#include "mts_io.h"

#define OMAP_GPIO(BANK, GPIO) ((BANK*32)+GPIO)
/*
 * Within a struct gpio_pin, there is only one
 * occurrence of each pin, so there is only one
 * pin label set for each gpio pin.
 */
static struct gpio_pin gpio_pins_mtcdt3[] = {
	{
		.name = "RADIO_RESET",
		.pin = {
			.gpio = OMAP_GPIO(5,9), /* 5_9 */
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "radio-reset",
		},
	},
#if 0
  /* This goes through the PMIC for now */
	{
		.name = "RADIO_POWER",
		.pin = {
			.gpio = 0, 
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "radio-power",
		},
	},
#endif
	{
		.name = "DEVICE_RESET",
		.pin = {
			.gpio = OMAP_GPIO(1,29),
			.flags = GPIOF_IN,
			.label = "reset",
		},
		.active_low = 1,
	},
	{
		.name = "WIFI_BT_INT",
		.pin = {
			.gpio = OMAP_GPIO(4,12), /* 4_12 */
			.flags = GPIOF_IN,
			.label = "wifi-bt-int",
		},
		.capability = CAPA_BLUETOOTH,
	},
	{
		.name = "WIFI_RESET",
		.pin = {
			.gpio = OMAP_GPIO(4,11), /* 4_11 */
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "wifi-reset",
		},
		.capability = CAPA_WIFI,
		.active_low = 1,
	},
	{
		.name = "BT_RESET",
		.pin = {
			.gpio = OMAP_GPIO(4,10), /* 4_10 */
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "bt-reset",
		},
		.capability = CAPA_BLUETOOTH,
		.active_low = 1,
	},
	{
		.name = "USBHUB_RESET",
		.pin = {
			.gpio = OMAP_GPIO(3, 15),
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "usbhub-reset",
		},
		.active_low = 1,
	},
	{
		.name = "ETH_RESET",
		.pin = {
				.gpio = OMAP_GPIO(4,7), /* 4_7 */ 
				.flags = GPIOF_OUT_INIT_HIGH,
				.label = "eth-reset",
		},
		.active_low = 1,
	},
	{
		.name = "GNSS_INT",
		.pin = {
			.gpio = OMAP_GPIO(5,11), /* 5_11 */
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "gnss-int",
		},
		.capability = CAPA_GPS,
	},
	{
		.name = "GNSS_RESET",
		.pin = {
			.gpio = OMAP_GPIO(5,10), /* 5_10 */
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "gnss-reset",
		},
		.capability = CAPA_GPS,
		.active_low = 1,
	},
#if 0
    /* Link status comes directly from the MTQ out to the baseboard */
	{
		.name = "LS_LED", 
		.pin = {
			.gpio = 0,
			.flags = GPIOF_IN,
			.label = "led-ls",
		},
		.active_low = 1,
	},
#endif
	{
		.name = "STATUS_LED",
		.pin = {
			.gpio = OMAP_GPIO(0, 20),
			.flags = GPIOF_OUT_INIT_LOW,
			.label = "led-status",
		},
	},
	{
		.name = "CD", 
		.pin = {
			.gpio = OMAP_GPIO(0, 21),
			.flags = GPIOF_OUT_INIT_HIGH,
			.label = "led-cd",
		},
	},
	{
		.name = "LED1", 
		.pin = {
			.gpio = OMAP_GPIO(4, 26),
			.flags = GPIOF_OUT_INIT_LOW,
			.label = "led-sig1",
		},
	},
	{
		.name = "LED2", 
		.pin = {
			.gpio = OMAP_GPIO(4, 27),
			.flags = GPIOF_OUT_INIT_LOW,
			.label = "led-sig2",
		},
	},
	{
		.name = "LED3", 
		.pin = {
			.gpio = OMAP_GPIO(4, 28),
			.flags = GPIOF_OUT_INIT_LOW,
			.label = "led-sig3",
		},
	},
	{ },
};

static DEVICE_ATTR_MTS(dev_attr_wifi_reset_mtcdt3, "wifi-reset",
	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
static DEVICE_ATTR_MTS(dev_attr_bt_reset_mtcdt3, "bt-reset",
	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
static DEVICE_ATTR_RO_MTS(dev_attr_wifi_bt_int_mtcdt3, "wifi-bt-int",
	mts_attr_show_gpio_pin);
static DEVICE_ATTR_MTS(dev_attr_gnss_reset_mtcdt3, "gnss-reset",
	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
static DEVICE_ATTR_MTS(dev_attr_usbhub_reset_mtcdt3, "usbhub-reset",
	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
static DEVICE_ATTR_MTS(dev_attr_eth_reset_mtcdt3, "eth-reset",
	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
static DEVICE_ATTR_MTS(dev_attr_gnss_int_mtcdt3, "gnss-int",
	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
static DEVICE_ATTR_MTS(dev_attr_lora_reset_mtcdt3, "reset",
		mts_attr_show_lora_gpio_pin, mts_attr_store_lora_gpio_pin);
static DEVICE_ATTR_RO_MTS(dev_attr_lora_cdone_mtcdt3, "cdone",
		mts_attr_show_lora_gpio_pin);
static DEVICE_ATTR_MTS(dev_attr_lora_creset_mtcdt3, "creset",
		mts_attr_show_lora_gpio_pin, mts_attr_store_lora_gpio_pin);
static DEVICE_ATTR_RO_MTS(dev_attr_lora_eui_mtcdt3, "eui",
		mts_attr_show_lora_product_info);
static DEVICE_ATTR_RO_MTS(dev_attr_lora_product_id_mtcdt3, "product-id",
		mts_attr_show_lora_product_info);
static DEVICE_ATTR_RO_MTS(dev_attr_lora_hw_version_mtcdt3, "hw-version",
		mts_attr_show_lora_product_info);

static struct attribute *mtcdt3_platform_attributes[] = {
	&dev_attr_vendor_id.attr,
	&dev_attr_product_id.attr,
	&dev_attr_device_id.attr,
	&dev_attr_uuid.attr,
	&dev_attr_hw_version.attr,
	&dev_attr_imei.attr,
	&dev_attr_eth_mac.attr,
	&dev_attr_has_radio.attr,
	&dev_attr_reset.attr,
	&dev_attr_reset_monitor.attr,
	&dev_attr_reset_monitor_intervals.attr,

	&dev_attr_led_status.attr,
	&dev_attr_led_cd_gpio.attr,
	&dev_attr_led_sig1_gpio.attr,
	&dev_attr_led_sig2_gpio.attr,
	&dev_attr_led_sig3_gpio.attr,

	&dev_attr_usbhub_reset.attr,
	&dev_attr_eth_reset.attr,
        
  // radio feature is last to be able to 
  // easily remove radio.
  // is_radio_power_attr_mtcdt() searches
  // for this for truncation.
    &dev_attr_radio_power.attr,  /* Must be first radio attribute */
	&dev_attr_radio_reset.attr,

	&dev_attr_radio_reset_backoffs.attr,
	&dev_attr_radio_reset_backoff_index.attr,
	&dev_attr_radio_reset_backoff_seconds.attr,
		
    &dev_attr_wifi_reset_mtcdt3.attr,
	&dev_attr_bt_reset_mtcdt3.attr,
	&dev_attr_wifi_bt_int_mtcdt3.attr,
		
    &dev_attr_gnss_reset_mtcdt3.attr,
	&dev_attr_gnss_int_mtcdt3.attr,

	NULL,
};

static struct attribute_group mtcdt3_platform_attribute_group = {
	.attrs = mtcdt3_platform_attributes
};

static int 
is_radio_power_attr_mtcdt3(struct attribute *attr)
{
    return (attr ==  &dev_attr_radio_power.attr);
}

static struct attribute *mtcdt3_lora_attributes[] = {
		&dev_attr_lora_eui_mtcdt3.attr,
		&dev_attr_lora_product_id_mtcdt3.attr,
		&dev_attr_lora_hw_version_mtcdt3.attr,
		&dev_attr_lora_reset_mtcdt3.attr,
		&dev_attr_lora_cdone_mtcdt3.attr,
		&dev_attr_lora_creset_mtcdt3.attr,
		NULL,
};

static struct attribute_group mtcdt3_lora_attribute_group = {
	.attrs = mtcdt3_lora_attributes
};