + (r)); \ +- writel(v >> 16, (a) + (r) + 2); \ ++ writel((v) & 0xFFFF, (a) + (r)); \ ++ writel((v) >> 16, (a) + (r) + 2); \ + } while (0) + #define SMC_insl(a, r, p, l) readsw((short*)((a) + (r)), p, l*2) + #define SMC_outsl(a, r, p, l) writesw((short*)((a) + (r)), p, l*2) -- cgit v1.2.3 From 83ed84ce4985db7354cdf8cef5389af4144eadd0 Mon Sep 17 00:00:00 2001 From: Philip Balister Date: Wed, 3 Oct 2007 23:35:22 +0000 Subject: gumstix-verdex : Add support for wired network interface on netwifimicroSD card. --- packages/linux/linux-2.6.21/gumstix-verdex/defconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'packages/linux/linux-2.6.21') diff --git a/packages/linux/linux-2.6.21/gumstix-verdex/defconfig b/packages/linux/linux-2.6.21/gumstix-verdex/defconfig index 9107cd0d7c..c6d5480089 100644 --- a/packages/linux/linux-2.6.21/gumstix-verdex/defconfig +++ b/packages/linux/linux-2.6.21/gumstix-verdex/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.21 -# Thu Sep 13 14:49:02 2007 +# Wed Oct 3 16:35:16 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -828,7 +828,8 @@ CONFIG_MII=m CONFIG_SMC91X=m CONFIG_SMC91X_GUMSTIX=m # CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set +CONFIG_SMC911X=m +CONFIG_SMC911X_GUMSTIX=m # # Ethernet (1000 Mbit) -- cgit v1.2.3