From ed3a584c445dc6b68db8ce1ff246d64c16ea6fdb Mon Sep 17 00:00:00 2001
From: Rod Whitby <rod@whitby.id.au>
Date: Sat, 10 Mar 2007 15:27:06 +0000
Subject: task-slugos: Changed a lot of packages in the rootfs from RDEPENDS to
 RRECOMMENDS

---
 packages/tasks/task-slugos.bb | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/packages/tasks/task-slugos.bb b/packages/tasks/task-slugos.bb
index 2fd4ad0473..92820e069c 100644
--- a/packages/tasks/task-slugos.bb
+++ b/packages/tasks/task-slugos.bb
@@ -6,7 +6,7 @@
 DESCRIPTION = "Task packages for the SlugOS distribution"
 HOMEPAGE = "http://www.nslu2-linux.org"
 LICENSE = "MIT"
-PR = "r4"
+PR = "r5"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 ALLOW_EMPTY = "1"
 
@@ -18,6 +18,7 @@ ALLOW_EMPTY = "1"
 # The standard firmware contents and additional packages built as requirements
 # of the firmware are defined here in SLUGOS_STANDARD_RDEPENDS.
 SLUGOS_STANDARD_RDEPENDS = ""
+SLUGOS_STANDARD_RRECOMMENDS = ""
 
 # diff, cpio and find are required for reflash and turnup ram.
 # Removing these probably leaves the system bootable, but standard
@@ -27,17 +28,17 @@ SLUGOS_STANDARD_RDEPENDS = ""
 # udev is the default way of handling devices, there is no guarantee
 # that the static device table is completely correct (it is just
 # known to be sufficient for boot.)
-SLUGOS_STANDARD_RDEPENDS += "diffutils cpio findutils udev"
+SLUGOS_STANDARD_RRECOMMENDS += "diffutils cpio findutils udev"
 
 # These lines add support for formatting ext2 and ext3 file systems
 # on a hard disk attached to the NSLU2.  ext3 is the standard Linux
 # file system.
-SLUGOS_STANDARD_RDEPENDS += "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck e2fsprogs-badblocks"
+SLUGOS_STANDARD_RRECOMMENDS += "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck e2fsprogs-badblocks"
 
 # These lines add support for an X/Y/ZModem package called lrzsz
 # (this is of use for people with modified NSLU2 hardware which
 # supports a serial port.)
-SLUGOS_STANDARD_RDEPENDS += "lrzsz"
+SLUGOS_STANDARD_RRECOMMENDS += "lrzsz"
 
 # Filesystem selection.  Adding entries here adds the module to the
 # image.  The module must be built as part of nslu2-kernel (i.e. it
@@ -55,7 +56,7 @@ SLUGOS_STANDARD_RDEPENDS += "lrzsz"
 # NOTE: removing kernel-module-nfs from this list will prevent NFS
 # boot (however you can do a simple flash file system boot - no
 # attached disk - and install the nfs modules from ssh.)
-SLUGOS_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RRECOMMENDS += "\
 kernel-module-ext2 \
 kernel-module-jbd \
 kernel-module-ext3 \
@@ -67,31 +68,25 @@ kernel-module-nls-cp437 \
 kernel-module-nls-utf8 \
 "
 
-# Until it becomes clear which of the ntfs drivers is the better
-# solution, the Linux ntfs driver is commented out.
-#SLUGOS_STANDARD_RDEPENDS += "\
-#kernel-module-ntfs \
-#"
-
 # Add daemon required for HW RNG support
-SLUGOS_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RRECOMMENDS += "\
 rng-tools \
 "
 
 # Add modules required for usb support
-SLUGOS_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RRECOMMENDS += "\
 kernel-module-ohci-hcd \
 kernel-module-uhci-hcd \
 "
 
 # Add modules required for IDE support
-SLUGOS_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RRECOMMENDS += "\
 kernel-module-libata \
 kernel-module-pata-artop \
 "
 
 # Add modules required for Network support
-SLUGOS_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RRECOMMENDS += "\
 kernel-module-via-velocity \
 "
 
@@ -99,20 +94,20 @@ kernel-module-via-velocity \
 # NOTE: This module is desirable for systems lacking a physical
 # console, but is usually only enabled if specific needs or issues
 # arise.  If space in the flash is at a premium, it can be omitted.
-SLUGOS_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RRECOMMENDS += "\
 kernel-module-netconsole \
 "
 
 DEPENDS += "${DISTRO_EXTRA_DEPENDS}"
 
-RDEPENDS += "kernel ixp4xx-npe \
+RDEPENDS += "\
+	kernel ixp4xx-npe \
 	base-files base-passwd netbase \
         busybox initscripts-slugos slugos-init \
         update-modules sysvinit tinylogin \
 	module-init-tools modutils-initscripts \
         ipkg-collateral ipkg ipkg-link \
 	portmap \
-	dropbear \
 	beep \
 	e2fsprogs-blkid \
 	util-linux-mount \
@@ -122,4 +117,7 @@ RDEPENDS += "kernel ixp4xx-npe \
 	${SLUGOS_STANDARD_RDEPENDS} \
 	${DISTRO_EXTRA_RDEPENDS}"
 
-RRECOMMENDS = "${DISTRO_EXTRA_RRECOMMENDS}"
+RRECOMMENDS += "\
+	dropbear \
+	${SLUGOS_STANDARD_RRECOMMENDS} \
+	${DISTRO_EXTRA_RRECOMMENDS}"
-- 
cgit v1.2.3