linux-omap 2.6.28: introduce MACHINE_KERNEL_PR

linux-omap 2.6.29: introduce MACHINE_KERNEL_PR, seperate out dss2 patches, add isp and musb patches

1 files changed, 145 insertions, 0 deletions

diff --git a/recipes/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch b/recipes/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch
new file mode 100644
index 0000000000..fc34fb983e
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch
@@ -0,0 +1,145 @@
+From 4288b7df4ae6629a4fb14aca2c489da01d4d19c3 Mon Sep 17 00:00:00 2001
+From: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
+Date: Tue, 31 Mar 2009 12:35:09 -0700
+Subject: [PATCH] musb: support disconnect after HNP roleswitch
+
+Adjust HNP state machines in MUSB driver so that they handle the
+case where the cable is disconnected.  The A-side machine was
+very wrong (unrecoverable); the B-Side was much less so.
+
+ - A_PERIPHERAL ... as usual, the non-observability of the ID
+   pin through Mentor's registers makes trouble.  We can't go
+   directly to A_WAIT_VFALL to end the session and start the
+   disconnect processing.  We can however sense link suspending,
+   go to A_WAIT_BCON, and from there use OTG timeouts to finally
+   trigger that A_WAIT_VFALL transition.  (Hoping that nobody
+   reconnects quickly to that port and notices the wrong state.)
+
+ - B_HOST ... actually clear the Host Request (HR) bit as the
+   messages say, disconnect the peripheral from the root hub,
+   and don't detour through a suspend state.  (In some cases
+   this would eventually have cleaned up.)
+
+Also adjust the A_SUSPEND transition to respect the A_AIDL_BDIS
+timeout, so if HNP doesn't trigger quickly enough the A_WAIT_VFALL
+transition happens as it should.
+
+Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
+---
+ drivers/usb/musb/musb_core.c    |   41 +++++++++++++++++++++++++++-----------
+ drivers/usb/musb/musb_gadget.c  |    2 +
+ drivers/usb/musb/musb_virthub.c |    4 +++
+ 3 files changed, 35 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
+index 9dc995a..5770ccb 100644
+--- a/drivers/usb/musb/musb_core.c
++++ b/drivers/usb/musb/musb_core.c
+@@ -304,9 +304,11 @@ void musb_otg_timer_func(unsigned long data)
+ 		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ 		musb->is_active = 0;
+ 		break;
++	case OTG_STATE_A_SUSPEND:
+ 	case OTG_STATE_A_WAIT_BCON:
+-		DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
+-		musb_hnp_stop(musb);
++		DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
++		musb_set_vbus(musb, 0);
++		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ 		break;
+ 	default:
+ 		DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
+@@ -324,15 +326,12 @@ void musb_hnp_stop(struct musb *musb)
+ 	void __iomem	*mbase = musb->mregs;
+ 	u8	reg;
+ 
++	DBG(1, "HNP: stop from %s\n", otg_state_string(musb));
++
+ 	switch (musb->xceiv->state) {
+ 	case OTG_STATE_A_PERIPHERAL:
+-	case OTG_STATE_A_WAIT_VFALL:
+-	case OTG_STATE_A_WAIT_BCON:
+-		DBG(1, "HNP: Switching back to A-host\n");
+ 		musb_g_disconnect(musb);
+-		musb->xceiv->state = OTG_STATE_A_IDLE;
+-		MUSB_HST_MODE(musb);
+-		musb->is_active = 0;
++		DBG(1, "HNP: back to %s\n", otg_state_string(musb));
+ 		break;
+ 	case OTG_STATE_B_HOST:
+ 		DBG(1, "HNP: Disabling HR\n");
+@@ -775,7 +774,16 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+ #endif	/* HOST */
+ #ifdef CONFIG_USB_MUSB_OTG
+ 		case OTG_STATE_B_HOST:
+-			musb_hnp_stop(musb);
++			/* REVISIT this behaves for "real disconnect"
++			 * cases; make sure the other transitions from
++			 * from B_HOST act right too.  The B_HOST code
++			 * in hnp_stop() is currently not used...
++			 */
++			musb_root_disconnect(musb);
++			musb_to_hcd(musb)->self.is_b_host = 0;
++			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
++			MUSB_DEV_MODE(musb);
++			musb_g_disconnect(musb);
+ 			break;
+ 		case OTG_STATE_A_PERIPHERAL:
+ 			musb_hnp_stop(musb);
+@@ -807,10 +815,19 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+ 		switch (musb->xceiv->state) {
+ #ifdef	CONFIG_USB_MUSB_OTG
+ 		case OTG_STATE_A_PERIPHERAL:
+-			/*
+-			 * We cannot stop HNP here, devctl BDEVICE might be
+-			 * still set.
++			/* We also come here if the cable is removed, since
++			 * this silicon doesn't report ID-no-longer-grounded.
++			 *
++			 * We depend on T(a_wait_bcon) to shut us down, and
++			 * hope users don't do anything dicey during this
++			 * undesired detour through A_WAIT_BCON.
+ 			 */
++			musb_hnp_stop(musb);
++			usb_hcd_resume_root_hub(musb_to_hcd(musb));
++			musb_root_disconnect(musb);
++			musb_platform_try_idle(musb, jiffies
++					+ msecs_to_jiffies(musb->a_wait_bcon
++						? : OTG_TIME_A_WAIT_BCON));
+ 			break;
+ #endif
+ 		case OTG_STATE_B_PERIPHERAL:
+diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
+index 7dd3d59..8b3c4e2 100644
+--- a/drivers/usb/musb/musb_gadget.c
++++ b/drivers/usb/musb/musb_gadget.c
+@@ -1962,9 +1962,11 @@ void musb_g_disconnect(struct musb *musb)
+ 		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+ 			otg_state_string(musb));
+ 		musb->xceiv->state = OTG_STATE_A_IDLE;
++		MUSB_HST_MODE(musb);
+ 		break;
+ 	case OTG_STATE_A_PERIPHERAL:
+ 		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
++		MUSB_HST_MODE(musb);
+ 		break;
+ 	case OTG_STATE_B_WAIT_ACON:
+ 	case OTG_STATE_B_HOST:
+diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
+index 14f7cf3..e8ef925 100644
+--- a/drivers/usb/musb/musb_virthub.c
++++ b/drivers/usb/musb/musb_virthub.c
+@@ -83,6 +83,10 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
+ 			musb->xceiv->state = OTG_STATE_A_SUSPEND;
+ 			musb->is_active = is_otg_enabled(musb)
+ 					&& musb->xceiv->host->b_hnp_enable;
++			if (musb->is_active)
++				mod_timer(&musb->otg_timer, jiffies
++					+ msecs_to_jiffies(
++						OTG_TIME_A_AIDL_BDIS));
+ 			musb_platform_try_idle(musb, 0);
+ 			break;
+ #ifdef	CONFIG_USB_MUSB_OTG
+-- 
+1.6.0.4
+