From 2c35ddb8949a8db25e9a0da5eb72146a6191cacf Mon Sep 17 00:00:00 2001 From: Michael Lauer Date: Fri, 14 Jul 2006 15:11:06 +0000 Subject: conf/distro cleanup. conf/distro should only contain files that are ok to be directly included by means of setting DISTRO. conf/distro/include should contain those which doesn't. --- conf/distro/include/slugos.conf | 195 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 conf/distro/include/slugos.conf (limited to 'conf/distro/include/slugos.conf') diff --git a/conf/distro/include/slugos.conf b/conf/distro/include/slugos.conf new file mode 100644 index 0000000000..c2b169106f --- /dev/null +++ b/conf/distro/include/slugos.conf @@ -0,0 +1,195 @@ +#@TYPE: Distribution +#@NAME: SlugOS +#@DESCRIPTION: SlugOS Linux Distribution for the NSLU2 + +# WARNING: this file should not be used directly, use one of +# the supported slugos-???.conf instead: + +# Explanation of the naming +# +# slugos-dist - the base distro configuration for an NSLU2 +# slugos-[bl][at][gu] - a specific configuration encoded as follows: +# +# b or l - big or little endian +# set ARCH_BYTE_SEX to match +# +# a or t - ARM or Thumb instructions in the low level libraries +# set ARM_INSTRUCTION_SET to match +# +# g or u - glibc or uclibc libc implementation +# set TARGET_OS to match +# +# The following names are deprecated: +# +# openslug - the historical name of a canonical slugos-bag distro +# also the name of a standard slugos-bag distro with a package feed +# ucslugc - the historical (and obsolete) name of slugos-btu +# also the name of a standard slugos-btu distro with a package feed +# + +#---------------------------------------------------------------------------------- +# STANDARD SLUGOS DEFINITIONS +#---------------------------------------------------------------------------------- +# The following must be set in the top level distro file: +# +#DISTRO_NAME +#DISTRO_TYPE + +# The following may be overridden to make sub-versions +SLUGOS_VERSION = "4.0" +DISTRO_REVISION ?= "" +DISTRO_VERSION ?= "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}" +# For release (only): +# DISTRO_FEED ?= "${SLUGOS_VERSION}-${DISTRO_TYPE}" +DISTRO_FEED ?= "unstable" + +# The following must also be set, they define the basic format of the build +# +#ARCH_BYTE_SEX "be" or "le" +#ARM_INSTRUCTION_SET "arm" or "thumb" +#TARGET_OS "linux" or "linux-uclibc" +#SLUGOS_IMAGESEX "big-endian" or "little-endian" (JFFS2 format) + +# The following need not be set, the defaults should be adequate +#USE_NLS = "no" or "yes" +USE_NLS ?= "no" + +# To make errors easier to identify: +DISTRO_NAME ?= "INVALID-${ARCH_BYTE_SEX}-${ARM_INSTRUCTION_SET}-${TARGET_OS}" +DISTRO_TYPE ?= "INVALID" + +# The following must not be changed. +TARGET_FPU = "soft" + +# glib-2.0 builds require USE_NLS to be overridden +USE_NLS_glib-2.0 = "yes" + +INHERIT += "package_ipk debian" + +DISTRO_BASE = ":slugos" + +# packages/meta/slugos-image.bb generates a binary image of the root file system +# with a name controlled by the following setting - it defaults to the top level +# ${DISTRO_NAME} and this should always be correct, but it may be too specific (e.g. +# if you change the DISTRO from one of the standard ones in a way which does not +# change the generated image). +SLUGOS_IMAGENAME ?= "${DISTRO_NAME}" + +# pull in the frozen list of bbfiles - this sets BBFILES and this will override any +# setting in local.conf Since this depends on ${DISTRO} it doesn't actually do +# anything by default unless conf/distro/${DISTRO}-packages.conf exists. +# require conf/distro/include/freeze.conf + +#---------------------------------------------------------------------------------- +# FEEDS +# The FEED_URIS lines define where on the internet SlugOS looks for packages +# when downloading new packages or updating existing packages. Additional feeds +# (such as a local feed) can be defined in local.conf +#---------------------------------------------------------------------------------- +# Add to the user's feeds from local.conf (there may be none). +# In general slugos-[bl][at][gu] is sufficient to identify a set of packages which +# will work on any derived distro. The slugos-???.conf files set the FEED_URIS to +# an appropriate ipkg.nslu2-linux.org default if nslu2-linux is actually building +# such a feed: +# +#FEED_URIS_append += "cross##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/cross/${DISTRO_FEED}" +#FEED_URIS_append += "native##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/native/${DISTRO_FEED}" +# +# When such a feed exists the corresponding 'unstable' feed will normally also +# exist - the packages in unstable are the latest but very unlikely to be the +# greatest. Use at your own risk! +# +#FEED_URIS_append += "unstable_cross##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/cross/unstable" +#FEED_URIS_append += "unstable_native##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/native/unstable" + +#---------------------------------------------------------------------------------- +# FIRMWARE CONFIGURATION +#---------------------------------------------------------------------------------- +# IMAGE BUILD OPTIONS +# ------------------- +# CMDLINE* macros define the kernel command line. CMDLINE_DEBUG is provided +# to enable/disable debugging in the distro. Here noirqdebug is used to +# remove the messages about unhandled interrupts - people debugging interrupt +# issues in the kernel need to cancel this (set CMDLINE_DEBUG empty in local.conf) +CMDLINE_DEBUG = "noirqdebug" + +# Building a full image. If you set SLUGOS_FLASH_IMAGE to "yes" a complete +# 8MByte flash image will be built after the rootfs JFFS2 image. +# +# If you do this you will need to find a source for the LinkSys software to be +# placed in the full image - 'RedBoot' (the boot loader), 'Trailer' (just a bunch +# of bytes to flag the image as valid) and 'SysConf' (actually just a block of +# unset data - you could modify this to pre-configure the SysConf partition of the +# image). If you own an NSLU2 then this data is already in the flash of the NSLU2 +# and you can download it (including new versions) from the LinkSys web site - see +# packages/meta/slugos-image.bb for information about where to put the downloaded +# data. +SLUGOS_FLASH_IMAGE ?= "no" + +# EXTRA PACKAGES +# -------------- +# SlugOS builds an image with no extra packages - to add packages to the +# firmware include this file in a new 'distro' configuration file) and set +# the definition below to include the requirements. +# NOTE: as built this system will *not* be able to boot off anything other than +# the flash file system ('turnup' will not work). You need to add the filesystem +# modules for your chosen root file system (and any others which will be used). +# See openslug.conf for a more full-featured system! +# +# Everything in this list gets added to the flash image, along with any RDEPENDS +# it has itself! +SLUGOS_EXTRA_RDEPENDS ?= "" + +#---------------------------------------------------------------------------------- +# PACKAGE VERSION CONTROL +#---------------------------------------------------------------------------------- +# Define how to bootstrap the system - we need cross compilers. It is also +# necessary to define which gets generated first, glibc or the kernel, and +# this is done by selecting the provider of libc (in this case it needs the +# kernel, so there has to be a non-libc gcc to build the kernel!) +PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" +PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc:gcc-cross" +PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}g++:gcc-cross" +PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc" +# Select 2.6 versions of the depmod support +PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross" +PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc" + +# compiler/binary/library versions (unslung uses different ones so these +# cannot be in ${MACHINE}.conf) +PREFERRED_VERSION_binutils ?= "2.16" +PREFERRED_VERSION_binutils-cross ?= "2.16" +PREFERRED_VERSION_gcc-cross-initial ?= "4.1.1" +PREFERRED_VERSION_gcc-cross ?= "4.1.1" +PREFERRED_VERSION_gcc ?= "4.1.1" +PREFERRED_VERSION_glibc ?= "2.3.5+cvs20050627" +#For SVN uclibc: +#SRCDATE_uclibc ?= "20060120" +#PREFERRED_VERSION_uclibc ?= "0.9.28+svn${SRCDATE_uclibc}" + +# Select the correct versions of the kernel and modules (these are the +# defaults, override in the conf/distro top-level distro file). +PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel" +PREFERRED_VERSION_ixp4xx-kernel ?= "2.6.17" + +# Built-in ethernet modules +PREFERRED_PROVIDER_virtual/ixp-eth ?= "ixp400-eth" +PREFERRED_VERSION_ixp4xx-csr ?= "2.1" +PREFERRED_VERSION_ixp-osal ?= "2.1" +PREFERRED_VERSION_ixp400-eth ?= "1.5" + +# Select the smallest provider of x11 libraries +PREFERRED_PROVIDER_libx11 ?= "diet-x11" +SRCDATE_diet-x11 ?= "20060106" + +# Latest wpa-supplicant which supports madwifi-ng +PREFERRED_VERSION_wpa-supplicant ?= "0.5.1" + +# Ensure consistency across all SlugOS builds for the provider of a +# relational database - use the latest version of the SleepyCat +# Berkeley database +PREFERRED_PROVIDER_virtual/db = "db" +PREFERRED_PROVIDER_virtual/db-native = "db-native" + +#FIXME: HACK: REMOVE THIS +IGNORE_STRIP_ERRORS = "" -- cgit v1.2.3