From 709c4d66e0b107ca606941b988bad717c0b45d9b Mon Sep 17 00:00:00 2001 From: Denys Dmytriyenko Date: Tue, 17 Mar 2009 14:32:59 -0400 Subject: rename packages/ to recipes/ per earlier agreement See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko Acked-by: Mike Westerhof Acked-by: Philip Balister Acked-by: Khem Raj Acked-by: Marcin Juszkiewicz Acked-by: Koen Kooi Acked-by: Frans Meulenbroeks --- packages/i2c/files/Config.h | 41 --- packages/i2c/files/Crc8.c | 149 --------- packages/i2c/files/Crc8.h | 54 --- packages/i2c/files/DumpMem.c | 93 ------ packages/i2c/files/DumpMem.h | 49 --- packages/i2c/files/Log.c | 335 ------------------- packages/i2c/files/Log.h | 232 ------------- packages/i2c/files/i2c-api.c | 522 ----------------------------- packages/i2c/files/i2c-api.h | 143 -------- packages/i2c/files/i2c-dev.h | 365 --------------------- packages/i2c/files/i2c-io-api.h | 52 --- packages/i2c/files/i2c-io.h | 220 ------------- packages/i2c/files/i2c.c | 710 ---------------------------------------- packages/i2c/files/i2c.h | 135 -------- packages/i2c/files/i2c.init | 37 --- packages/i2c/i2c.bb | 45 --- 16 files changed, 3182 deletions(-) delete mode 100644 packages/i2c/files/Config.h delete mode 100644 packages/i2c/files/Crc8.c delete mode 100644 packages/i2c/files/Crc8.h delete mode 100644 packages/i2c/files/DumpMem.c delete mode 100644 packages/i2c/files/DumpMem.h delete mode 100644 packages/i2c/files/Log.c delete mode 100644 packages/i2c/files/Log.h delete mode 100644 packages/i2c/files/i2c-api.c delete mode 100644 packages/i2c/files/i2c-api.h delete mode 100644 packages/i2c/files/i2c-dev.h delete mode 100644 packages/i2c/files/i2c-io-api.h delete mode 100644 packages/i2c/files/i2c-io.h delete mode 100644 packages/i2c/files/i2c.c delete mode 100644 packages/i2c/files/i2c.h delete mode 100755 packages/i2c/files/i2c.init delete mode 100644 packages/i2c/i2c.bb (limited to 'packages/i2c') diff --git a/packages/i2c/files/Config.h b/packages/i2c/files/Config.h deleted file mode 100644 index 83bb46de84..0000000000 --- a/packages/i2c/files/Config.h +++ /dev/null @@ -1,41 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file Config.h -* -* @brief Global Configuration information. -* -****************************************************************************/ - -#if !defined( CONFIG_H ) -#define CONFIG_H /**< Include Guard */ - -/* ---- Include Files ---------------------------------------------------- */ - -/* ---- Constants and Types ---------------------------------------------- */ - -/** - * Sets Logging parameters - */ - -#define CFG_LOG_TO_BUFFER 0 - -#define CFG_CRC8BLOCK 1 - -/** @} */ - -#endif // CONFIG_H - diff --git a/packages/i2c/files/Crc8.c b/packages/i2c/files/Crc8.c deleted file mode 100644 index 87dcf5c2f4..0000000000 --- a/packages/i2c/files/Crc8.c +++ /dev/null @@ -1,149 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file Crc8.c -* -* @brief This file contains the definition of the CRC-8 algorithim -* used by SMBus -* -* -*****************************************************************************/ - -/* ---- Include Files ----------------------------------------------------- */ - -#include "Config.h" - -#include "Crc8.h" - -#include "Log.h" - -/* ---- Public Variables -------------------------------------------------- */ -/* ---- Private Constants and Types --------------------------------------- */ -/* ---- Private Variables ------------------------------------------------- */ -/* ---- Private Function Prototypes --------------------------------------- */ -/* ---- Functions --------------------------------------------------------- */ - -/****************************************************************************/ -/** -* Calculates the CRC-8 used as part of SMBus. -* -* CRC-8 is defined to be x^8 + x^2 + x + 1 -* -* To use this function use the following template: -* -* crc = Crc8( crc, data ); -*/ - -#if 0 // Traditional implementation - -#define POLYNOMIAL (0x1070U << 3) - -unsigned char Crc8( unsigned char inCrc, unsigned char inData ) -{ - int i; - unsigned short data; - - data = inCrc ^ inData; - data <<= 8; - - for ( i = 0; i < 8; i++ ) - { - if (( data & 0x8000 ) != 0 ) - { - data = data ^ POLYNOMIAL; - } - data = data << 1; - } - -#if 0 -#if defined( LogBuf2 ) - LogBuf2( "Crc8: data:0x%02x crc:0x%02x\n", inData, (unsigned char)( data >> 8 )); -#else - - Log( "Crc8: data:0x%02x crc:0x%02x\n", inData, (unsigned char)( data >> 8 )); -#endif - -#endif - - - return (unsigned char)( data >> 8 ); - -} // Crc8 - -#else // Optimized for 8 bit CPUs (0x22 bytes on ATMega128 versus 0x30 for above version) - -unsigned char Crc8( unsigned char inCrc, unsigned char inData ) -{ - unsigned char i; - unsigned char data; - - data = inCrc ^ inData; - - for ( i = 0; i < 8; i++ ) - { - if (( data & 0x80 ) != 0 ) - { - data <<= 1; - data ^= 0x07; - } - else - { - data <<= 1; - } - } - -#if 0 -#if defined( LogBuf2 ) - LogBuf2( "Crc8: data:0x%02x crc:0x%02x\n", inData, data ); -#else - - Log( "Crc8: data:0x%02x crc:0x%02x\n", inData, data ); -#endif - -#endif - - - return data; - -} // Crc8 - -#endif - - -#if defined( CFG_CRC8BLOCK ) - -/****************************************************************************/ -/** -* Calculates the CRC-8 used as part of SMBus over a block of memory. -*/ - -uint8_t Crc8Block( uint8_t crc, uint8_t *data, uint8_t len ) -{ - while ( len > 0 ) - { - crc = Crc8( crc, *data++ ); - len--; - } - - return crc; - -} // Crc8Block - -#endif // CFG_CRC8BLOCK - -/** @} */ - - diff --git a/packages/i2c/files/Crc8.h b/packages/i2c/files/Crc8.h deleted file mode 100644 index 2d1f74b82c..0000000000 --- a/packages/i2c/files/Crc8.h +++ /dev/null @@ -1,54 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file Crc8.h -* -* @brief This file contains the definition of the CRC-8 algorithim -* used by SMBus -* -****************************************************************************/ - -#if !defined( CRC8_H ) -#define CRC_H ///< Include Guard - -/* ---- Include Files ----------------------------------------------------- */ - -#include - -#if defined( __cplusplus ) -extern "C" -{ -#endif - - -/* ---- Constants and Types ---------------------------------------------- */ -/* ---- Variable Externs ------------------------------------------------- */ -/* ---- Function Prototypes ---------------------------------------------- */ - -uint8_t Crc8( uint8_t crc, uint8_t data ); - -uint8_t Crc8Block( uint8_t crc, uint8_t *data, uint8_t len ); - - -#if defined( __cplusplus ) -} -#endif - - -/** @} */ - -#endif // CRC8_H - diff --git a/packages/i2c/files/DumpMem.c b/packages/i2c/files/DumpMem.c deleted file mode 100644 index e13e94b0f8..0000000000 --- a/packages/i2c/files/DumpMem.c +++ /dev/null @@ -1,93 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file DumpMem.c -* -* @brief Memmory dump routine -* -****************************************************************************/ - -// ---- Include Files ------------------------------------------------------- - -#include -#include "DumpMem.h" -#include "Log.h" - -// ---- Public Variables ---------------------------------------------------- -// ---- Private Constants and Types ----------------------------------------- -// ---- Private Variables --------------------------------------------------- -// ---- Private Function Prototypes ----------------------------------------- -// ---- Functions ----------------------------------------------------------- - -/**************************************************************************/ -/** -* Dumps a page of output for debugging purposes. -*/ - -void DumpMem( const char *prefix, unsigned address, const void *inData, unsigned numBytes ) -{ - const uint8_t *data = (const uint8_t *)inData; - unsigned byteOffset; - - if ( numBytes == 0 ) - { - Log( "%s: No data\n", prefix ); - return; - } - -#define LINE_WIDTH 16 - - for ( byteOffset = 0; byteOffset < numBytes; byteOffset += LINE_WIDTH ) - { - unsigned i; - - Log( "%s: %04x: ", prefix, address + byteOffset ); - - for ( i = 0; i < LINE_WIDTH; i++ ) - { - if (( byteOffset + i ) < numBytes ) - { - Log( "%02.2X ", data[ byteOffset + i ] ); - } - else - { - Log( " " ); - } - } - for ( i = 0; i < LINE_WIDTH; i++ ) - { - if (( byteOffset + i ) < numBytes ) - { - unsigned char ch = data[ byteOffset + i ]; - if (( ch < ' ' ) || ( ch > '~' )) - { - Log( "." ); - } - else - { - Log( "%c", ch ); - } - } - else - { - break; - } - } - Log( "\n" ); - } - -} // DumpMem - diff --git a/packages/i2c/files/DumpMem.h b/packages/i2c/files/DumpMem.h deleted file mode 100644 index 5d536f49e8..0000000000 --- a/packages/i2c/files/DumpMem.h +++ /dev/null @@ -1,49 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file DumpMem.h -* -* @brief Debug routine for dumping memory -* -****************************************************************************/ - -#if !defined( DUMPMEM_H ) -#define DUMPMEM_H ///< Include Guard - -// ---- Include Files ------------------------------------------------------- - -/** - * @addtogroup Log - * @{ - */ - -#if defined( __cplusplus ) -extern "C" -{ -#endif - - -void DumpMem( const char *prefix, unsigned address, const void *data, unsigned numBytes ); - -#if defined( __cplusplus ) -} -#endif - - -/** @} */ - -#endif // DUMPMEM_H - diff --git a/packages/i2c/files/Log.c b/packages/i2c/files/Log.c deleted file mode 100644 index e32783391b..0000000000 --- a/packages/i2c/files/Log.c +++ /dev/null @@ -1,335 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file Log.cpp -* -* @brief This file contains the implementation of the logging functions. -* -****************************************************************************/ - -// ---- Include Files ------------------------------------------------------- - -#include "Log.h" - -#if CFG_LOG_USE_STDIO -# include -#else - -# include "Str.h" -# include "UART.h" -#endif - - -// ---- Public Variables ---------------------------------------------------- -// ---- Private Constants and Types ----------------------------------------- - -#if defined( AVR ) - -#undef Log -#undef LogError -#undef vLog - -#define Log Log_P -#define LogError LogError_P -#define vLog vLog_P -#define LogBuf LogBuf_P - -#define char prog_char - -#else - - -#define PSTR(str) str - -int gVerbose = 0; -int gDebug = 0; -int gQuiet = 0; - -#endif - - -#if CFG_LOG_TO_BUFFER - -volatile LOG_Buffer_t LOG_gBuffer; - -#endif - - -// ---- Private Variables --------------------------------------------------- - -#if CFG_LOG_USE_STDIO - -FILE *gLogFs = NULL; - -#endif - - -// ---- Private Function Prototypes ----------------------------------------- - -// ---- Functions ----------------------------------------------------------- - -/** - * @addtogroup Log - * @{ - */ - -#if !defined( AVR ) - -void DefaultLogFunc( int logLevel, const char *fmt, va_list args ) -{ - FILE *fs; - - if ( gQuiet && ( logLevel == LOG_LEVEL_NORMAL )) - { - return; - } - - if ( gLogFs == NULL ) - { - fs = stderr; - } - else - { - fs = gLogFs; - } - - if ( logLevel == LOG_LEVEL_ERROR ) - { - fprintf( fs, "ERROR: " ); - } - vfprintf( fs, fmt, args ); - fflush( fs ); - -} // DefaultLogFunc - -static LogFunc_t gLogFunc = DefaultLogFunc; - -void SetLogFunc( LogFunc_t logFunc ) -{ - - gLogFunc = logFunc; - -} // SetLogFunc - -#endif - - -//*************************************************************************** -/** -* Sets the logging stream -*/ - -#if CFG_LOG_USE_STDIO -void LogInit( FILE *logFs ) -{ - gLogFs = logFs; - -} // LogInit - -#else - - -static int LogToUartFunc( void *outParm, int ch ) -{ - UART0_PutChar( ch ); - - return 1; -} -#endif - - -//*************************************************************************** -/** -* Logs a string using printf like semantics -*/ - -void Log -( - const char *fmt, ///< printf style format specifier - ... ///< variable list of arguments -) -{ - va_list args; - - va_start( args, fmt ); - vLog( fmt, args ); - va_end( args ); -} - -//*************************************************************************** -/** -* Logs a string using printf like semantics -*/ - -void vLog -( - const char *fmt, ///< printf style format specified - va_list args ///< variable list of arguments -) -{ - // For now we call printf directly. A better way would be to install - // a callback which does the real work - -#if defined( AVR ) -# if CFG_LOG_USE_STDIO - if ( gLogFs != NULL ) - { - vfprintf_P( gLogFs, fmt, args ); - } -# else - - vStrXPrintf_P( LogToUartFunc, NULL, fmt, args ); -# endif - -#else - - if ( gLogFunc != NULL ) - { - gLogFunc( LOG_LEVEL_NORMAL, fmt, args ); - } -#endif - -} - -#if !defined( AVR ) - -//*************************************************************************** -/** -* Logs an error. -*/ - -void vLogError -( - const char *fmt, ///< printf style format specified - va_list args ///< variable list of arguments -) -{ - if ( gLogFunc != NULL ) - { - gLogFunc( LOG_LEVEL_ERROR, fmt, args ); - } -} - -#endif - - -/***************************************************************************/ -/** -* Logs an error -*/ - -void LogError -( - const char *fmt, ///< printf style format specifier - ... ///< variable list of arguments -) -{ - va_list args; - -#if defined( AVR ) - //Log( "ERROR: " ); - //Log_P( PSTR( "ERROR: " )); - - va_start( args, fmt ); - vLog( fmt, args ); - va_end( args ); -#else - - va_start( args, fmt ); - vLogError( fmt, args ); - va_end( args ); -#endif - - -} // LogError - -/***************************************************************************/ -/** -* Logs an entry to the log buffer -*/ - -#if CFG_LOG_TO_BUFFER - -void LogBuf( const char *fmt, uint8_t arg1, uint8_t arg2 LOG_EXTRA_PARAMS_DECL ) -{ -#if defined( AVR ) - uint8_t sreg = SREG; - cli(); -#endif - - - if ( CBUF_IsFull( LOG_gBuffer )) - { - volatile LOG_Entry_t *entry = CBUF_GetLastEntryPtr( LOG_gBuffer ); - - entry->fmt = PSTR( "*** Lost Messages ***\n" ); - } - else - { - volatile LOG_Entry_t *entry = CBUF_GetPushEntryPtr( LOG_gBuffer ); - - entry->fmt = fmt; - entry->param1 = arg1; - entry->param2 = arg2; - -#if CFG_LOG_EXTRA_PARAMS - entry->param3 = arg3; - entry->param4 = arg4; -#endif - - - CBUF_AdvancePushIdx( LOG_gBuffer ); - } - -#if defined( AVR ) - SREG = sreg; -#endif - - -} // LogBuf - -#endif // CFG_LOG_TO_BUFFER - -/***************************************************************************/ -/** -* Dumps any unlogged entries from the log buffer -*/ - -#if CFG_LOG_TO_BUFFER - -void LogBufDump( void ) -{ - while ( !CBUF_IsEmpty( LOG_gBuffer )) - { - volatile LOG_Entry_t *entry = CBUF_GetPopEntryPtr( LOG_gBuffer ); - -#if CFG_LOG_EXTRA_PARAMS - Log( entry->fmt, entry->param1, entry->param2, entry->param3, entry->param4 ); -#else - - Log( entry->fmt, entry->param1, entry->param2 ); -#endif - - - CBUF_AdvancePopIdx( LOG_gBuffer ); - } - -} // LogBufDump - -#endif // CFG_LOG_TO_BUFFER - -/** @} */ - diff --git a/packages/i2c/files/Log.h b/packages/i2c/files/Log.h deleted file mode 100644 index d12d482fc6..0000000000 --- a/packages/i2c/files/Log.h +++ /dev/null @@ -1,232 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file Log.h -* -* @brief Contains some logging macros. -* -****************************************************************************/ -/** -* @defgroup Log Logging -* -* @brief Provides a common interface for logging. -* -****************************************************************************/ - -#if !defined( LOG_H ) -#define LOG_H ///< Include Guard - -// ---- Include Files ------------------------------------------------------- - -#include -#include - -#if !defined( CONFIG_H ) -# include "Config.h" -#endif - -#if !defined( CFG_LOG_USE_STDIO ) -# define CFG_LOG_USE_STDIO 1 -#endif - - -#if defined( AVR ) -# include -# include -#endif - - -#if CFG_LOG_TO_BUFFER -# if !defined( CBUF_H ) -# include "CBUF.h" -# endif - -#endif - - - -/** - * @addtogroup Log - * @{ - */ - -#if !defined( CFG_LOG_ENABLED ) -# define CFG_LOG_ENABLED 1 -#endif - - -#if !CFG_LOG_ENABLED - -#define Log( fmt, args... ) -#define LogError( fmt, args... ) - -#else - - -#if defined( __cplusplus ) -extern "C" -{ -#endif - - -/*************************************************************************** -* -* Log Buffer support -*/ - -#if CFG_LOG_TO_BUFFER - -#if defined( AVR ) - -typedef struct -{ - const prog_char *fmt; - uint8_t param1; - uint8_t param2; -#if CFG_LOG_EXTRA_PARAMS - uint8_t param3; - uint8_t param4; -#endif - - -} LOG_Entry_t; - -#if CFG_LOG_EXTRA_PARAMS -# define LOG_EXTRA_PARAMS_DECL , uint8_t arg3, uint8_t arg4 -# define LOG_EXTRA_PARAMS , 0, 0 -#else - -# define LOG_EXTRA_PARAMS_DECL -# define LOG_EXTRA_PARAMS -#endif - - -void LogBuf_P( const prog_char *fmt, uint8_t arg1, uint8_t arg2 LOG_EXTRA_PARAMS_DECL ); - -#define LogBuf0( fmt ) LogBuf_P( PSTR( fmt ), 0, 0 LOG_EXTRA_PARAMS ) -#define LogBuf1( fmt, arg1 ) LogBuf_P( PSTR( fmt ), arg1, 0 LOG_EXTRA_PARAMS ) -#define LogBuf2( fmt, arg1, arg2 ) LogBuf_P( PSTR( fmt ), arg1, arg2 LOG_EXTRA_PARAMS ) - -#if CFG_LOG_EXTRA_PARAMS -#define LogBuf3( fmt, arg1, arg2, arg3 ) LogBuf_P( PSTR( fmt ), arg1, arg2, arg3, 0 ) -#define LogBuf4( fmt, arg1, arg2, arg3, arg4 ) LogBuf_P( PSTR( fmt ), arg1, arg2, arg3, arg4 ) -#endif - - -#else - - -typedef struct -{ - const char *fmt; - uint8_t param1; - uint8_t param2; - -} LOG_Entry_t; - -void LogBuf( const char *fmt, uint8_t arg1, uint8_t arg2 ); - -#define LogBuf0( fmt, arg1 ) LogBuf( fmt, 0, 0 ) -#define LogBuf1( fmt, arg1 ) LogBuf( fmt, arg1, 0 ) -#define LogBuf2( fmt, arg1, arg2 ) LogBuf( fmt, arg1, arg2 ) - -#endif // AVR - -#if ( CFG_LOG_NUM_BUFFER_ENTRIES > 128 ) -typedef uint16_t LOG_BufferIdx_t; -#else - -typedef uint8_t LOG_BufferIdx_t; -#endif - - -typedef struct -{ - LOG_BufferIdx_t m_getIdx; - LOG_BufferIdx_t m_putIdx; - LOG_Entry_t m_entry[ CFG_LOG_NUM_BUFFER_ENTRIES ]; - -} LOG_Buffer_t; - -extern volatile LOG_Buffer_t LOG_gBuffer; - -#define LOG_gBuffer_SIZE ( sizeof( LOG_gBuffer.m_entry ) / sizeof( LOG_gBuffer.m_entry[ 0 ] )) - -void LogBufDump( void ); - -#endif // CFG_LOG_TO_BUFFER - -/*************************************************************************** -* -* Regular logging support -*/ - -#if CFG_LOG_USE_STDIO -extern FILE *gLogFs; - -void LogInit( FILE *logFs ); -#endif - - -#if defined( AVR ) - -void Log_P( const prog_char *fmt, ... ); -void LogError_P( const prog_char *fmt, ... ); -void vLog_P( const prog_char *fmt, va_list args ); - -#define Log( fmt, args... ) Log_P( PSTR( fmt ), ## args ) -#define LogError( fmt, args... ) LogError_P( PSTR( fmt ), ## args ) -#define vLog( fmt, va_list, args ) vLog_P( PSTR( fmt ), args ) - -#else // AVR - -#define LOG_LEVEL_NORMAL 0 -#define LOG_LEVEL_ERROR 1 - -typedef void (*LogFunc_t)( int logLevel, const char *fmt, va_list args ); - -extern int gVerbose; -extern int gDebug; -extern int gQuiet; - -void Log( const char *fmt, ... ); -void LogError( const char *fmt, ... ); -void vLog( const char *fmt, va_list args ); -void vLogError( const char *fmt, va_list args ); - -#define Log_P( fmt, args... ) Log( fmt, ## args ) -#define LogError_P( fmt, args... ) LogError( fmt, ## args ) -#define vLog_P( fmt, args ) vLog( fmt, args ) - -#define LogDebug( fmt, args... ) do { if ( gDebug ) { Log( fmt, ## args ); }} while (0) -#define LogVerbose( fmt, args... ) do { if ( gVerbose ) { Log( fmt, ## args ); }} while (0) - -void SetLogFunc( LogFunc_t logFunc ); -void DefaultLogFunc( int logLevel, const char *fmt, va_list args ); - -#endif // AVR - -#if defined( __cplusplus ) -} -#endif - - -#endif // CFG_LOG_ENABLED - -/** @} */ - -#endif // LOG_H - diff --git a/packages/i2c/files/i2c-api.c b/packages/i2c/files/i2c-api.c deleted file mode 100644 index cfc41565a4..0000000000 --- a/packages/i2c/files/i2c-api.c +++ /dev/null @@ -1,522 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file i2c-api.c -* -* @brief This file contains the implementation for performing I2C operations -* on the gumstix. -* -****************************************************************************/ - -// ---- Include Files ------------------------------------------------------- - -#include -#include - -#include "i2c.h" -#include "i2c-dev.h" -#include "i2c-api.h" - -#include "Crc8.h" -#include "DumpMem.h" -#include "Log.h" - -// ---- Public Variables ---------------------------------------------------- - -// ---- Private Constants and Types ----------------------------------------- - -// ---- Private Variables --------------------------------------------------- - -static I2C_Addr_t gI2cAddr; -static int gUseCrc; - -// ---- Private Function Prototypes ----------------------------------------- - -// ---- Functions ----------------------------------------------------------- - -//*************************************************************************** -/** -* -* Sets the I2C address that we'll be communicating with, as well as whether -* the device uses smbus PEC (CRC). -*/ - -void I2cSetSlaveAddress( int i2cDev, I2C_Addr_t i2cAddr, int useCrc ) -{ - gI2cAddr = i2cAddr; - gUseCrc = useCrc; - - LogDebug( "----- I2cSetSlaveAddress i2cAddr:0x%02x useCrc:%d -----\n", - i2cAddr, useCrc ); - - // Indicate which slave we wish to speak to - - if ( ioctl( i2cDev, I2C_SLAVE, gI2cAddr ) < 0 ) - { - LogError( "I2cSetSlaveAddress: Error trying to set slave address to 0x%02x (%d %s)\n", - gI2cAddr, errno, strerror( errno )); - } - - // We do the CRC calculation ourself, so we don't need to tell the driver - // that we're using it. - -#if 0 - // Indicate that we use PEC (aka CRCs) - - if ( ioctl( i2cDev, I2C_PEC, 1 ) < 0 ) - { - LogError( "I2cSetSlaveAddress: Error trying to set PEC mode\n" ); - } -#endif - -} // I2cSetSlaveAddress - -//*************************************************************************** -/** -* Transfer data to/from an i2c device. -* -* This function implements the equivalent of the smbus functions using -* I2C_RDWR. -* -* The PXA driver doesn't support the smbus transfers. -* -* This function can perform the following SMBUS transactions: -* -* Write Byte: wrLen == 1, rdLen == 0 -* Read Byte: wrLen == 0, rdLen == 1 -* Write Word: wrLen == 2, rdLen == 0 -* Read Word: wrLen == 0, rdLen == 2 -* Process Call: wrLen == 2, rdLen == 2 -* Write Block: wrLen == 0x80 + numBytes, rdLen == 0 -* Read Block: wrLen == 0, rdLen == 0x80 + numBytes -* Process Block: wrLen == 0x80 + numBytes, rdLen == 0x80 + numBytes -*/ - -int I2cTransfer -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrData, ///< Data to write - uint8_t wrLen, ///< Number of bytes to write (or in 0x80 for a block write) - void *rdData, ///< Place to store data read - uint8_t rdLen, ///< Number of bytes to read (or in 0x80 for a block read) - uint8_t *bytesReadp ///< Place to store number of bytes read -) -{ - struct i2c_rdwr_ioctl_data rdwr; - struct i2c_msg msg[ 2 ]; - uint8_t wrBuf[ I2C_MAX_DATA_LEN + 3 ]; // +1 for cmd, +1 for len, +1 for CRC - uint8_t rdBuf[ I2C_MAX_DATA_LEN + 2 ]; // +1 for len, +1 for CRC - uint8_t crc = 0; - uint8_t wrBlock = (( wrLen & 0x80 ) != 0 ); - uint8_t rdBlock = (( rdLen & 0x80 ) != 0 ); - int rc = 0; - - LogDebug( "----- I2cTransfer: cmd:0x%02x wrLen:0x%02x rdLen:0x%02x wrBlock:%d rdBlock:%d -----\n", - cmd, wrLen, rdLen, wrBlock, rdBlock ); - if ( wrData != NULL ) - { - LogDebug( "----- wrData:0x%08x *wrData:0x%02x -----\n", wrData, *(const uint8_t *)wrData ); - } - - rdLen &= 0x7f; - wrLen &= 0x7f; - - if ( bytesReadp != NULL ) - { - *bytesReadp = 0; - } - - if ( wrLen > I2C_MAX_DATA_LEN ) - { - LogError( "I2cTransfer: wrLen too big: %d, max is %d\n", - wrLen, I2C_MAX_DATA_LEN ); - errno = ENOBUFS; - return -1; - } - - if ( rdLen > I2C_MAX_DATA_LEN ) - { - LogError( "I2cTransfer: rdLen too big: %d, max is %d\n", - rdLen, I2C_MAX_DATA_LEN ); - errno = ENOBUFS; - return -1; - } - - // Whether we're doing a read or a write, we always send - // the command. - - msg[ 0 ].addr = gI2cAddr; - msg[ 0 ].flags = 0; - msg[ 0 ].len = wrLen + 1 + wrBlock; // +1 for cmd - msg[ 0 ].buf = (char *)&wrBuf[ 0 ]; - - if ( gUseCrc ) - { - crc = Crc8( 0, gI2cAddr << 1 ); - crc = Crc8( crc, cmd ); - } - - wrBuf[ 0 ] = cmd; - - if ( wrLen > 0 ) - { - // We have some data to send down to the device - - if ( wrBlock ) - { - wrBuf[ 1 ] = wrLen; - memcpy( &wrBuf[ 2 ], wrData, wrLen ); - wrLen++; // Add in cmd to the length - } - else - { - memcpy( &wrBuf[ 1 ], wrData, wrLen ); - } - if ( gUseCrc ) - { - crc = Crc8Block( crc, &wrBuf[ 1 ], wrLen ); - - if ( rdLen == 0 ) - { - // This is a write-only, so we need to send the CRC - - wrBuf[ wrLen + 1 ] = crc; - msg[ 0 ].len++; - } - } - } - - if ( gDebug ) - { - Log( "msg[ 0 ].addr = 0x%02x\n", msg[ 0 ].addr ); - Log( "msg[ 0 ].flags = 0x%04x\n", msg[ 0 ].flags ); - Log( "msg[ 0 ].len = %d\n", msg[ 0 ].len ); - DumpMem( "I2cTransfer W", 0, &wrBuf[ 0 ], msg[ 0 ].len ); - } - - rdwr.msgs = msg; - rdwr.nmsgs = 1; - - if ( rdLen > 0 ) - { - // We're expecting some data to come back - - msg[ 1 ].addr = gI2cAddr; - msg[ 1 ].flags = I2C_M_RD; - msg[ 1 ].len = rdLen + rdBlock + gUseCrc; - msg[ 1 ].buf = (char *)&rdBuf[ 0 ]; - - rdwr.nmsgs = 2; - - if ( gUseCrc ) - { - crc = Crc8( crc, ( gI2cAddr << 1 ) | 1 ); - } - - if ( gDebug ) - { - Log( "msg[ 1 ].addr = 0x%02x\n", msg[ 1 ].addr ); - Log( "msg[ 1 ].flags = 0x%04x\n", msg[ 1 ].flags ); - Log( "msg[ 1 ].len = %d\n", msg[ 1 ].len ); - } - } - - if ( ioctl( i2cDev, I2C_RDWR, &rdwr ) < 0 ) - { - LogError( "I2cTransfer: ioctl failed: %s (%d)\n", strerror( errno ), errno ); - return -1; - } - - if ( rdLen > 0 ) - { - if ( rdBlock ) - { - if ( rdBuf[ 0 ] > rdLen ) - { - LogError( "I2cTransfer: length is too big: %d max: %d\n", rdBuf[ 0 ], rdLen ); - - rc = EMSGSIZE; - } - else - { - rdLen = rdBuf[ 0 ]; - } - } - - if ( gUseCrc ) - { - crc = Crc8Block( crc, &rdBuf[ 0 ], rdLen + rdBlock ); - - if ( crc != rdBuf[ rdLen + rdBlock ] ) - { - LogError( "I2cTransfer: CRC failed: Rcvd: 0x%02x, expecting: 0x%02x\n", - rdBuf[ rdLen + rdBlock ], crc ); - rc = EBADMSG; - } - } - - if ( gDebug ) - { - DumpMem( "I2cTransfer R", 0, &rdBuf[ 0 ], msg[ 1 ].len ); - } - memcpy( rdData, &rdBuf[ rdBlock ], rdLen ); - - if ( bytesReadp != NULL ) - { - *bytesReadp = rdLen; - } - } - return rc; - -} // I2cTransfer - -//*************************************************************************** -/** -* Uses the SMBUS Process-Block protocol to read data from a device. -*/ - -int I2cProcessBlock -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrData, ///< Data to write - uint8_t wrLen, ///< Number of bytes to write - void *rdData, ///< Place to store data read - uint8_t rdLen, ///< Number of bytes to read - uint8_t *bytesReadp ///< Place to store number of bytes read -) -{ - LogDebug( "----- I2cProcessBlock cmd: 0x%02x wrLen:0x%02x rdLen:0x%02x -----\n", cmd, wrLen, rdLen ); - - return I2cTransfer( i2cDev, cmd, wrData, 0x80 | wrLen, rdData, 0x80 | rdLen, bytesReadp ); - -} // I2cProcessBlock - -//*************************************************************************** -/** -* Uses the SMBUS Read-Block protocol to read data from a device. -*/ - -int I2cReadBlock -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - void *rdData, ///< Place to store data read - uint8_t rdLen, ///< Number of bytes to read - uint8_t *bytesReadp ///< Place to store number of bytes read -) -{ - LogDebug( "----- I2cReadBlock cmd: 0x%02x rdLen:0x%02x -----\n", cmd, rdLen ); - - return I2cTransfer( i2cDev, cmd, NULL, 0, rdData, 0x80 | rdLen, bytesReadp ); - -} // I2cReadBlock - -//*************************************************************************** -/** -* Uses the SMBUS Read-Byte protocol to read a byte. -*/ - -int I2cReadByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - uint8_t *rdByte ///< Place to store byte read -) -{ - LogDebug( "----- I2cReadByte cmd: 0x%02x -----\n", cmd ); - - return I2cTransfer( i2cDev, cmd, NULL, 0, rdByte, 1, NULL ); - -} // I2cReadByte - -//*************************************************************************** -/** -* Reads an array of bytes usinng i2c (not compatible with SMBUS) -*/ - -int I2cReadBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - void *rdByte, ///< Place to store bytes read - uint8_t rdLen ///< Number of bytes to read -) -{ - LogDebug( "----- I2cReadBytes cmd: 0x%02x rdLen: 0x%02x -----\n", cmd, rdLen ); - - return I2cTransfer( i2cDev, cmd, NULL, 0, rdByte, rdLen, NULL ); - -} // I2cReadBytes - -//*************************************************************************** -/** -* Uses the SMBUS Write-Block protocol to write data from a device. -*/ - -int I2cWriteBlock -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrData, ///< Data to write - uint8_t wrLen ///< Number of bytes to write -) -{ - LogDebug( "----- I2cWriteBlock cmd: 0x%02x wrLen:0x%02x -----\n", cmd, wrLen ); - - return I2cTransfer( i2cDev, cmd, wrData, 0x80 | wrLen, NULL, 0, NULL ); - -} // I2cWriteBlock - -//*************************************************************************** -/** -* Uses the SMBUS Write-Byte protocol to write a byte. -*/ - -int I2cWriteByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - uint8_t wrByte ///< Byte to write -) -{ - LogDebug( "----- I2cWriteByte cmd: 0x%02x wrByte:0x%02x -----\n", cmd, wrByte ); - LogDebug( "----- &wrByte = 0x%08x wrByte = 0x%02x -----\n", &wrByte, *&wrByte ); - - return I2cTransfer( i2cDev, cmd, &wrByte, 1, NULL, 0, NULL ); - -} // I2cWriteByte - -//*************************************************************************** -/** -* Writes an array of bytes using i2c (not compatible with SMBUS) -*/ - -int I2cWriteBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrByte, ///< Bytes to write - uint8_t wrLen ///< Number of bytes to write -) -{ - LogDebug( "----- I2cWriteBytes cmd: 0x%02x wrLen: 0x%02x -----\n", cmd, wrLen ); - - return I2cTransfer( i2cDev, cmd, wrByte, wrLen, NULL, 0, NULL ); - -} // I2cWriteBytes - -//*************************************************************************** -/** -* Uses the SMBUS Receive-Byte protocol to read a byte. -*/ - -int I2cReceiveByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t *rdByte ///< Place to store byte read -) -{ - return I2cReceiveBytes( i2cDev, rdByte, 1 ); - -} // I2cReceiveByte - -//*************************************************************************** -/** -* Uses the SMBUS Receive-Byte protocol to read multiple (or one or zero) bytes. -*/ - -int I2cReceiveBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t *rdData, ///< Place to store data read - uint8_t rdLen ///< Number of bytes to read -) -{ - struct i2c_rdwr_ioctl_data rdwr; - struct i2c_msg msg; - - LogDebug( "----- I2cReceiveBytes -----\n" ); - - msg.addr = gI2cAddr; - msg.flags = I2C_M_RD; - msg.len = rdLen; - msg.buf = (char *)rdData; - - rdwr.msgs = &msg; - rdwr.nmsgs = 1; - - if ( ioctl( i2cDev, I2C_RDWR, &rdwr ) < 0 ) - { - LogError( "I2cReceiveBytes: ioctl failed: %s (%d)\n", strerror( errno ), errno ); - return -1; - } - - return 0; - -} // I2cReceiveBytes - -//*************************************************************************** -/** -* Uses the SMBUS Send-Byte protocol to write a byte. -*/ - -int I2cSendByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t wrByte ///< Byte to write -) -{ - return I2cSendBytes( i2cDev, &wrByte, 1 ); - -} // I2cSendByte - -//*************************************************************************** -/** -* Uses the SMBUS Send-Byte protocol to write multiple (or zero or one) bytes. -*/ - -int I2cSendBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t *wrData, ///< Pointer to data to write - uint8_t wrLen ///< NUmber of bytes to write -) -{ - struct i2c_rdwr_ioctl_data rdwr; - struct i2c_msg msg; - - LogDebug( "----- I2cSendBytes wrLen = 0x%02x -----\n", wrLen ); - - msg.addr = gI2cAddr; - msg.flags = 0; - msg.len = wrLen; - msg.buf = (char *)wrData; - - rdwr.msgs = &msg; - rdwr.nmsgs = 1; - - if ( ioctl( i2cDev, I2C_RDWR, &rdwr ) < 0 ) - { - LogError( "I2cSendBytes: ioctl failed: %s (%d)\n", strerror( errno ), errno ); - return -1; - } - - return 0; - -} // I2cSendBytes - diff --git a/packages/i2c/files/i2c-api.h b/packages/i2c/files/i2c-api.h deleted file mode 100644 index 73f9f20990..0000000000 --- a/packages/i2c/files/i2c-api.h +++ /dev/null @@ -1,143 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file i2c-api.h -* -* @brief This file contains definitions for performing i2c operations -* on the gumstix. -* -****************************************************************************/ - -#if !defined( I2C_API_H ) -#define I2C_API_H - -// ---- Include Files ------------------------------------------------------- - -#include -#include "i2c.h" - -// ---- Constants and Types ------------------------------------------------- - -#define I2C_USE_CRC 1 -#define I2C_NO_CRC 0 - -// ---- Variable Externs ---------------------------------------------------- - -// ---- Function Prototypes ------------------------------------------------- - -void I2cSetSlaveAddress -( - int i2cDev, ///< Handle to i2c-dev file - I2C_Addr_t i2cAddr, ///< 7 bit i2c address to use - int useCrc ); ///< Should CRC's be used? - -int I2cTransfer -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrData, ///< Data to write - uint8_t wrLen, ///< Number of bytes to write (or in 0x80 for a block write) - void *rdData, ///< Place to store data read - uint8_t rdLen, ///< Number of bytes to read (or in 0x80 for a block read) - uint8_t *bytesReadp ///< Place to store number of bytes read -); - -int I2cProcessBlock -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrData, ///< Data to write - uint8_t wrLen, ///< Number of bytes to write - void *rdData, ///< Place to store data read - uint8_t rdLen, ///< Number of bytes to read - uint8_t *bytesReadp ///< Place to store number of bytes read -); - -int I2cReadBlock -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - void *rdData, ///< Place to store data read - uint8_t rdLen, ///< Number of bytes to read - uint8_t *bytesReadp ///< Place to store number of bytes read -); - -int I2cReadByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - uint8_t *rdByte ///< Place to store byte to read -); - -int I2cReadBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - void *rdByte, ///< Place to store bytes read - uint8_t rdLen ///< Number of bytes to read -); - -int I2cWriteBlock -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrData, ///< Data to write - uint8_t wrLen ///< Number of bytes to write -); - -int I2cWriteByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - uint8_t wrByte ///< Byte to write -); - -int I2cWriteBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t cmd, ///< Command to send - const void *wrByte, ///< Bytes to write - uint8_t wrLen ///< Number of bytes to write -); - -int I2cReceiveByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t *rdByte ///< Place to store byte read -); - -int I2cReceiveBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t *rdData, ///< Place to store byte read - uint8_t rdLen ///< Number of bytes to read -); - -int I2cSendByte -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t wrByte ///< Byte to write -); - -int I2cSendBytes -( - int i2cDev, ///< Handle to i2c-dev file - uint8_t *wrData, ///< Pointer to data to write. - uint8_t wrLen ///< Number of bytes to write. -); - -#endif // I2C_API_H - diff --git a/packages/i2c/files/i2c-dev.h b/packages/i2c/files/i2c-dev.h deleted file mode 100644 index cd20965ede..0000000000 --- a/packages/i2c/files/i2c-dev.h +++ /dev/null @@ -1,365 +0,0 @@ -/* - i2c-dev.h - i2c-bus driver, char device interface - - Copyright (C) 1995-97 Simon G. Vogl - Copyright (C) 1998-99 Frodo Looijaard - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* $Id: i2c-dev.h,v 1.4 2003/11/27 23:08:06 tat Exp $ */ - -#ifndef LIB_I2CDEV_H -#define LIB_I2CDEV_H - -#include -#include - - -/* -- i2c.h -- */ - - -/* - * I2C Message - used for pure i2c transaction, also from /dev interface - */ -struct i2c_msg { - __u16 addr; /* slave address */ - unsigned short flags; -#define I2C_M_TEN 0x10 /* we have a ten bit chip address */ -#define I2C_M_RD 0x01 -#define I2C_M_NOSTART 0x4000 -#define I2C_M_REV_DIR_ADDR 0x2000 -#define I2C_M_IGNORE_NAK 0x1000 -#define I2C_M_NO_RD_ACK 0x0800 - short len; /* msg length */ - char *buf; /* pointer to msg data */ -}; - -/* To determine what functionality is present */ - -#define I2C_FUNC_I2C 0x00000001 -#define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ -#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC 0x00000800 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_PROC_CALL_PEC 0x00002000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */ -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC 0x40000000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */ - -#define I2C_FUNC_SMBUS_BYTE I2C_FUNC_SMBUS_READ_BYTE | \ - I2C_FUNC_SMBUS_WRITE_BYTE -#define I2C_FUNC_SMBUS_BYTE_DATA I2C_FUNC_SMBUS_READ_BYTE_DATA | \ - I2C_FUNC_SMBUS_WRITE_BYTE_DATA -#define I2C_FUNC_SMBUS_WORD_DATA I2C_FUNC_SMBUS_READ_WORD_DATA | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA -#define I2C_FUNC_SMBUS_BLOCK_DATA I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA -#define I2C_FUNC_SMBUS_I2C_BLOCK I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK -#define I2C_FUNC_SMBUS_I2C_BLOCK_2 I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 -#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC -#define I2C_FUNC_SMBUS_WORD_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC - -#define I2C_FUNC_SMBUS_READ_BYTE_PEC I2C_FUNC_SMBUS_READ_BYTE_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC I2C_FUNC_SMBUS_WRITE_BYTE_DATA -#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC I2C_FUNC_SMBUS_WRITE_WORD_DATA -#define I2C_FUNC_SMBUS_BYTE_PEC I2C_FUNC_SMBUS_BYTE_DATA -#define I2C_FUNC_SMBUS_BYTE_DATA_PEC I2C_FUNC_SMBUS_WORD_DATA - -#define I2C_FUNC_SMBUS_EMUL I2C_FUNC_SMBUS_QUICK | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_PROC_CALL | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \ - I2C_FUNC_SMBUS_I2C_BLOCK - -/* - * Data for SMBus Messages - */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */ -union i2c_smbus_data { - __u8 byte; - __u16 word; - __u8 block[I2C_SMBUS_BLOCK_MAX + 3]; /* block[0] is used for length */ - /* one more for read length in block process call */ - /* and one more for PEC */ -}; - -/* smbus_access read or write markers */ -#define I2C_SMBUS_READ 1 -#define I2C_SMBUS_WRITE 0 - -/* SMBus transaction types (size parameter in the above functions) - Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ -#define I2C_SMBUS_QUICK 0 -#define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 -#define I2C_SMBUS_WORD_DATA 3 -#define I2C_SMBUS_PROC_CALL 4 -#define I2C_SMBUS_BLOCK_DATA 5 -#define I2C_SMBUS_I2C_BLOCK_DATA 6 -#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_DATA_PEC 8 /* SMBus 2.0 */ -#define I2C_SMBUS_PROC_CALL_PEC 9 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_PROC_CALL_PEC 10 /* SMBus 2.0 */ -#define I2C_SMBUS_WORD_DATA_PEC 11 /* SMBus 2.0 */ - - -/* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the - * corresponding header files. - */ - /* -> bit-adapter specific ioctls */ -#define I2C_RETRIES 0x0701 /* number of times a device address */ - /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ - - -/* this is for i2c-dev.c */ -#define I2C_SLAVE 0x0703 /* Change slave address */ - /* Attn.: Slave address is 7 or 10 bits */ -#define I2C_SLAVE_FORCE 0x0706 /* Change slave address */ - /* Attn.: Slave address is 7 or 10 bits */ - /* This changes the address, even if it */ - /* is already taken! */ -#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ - -#define I2C_FUNCS 0x0705 /* Get the adapter functionality */ -#define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/ -#define I2C_PEC 0x0708 /* != 0 for SMBus PEC */ -#if 0 -#define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific address */ -#endif - -#define I2C_SMBUS 0x0720 /* SMBus-level access */ - -/* -- i2c.h -- */ - - -/* Note: 10-bit addresses are NOT supported! */ - -/* This is the structure as used in the I2C_SMBUS ioctl call */ -struct i2c_smbus_ioctl_data { - char read_write; - __u8 command; - int size; - union i2c_smbus_data *data; -}; - -/* This is the structure as used in the I2C_RDWR ioctl call */ -struct i2c_rdwr_ioctl_data { - struct i2c_msg *msgs; /* pointers to i2c_msgs */ - int nmsgs; /* number of i2c_msgs */ -}; - - -static inline __s32 i2c_smbus_access(int file, char read_write, __u8 command, - int size, union i2c_smbus_data *data) -{ - struct i2c_smbus_ioctl_data args; - int rc; - - args.read_write = read_write; - args.command = command; - args.size = size; - args.data = data; - - rc = ioctl(file,I2C_SMBUS,&args); - - return rc; -} - - -static inline __s32 i2c_smbus_write_quick(int file, __u8 value) -{ - return i2c_smbus_access(file,value,0,I2C_SMBUS_QUICK,NULL); -} - -static inline __s32 i2c_smbus_read_byte(int file) -{ - union i2c_smbus_data data; - if (i2c_smbus_access(file,I2C_SMBUS_READ,0,I2C_SMBUS_BYTE,&data)) - return -1; - else - return 0x0FF & data.byte; -} - -static inline __s32 i2c_smbus_write_byte(int file, __u8 value) -{ - return i2c_smbus_access(file,I2C_SMBUS_WRITE,value, - I2C_SMBUS_BYTE,NULL); -} - -static inline __s32 i2c_smbus_read_byte_data(int file, __u8 command) -{ - union i2c_smbus_data data; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_BYTE_DATA,&data)) - return -1; - else - return 0x0FF & data.byte; -} - -static inline __s32 i2c_smbus_write_byte_data(int file, __u8 command, - __u8 value) -{ - union i2c_smbus_data data; - data.byte = value; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_BYTE_DATA, &data); -} - -static inline __s32 i2c_smbus_read_word_data(int file, __u8 command) -{ - union i2c_smbus_data data; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_WORD_DATA,&data)) - return -1; - else - return 0x0FFFF & data.word; -} - -static inline __s32 i2c_smbus_write_word_data(int file, __u8 command, - __u16 value) -{ - union i2c_smbus_data data; - data.word = value; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_WORD_DATA, &data); -} - -static inline __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value) -{ - union i2c_smbus_data data; - data.word = value; - if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_PROC_CALL,&data)) - return -1; - else - return 0x0FFFF & data.word; -} - - -/* Returns the number of read bytes */ -static inline __s32 i2c_smbus_read_block_data(int file, __u8 command, - __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_BLOCK_DATA,&data)) - return -1; - else { - for (i = 1; i <= data.block[0]; i++) - values[i-1] = data.block[i]; - return data.block[0]; - } -} - -static inline __s32 i2c_smbus_write_block_data(int file, __u8 command, - __u8 length, __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (length > 32) - length = 32; - for (i = 1; i <= length; i++) - data.block[i] = values[i-1]; - data.block[0] = length; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_BLOCK_DATA, &data); -} - -/* Returns the number of read bytes */ -static inline __s32 i2c_smbus_read_i2c_block_data(int file, __u8 command, - __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_I2C_BLOCK_DATA,&data)) - return -1; - else { - for (i = 1; i <= data.block[0]; i++) - values[i-1] = data.block[i]; - return data.block[0]; - } -} - -static inline __s32 i2c_smbus_write_i2c_block_data(int file, __u8 command, - __u8 length, __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (length > 32) - length = 32; - for (i = 1; i <= length; i++) - data.block[i] = values[i-1]; - data.block[0] = length; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_I2C_BLOCK_DATA, &data); -} - -/* Returns the number of read bytes */ -static inline __s32 i2c_smbus_block_process_call(int file, __u8 command, - __u8 length, __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (length > 32) - length = 32; - for (i = 1; i <= length; i++) - data.block[i] = values[i-1]; - data.block[0] = length; - i = i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_BLOCK_PROC_CALL,&data); - if ( i ) - return -1; - else { - for (i = 1; i <= data.block[0]; i++) - values[i-1] = data.block[i]; - return data.block[0]; - } -} - - -#endif /* LIB_I2CDEV_H */ - diff --git a/packages/i2c/files/i2c-io-api.h b/packages/i2c/files/i2c-io-api.h deleted file mode 100644 index 35ab45865c..0000000000 --- a/packages/i2c/files/i2c-io-api.h +++ /dev/null @@ -1,52 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file i2c-io-api.h -* -* @brief This file contains definitions for performing i2c-io operations -* on the gumstix. -* -****************************************************************************/ - -#if !defined( I2C_IO_API_H ) -#define I2C_IO_API_H - -// ---- Include Files ------------------------------------------------------- - -#include -#include "i2c-io.h" - -// ---- Constants and Types ------------------------------------------------- - -// ---- Variable Externs ---------------------------------------------------- - -// ---- Function Prototypes ------------------------------------------------- - -int I2C_IO_CheckVersion( const I2C_IO_Info_t *info ); - -int I2C_IO_GetInfo( int i2cDev, I2C_IO_Info_t *info ); -int I2C_IO_GetGPIO( int i2cDev, uint8_t portNum, uint8_t *pinVal ); -int I2C_IO_SetGPIO( int i2cDev, uint8_t portNum, uint8_t pinMask, uint8_t pinVal ); -int I2C_IO_GetGPIODir( int i2cDev, uint8_t portNum, uint8_t *pinVal ); -int I2C_IO_SetGPIODir( int i2cDev, uint8_t portNum, uint8_t pinMask, uint8_t pinVal ); -int I2C_IO_GetADC( int i2cDev, uint8_t mux, uint16_t *adcVal ); -int I2C_IO_ReadReg8( int i2cDev, uint8_t reg, uint8_t *regVal ); -int I2C_IO_ReadReg16( int i2cDev, uint8_t reg, uint16_t *regVal ); -int I2C_IO_WriteReg8( int i2cDev, uint8_t reg, uint8_t regVal ); -int I2C_IO_WriteReg16( int i2cDev, uint8_t reg, uint16_t regVal ); - -#endif // I2C_IO_API_H - diff --git a/packages/i2c/files/i2c-io.h b/packages/i2c/files/i2c-io.h deleted file mode 100644 index 3ffb5e9c0e..0000000000 --- a/packages/i2c/files/i2c-io.h +++ /dev/null @@ -1,220 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file i2c-io.h -* -* @brief This file defines the interface to the i2c-io program which -* runs on the robostix. -* -*****************************************************************************/ - -#if !defined( I2C_IO_H ) -#define I2C_IO_H /**< Include Guard */ - -/* ---- Include Files ---------------------------------------------------- */ - -/* ---- Constants and Types ---------------------------------------------- */ - -//--------------------------------------------------------------------------- -/** - * Defines the version of this API. This includes the layout of the - * various structures, along with the semantics associated with the - * protocol. Any changes require the version number to be incremented. - * - * Version 2 - Introduced READ/WRITE_REG_8/16 - */ - -#define I2C_IO_API_VERSION 2 - -//--------------------------------------------------------------------------- -/** - * The min version, determines the minimum version that this API is - * compatable with. This allows old host side programs to determine - * that they're not compatible. - */ - -#define I2C_IO_API_MIN_VERSION 1 - - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_GET_INFO command retrieves information about the i2c-io -* program running on the robostix. -*/ - -#define I2C_IO_GET_INFO 0x01 - -typedef struct -{ - uint8_t version; - uint8_t minVersion; - uint16_t svnRevision; - -} I2C_IO_Info_t; - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_GET_GPIO command retrieves the values of the pins indicated -* by portNum. -* -* The portNum is set such that 0 = A, 1 = B, etc. -* -* A block-reply with a single 8 bit value is returned. -*/ - -typedef struct -{ - uint8_t portNum; - -} I2C_IO_Get_GPIO_t; - -#define I2C_IO_GET_GPIO 0x02 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_SET_GPIO command sets the values of the pins specified -* by pinMask to the correponding bits in ponVal. -* -* Note: Setting a pin that's configured for input will enable a pullup -* resistor. -* -* The portNum is set such that 0 = A, 1 = B, etc. -*/ - -typedef struct -{ - uint8_t portNum; - uint8_t pinMask; - uint8_t pinVal; - -} I2C_IO_Set_GPIO_t; - -#define I2C_IO_SET_GPIO 0x03 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_GET_GPIO_DIR command retrieves the data direction -* register (DDR) for the indicated portNum. -* -* The I2C_IO_Get_GPIO_t structure is used for this command. -* -* Note: It's ok to read the values of pins which are set for output. -* -* The portNum is set such that 0 = A, 1 = B, etc. -* -* A block-reply with a single 8 bit value is returned. -* A 1 bit means that the pin is set for output and a 0 bit means that -* the pin is set for input. -*/ - -#define I2C_IO_GET_GPIO_DIR 0x04 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_SET_GPIO_DIR command sets the data direction -* register (DDR) for the indicated portNum. -* -* The I2C_IO_Set_GPIO_t structure is used for this command. -* -* The portNum is set such that 0 = A, 1 = B, etc. -*/ - -#define I2C_IO_SET_GPIO_DIR 0x05 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_GET_ADC command performs an ADC sample and returns the result. -* -* mux values 0 thru 7 read singled ended ADC values. Values 8 thru 31 -* return a variety of values. See the data sheet for specifics. -* -* A block-reply with a 16 bit value is returned, although only the -* lower 10 bits are significant. -*/ - -typedef struct -{ - uint8_t mux; - -} I2C_IO_Get_ADC_t; - -#define I2C_IO_GET_ADC 0x06 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_READ_REG_8 command reads a 8-bit register. -* -* A block reply with an 8 bit value is returned. -*/ - -typedef struct -{ - uint8_t reg; ///< Index of the register to be read. - -} I2C_IO_ReadReg8_t; - -#define I2C_IO_READ_REG_8 0x07 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_READ_REG_16 command reads a 16-bit register. -* -* A block reply with a 16 bit value is returned. -*/ - -typedef struct -{ - uint8_t reg; ///< Index of the register to be read. - -} I2C_IO_ReadReg16_t; - -#define I2C_IO_READ_REG_16 0x08 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_WRITE_REG_8 command writes an 8-bit register. -*/ - -typedef struct -{ - uint8_t reg; ///< Index of the register to be read. - uint8_t val; ///< Value to write into the register - -} I2C_IO_WriteReg8_t; - -#define I2C_IO_WRITE_REG_8 0x09 - -//--------------------------------------------------------------------------- -/** -* The I2C_IO_WRITE_REG_16 command writes a 16-bit register. -*/ - -typedef struct -{ - uint8_t reg; ///< Index of the register to be read. - uint8_t pad; ///< Pad for alignment on the host. - uint16_t val; ///< Value to write - -} I2C_IO_WriteReg16_t; - -#define I2C_IO_WRITE_REG_16 0x0A - -/* ---- Variable Externs ------------------------------------------------- */ - -/* ---- Function Prototypes ---------------------------------------------- */ - -#endif /* I2C_IO_H */ - diff --git a/packages/i2c/files/i2c.c b/packages/i2c/files/i2c.c deleted file mode 100644 index 9f0bafdba1..0000000000 --- a/packages/i2c/files/i2c.c +++ /dev/null @@ -1,710 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file i2c.c -* -* @brief This program allows basic i2c commands to be sent out the i2c -* bus, -* -****************************************************************************/ - -// ---- Include Files ------------------------------------------------------- - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "i2c-dev.h" -#include "i2c-api.h" -#include "i2c-io-api.h" -#include "Log.h" - -// #include "svn-version.h" - -// ---- Public Variables ---------------------------------------------------- -// ---- Private Constants and Types ----------------------------------------- - -// ---- Private Variables --------------------------------------------------- - -enum -{ - OPT_MEM_DEFAULT = 0, - - // Options assigned a single character code can use that charater code - // as a short option. - - OPT_COUNT = 'c', - - // Options from this point onwards don't have any short option equivalents - - OPT_FIRST_LONG_OPT = 0x80, - - OPT_HELP, - OPT_VERSION, -}; - -enum -{ - CMD_DEFAULT, - - CMD_READ_BYTE, - CMD_READ_BYTE_2, - CMD_READ_BYTE_4, - - CMD_WRITE_BYTE, - CMD_WRITE_BYTE_2, - CMD_WRITE_BYTE_4, - - CMD_RECV_BYTE, - CMD_RECV_BYTE_2, - CMD_RECV_BYTE_4, - - CMD_SEND_BYTE, - CMD_SEND_BYTE_2, - CMD_SEND_BYTE_4, -}; - -struct -{ - int cmd; - const char *cmdStr; - -} gCmdMap[] = -{ - { CMD_READ_BYTE, "ReadByte" }, - { CMD_READ_BYTE, "rb" }, - { CMD_READ_BYTE_2, "ReadByte2" }, - { CMD_READ_BYTE_2, "rb2" }, - { CMD_READ_BYTE_4, "ReadByte4" }, - { CMD_READ_BYTE_4, "rb4" }, - - { CMD_WRITE_BYTE, "WriteByte" }, - { CMD_WRITE_BYTE, "wb" }, - { CMD_WRITE_BYTE_2, "WriteByte2" }, - { CMD_WRITE_BYTE_2, "wb2" }, - { CMD_WRITE_BYTE_4, "WriteByte4" }, - { CMD_WRITE_BYTE_4, "wb4" }, - - { CMD_RECV_BYTE, "RecvByte" }, - { CMD_RECV_BYTE, "vb" }, - { CMD_RECV_BYTE_2, "RecvByte2" }, - { CMD_RECV_BYTE_2, "vb2" }, - { CMD_RECV_BYTE_4, "RecvByte4" }, - { CMD_RECV_BYTE_4, "vb4" }, - - { CMD_SEND_BYTE, "SendByte" }, - { CMD_SEND_BYTE, "sb" }, - { CMD_SEND_BYTE_2, "SendByte2" }, - { CMD_SEND_BYTE_2, "sb2" }, - { CMD_SEND_BYTE_4, "SendByte4" }, - { CMD_SEND_BYTE_4, "sb4" }, -}; - -int gNumCmds = sizeof( gCmdMap ) / sizeof( gCmdMap[ 0 ]); - -int gI2cAddr = -1; -int gByteCount = 1; - -const char *gCmdStr; -int gCmd = CMD_DEFAULT; -const char *gAddrStr = NULL; -const char *gDataStr = NULL; - -struct option gOption[] = -{ - { "count", required_argument, NULL, OPT_COUNT }, - { "version", no_argument, NULL, OPT_VERSION }, - { "verbose", no_argument, &gVerbose, 1 }, - { "debug", no_argument, &gDebug, 1 }, - { "help", no_argument, NULL, OPT_HELP }, - { NULL } -}; - -#define TRUE 1 -#define FALSE 0 - -typedef enum -{ - NoADC, - AllowADC, - -} AllowADC_t; - -#define ADC_PORT 8 - -// ---- Private Function Prototypes ----------------------------------------- - -static int ParseByte( const char *byteStr, uint8_t *byte ); -static int ParseBytes( const char *byteStr, uint8_t *byte, uint8_t maxBytes, uint8_t *bytesParsed ); - -static void ProcessReadByteCommand( int i2cDev, const char *addrStr ); -static void ProcessWriteByteCommand( int i2cDev, const char *addrStr, const char *dataStr ); -static void ProcessRecvByteCommand( int i2cDev ); -static void ProcessSendByteCommand( int i2cDev, const char *dataStr ); -static void Usage( void ); - -// ---- Functions ----------------------------------------------------------- - -//*************************************************************************** -/** -* Main entry point -*/ - -int main( int argc, char **argv ) -{ - char shortOptsStr[ sizeof( gOption ) / sizeof( gOption[ 0 ] ) + 1 ]; - char *shortOpts = shortOptsStr; - struct option *scanOpt; - int opt; - const char *i2cDevName = "/dev/i2c-0"; - int i2cDev; - int cmdIdx; - - LogInit( stdout ); - - // Figure out the short options from our options structure - - for ( scanOpt = gOption; scanOpt->name != NULL; scanOpt++ ) - { - if (( scanOpt->flag == NULL ) && ( scanOpt->val < OPT_FIRST_LONG_OPT )) - { - *shortOpts++ = (char)scanOpt->val; - - if ( scanOpt->has_arg != no_argument ) - { - *shortOpts++ = ':'; - } - } - } - *shortOpts++ = '\0'; - - // Parse the command line options - - while (( opt = getopt_long( argc, argv, shortOptsStr, gOption, NULL )) != -1 ) - { - switch ( opt ) - { - case 0: - { - // getopt_long returns 0 for entries where flag is non-NULL - - break; - } - - case OPT_COUNT: - { - gByteCount = (int)strtol( optarg, NULL, 0 ); - if ( gByteCount <= 0 ) - { - LogError( "Expecting byte count >= 0, found: '%s'\n", optarg ); - Usage(); - exit( 1 ); - } - if ( gByteCount > I2C_MAX_DATA_LEN ) - { - LogError( "Max byte count supported: %d, found %d\n", I2C_MAX_DATA_LEN, gByteCount ); - Usage(); - exit( 1 ); - } - break; - } - -// case OPT_VERSION: -// { -// Log( "i2c SVN Revision: %d\n", SVN_REVISION ); -// exit( 0 ); -// break; -// } - - case '?': - case OPT_HELP: - default: - { - LogError( "opt:%d\n", opt ); - Usage(); - exit( 1 ); - } - } - } - argc -= optind; - argv += optind; - - // Verify that an i2c-address was specified - - if ( argc < 1 ) - { - LogError( "Must specify an i2c address\n\n" ); - Usage(); - exit( 1 ); - } - gI2cAddr = strtol( argv[ 0 ], NULL, 0 ); - if (( gI2cAddr <= 0 ) || ( gI2cAddr > 127 )) - { - LogError( "Expecting i2c address in the range of 1-127, Found: %d\n", gI2cAddr ); - Usage(); - exit( 1 ); - } - - // Verify that a command has been specified - - if ( argc < 2 ) - { - LogError( "Must specify a command\n" ); - Usage(); - exit( 1 ); - } - gCmdStr = argv[ 1 ]; - for ( cmdIdx = 0; cmdIdx < gNumCmds; cmdIdx++ ) - { - if ( strcasecmp( gCmdStr, gCmdMap[ cmdIdx ].cmdStr ) == 0 ) - { - gCmd = gCmdMap[ cmdIdx ].cmd; - break; - } - } - if ( gCmd == CMD_DEFAULT ) - { - LogError( "Unrecognized command '%s'\n", gCmdStr ); - exit( 1 ); - } - - // Process command specific arguments - - if (( gCmd == CMD_READ_BYTE_2 ) - || ( gCmd == CMD_WRITE_BYTE_2 ) - || ( gCmd == CMD_RECV_BYTE_2 ) - || ( gCmd == CMD_SEND_BYTE_2 )) - { - gByteCount = 2; - } - else - if (( gCmd == CMD_READ_BYTE_4 ) - || ( gCmd == CMD_WRITE_BYTE_4 ) - || ( gCmd == CMD_RECV_BYTE_4 ) - || ( gCmd == CMD_SEND_BYTE_4 )) - { - gByteCount = 4; - } - - if (( gCmd == CMD_READ_BYTE ) - || ( gCmd == CMD_READ_BYTE_2 ) - || ( gCmd == CMD_READ_BYTE_4 )) - { - if ( argc < 3 ) - { - LogError( "Expecting address\n" ); - Usage(); - exit( 1 ); - } - if ( argc > 3 ) - { - LogError( "Unexpected extra parameters\n" ); - Usage(); - exit( 1 ); - } - - gAddrStr = argv[ 2 ]; - } - else - if (( gCmd == CMD_WRITE_BYTE ) - || ( gCmd == CMD_WRITE_BYTE_2 ) - || ( gCmd == CMD_WRITE_BYTE_4 )) - { - if ( argc < 4 ) - { - LogError( "Expecting address and data\n" ); - Usage(); - exit( 1 ); - } - if ( argc > 4 ) - { - LogError( "Unexpected extra parameters\n" ); - Usage(); - exit( 1 ); - } - - gAddrStr = argv[ 2 ]; - gDataStr = argv[ 3 ]; - } - else - if (( gCmd == CMD_RECV_BYTE ) - || ( gCmd == CMD_RECV_BYTE_2 ) - || ( gCmd == CMD_RECV_BYTE_4 )) - { - if ( argc > 2 ) - { - LogError( "Unexpected extra parameters\n" ); - Usage(); - exit( 1 ); - } - } - else - if (( gCmd == CMD_SEND_BYTE ) - || ( gCmd == CMD_SEND_BYTE_2 ) - || ( gCmd == CMD_SEND_BYTE_4 )) - { - if ( argc < 3 ) - { - LogError( "Expecting data\n" ); - Usage(); - exit( 1 ); - } - if ( argc > 3 ) - { - LogError( "Unexpected extra parameters\n" ); - Usage(); - exit( 1 ); - } - gDataStr = argv[ 2 ]; - } - - if ( gDebug ) - { - Log( "i2cAddr:0x%02x Cmd: %s (%d)", gI2cAddr, gCmdStr, gCmd ); - if ( gAddrStr != NULL ) - { - Log( " Addr: %s", gAddrStr ); - } - if ( gDataStr != NULL ) - { - Log( " Data: %s", gDataStr ); - } - Log( "\n" ); - } - - // Try to open the i2c device - - if (( i2cDev = open( i2cDevName, O_RDWR )) < 0 ) - { - LogError( "Error opening '%s': %s\n", i2cDevName, strerror( errno )); - exit( 1 ); - } - - // Indicate which slave we wish to speak to - - I2cSetSlaveAddress( i2cDev, gI2cAddr, I2C_NO_CRC ); - - switch ( gCmd ) - { - case CMD_READ_BYTE: - case CMD_READ_BYTE_2: - case CMD_READ_BYTE_4: - { - ProcessReadByteCommand( i2cDev, gAddrStr ); - break; - } - - case CMD_WRITE_BYTE: - case CMD_WRITE_BYTE_2: - case CMD_WRITE_BYTE_4: - { - ProcessWriteByteCommand( i2cDev, gAddrStr, gDataStr ); - break; - } - - case CMD_RECV_BYTE: - case CMD_RECV_BYTE_2: - case CMD_RECV_BYTE_4: - { - ProcessRecvByteCommand( i2cDev ); - break; - } - - case CMD_SEND_BYTE: - case CMD_SEND_BYTE_2: - case CMD_SEND_BYTE_4: - { - ProcessSendByteCommand( i2cDev, gDataStr ); - break; - } - } - - close( i2cDev ); - - return 0; - -} // main - -//*************************************************************************** -/** -* Parse a string looking for a single byte. -*/ - -int ParseByte( const char *byteStr, uint8_t *byte ) -{ - char *endPtr; - - *byte = (uint8_t)strtol( byteStr, &endPtr, 0 ); - - if ( *endPtr != '\0' ) - { - LogError( "Expecting numeric value, found '%s'\n", byteStr ); - return FALSE; - } - - return TRUE; - -} // ParseByte - -//*************************************************************************** -/** -* Parse a string looking for an array of bytes. -*/ - -int ParseBytes( const char *byteStr, uint8_t *byte, uint8_t maxBytes, uint8_t *bytesParsed ) -{ - char *endPtr; - - if (( byteStr[ 0 ] == '0' ) && ( byteStr[ 1 ] == 'x' )) - { - const char *s = &byteStr[ 2 ]; - *bytesParsed = 0; - - // Could be a multi-byte hex string - - while ( *s != '\0' ) - { - if ( *bytesParsed >= maxBytes ) - { - LogError( "Too many bytes, max: %d\n", maxBytes ); - return FALSE; - } - - (*bytesParsed)++; - *byte = 0; - - if (( *s >= 'A' ) && ( *s <= 'F' )) - { - *byte = *s - 'A' + 10; - } - else - if (( *s >= 'a' ) && ( *s <= 'f' )) - { - *byte = *s - 'a' + 10; - } - else - if (( *s >= '0' ) && ( *s <= '9' )) - { - *byte = *s - '0'; - } - else - { - LogError( "Expecting hex digit, found '%c'\n", *s ); - return FALSE; - } - s++; - - if ( *s == '\0' ) - { - break; - } - - *byte <<= 4; - if (( *s >= 'A' ) && ( *s <= 'F' )) - { - *byte |= *s - 'A' + 10; - } - else - if (( *s >= 'a' ) && ( *s <= 'f' )) - { - *byte |= *s - 'a' + 10; - } - else - if (( *s >= '0' ) && ( *s <= '9' )) - { - *byte |= *s - '0'; - } - else - { - LogError( "Expecting hex digit, found '%c'\n", *s ); - return FALSE; - } - s++; - byte++; - } - } - else - { - // It's decimal or octal - only a single byte - - *byte = (uint8_t)strtol( byteStr, &endPtr, 0 ); - - if ( *endPtr != '\0' ) - { - LogError( "Expecting numeric value, found '%s'\n", byteStr ); - return FALSE; - } - *bytesParsed = 1; - } - - return TRUE; - -} // ParseBytes - -//*************************************************************************** -/** -* Issues a read byte command to read a byte from a particular address. -*/ - -void ProcessReadByteCommand( int i2cDev, const char *addrStr ) -{ - uint8_t addr; - uint8_t dataByte[ I2C_MAX_DATA_LEN ]; - int rc; - int i; - - if ( !ParseByte( addrStr, &addr )) - { - return; - } - - if (( rc = I2cReadBytes( i2cDev, addr, dataByte, gByteCount )) != 0 ) - { - LogError( "I2cReadByte failed: %d\n", rc ); - return; - } - - Log( "0x", dataByte[0] ); - - for ( i = 0; i < gByteCount; i++ ) - { - Log( "%02x", dataByte[i] ); - } - Log( "\n" ); - -} // ProcessReadByteCommand - -//*************************************************************************** -/** -* Issues a recv byte command to read bytes with no address. -*/ - -void ProcessRecvByteCommand( int i2cDev ) -{ - uint8_t dataByte[ I2C_MAX_DATA_LEN ]; - int rc; - int i; - - if (( rc = I2cReceiveBytes( i2cDev, dataByte, gByteCount )) != 0 ) - { - LogError( "I2cRecvBytes failed: %d\n", rc ); - return; - } - - Log( "0x", dataByte[0] ); - - for ( i = 0; i < gByteCount; i++ ) - { - Log( "%02x", dataByte[i] ); - } - Log( "\n" ); - -} // ProcessRecvByteCommand - -//*************************************************************************** -/** -* Issues a write byte command to write a byte to a particular address. -*/ - -void ProcessWriteByteCommand( int i2cDev, const char *addrStr, const char *dataStr ) -{ - uint8_t addr; - uint8_t dataByte[ I2C_MAX_DATA_LEN ]; - uint8_t bytesParsed; - int rc; - - if ( !ParseByte( addrStr, &addr )) - { - return; - } - - if ( !ParseBytes( dataStr, dataByte, sizeof( dataByte ), &bytesParsed )) - { - return; - } - - if (( rc = I2cWriteBytes( i2cDev, addr, dataByte, bytesParsed )) != 0 ) - { - LogError( "I2cWriteBytes failed: %d\n", rc ); - return; - } - -} // ProcessWriteByteCommand - -//*************************************************************************** -/** -* Issues a send byte command to write bytes with no address specified. -*/ - -void ProcessSendByteCommand( int i2cDev, const char *dataStr ) -{ - uint8_t dataByte[ I2C_MAX_DATA_LEN ]; - uint8_t bytesParsed; - int rc; - - if ( !ParseBytes( dataStr, dataByte, sizeof( dataByte ), &bytesParsed )) - { - return; - } - - if (( rc = I2cSendBytes( i2cDev, dataByte, bytesParsed )) != 0 ) - { - LogError( "I2cSendBytes failed: %d\n", rc ); - return; - } - -} // ProcessSendByteCommand - -//*************************************************************************** -/** -* Usage -*/ - -void Usage( void ) -{ - fprintf( stderr, "Usage: i2c [options] i2c-addr cmd [cmd-arguments]\n" ); - fprintf( stderr, "Send I2C commands\n" ); - fprintf( stderr, "\n" ); - fprintf( stderr, "The following commands are supported:\n" ); - fprintf( stderr, "ReadByte addr Retrieves byte(s) starting at the indicated address\n" ); - fprintf( stderr, "WriteByte addr data Write byte(s) starting at the indicated address\n" ); - fprintf( stderr, "ReadByte2 addr Retrieves two bytes from the indicated address\n" ); - fprintf( stderr, "WriteByte2 addr data Writes two bytes into the indicated address\n" ); - fprintf( stderr, "ReadByte4 addr Retrieves four bytes from the indicated address\n" ); - fprintf( stderr, "WriteByte4 addr data Writes four bytes into the indicated address\n" ); - fprintf( stderr, "RecvByte Retrieves byte(s)(no address specified)\n" ); - fprintf( stderr, "SendByte data Writes byte(s)(no address specified)\n" ); - fprintf( stderr, "RecvByte2 Retrieves 2 bytes (no address specified)\n" ); - fprintf( stderr, "SendByte2 data Writes 2 bytes(no address specified)\n" ); - fprintf( stderr, "RecvByte4 Retrieves 4 bytes (no address specified)\n" ); - fprintf( stderr, "SendByte4 data Writes 4 bytes(no address specified)\n" ); - fprintf( stderr, "\n" ); - fprintf( stderr, "The above commands can be shortened to rb, wb, rb2, wb2, rb4, wb4, vb, sd, vb2 sb2 vb4, and sb4 \n" ); - fprintf( stderr, "respectively.\n" ); - fprintf( stderr, "\n" ); - fprintf( stderr, "The following options may be used:\n" ); - fprintf( stderr, "--count=n Specifies how many bytes to read for ReadByte or RecvByte\n" ); - fprintf( stderr, "--version Prints the SVN version of this program\n" ); - fprintf( stderr, "--verbose Print additional information\n" ); - fprintf( stderr, "--help Prints this information\n" ); -} - diff --git a/packages/i2c/files/i2c.h b/packages/i2c/files/i2c.h deleted file mode 100644 index bbfd276cec..0000000000 --- a/packages/i2c/files/i2c.h +++ /dev/null @@ -1,135 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2006 Dave Hylands -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* Alternatively, this software may be distributed under the terms of BSD -* license. -* -* See README and COPYING for more details. -* -****************************************************************************/ -/** -* -* @file i2c.h -* -* @brief Global definitions for interfacing with the AVR TWI (aka I2C) -* hardware -* -****************************************************************************/ -/** -* @defgroup xxx Readable version of xxx. -* -* @brief Brief description of what xxx does. -* -* Longer description of what xxx does. -* -****************************************************************************/ - -#if !defined( I2C_H ) -#define I2C_H /**< Include Guard */ - -/* ---- Include Files ---------------------------------------------------- */ - -#include - -#if !defined( CONFIG_H ) -# include "Config.h" -#endif - - -/** - * @addtogroup I2C - * @{ - */ - -/* ---- Constants and Types ---------------------------------------------- */ - -/** - * Error Codes - */ - -#define I2C_ERROR_NONE 0 // No Error -#define I2C_ERROR_ADDR_NACK -1 // No response to SLA+R/W -#define I2C_ERROR_DATA_NACK -2 // NACK during data transmission -#define I2C_ERROR_ARBITRATION_LOST -3 // Lost arbitration -#define I2C_ERROR_BAD_LEN -4 // Length is wonky -#define I2C_ERROR_BAD_CRC -5 // CRC failed -#define I2C_ERROR_BUS_ERROR -6 // Someting weird on the i2c bus - -typedef int8_t I2C_Error_t; - -/** - * Since we're loosely following the SMBus spec, we restrict the amount - * of data in each transaction to 32 bytes. - */ - -#define I2C_MAX_DATA_LEN 32 - -/** - * I2C_Addr_t can contain the address of any device on the bus. This - * module only supports 7 bit addressing. - */ - -typedef uint8_t I2C_Addr_t; - -/** - * The I2C_CRC macro can be used to remove all CRC support at compile time. - */ - -#if CFG_I2C_USE_CRC -# define I2C_CRC(x) x -#else - -# define I2C_CRC(x) -#endif - - -/** - * I2C_Data_t encapsulates the data being read or written on the i2c bus. - * This module follows the SMBus spec, whihch specifies a maximum payload - * of 32 bytes. - */ - -typedef struct -{ -#if CFG_I2C_USE_CRC - uint8_t m_crc; -#endif - - - // For reads, m_len is the number of bytes actually read (doesn't include - // the CRC - if present). If a block transfer was performed which has a - // length byte, this length will include the length byte. - - uint8_t m_len; - - // Note: Under SMBus, a block write can consist of a command, a length, - // 32 bytes of payload, and a CRC. - // - // A read response can consist of a length, 32 bytes of data, and a CRC. - - uint8_t m_data[ I2C_MAX_DATA_LEN + 2]; // +1 for the command, +1 for length - -} I2C_Data_t; - -/* ---- Variable Externs ------------------------------------------------- */ - -/** - * Description of variable. - */ - -/* ---- Function Prototypes ---------------------------------------------- */ - -/* - * Just include prototypes here. Put full descriptions in the .c files. - */ - -/** @} */ - -#endif /* I2C_H */ - - diff --git a/packages/i2c/files/i2c.init b/packages/i2c/files/i2c.init deleted file mode 100755 index 957ce68c7b..0000000000 --- a/packages/i2c/files/i2c.init +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh -# -# Start i2c support -# - -start() { - echo "Starting i2c..." - - /sbin/modprobe i2c-pxa - /sbin/modprobe i2c-dev -} -stop() { - echo "Stopping i2c..." - -} -restart() { - stop - start -} - -case "$1" in - start) - start - ;; - stop) - stop - ;; - restart) - restart - ;; - *) - echo $"Usage: $0 {start|stop|restart}" - exit 1 -esac - -exit $? - diff --git a/packages/i2c/i2c.bb b/packages/i2c/i2c.bb deleted file mode 100644 index 69b4c1cc32..0000000000 --- a/packages/i2c/i2c.bb +++ /dev/null @@ -1,45 +0,0 @@ -DESCRIPTION = "i2c init file and command line tool" -SECTION = "base" -PRIORITY = "required" -PR = "r2" - -SRC_URI = " \ - file://Config.h \ - file://Crc8.h \ - file://Crc8.c \ - file://DumpMem.h \ - file://DumpMem.c \ - file://Log.h \ - file://Log.c \ - file://i2c-api.h \ - file://i2c-api.c \ - file://i2c-dev.h \ - file://i2c-io.h \ - file://i2c-io-api.h \ - file://i2c.h \ - file://i2c.c \ - file://i2c.init \ - " - -S = "${WORKDIR}" - -do_compile () { - ${CC} -o i2c *.c -} - -do_install () { - install -d ${D}${bindir}/ - install -m 0755 ${WORKDIR}/i2c ${D}${bindir}/ - - install -d ${D}${sysconfdir}/init.d/ - install -m 0755 ${WORKDIR}/i2c.init ${D}${sysconfdir}/init.d/i2c -} - -inherit update-rc.d -INITSCRIPT_NAME = "i2c" -INITSCRIPT_PARAMS = "defaults 90" - -PACKAGES = "${PN}" -FILES_${PN} = "${bindir}/*" -FILES_${PN} += "${sysconfdir}/*" - -- cgit v1.2.3