diff options
Diffstat (limited to 'libmikmod')
| -rw-r--r-- | libmikmod/libmikmod/autofoo.patch | 0 | ||||
| -rw-r--r-- | libmikmod/libmikmod/m4.patch | 202 | ||||
| -rw-r--r-- | libmikmod/libmikmod_3.1.11.oe | 9 | ||||
| -rw-r--r-- | libmikmod/libmikmod_3.2.0-beta2.oe | 8 |
4 files changed, 207 insertions, 12 deletions
diff --git a/libmikmod/libmikmod/autofoo.patch b/libmikmod/libmikmod/autofoo.patch new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/libmikmod/libmikmod/autofoo.patch diff --git a/libmikmod/libmikmod/m4.patch b/libmikmod/libmikmod/m4.patch index b7386f73b4..854fc22b90 100644 --- a/libmikmod/libmikmod/m4.patch +++ b/libmikmod/libmikmod/m4.patch @@ -9,3 +9,205 @@ [dnl dnl Get the cflags and libraries from the libmikmod-config script dnl + +# +# Patch managed by http://www.holgerschurig.de/patcher.html +# + +--- /dev/null ++++ libmikmod-3.2.0-beta2/m4/esd.m4 +@@ -0,0 +1,194 @@ ++# Configure paths for ESD ++# Manish Singh 98-9-30 ++# stolen back from Frank Belew ++# stolen from Manish Singh ++# Shamelessly stolen from Owen Taylor ++ ++dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) ++dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS ++dnl ++AC_DEFUN(AM_PATH_ESD, ++[dnl ++dnl Get the cflags and libraries from the esd-config script ++dnl ++AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)], ++ esd_prefix="$withval", esd_prefix="") ++AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)], ++ esd_exec_prefix="$withval", esd_exec_prefix="") ++AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program], ++ , enable_esdtest=yes) ++ ++ if test x$esd_exec_prefix != x ; then ++ esd_args="$esd_args --exec-prefix=$esd_exec_prefix" ++ if test x${ESD_CONFIG+set} != xset ; then ++ ESD_CONFIG=$esd_exec_prefix/bin/esd-config ++ fi ++ fi ++ if test x$esd_prefix != x ; then ++ esd_args="$esd_args --prefix=$esd_prefix" ++ if test x${ESD_CONFIG+set} != xset ; then ++ ESD_CONFIG=$esd_prefix/bin/esd-config ++ fi ++ fi ++ ++ AC_PATH_PROG(ESD_CONFIG, esd-config, no) ++ min_esd_version=ifelse([$1], ,0.2.7,$1) ++ AC_MSG_CHECKING(for ESD - version >= $min_esd_version) ++ no_esd="" ++ if test "$ESD_CONFIG" = "no" ; then ++ no_esd=yes ++ else ++ AC_LANG_SAVE ++ AC_LANG_C ++ ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags` ++ ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs` ++ ++ esd_major_version=`$ESD_CONFIG $esd_args --version | \ ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` ++ esd_minor_version=`$ESD_CONFIG $esd_args --version | \ ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` ++ esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \ ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` ++ if test "x$enable_esdtest" = "xyes" ; then ++ ac_save_CFLAGS="$CFLAGS" ++ ac_save_LIBS="$LIBS" ++ CFLAGS="$CFLAGS $ESD_CFLAGS" ++ LIBS="$LIBS $ESD_LIBS" ++dnl ++dnl Now check if the installed ESD is sufficiently new. (Also sanity ++dnl checks the results of esd-config to some extent ++dnl ++ rm -f conf.esdtest ++ AC_TRY_RUN([ ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <esd.h> ++ ++char* ++my_strdup (char *str) ++{ ++ char *new_str; ++ ++ if (str) ++ { ++ new_str = malloc ((strlen (str) + 1) * sizeof(char)); ++ strcpy (new_str, str); ++ } ++ else ++ new_str = NULL; ++ ++ return new_str; ++} ++ ++int main () ++{ ++ int major, minor, micro; ++ char *tmp_version; ++ ++ system ("touch conf.esdtest"); ++ ++ /* HP/UX 9 (%@#!) writes to sscanf strings */ ++ tmp_version = my_strdup("$min_esd_version"); ++ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { ++ printf("%s, bad version string\n", "$min_esd_version"); ++ exit(1); ++ } ++ ++ if (($esd_major_version > major) || ++ (($esd_major_version == major) && ($esd_minor_version > minor)) || ++ (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro))) ++ { ++ return 0; ++ } ++ else ++ { ++ printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version); ++ printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro); ++ printf("*** best to upgrade to the required version.\n"); ++ printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n"); ++ printf("*** to point to the correct copy of esd-config, and remove the file\n"); ++ printf("*** config.cache before re-running configure\n"); ++ return 1; ++ } ++} ++ ++],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) ++ CFLAGS="$ac_save_CFLAGS" ++ LIBS="$ac_save_LIBS" ++ AC_LANG_RESTORE ++ fi ++ fi ++ if test "x$no_esd" = x ; then ++ AC_MSG_RESULT(yes) ++ ifelse([$2], , :, [$2]) ++ else ++ AC_MSG_RESULT(no) ++ if test "$ESD_CONFIG" = "no" ; then ++ echo "*** The esd-config script installed by ESD could not be found" ++ echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in" ++ echo "*** your path, or set the ESD_CONFIG environment variable to the" ++ echo "*** full path to esd-config." ++ else ++ if test -f conf.esdtest ; then ++ : ++ else ++ echo "*** Could not run ESD test program, checking why..." ++ CFLAGS="$CFLAGS $ESD_CFLAGS" ++ LIBS="$LIBS $ESD_LIBS" ++ AC_LANG_SAVE ++ AC_LANG_C ++ AC_TRY_LINK([ ++#include <stdio.h> ++#include <esd.h> ++], [ return 0; ], ++ [ echo "*** The test program compiled, but did not run. This usually means" ++ echo "*** that the run-time linker is not finding ESD or finding the wrong" ++ echo "*** version of ESD. If it is not finding ESD, you'll need to set your" ++ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" ++ echo "*** to the installed location Also, make sure you have run ldconfig if that" ++ echo "*** is required on your system" ++ echo "***" ++ echo "*** If you have an old version installed, it is best to remove it, although" ++ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], ++ [ echo "*** The test program failed to compile or link. See the file config.log for the" ++ echo "*** exact error that occured. This usually means ESD was incorrectly installed" ++ echo "*** or that you have moved ESD since it was installed. In the latter case, you" ++ echo "*** may want to edit the esd-config script: $ESD_CONFIG" ]) ++ CFLAGS="$ac_save_CFLAGS" ++ LIBS="$ac_save_LIBS" ++ AC_LANG_RESTORE ++ fi ++ fi ++ ESD_CFLAGS="" ++ ESD_LIBS="" ++ ifelse([$3], , :, [$3]) ++ fi ++ AC_SUBST(ESD_CFLAGS) ++ AC_SUBST(ESD_LIBS) ++ rm -f conf.esdtest ++]) ++ ++dnl AM_ESD_SUPPORTS_MULTIPLE_RECORD([ACTION-IF-SUPPORTS [, ACTION-IF-NOT-SUPPORTS]]) ++dnl Test, whether esd supports multiple recording clients (version >=0.2.21) ++dnl ++AC_DEFUN(AM_ESD_SUPPORTS_MULTIPLE_RECORD, ++[dnl ++ AC_MSG_NOTICE([whether installed esd version supports multiple recording clients]) ++ ac_save_ESD_CFLAGS="$ESD_CFLAGS" ++ ac_save_ESD_LIBS="$ESD_LIBS" ++ AM_PATH_ESD(0.2.21, ++ ifelse([$1], , [ ++ AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, true) ++ AC_DEFINE(ESD_SUPPORTS_MULTIPLE_RECORD, 1, ++ [Define if you have esound with support of multiple recording clients.])], ++ [$1]), ++ ifelse([$2], , [AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, false)], [$2]) ++ if test "x$ac_save_ESD_CFLAGS" != x ; then ++ ESD_CFLAGS="$ac_save_ESD_CFLAGS" ++ fi ++ if test "x$ac_save_ESD_LIBS" != x ; then ++ ESD_LIBS="$ac_save_ESD_LIBS" ++ fi ++ ) ++]) diff --git a/libmikmod/libmikmod_3.1.11.oe b/libmikmod/libmikmod_3.1.11.oe index 24616ed652..ddd22753d5 100644 --- a/libmikmod/libmikmod_3.1.11.oe +++ b/libmikmod/libmikmod_3.1.11.oe @@ -2,7 +2,9 @@ DESCRIPTION = "libmikmod is a module player library supporting many formats, inc SECTION = "libs" PRIORITY = "optional" -SRC_URI = "http://mikmod.raphnet.net/files/libmikmod-${PV}.tar.gz" +SRC_URI = "http://mikmod.raphnet.net/files/libmikmod-${PV}.tar.gz \ + file://m4.patch;patch=1 \ + file://autofoo.patch;patch=1" inherit autotools @@ -10,11 +12,6 @@ EXTRA_OECONF = "--disable-af --disable-alsa --disable-esd \ --enable-oss --disable-sam9407 --disable-ultra \ --disable-esdtest --enable-threads" -do_configure() { - gnu-configize - oe_runconf -} - do_stage() { oe_libinstall -a -so -C libmikmod libmikmod ${STAGING_LIBDIR} install -m 0644 ${S}/include/mikmod.h ${STAGING_INCDIR}/ diff --git a/libmikmod/libmikmod_3.2.0-beta2.oe b/libmikmod/libmikmod_3.2.0-beta2.oe index 32a49cb32d..fac790b7a5 100644 --- a/libmikmod/libmikmod_3.2.0-beta2.oe +++ b/libmikmod/libmikmod_3.2.0-beta2.oe @@ -3,7 +3,8 @@ SECTION = "libs" PRIORITY = "optional" SRC_URI = "http://mikmod.raphnet.net/files/libmikmod-${PV}.tar.gz \ -file://m4.patch;patch=1" +file://m4.patch;patch=1 \ +file://autofoo.patch;patch=1" inherit autotools binconfig @@ -16,11 +17,6 @@ EXTRA_OECONF = "--disable-af \ --disable-esdtest \ --enable-threads" -do_configure() { - gnu-configize - oe_runconf -} - do_stage() { oe_libinstall -a -so -C libmikmod libmikmod ${STAGING_LIBDIR} install -m 0644 ${S}/include/mikmod.h ${STAGING_INCDIR}/ |