packages/obsolete/nslu2: dropped all obsolete nslu2 kernels

1 files changed, 0 insertions, 184 deletions

diff --git a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch b/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch
deleted file mode 100644
index 12fdc4d96e..0000000000
--- a/packages/obsolete/nslu2/nslu2-kernel/2.6.15/60-nslu2-beeper.patch
+++ /dev/null
@@ -1,184 +0,0 @@
- drivers/input/misc/Kconfig     |   12 +++
- drivers/input/misc/Makefile    |    1 
- drivers/input/misc/nslu2spkr.c |  148 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 161 insertions(+)
-
---- linux-2.6.15/drivers/input/misc/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
- 	tristate "M68k Beeper support"
- 	depends on M68K
- 
-+config INPUT_NSLU2_BEEPER
-+	tristate "NSLU2 Beeper support"
-+	depends on MACH_NSLU2
-+	help
-+	  Say Y here if you want the embedded beeper on the LinkSys NSLU2
-+	  to be used for bells and whistles.
-+
-+	  If unsure, say Y.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called nslu2spkr.
-+
- config INPUT_UINPUT
- 	tristate "User level driver support"
- 	help
---- linux-2.6.15/drivers/input/misc/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68ksp
- obj-$(CONFIG_INPUT_98SPKR)		+= 98spkr.o
- obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
- obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
-+obj-$(CONFIG_INPUT_NSLU2_BEEPER)	+= nslu2spkr.o
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,148 @@
-+/*
-+ * drivers/input/misc/nslu2spkr.c
-+ *
-+ * NSLU2 Beeper driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ *  Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+
-+static unsigned int beep_on_startup = 1;
-+module_param(beep_on_startup, bool, 0);
-+MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
-+
-+DEFINE_SPINLOCK(beep_lock);
-+
-+static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+	unsigned int count = 0;
-+	unsigned long flags;
-+
-+	if (type != EV_SND)
-+		return -1;
-+
-+	switch (code) {
-+		case SND_BELL:
-+			if (value) value = 1000;
-+		case SND_TONE:
-+			break;
-+		default:
-+			return -1;
-+	}
-+
-+	if (value > 20 && value < 32767)
-+		count = (NSLU2_FREQ / (value*4)) - 1;
-+
-+	spin_lock_irqsave(&beep_lock, flags);
-+
-+	 if (count) {
-+
-+		gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
-+		gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
-+
-+		*IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+
-+	} else {
-+
-+		gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
-+		gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
-+
-+		*IXP4XX_OSRT2 = 0;
-+	}
-+
-+	spin_unlock_irqrestore(&beep_lock, flags);
-+
-+	return 0;
-+}
-+
-+static struct input_dev nslu2_spkr_dev = {
-+	.phys		= "ixp420/gpio4",
-+	.name		= "NSLU2 Beeper",
-+	.evbit[0]	= BIT(EV_SND),
-+	.sndbit[0]	= BIT(SND_BELL) | BIT(SND_TONE),
-+	.event		= nslu2_spkr_event,
-+	.id		= {
-+		.bustype	= BUS_HOST,
-+		.vendor		= 0x001f,
-+		.product	= 0x0001,
-+		.version	= 0x0100
-+	}
-+};
-+
-+static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	/* clear interrupt */
-+	*IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-+
-+	/* flip the beeper output */
-+	*IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_spkr_init(void)
-+{
-+	if (!(machine_is_nslu2()))
-+		return -ENODEV;
-+
-+	if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
-+		SA_INTERRUPT | SA_TIMER, "nslu2-beeper", NULL < 0)) {
-+
-+		printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
-+			IRQ_IXP4XX_TIMER2);
-+
-+		return -EIO;
-+	}
-+
-+	input_register_device(&nslu2_spkr_dev);
-+
-+	/* do a little beep to tell the world we are alive */
-+	if (beep_on_startup)
-+	{
-+		nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
-+		msleep(120);
-+		nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
-+	}
-+
-+        printk(KERN_INFO "NSLU2: beeper\n");
-+	return 0;
-+}
-+
-+static void __exit nslu2_spkr_exit(void)
-+{
-+	input_unregister_device(&nslu2_spkr_dev);
-+
-+	disable_irq(IRQ_IXP4XX_TIMER2);
-+
-+	/* turn it off */
-+	nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
-+
-+	free_irq(IRQ_IXP4XX_TIMER2, NULL);
-+}
-+
-+module_init(nslu2_spkr_init);
-+module_exit(nslu2_spkr_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Beeper driver");
-+MODULE_LICENSE("GPL");