merge of '06439bd12faeb366d7d703a017d5c609d41cb96e'

     and '8334fa112d76dd1bff6086d9cbd2007755c42e05'

4 files changed, 242 insertions, 5 deletions

diff --git a/packages/u-boot/u-boot-git/beagleboard/beagle-600MHz.diff b/packages/u-boot/u-boot-git/beagleboard/beagle-600MHz.diff
new file mode 100644
index 0000000000..fe183ddb77
--- /dev/null
+++ b/packages/u-boot/u-boot-git/beagleboard/beagle-600MHz.diff
@@ -0,0 +1,21 @@
+From: Mans Rullgard <mans@mansr.com>
+Date: Mon, 29 Sep 2008 19:56:45 +0000 (+0100)
+Subject: OMAP3: Set MPU clock to 600 MHz
+X-Git-Url: http://git.mansr.com/?p=u-boot;a=commitdiff_plain;h=caccdb772c3028a3e3e801fb1554788150752ffc
+
+OMAP3: Set MPU clock to 600 MHz
+---
+
+diff --git a/cpu/omap3/lowlevel_init.S b/cpu/omap3/lowlevel_init.S
+index 1f9a0e9..f95a65f 100644
+--- a/cpu/omap3/lowlevel_init.S
++++ b/cpu/omap3/lowlevel_init.S
+@@ -208,7 +208,7 @@ mpu_dpll_param:
+ /* ES1 */
+ .word 0x17D,0x0C,0x03,0x01
+ /* ES2 */
+-.word 0x1F4,0x0C,0x03,0x01
++.word 0x258,0x0C,0x03,0x01
+ /* 3410 */
+ .word 0x10A,0x0C,0x03,0x01
+ 
diff --git a/packages/u-boot/u-boot-git/beagleboard/mru-256.diff b/packages/u-boot/u-boot-git/beagleboard/mru-256.diff
new file mode 100644
index 0000000000..6099fe6c9d
--- /dev/null
+++ b/packages/u-boot/u-boot-git/beagleboard/mru-256.diff
@@ -0,0 +1,192 @@
+From: Mans Rullgard <mans@mansr.com>
+Date: Thu, 2 Oct 2008 01:25:35 +0000 (+0100)
+Subject: OMAP3: Beagleboard can have dual-chip RAM
+X-Git-Url: http://git.mansr.com/?p=u-boot;a=commitdiff_plain;h=ef6ee5af8d584bddadb2d45ad4320cef96b8a934;hp=caccdb772c3028a3e3e801fb1554788150752ffc
+
+OMAP3: Beagleboard can have dual-chip RAM
+
+Some Beagleboards are fitted with dual-chip RAM. Returning DDR_STACKED
+from get_mem_type() causes the second chip (on CS1) to be enabled.
+
+FIXME: need a better way to configure this.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+
+diff --git a/cpu/omap3/board.c b/cpu/omap3/board.c
+index 804021f..f7cf289 100644
+--- a/cpu/omap3/board.c
++++ b/cpu/omap3/board.c
+@@ -265,15 +265,17 @@ int dram_init(void)
+ 	 * where it can be started.  Early init code will init
+ 	 * memory on CS0.
+ 	 */
+-	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED))
++	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+ 		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
++		make_cs1_contiguous();
++	}
+ 
+ 	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+ 	size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+ 
+ 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ 	gd->bd->bi_dram[0].size = size0;
+-	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
++	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(1);
+ 	gd->bd->bi_dram[1].size = size1;
+ 
+ 	return 0;
+diff --git a/cpu/omap3/mem.c b/cpu/omap3/mem.c
+index 955fa70..53687a5 100644
+--- a/cpu/omap3/mem.c
++++ b/cpu/omap3/mem.c
+@@ -114,12 +114,12 @@ void make_cs1_contiguous(void)
+  *             for a part. Helps in guessing which part
+  *             we are currently using.
+  *******************************************************/
+-u32 mem_ok(void)
++u32 mem_ok(u32 cs)
+ {
+ 	u32 val1, val2, addr;
+ 	u32 pattern = 0x12345678;
+ 
+-	addr = OMAP34XX_SDRC_CS0;
++	addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+ 
+ 	__raw_writel(0x0, addr + 0x400);  /* clear pos A */
+ 	__raw_writel(pattern, addr);	  /* pattern to pos B */
+@@ -156,43 +156,40 @@ void sdrc_init(void)
+ 
+ void do_sdrc_init(u32 offset, u32 early)
+ {
++	u32 actim_offs = offset? 0x28: 0;
+ 
+-	/* reset sdrc controller */
+-	__raw_writel(SOFTRESET, SDRC_SYSCONFIG);
+-	wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
+-	__raw_writel(0, SDRC_SYSCONFIG);
++	if (early) {
++		/* reset sdrc controller */
++		__raw_writel(SOFTRESET, SDRC_SYSCONFIG);
++		wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
++		__raw_writel(0, SDRC_SYSCONFIG);
+ 
+-	/* setup sdrc to ball mux */
+-	__raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
++		/* setup sdrc to ball mux */
++		__raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
+ 
+-	/* SDRC_MCFG0 register */
+-	(*(unsigned int *) 0x6D000080) = 0x02584099; /* from Micron */
++		/* Disble Power Down of CKE cuz of 1 CKE on combo part */
++		__raw_writel(0x00000081, SDRC_POWER);
+ 
+-	/* SDRC_RFR_CTRL0 register */
+-	(*(unsigned int *) 0x6D0000a4) = 0x54601;    /* for 166M */
++		__raw_writel(0x0000A, SDRC_DLLA_CTRL);
++		sdelay(0x20000);
++	}
+ 
+-	/* SDRC_ACTIM_CTRLA0 register */
+-	(*(unsigned int *) 0x6D00009c) = 0xa29db4c6; /* for 166M */
++	__raw_writel(0x02584099,	SDRC_MCFG_0 + offset);
++	__raw_writel(0x4e201,		SDRC_RFR_CTRL + offset);
++	__raw_writel(0xaa9db4c6,	SDRC_ACTIM_CTRLA_0 + actim_offs);
++	__raw_writel(0x11517,		SDRC_ACTIM_CTRLB_0 + actim_offs);
+ 
+-	/* SDRC_ACTIM_CTRLB0 register */
+-	(*(unsigned int *) 0x6D0000a0) = 0x12214;    /* for 166M */
++	__raw_writel(CMD_NOP,		SDRC_MANUAL_0 + offset);
++	__raw_writel(CMD_PRECHARGE,	SDRC_MANUAL_0 + offset);
++	__raw_writel(CMD_AUTOREFRESH,	SDRC_MANUAL_0 + offset);
++	__raw_writel(CMD_AUTOREFRESH,	SDRC_MANUAL_0 + offset);
+ 
+-	/* Disble Power Down of CKE cuz of 1 CKE on combo part */
+-	(*(unsigned int *) 0x6D000070) = 0x00000081;
++	/*  CAS latency 3, Write Burst = Read Burst, Serial Mode,
++	    Burst length = 4 */
++	__raw_writel(0x00000032,	SDRC_MR_0 + offset);
+ 
+-	/* SDRC_Manual command register */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000000; /* NOP command */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000001; /* Precharge command */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000002; /* Auto-refresh command */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000002; /* Auto-refresh command */
+-
+-	/* SDRC MR0 register */
+-	(*(int *) 0x6D000084) = 0x00000032;	/*  Burst length = 4 */
+-	/* CAS latency = 3, Write Burst = Read Burst Serial Mode */
+-
+-	/* SDRC DLLA control register */
+-	(*(unsigned int *) 0x6D000060) = 0x0000A;
+-	sdelay(0x20000);
++	if (!mem_ok(offset))
++		__raw_writel(0, SDRC_MCFG_0 + offset);
+ }
+ 
+ void enable_gpmc_config(u32 *gpmc_config, u32 gpmc_base, u32 base, u32 size)
+diff --git a/cpu/omap3/sys_info.c b/cpu/omap3/sys_info.c
+index 12cf5ba..64d9e7e 100644
+--- a/cpu/omap3/sys_info.c
++++ b/cpu/omap3/sys_info.c
+@@ -90,8 +90,11 @@ u32 is_mem_sdr(void)
+  ***********************************************************/
+ u32 get_mem_type(void)
+ {
+-	/* Current SDP3430 uses 2x16 MDDR Infenion parts */
++#ifdef CONFIG_OMAP3_BEAGLE
++	return DDR_STACKED;
++#else
+ 	return DDR_DISCRETE;
++#endif
+ }
+ 
+ /***********************************************************************
+@@ -109,6 +112,22 @@ u32 get_sdr_cs_size(u32 offset)
+ }
+ 
+ /***********************************************************************
++ * get_sdr_cs_offset() - get offset of cs from cs0 start
++ ************************************************************************/
++u32 get_sdr_cs_offset(u32 cs)
++{
++	u32 offset;
++
++	if (!cs)
++		return 0;
++
++	offset = __raw_readl(SDRC_CS_CFG);
++	offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
++
++	return offset;
++}
++
++/***********************************************************************
+  * get_board_type() - get board type based on current production stats.
+  *  - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info.
+  *    when they are available we can get info from there.  This should
+diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h
+index d47defb..df2d150 100644
+--- a/include/asm-arm/arch-omap3/cpu.h
++++ b/include/asm-arm/arch-omap3/cpu.h
+@@ -123,7 +123,6 @@
+ #define SDRC_ACTIM_CTRLA_1	(OMAP34XX_SDRC_BASE+0xC4)
+ #define SDRC_ACTIM_CTRLB_1	(OMAP34XX_SDRC_BASE+0xC8)
+ #define SDRC_RFR_CTRL		(OMAP34XX_SDRC_BASE+0xA4)
+-#define SDRC_RFR_CTRL		(OMAP34XX_SDRC_BASE+0xA4)
+ #define SDRC_MANUAL_0		(OMAP34XX_SDRC_BASE+0xA8)
+ #define OMAP34XX_SDRC_CS0	0x80000000
+ #define OMAP34XX_SDRC_CS1	0xA0000000
+diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h
+index 279bdce..5b0bd9e 100644
+--- a/include/asm-arm/arch-omap3/sys_proto.h
++++ b/include/asm-arm/arch-omap3/sys_proto.h
+@@ -50,6 +50,7 @@ u32 get_gpmc0_width(void);
+ u32 get_board_type(void);
+ void display_board_info(u32);
+ u32 get_sdr_cs_size(u32 offset);
++u32 get_sdr_cs_offset(u32 cs);
+ u32 running_in_sdram(void);
+ u32 running_in_sram(void);
+ u32 running_in_flash(void);
diff --git a/packages/u-boot/u-boot-omap3_git.bb b/packages/u-boot/u-boot-omap3_git.bb
new file mode 100644
index 0000000000..ce7c5b9433
--- /dev/null
+++ b/packages/u-boot/u-boot-omap3_git.bb
@@ -0,0 +1,19 @@
+require u-boot.inc
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/u-boot-omap3-git/${MACHINE}"
+
+SRCREV = "c492706ba046124333323273f6fc21123360cb50"
+
+PV = "2008.10-rc1+${PR}+git${SRCREV}"
+PR="r1"
+
+SRC_URI = "git://www.sakoman.net/git/u-boot-omap3.git;branch=common;protocol=git \
+          "
+
+UBOOT_MACHINE_beagleboard = "omap3_beagle_config"
+UBOOT_MACHINE_omap3evm = "omap3_evm_config"
+UBOOT_MACHINE_overo = "omap3_overo_config"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/packages/u-boot/u-boot_git.bb b/packages/u-boot/u-boot_git.bb
index a887c1641d..6131aa1e3b 100644
--- a/packages/u-boot/u-boot_git.bb
+++ b/packages/u-boot/u-boot_git.bb
@@ -3,19 +3,24 @@ PR="r18"
 
 SRCREV_davinci-sffsdr = "4b50cd12a3b3c644153c4cf393f4a4c12289e5aa"
 SRCREV_davinci-dvevm = "4b50cd12a3b3c644153c4cf393f4a4c12289e5aa"
-SRCREV_beagleboard = "9c1c36409b2cb4e81aab0bd9d0a69c68f4475aae"
+SRCREV_beagleboard = "fb479d0418bc7c15d63a131beedbc6f1970fc295"
+SRCREV_omap3evm = "9c1c36409b2cb4e81aab0bd9d0a69c68f4475aae"
 SRCREV_neuros-osd2 = "df6de5f4ff79dc43ba2a79a3afa975d22ec273b5"
 SRCREV_akita = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee"
 SRCREV_spitz = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee"
 SRCREV_c7x0 = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee"
 
+UBOOT_MACHINE_beagleboard = "omap3_beagle_config"
+UBOOT_MACHINE_omap3evm = "omap3_evm_config"
+UBOOT_MACHINE_overo = "omap3_overo_config"
+
 SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git "
 SRC_URI_sequoia = "git://www.denx.de/git/u-boot.git;protocol=git;tag=cf3b41e0c1111dbb865b6e34e9f3c3d3145a6093 "
 SRC_URI_neuros-osd2 = "git://git.neurostechnology.com/git/u-boot;protocol=git;branch=neuros"
-SRC_URI_beagleboard = "git://www.sakoman.net/git/u-boot-omap3.git;branch=test;protocol=git \
-                       file://name.patch;patch=1 \
-                       file://armv7-a.patch;patch=1 \
-                      "
+SRC_URI_beagleboard = "git://www.sakoman.net/git/u-boot-omap3.git;branch=common;protocol=git \
+                       file://beagle-600MHz.diff;patch=1 \
+		       file://mru-256.diff;patch=1 \
+		       "
 
 SRC_URI_neuros-osd2 += "file://Makefile-fix.patch;patch=1"
 SRC_URI_append_akita = "file://pdaXrom-u-boot.patch;patch=1 \