diff options
Diffstat (limited to 'recipes/linux/linux-omap-2.6.29/omap3-touchbook')
5 files changed, 1203 insertions, 379 deletions
diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/board-omap3touchbook.c b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/board-omap3touchbook.c new file mode 100644 index 0000000000..0296944f83 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/board-omap3touchbook.c @@ -0,0 +1,739 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3touchbook.c + * + * Copyright (C) 2009 Always Innovating + * + * Modified from mach-omap2/board-omap3beagleboard.c + * + * Initial code: Grégoire Gentil, Tim Yamin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <mach/mcspi.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/mma7455l.h> + +#include <mach/dmtimer.h> +#include <linux/backlight.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> +#include <linux/omapfb.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/board.h> +#include <mach/usb.h> +#include <mach/common.h> +#include <mach/gpmc.h> +#include <mach/nand.h> +#include <mach/mux.h> +#include <mach/display.h> + +#include "twl4030-generic-scripts.h" +#include "mmc-twl4030.h" + + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define OMAP3_AC_GPIO 136 //Int1 DRDY +#define OMAP3_TS_GPIO 162 +#define TB_BL_PWM_TIMER 9 +#define TB_KILL_POWER_GPIO 168 + +static struct mtd_partition omap3touchbook_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3touchbook_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3touchbook_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3touchbook_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3touchbook_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3touchbook_nand_data, + }, + .num_resources = 1, + .resource = &omap3touchbook_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct omap_uart_config omap3_touchbook_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct twl4030_usb_data touchbook_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = 29, + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply touchbook_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply touchbook_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct gpio_led gpio_leds[]; + +static int touchbook_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + touchbook_vmmc1_supply.dev = mmc[0].dev; + touchbook_vsim_supply.dev = mmc[0].dev; + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + +#if 0 /* TODO: This needs to be modified to not rely on u-boot */ + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + return 0; +} + +static struct twl4030_gpio_platform_data touchbook_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = touchbook_twl_gpio_setup, +}; + +static struct platform_device omap3_touchbook_lcd_device = { + .name = "omap3touchbook_lcd", + .id = -1, +}; + +static struct regulator_consumer_supply touchbook_vdac_supply = { + .supply = "vdac", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +static struct regulator_consumer_supply touchbook_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data touchbook_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data touchbook_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data touchbook_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data touchbook_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdvi_supply, +}; + +static const struct twl4030_resconfig touchbook_resconfig[] = { + /* disable regulators that u-boot left enabled; the + * devices' drivers should be managing these. + */ + { .resource = RES_VAUX3, }, /* not even connected! */ + { .resource = RES_VMMC1, }, + { .resource = RES_VSIM, }, + { .resource = RES_VPLL2, }, + { .resource = RES_VDAC, }, + { .resource = RES_VUSB_1V5, }, + { .resource = RES_VUSB_1V8, }, + { .resource = RES_VUSB_3V1, }, + { 0, }, +}; + +static struct twl4030_power_data touchbook_power_data = { + .resource_config = touchbook_resconfig, + /* REVISIT can't use GENERIC3430_T2SCRIPTS_DATA; + * among other things, it makes reboot fail. + */ +}; + +static struct twl4030_bci_platform_data touchbook_bci_data = { + .tblsize = 0, + .no_backup_battery = 1, +}; + +static struct twl4030_platform_data touchbook_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &touchbook_usb_data, + .gpio = &touchbook_gpio_data, + .power = &touchbook_power_data, + .vmmc1 = &touchbook_vmmc1, + .vsim = &touchbook_vsim, + .vdac = &touchbook_vdac, + .vpll2 = &touchbook_vpll2, + + /* TouchBook BCI */ + .bci = &touchbook_bci_data, +}; + +static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &touchbook_twldata, + }, +}; + +static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("bq27200", 0x55), + }, +}; + +static int __init omap3_touchbook_i2c_init(void) +{ + /* Standard TouchBook bus */ + omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, + ARRAY_SIZE(touchbook_i2c_boardinfo)); + + /* Additional TouchBook bus */ + omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, + ARRAY_SIZE(touchBook_i2c_boardinfo)); + + return 0; +} + +static void __init omap3_ads7846_init(void) +{ + if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { + printk(KERN_ERR "Failed to request GPIO %d for " + "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); + return; + } + + gpio_direction_input(OMAP3_TS_GPIO); + omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); +} + +static struct ads7846_platform_data ads7846_config = { + .x_min = 100, + .y_min = 265, + .x_max = 3950, + .y_max = 3750, + .x_plate_ohms = 40, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 5, + .debounce_rep = 1, + .gpio_pendown = OMAP3_TS_GPIO, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, //(void *) 161, + .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), + .platform_data = &ads7846_config, + } +}; + +static void __init omap3_touchbook_init_irq(void) +{ + omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap_init_irq(); + omap_gpio_init(); +} + +static struct gpio_led gpio_leds[] = { + { + .name = "touchbook::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "touchbook::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, + { + .name = "touchbook::pmu_stat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, + { + .code = KEY_POWER, + .gpio = 183, + .desc = "power", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +/* DSS */ + +static int touchbook_enable_dvi(struct omap_display *display) +{ + if (display->hw_config.panel_reset_gpio != -1) + gpio_set_value(display->hw_config.panel_reset_gpio, 1); + + return 0; +} + +static void touchbook_disable_dvi(struct omap_display *display) +{ + if (display->hw_config.panel_reset_gpio != -1) + gpio_set_value(display->hw_config.panel_reset_gpio, 0); +} + +static struct omap_dss_display_config touchbook_display_data_dvi = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .panel_name = "panel-generic", + .u.dpi.data_lines = 24, + .panel_reset_gpio = 176, + .panel_enable = touchbook_enable_dvi, + .panel_disable = touchbook_disable_dvi, +}; + + +static int touchbook_panel_enable_tv(struct omap_display *display) +{ +#define ENABLE_VDAC_DEDICATED 0x03 +#define ENABLE_VDAC_DEV_GRP 0x20 + + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VDAC_DEDICATED, + TWL4030_VDAC_DEDICATED); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); + + return 0; +} + +static void touchbook_panel_disable_tv(struct omap_display *display) +{ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, + TWL4030_VDAC_DEDICATED); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, + TWL4030_VDAC_DEV_GRP); +} + +static struct omap_dss_display_config touchbook_display_data_tv = { + .type = OMAP_DISPLAY_TYPE_VENC, + .name = "tv", + .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .panel_enable = touchbook_panel_enable_tv, + .panel_disable = touchbook_panel_disable_tv, +}; + +static struct omap_dss_board_info touchbook_dss_data = { + .num_displays = 2, + .displays = { + &touchbook_display_data_dvi, + &touchbook_display_data_tv, + } +}; + +static struct platform_device touchbook_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &touchbook_dss_data, + }, +}; + +static void __init touchbook_display_init(void) +{ + int r; + + r = gpio_request(touchbook_display_data_dvi.panel_reset_gpio, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get DVI reset GPIO\n"); + return; + } + + gpio_direction_output(touchbook_display_data_dvi.panel_reset_gpio, 0); +} + +static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { + { OMAP_TAG_UART, &omap3_touchbook_uart_config }, +}; + +static struct platform_device *omap3_touchbook_devices[] __initdata = { + &touchbook_dss_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3touchbook_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3touchbook_nand_data.cs = nandcs; + omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3touchbook_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3touchbook_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static void __init omap3_mma7455l_init(void) +{ + int ret; + + ret = gpio_request(OMAP3_AC_GPIO, "mma7455l"); + if (ret < 0) { + printk(KERN_ERR "Failed to request GPIO %d for mma7455l IRQ\n", OMAP3_AC_GPIO); + return; + } + + gpio_direction_input(OMAP3_AC_GPIO); +} + +static struct mma7455l_platform_data mma7455l_config = { + .calibration_x = -4, //26 for Beagleboard + .calibration_y = 28, //44 for Beagleboard + .calibration_z = -28, //26 for Beagleboard +}; + +static struct omap2_mcspi_device_config mma7455l_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info omap3_mma7455l_spi_board_info[] __initdata = { + { + .modalias = "mma7455l", + .bus_num = 3, + .chip_select = 0, + .max_speed_hz = 200000, + .irq = OMAP_GPIO_IRQ(OMAP3_AC_GPIO), + .controller_data = &mma7455l_mcspi_config, //(void *) 135, + .platform_data = &mma7455l_config, + } +}; + +static int touchbook_backlight_brightness = 50; +static struct omap_dm_timer *touchbook_backlight_pwm; + +static int touchbook_backlight_read(struct backlight_device *bd) +{ + return touchbook_backlight_brightness; +} + +static int touchbook_backlight_update(struct backlight_device *bd) +{ + int value = bd->props.brightness; + touchbook_backlight_brightness = value; + + /* Frequency calculation: + - For 200Hz PWM, you want to load -164 (=> -32768Hz / 200Hz). + - Minimum duty cycle for the backlight is 15%. + - You have (164*0.85) => ~140 levels of brightness. + */ + + /* Convert from 0-100 range to 0-140 range */ + value = (value * 14) / 10 / 2; + + /* For maximum brightness, just stop the timer... */ + if(value != bd->props.max_brightness) + { + omap_dm_timer_set_load(touchbook_backlight_pwm, 1, -164); + omap_dm_timer_set_match(touchbook_backlight_pwm, 1, -24 - value); + omap_dm_timer_write_counter(touchbook_backlight_pwm, -1); + //omap_dm_timer_stop(touchbook_backlight_pwm); + omap_dm_timer_start(touchbook_backlight_pwm); + } + else + omap_dm_timer_stop(touchbook_backlight_pwm); + + + return 0; +} + +static struct backlight_ops touchbook_backlight_properties = { + .get_brightness = touchbook_backlight_read, + .update_status = touchbook_backlight_update, +}; + +static void __init omap3_touchbook_backlight_init(void) +{ + static struct backlight_device *bd; + bd = backlight_device_register("touchbook", NULL, NULL, &touchbook_backlight_properties); + + if(bd) + { + touchbook_backlight_pwm = omap_dm_timer_request_specific(TB_BL_PWM_TIMER); + omap_dm_timer_enable(touchbook_backlight_pwm); + omap_dm_timer_set_source(touchbook_backlight_pwm, OMAP_TIMER_SRC_32_KHZ); + omap_dm_timer_set_pwm(touchbook_backlight_pwm, 1, 1, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE); + + bd->props.max_brightness = 100; + bd->props.brightness = touchbook_backlight_brightness; + } + + touchbook_backlight_update(bd); +} + +static void omap3_touchbook_poweroff(void) +{ + int r; + + r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get kill power GPIO\n"); + return; + } + + gpio_direction_output(TB_KILL_POWER_GPIO, 0); +} + +static void __init omap3_touchbook_init(void) +{ + pm_power_off = omap3_touchbook_poweroff; + + omap3_touchbook_i2c_init(); + platform_add_devices(omap3_touchbook_devices, + ARRAY_SIZE(omap3_touchbook_devices)); + omap_board_config = omap3_touchbook_config; + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); + omap_serial_init(); + + omap_cfg_reg(J25_34XX_GPIO170); + + omap3touchbook_flash_init(); + touchbook_display_init(); + omap3_touchbook_backlight_init(); + + /* Touch Book */ + spi_register_board_info(omap3_ads7846_spi_board_info, ARRAY_SIZE(omap3_ads7846_spi_board_info)); + spi_register_board_info(omap3_mma7455l_spi_board_info, ARRAY_SIZE(omap3_mma7455l_spi_board_info)); + + omap3_ads7846_init(); + omap3_mma7455l_init(); + + usb_musb_init(); + usb_ehci_init(); +} + +static void __init omap3_touchbook_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(OMAP3_TOUCHBOOK, "OMAP3 Touch Book") + /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_touchbook_map_io, + .init_irq = omap3_touchbook_init_irq, + .init_machine = omap3_touchbook_init, + .timer = &omap_timer, +MACHINE_END diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig index 2ff46a4832..c6fdd4a0a4 100644 --- a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.29-omap1 -# Fri May 29 14:47:52 2009 +# Thu Aug 13 12:58:49 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -32,6 +32,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set @@ -57,7 +58,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_BUF_SHIFT=15 CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set @@ -189,8 +190,7 @@ CONFIG_ARCH_OMAP3=y # # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set -CONFIG_OMAP_SMARTREFLEX=y -# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +# CONFIG_OMAP_SMARTREFLEX is not set CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_BOOT_TAG=y CONFIG_OMAP_BOOT_REASON=y @@ -199,7 +199,7 @@ CONFIG_OMAP_BOOT_REASON=y # CONFIG_OMAP_MUX is not set CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set -# CONFIG_OMAP_IOMMU is not set +CONFIG_OMAP_IOMMU=m # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -218,9 +218,10 @@ CONFIG_ARCH_OMAP3430=y # CONFIG_MACH_OMAP_LDP is not set # CONFIG_MACH_OMAP_3430SDP is not set # CONFIG_MACH_OMAP3EVM is not set -CONFIG_MACH_OMAP3_BEAGLE=y +# CONFIG_MACH_OMAP3_BEAGLE is not set # CONFIG_MACH_OVERO is not set # CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_MACH_OMAP3_TOUCHBOOK=y # # Processor Type @@ -264,15 +265,15 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_VMSPLIT_3G is not set -CONFIG_VMSPLIT_2G=y +CONFIG_VMSPLIT_3G=y +CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0x80000000 -# CONFIG_PREEMPT is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y CONFIG_HZ=128 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -686,66 +687,8 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_TOIM3232_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -# CONFIG_ACT200L_DONGLE is not set -CONFIG_KINGSUN_DONGLE=m -CONFIG_KSDAZZLE_DONGLE=m -CONFIG_KS959_DONGLE=m - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_MCS_FIR=m -# CONFIG_OMAP_IR is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set CONFIG_BT=y CONFIG_BT_L2CAP=y CONFIG_BT_SCO=y @@ -777,18 +720,15 @@ CONFIG_AF_RXRPC=m # CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y -CONFIG_CFG80211=y +CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_NL80211=y -CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y -CONFIG_LIB80211_CRYPT_WEP=y -CONFIG_LIB80211_CRYPT_CCMP=y -CONFIG_LIB80211_CRYPT_TKIP=y # CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=y +CONFIG_MAC80211=m # # Rate control algorithm selection @@ -799,14 +739,13 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set -CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_WIMAX=m CONFIG_WIMAX_DEBUG_LEVEL=8 # CONFIG_RFKILL is not set -CONFIG_NET_9P=m -# CONFIG_NET_9P_DEBUG is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -1021,7 +960,6 @@ CONFIG_EQUALIZER=m CONFIG_TUN=m CONFIG_VETH=m # CONFIG_NET_ETHERNET is not set -CONFIG_MII=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -1030,36 +968,19 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_USB=y -# CONFIG_LIBERTAS_SDIO is not set -# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set -CONFIG_USB_ZD1201=y -CONFIG_USB_NET_RNDIS_WLAN=y -CONFIG_RTL8187=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set -CONFIG_P54_COMMON=y -CONFIG_P54_USB=y +# CONFIG_P54_COMMON is not set # CONFIG_IWLWIFI_LEDS is not set -CONFIG_HOSTAP=y -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_B43=y -CONFIG_B43_LEDS=y -# CONFIG_B43_DEBUG is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set # CONFIG_B43LEGACY is not set -CONFIG_ZD1211RW=y -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_RT2X00=y -CONFIG_RT2500USB=y -CONFIG_RT73USB=y -CONFIG_RT2X00_LIB_USB=y -CONFIG_RT2X00_LIB=y -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # WiMAX Wireless Broadband devices @@ -1070,32 +991,13 @@ CONFIG_RT2X00_LIB_LEDS=y # # USB Network Adapters # -CONFIG_USB_CATC=y -CONFIG_USB_KAWETH=y -CONFIG_USB_PEGASUS=y -CONFIG_USB_RTL8150=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_AX8817X=y -CONFIG_USB_NET_CDCETHER=y -CONFIG_USB_NET_DM9601=y -CONFIG_USB_NET_SMSC95XX=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_NET1080=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_MCS7830=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_NET_CDC_SUBSET=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -# CONFIG_ATM_TCP is not set +# CONFIG_ATM_DRIVERS is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y @@ -1299,7 +1201,7 @@ CONFIG_SPI_OMAP24XX=y # # CONFIG_SPI_TSC210X is not set # CONFIG_SPI_TSC2301 is not set -# CONFIG_SPI_SPIDEV is not set +CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -1413,9 +1315,7 @@ CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB=y -# CONFIG_SSB_SILENT is not set -# CONFIG_SSB_DEBUG is not set +# CONFIG_SSB is not set # # Multifunction device drivers @@ -1459,21 +1359,17 @@ CONFIG_MEDIA_TUNER=m # CONFIG_MEDIA_TUNER_CUSTOMIZE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_IR=m @@ -1497,7 +1393,8 @@ CONFIG_VIDEO_VIVI=m # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_VIDEO_AU0828 is not set -# CONFIG_VIDEO_OMAP3 is not set +CONFIG_VIDEO_OMAP3=m +CONFIG_VIDEO_OMAP34XX_ISP_RESIZER=m # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m @@ -1559,149 +1456,12 @@ CONFIG_RADIO_ADAPTERS=y # CONFIG_USB_MR800 is not set # CONFIG_RADIO_TEA5764 is not set CONFIG_DVB_DYNAMIC_MINORS=y -CONFIG_DVB_CAPTURE_DRIVERS=y -# CONFIG_TTPCI_EEPROM is not set - -# -# Supported USB Adapters -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_SIANO_SMS1XXX=m -CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y - -# -# Supported FlexCopII (B2C2) Adapters -# -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_SI21XX=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRX397XD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m +# CONFIG_DVB_CAPTURE_DRIVERS is not set CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m CONFIG_DVB_TDA10048=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3304=m CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_LNBP21=m -# CONFIG_DVB_ISL6405 is not set -CONFIG_DVB_ISL6421=m -CONFIG_DVB_LGS8GL5=m - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -CONFIG_DVB_AF9013=m # CONFIG_DAB is not set # @@ -1823,7 +1583,7 @@ CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y CONFIG_SND_OMAP_SOC_MCBSP=y -CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y +CONFIG_SND_OMAP_SOC_OMAP3_TOUCHBOOK=y CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_TWL4030=y @@ -1844,28 +1604,26 @@ CONFIG_USB_HID=y # Special HID drivers # CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_GREENASIA_FF=y -CONFIG_HID_TOPSEED=y +# CONFIG_HID_A4TECH is not set +CONFIG_HID_AI=y +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1902,7 +1660,6 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OXU210HP_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_U132_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set @@ -2028,32 +1785,25 @@ CONFIG_USB_EMI26=m # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_BERRY_CHARGE=m -CONFIG_USB_LED=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGET=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETMOTORCONTROL=m -CONFIG_USB_PHIDGETSERVO=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set -CONFIG_USB_VST=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m +# CONFIG_USB_VST is not set +# CONFIG_USB_ATM is not set CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -2217,12 +1967,12 @@ CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_MEILHAUS is not set # CONFIG_USB_IP_COMMON is not set -CONFIG_W35UND=m -CONFIG_PRISM2_USB=m +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set -CONFIG_USB_ATMEL=m +# CONFIG_USB_ATMEL is not set # CONFIG_AGNX is not set -CONFIG_OTUS=m +# CONFIG_OTUS is not set # CONFIG_COMEDI is not set # CONFIG_ASUS_OLED is not set # CONFIG_INPUT_MIMIO is not set @@ -2285,17 +2035,9 @@ CONFIG_XFS_FS=m # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=m -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_FS_POSIX_ACL is not set -CONFIG_BTRFS_FS=m -# CONFIG_BTRFS_FS_POSIX_ACL is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -2343,16 +2085,14 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -2376,20 +2116,18 @@ CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set -CONFIG_CRAMFS=m +# CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_ROMFS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set CONFIG_AUFS_FS=y CONFIG_AUFS_BRANCH_MAX_127=y # CONFIG_AUFS_BRANCH_MAX_511 is not set @@ -2422,8 +2160,7 @@ CONFIG_SUNRPC_GSS=y # CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y @@ -2433,19 +2170,9 @@ CONFIG_CIFS_STATS2=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_EXPERIMENTAL=y # CONFIG_CIFS_DFS_UPCALL is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_9P_FS=m +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types @@ -2455,14 +2182,13 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y +# CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y +# CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set @@ -2509,8 +2235,7 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -2533,6 +2258,7 @@ CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -2570,6 +2296,7 @@ CONFIG_TRACING=y # # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/dss2-fix-rotation-offsets.patch b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/dss2-fix-rotation-offsets.patch new file mode 100644 index 0000000000..959110bc1d --- /dev/null +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/dss2-fix-rotation-offsets.patch @@ -0,0 +1,54 @@ +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -661,13 +661,15 @@ + u32 data_start_p; + void __iomem *data_start_v; + struct omap_overlay_info info; +- int xres, yres; ++ int xres, yres, xoff, yoff; + int screen_width; + int mirror; + + DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id, + posx, posy, outw, outh); + ++ xoff = var->xoffset; ++ yoff = var->yoffset; + if (ofbi->rotation == FB_ROTATE_CW || ofbi->rotation == FB_ROTATE_CCW) { + xres = var->yres; + yres = var->xres; +@@ -676,8 +678,32 @@ + yres = var->yres; + } + +- offset = ((var->yoffset * var->xres_virtual + +- var->xoffset) * var->bits_per_pixel) >> 3; ++ if (ofbi->rotation == FB_ROTATE_CW || ofbi->rotation == FB_ROTATE_UD) { ++ if (var->yres < var->yres_virtual) { ++ if (var->yoffset) ++ yoff = 0; ++ else ++ yoff = var->yres_virtual - var->yres; ++ } ++ } ++ ++ if (ofbi->rotation == FB_ROTATE_CCW || ofbi->rotation == FB_ROTATE_UD) { ++ if (var->xres < var->xres_virtual) { ++ if (var->xoffset) ++ xoff = 0; ++ else ++ xoff = var->xres_virtual - var->xres; ++ } ++ } ++ ++ if (ofbi->rotation == FB_ROTATE_CW || ofbi->rotation == FB_ROTATE_CCW) { ++ offset = ((xoff * fix->line_length) >> 1) + ++ ((yoff * var->bits_per_pixel) >> 2); ++ } else ++ { ++ offset = yoff * fix->line_length + ++ ((xoff * var->bits_per_pixel) >> 3); ++ } + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + data_start_p = omapfb_get_region_rot_paddr(ofbi); diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/keyboard-special-keys.patch b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/keyboard-special-keys.patch new file mode 100644 index 0000000000..030de12261 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/keyboard-special-keys.patch @@ -0,0 +1,244 @@ +--- a/drivers/hid/Kconfig ++++ b/drivers/hid/Kconfig +@@ -89,6 +89,13 @@ config HID_A4TECH + ---help--- + Support for A4 tech X5 and WOP-35 / Trust 450L mice. + ++config HID_AI ++ tristate "Always Innovating" if EMBEDDED ++ depends on USB_HID ++ default !EMBEDDED ++ ---help--- ++ Support for Always Innovating Touch Book. ++ + config HID_APPLE + tristate "Apple" if EMBEDDED + depends on (USB_HID || BT_HIDP) +diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile +index fbd021f..88c0ead 100644 +--- a/drivers/hid/Makefile ++++ b/drivers/hid/Makefile +@@ -21,6 +21,7 @@ ifdef CONFIG_LOGIRUMBLEPAD2_FF + endif + + obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o ++obj-$(CONFIG_HID_AI) += hid-ai.o + obj-$(CONFIG_HID_APPLE) += hid-apple.o + obj-$(CONFIG_HID_BELKIN) += hid-belkin.o + obj-$(CONFIG_HID_CHERRY) += hid-cherry.o +diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c +index 1cc9674..84b580e 100644 +--- a/drivers/hid/hid-core.c ++++ b/drivers/hid/hid-core.c +@@ -1222,6 +1222,7 @@ EXPORT_SYMBOL_GPL(hid_connect); + static const struct hid_device_id hid_blacklist[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, + { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, ++ { HID_USB_DEVICE(USB_VENDOR_ID_AI, USB_DEVICE_ID_AI_TOUCH_BOOK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) }, +diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h +index 8851197..3d6fe8e 100644 +--- a/drivers/hid/hid-ids.h ++++ b/drivers/hid/hid-ids.h +@@ -54,6 +54,9 @@ + #define USB_VENDOR_ID_ALPS 0x0433 + #define USB_DEVICE_ID_IBM_GAMEPAD 0x1101 + ++#define USB_VENDOR_ID_AI 0xa110 ++#define USB_DEVICE_ID_AI_TOUCH_BOOK 0x0002 ++ + #define USB_VENDOR_ID_APPLE 0x05ac + #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304 + #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e +--- a/drivers/hid/hid-ai.c 2009-07-15 08:30:35.000000000 -0700 ++++ b/drivers/hid/hid-ai.c 2009-09-04 21:58:06.000000000 -0700 +@@ -0,0 +1,187 @@ ++/* ++ * USB HID quirks support for the Always Innovating Touch Book ++ * Code borrowed from hid-apple.c ++ * ++ * Copyright (c) 2009 Tim Yamin <plasm@roo.me.uk> ++ */ ++ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the Free ++ * Software Foundation; either version 2 of the License, or (at your option) ++ * any later version. ++ */ ++ ++#include <linux/device.h> ++#include <linux/hid.h> ++#include <linux/module.h> ++#include <linux/usb.h> ++ ++#include "hid-ids.h" ++ ++struct ai_sc { ++ unsigned long quirks; ++ unsigned int fn_on; ++ DECLARE_BITMAP(pressed_fn, KEY_CNT); ++}; ++ ++struct ai_key_translation { ++ u16 from; ++ u16 to; ++ u8 flags; ++}; ++ ++static struct ai_key_translation ai_fn_keys[] = { ++ { KEY_F6, KEY_BRIGHTNESSDOWN }, ++ { KEY_F7, KEY_BRIGHTNESSUP }, ++ ++ { KEY_F8, KEY_MUTE }, ++ { KEY_F9, KEY_VOLUMEDOWN }, ++ { KEY_F10, KEY_VOLUMEUP }, ++ ++ { KEY_UP, KEY_PAGEUP }, ++ { KEY_DOWN, KEY_PAGEDOWN }, ++ { } ++}; ++ ++static struct ai_key_translation *ai_find_translation( ++ struct ai_key_translation *table, u16 from) ++{ ++ struct ai_key_translation *trans; ++ ++ /* Look for the translation */ ++ for (trans = table; trans->from; trans++) ++ if (trans->from == from) ++ return trans; ++ ++ return NULL; ++} ++ ++static int ai_event(struct hid_device *hid, struct hid_field *field, ++ struct hid_usage *usage, __s32 value) ++{ ++ int do_translate; ++ ++ struct input_dev *input = field->hidinput->input; ++ struct ai_sc *asc = hid_get_drvdata(hid); ++ struct ai_key_translation *trans; ++ ++ if (usage->code == KEY_POWER) { ++ asc->fn_on = !!value; ++ input_event(input, usage->type, usage->code, value); ++ return 1; ++ } ++ ++ trans = ai_find_translation(ai_fn_keys, usage->code); ++ if (trans) { ++ if (test_bit(usage->code, asc->pressed_fn)) ++ do_translate = 1; ++ else ++ do_translate = asc->fn_on; ++ ++ if (do_translate) { ++ if (value) ++ set_bit(usage->code, asc->pressed_fn); ++ else ++ clear_bit(usage->code, asc->pressed_fn); ++ ++ input_event(input, usage->type, trans->to, ++ value); ++ ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++ ++static int ai_input_mapping(struct hid_device *hdev, struct hid_input *hi, ++ struct hid_field *field, struct hid_usage *usage, ++ unsigned long **bit, int *max) ++{ ++ struct ai_key_translation *trans; ++ ++ /* Enable all other keys */ ++ for (trans = ai_fn_keys; trans->from; trans++) ++ set_bit(trans->to, hi->input->keybit); ++ ++ return 0; ++} ++ ++static int ai_probe(struct hid_device *hdev, ++ const struct hid_device_id *id) ++{ ++ unsigned long quirks = id->driver_data; ++ struct ai_sc *asc; ++ unsigned int connect_mask = HID_CONNECT_DEFAULT; ++ int ret; ++ ++ asc = kzalloc(sizeof(*asc), GFP_KERNEL); ++ if (asc == NULL) { ++ dev_err(&hdev->dev, "can't alloc ai descriptor\n"); ++ return -ENOMEM; ++ } ++ ++ asc->quirks = quirks; ++ hid_set_drvdata(hdev, asc); ++ ++ ret = hid_parse(hdev); ++ if (ret) { ++ dev_err(&hdev->dev, "parse failed\n"); ++ goto err_free; ++ } ++ ++ ret = hid_hw_start(hdev, connect_mask); ++ if (ret) { ++ dev_err(&hdev->dev, "hw start failed\n"); ++ goto err_free; ++ } ++ ++ return 0; ++err_free: ++ kfree(asc); ++ return ret; ++} ++ ++static void ai_remove(struct hid_device *hdev) ++{ ++ hid_hw_stop(hdev); ++ kfree(hid_get_drvdata(hdev)); ++} ++ ++static const struct hid_device_id ai_devices[] = { ++ { HID_USB_DEVICE(USB_VENDOR_ID_AI, USB_DEVICE_ID_AI_TOUCH_BOOK) }, ++ { } ++}; ++ ++MODULE_DEVICE_TABLE(hid, ai_devices); ++ ++static struct hid_driver ai_driver = { ++ .name = "ai", ++ .id_table = ai_devices, ++ .probe = ai_probe, ++ .remove = ai_remove, ++ .event = ai_event, ++ .input_mapping = ai_input_mapping, ++}; ++ ++static int ai_init(void) ++{ ++ int ret; ++ ++ ret = hid_register_driver(&ai_driver); ++ if (ret) ++ printk(KERN_ERR "can't register ai driver\n"); ++ ++ return ret; ++} ++ ++static void ai_exit(void) ++{ ++ hid_unregister_driver(&ai_driver); ++} ++ ++module_init(ai_init); ++module_exit(ai_exit); ++MODULE_LICENSE("GPL"); ++HID_COMPAT_LOAD_DRIVER(ai); diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/touchbook-config.patch b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/touchbook-config.patch new file mode 100644 index 0000000000..1482bf666d --- /dev/null +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/touchbook-config.patch @@ -0,0 +1,60 @@ +--- a/arch/arm/mach-omap2/Kconfig 2009-10-13 15:19:17.000000000 -0700 ++++ b/arch/arm/mach-omap2/Kconfig 2009-10-13 15:19:51.000000000 -0700 +@@ -137,3 +137,9 @@ + config MACH_OMAP3_PANDORA + bool "OMAP3 Pandora" + depends on ARCH_OMAP3 && ARCH_OMAP34XX ++ ++config MACH_OMAP3_TOUCHBOOK ++ bool "OMAP3 Touch Book" ++ depends on ARCH_OMAP3 && ARCH_OMAP34XX ++ select BACKLIGHT_CLASS_DEVICE ++ +--- a/arch/arm/mach-omap2/Makefile 2009-10-13 15:22:26.000000000 -0700 ++++ b/arch/arm/mach-omap2/Makefile 2009-10-13 15:21:10.000000000 -0700 +@@ -87,6 +87,9 @@ + twl4030-generic-scripts.o + obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ + mmc-twl4030.o ++obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ ++ mmc-twl4030.o \ ++ twl4030-generic-scripts.o + + # Platform specific device init code + obj-$(CONFIG_USB_MUSB_SOC) += usb-musb.o +--- a/sound/soc/omap/Makefile 2009-10-15 21:07:27.000000000 +0200 ++++ b/sound/soc/omap/Makefile 2009-10-15 21:09:18.000000000 +0200 +@@ -13,6 +13,7 @@ + snd-soc-sdp3430-objs := sdp3430.o + snd-soc-omap3pandora-objs := omap3pandora.o + snd-soc-omap3beagle-objs := omap3beagle.o ++snd-soc-omap3touchbook-objs := omap3beagle.o + + obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o + obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o +@@ -21,3 +22,4 @@ + obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o + obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o + obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o ++obj-$(CONFIG_SND_OMAP_SOC_OMAP3_TOUCHBOOK) += snd-soc-omap3beagle.o +--- a/sound/soc/omap/Kconfig 2009-10-15 21:07:35.000000000 +0200 ++++ b/sound/soc/omap/Kconfig 2009-10-15 21:08:24.000000000 +0200 +@@ -64,4 +64,11 @@ + help + Say Y if you want to add support for SoC audio on the Beagleboard. + ++config SND_OMAP_SOC_OMAP3_TOUCHBOOK ++ tristate "SoC Audio support for OMAP3 Touch Book" ++ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_TOUCHBOOK ++ select SND_OMAP_SOC_MCBSP ++ select SND_SOC_TWL4030 ++ help ++ Say Y if you want to add support for SoC audio on the Touch Book. + +--- a/arch/arm/tools/mach-types 2009-10-16 08:22:36.000000000 +0800 ++++ b/arch/arm/tools/mach-types 2009-10-16 08:23:13.000000000 +0800 +@@ -2124,3 +2124,4 @@ + fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134 + rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 + smallogger MACH_SMALLOGGER SMALLOGGER 2136 ++omap3_touchbook MACH_OMAP3_TOUCHBOOK OMAP3_TOUCHBOOK 2393 |