diff options
Diffstat (limited to 'packages/u-boot')
| -rw-r--r-- | packages/u-boot/u-boot-git/akita/.mtn2git_empty | 0 | ||||
| -rw-r--r-- | packages/u-boot/u-boot-git/akita/akita-standard-partitioning.patch | 112 | ||||
| -rw-r--r-- | packages/u-boot/u-boot-git/c7x0/.mtn2git_empty | 0 | ||||
| -rw-r--r-- | packages/u-boot/u-boot-git/c7x0/corgi-standard-partitioning.patch | 112 | ||||
| -rw-r--r-- | packages/u-boot/u-boot-git/pdaXrom-u-boot.patch | 4934 | ||||
| -rw-r--r-- | packages/u-boot/u-boot-git/uboot-eabi-fix-HACK2.patch | 94 | ||||
| -rw-r--r-- | packages/u-boot/u-boot_git.bb | 12 |
7 files changed, 5263 insertions, 1 deletions
diff --git a/packages/u-boot/u-boot-git/akita/.mtn2git_empty b/packages/u-boot/u-boot-git/akita/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/u-boot/u-boot-git/akita/.mtn2git_empty diff --git a/packages/u-boot/u-boot-git/akita/akita-standard-partitioning.patch b/packages/u-boot/u-boot-git/akita/akita-standard-partitioning.patch new file mode 100644 index 0000000000..9d65de8daa --- /dev/null +++ b/packages/u-boot/u-boot-git/akita/akita-standard-partitioning.patch @@ -0,0 +1,112 @@ +--- git/include/configs/akita.h 2007-12-26 17:57:00.000000000 +0000 ++++ git/include/configs/akita.h 2007-12-26 18:07:47.000000000 +0000 +@@ -81,35 +81,35 @@ + "if testkey 101 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x00060000 0x00540000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home); " \ + "bootm; " \ + "fi; " \ + "if testkey 2 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait fbcon=rotate:1; " \ + "bootm; " \ + "fi; " \ + "if testkey 18 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait fbcon=rotate:1; " \ + "bootm; " \ + "fi; " \ + "if testkey 3 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait fbcon=rotate:1; " \ + "bootm; " \ + "fi; " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home); " \ + "bootm; " + #else + #define CONFIG_BOOTCOMMAND "" // "run boot_flash" + #endif + +-#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home)" + #define CONFIG_SETUP_MEMORY_TAGS 1 + #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ + #define CONFIG_INITRD_TAG 1 +@@ -302,9 +302,9 @@ + /* Note: fake mtd_id used, no linux mtd map file */ + + #define CONFIG_JFFS2_CMDLINE +-#define MTDIDS_DEFAULT "nand0=laze-0" ++#define MTDIDS_DEFAULT "nand0=sharpsl-nand" + //#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" +-#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++#define MTDPARTS_DEFAULT "mtdparts=sharpsl-nand-0:7168k(smf),59392k(root),-(home)" + + /* + * SHARP SL NAND logical partition +--- git/include/configs/akita.h 2007-12-26 17:57:00.000000000 +0000 ++++ git/include/configs/akita.h 2007-12-26 18:07:47.000000000 +0000 +@@ -81,35 +81,35 @@ + "if testkey 101 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x00060000 0x00540000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " \ + "bootm; " \ + "fi; " \ + "if testkey 2 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait fbcon=rotate:1; " \ + "bootm; " \ + "fi; " \ + "if testkey 18 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait fbcon=rotate:1; " \ + "bootm; " \ + "fi; " \ + "if testkey 3 ; " \ + "then " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait fbcon=rotate:1; " \ + "bootm; " \ + "fi; " \ + "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " \ + "bootm; " + #else + #define CONFIG_BOOTCOMMAND "" // "run boot_flash" + #endif + +-#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192 mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)" + #define CONFIG_SETUP_MEMORY_TAGS 1 + #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ + #define CONFIG_INITRD_TAG 1 +@@ -302,9 +302,9 @@ + /* Note: fake mtd_id used, no linux mtd map file */ + + #define CONFIG_JFFS2_CMDLINE +-#define MTDIDS_DEFAULT "nand0=laze-0" ++#define MTDIDS_DEFAULT "nand0=sharpsl-nand" + //#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" +-#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++#define MTDPARTS_DEFAULT "mtdparts=sharpsl-nand-0:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)" + + /* + * SHARP SL NAND logical partition diff --git a/packages/u-boot/u-boot-git/c7x0/.mtn2git_empty b/packages/u-boot/u-boot-git/c7x0/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/u-boot/u-boot-git/c7x0/.mtn2git_empty diff --git a/packages/u-boot/u-boot-git/c7x0/corgi-standard-partitioning.patch b/packages/u-boot/u-boot-git/c7x0/corgi-standard-partitioning.patch new file mode 100644 index 0000000000..205f05b53e --- /dev/null +++ b/packages/u-boot/u-boot-git/c7x0/corgi-standard-partitioning.patch @@ -0,0 +1,112 @@ +--- git/include/configs/corgi.h 2007-12-26 17:57:00.000000000 +0000 ++++ git/include/configs/corgi.h 2007-12-26 18:07:47.000000000 +0000 +@@ -81,35 +81,35 @@ + "if testkey 101 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x00060000 0x00540000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home); " \ + "bootm; " \ + "fi; " \ + "if testkey 2 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait; " \ + "bootm; " \ + "fi; " \ + "if testkey 18 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait; " \ + "bootm; " \ + "fi; " \ + "if testkey 3 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait; " \ + "bootm; " \ + "fi; " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home); " \ + "bootm; " + #else + #define CONFIG_BOOTCOMMAND "" // "run boot_flash" + #endif + +-#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home)" + #define CONFIG_SETUP_MEMORY_TAGS 1 + #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ + #define CONFIG_INITRD_TAG 1 +@@ -304,9 +304,9 @@ + /* Note: fake mtd_id used, no linux mtd map file */ + + #define CONFIG_JFFS2_CMDLINE +-#define MTDIDS_DEFAULT "nand0=laze-0" ++#define MTDIDS_DEFAULT "nand0=sharpsl-nand" + //#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" +-#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++#define MTDPARTS_DEFAULT "mtdparts=sharpsl-nand:7168k(smf),54272k(root),-(home)" + + /* + * SHARP SL NAND logical partition +--- git/include/configs/corgi.h 2007-12-26 17:57:00.000000000 +0000 ++++ git/include/configs/corgi.h 2007-12-26 18:07:47.000000000 +0000 +@@ -81,35 +81,35 @@ + "if testkey 101 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x00060000 0x00540000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " \ + "bootm; " \ + "fi; " \ + "if testkey 2 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait; " \ + "bootm; " \ + "fi; " \ + "if testkey 18 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 rootwait; " \ + "bootm; " \ + "fi; " \ + "if testkey 3 ; " \ + "then " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 rootwait; " \ + "bootm; " \ + "fi; " \ + "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ +- "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home); " \ + "bootm; " + #else + #define CONFIG_BOOTCOMMAND "" // "run boot_flash" + #endif + +-#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192 mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)" + #define CONFIG_SETUP_MEMORY_TAGS 1 + #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ + #define CONFIG_INITRD_TAG 1 +@@ -304,9 +304,9 @@ + /* Note: fake mtd_id used, no linux mtd map file */ + + #define CONFIG_JFFS2_CMDLINE +-#define MTDIDS_DEFAULT "nand0=laze-0" ++#define MTDIDS_DEFAULT "nand0=sharpsl-nand" + //#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" +-#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++#define MTDPARTS_DEFAULT "mtdparts=sharpsl-nand:7168k(smf),CUSTOM_ROOTFS_SIZE(root),-(home)" + + /* + * SHARP SL NAND logical partition diff --git a/packages/u-boot/u-boot-git/pdaXrom-u-boot.patch b/packages/u-boot/u-boot-git/pdaXrom-u-boot.patch new file mode 100644 index 0000000000..9ceadde6dc --- /dev/null +++ b/packages/u-boot/u-boot-git/pdaXrom-u-boot.patch @@ -0,0 +1,4934 @@ +diff -Nur u-boot-2006-04-18-1106/CREDITS u-boot-2006-04-18-1106-new/CREDITS +--- u-boot-2006-04-18-1106/CREDITS 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/CREDITS 2006-07-05 11:19:44.000000000 +0000 +@@ -93,6 +93,12 @@ + E: jonathan.debruyne@siemens.atea.be + D: Port to Siemens IAD210 board + ++N: Alexander Chukov ++E: sash@pdaXrom.org ++D: initial support for Sharp Zaurus SL-C1000/3100 ++D: initial support for Sharp Zaurus SL-C7x0/C860 ++W: http://www.pdaXrom.org ++ + N: Ken Chou + E: kchou@ieee.org + D: Support for A3000 SBC board +diff -Nur u-boot-2006-04-18-1106/MAINTAINERS u-boot-2006-04-18-1106-new/MAINTAINERS +--- u-boot-2006-04-18-1106/MAINTAINERS 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/MAINTAINERS 2006-07-05 11:19:44.000000000 +0000 +@@ -379,6 +379,11 @@ + + AT91RM9200DK at91rm9200 + ++Alexander Chukov <sash@pdaXrom.org> ++ ++ akita xscale ++ corgi xscale ++ + George G. Davis <gdavis@mvista.com> + + assabet SA1100 +diff -Nur u-boot-2006-04-18-1106/MAKEALL u-boot-2006-04-18-1106-new/MAKEALL +--- u-boot-2006-04-18-1106/MAKEALL 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/MAKEALL 2006-07-05 11:19:44.000000000 +0000 +@@ -206,7 +206,7 @@ + adsvix cerf250 cradle csb226 \ + delta innokom lubbock pxa255_idp \ + wepep250 xaeniax xm250 xsengine \ +- zylonite \ ++ zylonite akita corgi \ + " + + LIST_ixp="ixdp425" +diff -Nur u-boot-2006-04-18-1106/Makefile u-boot-2006-04-18-1106-new/Makefile +--- u-boot-2006-04-18-1106/Makefile 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/Makefile 2006-07-05 11:19:44.000000000 +0000 +@@ -61,7 +61,7 @@ + CROSS_COMPILE = powerpc-linux- + endif + ifeq ($(ARCH),arm) +-CROSS_COMPILE = arm-linux- ++CROSS_COMPILE = armv5tel-linux- + endif + ifeq ($(ARCH),i386) + ifeq ($(HOSTARCH),i386) +@@ -1709,6 +1709,12 @@ + zylonite_config : + @./mkconfig $(@:_config=) arm pxa zylonite + ++akita_config : unconfig ++ @./mkconfig $(@:_config=) arm pxa akita ++ ++corgi_config : unconfig ++ @./mkconfig $(@:_config=) arm pxa corgi ++ + ######################################################################### + ## ARM1136 Systems + ######################################################################### +diff -Nur u-boot-2006-04-18-1106/README u-boot-2006-04-18-1106-new/README +--- u-boot-2006-04-18-1106/README 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/README 2006-07-05 11:19:44.000000000 +0000 +@@ -311,7 +311,8 @@ + CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400, + CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, + CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, +- CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 ++ CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9, ++ CONFIG_AKITA, CONFIG_CORGI + + MicroBlaze based boards: + ------------------------ +diff -Nur u-boot-2006-04-18-1106/board/akita/Makefile u-boot-2006-04-18-1106-new/board/akita/Makefile +--- u-boot-2006-04-18-1106/board/akita/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/Makefile 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,51 @@ ++# ++# board/akita/Makefile ++# ++# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++# ++# (C) Copyright 2000 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := akita.o nand.o kbd.o ++SOBJS := lowlevel_init.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +diff -Nur u-boot-2006-04-18-1106/board/akita/akita.c u-boot-2006-04-18-1106-new/board/akita/akita.c +--- u-boot-2006-04-18-1106/board/akita/akita.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/akita.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,89 @@ ++/* ++ * board/akita/akita.c ++ * ++ * Configuration settings for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++void set_turbo_mode(void); ++ ++/* ------------------------------------------------------------------------- */ ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* memory and cpu-speed are setup before relocation */ ++ /* so we do _nothing_ here */ ++ ++ /* arch number of Sharp Zaurus Akita : MACH_TYPE_AKITA */ ++ gd->bd->bi_arch_number = 744; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0xa0000100; ++ ++ /* set cpu turbo mode */ ++ set_turbo_mode(); ++ ++ spitzkbd_init(); ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ setenv("stdout", "serial"); ++ setenv("stderr", "serial"); ++ return 0; ++} ++ ++ ++int dram_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ gd->bd->bi_dram[1].start = PHYS_SDRAM_2; ++ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; ++ gd->bd->bi_dram[2].start = PHYS_SDRAM_3; ++ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; ++ gd->bd->bi_dram[3].start = PHYS_SDRAM_4; ++ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; ++ ++ return 0; ++} +diff -Nur u-boot-2006-04-18-1106/board/akita/config.mk u-boot-2006-04-18-1106-new/board/akita/config.mk +--- u-boot-2006-04-18-1106/board/akita/config.mk 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/config.mk 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1 @@ ++TEXT_BASE = 0xa3000000 +diff -Nur u-boot-2006-04-18-1106/board/akita/kbd.c u-boot-2006-04-18-1106-new/board/akita/kbd.c +--- u-boot-2006-04-18-1106/board/akita/kbd.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/kbd.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,261 @@ ++/* ++ * board/akita/kbd.c ++ * ++ * Keyboard driver for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from: ++ * ++ * linux/drivers/input/keyboard/spitzkbd.c ++ * ++ * Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series) ++ * ++ * Copyright (C) 2005 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <command.h> ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++#define GPIO_DFLT_LOW 0x400 ++#define GPIO_DFLT_HIGH 0x800 ++ ++void pxa_gpio_mode(int gpio_mode) ++{ ++ int gpio = gpio_mode & GPIO_MD_MASK_NR; ++ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; ++ int gafr; ++ ++ if (gpio_mode & GPIO_DFLT_LOW) ++ GPCR(gpio) = GPIO_bit(gpio); ++ else if (gpio_mode & GPIO_DFLT_HIGH) ++ GPSR(gpio) = GPIO_bit(gpio); ++ if (gpio_mode & GPIO_MD_MASK_DIR) ++ GPDR(gpio) |= GPIO_bit(gpio); ++ else ++ GPDR(gpio) &= ~GPIO_bit(gpio); ++ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); ++ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); ++} ++ ++#define SPITZ_KEY_STROBE_NUM (11) ++#define SPITZ_KEY_SENSE_NUM (7) ++ ++#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 ++#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 ++#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 ++#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 ++#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 ++#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 ++#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 ++#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 ++ ++#define SPITZ_GPIO_KEY_STROBE0 88 ++#define SPITZ_GPIO_KEY_STROBE1 23 ++#define SPITZ_GPIO_KEY_STROBE2 24 ++#define SPITZ_GPIO_KEY_STROBE3 25 ++#define SPITZ_GPIO_KEY_STROBE4 26 ++#define SPITZ_GPIO_KEY_STROBE5 27 ++#define SPITZ_GPIO_KEY_STROBE6 52 ++#define SPITZ_GPIO_KEY_STROBE7 103 ++#define SPITZ_GPIO_KEY_STROBE8 107 ++#define SPITZ_GPIO_KEY_STROBE9 108 ++#define SPITZ_GPIO_KEY_STROBE10 114 ++ ++#define SPITZ_GPIO_KEY_SENSE0 12 ++#define SPITZ_GPIO_KEY_SENSE1 17 ++#define SPITZ_GPIO_KEY_SENSE2 91 ++#define SPITZ_GPIO_KEY_SENSE3 34 ++#define SPITZ_GPIO_KEY_SENSE4 36 ++#define SPITZ_GPIO_KEY_SENSE5 38 ++#define SPITZ_GPIO_KEY_SENSE6 39 ++ ++#define SPITZ_GPIO_ON_KEY (95) ++ ++#define KB_ROWS 7 ++#define KB_COLS 11 ++#define KB_ROWMASK(r) (1 << (r)) ++#define SCANCODE(r,c) (((r)<<4) + (c) + 1) ++#define NR_SCANCODES ((KB_ROWS<<4) + 1) ++ ++#define SCAN_INTERVAL (50) /* ms */ ++#define HINGE_SCAN_INTERVAL (150) /* ms */ ++ ++#define KB_DISCHARGE_DELAY 10 ++#define KB_ACTIVATE_DELAY 10 ++ ++static int spitz_strobes[] = { ++ SPITZ_GPIO_KEY_STROBE0, ++ SPITZ_GPIO_KEY_STROBE1, ++ SPITZ_GPIO_KEY_STROBE2, ++ SPITZ_GPIO_KEY_STROBE3, ++ SPITZ_GPIO_KEY_STROBE4, ++ SPITZ_GPIO_KEY_STROBE5, ++ SPITZ_GPIO_KEY_STROBE6, ++ SPITZ_GPIO_KEY_STROBE7, ++ SPITZ_GPIO_KEY_STROBE8, ++ SPITZ_GPIO_KEY_STROBE9, ++ SPITZ_GPIO_KEY_STROBE10, ++}; ++ ++static int spitz_senses[] = { ++ SPITZ_GPIO_KEY_SENSE0, ++ SPITZ_GPIO_KEY_SENSE1, ++ SPITZ_GPIO_KEY_SENSE2, ++ SPITZ_GPIO_KEY_SENSE3, ++ SPITZ_GPIO_KEY_SENSE4, ++ SPITZ_GPIO_KEY_SENSE5, ++ SPITZ_GPIO_KEY_SENSE6, ++}; ++ ++static inline void spitzkbd_discharge_all(void) ++{ ++ /* STROBE All HiZ */ ++ GPCR0 = SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; ++ GPCR1 = SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; ++ GPCR2 = SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; ++ GPCR3 = SPITZ_GPIO_G3_STROBE_BIT; ++ GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; ++} ++ ++static inline void spitzkbd_activate_all(void) ++{ ++ /* STROBE ALL -> High */ ++ GPSR0 = SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR0 |= SPITZ_GPIO_G0_STROBE_BIT; ++ GPSR1 = SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR1 |= SPITZ_GPIO_G1_STROBE_BIT; ++ GPSR2 = SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR2 |= SPITZ_GPIO_G2_STROBE_BIT; ++ GPSR3 = SPITZ_GPIO_G3_STROBE_BIT; ++ GPDR3 |= SPITZ_GPIO_G3_STROBE_BIT; ++ ++ udelay(KB_DISCHARGE_DELAY); ++} ++ ++static inline void spitzkbd_activate_col(int col) ++{ ++ int gpio = spitz_strobes[col]; ++ GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; ++ GPSR(gpio) = GPIO_bit(gpio); ++ GPDR(gpio) |= GPIO_bit(gpio); ++} ++ ++static inline void spitzkbd_reset_col(int col) ++{ ++ int gpio = spitz_strobes[col]; ++ GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; ++ GPCR(gpio) = GPIO_bit(gpio); ++ GPDR(gpio) |= GPIO_bit(gpio); ++} ++ ++static inline int spitzkbd_get_row_status(int col) ++{ ++ return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02) ++ | ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08) ++ | ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60); ++} ++ ++static int spitzkbd_scankeyboard(void) ++{ ++ unsigned int row, col, rowd; ++ unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0); ++ int ret = -1; ++ ++ num_pressed = 0; ++ for (col = 0; col < KB_COLS; col++) { ++ spitzkbd_discharge_all(); ++ udelay(KB_DISCHARGE_DELAY); ++ ++ spitzkbd_activate_col(col); ++ udelay(KB_ACTIVATE_DELAY); ++ ++ rowd = spitzkbd_get_row_status(col); ++ for (row = 0; row < KB_ROWS; row++) { ++ unsigned int scancode, pressed; ++ ++ scancode = SCANCODE(row, col); ++ pressed = rowd & KB_ROWMASK(row); ++ ++ if (pressed) ++ ret = scancode; ++ } ++ spitzkbd_reset_col(col); ++ } ++ ++ spitzkbd_activate_all(); ++ ++ if (pwrkey) ++ return -2; ++ ++ return ret; ++} ++ ++void spitzkbd_init(void) ++{ ++ int i; ++ ++ /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ ++ for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) ++ pxa_gpio_mode(spitz_senses[i] | GPIO_IN); ++ ++ /* Set Strobe lines as outputs - set high */ ++ for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) ++ pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); ++ ++ pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN); ++} ++ ++int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int scan; ++ ++ if (argc < 2) ++ return 1; ++ ++ scan = spitzkbd_scankeyboard(); ++ ++ ++// if (scan >= 0) ++// printf("Scan = %d\n", scan); ++// else ++// printf("Nothing!\n"); ++ ++ return !(simple_strtol(argv[1], NULL, 10) == scan); ++} ++ ++U_BOOT_CMD( ++ testkey, 2, 1, do_testkey, ++ "testkey - compare pressed key with arg\n", ++ "<key scancode>" ++); +diff -Nur u-boot-2006-04-18-1106/board/akita/lowlevel_init.S u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S +--- u-boot-2006-04-18-1106/board/akita/lowlevel_init.S 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,135 @@ ++/* ++ * board/akita/lowlevel_init.S ++ * ++ * Configuration settings for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * This was originally from the Lubbock u-boot port and from BLOB with cleanup ++ * ++ * NOTE: I haven't clean this up considerably, just enough to get it ++ * running. See hal_platform_setup.h for the source. See ++ * board/cradle/lowlevel_init.S for another PXA250 setup that is ++ * much cleaner. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++/* wait for coprocessor write complete */ ++ .macro CPWAIT reg ++ mrc p15,0,\reg,c2,c0,0 ++ mov \reg,\reg ++ sub pc,pc,#4 ++ .endm ++ ++/*********** Write out to HEX 7 segment leds *********/ ++ ++#undef DEBUG_HEXLOG ++ ++#ifdef DEBUG_HEXLOG ++#define LEDCTL 0x08000040 ++#define LEDDAT1 0x08000010 ++#define LEDDAT2 0x08000014 ++ ++.macro wait, count ++ mov r10, \count ++0: ++ subs r10, r10, #1 ++ bne 0b ++.endm ++ ++.macro hexlog_init ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ldr r11, =LEDDAT1 ++ mov r10, #0x0 ++ str r10, [r11] ++.endm ++ ++.macro hexlog, val ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ++ ldr r11, =LEDDAT1 ++ mov r10, \val ++ str r10, [r11] ++ ++ wait #0x400000 ++.endm ++ ++#else ++ ++.macro hexlog_init ++ nop ++.endm ++ ++.macro hexlog, val ++ nop ++.endm ++ ++#endif ++ ++/***********************************/ ++ ++/* ++ * Memory setup ++ */ ++ ++.globl lowlevel_init ++lowlevel_init: ++ ++ mov pc, lr ++ ++.globl set_turbo_mode ++ ++set_turbo_mode: ++ /* Turn on turbo mode */ ++ mrc p14, 0, r2, c6, c0, 0 ++ orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ ++ mcr p14, 0, r2, c6, c0, 0 ++ ++ /* Setup vectors */ ++ ldr r0, =TEXT_BASE ++ ldr r1, =TEXT_BASE+0x40 ++ ldr r2, =0x0 ++1: ++ ldr r3, [r0] ++ str r3, [r2] ++ add r0, r0, #4 ++ add r2, r2, #4 ++ cmp r0, r1 ++ bne 1b ++ ++ ldr r0, =0x0 ++ ldr r1, [r0, #4] ++ str r1, [r0] ++ ++ mov pc, lr +diff -Nur u-boot-2006-04-18-1106/board/akita/nand.c u-boot-2006-04-18-1106-new/board/akita/nand.c +--- u-boot-2006-04-18-1106/board/akita/nand.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/nand.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,169 @@ ++/* ++ * board/akita/nand.c ++ * ++ * NAND driver for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from mtd nand driver: ++ * ++ * drivers/mtd/nand/sharpsl.c ++ * ++ * Copyright (C) 2004 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) ++ ++#include <nand.h> ++#include <linux/mtd/nand_ecc.h> ++ ++static int sharpsl_io_base = CFG_NAND_BASE; ++ ++/* register offset */ ++#define ECCLPLB sharpsl_io_base+0x00 /* line parity 7 - 0 bit */ ++#define ECCLPUB sharpsl_io_base+0x04 /* line parity 15 - 8 bit */ ++#define ECCCP sharpsl_io_base+0x08 /* column parity 5 - 0 bit */ ++#define ECCCNTR sharpsl_io_base+0x0C /* ECC byte counter */ ++#define ECCCLRR sharpsl_io_base+0x10 /* cleare ECC */ ++#define FLASHIO sharpsl_io_base+0x14 /* Flash I/O */ ++#define FLASHCTL sharpsl_io_base+0x18 /* Flash Control */ ++ ++/* Flash control bit */ ++#define FLRYBY (1 << 5) ++#define FLCE1 (1 << 4) ++#define FLWP (1 << 3) ++#define FLALE (1 << 2) ++#define FLCLE (1 << 1) ++#define FLCE0 (1 << 0) ++ ++#define readb(address) *((volatile unsigned char *)(address)) ++#define writeb(v, address) *((volatile unsigned char *)(address))=v ++ ++/* ++ * hardware specific access to control-lines ++ */ ++static void ++sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd) ++{ ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ writeb(readb(FLASHCTL) | FLCLE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRCLE: ++ writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETALE: ++ writeb(readb(FLASHCTL) | FLALE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRALE: ++ writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETNCE: ++ writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL); ++ break; ++ case NAND_CTL_CLRNCE: ++ writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL); ++ break; ++ } ++} ++ ++static int ++sharpsl_nand_dev_ready(struct mtd_info* mtd) ++{ ++ return !((readb(FLASHCTL) & FLRYBY) == 0); ++} ++ ++static void ++sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode) ++{ ++ writeb(0 ,ECCCLRR); ++} ++ ++static int ++sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat, ++ u_char* ecc_code) ++{ ++ ecc_code[0] = ~readb(ECCLPUB); ++ ecc_code[1] = ~readb(ECCLPLB); ++ ecc_code[2] = (~readb(ECCCP) << 2) | 0x03; ++ return readb(ECCCNTR) != 0; ++} ++ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++ ++static struct nand_bbt_descr sharpsl_akita_bbt = { ++ .options = 0, ++ .offs = 4, ++ .len = 1, ++ .pattern = scan_ff_pattern ++}; ++ ++static struct nand_oobinfo akita_oobinfo = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 24, ++ .eccpos = { ++ 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, ++ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, ++ 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, ++ .oobfree = { {0x08, 0x09} } ++}; ++ ++/* ++ * Board-specific NAND initialization. The following members of the ++ * argument are board-specific (per include/linux/mtd/nand.h): ++ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device ++ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device ++ * - hwcontrol: hardwarespecific function for accesing control-lines ++ * - dev_ready: hardwarespecific function for accesing device ready/busy line ++ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must ++ * only be provided if a hardware ECC is available ++ * - eccmode: mode of ecc, see defines ++ * - chip_delay: chip dependent delay for transfering data from array to ++ * read regs (tR) ++ * - options: various chip options. They can partly be set to inform ++ * nand_scan about special functionality. See the defines for further ++ * explanation ++ * Members with a "?" were not set in the merged testing-NAND branch, ++ * so they are not set here either. ++ */ ++void board_nand_init(struct nand_chip *nand) ++{ ++ writeb(readb(FLASHCTL) | FLWP, FLASHCTL); ++ ++ nand->IO_ADDR_R = FLASHIO; ++ nand->IO_ADDR_W = FLASHIO; ++ nand->hwcontrol = sharpsl_nand_hwcontrol; ++ nand->dev_ready = sharpsl_nand_dev_ready; ++ nand->eccmode = NAND_ECC_HW3_256; ++ nand->chip_delay = 15; ++ nand->options = NAND_SAMSUNG_LP_OPTIONS; ++ nand->badblock_pattern = &sharpsl_akita_bbt; ++ nand->autooob = &akita_oobinfo; ++ nand->enable_hwecc = sharpsl_nand_enable_hwecc; ++ nand->calculate_ecc = sharpsl_nand_calculate_ecc; ++ nand->correct_data = nand_correct_data; ++} ++#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ +diff -Nur u-boot-2006-04-18-1106/board/akita/u-boot.lds u-boot-2006-04-18-1106-new/board/akita/u-boot.lds +--- u-boot-2006-04-18-1106/board/akita/u-boot.lds 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/u-boot.lds 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/pxa/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +diff -Nur u-boot-2006-04-18-1106/board/corgi/Makefile u-boot-2006-04-18-1106-new/board/corgi/Makefile +--- u-boot-2006-04-18-1106/board/corgi/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/Makefile 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,51 @@ ++# ++# board/corgi/Makefile ++# ++# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++# ++# (C) Copyright 2000 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := corgi.o nand.o kbd.o ++SOBJS := lowlevel_init.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +diff -Nur u-boot-2006-04-18-1106/board/corgi/config.mk u-boot-2006-04-18-1106-new/board/corgi/config.mk +--- u-boot-2006-04-18-1106/board/corgi/config.mk 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/config.mk 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1 @@ ++TEXT_BASE = 0xa1000000 +diff -Nur u-boot-2006-04-18-1106/board/corgi/corgi.c u-boot-2006-04-18-1106-new/board/corgi/corgi.c +--- u-boot-2006-04-18-1106/board/corgi/corgi.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/corgi.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,87 @@ ++/* ++ * board/corgi/corgi.c ++ * ++ * Configuration settings for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++/* ------------------------------------------------------------------------- */ ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* memory and cpu-speed are setup before relocation */ ++ /* so we do _nothing_ here */ ++ ++ /* arch number of Sharp Zaurus Corgi : MACH_TYPE_CORGI */ ++ gd->bd->bi_arch_number = 423; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0xa0000100; ++ ++ /* set cpu turbo mode */ ++ set_turbo_mode(); ++ ++ corgikbd_init(); ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ setenv("stdout", "serial"); ++ setenv("stderr", "serial"); ++ return 0; ++} ++ ++ ++int dram_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ gd->bd->bi_dram[1].start = PHYS_SDRAM_2; ++ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; ++ gd->bd->bi_dram[2].start = PHYS_SDRAM_3; ++ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; ++ gd->bd->bi_dram[3].start = PHYS_SDRAM_4; ++ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; ++ ++ return 0; ++} +diff -Nur u-boot-2006-04-18-1106/board/corgi/kbd.c u-boot-2006-04-18-1106-new/board/corgi/kbd.c +--- u-boot-2006-04-18-1106/board/corgi/kbd.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/kbd.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,202 @@ ++/* ++ * board/corgi/kbd.c ++ * ++ * Keyboard driver for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from: ++ * ++ * linux/drivers/input/keyboard/spitzkbd.c ++ * ++ * Keyboard driver for Sharp Corgi models (SL-C7xx) ++ * ++ * Copyright (C) 2005 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <command.h> ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++#define GPIO_DFLT_LOW 0x400 ++#define GPIO_DFLT_HIGH 0x800 ++ ++void pxa_gpio_mode(int gpio_mode) ++{ ++ int gpio = gpio_mode & GPIO_MD_MASK_NR; ++ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; ++ int gafr; ++ ++ if (gpio_mode & GPIO_DFLT_LOW) ++ GPCR(gpio) = GPIO_bit(gpio); ++ else if (gpio_mode & GPIO_DFLT_HIGH) ++ GPSR(gpio) = GPIO_bit(gpio); ++ if (gpio_mode & GPIO_MD_MASK_DIR) ++ GPDR(gpio) |= GPIO_bit(gpio); ++ else ++ GPDR(gpio) &= ~GPIO_bit(gpio); ++ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); ++ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); ++} ++ ++/* ++ * Corgi Keyboard Definitions ++ */ ++#define CORGI_KEY_STROBE_NUM (12) ++#define CORGI_KEY_SENSE_NUM (8) ++#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc) ++#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000) ++#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26) ++#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003) ++#define CORGI_GPIO_LOW_SENSE_LSHIFT (6) ++#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a)) ++#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a)) ++#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0) ++#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000) ++#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f) ++#define CORGI_GPIO_KEY_SENSE(a) (58+(a)) ++#define CORGI_GPIO_KEY_STROBE(a) (66+(a)) ++ ++#define CORGI_GPIO_AK_INT (4) /* Headphone Jack Control Interrupt */ ++ ++#define KB_ROWS 8 ++#define KB_COLS 12 ++#define KB_ROWMASK(r) (1 << (r)) ++#define SCANCODE(r,c) ( ((r)<<4) + (c) + 1 ) ++/* zero code, 124 scancodes */ ++#define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 ) ++ ++#define SCAN_INTERVAL (50) /* ms */ ++#define HINGE_SCAN_INTERVAL (250) /* ms */ ++ ++#define KB_DISCHARGE_DELAY 10 ++#define KB_ACTIVATE_DELAY 10 ++ ++static inline void corgikbd_discharge_all(void) ++{ ++ /* STROBE All HiZ */ ++ GPCR2 = CORGI_GPIO_ALL_STROBE_BIT; ++ GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT; ++} ++ ++static inline void corgikbd_activate_all(void) ++{ ++ /* STROBE ALL -> High */ ++ GPSR2 = CORGI_GPIO_ALL_STROBE_BIT; ++ GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT; ++ ++ udelay(KB_DISCHARGE_DELAY); ++ ++ /* Clear any interrupts we may have triggered when altering the GPIO lines */ ++ GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT; ++ GEDR2 = CORGI_GPIO_LOW_SENSE_BIT; ++} ++ ++static inline void corgikbd_activate_col(int col) ++{ ++ /* STROBE col -> High, not col -> HiZ */ ++ GPSR2 = CORGI_GPIO_STROBE_BIT(col); ++ GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); ++} ++ ++static inline void corgikbd_reset_col(int col) ++{ ++ /* STROBE col -> Low */ ++ GPCR2 = CORGI_GPIO_STROBE_BIT(col); ++ /* STROBE col -> out, not col -> HiZ */ ++ GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); ++} ++ ++#define GET_ROWS_STATUS(c) (((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT)) ++ ++static int corgikbd_scankeyboard(void) ++{ ++ unsigned int row, col, rowd; ++ unsigned int num_pressed; ++ int ret = -1; ++ ++ num_pressed = 0; ++ for (col = 0; col < KB_COLS; col++) { ++ corgikbd_discharge_all(); ++ udelay(KB_DISCHARGE_DELAY); ++ ++ corgikbd_activate_col(col); ++ udelay(KB_ACTIVATE_DELAY); ++ ++ rowd = GET_ROWS_STATUS(col); ++ for (row = 0; row < KB_ROWS; row++) { ++ unsigned int scancode, pressed; ++ ++ scancode = SCANCODE(row, col); ++ pressed = rowd & KB_ROWMASK(row); ++ ++ if (pressed) ++ ret = scancode; ++ } ++ corgikbd_reset_col(col); ++ } ++ ++ corgikbd_activate_all(); ++ ++ return ret; ++} ++ ++void corgikbd_init(void) ++{ ++ int i; ++ ++ /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ ++ for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) ++ pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN); ++ ++ /* Set Strobe lines as outputs - set high */ ++ for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) ++ pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); ++ ++ /* Setup the headphone jack as an input */ ++ pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN); ++} ++ ++int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int scan; ++ ++ if (argc < 2) ++ return 1; ++ ++ scan = corgikbd_scankeyboard(); ++ ++ ++// if (scan >= 0) ++// printf("Scan = %d\n", scan); ++// else ++// printf("Nothing!\n"); ++ ++ return !(simple_strtol(argv[1], NULL, 10) == scan); ++} ++ ++U_BOOT_CMD( ++ testkey, 2, 1, do_testkey, ++ "testkey - compare pressed key with arg\n", ++ "<key scancode>" ++); +diff -Nur u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S +--- u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,136 @@ ++/* ++ * board/corgi/lowlevel_init.S ++ * ++ * Configuration settings for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * This was originally from the Lubbock u-boot port and from BLOB with cleanup ++ * ++ * NOTE: I haven't clean this up considerably, just enough to get it ++ * running. See hal_platform_setup.h for the source. See ++ * board/cradle/lowlevel_init.S for another PXA250 setup that is ++ * much cleaner. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++/* wait for coprocessor write complete */ ++ .macro CPWAIT reg ++ mrc p15,0,\reg,c2,c0,0 ++ mov \reg,\reg ++ sub pc,pc,#4 ++ .endm ++ ++/*********** Write out to HEX 7 segment leds *********/ ++ ++#undef DEBUG_HEXLOG ++ ++#ifdef DEBUG_HEXLOG ++#define LEDCTL 0x08000040 ++#define LEDDAT1 0x08000010 ++#define LEDDAT2 0x08000014 ++ ++.macro wait, count ++ mov r10, \count ++0: ++ subs r10, r10, #1 ++ bne 0b ++.endm ++ ++.macro hexlog_init ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ldr r11, =LEDDAT1 ++ mov r10, #0x0 ++ str r10, [r11] ++.endm ++ ++.macro hexlog, val ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ++ ldr r11, =LEDDAT1 ++ mov r10, \val ++ str r10, [r11] ++ ++ wait #0x400000 ++.endm ++ ++#else ++ ++.macro hexlog_init ++ nop ++.endm ++ ++.macro hexlog, val ++ nop ++.endm ++ ++#endif ++ ++/***********************************/ ++ ++/* ++ * Memory setup ++ */ ++ ++.globl lowlevel_init ++lowlevel_init: ++ ++ mov pc, lr ++ ++.globl set_turbo_mode ++ ++set_turbo_mode: ++ /* Turn on turbo mode */ ++ mrc p14, 0, r2, c6, c0, 0 ++ orr r2, r2, #0x3 /* Turbo, Freq change */ ++ mcr p14, 0, r2, c6, c0, 0 ++ ++ ++ /* Setup vectors */ ++ ldr r0, =TEXT_BASE ++ ldr r1, =TEXT_BASE+0x40 ++ ldr r2, =0x0 ++1: ++ ldr r3, [r0] ++ str r3, [r2] ++ add r0, r0, #4 ++ add r2, r2, #4 ++ cmp r0, r1 ++ bne 1b ++ ++ ldr r0, =0x0 ++ ldr r1, [r0, #4] ++ str r1, [r0] ++ ++ mov pc, lr +diff -Nur u-boot-2006-04-18-1106/board/corgi/nand.c u-boot-2006-04-18-1106-new/board/corgi/nand.c +--- u-boot-2006-04-18-1106/board/corgi/nand.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/nand.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,157 @@ ++/* ++ * board/corgi/nand.c ++ * ++ * NAND driver for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from mtd nand driver: ++ * ++ * drivers/mtd/nand/sharpsl.c ++ * ++ * Copyright (C) 2004 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) ++ ++#include <nand.h> ++#include <linux/mtd/nand_ecc.h> ++ ++static int sharpsl_io_base = CFG_NAND_BASE; ++ ++/* register offset */ ++#define ECCLPLB sharpsl_io_base+0x00 /* line parity 7 - 0 bit */ ++#define ECCLPUB sharpsl_io_base+0x04 /* line parity 15 - 8 bit */ ++#define ECCCP sharpsl_io_base+0x08 /* column parity 5 - 0 bit */ ++#define ECCCNTR sharpsl_io_base+0x0C /* ECC byte counter */ ++#define ECCCLRR sharpsl_io_base+0x10 /* cleare ECC */ ++#define FLASHIO sharpsl_io_base+0x14 /* Flash I/O */ ++#define FLASHCTL sharpsl_io_base+0x18 /* Flash Control */ ++ ++/* Flash control bit */ ++#define FLRYBY (1 << 5) ++#define FLCE1 (1 << 4) ++#define FLWP (1 << 3) ++#define FLALE (1 << 2) ++#define FLCLE (1 << 1) ++#define FLCE0 (1 << 0) ++ ++#define readb(address) *((volatile unsigned char *)(address)) ++#define writeb(v, address) *((volatile unsigned char *)(address))=v ++ ++/* ++ * hardware specific access to control-lines ++ */ ++static void ++sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd) ++{ ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ writeb(readb(FLASHCTL) | FLCLE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRCLE: ++ writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETALE: ++ writeb(readb(FLASHCTL) | FLALE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRALE: ++ writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETNCE: ++ writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL); ++ break; ++ case NAND_CTL_CLRNCE: ++ writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL); ++ break; ++ } ++} ++ ++static int ++sharpsl_nand_dev_ready(struct mtd_info* mtd) ++{ ++ return !((readb(FLASHCTL) & FLRYBY) == 0); ++} ++ ++static void ++sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode) ++{ ++ writeb(0 ,ECCCLRR); ++} ++ ++static int ++sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat, ++ u_char* ecc_code) ++{ ++ ecc_code[0] = ~readb(ECCLPUB); ++ ecc_code[1] = ~readb(ECCLPLB); ++ ecc_code[2] = (~readb(ECCCP) << 2) | 0x03; ++ return readb(ECCCNTR) != 0; ++} ++ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++ ++static struct nand_bbt_descr sharpsl_bbt = { ++ .options = 0, ++ .offs = 4, ++ .len = 2, ++ .pattern = scan_ff_pattern ++}; ++ ++/* ++ * Board-specific NAND initialization. The following members of the ++ * argument are board-specific (per include/linux/mtd/nand.h): ++ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device ++ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device ++ * - hwcontrol: hardwarespecific function for accesing control-lines ++ * - dev_ready: hardwarespecific function for accesing device ready/busy line ++ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must ++ * only be provided if a hardware ECC is available ++ * - eccmode: mode of ecc, see defines ++ * - chip_delay: chip dependent delay for transfering data from array to ++ * read regs (tR) ++ * - options: various chip options. They can partly be set to inform ++ * nand_scan about special functionality. See the defines for further ++ * explanation ++ * Members with a "?" were not set in the merged testing-NAND branch, ++ * so they are not set here either. ++ */ ++void board_nand_init(struct nand_chip *nand) ++{ ++ writeb(readb(FLASHCTL) | FLWP, FLASHCTL); ++ ++ nand->IO_ADDR_R = FLASHIO; ++ nand->IO_ADDR_W = FLASHIO; ++ nand->hwcontrol = sharpsl_nand_hwcontrol; ++ nand->dev_ready = sharpsl_nand_dev_ready; ++ nand->eccmode = NAND_ECC_HW3_256; ++ nand->chip_delay = 15; ++ nand->badblock_pattern = &sharpsl_bbt; ++ nand->enable_hwecc = sharpsl_nand_enable_hwecc; ++ nand->calculate_ecc = sharpsl_nand_calculate_ecc; ++ nand->correct_data = nand_correct_data; ++} ++#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ +diff -Nur u-boot-2006-04-18-1106/board/corgi/u-boot.lds u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds +--- u-boot-2006-04-18-1106/board/corgi/u-boot.lds 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/pxa/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +diff -Nur u-boot-2006-04-18-1106/common/cmd_nand.c u-boot-2006-04-18-1106-new/common/cmd_nand.c +--- u-boot-2006-04-18-1106/common/cmd_nand.c 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/common/cmd_nand.c 2006-07-05 11:19:44.000000000 +0000 +@@ -81,6 +81,63 @@ + return 0; + } + ++#ifdef NAND_LOGICAL ++///////////////////////////////////////////////////////////////////// ++// oob structure ++///////////////////////////////////////////////////////////////////// ++ ++#define NAND_NOOB_LOGADDR_00 8 ++#define NAND_NOOB_LOGADDR_01 9 ++#define NAND_NOOB_LOGADDR_10 10 ++#define NAND_NOOB_LOGADDR_11 11 ++#define NAND_NOOB_LOGADDR_20 12 ++#define NAND_NOOB_LOGADDR_21 13 ++ ++static uint nand_get_logical_no(unsigned char *oob) ++{ ++ unsigned short us,bit; ++ int par; ++ int good0, good1; ++ ++ if(oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] && ++ oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]){ ++ good0 = NAND_NOOB_LOGADDR_00; ++ good1 = NAND_NOOB_LOGADDR_01; ++ }else ++ if(oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] && ++ oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]){ ++ good0 = NAND_NOOB_LOGADDR_10; ++ good1 = NAND_NOOB_LOGADDR_11; ++ }else ++ if(oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] && ++ oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]){ ++ good0 = NAND_NOOB_LOGADDR_20; ++ good1 = NAND_NOOB_LOGADDR_21; ++ }else{ ++ return (uint)-1; ++ } ++ ++ us = (((unsigned short)(oob[good0]) & 0x00ff) << 0) | ++ (((unsigned short)(oob[good1]) & 0x00ff) << 8); ++ ++ par = 0; ++ for(bit = 0x0001; bit != 0; bit <<= 1){ ++ if(us & bit){ ++ par++; ++ } ++ } ++ if(par & 1){ ++ return (uint)-2; ++ } ++ ++ if(us == 0xffff){ ++ return 0xffff; ++ }else{ ++ return ((us & 0x07fe) >> 1); ++ } ++} ++#endif ++ + /* ------------------------------------------------------------------------- */ + + static void +@@ -245,6 +302,55 @@ + if (off == 0 && size == 0) + return 1; + ++#ifdef NAND_LOGICAL ++ s = strchr(cmd, '.'); ++ if (s != NULL) { ++ if (strcmp(s, ".logical") == 0) { ++ int blocks = NAND_LOGICAL_SIZE / nand->erasesize; ++ ulong *log2phy = malloc(blocks * sizeof(ulong)); ++ u_char *oobuf = malloc(nand->oobblock + nand->oobsize); ++ int i; ++ ulong offset; ++ ret = 1; ++ for (i = 0; i < blocks; i++) ++ log2phy[i] = (uint) -1; ++ offset = 0; ++ for (i = 0; i < blocks; i++) { ++ ret = nand_read_raw(nand, oobuf, offset, nand->oobblock, nand->oobsize); ++ if (!ret) { ++ int log_no = nand_get_logical_no(oobuf + nand->oobblock); ++ if (((int)log_no >= 0) && (log_no < blocks)) { ++ log2phy[log_no] = offset; ++ //printf("NAND logical - %08X -> %04X\n", offset, log_no); ++ } ++ } ++ offset += nand->erasesize; ++ } ++ ++ for (i = 0; i < size / nand->erasesize; i++) { ++ ulong sz = nand->erasesize; ++ offset = log2phy[off / nand->erasesize]; ++ if ((int)offset < 0) { ++ printf("NAND logical - offset %08X not found\n", off); ++ return 1; ++ } ++ //printf("NAND logical - %04X -> %08X\n", off / nand->erasesize, offset); ++ ret = nand_read(nand, offset, &sz, (u_char *)addr); ++ if (ret) { ++ printf("NAND logical - offset %08X, read error\n", off); ++ return 1; ++ } ++ off += nand->erasesize; ++ addr += nand->erasesize; ++ } ++ printf(" %d bytes read from NAND logical\n", size); ++ free(oobuf); ++ free(log2phy); ++ return ret == 0 ? 0 : 1; ++ } ++ } ++#endif ++ + i = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ + printf("\nNAND %s: device %d offset %u, size %u ... ", + i ? "read" : "write", nand_curr_device, off, size); +diff -Nur u-boot-2006-04-18-1106/cpu/pxa/config.mk u-boot-2006-04-18-1106-new/cpu/pxa/config.mk +--- u-boot-2006-04-18-1106/cpu/pxa/config.mk 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/cpu/pxa/config.mk 2006-07-05 11:19:44.000000000 +0000 +@@ -22,8 +22,7 @@ + # MA 02111-1307 USA + # + +-PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ +- -msoft-float ++PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 -fomit-frame-pointer + + #PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100 + PLATFORM_CPPFLAGS += -march=armv5 -mtune=xscale +@@ -32,5 +31,5 @@ + # Supply options according to compiler version + # + # ======================================================================== +-PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) ++#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) + PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) +diff -Nur u-boot-2006-04-18-1106/cpu/pxa/start.S u-boot-2006-04-18-1106-new/cpu/pxa/start.S +--- u-boot-2006-04-18-1106/cpu/pxa/start.S 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/cpu/pxa/start.S 2006-07-05 11:19:44.000000000 +0000 +@@ -42,6 +42,7 @@ + ldr pc, _irq + ldr pc, _fiq + ++_reset: .word reset + _undefined_instruction: .word undefined_instruction + _software_interrupt: .word software_interrupt + _prefetch_abort: .word prefetch_abort +diff -Nur u-boot-2006-04-18-1106/fs/cramfs/cramfs.c u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c +--- u-boot-2006-04-18-1106/fs/cramfs/cramfs.c 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c 2006-07-05 11:19:44.000000000 +0000 +@@ -44,8 +44,13 @@ + + /* CPU address space offset calculation macro, struct part_info offset is + * device address space offset, so we need to shift it by a device start address. */ ++#if (CONFIG_COMMANDS & CFG_CMD_FLASH) + extern flash_info_t flash_info[]; + #define PART_OFFSET(x) (x->offset + flash_info[x->dev->id->num].start[0]) ++#else ++static struct cramfs_super super_fake; ++#define PART_OFFSET(x) (&super_fake) ++#endif + + static int cramfs_read_super (struct part_info *info) + { +diff -Nur u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h +--- u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h 2006-07-05 11:19:44.000000000 +0000 +@@ -1269,15 +1269,16 @@ + #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) + #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +-#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) +-#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) +-#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) +-#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) +-#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) +-#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) +-#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) +-#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ +- ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) ++#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) ++#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) ++#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) ++#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) ++#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) ++#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) ++#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) ++#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ ++ ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) ++ + #else + + #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +diff -Nur u-boot-2006-04-18-1106/include/configs/akita.h u-boot-2006-04-18-1106-new/include/configs/akita.h +--- u-boot-2006-04-18-1106/include/configs/akita.h 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/include/configs/akita.h 2006-07-13 11:00:46.000000000 +0000 +@@ -0,0 +1,324 @@ ++/* ++ * include/configs/akita.h ++ * ++ * Configuration settings for the Sharp Zaurus SL-C1000/C3100. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++ ++#undef SKIP_CONFIG_RELOCATE_UBOOT ++ ++#undef CONFIG_HARD_I2C ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ ++#define CONFIG_AKITA 1 /* on Sharp Zaurus Akita */ ++//#define CONFIG_MMC 1 ++#define BOARD_LATE_INIT 1 ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define RTC 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++//#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_FFUART 1 /* we use FFUART on Mainstone */ ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_BAUDRATE 115200 ++//#define CONFIG_DOS_PARTITION 1 ++ ++#undef CONFIG_SHOW_BOOT_PROGRESS ++ ++#if 1 ++#define CONFIG_BOOTDELAY 1 ++#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds\n" ++ ++#define CONFIG_BOOTCOMMAND \ ++ "if testkey 101 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x00060000 0x00540000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 2 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 18 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 3 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " \ ++ "bootm; " ++#else ++#define CONFIG_BOOTCOMMAND "" // "run boot_flash" ++#endif ++ ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192" ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_COMMANDS (( \ ++ CONFIG_CMD_DFL | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_JFFS2 \ ++ ) & ~( \ ++ CFG_CMD_NET | \ ++ CFG_CMD_FLASH | \ ++ CFG_CMD_IMLS \ ++ )) ++ ++// CFG_CMD_ENV ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_HUSH_PARSER 1 ++#define CFG_PROMPT_HUSH_PS2 "> " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_DEVICE_NULLDEV 1 ++ ++#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ ++ ++#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ ++#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ ++ ++ /* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_MMC_BASE 0xF0000000 ++ ++/* ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ ++#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ ++#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ ++#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ ++#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ ++ ++#define PHYS_FLASH_1 0xd4000000 /* Flash Bank #1 */ ++ ++#define CFG_DRAM_BASE 0xa0000000 ++#define CFG_DRAM_SIZE 0x04000000 ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/* ++ * GPIO settings for Mainstone ++ */ ++ ++#define CFG_GPSR0_VAL 0x00708800 ++#define CFG_GPSR1_VAL 0x03cf0002 ++#define CFG_GPSR2_VAL 0x0021FC00 ++#define CFG_GPSR3_VAL 0x00000000 ++ ++#define CFG_GPCR0_VAL 0x00001000 ++#define CFG_GPCR1_VAL 0x00000000 ++#define CFG_GPCR2_VAL 0x00000000 ++#define CFG_GPCR3_VAL 0x00000000 ++ ++#define CFG_GPDR0_VAL 0xC27B9C04 ++#define CFG_GPDR1_VAL 0x00EFAA83 ++#define CFG_GPDR2_VAL 0x0E23FC00 ++#define CFG_GPDR3_VAL 0x001E1F81 ++ ++#define CFG_GAFR0_L_VAL 0x94F00000 ++#define CFG_GAFR0_U_VAL 0x015A859A ++#define CFG_GAFR1_L_VAL 0x999A955A ++#define CFG_GAFR1_U_VAL 0x0005A4AA ++#define CFG_GAFR2_L_VAL 0x6AA00000 ++#define CFG_GAFR2_U_VAL 0x55A8041A ++#define CFG_GAFR3_L_VAL 0x56AA955A ++#define CFG_GAFR3_U_VAL 0x00000001 ++ ++#define CFG_PSSR_VAL 0x20 // ??????????? ++ ++/* ++ * PCMCIA and CF Interfaces ++ */ ++#define CFG_MECR_VAL 0x00000001 ++#define CFG_MCMEM0_VAL 0x00010204 ++#define CFG_MCMEM1_VAL 0x00010204 ++#define CFG_MCATT0_VAL 0x00010204 ++#define CFG_MCATT1_VAL 0x00010204 ++#define CFG_MCIO0_VAL 0x0000c108 ++#define CFG_MCIO1_VAL 0x0001c108 ++ ++//#define CONFIG_PXA_PCMCIA 1 ++//#define CONFIG_PXA_IDE 1 ++ ++#define CONFIG_PCMCIA_SLOT_A 1 ++/* just to keep build system happy */ ++ ++#define CFG_PCMCIA_MEM_ADDR 0x28000000 ++#define CFG_PCMCIA_MEM_SIZE 0x04000000 ++ ++#define CFG_IDE_MAXBUS 1 ++/* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 ++/* max. 1 drive per IDE bus */ ++ ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++ ++#define CFG_ATA_BASE_ADDR 0x20000000 ++ ++/* Offset for data I/O */ ++#define CFG_ATA_DATA_OFFSET 0x1f0 ++ ++/* Offset for normal register accesses */ ++#define CFG_ATA_REG_OFFSET 0x1f0 ++ ++/* Offset for alternate registers */ ++#define CFG_ATA_ALT_OFFSET 0x3f0 ++ ++#define CFG_NO_FLASH 1 ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ ++ ++/*----------------------------------------------------------------------- ++ * NAND-FLASH stuff ++ *----------------------------------------------------------------------- ++ */ ++#undef CFG_NAND_LEGACY ++ ++/* NAND debugging */ ++//#define CONFIG_MTD_DEBUG ++//#define CONFIG_MTD_DEBUG_VERBOSE 3 ++ ++#define CFG_NAND_BASE 0xd4000000 ++#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define NAND_MAX_CHIPS 1 ++ ++//#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ ++//#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ ++ ++#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ ++#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ ++ ++/* ++ * JFFS2 partitions ++ * ++ */ ++/* No command line, one static partition */ ++//#undef CONFIG_JFFS2_CMDLINE ++//#define CONFIG_JFFS2_DEV "nand0" ++//#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF ++//#define CONFIG_JFFS2_PART_OFFSET 0x00060000 ++ ++/* mtdparts command line support */ ++/* Note: fake mtd_id used, no linux mtd map file */ ++ ++#define CONFIG_JFFS2_CMDLINE ++#define MTDIDS_DEFAULT "nand0=laze-0" ++//#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" ++#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++ ++/* ++ * SHARP SL NAND logical partition ++ */ ++#define NAND_LOGICAL 1 ++#define NAND_LOGICAL_SIZE 0x700000 ++ ++/* ++ * Environment ++ */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x40000 ++//#define CFG_ENV_OFFSET_REDUND 0x44000 ++#define CFG_ENV_SIZE 0x20000 ++ ++#endif /* __CONFIG_H */ +diff -Nur u-boot-2006-04-18-1106/include/configs/corgi.h u-boot-2006-04-18-1106-new/include/configs/corgi.h +--- u-boot-2006-04-18-1106/include/configs/corgi.h 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/include/configs/corgi.h 2006-07-13 11:19:04.000000000 +0000 +@@ -0,0 +1,326 @@ ++/* ++ * include/configs/corgi.h ++ * ++ * Configuration settings for the Sharp Zaurus SL-C7x0/C860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++ ++#undef SKIP_CONFIG_RELOCATE_UBOOT ++ ++#undef CONFIG_HARD_I2C ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_PXA250 1 /* This is an PXA255 CPU */ ++#define CONFIG_CORGI 1 /* on Sharp Zaurus Corgi */ ++//#define CONFIG_MMC 1 ++#define BOARD_LATE_INIT 1 ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define RTC 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++//#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_FFUART 1 /* we use FFUART on Mainstone */ ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_BAUDRATE 115200 ++//#define CONFIG_DOS_PARTITION 1 ++ ++#undef CONFIG_SHOW_BOOT_PROGRESS ++ ++#if 1 ++#define CONFIG_BOOTDELAY 1 ++#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds\n" ++ ++#define CONFIG_BOOTCOMMAND \ ++ "if testkey 101 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x00060000 0x00540000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 2 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 18 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 3 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " \ ++ "bootm; " ++#else ++#define CONFIG_BOOTCOMMAND "" // "run boot_flash" ++#endif ++ ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192" ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_COMMANDS (( \ ++ CONFIG_CMD_DFL | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_JFFS2 \ ++ ) & ~( \ ++ CFG_CMD_NET | \ ++ CFG_CMD_FLASH | \ ++ CFG_CMD_IMLS \ ++ )) ++ ++// CFG_CMD_ENV ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_HUSH_PARSER 1 ++#define CFG_PROMPT_HUSH_PS2 "> " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_DEVICE_NULLDEV 1 ++ ++#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0xa0800000 /* default load address */ ++ ++#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ ++#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ ++ ++ /* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_MMC_BASE 0xF0000000 ++ ++/* ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ ++#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ ++#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ ++#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ ++#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ ++ ++#define PHYS_FLASH_1 0xd4000000 /* Flash Bank #1 */ ++ ++#define CFG_DRAM_BASE 0xa0000000 ++#define CFG_DRAM_SIZE 0x04000000 ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/* ++ * GPIO settings for Mainstone ++ */ ++ ++#define CFG_GPSR0_VAL 0x00708800 ++#define CFG_GPSR1_VAL 0x03cf0002 ++#define CFG_GPSR2_VAL 0x0021FC00 ++#define CFG_GPSR3_VAL 0x00000000 ++ ++#define CFG_GPCR0_VAL 0x00001000 ++#define CFG_GPCR1_VAL 0x00000000 ++#define CFG_GPCR2_VAL 0x00000000 ++#define CFG_GPCR3_VAL 0x00000000 ++ ++#define CFG_GPDR0_VAL 0xC27B9C04 ++#define CFG_GPDR1_VAL 0x00EFAA83 ++#define CFG_GPDR2_VAL 0x0E23FC00 ++#define CFG_GPDR3_VAL 0x001E1F81 ++ ++#define CFG_GAFR0_L_VAL 0x94F00000 ++#define CFG_GAFR0_U_VAL 0x015A859A ++#define CFG_GAFR1_L_VAL 0x999A955A ++#define CFG_GAFR1_U_VAL 0x0005A4AA ++#define CFG_GAFR2_L_VAL 0x6AA00000 ++#define CFG_GAFR2_U_VAL 0x55A8041A ++#define CFG_GAFR3_L_VAL 0x56AA955A ++#define CFG_GAFR3_U_VAL 0x00000001 ++ ++#define CFG_PSSR_VAL 0x20 // ??????????? ++ ++/* ++ * PCMCIA and CF Interfaces ++ */ ++#define CFG_MECR_VAL 0x00000001 ++#define CFG_MCMEM0_VAL 0x00010204 ++#define CFG_MCMEM1_VAL 0x00010204 ++#define CFG_MCATT0_VAL 0x00010204 ++#define CFG_MCATT1_VAL 0x00010204 ++#define CFG_MCIO0_VAL 0x0000c108 ++#define CFG_MCIO1_VAL 0x0001c108 ++ ++//#define CONFIG_PXA_PCMCIA 1 ++//#define CONFIG_PXA_IDE 1 ++ ++#define CONFIG_PCMCIA_SLOT_A 1 ++/* just to keep build system happy */ ++ ++#define CFG_PCMCIA_MEM_ADDR 0x28000000 ++#define CFG_PCMCIA_MEM_SIZE 0x04000000 ++ ++#define CFG_IDE_MAXBUS 1 ++/* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 ++/* max. 1 drive per IDE bus */ ++ ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++ ++#define CFG_ATA_BASE_ADDR 0x20000000 ++ ++/* Offset for data I/O */ ++#define CFG_ATA_DATA_OFFSET 0x1f0 ++ ++/* Offset for normal register accesses */ ++#define CFG_ATA_REG_OFFSET 0x1f0 ++ ++/* Offset for alternate registers */ ++#define CFG_ATA_ALT_OFFSET 0x3f0 ++ ++#define CFG_NO_FLASH 1 ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ ++ ++/*----------------------------------------------------------------------- ++ * NAND-FLASH stuff ++ *----------------------------------------------------------------------- ++ */ ++#undef CFG_NAND_LEGACY ++ ++/* NAND debugging */ ++//#define CONFIG_MTD_DEBUG ++//#define CONFIG_MTD_DEBUG_VERBOSE 3 ++ ++#define CFG_NAND_BASE 0xd4000000 ++#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define NAND_MAX_CHIPS 1 ++ ++//#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ ++//#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ ++ ++#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ ++#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ ++ ++#define NAND_ALLOW_ERASE_ALL 1 ++ ++/* ++ * JFFS2 partitions ++ * ++ */ ++/* No command line, one static partition */ ++//#undef CONFIG_JFFS2_CMDLINE ++//#define CONFIG_JFFS2_DEV "nand0" ++//#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF ++//#define CONFIG_JFFS2_PART_OFFSET 0x00060000 ++ ++/* mtdparts command line support */ ++/* Note: fake mtd_id used, no linux mtd map file */ ++ ++#define CONFIG_JFFS2_CMDLINE ++#define MTDIDS_DEFAULT "nand0=laze-0" ++//#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" ++#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++ ++/* ++ * SHARP SL NAND logical partition ++ */ ++#define NAND_LOGICAL 1 ++#define NAND_LOGICAL_SIZE 0x700000 ++ ++/* ++ * Environment ++ */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x40000 ++//#define CFG_ENV_OFFSET_REDUND 0x44000 ++#define CFG_ENV_SIZE 0x20000 ++ ++#endif /* __CONFIG_H */ +--- s/examples/Makefile.orig 2006-12-09 15:08:45.000000000 +0600 ++++ s/examples/Makefile 2006-12-09 15:09:00.000000000 +0600 +@@ -60,7 +60,7 @@ + include $(TOPDIR)/config.mk + + SREC = hello_world.srec +-BIN = hello_world.bin hello_world ++BIN = hello_world hello_world.bin + + ifeq ($(CPU),mpc8xx) + SREC = test_burst.srec +@@ -122,7 +122,7 @@ + + CPPFLAGS += -I.. + +-all: .depend $(OBJS) $(LIB) $(SREC) $(BIN) ++all: .depend $(OBJS) $(LIB) $(BIN) $(SREC) + + ######################################################################### + $(LIB): .depend $(LIBOBJS) +diff -Nur u-boot-2006-04-18-1106/CREDITS u-boot-2006-04-18-1106-new/CREDITS +--- u-boot-2006-04-18-1106/CREDITS 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/CREDITS 2006-07-05 11:19:44.000000000 +0000 +@@ -93,6 +93,12 @@ + E: jonathan.debruyne@siemens.atea.be + D: Port to Siemens IAD210 board + ++N: Alexander Chukov ++E: sash@pdaXrom.org ++D: initial support for Sharp Zaurus SL-C1000/3100 ++D: initial support for Sharp Zaurus SL-C7x0/C860 ++W: http://www.pdaXrom.org ++ + N: Ken Chou + E: kchou@ieee.org + D: Support for A3000 SBC board +diff -Nur u-boot-2006-04-18-1106/MAINTAINERS u-boot-2006-04-18-1106-new/MAINTAINERS +--- u-boot-2006-04-18-1106/MAINTAINERS 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/MAINTAINERS 2006-07-05 11:19:44.000000000 +0000 +@@ -379,6 +379,11 @@ + + AT91RM9200DK at91rm9200 + ++Alexander Chukov <sash@pdaXrom.org> ++ ++ akita xscale ++ corgi xscale ++ + George G. Davis <gdavis@mvista.com> + + assabet SA1100 +diff -Nur u-boot-2006-04-18-1106/MAKEALL u-boot-2006-04-18-1106-new/MAKEALL +--- u-boot-2006-04-18-1106/MAKEALL 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/MAKEALL 2006-07-05 11:19:44.000000000 +0000 +@@ -206,7 +206,7 @@ + adsvix cerf250 cradle csb226 \ + delta innokom lubbock pxa255_idp \ + wepep250 xaeniax xm250 xsengine \ +- zylonite \ ++ zylonite akita corgi \ + " + + LIST_ixp="ixdp425" +diff -Nur u-boot-2006-04-18-1106/Makefile u-boot-2006-04-18-1106-new/Makefile +--- u-boot-2006-04-18-1106/Makefile 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/Makefile 2006-07-05 11:19:44.000000000 +0000 +@@ -61,7 +61,7 @@ + CROSS_COMPILE = powerpc-linux- + endif + ifeq ($(ARCH),arm) +-CROSS_COMPILE = arm-linux- ++CROSS_COMPILE = armv5tel-linux- + endif + ifeq ($(ARCH),i386) + ifeq ($(HOSTARCH),i386) +@@ -1709,6 +1709,12 @@ + zylonite_config : + @./mkconfig $(@:_config=) arm pxa zylonite + ++akita_config : unconfig ++ @./mkconfig $(@:_config=) arm pxa akita ++ ++corgi_config : unconfig ++ @./mkconfig $(@:_config=) arm pxa corgi ++ + ######################################################################### + ## ARM1136 Systems + ######################################################################### +diff -Nur u-boot-2006-04-18-1106/README u-boot-2006-04-18-1106-new/README +--- u-boot-2006-04-18-1106/README 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/README 2006-07-05 11:19:44.000000000 +0000 +@@ -311,7 +311,8 @@ + CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400, + CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, + CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, +- CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 ++ CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9, ++ CONFIG_AKITA, CONFIG_CORGI + + MicroBlaze based boards: + ------------------------ +diff -Nur u-boot-2006-04-18-1106/board/akita/Makefile u-boot-2006-04-18-1106-new/board/akita/Makefile +--- u-boot-2006-04-18-1106/board/akita/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/Makefile 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,51 @@ ++# ++# board/akita/Makefile ++# ++# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++# ++# (C) Copyright 2000 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := akita.o nand.o kbd.o ++SOBJS := lowlevel_init.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +diff -Nur u-boot-2006-04-18-1106/board/akita/akita.c u-boot-2006-04-18-1106-new/board/akita/akita.c +--- u-boot-2006-04-18-1106/board/akita/akita.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/akita.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,89 @@ ++/* ++ * board/akita/akita.c ++ * ++ * Configuration settings for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++void set_turbo_mode(void); ++ ++/* ------------------------------------------------------------------------- */ ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* memory and cpu-speed are setup before relocation */ ++ /* so we do _nothing_ here */ ++ ++ /* arch number of Sharp Zaurus Akita : MACH_TYPE_AKITA */ ++ gd->bd->bi_arch_number = 744; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0xa0000100; ++ ++ /* set cpu turbo mode */ ++ set_turbo_mode(); ++ ++ spitzkbd_init(); ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ setenv("stdout", "serial"); ++ setenv("stderr", "serial"); ++ return 0; ++} ++ ++ ++int dram_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ gd->bd->bi_dram[1].start = PHYS_SDRAM_2; ++ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; ++ gd->bd->bi_dram[2].start = PHYS_SDRAM_3; ++ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; ++ gd->bd->bi_dram[3].start = PHYS_SDRAM_4; ++ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; ++ ++ return 0; ++} +diff -Nur u-boot-2006-04-18-1106/board/akita/config.mk u-boot-2006-04-18-1106-new/board/akita/config.mk +--- u-boot-2006-04-18-1106/board/akita/config.mk 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/config.mk 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1 @@ ++TEXT_BASE = 0xa3000000 +diff -Nur u-boot-2006-04-18-1106/board/akita/kbd.c u-boot-2006-04-18-1106-new/board/akita/kbd.c +--- u-boot-2006-04-18-1106/board/akita/kbd.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/kbd.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,261 @@ ++/* ++ * board/akita/kbd.c ++ * ++ * Keyboard driver for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from: ++ * ++ * linux/drivers/input/keyboard/spitzkbd.c ++ * ++ * Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series) ++ * ++ * Copyright (C) 2005 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <command.h> ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++#define GPIO_DFLT_LOW 0x400 ++#define GPIO_DFLT_HIGH 0x800 ++ ++void pxa_gpio_mode(int gpio_mode) ++{ ++ int gpio = gpio_mode & GPIO_MD_MASK_NR; ++ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; ++ int gafr; ++ ++ if (gpio_mode & GPIO_DFLT_LOW) ++ GPCR(gpio) = GPIO_bit(gpio); ++ else if (gpio_mode & GPIO_DFLT_HIGH) ++ GPSR(gpio) = GPIO_bit(gpio); ++ if (gpio_mode & GPIO_MD_MASK_DIR) ++ GPDR(gpio) |= GPIO_bit(gpio); ++ else ++ GPDR(gpio) &= ~GPIO_bit(gpio); ++ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); ++ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); ++} ++ ++#define SPITZ_KEY_STROBE_NUM (11) ++#define SPITZ_KEY_SENSE_NUM (7) ++ ++#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 ++#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 ++#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 ++#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 ++#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 ++#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 ++#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 ++#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 ++ ++#define SPITZ_GPIO_KEY_STROBE0 88 ++#define SPITZ_GPIO_KEY_STROBE1 23 ++#define SPITZ_GPIO_KEY_STROBE2 24 ++#define SPITZ_GPIO_KEY_STROBE3 25 ++#define SPITZ_GPIO_KEY_STROBE4 26 ++#define SPITZ_GPIO_KEY_STROBE5 27 ++#define SPITZ_GPIO_KEY_STROBE6 52 ++#define SPITZ_GPIO_KEY_STROBE7 103 ++#define SPITZ_GPIO_KEY_STROBE8 107 ++#define SPITZ_GPIO_KEY_STROBE9 108 ++#define SPITZ_GPIO_KEY_STROBE10 114 ++ ++#define SPITZ_GPIO_KEY_SENSE0 12 ++#define SPITZ_GPIO_KEY_SENSE1 17 ++#define SPITZ_GPIO_KEY_SENSE2 91 ++#define SPITZ_GPIO_KEY_SENSE3 34 ++#define SPITZ_GPIO_KEY_SENSE4 36 ++#define SPITZ_GPIO_KEY_SENSE5 38 ++#define SPITZ_GPIO_KEY_SENSE6 39 ++ ++#define SPITZ_GPIO_ON_KEY (95) ++ ++#define KB_ROWS 7 ++#define KB_COLS 11 ++#define KB_ROWMASK(r) (1 << (r)) ++#define SCANCODE(r,c) (((r)<<4) + (c) + 1) ++#define NR_SCANCODES ((KB_ROWS<<4) + 1) ++ ++#define SCAN_INTERVAL (50) /* ms */ ++#define HINGE_SCAN_INTERVAL (150) /* ms */ ++ ++#define KB_DISCHARGE_DELAY 10 ++#define KB_ACTIVATE_DELAY 10 ++ ++static int spitz_strobes[] = { ++ SPITZ_GPIO_KEY_STROBE0, ++ SPITZ_GPIO_KEY_STROBE1, ++ SPITZ_GPIO_KEY_STROBE2, ++ SPITZ_GPIO_KEY_STROBE3, ++ SPITZ_GPIO_KEY_STROBE4, ++ SPITZ_GPIO_KEY_STROBE5, ++ SPITZ_GPIO_KEY_STROBE6, ++ SPITZ_GPIO_KEY_STROBE7, ++ SPITZ_GPIO_KEY_STROBE8, ++ SPITZ_GPIO_KEY_STROBE9, ++ SPITZ_GPIO_KEY_STROBE10, ++}; ++ ++static int spitz_senses[] = { ++ SPITZ_GPIO_KEY_SENSE0, ++ SPITZ_GPIO_KEY_SENSE1, ++ SPITZ_GPIO_KEY_SENSE2, ++ SPITZ_GPIO_KEY_SENSE3, ++ SPITZ_GPIO_KEY_SENSE4, ++ SPITZ_GPIO_KEY_SENSE5, ++ SPITZ_GPIO_KEY_SENSE6, ++}; ++ ++static inline void spitzkbd_discharge_all(void) ++{ ++ /* STROBE All HiZ */ ++ GPCR0 = SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; ++ GPCR1 = SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; ++ GPCR2 = SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; ++ GPCR3 = SPITZ_GPIO_G3_STROBE_BIT; ++ GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; ++} ++ ++static inline void spitzkbd_activate_all(void) ++{ ++ /* STROBE ALL -> High */ ++ GPSR0 = SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR0 |= SPITZ_GPIO_G0_STROBE_BIT; ++ GPSR1 = SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR1 |= SPITZ_GPIO_G1_STROBE_BIT; ++ GPSR2 = SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR2 |= SPITZ_GPIO_G2_STROBE_BIT; ++ GPSR3 = SPITZ_GPIO_G3_STROBE_BIT; ++ GPDR3 |= SPITZ_GPIO_G3_STROBE_BIT; ++ ++ udelay(KB_DISCHARGE_DELAY); ++} ++ ++static inline void spitzkbd_activate_col(int col) ++{ ++ int gpio = spitz_strobes[col]; ++ GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; ++ GPSR(gpio) = GPIO_bit(gpio); ++ GPDR(gpio) |= GPIO_bit(gpio); ++} ++ ++static inline void spitzkbd_reset_col(int col) ++{ ++ int gpio = spitz_strobes[col]; ++ GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; ++ GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; ++ GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; ++ GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; ++ GPCR(gpio) = GPIO_bit(gpio); ++ GPDR(gpio) |= GPIO_bit(gpio); ++} ++ ++static inline int spitzkbd_get_row_status(int col) ++{ ++ return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02) ++ | ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08) ++ | ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60); ++} ++ ++static int spitzkbd_scankeyboard(void) ++{ ++ unsigned int row, col, rowd; ++ unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0); ++ int ret = -1; ++ ++ num_pressed = 0; ++ for (col = 0; col < KB_COLS; col++) { ++ spitzkbd_discharge_all(); ++ udelay(KB_DISCHARGE_DELAY); ++ ++ spitzkbd_activate_col(col); ++ udelay(KB_ACTIVATE_DELAY); ++ ++ rowd = spitzkbd_get_row_status(col); ++ for (row = 0; row < KB_ROWS; row++) { ++ unsigned int scancode, pressed; ++ ++ scancode = SCANCODE(row, col); ++ pressed = rowd & KB_ROWMASK(row); ++ ++ if (pressed) ++ ret = scancode; ++ } ++ spitzkbd_reset_col(col); ++ } ++ ++ spitzkbd_activate_all(); ++ ++ if (pwrkey) ++ return -2; ++ ++ return ret; ++} ++ ++void spitzkbd_init(void) ++{ ++ int i; ++ ++ /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ ++ for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) ++ pxa_gpio_mode(spitz_senses[i] | GPIO_IN); ++ ++ /* Set Strobe lines as outputs - set high */ ++ for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) ++ pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); ++ ++ pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN); ++} ++ ++int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int scan; ++ ++ if (argc < 2) ++ return 1; ++ ++ scan = spitzkbd_scankeyboard(); ++ ++ ++// if (scan >= 0) ++// printf("Scan = %d\n", scan); ++// else ++// printf("Nothing!\n"); ++ ++ return !(simple_strtol(argv[1], NULL, 10) == scan); ++} ++ ++U_BOOT_CMD( ++ testkey, 2, 1, do_testkey, ++ "testkey - compare pressed key with arg\n", ++ "<key scancode>" ++); +diff -Nur u-boot-2006-04-18-1106/board/akita/lowlevel_init.S u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S +--- u-boot-2006-04-18-1106/board/akita/lowlevel_init.S 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/lowlevel_init.S 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,135 @@ ++/* ++ * board/akita/lowlevel_init.S ++ * ++ * Configuration settings for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * This was originally from the Lubbock u-boot port and from BLOB with cleanup ++ * ++ * NOTE: I haven't clean this up considerably, just enough to get it ++ * running. See hal_platform_setup.h for the source. See ++ * board/cradle/lowlevel_init.S for another PXA250 setup that is ++ * much cleaner. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++/* wait for coprocessor write complete */ ++ .macro CPWAIT reg ++ mrc p15,0,\reg,c2,c0,0 ++ mov \reg,\reg ++ sub pc,pc,#4 ++ .endm ++ ++/*********** Write out to HEX 7 segment leds *********/ ++ ++#undef DEBUG_HEXLOG ++ ++#ifdef DEBUG_HEXLOG ++#define LEDCTL 0x08000040 ++#define LEDDAT1 0x08000010 ++#define LEDDAT2 0x08000014 ++ ++.macro wait, count ++ mov r10, \count ++0: ++ subs r10, r10, #1 ++ bne 0b ++.endm ++ ++.macro hexlog_init ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ldr r11, =LEDDAT1 ++ mov r10, #0x0 ++ str r10, [r11] ++.endm ++ ++.macro hexlog, val ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ++ ldr r11, =LEDDAT1 ++ mov r10, \val ++ str r10, [r11] ++ ++ wait #0x400000 ++.endm ++ ++#else ++ ++.macro hexlog_init ++ nop ++.endm ++ ++.macro hexlog, val ++ nop ++.endm ++ ++#endif ++ ++/***********************************/ ++ ++/* ++ * Memory setup ++ */ ++ ++.globl lowlevel_init ++lowlevel_init: ++ ++ mov pc, lr ++ ++.globl set_turbo_mode ++ ++set_turbo_mode: ++ /* Turn on turbo mode */ ++ mrc p14, 0, r2, c6, c0, 0 ++ orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ ++ mcr p14, 0, r2, c6, c0, 0 ++ ++ /* Setup vectors */ ++ ldr r0, =TEXT_BASE ++ ldr r1, =TEXT_BASE+0x40 ++ ldr r2, =0x0 ++1: ++ ldr r3, [r0] ++ str r3, [r2] ++ add r0, r0, #4 ++ add r2, r2, #4 ++ cmp r0, r1 ++ bne 1b ++ ++ ldr r0, =0x0 ++ ldr r1, [r0, #4] ++ str r1, [r0] ++ ++ mov pc, lr +diff -Nur u-boot-2006-04-18-1106/board/akita/nand.c u-boot-2006-04-18-1106-new/board/akita/nand.c +--- u-boot-2006-04-18-1106/board/akita/nand.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/nand.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,169 @@ ++/* ++ * board/akita/nand.c ++ * ++ * NAND driver for the Sharp Zaurus SL-Cxx00. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from mtd nand driver: ++ * ++ * drivers/mtd/nand/sharpsl.c ++ * ++ * Copyright (C) 2004 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) ++ ++#include <nand.h> ++#include <linux/mtd/nand_ecc.h> ++ ++static int sharpsl_io_base = CFG_NAND_BASE; ++ ++/* register offset */ ++#define ECCLPLB sharpsl_io_base+0x00 /* line parity 7 - 0 bit */ ++#define ECCLPUB sharpsl_io_base+0x04 /* line parity 15 - 8 bit */ ++#define ECCCP sharpsl_io_base+0x08 /* column parity 5 - 0 bit */ ++#define ECCCNTR sharpsl_io_base+0x0C /* ECC byte counter */ ++#define ECCCLRR sharpsl_io_base+0x10 /* cleare ECC */ ++#define FLASHIO sharpsl_io_base+0x14 /* Flash I/O */ ++#define FLASHCTL sharpsl_io_base+0x18 /* Flash Control */ ++ ++/* Flash control bit */ ++#define FLRYBY (1 << 5) ++#define FLCE1 (1 << 4) ++#define FLWP (1 << 3) ++#define FLALE (1 << 2) ++#define FLCLE (1 << 1) ++#define FLCE0 (1 << 0) ++ ++#define readb(address) *((volatile unsigned char *)(address)) ++#define writeb(v, address) *((volatile unsigned char *)(address))=v ++ ++/* ++ * hardware specific access to control-lines ++ */ ++static void ++sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd) ++{ ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ writeb(readb(FLASHCTL) | FLCLE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRCLE: ++ writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETALE: ++ writeb(readb(FLASHCTL) | FLALE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRALE: ++ writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETNCE: ++ writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL); ++ break; ++ case NAND_CTL_CLRNCE: ++ writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL); ++ break; ++ } ++} ++ ++static int ++sharpsl_nand_dev_ready(struct mtd_info* mtd) ++{ ++ return !((readb(FLASHCTL) & FLRYBY) == 0); ++} ++ ++static void ++sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode) ++{ ++ writeb(0 ,ECCCLRR); ++} ++ ++static int ++sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat, ++ u_char* ecc_code) ++{ ++ ecc_code[0] = ~readb(ECCLPUB); ++ ecc_code[1] = ~readb(ECCLPLB); ++ ecc_code[2] = (~readb(ECCCP) << 2) | 0x03; ++ return readb(ECCCNTR) != 0; ++} ++ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++ ++static struct nand_bbt_descr sharpsl_akita_bbt = { ++ .options = 0, ++ .offs = 4, ++ .len = 1, ++ .pattern = scan_ff_pattern ++}; ++ ++static struct nand_oobinfo akita_oobinfo = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 24, ++ .eccpos = { ++ 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, ++ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, ++ 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, ++ .oobfree = { {0x08, 0x09} } ++}; ++ ++/* ++ * Board-specific NAND initialization. The following members of the ++ * argument are board-specific (per include/linux/mtd/nand.h): ++ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device ++ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device ++ * - hwcontrol: hardwarespecific function for accesing control-lines ++ * - dev_ready: hardwarespecific function for accesing device ready/busy line ++ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must ++ * only be provided if a hardware ECC is available ++ * - eccmode: mode of ecc, see defines ++ * - chip_delay: chip dependent delay for transfering data from array to ++ * read regs (tR) ++ * - options: various chip options. They can partly be set to inform ++ * nand_scan about special functionality. See the defines for further ++ * explanation ++ * Members with a "?" were not set in the merged testing-NAND branch, ++ * so they are not set here either. ++ */ ++void board_nand_init(struct nand_chip *nand) ++{ ++ writeb(readb(FLASHCTL) | FLWP, FLASHCTL); ++ ++ nand->IO_ADDR_R = FLASHIO; ++ nand->IO_ADDR_W = FLASHIO; ++ nand->hwcontrol = sharpsl_nand_hwcontrol; ++ nand->dev_ready = sharpsl_nand_dev_ready; ++ nand->eccmode = NAND_ECC_HW3_256; ++ nand->chip_delay = 15; ++ nand->options = NAND_SAMSUNG_LP_OPTIONS; ++ nand->badblock_pattern = &sharpsl_akita_bbt; ++ nand->autooob = &akita_oobinfo; ++ nand->enable_hwecc = sharpsl_nand_enable_hwecc; ++ nand->calculate_ecc = sharpsl_nand_calculate_ecc; ++ nand->correct_data = nand_correct_data; ++} ++#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ +diff -Nur u-boot-2006-04-18-1106/board/akita/u-boot.lds u-boot-2006-04-18-1106-new/board/akita/u-boot.lds +--- u-boot-2006-04-18-1106/board/akita/u-boot.lds 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/akita/u-boot.lds 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/pxa/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +diff -Nur u-boot-2006-04-18-1106/board/corgi/Makefile u-boot-2006-04-18-1106-new/board/corgi/Makefile +--- u-boot-2006-04-18-1106/board/corgi/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/Makefile 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,51 @@ ++# ++# board/corgi/Makefile ++# ++# (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++# ++# (C) Copyright 2000 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := corgi.o nand.o kbd.o ++SOBJS := lowlevel_init.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +diff -Nur u-boot-2006-04-18-1106/board/corgi/config.mk u-boot-2006-04-18-1106-new/board/corgi/config.mk +--- u-boot-2006-04-18-1106/board/corgi/config.mk 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/config.mk 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1 @@ ++TEXT_BASE = 0xa1000000 +diff -Nur u-boot-2006-04-18-1106/board/corgi/corgi.c u-boot-2006-04-18-1106-new/board/corgi/corgi.c +--- u-boot-2006-04-18-1106/board/corgi/corgi.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/corgi.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,87 @@ ++/* ++ * board/corgi/corgi.c ++ * ++ * Configuration settings for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++/* ------------------------------------------------------------------------- */ ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ /* memory and cpu-speed are setup before relocation */ ++ /* so we do _nothing_ here */ ++ ++ /* arch number of Sharp Zaurus Corgi : MACH_TYPE_CORGI */ ++ gd->bd->bi_arch_number = 423; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0xa0000100; ++ ++ /* set cpu turbo mode */ ++ set_turbo_mode(); ++ ++ corgikbd_init(); ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ setenv("stdout", "serial"); ++ setenv("stderr", "serial"); ++ return 0; ++} ++ ++ ++int dram_init (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ gd->bd->bi_dram[1].start = PHYS_SDRAM_2; ++ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; ++ gd->bd->bi_dram[2].start = PHYS_SDRAM_3; ++ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; ++ gd->bd->bi_dram[3].start = PHYS_SDRAM_4; ++ gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; ++ ++ return 0; ++} +diff -Nur u-boot-2006-04-18-1106/board/corgi/kbd.c u-boot-2006-04-18-1106-new/board/corgi/kbd.c +--- u-boot-2006-04-18-1106/board/corgi/kbd.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/kbd.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,202 @@ ++/* ++ * board/corgi/kbd.c ++ * ++ * Keyboard driver for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from: ++ * ++ * linux/drivers/input/keyboard/spitzkbd.c ++ * ++ * Keyboard driver for Sharp Corgi models (SL-C7xx) ++ * ++ * Copyright (C) 2005 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <command.h> ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++#define GPIO_DFLT_LOW 0x400 ++#define GPIO_DFLT_HIGH 0x800 ++ ++void pxa_gpio_mode(int gpio_mode) ++{ ++ int gpio = gpio_mode & GPIO_MD_MASK_NR; ++ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; ++ int gafr; ++ ++ if (gpio_mode & GPIO_DFLT_LOW) ++ GPCR(gpio) = GPIO_bit(gpio); ++ else if (gpio_mode & GPIO_DFLT_HIGH) ++ GPSR(gpio) = GPIO_bit(gpio); ++ if (gpio_mode & GPIO_MD_MASK_DIR) ++ GPDR(gpio) |= GPIO_bit(gpio); ++ else ++ GPDR(gpio) &= ~GPIO_bit(gpio); ++ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); ++ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); ++} ++ ++/* ++ * Corgi Keyboard Definitions ++ */ ++#define CORGI_KEY_STROBE_NUM (12) ++#define CORGI_KEY_SENSE_NUM (8) ++#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc) ++#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000) ++#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26) ++#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003) ++#define CORGI_GPIO_LOW_SENSE_LSHIFT (6) ++#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a)) ++#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a)) ++#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0) ++#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000) ++#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f) ++#define CORGI_GPIO_KEY_SENSE(a) (58+(a)) ++#define CORGI_GPIO_KEY_STROBE(a) (66+(a)) ++ ++#define CORGI_GPIO_AK_INT (4) /* Headphone Jack Control Interrupt */ ++ ++#define KB_ROWS 8 ++#define KB_COLS 12 ++#define KB_ROWMASK(r) (1 << (r)) ++#define SCANCODE(r,c) ( ((r)<<4) + (c) + 1 ) ++/* zero code, 124 scancodes */ ++#define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 ) ++ ++#define SCAN_INTERVAL (50) /* ms */ ++#define HINGE_SCAN_INTERVAL (250) /* ms */ ++ ++#define KB_DISCHARGE_DELAY 10 ++#define KB_ACTIVATE_DELAY 10 ++ ++static inline void corgikbd_discharge_all(void) ++{ ++ /* STROBE All HiZ */ ++ GPCR2 = CORGI_GPIO_ALL_STROBE_BIT; ++ GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT; ++} ++ ++static inline void corgikbd_activate_all(void) ++{ ++ /* STROBE ALL -> High */ ++ GPSR2 = CORGI_GPIO_ALL_STROBE_BIT; ++ GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT; ++ ++ udelay(KB_DISCHARGE_DELAY); ++ ++ /* Clear any interrupts we may have triggered when altering the GPIO lines */ ++ GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT; ++ GEDR2 = CORGI_GPIO_LOW_SENSE_BIT; ++} ++ ++static inline void corgikbd_activate_col(int col) ++{ ++ /* STROBE col -> High, not col -> HiZ */ ++ GPSR2 = CORGI_GPIO_STROBE_BIT(col); ++ GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); ++} ++ ++static inline void corgikbd_reset_col(int col) ++{ ++ /* STROBE col -> Low */ ++ GPCR2 = CORGI_GPIO_STROBE_BIT(col); ++ /* STROBE col -> out, not col -> HiZ */ ++ GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); ++} ++ ++#define GET_ROWS_STATUS(c) (((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT)) ++ ++static int corgikbd_scankeyboard(void) ++{ ++ unsigned int row, col, rowd; ++ unsigned int num_pressed; ++ int ret = -1; ++ ++ num_pressed = 0; ++ for (col = 0; col < KB_COLS; col++) { ++ corgikbd_discharge_all(); ++ udelay(KB_DISCHARGE_DELAY); ++ ++ corgikbd_activate_col(col); ++ udelay(KB_ACTIVATE_DELAY); ++ ++ rowd = GET_ROWS_STATUS(col); ++ for (row = 0; row < KB_ROWS; row++) { ++ unsigned int scancode, pressed; ++ ++ scancode = SCANCODE(row, col); ++ pressed = rowd & KB_ROWMASK(row); ++ ++ if (pressed) ++ ret = scancode; ++ } ++ corgikbd_reset_col(col); ++ } ++ ++ corgikbd_activate_all(); ++ ++ return ret; ++} ++ ++void corgikbd_init(void) ++{ ++ int i; ++ ++ /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ ++ for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) ++ pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN); ++ ++ /* Set Strobe lines as outputs - set high */ ++ for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) ++ pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); ++ ++ /* Setup the headphone jack as an input */ ++ pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN); ++} ++ ++int do_testkey(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int scan; ++ ++ if (argc < 2) ++ return 1; ++ ++ scan = corgikbd_scankeyboard(); ++ ++ ++// if (scan >= 0) ++// printf("Scan = %d\n", scan); ++// else ++// printf("Nothing!\n"); ++ ++ return !(simple_strtol(argv[1], NULL, 10) == scan); ++} ++ ++U_BOOT_CMD( ++ testkey, 2, 1, do_testkey, ++ "testkey - compare pressed key with arg\n", ++ "<key scancode>" ++); +diff -Nur u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S +--- u-boot-2006-04-18-1106/board/corgi/lowlevel_init.S 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/lowlevel_init.S 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,136 @@ ++/* ++ * board/corgi/lowlevel_init.S ++ * ++ * Configuration settings for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * This was originally from the Lubbock u-boot port and from BLOB with cleanup ++ * ++ * NOTE: I haven't clean this up considerably, just enough to get it ++ * running. See hal_platform_setup.h for the source. See ++ * board/cradle/lowlevel_init.S for another PXA250 setup that is ++ * much cleaner. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <config.h> ++#include <version.h> ++#include <asm/arch/pxa-regs.h> ++ ++/* wait for coprocessor write complete */ ++ .macro CPWAIT reg ++ mrc p15,0,\reg,c2,c0,0 ++ mov \reg,\reg ++ sub pc,pc,#4 ++ .endm ++ ++/*********** Write out to HEX 7 segment leds *********/ ++ ++#undef DEBUG_HEXLOG ++ ++#ifdef DEBUG_HEXLOG ++#define LEDCTL 0x08000040 ++#define LEDDAT1 0x08000010 ++#define LEDDAT2 0x08000014 ++ ++.macro wait, count ++ mov r10, \count ++0: ++ subs r10, r10, #1 ++ bne 0b ++.endm ++ ++.macro hexlog_init ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ldr r11, =LEDDAT1 ++ mov r10, #0x0 ++ str r10, [r11] ++.endm ++ ++.macro hexlog, val ++ ldr r11, =LEDCTL ++ mov r10, #0xff ++ str r10, [r11] ++ ldr r11, =LEDDAT2 ++ mov r10, #0xFFFFFFFF ++ str r10, [r11] ++ ++ ldr r11, =LEDDAT1 ++ mov r10, \val ++ str r10, [r11] ++ ++ wait #0x400000 ++.endm ++ ++#else ++ ++.macro hexlog_init ++ nop ++.endm ++ ++.macro hexlog, val ++ nop ++.endm ++ ++#endif ++ ++/***********************************/ ++ ++/* ++ * Memory setup ++ */ ++ ++.globl lowlevel_init ++lowlevel_init: ++ ++ mov pc, lr ++ ++.globl set_turbo_mode ++ ++set_turbo_mode: ++ /* Turn on turbo mode */ ++ mrc p14, 0, r2, c6, c0, 0 ++ orr r2, r2, #0x3 /* Turbo, Freq change */ ++ mcr p14, 0, r2, c6, c0, 0 ++ ++ ++ /* Setup vectors */ ++ ldr r0, =TEXT_BASE ++ ldr r1, =TEXT_BASE+0x40 ++ ldr r2, =0x0 ++1: ++ ldr r3, [r0] ++ str r3, [r2] ++ add r0, r0, #4 ++ add r2, r2, #4 ++ cmp r0, r1 ++ bne 1b ++ ++ ldr r0, =0x0 ++ ldr r1, [r0, #4] ++ str r1, [r0] ++ ++ mov pc, lr +diff -Nur u-boot-2006-04-18-1106/board/corgi/nand.c u-boot-2006-04-18-1106-new/board/corgi/nand.c +--- u-boot-2006-04-18-1106/board/corgi/nand.c 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/nand.c 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,157 @@ ++/* ++ * board/corgi/nand.c ++ * ++ * NAND driver for the Sharp Zaurus SL-C7x0/860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from mtd nand driver: ++ * ++ * drivers/mtd/nand/sharpsl.c ++ * ++ * Copyright (C) 2004 Richard Purdie ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) ++ ++#include <nand.h> ++#include <linux/mtd/nand_ecc.h> ++ ++static int sharpsl_io_base = CFG_NAND_BASE; ++ ++/* register offset */ ++#define ECCLPLB sharpsl_io_base+0x00 /* line parity 7 - 0 bit */ ++#define ECCLPUB sharpsl_io_base+0x04 /* line parity 15 - 8 bit */ ++#define ECCCP sharpsl_io_base+0x08 /* column parity 5 - 0 bit */ ++#define ECCCNTR sharpsl_io_base+0x0C /* ECC byte counter */ ++#define ECCCLRR sharpsl_io_base+0x10 /* cleare ECC */ ++#define FLASHIO sharpsl_io_base+0x14 /* Flash I/O */ ++#define FLASHCTL sharpsl_io_base+0x18 /* Flash Control */ ++ ++/* Flash control bit */ ++#define FLRYBY (1 << 5) ++#define FLCE1 (1 << 4) ++#define FLWP (1 << 3) ++#define FLALE (1 << 2) ++#define FLCLE (1 << 1) ++#define FLCE0 (1 << 0) ++ ++#define readb(address) *((volatile unsigned char *)(address)) ++#define writeb(v, address) *((volatile unsigned char *)(address))=v ++ ++/* ++ * hardware specific access to control-lines ++ */ ++static void ++sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd) ++{ ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ writeb(readb(FLASHCTL) | FLCLE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRCLE: ++ writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETALE: ++ writeb(readb(FLASHCTL) | FLALE, FLASHCTL); ++ break; ++ case NAND_CTL_CLRALE: ++ writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL); ++ break; ++ ++ case NAND_CTL_SETNCE: ++ writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL); ++ break; ++ case NAND_CTL_CLRNCE: ++ writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL); ++ break; ++ } ++} ++ ++static int ++sharpsl_nand_dev_ready(struct mtd_info* mtd) ++{ ++ return !((readb(FLASHCTL) & FLRYBY) == 0); ++} ++ ++static void ++sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode) ++{ ++ writeb(0 ,ECCCLRR); ++} ++ ++static int ++sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat, ++ u_char* ecc_code) ++{ ++ ecc_code[0] = ~readb(ECCLPUB); ++ ecc_code[1] = ~readb(ECCLPLB); ++ ecc_code[2] = (~readb(ECCCP) << 2) | 0x03; ++ return readb(ECCCNTR) != 0; ++} ++ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++ ++static struct nand_bbt_descr sharpsl_bbt = { ++ .options = 0, ++ .offs = 4, ++ .len = 2, ++ .pattern = scan_ff_pattern ++}; ++ ++/* ++ * Board-specific NAND initialization. The following members of the ++ * argument are board-specific (per include/linux/mtd/nand.h): ++ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device ++ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device ++ * - hwcontrol: hardwarespecific function for accesing control-lines ++ * - dev_ready: hardwarespecific function for accesing device ready/busy line ++ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must ++ * only be provided if a hardware ECC is available ++ * - eccmode: mode of ecc, see defines ++ * - chip_delay: chip dependent delay for transfering data from array to ++ * read regs (tR) ++ * - options: various chip options. They can partly be set to inform ++ * nand_scan about special functionality. See the defines for further ++ * explanation ++ * Members with a "?" were not set in the merged testing-NAND branch, ++ * so they are not set here either. ++ */ ++void board_nand_init(struct nand_chip *nand) ++{ ++ writeb(readb(FLASHCTL) | FLWP, FLASHCTL); ++ ++ nand->IO_ADDR_R = FLASHIO; ++ nand->IO_ADDR_W = FLASHIO; ++ nand->hwcontrol = sharpsl_nand_hwcontrol; ++ nand->dev_ready = sharpsl_nand_dev_ready; ++ nand->eccmode = NAND_ECC_HW3_256; ++ nand->chip_delay = 15; ++ nand->badblock_pattern = &sharpsl_bbt; ++ nand->enable_hwecc = sharpsl_nand_enable_hwecc; ++ nand->calculate_ecc = sharpsl_nand_calculate_ecc; ++ nand->correct_data = nand_correct_data; ++} ++#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ +diff -Nur u-boot-2006-04-18-1106/board/corgi/u-boot.lds u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds +--- u-boot-2006-04-18-1106/board/corgi/u-boot.lds 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/board/corgi/u-boot.lds 2006-07-05 11:19:44.000000000 +0000 +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/pxa/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +diff -Nur u-boot-2006-04-18-1106/common/cmd_nand.c u-boot-2006-04-18-1106-new/common/cmd_nand.c +--- u-boot-2006-04-18-1106/common/cmd_nand.c 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/common/cmd_nand.c 2006-07-05 11:19:44.000000000 +0000 +@@ -81,6 +81,63 @@ + return 0; + } + ++#ifdef NAND_LOGICAL ++///////////////////////////////////////////////////////////////////// ++// oob structure ++///////////////////////////////////////////////////////////////////// ++ ++#define NAND_NOOB_LOGADDR_00 8 ++#define NAND_NOOB_LOGADDR_01 9 ++#define NAND_NOOB_LOGADDR_10 10 ++#define NAND_NOOB_LOGADDR_11 11 ++#define NAND_NOOB_LOGADDR_20 12 ++#define NAND_NOOB_LOGADDR_21 13 ++ ++static uint nand_get_logical_no(unsigned char *oob) ++{ ++ unsigned short us,bit; ++ int par; ++ int good0, good1; ++ ++ if(oob[NAND_NOOB_LOGADDR_00] == oob[NAND_NOOB_LOGADDR_10] && ++ oob[NAND_NOOB_LOGADDR_01] == oob[NAND_NOOB_LOGADDR_11]){ ++ good0 = NAND_NOOB_LOGADDR_00; ++ good1 = NAND_NOOB_LOGADDR_01; ++ }else ++ if(oob[NAND_NOOB_LOGADDR_10] == oob[NAND_NOOB_LOGADDR_20] && ++ oob[NAND_NOOB_LOGADDR_11] == oob[NAND_NOOB_LOGADDR_21]){ ++ good0 = NAND_NOOB_LOGADDR_10; ++ good1 = NAND_NOOB_LOGADDR_11; ++ }else ++ if(oob[NAND_NOOB_LOGADDR_20] == oob[NAND_NOOB_LOGADDR_00] && ++ oob[NAND_NOOB_LOGADDR_21] == oob[NAND_NOOB_LOGADDR_01]){ ++ good0 = NAND_NOOB_LOGADDR_20; ++ good1 = NAND_NOOB_LOGADDR_21; ++ }else{ ++ return (uint)-1; ++ } ++ ++ us = (((unsigned short)(oob[good0]) & 0x00ff) << 0) | ++ (((unsigned short)(oob[good1]) & 0x00ff) << 8); ++ ++ par = 0; ++ for(bit = 0x0001; bit != 0; bit <<= 1){ ++ if(us & bit){ ++ par++; ++ } ++ } ++ if(par & 1){ ++ return (uint)-2; ++ } ++ ++ if(us == 0xffff){ ++ return 0xffff; ++ }else{ ++ return ((us & 0x07fe) >> 1); ++ } ++} ++#endif ++ + /* ------------------------------------------------------------------------- */ + + static void +@@ -245,6 +302,55 @@ + if (off == 0 && size == 0) + return 1; + ++#ifdef NAND_LOGICAL ++ s = strchr(cmd, '.'); ++ if (s != NULL) { ++ if (strcmp(s, ".logical") == 0) { ++ int blocks = NAND_LOGICAL_SIZE / nand->erasesize; ++ ulong *log2phy = malloc(blocks * sizeof(ulong)); ++ u_char *oobuf = malloc(nand->oobblock + nand->oobsize); ++ int i; ++ ulong offset; ++ ret = 1; ++ for (i = 0; i < blocks; i++) ++ log2phy[i] = (uint) -1; ++ offset = 0; ++ for (i = 0; i < blocks; i++) { ++ ret = nand_read_raw(nand, oobuf, offset, nand->oobblock, nand->oobsize); ++ if (!ret) { ++ int log_no = nand_get_logical_no(oobuf + nand->oobblock); ++ if (((int)log_no >= 0) && (log_no < blocks)) { ++ log2phy[log_no] = offset; ++ //printf("NAND logical - %08X -> %04X\n", offset, log_no); ++ } ++ } ++ offset += nand->erasesize; ++ } ++ ++ for (i = 0; i < size / nand->erasesize; i++) { ++ ulong sz = nand->erasesize; ++ offset = log2phy[off / nand->erasesize]; ++ if ((int)offset < 0) { ++ printf("NAND logical - offset %08X not found\n", off); ++ return 1; ++ } ++ //printf("NAND logical - %04X -> %08X\n", off / nand->erasesize, offset); ++ ret = nand_read(nand, offset, &sz, (u_char *)addr); ++ if (ret) { ++ printf("NAND logical - offset %08X, read error\n", off); ++ return 1; ++ } ++ off += nand->erasesize; ++ addr += nand->erasesize; ++ } ++ printf(" %d bytes read from NAND logical\n", size); ++ free(oobuf); ++ free(log2phy); ++ return ret == 0 ? 0 : 1; ++ } ++ } ++#endif ++ + i = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ + printf("\nNAND %s: device %d offset %u, size %u ... ", + i ? "read" : "write", nand_curr_device, off, size); +diff -Nur u-boot-2006-04-18-1106/cpu/pxa/config.mk u-boot-2006-04-18-1106-new/cpu/pxa/config.mk +--- u-boot-2006-04-18-1106/cpu/pxa/config.mk 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/cpu/pxa/config.mk 2006-07-05 11:19:44.000000000 +0000 +@@ -22,8 +22,7 @@ + # MA 02111-1307 USA + # + +-PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ +- -msoft-float ++PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 -fomit-frame-pointer + + #PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100 + PLATFORM_CPPFLAGS += -march=armv5 -mtune=xscale +@@ -32,5 +31,5 @@ + # Supply options according to compiler version + # + # ======================================================================== +-PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) ++#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) + PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) +diff -Nur u-boot-2006-04-18-1106/cpu/pxa/start.S u-boot-2006-04-18-1106-new/cpu/pxa/start.S +--- u-boot-2006-04-18-1106/cpu/pxa/start.S 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/cpu/pxa/start.S 2006-07-05 11:19:44.000000000 +0000 +@@ -42,6 +42,7 @@ + ldr pc, _irq + ldr pc, _fiq + ++_reset: .word reset + _undefined_instruction: .word undefined_instruction + _software_interrupt: .word software_interrupt + _prefetch_abort: .word prefetch_abort +diff -Nur u-boot-2006-04-18-1106/fs/cramfs/cramfs.c u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c +--- u-boot-2006-04-18-1106/fs/cramfs/cramfs.c 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/fs/cramfs/cramfs.c 2006-07-05 11:19:44.000000000 +0000 +@@ -44,8 +44,13 @@ + + /* CPU address space offset calculation macro, struct part_info offset is + * device address space offset, so we need to shift it by a device start address. */ ++#if (CONFIG_COMMANDS & CFG_CMD_FLASH) + extern flash_info_t flash_info[]; + #define PART_OFFSET(x) (x->offset + flash_info[x->dev->id->num].start[0]) ++#else ++static struct cramfs_super super_fake; ++#define PART_OFFSET(x) (&super_fake) ++#endif + + static int cramfs_read_super (struct part_info *info) + { +diff -Nur u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h +--- u-boot-2006-04-18-1106/include/asm-arm/arch-pxa/pxa-regs.h 2006-04-18 09:05:03.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/include/asm-arm/arch-pxa/pxa-regs.h 2006-07-05 11:19:44.000000000 +0000 +@@ -1269,15 +1269,16 @@ + #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) + #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) + +-#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3) +-#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3) +-#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3) +-#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3) +-#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3) +-#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3) +-#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3) +-#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \ +- ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)) ++#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) ++#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) ++#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) ++#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) ++#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) ++#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) ++#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) ++#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ ++ ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) ++ + #else + + #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) +diff -Nur u-boot-2006-04-18-1106/include/configs/akita.h u-boot-2006-04-18-1106-new/include/configs/akita.h +--- u-boot-2006-04-18-1106/include/configs/akita.h 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/include/configs/akita.h 2006-07-13 11:00:46.000000000 +0000 +@@ -0,0 +1,324 @@ ++/* ++ * include/configs/akita.h ++ * ++ * Configuration settings for the Sharp Zaurus SL-C1000/C3100. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++ ++#undef SKIP_CONFIG_RELOCATE_UBOOT ++ ++#undef CONFIG_HARD_I2C ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ ++#define CONFIG_AKITA 1 /* on Sharp Zaurus Akita */ ++//#define CONFIG_MMC 1 ++#define BOARD_LATE_INIT 1 ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define RTC 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++//#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_FFUART 1 /* we use FFUART on Mainstone */ ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_BAUDRATE 115200 ++//#define CONFIG_DOS_PARTITION 1 ++ ++#undef CONFIG_SHOW_BOOT_PROGRESS ++ ++#if 1 ++#define CONFIG_BOOTDELAY 1 ++#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds\n" ++ ++#define CONFIG_BOOTCOMMAND \ ++ "if testkey 101 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x00060000 0x00540000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 2 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 fbcon=rotate:1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 18 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1 fbcon=rotate:1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 3 ; " \ ++ "then " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1 fbcon=rotate:1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "nand read.logical 0xa1000000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1; " \ ++ "bootm; " ++#else ++#define CONFIG_BOOTCOMMAND "" // "run boot_flash" ++#endif ++ ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw fbcon=rotate:1 ramdisk_size=8192" ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_COMMANDS (( \ ++ CONFIG_CMD_DFL | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_JFFS2 \ ++ ) & ~( \ ++ CFG_CMD_NET | \ ++ CFG_CMD_FLASH | \ ++ CFG_CMD_IMLS \ ++ )) ++ ++// CFG_CMD_ENV ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_HUSH_PARSER 1 ++#define CFG_PROMPT_HUSH_PS2 "> " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_DEVICE_NULLDEV 1 ++ ++#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ ++ ++#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ ++#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ ++ ++ /* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_MMC_BASE 0xF0000000 ++ ++/* ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ ++#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ ++#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ ++#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ ++#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ ++ ++#define PHYS_FLASH_1 0xd4000000 /* Flash Bank #1 */ ++ ++#define CFG_DRAM_BASE 0xa0000000 ++#define CFG_DRAM_SIZE 0x04000000 ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/* ++ * GPIO settings for Mainstone ++ */ ++ ++#define CFG_GPSR0_VAL 0x00708800 ++#define CFG_GPSR1_VAL 0x03cf0002 ++#define CFG_GPSR2_VAL 0x0021FC00 ++#define CFG_GPSR3_VAL 0x00000000 ++ ++#define CFG_GPCR0_VAL 0x00001000 ++#define CFG_GPCR1_VAL 0x00000000 ++#define CFG_GPCR2_VAL 0x00000000 ++#define CFG_GPCR3_VAL 0x00000000 ++ ++#define CFG_GPDR0_VAL 0xC27B9C04 ++#define CFG_GPDR1_VAL 0x00EFAA83 ++#define CFG_GPDR2_VAL 0x0E23FC00 ++#define CFG_GPDR3_VAL 0x001E1F81 ++ ++#define CFG_GAFR0_L_VAL 0x94F00000 ++#define CFG_GAFR0_U_VAL 0x015A859A ++#define CFG_GAFR1_L_VAL 0x999A955A ++#define CFG_GAFR1_U_VAL 0x0005A4AA ++#define CFG_GAFR2_L_VAL 0x6AA00000 ++#define CFG_GAFR2_U_VAL 0x55A8041A ++#define CFG_GAFR3_L_VAL 0x56AA955A ++#define CFG_GAFR3_U_VAL 0x00000001 ++ ++#define CFG_PSSR_VAL 0x20 // ??????????? ++ ++/* ++ * PCMCIA and CF Interfaces ++ */ ++#define CFG_MECR_VAL 0x00000001 ++#define CFG_MCMEM0_VAL 0x00010204 ++#define CFG_MCMEM1_VAL 0x00010204 ++#define CFG_MCATT0_VAL 0x00010204 ++#define CFG_MCATT1_VAL 0x00010204 ++#define CFG_MCIO0_VAL 0x0000c108 ++#define CFG_MCIO1_VAL 0x0001c108 ++ ++//#define CONFIG_PXA_PCMCIA 1 ++//#define CONFIG_PXA_IDE 1 ++ ++#define CONFIG_PCMCIA_SLOT_A 1 ++/* just to keep build system happy */ ++ ++#define CFG_PCMCIA_MEM_ADDR 0x28000000 ++#define CFG_PCMCIA_MEM_SIZE 0x04000000 ++ ++#define CFG_IDE_MAXBUS 1 ++/* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 ++/* max. 1 drive per IDE bus */ ++ ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++ ++#define CFG_ATA_BASE_ADDR 0x20000000 ++ ++/* Offset for data I/O */ ++#define CFG_ATA_DATA_OFFSET 0x1f0 ++ ++/* Offset for normal register accesses */ ++#define CFG_ATA_REG_OFFSET 0x1f0 ++ ++/* Offset for alternate registers */ ++#define CFG_ATA_ALT_OFFSET 0x3f0 ++ ++#define CFG_NO_FLASH 1 ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ ++ ++/*----------------------------------------------------------------------- ++ * NAND-FLASH stuff ++ *----------------------------------------------------------------------- ++ */ ++#undef CFG_NAND_LEGACY ++ ++/* NAND debugging */ ++//#define CONFIG_MTD_DEBUG ++//#define CONFIG_MTD_DEBUG_VERBOSE 3 ++ ++#define CFG_NAND_BASE 0xd4000000 ++#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define NAND_MAX_CHIPS 1 ++ ++//#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ ++//#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ ++ ++#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ ++#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ ++ ++/* ++ * JFFS2 partitions ++ * ++ */ ++/* No command line, one static partition */ ++//#undef CONFIG_JFFS2_CMDLINE ++//#define CONFIG_JFFS2_DEV "nand0" ++//#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF ++//#define CONFIG_JFFS2_PART_OFFSET 0x00060000 ++ ++/* mtdparts command line support */ ++/* Note: fake mtd_id used, no linux mtd map file */ ++ ++#define CONFIG_JFFS2_CMDLINE ++#define MTDIDS_DEFAULT "nand0=laze-0" ++//#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" ++#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++ ++/* ++ * SHARP SL NAND logical partition ++ */ ++#define NAND_LOGICAL 1 ++#define NAND_LOGICAL_SIZE 0x700000 ++ ++/* ++ * Environment ++ */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x40000 ++//#define CFG_ENV_OFFSET_REDUND 0x44000 ++#define CFG_ENV_SIZE 0x20000 ++ ++#endif /* __CONFIG_H */ +diff -Nur u-boot-2006-04-18-1106/include/configs/corgi.h u-boot-2006-04-18-1106-new/include/configs/corgi.h +--- u-boot-2006-04-18-1106/include/configs/corgi.h 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot-2006-04-18-1106-new/include/configs/corgi.h 2006-07-13 11:19:04.000000000 +0000 +@@ -0,0 +1,326 @@ ++/* ++ * include/configs/corgi.h ++ * ++ * Configuration settings for the Sharp Zaurus SL-C7x0/C860. ++ * ++ * (C) Copyright 2006 Alexander Chukov <sash@pdaXrom.org> ++ * ++ * portions from adsvix board configuration: ++ * (C) Copyright 2004 ++ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net ++ * (C) Copyright 2002 ++ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++ ++#undef SKIP_CONFIG_RELOCATE_UBOOT ++ ++#undef CONFIG_HARD_I2C ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_PXA250 1 /* This is an PXA255 CPU */ ++#define CONFIG_CORGI 1 /* on Sharp Zaurus Corgi */ ++//#define CONFIG_MMC 1 ++#define BOARD_LATE_INIT 1 ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define RTC 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++//#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_FFUART 1 /* we use FFUART on Mainstone */ ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_BAUDRATE 115200 ++//#define CONFIG_DOS_PARTITION 1 ++ ++#undef CONFIG_SHOW_BOOT_PROGRESS ++ ++#if 1 ++#define CONFIG_BOOTDELAY 1 ++#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds\n" ++ ++#define CONFIG_BOOTCOMMAND \ ++ "if testkey 101 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x00060000 0x00540000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 2 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 18 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hda1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "if testkey 3 ; " \ ++ "then " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/hdc1; " \ ++ "bootm; " \ ++ "fi; " \ ++ "nand read.logical 0xa0800000 0x005a0000 0x00160000; " \ ++ "setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mtdblock2 rootfstype=jffs2; " \ ++ "bootm; " ++#else ++#define CONFIG_BOOTCOMMAND "" // "run boot_flash" ++#endif ++ ++#define CONFIG_BOOTARGS "console=ttyS0,115200 console=tty1 root=/dev/ram rw ramdisk_size=8192" ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_COMMANDS (( \ ++ CONFIG_CMD_DFL | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_JFFS2 \ ++ ) & ~( \ ++ CFG_CMD_NET | \ ++ CFG_CMD_FLASH | \ ++ CFG_CMD_IMLS \ ++ )) ++ ++// CFG_CMD_ENV ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ ++#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_HUSH_PARSER 1 ++#define CFG_PROMPT_HUSH_PS2 "> " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ ++ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_DEVICE_NULLDEV 1 ++ ++#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ ++#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0xa0800000 /* default load address */ ++ ++#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ ++#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ ++ ++ /* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_MMC_BASE 0xF0000000 ++ ++/* ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ ++#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ ++#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ ++#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ ++#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ ++#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ ++ ++#define PHYS_FLASH_1 0xd4000000 /* Flash Bank #1 */ ++ ++#define CFG_DRAM_BASE 0xa0000000 ++#define CFG_DRAM_SIZE 0x04000000 ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/* ++ * GPIO settings for Mainstone ++ */ ++ ++#define CFG_GPSR0_VAL 0x00708800 ++#define CFG_GPSR1_VAL 0x03cf0002 ++#define CFG_GPSR2_VAL 0x0021FC00 ++#define CFG_GPSR3_VAL 0x00000000 ++ ++#define CFG_GPCR0_VAL 0x00001000 ++#define CFG_GPCR1_VAL 0x00000000 ++#define CFG_GPCR2_VAL 0x00000000 ++#define CFG_GPCR3_VAL 0x00000000 ++ ++#define CFG_GPDR0_VAL 0xC27B9C04 ++#define CFG_GPDR1_VAL 0x00EFAA83 ++#define CFG_GPDR2_VAL 0x0E23FC00 ++#define CFG_GPDR3_VAL 0x001E1F81 ++ ++#define CFG_GAFR0_L_VAL 0x94F00000 ++#define CFG_GAFR0_U_VAL 0x015A859A ++#define CFG_GAFR1_L_VAL 0x999A955A ++#define CFG_GAFR1_U_VAL 0x0005A4AA ++#define CFG_GAFR2_L_VAL 0x6AA00000 ++#define CFG_GAFR2_U_VAL 0x55A8041A ++#define CFG_GAFR3_L_VAL 0x56AA955A ++#define CFG_GAFR3_U_VAL 0x00000001 ++ ++#define CFG_PSSR_VAL 0x20 // ??????????? ++ ++/* ++ * PCMCIA and CF Interfaces ++ */ ++#define CFG_MECR_VAL 0x00000001 ++#define CFG_MCMEM0_VAL 0x00010204 ++#define CFG_MCMEM1_VAL 0x00010204 ++#define CFG_MCATT0_VAL 0x00010204 ++#define CFG_MCATT1_VAL 0x00010204 ++#define CFG_MCIO0_VAL 0x0000c108 ++#define CFG_MCIO1_VAL 0x0001c108 ++ ++//#define CONFIG_PXA_PCMCIA 1 ++//#define CONFIG_PXA_IDE 1 ++ ++#define CONFIG_PCMCIA_SLOT_A 1 ++/* just to keep build system happy */ ++ ++#define CFG_PCMCIA_MEM_ADDR 0x28000000 ++#define CFG_PCMCIA_MEM_SIZE 0x04000000 ++ ++#define CFG_IDE_MAXBUS 1 ++/* max. 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 ++/* max. 1 drive per IDE bus */ ++ ++#define CFG_ATA_IDE0_OFFSET 0x0000 ++ ++#define CFG_ATA_BASE_ADDR 0x20000000 ++ ++/* Offset for data I/O */ ++#define CFG_ATA_DATA_OFFSET 0x1f0 ++ ++/* Offset for normal register accesses */ ++#define CFG_ATA_REG_OFFSET 0x1f0 ++ ++/* Offset for alternate registers */ ++#define CFG_ATA_ALT_OFFSET 0x3f0 ++ ++#define CFG_NO_FLASH 1 ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ ++ ++/*----------------------------------------------------------------------- ++ * NAND-FLASH stuff ++ *----------------------------------------------------------------------- ++ */ ++#undef CFG_NAND_LEGACY ++ ++/* NAND debugging */ ++//#define CONFIG_MTD_DEBUG ++//#define CONFIG_MTD_DEBUG_VERBOSE 3 ++ ++#define CFG_NAND_BASE 0xd4000000 ++#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define NAND_MAX_CHIPS 1 ++ ++//#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ ++//#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ ++ ++#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ ++#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ ++ ++#define NAND_ALLOW_ERASE_ALL 1 ++ ++/* ++ * JFFS2 partitions ++ * ++ */ ++/* No command line, one static partition */ ++//#undef CONFIG_JFFS2_CMDLINE ++//#define CONFIG_JFFS2_DEV "nand0" ++//#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF ++//#define CONFIG_JFFS2_PART_OFFSET 0x00060000 ++ ++/* mtdparts command line support */ ++/* Note: fake mtd_id used, no linux mtd map file */ ++ ++#define CONFIG_JFFS2_CMDLINE ++#define MTDIDS_DEFAULT "nand0=laze-0" ++//#define MTDPARTS_DEFAULT "mtdparts=laze-0:256k(uboot),128k(env),-(jffs2)" ++#define MTDPARTS_DEFAULT "mtdparts=laze-0:7168k(Logical),-(JFFS2)" ++ ++/* ++ * SHARP SL NAND logical partition ++ */ ++#define NAND_LOGICAL 1 ++#define NAND_LOGICAL_SIZE 0x700000 ++ ++/* ++ * Environment ++ */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x40000 ++//#define CFG_ENV_OFFSET_REDUND 0x44000 ++#define CFG_ENV_SIZE 0x20000 ++ ++#endif /* __CONFIG_H */ +--- s/examples/Makefile.orig 2006-12-09 15:08:45.000000000 +0600 ++++ s/examples/Makefile 2006-12-09 15:09:00.000000000 +0600 +@@ -60,7 +60,7 @@ + include $(TOPDIR)/config.mk + + SREC = hello_world.srec +-BIN = hello_world.bin hello_world ++BIN = hello_world hello_world.bin + + ifeq ($(CPU),mpc8xx) + SREC = test_burst.srec +@@ -122,7 +122,7 @@ + + CPPFLAGS += -I.. + +-all: .depend $(OBJS) $(LIB) $(SREC) $(BIN) ++all: .depend $(OBJS) $(LIB) $(BIN) $(SREC) + + ######################################################################### + $(LIB): .depend $(LIBOBJS) diff --git a/packages/u-boot/u-boot-git/uboot-eabi-fix-HACK2.patch b/packages/u-boot/u-boot-git/uboot-eabi-fix-HACK2.patch new file mode 100644 index 0000000000..858296b980 --- /dev/null +++ b/packages/u-boot/u-boot-git/uboot-eabi-fix-HACK2.patch @@ -0,0 +1,94 @@ +Index: git/lib_arm/div0.c +=================================================================== +--- git.orig/lib_arm/div0.c ++++ git/lib_arm/div0.c +@@ -22,9 +22,3 @@ + */ + + /* Replacement (=dummy) for GNU/Linux division-by zero handler */ +-void __div0 (void) +-{ +- extern void hang (void); +- +- hang(); +-} +Index: git/Makefile +=================================================================== +--- git.orig/Makefile ++++ git/Makefile +@@ -225,7 +225,7 @@ LIBS := $(addprefix $(obj),$(LIBS)) + .PHONY : $(LIBS) + + # Add GCC lib +-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc ++PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -lgcc_eh + + # The "tools" are needed early, so put this first + # Don't include stuff already done in $(LIBS) +--- git/board/akita/akita.c.orig 2007-12-26 17:52:33.000000000 +0000 ++++ git/board/akita/akita.c 2007-12-26 17:52:59.000000000 +0000 +@@ -87,3 +87,7 @@ + + return 0; + } ++ ++void raise() {} ++ ++void abort() {} +--- git/board/corgi/corgi.c.orig 2007-12-26 17:52:33.000000000 +0000 ++++ git/board/corgi/corgi.c 2007-12-26 17:52:59.000000000 +0000 +@@ -87,3 +87,7 @@ + + return 0; + } ++ ++void raise() {} ++ ++void abort() {} +Index: git/lib_arm/div0.c +=================================================================== +--- git.orig/lib_arm/div0.c ++++ git/lib_arm/div0.c +@@ -22,9 +22,3 @@ + */ + + /* Replacement (=dummy) for GNU/Linux division-by zero handler */ +-void __div0 (void) +-{ +- extern void hang (void); +- +- hang(); +-} +Index: git/Makefile +=================================================================== +--- git.orig/Makefile ++++ git/Makefile +@@ -225,7 +225,7 @@ LIBS := $(addprefix $(obj),$(LIBS)) + .PHONY : $(LIBS) + + # Add GCC lib +-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc ++PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -lgcc_eh + + # The "tools" are needed early, so put this first + # Don't include stuff already done in $(LIBS) +--- git/board/akita/akita.c.orig 2007-12-26 17:52:33.000000000 +0000 ++++ git/board/akita/akita.c 2007-12-26 17:52:59.000000000 +0000 +@@ -87,3 +87,7 @@ + + return 0; + } ++ ++void raise() {} ++ ++void abort() {} +--- git/board/corgi/corgi.c.orig 2007-12-26 17:52:33.000000000 +0000 ++++ git/board/corgi/corgi.c 2007-12-26 17:52:59.000000000 +0000 +@@ -87,3 +87,7 @@ + + return 0; + } ++ ++void raise() {} ++ ++void abort() {} diff --git a/packages/u-boot/u-boot_git.bb b/packages/u-boot/u-boot_git.bb index 04eb7eb2e8..56b0797e01 100644 --- a/packages/u-boot/u-boot_git.bb +++ b/packages/u-boot/u-boot_git.bb @@ -1,10 +1,12 @@ require u-boot.inc -PR="r16" +PR="r17" SRCREV_davinci-sffsdr = "4b50cd12a3b3c644153c4cf393f4a4c12289e5aa" SRCREV_davinci-dvevm = "4b50cd12a3b3c644153c4cf393f4a4c12289e5aa" SRCREV_beagleboard = "9c1c36409b2cb4e81aab0bd9d0a69c68f4475aae" SRCREV_neuros-osd2 = "bc66414cd99154a40949db1bd2f45a62b8febca9" +SRCREV_akita = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee" +SRCREV_c7x0 = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee" SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git " SRC_URI_sequoia = "git://www.denx.de/git/u-boot.git;protocol=git;tag=cf3b41e0c1111dbb865b6e34e9f3c3d3145a6093 " @@ -15,6 +17,14 @@ SRC_URI_beagleboard = "git://www.sakoman.net/git/u-boot-omap3.git;branch=test;pr " SRC_URI_neuros-osd2 += "file://Makefile-fix.patch;patch=1" +SRC_URI_append_akita = "file://pdaXrom-u-boot.patch;patch=1 \ + file://uboot-eabi-fix-HACK2.patch;patch=1 \ + file://akita-standard-partitioning.patch;patch=1 \ + " +SRC_URI_append_c7x0 = "file://pdaXrom-u-boot.patch;patch=1 \ + file://uboot-eabi-fix-HACK2.patch;patch=1 \ + file://corgi-standard-partitioning.patch;patch=1 \ + " S = "${WORKDIR}/git" |