diff options
| author | John Bowler <jbowler@nslu2-linux.org> | 2005-11-14 06:29:32 +0000 |
|---|---|---|
| committer | OpenEmbedded Project <openembedded-devel@lists.openembedded.org> | 2005-11-14 06:29:32 +0000 |
| commit | 15b6993ce68956022af5df22d110898f8b61a252 (patch) | |
| tree | e9b379bbf85d4899847a615ddb67fa9f05451e13 /packages/linux | |
| parent | b36999d27c8d713ae2421c130633a796f4e98f83 (diff) | |
nslu2-kernel: upgrade to 2.6.14.2
nslu2-kernel: add (only semi working) 2.6.15-rc1
Diffstat (limited to 'packages/linux')
18 files changed, 3122 insertions, 3 deletions
diff --git a/packages/linux/nslu2-kernel/2.6.15/.mtn2git_empty b/packages/linux/nslu2-kernel/2.6.15/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/.mtn2git_empty diff --git a/packages/linux/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch b/packages/linux/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch new file mode 100644 index 0000000000..29b048e27a --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/00-memory-h-page-shift.patch @@ -0,0 +1,10 @@ +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/memory.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/memory.h 1970-01-01 00:00:00.000000000 +0000 +@@ -8,6 +8,7 @@ + #define __ASM_ARCH_MEMORY_H + + #include <asm/sizes.h> ++#include <asm/page.h> + + /* + * Physical DRAM offset. diff --git a/packages/linux/nslu2-kernel/2.6.15/01-i2c-ixp4xx.patch b/packages/linux/nslu2-kernel/2.6.15/01-i2c-ixp4xx.patch new file mode 100644 index 0000000000..16426bdee6 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/01-i2c-ixp4xx.patch @@ -0,0 +1,29 @@ +--- linux-2.6.15/drivers/i2c/busses/i2c-ixp4xx.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/i2c/busses/i2c-ixp4xx.c 1970-01-01 00:00:00.000000000 +0000 +@@ -35,7 +35,7 @@ + + #include <asm/hardware.h> /* Pick up IXP4xx-specific bits */ + +-static struct device_driver ixp4xx_i2c_driver; ++static struct platform_driver ixp4xx_i2c_driver; + + static inline int ixp4xx_scl_pin(void *data) + { +@@ -128,7 +128,7 @@ static int ixp4xx_i2c_probe(struct platf + drv_data->algo_data.timeout = 100; + + drv_data->adapter.id = I2C_HW_B_IXP4XX; +- strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name, ++ strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.driver.name, + I2C_NAME_SIZE); + drv_data->adapter.algo_data = &drv_data->algo_data; + +@@ -140,7 +140,7 @@ static int ixp4xx_i2c_probe(struct platf + gpio_line_set(gpio->sda_pin, 0); + + if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) { +- printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id); ++ printk(KERN_ERR "ERROR: Could not install %s\n", ixp4xx_i2c_driver.driver.name); + + kfree(drv_data); + return err; diff --git a/packages/linux/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch b/packages/linux/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch new file mode 100644 index 0000000000..edee083e3c --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/10-mtdpart-redboot-fis-byteswap.patch @@ -0,0 +1,44 @@ +On IXP4XX systems the FIS directory is big endian even with a little +endian kernel. This patch recognises the FIS directory on such a +system and byte swaps it to obtain a valid table based on the 'size' +field of the FIS directory (the size field is know to always match the +erase block size on such systems, and probably all systems.) + +--- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000 +@@ -89,8 +89,34 @@ + i = numslots; + break; + } +- if (!memcmp(buf[i].name, "FIS directory", 14)) ++ if (!memcmp(buf[i].name, "FIS directory", 14)) { ++ /* This is apparently the FIS directory entry for the ++ * FIS directory itself. The FIS directory size is ++ * one erase block, if the buf[i].size field is ++ * swab32(erasesize) then we know we are looking at ++ * a byte swapped FIS directory - swap all the entries! ++ * (NOTE: this is 'size' not 'data_length', size is ++ * the full size of the entry.) ++ */ ++ if (swab32(buf[i].size) == master->erasesize) { ++ int j; ++ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { ++ /* The unsigned long fields were written with the ++ * wrong byte sex, name and pad have no byte sex. ++ */ ++# define do_swab32(x) (x) = swab32(x) ++ do_swab32(buf[j].flash_base); ++ do_swab32(buf[j].mem_base); ++ do_swab32(buf[j].size); ++ do_swab32(buf[j].entry_point); ++ do_swab32(buf[j].data_length); ++ do_swab32(buf[j].desc_cksum); ++ do_swab32(buf[j].file_cksum); ++# undef do_swab32 ++ } ++ } + break; ++ } + } + if (i == numslots) { + /* Didn't find it */ diff --git a/packages/linux/nslu2-kernel/2.6.15/19-jffs2-force-be.patch b/packages/linux/nslu2-kernel/2.6.15/19-jffs2-force-be.patch new file mode 100644 index 0000000000..09379031dd --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/19-jffs2-force-be.patch @@ -0,0 +1,13 @@ +--- linux-2.6.15/fs/jffs2/nodelist.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/fs/jffs2/nodelist.h 1970-01-01 00:00:00.000000000 +0000 +@@ -44,7 +44,9 @@ + #define D2(x) + #endif + +-#define JFFS2_NATIVE_ENDIAN ++#undef JFFS2_NATIVE_ENDIAN ++#define JFFS2_BIG_ENDIAN 1 ++#undef JFFS2_LITTLE_ENDIAN + + /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from + whatever OS we're actually running on here too. */ diff --git a/packages/linux/nslu2-kernel/2.6.15/20-timer.patch b/packages/linux/nslu2-kernel/2.6.15/20-timer.patch new file mode 100644 index 0000000000..f829fc8db7 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/20-timer.patch @@ -0,0 +1,16 @@ +diff -urN linux-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h nslu2-2.6.13.1/include/asm-arm/arch-ixp4xx/timex.h +--- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000 +@@ -9,7 +9,12 @@ + * We use IXP425 General purpose timer for our timer needs, it runs at + * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the + * timer register ignores the bottom 2 bits of the LATCH value. ++ * The NSLU2 has a 33.00MHz crystal, so a different FREQ is required. + */ ++#ifdef CONFIG_MACH_NSLU2 ++#define FREQ 66000000 ++#else + #define FREQ 66666666 ++#endif + #define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) + diff --git a/packages/linux/nslu2-kernel/2.6.15/55-rtc-x1205.patch b/packages/linux/nslu2-kernel/2.6.15/55-rtc-x1205.patch new file mode 100644 index 0000000000..70befe5fe4 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/55-rtc-x1205.patch @@ -0,0 +1,193 @@ + drivers/char/Kconfig | 4 + + drivers/char/Makefile | 1 + drivers/char/x1205-rtc.c | 162 +++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 167 insertions(+) + +--- linux-2.6.15/drivers/char/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/char/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -783,6 +783,10 @@ config RTC_VR41XX + tristate "NEC VR4100 series Real Time Clock Support" + depends on CPU_VR41XX + ++config RTC_X1205 ++ tristate "X1205 I2C RTC Support" ++ depends on I2C && RTC_X1205_I2C ++ + config COBALT_LCD + bool "Support for Cobalt LCD" + depends on MIPS_COBALT +--- linux-2.6.15/drivers/char/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/char/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -65,6 +65,7 @@ obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o + obj-$(CONFIG_DS1302) += ds1302.o + obj-$(CONFIG_S3C2410_RTC) += s3c2410-rtc.o + obj-$(CONFIG_RTC_VR41XX) += vr41xx_rtc.o ++obj-$(CONFIG_RTC_X1205) += x1205-rtc.o + ifeq ($(CONFIG_GENERIC_NVRAM),y) + obj-$(CONFIG_NVRAM) += generic_nvram.o + else +--- linux-2.6.15/drivers/char/x1205-rtc.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/char/x1205-rtc.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,162 @@ ++/* ++ * drivers/char/x1205-rtc.c ++ * ++ * NSLU2 RTC driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on the original X1205 NSLU2 driver ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/device.h> ++#include <linux/time.h> ++#include <linux/rtc.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++ ++#include <linux/i2c.h> ++#include <linux/x1205.h> ++ ++#include <asm/rtc.h> ++ ++#define DRV_VERSION "0.9" ++ ++extern int (*set_rtc)(void); ++ ++static int x1205_set_rtc(void) ++{ ++ int err; ++ ++ struct rtc_time new_tm, old_tm; ++ unsigned long cur_secs = xtime.tv_sec; ++ ++ if ((err = x1205_do_command(X1205_CMD_GETDATETIME, &old_tm) == 0)) ++ return err; ++ ++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */ ++ new_tm.tm_sec = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_min = cur_secs % 60; ++ cur_secs /= 60; ++ new_tm.tm_hour = cur_secs % 24; ++ ++ /* ++ * avoid writing when we're going to change the day ++ * of the month. We will retry in the next minute. ++ * This basically means that if the RTC must not drift ++ * by more than 1 minute in 11 minutes. ++ */ ++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) || ++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59)) ++ return 1; ++ ++ return x1205_do_command(X1205_CMD_SETTIME, &new_tm); ++} ++ ++static int x1205_rtc_read_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time); ++} ++ ++static int x1205_rtc_set_alarm(struct rtc_wkalrm *alrm) ++{ ++ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time); ++} ++ ++static int x1205_rtc_read_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_GETDATETIME, tm); ++} ++ ++static int x1205_rtc_set_time(struct rtc_time *tm) ++{ ++ return x1205_do_command(X1205_CMD_SETDATETIME, tm); ++} ++ ++static int x1205_rtc_proc(char *buf) ++{ ++ int err, dtrim, atrim; ++ char *p = buf; ++ ++ p += sprintf(p, "24hr\t\t: yes\n"); ++ ++ err = x1205_do_command(X1205_CMD_GETDTRIM, &dtrim); ++ if (err == 0) ++ p += sprintf(p, "digital_trim\t: %d ppm\n", dtrim); ++ ++ err = x1205_do_command(X1205_CMD_GETATRIM, &atrim); ++ if (err == 0) ++ p += sprintf(p, "analog_trim\t: %d.%02d pF\n", ++ atrim / 1000, atrim % 1000); ++ ++ return p - buf; ++} ++ ++static struct rtc_ops x1205_rtc_ops = { ++ .owner = THIS_MODULE, ++ .proc = x1205_rtc_proc, ++ .read_time = x1205_rtc_read_time, ++ .set_time = x1205_rtc_set_time, ++ .read_alarm = x1205_rtc_read_alarm, ++ .set_alarm = x1205_rtc_set_alarm, ++}; ++ ++static int x1205_rtc_probe(struct device *dev) ++{ ++ int ret; ++ ++ if ((ret = register_rtc(&x1205_rtc_ops)) != 0) ++ return ret; ++ ++ set_rtc = x1205_set_rtc; ++ ++ printk(KERN_INFO "x1205-rtc: real time clock\n"); ++ ++ return 0; ++} ++ ++static int x1205_rtc_remove(struct device *dev) ++{ ++ set_rtc = NULL; ++ ++ unregister_rtc(&x1205_rtc_ops); ++ ++ return 0; ++} ++ ++static struct device_driver x1205_rtc_driver = { ++ .name = "x1205-rtc", ++ .bus = &platform_bus_type, ++ .probe = x1205_rtc_probe, ++ .remove = x1205_rtc_remove, ++}; ++ ++static int __init x1205_rtc_init(void) ++{ ++ return driver_register(&x1205_rtc_driver); ++} ++ ++static void __exit x1205_rtc_exit(void) ++{ ++ driver_unregister(&x1205_rtc_driver); ++} ++ ++module_init(x1205_rtc_init); ++module_exit(x1205_rtc_exit); ++ ++MODULE_AUTHOR( ++ "Karen Spearel <kas11@tampabay.rr.com>, " ++ "Alessandro Zummo <a.zummo@towertech.it>"); ++MODULE_DESCRIPTION("Xicor X1205 RTC platform driver"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_VERSION); diff --git a/packages/linux/nslu2-kernel/2.6.15/60-nslu2-beeper.patch b/packages/linux/nslu2-kernel/2.6.15/60-nslu2-beeper.patch new file mode 100644 index 0000000000..12fdc4d96e --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/60-nslu2-beeper.patch @@ -0,0 +1,184 @@ + drivers/input/misc/Kconfig | 12 +++ + drivers/input/misc/Makefile | 1 + drivers/input/misc/nslu2spkr.c | 148 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 161 insertions(+) + +--- linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP + tristate "M68k Beeper support" + depends on M68K + ++config INPUT_NSLU2_BEEPER ++ tristate "NSLU2 Beeper support" ++ depends on MACH_NSLU2 ++ help ++ Say Y here if you want the embedded beeper on the LinkSys NSLU2 ++ to be used for bells and whistles. ++ ++ If unsure, say Y. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called nslu2spkr. ++ + config INPUT_UINPUT + tristate "User level driver support" + help +--- linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp + obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o + obj-$(CONFIG_INPUT_UINPUT) += uinput.o + obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o ++obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o +--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,148 @@ ++/* ++ * drivers/input/misc/nslu2spkr.c ++ * ++ * NSLU2 Beeper driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/input.h> ++#include <linux/delay.h> ++ ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/mach-types.h> ++ ++static unsigned int beep_on_startup = 1; ++module_param(beep_on_startup, bool, 0); ++MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup"); ++ ++DEFINE_SPINLOCK(beep_lock); ++ ++static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) ++{ ++ unsigned int count = 0; ++ unsigned long flags; ++ ++ if (type != EV_SND) ++ return -1; ++ ++ switch (code) { ++ case SND_BELL: ++ if (value) value = 1000; ++ case SND_TONE: ++ break; ++ default: ++ return -1; ++ } ++ ++ if (value > 20 && value < 32767) ++ count = (NSLU2_FREQ / (value*4)) - 1; ++ ++ spin_lock_irqsave(&beep_lock, flags); ++ ++ if (count) { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW); ++ ++ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE; ++ ++ } else { ++ ++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN); ++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH); ++ ++ *IXP4XX_OSRT2 = 0; ++ } ++ ++ spin_unlock_irqrestore(&beep_lock, flags); ++ ++ return 0; ++} ++ ++static struct input_dev nslu2_spkr_dev = { ++ .phys = "ixp420/gpio4", ++ .name = "NSLU2 Beeper", ++ .evbit[0] = BIT(EV_SND), ++ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE), ++ .event = nslu2_spkr_event, ++ .id = { ++ .bustype = BUS_HOST, ++ .vendor = 0x001f, ++ .product = 0x0001, ++ .version = 0x0100 ++ } ++}; ++ ++static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ /* clear interrupt */ ++ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; ++ ++ /* flip the beeper output */ ++ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM; ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init nslu2_spkr_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return -ENODEV; ++ ++ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler, ++ SA_INTERRUPT | SA_TIMER, "nslu2-beeper", NULL < 0)) { ++ ++ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n", ++ IRQ_IXP4XX_TIMER2); ++ ++ return -EIO; ++ } ++ ++ input_register_device(&nslu2_spkr_dev); ++ ++ /* do a little beep to tell the world we are alive */ ++ if (beep_on_startup) ++ { ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440); ++ msleep(120); ++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0); ++ } ++ ++ printk(KERN_INFO "NSLU2: beeper\n"); ++ return 0; ++} ++ ++static void __exit nslu2_spkr_exit(void) ++{ ++ input_unregister_device(&nslu2_spkr_dev); ++ ++ disable_irq(IRQ_IXP4XX_TIMER2); ++ ++ /* turn it off */ ++ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0); ++ ++ free_irq(IRQ_IXP4XX_TIMER2, NULL); ++} ++ ++module_init(nslu2_spkr_init); ++module_exit(nslu2_spkr_exit); ++ ++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); ++MODULE_DESCRIPTION("NSLU2 Beeper driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/linux/nslu2-kernel/2.6.15/60-nslu2-rtc.patch b/packages/linux/nslu2-kernel/2.6.15/60-nslu2-rtc.patch new file mode 100644 index 0000000000..9e390c6b7a --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/60-nslu2-rtc.patch @@ -0,0 +1,21 @@ + arch/arm/mach-ixp4xx/nslu2-setup.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000 +@@ -95,10 +95,15 @@ static struct platform_device nslu2_uart + .resource = nslu2_uart_resources, + }; + ++static struct platform_device nslu2_rtc = { ++ .name = "x1205-rtc", ++}; ++ + static struct platform_device *nslu2_devices[] __initdata = { + &nslu2_i2c_controller, + &nslu2_flash, + &nslu2_uart, ++ &nslu2_rtc, + }; + + static void nslu2_power_off(void) diff --git a/packages/linux/nslu2-kernel/2.6.15/75-nslu2-leds.patch b/packages/linux/nslu2-kernel/2.6.15/75-nslu2-leds.patch new file mode 100644 index 0000000000..7497409e77 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/75-nslu2-leds.patch @@ -0,0 +1,272 @@ + arch/arm/Kconfig | 8 - + arch/arm/mach-ixp4xx/Makefile | 4 + arch/arm/mach-ixp4xx/nslu2-leds.c | 223 ++++++++++++++++++++++++++++++++++++++ + 3 files changed, 232 insertions(+), 3 deletions(-) + +--- linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000 +@@ -418,7 +418,8 @@ config LEDS + ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ + ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ + ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ +- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE ++ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ++ MACH_NSLU2 + help + If you say Y here, the LEDs on your machine will be used + to provide useful information about your current system status. +@@ -432,7 +433,7 @@ config LEDS + + config LEDS_TIMER + bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ +- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2 + depends on LEDS + default y if ARCH_EBSA110 + help +@@ -448,7 +449,8 @@ config LEDS_TIMER + + config LEDS_CPU + bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ +- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 ++ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \ ++ || MACH_NSLU2 + depends on LEDS + help + If you say Y here, the red LED will be used to give a good real +--- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote- + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o + obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o + ++leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o ++obj-$(CONFIG_LEDS) += $(leds-y) ++ ++ +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,223 @@ ++/* ++ * arch/arm/mach-ixp4xx/nslu2-leds.c ++ * ++ * NSLU2 LEDs driver ++ * ++ * Copyright (C) 2005 Tower Technologies ++ * ++ * based on nslu2-io.c ++ * Copyright (C) 2004 Karen Spearel ++ * and arch/arm/mach-footbridge/netwinder-leds.c ++ * Copyright (C) 1998-1999 Russell King ++ * ++ * Author: Alessandro Zummo <a.zummo@towertech.it> ++ * Maintainers: http://www.nslu2-linux.org/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/spinlock.h> ++#include <linux/notifier.h> ++ ++#include <asm/hardware.h> ++#include <asm/leds.h> ++#include <asm/mach-types.h> ++#include <asm/system.h> ++ ++#define LED_STATE_ENABLED 0x01 ++#define LED_STATE_CLAIMED 0x02 ++#define LED_STATE_IDLE 0x04 ++ ++static unsigned char led_state; ++static unsigned int hw_led_state; ++ ++#ifdef CONFIG_LEDS_TIMER ++static const unsigned long idle_seq[4] = { ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM, 0, ++}; ++ ++static const unsigned long busy_seq[4] = { ++ NSLU2_LED_GRN_BM, 0, ++ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0, ++}; ++#endif ++ ++static unsigned char led_count = 0; ++ ++static DEFINE_SPINLOCK(leds_lock); ++extern spinlock_t gpio_lock; ++ ++static void nslu2_leds_event(led_event_t evt) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&leds_lock, flags); ++ ++ switch (evt) { ++ case led_start: ++ /* Let's rock! Red led on, all others off. Remember ++ * that disk1/disk2 works inverted. ++ */ ++ led_state = LED_STATE_ENABLED; ++ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM ++ | NSLU2_LED_RED_BM; ++ break; ++ ++ case led_stop: ++ led_state &= ~LED_STATE_ENABLED; ++ break; ++ ++ case led_claim: ++ /* The user claimed the interface, red and green off */ ++ led_state |= LED_STATE_CLAIMED; ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_release: ++ /* The user released the interface, preserve the last ++ * status of the leds, except red/green. ++ */ ++ led_state &= ~LED_STATE_CLAIMED; ++ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C; ++ break; ++ ++#ifdef CONFIG_LEDS_TIMER ++ case led_timer: ++ /* Pulse green led */ ++ if (!(led_state & LED_STATE_CLAIMED)) ++ { ++ /* clear red and green bits */ ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ ++ /* copy the right sequence in */ ++ if (led_state & LED_STATE_IDLE) ++ hw_led_state |= idle_seq[led_count % 4]; ++ else ++ hw_led_state |= busy_seq[led_count % 4]; ++ ++ led_count++; ++ } ++ break; ++#endif ++ ++#ifdef CONFIG_LEDS_CPU ++ case led_idle_start: ++ led_state |= LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red off */ ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++#endif ++ break; ++ ++ case led_idle_end: ++ led_state &= ~LED_STATE_IDLE; ++#ifndef CONFIG_LEDS_TIMER ++ /* green on, red on -> amber on */ ++ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM; ++#endif ++ break; ++#endif /* CONFIG_LEDS_CPU */ ++ ++ case led_halted: ++ if (!(led_state & LED_STATE_CLAIMED)) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ /* leds */ ++ ++ case led_green_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_green_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_GRN_BM; ++ break; ++ ++ case led_amber_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_amber_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM); ++ break; ++ ++ case led_red_on: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state |= NSLU2_LED_RED_BM; ++ break; ++ ++ case led_red_off: ++ if (led_state & LED_STATE_CLAIMED) ++ hw_led_state &= ~NSLU2_LED_RED_BM; ++ break; ++ ++ default: ++ break; ++ } ++ ++ spin_unlock_irqrestore(&leds_lock, flags); ++ ++ if (led_state & LED_STATE_ENABLED) { ++ spin_lock_irqsave(&gpio_lock, flags); ++ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state; ++ spin_unlock_irqrestore(&gpio_lock, flags); ++ } ++} ++ ++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event, ++ void *ptr) ++{ ++#ifdef CONFIG_LEDS_TIMER ++ leds_event(led_claim); ++#endif ++ leds_event(led_green_off); ++ leds_event(led_red_on); ++ ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block nslu2_leds_panic_block = { ++ .notifier_call = nslu2_leds_panic_event, ++}; ++ ++static int __init nslu2_leds_init(void) ++{ ++ if (!(machine_is_nslu2())) ++ return 0; ++ ++ printk(KERN_INFO "NSLU2: leds\n"); ++ ++ /* register panic notifier */ ++ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block); ++ ++ /* enable gpio 0-3 */ ++ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT); ++ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT); ++ ++ leds_event = nslu2_leds_event; ++ ++ /* this will also initialize the leds to the ++ * default state. ++ */ ++ ++ leds_event(led_start); ++ ++ return 0; ++} ++ ++module_init(nslu2_leds_init); diff --git a/packages/linux/nslu2-kernel/2.6.15/80-nslu2-io.patch b/packages/linux/nslu2-kernel/2.6.15/80-nslu2-io.patch new file mode 100644 index 0000000000..0b90c486e3 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/80-nslu2-io.patch @@ -0,0 +1,560 @@ +--- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc + obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o + obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o +-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o ++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-io.o + +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,548 @@ ++//============================================================================= ++// ++// n2-io.c version 0.1.7 ++// Author: Karen Spearel <kas11 at tampabay.rr.com> ++// please report problems/bugs directly to the address above ++// ++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per ++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk ++// ++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD, ++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT ++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER ++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS. ++// ++//============================================================================= ++// GPIO Function State ++// 0 Red LED Status ++// 1 Green LED Ready = 1 ++// 2 Disk 2 LED On = 0 ++// 3 Disk 1 LED On = 0 ++// 4 Buzzer ++// 5 Power Button Pressed = 1 ++// 8 Power Down Output = 1 powers down NSLU2 ++// 12 Reset Pressed = 0 ++ ++#include <linux/config.h> ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/proc_fs.h> ++#include <linux/device.h> ++#include <linux/reboot.h> ++ ++#include <asm/uaccess.h> ++#include <asm-arm/irq.h> ++#include <asm-arm/delay.h> ++ ++/* Set this to 1 to output lots of debug messages. */ ++#define NSLU2_IO_DEBUG 0 ++ ++#if NSLU2_IO_DEBUG ++#define nslu2_io_debug(args) printk args ++#else ++#define nslu2_io_debug(args) ((void)0) ++#endif ++ ++#define VERSION "0.1.7" ++ ++#define NSLU2BZ_MAJOR 62 //buzzer ++#define NSLU2LM_MAJOR 126 ++ ++ ++#define NSLU2_BEEP_DUR_LONG 2000 ++#define NSLU2_BEEP_DUR_MED 400 ++#define NSLU2_BEEP_DUR_SHORT 100 ++#define NSLU2_BEEP_PITCH_HIGH 250 ++#define NSLU2_BEEP_PITCH_MED 500 ++#define NSLU2_BEEP_PITCH_LOW 1000 ++#define NSLU2_LONG_DELAY 30000 ++ ++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) ++ ++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe ++ ++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible ++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults ++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults ++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000 ++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies ++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies ++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever ++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long ++ ++#define NSLU2LM_OFF _IOW('M',32,long) ++#define NSLU2LM_ON _IOW('M',33,long) ++#define NSLU2LM_BLINK _IOW('M',34,long) ++#define NSLU2LM_ALT _IOW('M',35,long) ++#define NSLU2LM_ALL_ON _IO('M',36) ++#define NSLU2LM_ALL_OFF _IO('M',37) ++ ++#define PHYS_LEDS 4 ++#define BLINK_DELAY 25 ++ ++// OR Masks to turn these LEDs ON ++ ++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010 ++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001 ++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011 ++ ++// AND Masks to turn these LEDs OFF ++ ++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101 ++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110 ++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100 ++ ++// AND Masks to turn these LEDs ON ++ ++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111 ++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011 ++ ++// Or Masks to turn these LEDs OFF ++ ++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000 ++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100 ++ ++// EOR masks for toggling LEDs on/off ++ ++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits ++#define RS_GRN_TGL 0x00000002 ++#define RS_RED_TGL 0x00000001 ++#define DISK1_TGL 0x00000008 ++#define DISK2_TGL 0x00000004 ++ ++// The LED names for switches ++ ++#define LED_RS_RED 0 ++#define LED_RS_GRN 1 ++#define LED_DISK1 2 ++#define LED_DISK2 3 ++#define LED_ALL 4 ++ ++static unsigned long ontime = 50; ++static unsigned long offtime = 450; ++static unsigned long bz_repeatcnt = 10; ++static unsigned long tone = 1000; ++ ++static struct timer_list n2lm_rsg_timer; //rs green ++static struct timer_list n2lm_rsr_timer; //rs red ++static struct timer_list n2lm_d1_timer; //drive 1 ++static struct timer_list n2lm_d2_timer; //drive 2 ++static struct timer_list n2bz_timer; //beeper ++ ++// sysfs class ++static struct class *n2lm_class; ++ ++//================================================================================================== ++// ++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the ++// GPIO output register is xor'd with a mask corresponding to the selected led which simply ++// flips that bit. No record of what any of the other leds is doing is needed. ++// ++//================================================================================================== ++// this blinks rs green or green/yellow if rs red is on ++#ifndef CONFIG_LEDS ++static void n2lm_rsg_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout ++ add_timer(&n2lm_rsg_timer); //reinit timer ++ return; ++} ++ ++// this blinks or alternates rs red green... inited wit green on/red off ++static void n2lm_rsr_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data; ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ return; ++} ++// blinks disk 1 ++static void n2lm_d1_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL; ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ return; ++} ++// blinks disk 2 ++static void n2lm_d2_handler(unsigned long data) ++{ ++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL; ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_start(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led)); ++ ++ switch(led) { ++ case LED_RS_RED: ++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsr_timer); ++ break; ++ ++ case LED_RS_GRN: ++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_rsg_timer); ++ break; ++ ++ case LED_DISK1: ++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d1_timer); ++ break; ++ ++ case LED_DISK2: ++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY; ++ add_timer(&n2lm_d2_timer); ++ break; ++ ++ default: ++ break; ++ } ++ return; ++} ++ ++//================================================================================================== ++ ++static void n2lm_timer_stop(unsigned long led) ++{ ++ switch (led) { ++ case LED_RS_RED: ++ del_timer(&n2lm_rsr_timer); ++ break; ++ case LED_RS_GRN: ++ del_timer(&n2lm_rsg_timer); ++ break; ++ case LED_DISK1: ++ del_timer(&n2lm_d1_timer); ++ break; ++ case LED_DISK2: ++ del_timer(&n2lm_d2_timer); ++ break; ++ default: ++ break; ++ } ++ return; ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_timer_stop_all(void) ++{ ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ return; ++} ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledon(unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led)); ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1 ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2 ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb ++ return; ++ case LED_ALL: //all green ++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; ++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON); ++ return; ++ } ++} ++ ++//-------------------------------------------------------------------------------------------------- ++ ++static void n2lm_ledoff(unsigned long led) ++{ ++ ++ switch (led) { ++ case LED_RS_RED: ++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe ++ return; ++ case LED_RS_GRN: ++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd ++ return; ++ case LED_DISK1: ++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008 ++ return; ++ case LED_DISK2: ++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004 ++ return; ++ case LED_ALL: ++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF); ++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF); ++ } ++} ++ ++//================================================================================================== ++ ++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led) ++{ ++ ++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led)); ++ ++ if (led < 0 || led >= PHYS_LEDS) ++ return -EINVAL; ++ ++ switch (cmd ) { ++ case NSLU2LM_ON: ++ n2lm_timer_stop(led); ++ n2lm_ledon(led); ++ break; ++ ++ case NSLU2LM_OFF: ++ n2lm_timer_stop(led); ++ n2lm_ledoff(led); ++ break; ++ ++ case NSLU2LM_BLINK: ++ n2lm_ledon(led); ++ if (led == LED_RS_RED) ++ n2lm_rsr_timer.data = RS_RED_TGL; ++ n2lm_timer_start(led); ++ break; ++ ++ case NSLU2LM_ALT: ++ if (led == LED_RS_RED) ++ { ++ n2lm_ledon(LED_RS_GRN); ++ n2lm_ledoff(LED_RS_RED); ++ n2lm_rsr_timer.data = RS_RG_ALT; ++ n2lm_timer_start(LED_RS_RED); ++ break; ++ } else ++ return -EINVAL; ++ ++ case NSLU2LM_ALL_ON: ++ n2lm_timer_stop_all(); ++ n2lm_ledon(LED_ALL); ++ break; ++ ++ case NSLU2LM_ALL_OFF: ++ n2lm_timer_stop_all(); ++ n2lm_ledoff(LED_ALL); ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static struct file_operations n2lm_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2lm_ioctl, ++}; ++#endif ++//================================================================================================== ++// We can't do anything fancy here since the system tick rate is far below that required to ++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until ++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing ++// important should be haprepening. ++//================================================================================================== ++ ++static void n2_buzz(int tone_delay, int duration) ++{ ++ int i; ++ ++ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM; ++ ++ for (i = 1; i < duration; i++) { ++ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM; ++ udelay(tone_delay); ++ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM; ++ udelay(tone_delay); ++ } ++ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM; ++ ++ return; ++} ++//================================================================================================= ++ ++// this handles the buzzer duty cycle ++static void n2bz_handler(unsigned long data) ++{ ++ if (--bz_repeatcnt > 0) { //if just one beep left to do ++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout ++ add_timer(&n2bz_timer); //reinit timer ++ } ++ n2_buzz(tone/2, ontime); ++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime)); ++ return; ++} ++ ++//================================================================================================== ++ ++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param) ++{ ++ switch (cmd) { ++ case NSLU2BZ_BEEP: ++ n2_buzz(tone/2, ontime); ++ break; ++ ++ case NSLU2BZ_BEEP_STOP: ++ del_timer(&n2bz_timer); ++ break; ++ ++ case NSLU2BZ_BEEPS: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ n2bz_handler(0); ++ break; ++ ++ case NSLU2BZ_TONESET: ++ if (param >= 250 && param <= 2000) ++ tone = param; ++ break; ++ ++ case NSLU2BZ_ONTIME: ++ if (param > 4 && param < 201) ++ ontime = param; ++ break; ++ ++ case NSLU2BZ_SILENTTIME: ++ if (param > ontime) //enforce a reasonable duty cycle ++ offtime = param; ++ else ++ offtime = ontime; ++ break; ++ ++ case NSLU2BZ_REPEATCNT: ++ if (param == 0) ++ bz_repeatcnt = 0xffffffff; ++ else ++ bz_repeatcnt = param; ++ break; ++ ++ case NSLU2BZ_COMBINED: ++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16 ++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies ++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies ++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16 ++ break; ++ ++ default: ++ break; ++ } ++ return 0; ++} ++ ++static struct file_operations n2bz_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = n2bz_ioctl, ++}; ++ ++static void n2iom_initarch(void) ++{ ++#ifndef CONFIG_LEDS ++ init_timer(&n2lm_rsg_timer); ++ init_timer(&n2lm_rsr_timer); ++ init_timer(&n2lm_d1_timer); ++ init_timer(&n2lm_d2_timer); ++ ++ n2lm_rsr_timer.function = n2lm_rsr_handler; ++ n2lm_rsg_timer.function = n2lm_rsg_handler; ++ n2lm_d2_timer.function = n2lm_d2_handler; ++ n2lm_d1_timer.function = n2lm_d1_handler; ++#endif ++ ++ init_timer(&n2bz_timer); ++ n2bz_timer.function = n2bz_handler; ++ ++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0; ++ ++#ifndef CONFIG_LEDS ++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3 ++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds ++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc; ++ n2lm_ledon(LED_ALL); ++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT); ++ n2lm_ledoff(LED_ALL); ++ ++ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit ++ n2lm_ledon(LED_RS_RED); ++#endif ++ ++ return; ++} ++ ++//================================================================================================== ++ ++static int __init n2iom_init(void) ++{ ++ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION); ++ ++ n2iom_initarch(); ++ ++ n2lm_class = class_create(THIS_MODULE, "nslu2"); ++ ++#ifndef CONFIG_LEDS ++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) { ++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ } ++#endif ++ ++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) { ++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR); ++ return -EBUSY; ++ } ++ else { ++ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ } ++ ++ return 0; ++} ++ ++//================================================================================================== ++ ++static void __exit n2iom_exit(void) ++{ ++ ++#ifndef CONFIG_LEDS ++ del_timer(&n2lm_rsg_timer); ++ del_timer(&n2lm_rsr_timer); ++ del_timer(&n2lm_d1_timer); ++ del_timer(&n2lm_d2_timer); ++ ++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" ); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0)); ++#endif ++ ++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz"); ++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0)); ++ ++ class_destroy(n2lm_class); ++} ++ ++module_init(n2iom_init); ++module_exit(n2iom_exit); ++ ++MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>"); ++MODULE_DESCRIPTION("NSLU2 I/O driver"); ++MODULE_LICENSE("GPL"); diff --git a/packages/linux/nslu2-kernel/2.6.15/81-nslu2-class-device-create.patch b/packages/linux/nslu2-kernel/2.6.15/81-nslu2-class-device-create.patch new file mode 100644 index 0000000000..cc33222d91 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/81-nslu2-class-device-create.patch @@ -0,0 +1,20 @@ +--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000 +@@ -504,7 +504,7 @@ static int __init n2iom_init(void) + return -EBUSY; + } + else { +- class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds"); + } + #endif + +@@ -513,7 +513,7 @@ static int __init n2iom_init(void) + return -EBUSY; + } + else { +- class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); ++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer"); + } + + return 0; diff --git a/packages/linux/nslu2-kernel/2.6.15/defconfig b/packages/linux/nslu2-kernel/2.6.15/defconfig new file mode 100644 index 0000000000..3d7c7fbd14 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/defconfig @@ -0,0 +1,1588 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15 +# Sun Nov 13 21:46:15 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +CONFIG_ARCH_IXP4XX=y +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP4xx Implementation Options +# + +# +# IXP4xx Platforms +# +CONFIG_MACH_NSLU2=y +# CONFIG_ARCH_AVILA is not set +# CONFIG_ARCH_ADI_COYOTE is not set +# CONFIG_ARCH_IXDP425 is not set +# CONFIG_MACH_IXDPG425 is not set +# CONFIG_MACH_IXDP465 is not set +# CONFIG_ARCH_PRPMC1100 is not set +# CONFIG_MACH_GTWX5715 is not set + +# +# IXP4xx Options +# +CONFIG_IXP4XX_INDIRECT_PCI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y +CONFIG_DMABOUNCE=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_PHYSDEV=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=y +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=m +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP4XX=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=10240 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=m + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_NSLU2_BEEPER=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP4XX_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +CONFIG_RTC_X1205=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_IOP3XX is not set +CONFIG_I2C_IXP4XX=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_RTC_X1205_I2C=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +CONFIG_VIDEO_BT848=m +# CONFIG_VIDEO_SAA6588 is not set +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_TUNER_3036=m +CONFIG_VIDEO_STRADIS=m +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_MXB=m +CONFIG_VIDEO_DPC=m +CONFIG_VIDEO_HEXIUM_ORION=m +CONFIG_VIDEO_HEXIUM_GEMINI=m +CONFIG_VIDEO_CX88=m +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_OVCAMCHIP=m + +# +# Radio Adapters +# +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_VIDEO_VIDEOBUF=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_BUF=m +CONFIG_VIDEO_BTCX=m +CONFIG_VIDEO_IR=m +CONFIG_VIDEO_TVEEPROM=m + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_PWC=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/nslu2-kernel/2.6.15/mtd-little-endian-support b/packages/linux/nslu2-kernel/2.6.15/mtd-little-endian-support new file mode 100644 index 0000000000..7dff4a2a77 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/mtd-little-endian-support @@ -0,0 +1,94 @@ +diff -u linux-2.6-working/drivers/mtd/maps/ixp4xx.c linux-2.6-working/drivers/mtd/maps/ixp4xx.c +--- linux-2.6.15/drivers/mtd/maps/ixp4xx.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/mtd/maps/ixp4xx.c 1970-01-01 00:00:00.000000000 +0000 +@@ -30,18 +30,42 @@ + + #include <linux/reboot.h> + +-#ifndef __ARMEB__ +-#define BYTE0(h) ((h) & 0xFF) +-#define BYTE1(h) (((h) >> 8) & 0xFF) +-#else + #define BYTE0(h) (((h) >> 8) & 0xFF) + #define BYTE1(h) ((h) & 0xFF) ++ ++/* ++ * Read/write a 16 bit word from flash address 'addr'. ++ * ++ * When the cpu is in little-endian mode it swizzles the address lines ++ * ('address coherency') so we need to undo the swizzling to ensure commands ++ * and the like end up on the correct flash address. ++ */ ++#ifndef __ARMEB__ ++static inline u16 flash_read16(void __iomem *addr) ++{ ++ return le16_to_cpu(readw((void __iomem *)((unsigned long)addr ^ 0x2))); ++} ++ ++static inline void flash_write16(u16 d, void __iomem *addr) ++{ ++ writew(cpu_to_le16(d), (void __iomem *)((unsigned long)addr ^ 0x2)); ++} ++#else ++static inline u16 flash_read16(void __iomem *addr) ++{ ++ return le16_to_cpu(readw(addr)); ++} ++ ++static inline void flash_write16(u16 d, void __iomem *addr) ++{ ++ writew(cpu_to_le16(d), addr); ++} + #endif + + static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) + { + map_word val; +- val.x[0] = le16_to_cpu(readw(map->virt + ofs)); ++ val.x[0] = flash_read16(map->virt + ofs); + return val; + } + +@@ -60,13 +84,13 @@ + return; + + if (from & 1) { +- *dest++ = BYTE1(le16_to_cpu(readw(src))); ++ *dest++ = BYTE1(flash_read16(src)); + src++; + --len; + } + + while (len >= 2) { +- u16 data = le16_to_cpu(readw(src)); ++ u16 data = flash_read16(src); + *dest++ = BYTE0(data); + *dest++ = BYTE1(data); + src += 2; +@@ -74,7 +98,7 @@ + } + + if (len > 0) +- *dest++ = BYTE0(le16_to_cpu(readw(src))); ++ *dest++ = BYTE0(flash_read16(src)); + } + + /* +@@ -84,7 +108,7 @@ + static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) + { + if (!(adr & 1)) +- writew(cpu_to_le16(d.x[0]), map->virt + adr); ++ flash_write16(d.x[0], map->virt + adr); + } + + /* +@@ -92,7 +116,7 @@ + */ + static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) + { +- writew(cpu_to_le16(d.x[0]), map->virt + adr); ++ flash_write16(d.x[0], map->virt + adr); + } + + struct ixp4xx_flash_info { diff --git a/packages/linux/nslu2-kernel/2.6.15/mtd-unaligned-read-fix b/packages/linux/nslu2-kernel/2.6.15/mtd-unaligned-read-fix new file mode 100644 index 0000000000..f4f468ce85 --- /dev/null +++ b/packages/linux/nslu2-kernel/2.6.15/mtd-unaligned-read-fix @@ -0,0 +1,40 @@ +diff -u linux-2.6-working/drivers/mtd/maps/ixp4xx.c linux-2.6-working/drivers/mtd/maps/ixp4xx.c +--- linux-2.6.15/drivers/mtd/maps/ixp4xx.c 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.15/drivers/mtd/maps/ixp4xx.c 1970-01-01 00:00:00.000000000 +0000 +@@ -53,19 +53,28 @@ + static void ixp4xx_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) + { +- int i; + u8 *dest = (u8 *) to; + void __iomem *src = map->virt + from; +- u16 data; + +- for (i = 0; i < (len / 2); i++) { +- data = le16_to_cpu(readw(src + 2*i)); +- dest[i * 2] = BYTE0(data); +- dest[i * 2 + 1] = BYTE1(data); ++ if (len <= 0) ++ return; ++ ++ if (from & 1) { ++ *dest++ = BYTE1(le16_to_cpu(readw(src))); ++ src++; ++ --len; ++ } ++ ++ while (len >= 2) { ++ u16 data = le16_to_cpu(readw(src)); ++ *dest++ = BYTE0(data); ++ *dest++ = BYTE1(data); ++ src += 2; ++ len -= 2; + } + +- if (len & 1) +- dest[len - 1] = BYTE0(le16_to_cpu(readw(src + 2*i))); ++ if (len > 0) ++ *dest++ = BYTE0(le16_to_cpu(readw(src))); + } + + /* diff --git a/packages/linux/nslu2-kernel_2.6.14-mm1.bb b/packages/linux/nslu2-kernel_2.6.14-mm1.bb index 39951939d2..ded1e5930d 100644 --- a/packages/linux/nslu2-kernel_2.6.14-mm1.bb +++ b/packages/linux/nslu2-kernel_2.6.14-mm1.bb @@ -8,7 +8,7 @@ PR_CONFIG = "0" # Increment the number below (i.e. the digits after PR) when # making changes within this file or for changes to the patches # applied to the kernel. -PR = "r0.${PR_CONFIG}" +PR = "r1.${PR_CONFIG}" include nslu2-kernel.inc @@ -16,8 +16,6 @@ include nslu2-kernel.inc N2K_PATCHES = "\ file://00-memory-h-page-shift.patch;patch=1 \ file://90-ixp4xx-pci-le.patch;patch=1 \ - file://10-ixp4xx-copy-from.patch;patch=1 \ - file://10-ixp4xx-le.patch;patch=1 \ file://18-ixp4xx-io-h-addr.patch;patch=1 \ file://19-jffs2-force-be.patch;patch=1 \ file://20-timer.patch;patch=1 \ diff --git a/packages/linux/nslu2-kernel_2.6.14.1.bb b/packages/linux/nslu2-kernel_2.6.14.2.bb index 6287c596b0..6287c596b0 100644 --- a/packages/linux/nslu2-kernel_2.6.14.1.bb +++ b/packages/linux/nslu2-kernel_2.6.14.2.bb diff --git a/packages/linux/nslu2-kernel_2.6.15-rc1.bb b/packages/linux/nslu2-kernel_2.6.15-rc1.bb new file mode 100644 index 0000000000..783ca72e23 --- /dev/null +++ b/packages/linux/nslu2-kernel_2.6.15-rc1.bb @@ -0,0 +1,37 @@ +# Kernel for NSLU2 +# +# Increment PR_CONFIG for changes to the nslu2-kernel specific +# defconfig (do *NOT* increment anything in here for changes +# to other kernel configs!) +PR_CONFIG = "0" +# +# Increment the number below (i.e. the digits after PR) when +# making changes within this file or for changes to the patches +# applied to the kernel. +PR = "r0.${PR_CONFIG}" + +include nslu2-kernel.inc + +# N2K_PATCHES - full list of patches to apply +N2K_PATCHES = "\ + file://00-memory-h-page-shift.patch;patch=1 \ + file://01-i2c-ixp4xx.patch;patch=1 \ + file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ + file://19-jffs2-force-be.patch;patch=1 \ + file://20-timer.patch;patch=1 \ + file://55-rtc-x1205.patch;patch=1 \ + file://60-nslu2-beeper.patch;patch=1 \ + file://60-nslu2-rtc.patch;patch=1 \ + file://75-nslu2-leds.patch;patch=1 \ + file://80-nslu2-io.patch;patch=1 \ + file://81-nslu2-class-device-create.patch;patch=1 \ + file://mtd-unaligned-read-fix;patch=1 \ + file://mtd-little-endian-support;patch=1 \ + file://anonymiser.patch;patch=1 \ +" + +# These options get added to the kernel command line, only put things +# specific to the bootstrap of *this* kernel in here - DISTRO specfic +# config must be in CMDLINE_ROOT (see the full definition of CMDLINE +# in nslu2-kernel.inc) +CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1" |