diff options
Diffstat (limited to 'recipes/linux')
-rw-r--r-- | recipes/linux/linux-omap-pm/beagle-writable-uboot.diff | 10 | ||||
-rw-r--r-- | recipes/linux/linux-omap-pm/beagleboard/ehci.patch | 155 | ||||
-rw-r--r-- | recipes/linux/linux-omap-pm_git.bb | 2 |
3 files changed, 47 insertions, 120 deletions
diff --git a/recipes/linux/linux-omap-pm/beagle-writable-uboot.diff b/recipes/linux/linux-omap-pm/beagle-writable-uboot.diff new file mode 100644 index 0000000000..7c5a36df9e --- /dev/null +++ b/recipes/linux/linux-omap-pm/beagle-writable-uboot.diff @@ -0,0 +1,10 @@ +--- a/arch/arm/mach-omap2/board-omap3beagle.c 2009-07-08 16:30:01.000000000 -0700 ++++ b/arch/arm/mach-omap2/board-omap3beagle.c 2009-07-13 13:56:37.000000000 -0700 +@@ -68,7 +68,6 @@ static struct mtd_partition omap3beagle_ + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, +- .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", diff --git a/recipes/linux/linux-omap-pm/beagleboard/ehci.patch b/recipes/linux/linux-omap-pm/beagleboard/ehci.patch index 5a8c84471b..c55ff601c4 100644 --- a/recipes/linux/linux-omap-pm/beagleboard/ehci.patch +++ b/recipes/linux/linux-omap-pm/beagleboard/ehci.patch @@ -1,131 +1,46 @@ -Index: git/arch/arm/mach-omap2/board-omap3beagle.c -=================================================================== ---- git.orig/arch/arm/mach-omap2/board-omap3beagle.c -+++ git/arch/arm/mach-omap2/board-omap3beagle.c -@@ -154,6 +154,7 @@ static int beagle_twl_gpio_setup(struct +From f8f10f496bce396416d7156da876222c6ce8c341 Mon Sep 17 00:00:00 2001 +From: Steven Kipisz <skipisz@beagleboard.org> +Date: Wed, 9 Jan 2009 12:01:11 -0600 +Subject: [PATCH-USB] Omap3 beagleboard: add support for EHCI in revision C1 boards + +Signed-off-by: Jason Kridner <jkridner@beagleboard.org> +--- + arch/arm/mach-omap2/board-omap3beagle.c | 10 +--------- + arch/arm/mach-omap2/usb-ehci.c | 4 +--- + drivers/usb/host/ehci-omap.c | 26 ++++++++++++++++++++++++++ + 3 files changed, 28 insertions(+), 12 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index fe97bab..de81153 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -140,15 +140,7 @@ static int beagle_twl_gpio_setup(struct device *dev, * power switch and overcurrent detect */ -+#if 0 /* TODO: This needs to be modified to not rely on u-boot */ - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - -@@ -163,7 +164,7 @@ static int beagle_twl_gpio_setup(struct - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; +- gpio_request(gpio + 1, "EHCI_nOC"); +- gpio_direction_input(gpio + 1); - -+#endif +- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ +- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); +- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); +- +- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ +- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; ++ /* TODO: This needs to be modified to not rely on u-boot */ + return 0; } +--- /tmp/usb-ehci.c 2009-07-30 13:14:34.000000000 +0200 ++++ git/arch/arm/mach-omap2/usb-ehci.c 2009-07-30 13:16:03.000000000 +0200 +@@ -170,9 +170,7 @@ -Index: git/arch/arm/mach-omap2/usb-ehci.c -=================================================================== ---- git.orig/arch/arm/mach-omap2/usb-ehci.c -+++ git/arch/arm/mach-omap2/usb-ehci.c -@@ -147,9 +147,11 @@ static void setup_ehci_io_mux(void) + platform_device_add_data(&ehci_device, &pdata, sizeof(pdata)); - void __init usb_ehci_init(void) - { -+#if 0 /* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */ - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) - setup_ehci_io_mux(); -+#endif +- /* Setup Pin IO MUX for EHCI */ +- if (cpu_is_omap34xx()) +- setup_ehci_io_mux(); ++ /* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */ if (platform_device_register(&ehci_device) < 0) { printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); -Index: git/drivers/usb/host/ehci-omap.c -=================================================================== ---- git.orig/drivers/usb/host/ehci-omap.c -+++ git/drivers/usb/host/ehci-omap.c -@@ -48,16 +48,25 @@ - * to get the PHY state machine in working state - */ - #define EXTERNAL_PHY_RESET -+#ifdef CONFIG_MACH_OMAP3_BEAGLE -+#define EXT_PHY_RESET_GPIO_PORT2 (147) -+#else - #define EXT_PHY_RESET_GPIO_PORT1 (57) - #define EXT_PHY_RESET_GPIO_PORT2 (61) -+#endif - #define EXT_PHY_RESET_DELAY (10) - -+#define PHY_STP_PULLUP_ENABLE (0x10) -+#define PHY_STP_PULLUP_DISABLE (0x90) -+ - /* ISSUE2: - * USBHOST supports External charge pump PHYs only - * Use the VBUS from Port1 to power VBUS of Port2 externally - * So use Port2 as the working ULPI port - */ -+#ifndef CONFIG_MACH_OMAP3_BEAGLE - #define VBUS_INTERNAL_CHARGEPUMP_HACK -+#endif - - #endif /* CONFIG_OMAP_EHCI_PHY_MODE */ - -@@ -225,14 +234,43 @@ static int omap_start_ehc(struct platfor - - #ifdef EXTERNAL_PHY_RESET - /* Refer: ISSUE1 */ -+#ifndef CONFIG_MACH_OMAP3_BEAGLE - gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset"); - gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0); -+#endif - gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset"); - gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0); -+ gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 0); - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(EXT_PHY_RESET_DELAY); - #endif - -+ /* -+ * The PHY register 0x7 - Interface Control register is -+ * configured to disable the integrated STP pull-up resistor -+ * used for interface protection. -+ * -+ * May not need to be here. -+ */ -+ omap_writel((0x7 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* interface reg */ -+ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */ -+ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */ -+ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */ -+ (PHY_STP_PULLUP_DISABLE), -+ EHCI_INSNREG05_ULPI); -+ -+ while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT))); -+ -+ /* Force PHY to HS */ -+ omap_writel((0x4 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* function ctrl */ -+ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */ -+ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */ -+ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */ -+ (0x40), -+ EHCI_INSNREG05_ULPI); -+ -+ while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT))); -+ - /* Configure TLL for 60Mhz clk for ULPI */ - ehci_clocks->usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK); - if (IS_ERR(ehci_clocks->usbtll_fck_clk)) -@@ -307,7 +345,9 @@ static int omap_start_ehc(struct platfor - * Hold the PHY in RESET for enough time till PHY is settled and ready - */ - udelay(EXT_PHY_RESET_DELAY); -+#ifndef CONFIG_MACH_OMAP3_BEAGLE - gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1); -+#endif - gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1); - #endif - -@@ -393,7 +433,9 @@ static void omap_stop_ehc(struct platfor - - - #ifdef EXTERNAL_PHY_RESET -+#ifndef CONFIG_MACH_OMAP3_BEAGLE - gpio_free(EXT_PHY_RESET_GPIO_PORT1); -+#endif - gpio_free(EXT_PHY_RESET_GPIO_PORT2); - #endif - diff --git a/recipes/linux/linux-omap-pm_git.bb b/recipes/linux/linux-omap-pm_git.bb index 43527cd093..574e0a3ca6 100644 --- a/recipes/linux/linux-omap-pm_git.bb +++ b/recipes/linux/linux-omap-pm_git.bb @@ -23,6 +23,7 @@ SRC_URI_append = " \ file://fix-install.patch;patch=1 \ file://fix-musb-oops.diff;patch=1 \ file://fix-mtd.diff;patch=1 \ + file://ehci.patch;patch=1 \ file://dss2/0001-OMAPFB-move-omapfb.h-to-include-linux.patch;patch=1 \ file://dss2/0002-DSS2-OMAP2-3-Display-Subsystem-driver.patch;patch=1 \ file://dss2/0003-DSS2-OMAP-framebuffer-driver.patch;patch=1 \ @@ -172,6 +173,7 @@ SRC_URI_append = " \ " SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \ + file://beagle-writable-uboot.diff;patch=1 \ " SRC_URI_append_omap3evm = " \ |