diff options
Diffstat (limited to 'packages')
| -rw-r--r-- | packages/udev/udev-100/.mtn2git_empty | 0 | ||||
| -rw-r--r-- | packages/udev/udev-100/flags.patch | 51 | ||||
| -rw-r--r-- | packages/udev/udev-100/init | 242 | ||||
| -rw-r--r-- | packages/udev/udev-100/links.conf | 20 | ||||
| -rw-r--r-- | packages/udev/udev-100/local.rules | 31 | ||||
| -rw-r--r-- | packages/udev/udev-100/permissions.rules | 109 | ||||
| -rw-r--r-- | packages/udev/udev-100/udev.rules | 98 | ||||
| -rw-r--r-- | packages/udev/udev_100.bb | 63 |
8 files changed, 614 insertions, 0 deletions
diff --git a/packages/udev/udev-100/.mtn2git_empty b/packages/udev/udev-100/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/udev/udev-100/.mtn2git_empty diff --git a/packages/udev/udev-100/flags.patch b/packages/udev/udev-100/flags.patch new file mode 100644 index 0000000000..492a39881c --- /dev/null +++ b/packages/udev/udev-100/flags.patch @@ -0,0 +1,51 @@ +--- udev-089/Makefile.orig 2006-04-08 13:32:53.000000000 +0200 ++++ udev-089/Makefile 2006-04-08 13:34:27.000000000 +0200 +@@ -117,28 +117,28 @@ + AR = $(CROSS_COMPILE)ar + RANLIB = $(CROSS_COMPILE)ranlib + +-CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 ++override CFLAGS = -g -Wall -pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 + WARNINGS = -Wstrict-prototypes -Wsign-compare -Wshadow \ + -Wchar-subscripts -Wmissing-declarations -Wnested-externs \ + -Wpointer-arith -Wcast-align -Wsign-compare -Wmissing-prototypes +-CFLAGS += $(WARNINGS) ++override CFLAGS += $(WARNINGS) + + LDFLAGS = -Wl,-warn-common + + OPTFLAGS = -Os +-CFLAGS += $(OPTFLAGS) ++override CFLAGS += $(OPTFLAGS) + + ifeq ($(strip $(USE_LOG)),true) +- CFLAGS += -DUSE_LOG ++ override CFLAGS += -DUSE_LOG + endif + + # if DEBUG is enabled, then we do not strip + ifeq ($(strip $(DEBUG)),true) +- CFLAGS += -DDEBUG ++ override CFLAGS += -DDEBUG + endif + + ifeq ($(strip $(USE_GCOV)),true) +- CFLAGS += -fprofile-arcs -ftest-coverage ++ override CFLAGS += -fprofile-arcs -ftest-coverage + LDFLAGS += -fprofile-arcs + endif + +@@ -151,11 +151,11 @@ + ifeq ($(strip $(USE_SELINUX)),true) + UDEV_OBJS += udev_selinux.o + LIB_OBJS += -lselinux -lsepol +- CFLAGS += -DUSE_SELINUX ++ override CFLAGS += -DUSE_SELINUX + endif + + ifeq ($(strip $(USE_STATIC)),true) +- CFLAGS += -DUSE_STATIC ++ override CFLAGS += -DUSE_STATIC + LDFLAGS += -static + endif + diff --git a/packages/udev/udev-100/init b/packages/udev/udev-100/init new file mode 100644 index 0000000000..cc25c026a3 --- /dev/null +++ b/packages/udev/udev-100/init @@ -0,0 +1,242 @@ +#!/bin/sh -e +### BEGIN INIT INFO +# Provides: udev +# Required-Start: mountvirtfs +# Required-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Start udevd, populate /dev and load drivers. +### END INIT INFO + +# we need to unmount /dev/pts/ and remount it later over the tmpfs +unmount_devpts() { + if mountpoint -q /dev/pts/; then + umount -l /dev/pts/ + fi + + if mountpoint -q /dev/shm/; then + umount -l /dev/shm/ + fi +} + +# mount a tmpfs over /dev, if somebody did not already do it +mount_tmpfs() { + if grep -E -q "^[^[:space:]]+ /dev tmpfs" /proc/mounts; then + return + fi + + # /dev/.static/dev/ is used by MAKEDEV to access the real /dev/ directory. + # /etc/udev/ is recycled as a temporary mount point because it's the only + # directory which is guaranteed to be available. + mount -n -o bind /dev /etc/udev + + if ! mount -n -o size=$tmpfs_size,mode=0755 -t tmpfs tmpfs /dev; then + umount /etc/udev + echo "udev requires tmpfs support, not started." + exit 1 + fi + + mkdir -p /dev/.static/dev + chmod 700 /dev/.static/ + # The mount options in busybox are non-standard... + if test -x /bin/mount.util-linux + then + /bin/mount.util-linux --move /etc/udev /dev/.static/dev + elif test -x /bin/busybox + then + busybox mount -n -o move /etc/udev /dev/.static/dev + else + echo "udev requires an identifiable mount command, not started." + umount /etc/udev + umount /dev + exit 1 + fi +} + +create_dev_makedev() { + if [ -e /sbin/MAKEDEV ]; then + [ ! -e /dev/MAKEDEV ] || ln -s /sbin/MAKEDEV /dev/MAKEDEV + else + ln -s /bin/true /dev/MAKEDEV + fi +} + +# I hate this hack. -- Md +make_extra_nodes() { + if [ "$(echo /lib/udev/devices/*)" != "/lib/udev/devices/*" ]; then + cp -a /lib/udev/devices/* /dev/ + fi + + [ -e /etc/udev/links.conf ] || return 0 + grep '^[^#]' /etc/udev/links.conf | \ + while read type name arg1; do + [ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] ||continue + case "$type" in + L) ln -s $arg1 /dev/$name ;; + D) mkdir -p /dev/$name ;; + M) mknod -m 600 /dev/$name $arg1 ;; + *) echo "links.conf: unparseable line ($type $name $arg1)" ;; + esac + done +} + +supported_kernel() { + case "$(uname -r)" in + 2.[012345].*|2.6.[0-9]|2.6.[0-9][!0-9]*) return 1 ;; + 2.6.1[0-4]|2.6.1[0-4][!0-9]*) return 1 ;; + esac + return 0 +} + +load_input_modules() { + case "$(uname -r)" in + 2.6.1[0-5]|2.6.1[0-5][!0-9]*) ;; # <= 2.6.15 + *) return 0 + esac + + for module in mousedev evdev joydev; do + modprobe -q $module || true + done +} + +# shell version of /usr/bin/tty +my_tty() { + [ -x /bin/readlink ] || return 0 + [ -e /proc/self/fd/0 ] || return 0 + readlink --silent /proc/self/fd/0 || true +} + +warn_if_interactive() { + if [ "$RUNLEVEL" = "S" -a "$PREVLEVEL" = "N" ]; then + return + fi + + TTY=$(my_tty) + if [ -z "$TTY" -o "$TTY" = "/dev/console" ]; then + return + fi + + printf "\n\n\nIt has been detected that the command\n\n\t$0 $*\n\n" + printf "has been run from an interactive shell.\n" + printf "It will probably not do what you expect, so this script will wait\n" + printf "60 seconds before continuing. Press ^C to stop it.\n" + printf "RUNNING THIS COMMAND IS HIGHLY DISCOURAGED!\n\n\n\n" + sleep 60 +} + +############################################################################## + +[ -x /sbin/udevd ] || exit 0 + +PATH="/sbin:/bin:/usr/bin" + +# defaults +tmpfs_size="10M" +udev_root="/dev" + +if [ -e /etc/udev/udev.conf ]; then + . /etc/udev/udev.conf +fi + +if ! supported_kernel; then + echo "udev requires a kernel >= 2.6.15, not started." + exit 1 +fi + +if [ ! -e /proc/filesystems ]; then + echo "udev requires a mounted procfs, not started." + exit 1 +fi + +if ! grep -q '[[:space:]]tmpfs$' /proc/filesystems; then + echo "udev requires tmpfs support, not started." + exit 1 +fi + +if [ ! -d /sys/class/ ]; then + echo "udev requires a mounted sysfs, not started." + exit 1 +fi + +if [ ! -e /proc/sys/kernel/hotplug ]; then + echo "udev requires hotplug support, not started." + exit 1 +fi + +############################################################################## + +# When modifying this script, do not forget that between the time that +# the new /dev has been mounted and udevsynthesize has been run there will be +# no /dev/null. This also means that you cannot use the "&" shell command. + +udev_root=${udev_root%/} + +case "$1" in + start) + if [ -e "$udev_root/.udev/" ]; then + if mountpoint -q $udev_root/; then + TMPFS_MOUNTED=1 + else + echo ".udev/ already exists on the static $udev_root!" + fi + else + warn_if_interactive + fi + + echo > /proc/sys/kernel/hotplug + + if [ -z "$TMPFS_MOUNTED" ]; then + unmount_devpts + mount_tmpfs + [ -d /proc/1 ] || mount -n /proc + fi + + # /dev/null must be created before udevd is started + make_extra_nodes + + echo "Starting the hotplug events dispatcher" "udevd" + udevd --daemon + + # if this directory is not present /dev will not be updated by udev + mkdir -p /dev/.udev/db/ /dev/.udev/queue/ + + echo "Synthesizing the initial hotplug events" + udevtrigger + + load_input_modules + create_dev_makedev + + # wait for the udevd childs to finish + echo "Waiting for /dev to be fully populated" + if ! udevsettle; then + echo 'timeout' + fi + ;; + + stop) + echo "Stopping the hotplug events dispatcher" "udevd" + start-stop-daemon --stop --name udevd --quiet + ;; + + restart) + echo "Stopping the hotplug events dispatcher" "udevd" + if start-stop-daemon --stop --name udevd --quiet ; then + exit 1 + fi + + echo "Starting the hotplug events dispatcher" "udevd" + udevd --daemon + ;; + + reload) + udevcontrol reload_rules + ;; + + *) + echo "Usage: /etc/init.d/udev {start|stop|restart|reload}" + exit 1 + ;; +esac + +exit 0 + diff --git a/packages/udev/udev-100/links.conf b/packages/udev/udev-100/links.conf new file mode 100644 index 0000000000..ee26012039 --- /dev/null +++ b/packages/udev/udev-100/links.conf @@ -0,0 +1,20 @@ +# This file does not exist. Please do not ask the debian maintainer about it. +# You may use it to do strange and wonderful things, at your risk. + +L fd /proc/self/fd +L stdin /proc/self/fd/0 +L stdout /proc/self/fd/1 +L stderr /proc/self/fd/2 +L core /proc/kcore +L sndstat /proc/asound/oss/sndstat + +D pts +D shm + +# Hic sunt leones. +M ppp c 108 0 +D loop +M loop/0 b 7 0 +D net +M net/tun c 10 200 + diff --git a/packages/udev/udev-100/local.rules b/packages/udev/udev-100/local.rules new file mode 100644 index 0000000000..2308b52c4a --- /dev/null +++ b/packages/udev/udev-100/local.rules @@ -0,0 +1,31 @@ +# There are a number of modifiers that are allowed to be used in some +# of the different fields. They provide the following subsitutions: +# +# %n the "kernel number" of the device. +# For example, 'sda3' has a "kernel number" of '3' +# %e the smallest number for that name which does not matches an existing node +# %k the kernel name for the device +# %M the kernel major number for the device +# %m the kernel minor number for the device +# %b the bus id for the device +# %c the string returned by the PROGRAM +# %s{filename} the content of a sysfs attribute +# %% the '%' char itself +# + +# Media automounting +SUBSYSTEM=="block", ACTION=="add" RUN+="/etc/udev/scripts/mount.sh" +SUBSYSTEM=="block", ACTION=="remove" RUN+="/etc/udev/scripts/mount.sh" + +# Handle network interface setup +SUBSYSTEM=="net", ACTION=="add" RUN+="/etc/udev/scripts/network.sh" +SUBSYSTEM=="net", ACTION=="remove" RUN+="/etc/udev/scripts/network.sh" + +# The first rtc device is symlinked to /dev/rtc +KERNEL=="rtc0", SYMLINK+="rtc" + +# Try and modprobe for drivers for new hardware +ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" + +# Create a symlink to any touchscreen input device +SUBSYSTEM=="input", KERNEL=="event[0-9]*", SYSFS{modalias}=="input:*-e0,1*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0" diff --git a/packages/udev/udev-100/permissions.rules b/packages/udev/udev-100/permissions.rules new file mode 100644 index 0000000000..8da35c3090 --- /dev/null +++ b/packages/udev/udev-100/permissions.rules @@ -0,0 +1,109 @@ +ACTION!="add", GOTO="permissions_end" + +# workarounds needed to synchronize with sysfs +DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus" +SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt" +# only needed for kernels < 2.6.16 +SUBSYSTEM=="net", WAIT_FOR_SYSFS="address" +# only needed for kernels < 2.6.17 +SUBSYSTEM=="net", ENV{PHYSDEVDRIVER}=="?*", WAIT_FOR_SYSFS="device/driver" + +# default permissions for block devices +SUBSYSTEM=="block", GROUP="disk" +SUBSYSTEM=="block", SYSFS{removable}=="1", GROUP="floppy" + +# IDE devices +BUS=="ide", KERNEL=="hd[a-z]|pcd[0-9]*", DRIVER=="ide-cdrom|pcd", \ + IMPORT{program}="cdrom_id --export $tempnode" +ENV{ID_CDROM}=="?*", GROUP="cdrom" +BUS=="ide", KERNEL=="ht[0-9]*", GROUP="tape" +BUS=="ide", KERNEL=="nht[0-9]*", GROUP="tape" + +# SCSI devices +BUS=="scsi", SYSFS{type}=="1", GROUP="tape" +BUS=="scsi", SYSFS{type}=="3", SYSFS{vendor}=="HP", GROUP="scanner" +BUS=="scsi", SYSFS{type}=="5", GROUP="cdrom" +BUS=="scsi", SYSFS{type}=="6", GROUP="scanner" + +# USB devices +BUS=="usb", KERNEL=="legousbtower*", MODE="0666" +BUS=="usb", KERNEL=="lp[0-9]*", GROUP="lp" + +# usbfs-like devices +SUBSYSTEM=="usb_device", MODE="0664" + +# iRiver music players +SUBSYSTEM=="usb_device", GROUP="plugdev", \ + SYSFS{idVendor}=="4102", SYSFS{idProduct}=="10[01][135789]" + +# serial devices +SUBSYSTEM=="tty", GROUP="dialout" +SUBSYSTEM=="capi", GROUP="dialout" +SUBSYSTEM=="slamr", GROUP="dialout" +SUBSYSTEM=="zaptel", GROUP="dialout" + +# vc devices (all members of the tty subsystem) +KERNEL=="ptmx", MODE="0666", GROUP="root" +KERNEL=="console", MODE="0600", GROUP="root" +KERNEL=="tty", MODE="0666", GROUP="root" +KERNEL=="tty[0-9]*", GROUP="root" +KERNEL=="pty*", MODE="0666", GROUP="tty" + +# video devices +SUBSYSTEM=="video4linux", GROUP="video" +SUBSYSTEM=="drm", GROUP="video" +SUBSYSTEM=="dvb", GROUP="video" +SUBSYSTEM=="em8300", GROUP="video" +SUBSYSTEM=="graphics", GROUP="video" +SUBSYSTEM=="nvidia", GROUP="video" + +# misc devices +KERNEL=="random", MODE="0666" +KERNEL=="urandom", MODE="0666" +KERNEL=="mem", MODE="0640", GROUP="kmem" +KERNEL=="kmem", MODE="0640", GROUP="kmem" +KERNEL=="port", MODE="0640", GROUP="kmem" +KERNEL=="full", MODE="0666" +KERNEL=="null", MODE="0666" +KERNEL=="zero", MODE="0666" +KERNEL=="inotify", MODE="0666" +KERNEL=="sgi_fetchop", MODE="0666" +KERNEL=="sonypi", MODE="0666" +KERNEL=="agpgart", GROUP="video" +KERNEL=="nvram", GROUP="nvram" +KERNEL=="rtc", GROUP="audio" +KERNEL=="tpm*", MODE="0600", OWNER="tss", GROUP="tss" +KERNEL=="fuse", GROUP="fuse" + +KERNEL=="cdemu[0-9]*", GROUP="cdrom" +KERNEL=="pktcdvd[0-9]*", GROUP="cdrom" +KERNEL=="pktcdvd", MODE="0644" + +KERNEL=="uverbs*", GROUP="rdma" +KERNEL=="ucm*", GROUP="rdma" + +# printers and parallel devices +SUBSYSTEM=="printer", GROUP="lp" +SUBSYSTEM=="ppdev", GROUP="lp" +KERNEL=="pt[0-9]*", GROUP="tape" +KERNEL=="pht[0-9]*", GROUP="tape" + +# sound devices +SUBSYSTEM=="sound", GROUP="audio" + +# ieee1394 devices +KERNEL=="raw1394", GROUP="disk" +KERNEL=="dv1394*", GROUP="video" +KERNEL=="video1394*", GROUP="video" + +# input devices +KERNEL=="event[0-9]*", SYSFS{name}=="*dvb*|*DVB*|* IR *" \ + MODE="0664", GROUP="video" +KERNEL=="js[0-9]*", MODE="0664" + +# AOE character devices +SUBSYSTEM=="aoe", MODE="0220", GROUP="disk" +SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440" + +LABEL="permissions_end" + diff --git a/packages/udev/udev-100/udev.rules b/packages/udev/udev-100/udev.rules new file mode 100644 index 0000000000..9c4ea4214d --- /dev/null +++ b/packages/udev/udev-100/udev.rules @@ -0,0 +1,98 @@ +# There are a number of modifiers that are allowed to be used in some +# of the different fields. They provide the following subsitutions: +# +# %n the "kernel number" of the device. +# For example, 'sda3' has a "kernel number" of '3' +# %e the smallest number for that name which does not matches an existing node +# %k the kernel name for the device +# %M the kernel major number for the device +# %m the kernel minor number for the device +# %b the bus id for the device +# %c the string returned by the PROGRAM +# %s{filename} the content of a sysfs attribute +# %% the '%' char itself +# + +# SCSI devices +BUS=="scsi", KERNEL=="sr[0-9]*", NAME="scd%n", SYMLINK+="sr%n" + +# USB devices +BUS=="usb", KERNEL=="auer[0-9]*", NAME="usb/%k" +BUS=="usb", KERNEL=="cpad[0-9]*", NAME="usb/%k" +BUS=="usb", KERNEL=="dabusb*", NAME="usb/%k" +BUS=="usb", KERNEL=="hiddev*", NAME="usb/%k" +BUS=="usb", KERNEL=="legousbtower*", NAME="usb/%k" +BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k" +BUS=="usb", KERNEL=="ttyUSB*", SYSFS{product}=="Palm Handheld*", \ + SYMLINK+="pilot" + +# usbfs-like devices +SUBSYSTEM=="usb_device", \ + PROGRAM="/bin/sh -c 'export X=%k; export X=$${X#usbdev}; export B=$${X%%%%.*}; export D=$${X#*.}; echo bus/usb/$$B/$$D'", SYMLINK+="%c" + +# serial devices +KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20" +KERNEL=="capi[0-9]*", NAME="capi/%n" + +# video devices +KERNEL=="card[0-9]*", NAME="dri/%k" + +# misc devices +KERNEL=="hw_random", NAME="hwrng" +KERNEL=="tun", NAME="net/%k" + +KERNEL=="cdemu[0-9]*", NAME="cdemu/%n" +KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/%n" +KERNEL=="pktcdvd", NAME="pktcdvd/control" + +KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid" +KERNEL=="msr[0-9]*", NAME="cpu/%n/msr" +KERNEL=="microcode", NAME="cpu/microcode" + +KERNEL=="umad*", NAME="infiniband/%k" +KERNEL=="issm*", NAME="infiniband/%k" +KERNEL=="uverbs*", NAME="infiniband/%k" +KERNEL=="ucm", NAME="infiniband/%k" + +KERNEL=="buzzer", NAME="misc/buzzer" + +# ALSA devices +KERNEL=="controlC[0-9]*", NAME="snd/%k" +KERNEL=="hwC[D0-9]*", NAME="snd/%k" +KERNEL=="pcmC[D0-9cp]*", NAME="snd/%k" +KERNEL=="midiC[D0-9]*", NAME="snd/%k" +KERNEL=="timer", NAME="snd/%k" +KERNEL=="seq", NAME="snd/%k" + +# ieee1394 devices +KERNEL=="dv1394*", NAME="dv1394/%n" +KERNEL=="video1394*", NAME="video1394/%n" + +# input devices +KERNEL=="mice", NAME="input/%k" +KERNEL=="mouse[0-9]*", NAME="input/%k" +KERNEL=="event[0-9]*", NAME="input/%k" +KERNEL=="js[0-9]*", NAME="input/%k" +KERNEL=="ts[0-9]*", NAME="input/%k" +KERNEL=="uinput", NAME="input/%k" + +# Zaptel +KERNEL=="zapctl", NAME="zap/ctl" +KERNEL=="zaptimer", NAME="zap/timer" +KERNEL=="zapchannel", NAME="zap/channel" +KERNEL=="zappseudo", NAME="zap/pseudo" +KERNEL=="zap[0-9]*", NAME="zap/%n" + +# AOE character devices +SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k" +SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k" +SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k" + +# device mapper creates its own device nodes, so ignore these +KERNEL=="dm-[0-9]*", OPTIONS+="ignore_device" +KERNEL=="device-mapper", NAME="mapper/control" + +KERNEL=="rfcomm[0-9]*", NAME="%k", GROUP="users", MODE="0660" + +# Firmware Helper +ACTION=="add", SUBSYSTEM=="firmware", RUN+="/lib/udev/firmware_helper" diff --git a/packages/udev/udev_100.bb b/packages/udev/udev_100.bb new file mode 100644 index 0000000000..2e9e8d500f --- /dev/null +++ b/packages/udev/udev_100.bb @@ -0,0 +1,63 @@ +DEFAULT_PREFERENCE = "-1" + +DESCRIPTION = "udev is a daemon which dynamically creates and removes device nodes from \ +/dev/, handles hotplug events and loads drivers at boot time. It replaces \ +the hotplug package and requires a kernel not older than 2.6.15." +DESCRIPTION_libvolume-id = "libvolume_id shared library, \ +used to detect the type of a file system and read its metadata." +DESCRIPTION_libvolume-id-dev = "libvolume_id development headers, \ +needed to link programs with libvolume_id." + +PR = "r0" + +SRC_URI = "http://kernel.org/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \ + file://noasmlinkage.patch;patch=1 \ + file://flags.patch;patch=1 \ + file://mount.blacklist \ + " + +require udev.inc + +SRC_URI_append_h2200 = " file://50-hostap_cs.rules " +PACKAGE_ARCH_h2200 = "h2200" + +INITSCRIPT_PARAMS = "start 03 S ." + +PACKAGES =+ "libvolume-id-dev libvolume-id" +PKG_libvolume-id-dev = "libvolume-id-dev" +FILES_libvolume-id-dev = "${includedir}/libvolume_id.h ${libdir}/libvolume_id.a ${libdir}/libvolume_id.so ${libdir}/pkgconfig/libvolume_id.pc" +FILES_libvolume-id = "${base_libdir}/libvolume_id.so.*" +FILES_${PN} += "${base_libdir}/udev/*" +FILES_${PN}-dbg += "${base_libdir}/udev/.debug" +UDEV_EXTRAS = "extras/firmware/ extras/scsi_id/ extras/volume_id/ extras/run_directory/" +EXTRA_OEMAKE += "libudevdir=/lib/udev libdir=${base_libdir} prefix=" + +do_install () { + install -d ${D}${usrsbindir} \ + ${D}${sbindir} + oe_runmake 'DESTDIR=${D}' INSTALL=install install + install -d ${D}${sysconfdir}/init.d + install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev + + install -d ${D}${sysconfdir}/udev/rules.d/ + + install -m 0644 ${WORKDIR}/mount.blacklist ${D}${sysconfdir}/udev/ + install -m 0644 ${WORKDIR}/local.rules ${D}${sysconfdir}/udev/rules.d/local.rules + install -m 0644 ${WORKDIR}/permissions.rules ${D}${sysconfdir}/udev/rules.d/permissions.rules + install -m 0644 ${WORKDIR}/udev.rules ${D}${sysconfdir}/udev/rules.d/udev.rules + install -m 0644 ${WORKDIR}/links.conf ${D}${sysconfdir}/udev/links.conf + if [ "${UDEV_DEVFS_RULES}" = "1" ]; then + install -m 0644 ${WORKDIR}/devfs-udev.rules ${D}${sysconfdir}/udev/rules.d/devfs-udev.rules + fi + + install -d ${D}${sysconfdir}/udev/scripts/ + + install -m 0755 ${WORKDIR}/mount.sh ${D}${sysconfdir}/udev/scripts/mount.sh + install -m 0755 ${WORKDIR}/network.sh ${D}${sysconfdir}/udev/scripts + + install -d ${D}${base_libdir}/udev/ +} + +do_install_append_h2200() { + install -m 0644 ${WORKDIR}/50-hostap_cs.rules ${D}${sysconfdir}/udev/rules.d/50-hostap_cs.rules +} |