From 777f31f8b64a8a0f2091a37b58fc6b4e3b9d8bad Mon Sep 17 00:00:00 2001 From: Cliff Brake Date: Wed, 26 Sep 2007 19:43:43 +0000 Subject: compulab-pxa270.conf: fix --pad option for making jffs2 images --- conf/machine/compulab-pxa270.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'conf/machine') diff --git a/conf/machine/compulab-pxa270.conf b/conf/machine/compulab-pxa270.conf index e6199f7e23..c8aad0934b 100644 --- a/conf/machine/compulab-pxa270.conf +++ b/conf/machine/compulab-pxa270.conf @@ -23,7 +23,7 @@ SERIAL_CONSOLE ?= "38400 ttyS1" ROOT_FLASH_SIZE ?= "32" # for NAND flash. -EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pad=0x20000 --no-cleanmarkers;\ +EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pad --no-cleanmarkers;\ sumtool -i ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \ -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs-summary.jffs2 \ -e 0x20000 -p; \ -- cgit v1.2.3 From 23fdb357ff8b1ce2c629bef826bc32c027fb1932 Mon Sep 17 00:00:00 2001 From: Cliff Brake Date: Wed, 26 Sep 2007 21:04:41 +0000 Subject: compulab-pxa270-2.6.22: fix kernel command line, add support for W module --- conf/machine/compulab-pxa270.conf | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'conf/machine') diff --git a/conf/machine/compulab-pxa270.conf b/conf/machine/compulab-pxa270.conf index c8aad0934b..1b802890b1 100644 --- a/conf/machine/compulab-pxa270.conf +++ b/conf/machine/compulab-pxa270.conf @@ -11,13 +11,21 @@ PACKAGE_EXTRA_ARCHS = "armv4 armv5te" require conf/machine/include/tune-xscale.inc +# console serial port. If you have a L module +# the below works. If you have a W module, add +# the following line to your local.conf: +# CMX270_CONSOLE_SERIAL_PORT = "ttyS0" + +# the following is for the cm-x270 L module +CMX270_CONSOLE_SERIAL_PORT ?= "ttyS1" + # used by sysvinit_2 package, so rebuild this # package if you change the SERIAL_CONSOLE setting # the following is the for the cm-x270 L module # I think the W module would use ttyS0, but has # not been tested. This can be overwritten in # local.conf -SERIAL_CONSOLE ?= "38400 ttyS1" +SERIAL_CONSOLE ?= "38400 ${CMX270_CONSOLE_SERIAL_PORT}" # used by opie-collections.inc ROOT_FLASH_SIZE ?= "32" @@ -37,7 +45,7 @@ MACHINE_FEATURES = "kernel26 pcmcia usbhost usbgadget pcmcia touchscreen alsa" # to program the compulab NAND flash, the following scheme is suggested. Create # a small rootfs that can fit in NOR flash using the following config: # - Angstrom distro -# - uclibc +# - uclibc (set ANGSTROM_MODE = "uclibc" in local.conf) # - angstrom-minimal-image-with-mtd-utils bitbake target # - put the following in your local.conf # - IMAGE_FSTYPES = "jffs2 tar cpio.gz" -- cgit v1.2.3 From 6de3b616092096268d10094576dba7c902210d5c Mon Sep 17 00:00:00 2001 From: Cliff Brake Date: Wed, 26 Sep 2007 21:40:22 +0000 Subject: compulab-pxa270 2.6.22: add kernel cmdline for jffs2 rootfs note, this still works with the initramfs as well as the initramfs will always be mounted if present --- conf/machine/compulab-pxa270.conf | 3 +++ 1 file changed, 3 insertions(+) (limited to 'conf/machine') diff --git a/conf/machine/compulab-pxa270.conf b/conf/machine/compulab-pxa270.conf index 1b802890b1..ff0eb42a11 100644 --- a/conf/machine/compulab-pxa270.conf +++ b/conf/machine/compulab-pxa270.conf @@ -52,5 +52,8 @@ MACHINE_FEATURES = "kernel26 pcmcia usbhost usbgadget pcmcia touchscreen alsa" # now, when you build the image, a cpio.gz will be generated # that can be used as an initramfs. You can boot into this image and then # program the main rootfs jffs2 image in NAND flash using mtd-utils +# you can select booting the initramfs, or the main nand rootfs by using +# the "ramdisk on", or "ramdisk off" commands in the bootloader +# -- cgit v1.2.3