diff options
Diffstat (limited to 'packages/ixp4xx/ixp4xx-csr_2.1.1.bb')
| -rw-r--r-- | packages/ixp4xx/ixp4xx-csr_2.1.1.bb | 125 |
1 files changed, 125 insertions, 0 deletions
diff --git a/packages/ixp4xx/ixp4xx-csr_2.1.1.bb b/packages/ixp4xx/ixp4xx-csr_2.1.1.bb new file mode 100644 index 0000000000..c97a54bb74 --- /dev/null +++ b/packages/ixp4xx/ixp4xx-csr_2.1.1.bb @@ -0,0 +1,125 @@ +DEFAULT_PREFERENCE = "-1" +# Intel ixp4xx access library software. Note that this has an Intel +# license which restricts its use. +MAINTAINER = "NSLU2 Linux <nslu2-linux@yahoogroups.com>" +HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp420.htm" +LICENSE = "http://www.intel.com/design/network/swsup/np_sla/ixp400.htm" +LICENSE_HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm" +# You must download the following software to your OpenEmbedded downloads +# directory before using this package: +# +# BSD_ixp400AccessLibrary-2_1.zip +# BSD_ixp400AccessLibrary-2_1_1.zip +# IPL_ixp400NpeLibrary-2_1.zip +# +# To do this go to the LICENSE_HOMEPAGE above, register/login (using a +# web browser which is supported by the login page), this will give you +# access to the web page from which you can download the software - you +# need the: "Intel® IXP400 Software and RedBoot* Boot Loader" and, from +# this the "Intel Hardware Access Software" and "NPE Microcode" (both +# versions 2.1, encryption is not required.) +# +# Store the files with the names given below in your downloads directory +# and store the 32 character md5sum of the file in a file of the same +# name with the additional extension .md5: +# +# BSD_ixp400AccessLibrary-2_1.zip.md5 +# BSD_ixp400AccessLibrary-2_1_1.zip.md5 +# IPL_ixp400NpeLibrary-2_1.zip.md5 +# +SRC_URI = "http://www.intel.com/Please-Read-The-BB-File/BSD_ixp400AccessLibrary-2_1.zip" +SRC_URI += "http://www.intel.com/Please-Read-The-BB-File/BSD_ixp400AccessLibrary-2_1_1.zip" +SRC_URI += "http://www.intel.com/Please-Read-The-BB-File/IPL_ixp400NpeLibrary-2_1.zip" +SRC_URI += "file://Makefile.patch;patch=1" +SRC_URI += "file://ixethdb-header.patch;patch=1" +SRC_URI += "file://bit-macro.patch;patch=1" +SRC_URI += "file://ixnpemhconfigisr-is-private.patch;patch=1" +SRC_URI += "file://le.patch;patch=1" +SRC_URI += "file://mii-debug.patch;patch=1" +SRC_URI += "file://rtl8201-support.patch;patch=1" +SRC_URI += "file://gcc4.patch;patch=1" +SRC_URI += "file://oe-makefile.patch;patch=1" +SRC_URI += "file://livelock.patch;patch=1" +SRC_URI += "file://module-param.patch;patch=1" + +DEPENDS = "ixp-osal" +S = "${WORKDIR}/ixp400_xscale_sw" +PR = "r0" + +COMPATIBLE_HOST = "^arm.*-linux.*" + +inherit module + +do_pre_patch () { + ( cd ${WORKDIR} ; mkdir patches ; mv BSD_ixp400AccessLibrary-2_1_1.patch patches/ ; \ + echo "BSD_ixp400AccessLibrary-2_1_1.patch -p0" >> patches/series ; \ + quilt push ) +} + +addtask pre_patch before do_patch + +IX_TARGET = "linux${ARCH_BYTE_SEX}" +IX_ENSURE = "" +#IX_ENSURE = "IX_OSAL_ENSURE_ON=1" + +OSAL_PATH = "lib/ixp425/linux/${IX_TARGET}" +# This is a somewhat arbitrary choice: +OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal" + +# COMPONENTS: do not build all the components, this just creates a +# ridiculously large module which duplicates functionality in the +# available Linux drivers. +COMPONENTS = "qmgr npeMh npeDl ethAcc ethDB ethMii featureCtrl osServices oslinux" +CODELETS_COMPONENTS = "" + +# NOTE: IX_INCLUDE_MICROCODE causes the microcode to be included in +# the ixp4xx-csr module, this *requires* the IPL_ixp400NpeLibrary-2_1.zip +# to be added to the SRC_URI - see above. +EXTRA_OEMAKE = "'AR=${AR}' \ + 'IX_XSCALE_SW=${S}' \ + 'IX_TARGET=${IX_TARGET}' \ + '${IX_TARGET}_COMPONENTS=${COMPONENTS}' \ + '${IX_TARGET}_CODELETS_COMPONENTS=${CODELETS_COMPONENTS}' \ + 'IX_DEVICE=ixp42X' \ + 'IX_INCLUDE_MICROCODE=1' \ + 'IX_UTOPIAMODE=0' \ + 'IX_MPHYSINGLEPORT=1' \ + ${IX_ENSURE} \ + 'LINUX_SRC=${STAGING_KERNEL_DIR}' \ + 'LINUX_CROSS_COMPILE=${HOST_PREFIX}' \ + 'OSAL_DIR=${OSAL_DIR}' \ + 'OSAL_IMAGE=${OSAL_DIR}/${OSAL_PATH}/libosal.a' \ + 'OSAL_MODULE=${OSAL_DIR}/${OSAL_PATH}/ixp_osal.o' \ + " + +MAKE_TARGETS = "lib/${IX_TARGET}/ixp400.o" + +KCONFIG_FILE = "${STAGING_KERNEL_DIR}/kernel-config" +do_stage () { + install -d ${STAGING_INCDIR}/linux/ixp4xx-csr + install -m 0644 src/include/*.h ${STAGING_INCDIR}/linux/ixp4xx-csr/ + # Since Module.symvers in the kernel staging directory doesn't include + # the symbols from ixp400.o we need to add them to another file for + # the ixp400-eth build + rm -f '${STAGING_KERNEL_DIR}/ixp400-csr.symvers' + . '${KCONFIG_FILE}' + if '${STAGING_KERNEL_DIR}/scripts/mod/modpost' \ + ${CONFIG_MODVERSIONS:+-m} \ + ${CONFIG_MODULE_SRCVERSION_ALL:+-a} \ + -i '${STAGING_KERNEL_DIR}/Module.symvers' \ + -o '${STAGING_KERNEL_DIR}/ixp400-csr.symvers' \ + ${MAKE_TARGETS} 2>&1 | egrep . + then + echo "MODPOST errors - see above" + return 1 + else + return 0 + fi +} + +PACKAGES = "${PN}" + +do_install () { + install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/ixp400 + install -m 0644 lib/${IX_TARGET}/ixp400.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/ixp400/ +} |