From 81d60d223becf845ecc2a035648f9effd2437d0e Mon Sep 17 00:00:00 2001 From: Paul Sokolovsky Date: Sat, 16 Feb 2008 16:09:19 +0000 Subject: linux-handhelds-2.6: More elaboration to HaRET's sample startup.txt. --- packages/linux/linux-handhelds-2.6.inc | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/packages/linux/linux-handhelds-2.6.inc b/packages/linux/linux-handhelds-2.6.inc index 81af72e413..a0aec9cb36 100644 --- a/packages/linux/linux-handhelds-2.6.inc +++ b/packages/linux/linux-handhelds-2.6.inc @@ -88,20 +88,27 @@ set cmdline "root=/dev/mmcblk0p2 rootdelay=10 console=ttyS0,115200n8 console=tty ## Choice 2 - Boot from CF card, setup like above #set cmdline "root=/dev/hda2 rootdelay=10 console=ttyS0,115200n8 console=tty0" -## Choice 3 - Boot rootfs image as initramfs (works only for smaller images) +## Choice 3 - Boot kernel with builtin interactive bootloader (initramfs-bootmenu-image) +# rootdelay is a wait before scanning for the available partitions +# if root= is also specified, interactive selection will be skipped and +# direct boot will happen. +#set cmdline "rootdelay=3 console=ttyS0,115200n8 console=tty0" + +## Choice 4 - Boot rootfs image as initramfs (works only for smaller images) # have a cpio.gz file below together with zImage, no EXT2 partition required #set initrd ".rootfs.cpio.gz" #set cmdline "rdinit=/sbin/init console=ttyS0,115200n8 console=tty0" -## Choice 4 - Boot via NFS over USB networking (must be kernel-builtin) +## Choice 5 - Boot via NFS over USB networking (must be kernel-builtin +# or initramfs-*-image works too) # 192.168.x.x - Server address (the other side) # 192.168.y.y - Handheld's address #set cmdline "root=/dev/nfs nfsroot=192.168.x.x: ip=192.168.y.y:192.168.x.x:192.168.x.x:255.255.255.0:pda:usb0 console=ttyS0,115200n8 console=tty0" -## Choice 5 - Boot from MTD partition, for devices with lots of flash +## Choice 6 - Boot from MTD partition, for devices with lots of flash # to have both WinCE and Linux there. Note the value of root param, # that's how it should be, not "/dev/mtdblockN". -# set cmdline "root=mtdN console=ttyS0,115200n8 console=tty0" +#set cmdline "root=mtdN console=ttyS0,115200n8 console=tty0" bootlinux EOF -- cgit v1.2.3