From 1d2d4cb343e6d8b290e801a7dc776f9fb0aa8999 Mon Sep 17 00:00:00 2001 From: John Klug Date: Fri, 3 Sep 2021 04:59:39 -0500 Subject: radio reset monitor feature and MTRV1-0.4 hardware --- AUTHORS | 2 +- INSTALL | 370 --------------------------------------- configure.ac | 2 +- io-module/Makefile | 2 +- io-module/adc.c | 1 - io-module/machine/mtcap.c | 2 +- io-module/machine/mtcap3.c | 19 +- io-module/machine/mths.c | 2 +- io-module/machine/mtr.c | 369 +++++++++++++++++++++++++++++++++++++- io-module/mts-io.c | 72 +++++--- io-module/mts_io_module.h | 4 +- io-module/radio_udev_discovery.c | 308 ++++++++++++++++++++++++++++++++ io-module/radio_udev_discovery.h | 24 +++ test/resettest.sh | 46 +++++ 14 files changed, 800 insertions(+), 423 deletions(-) delete mode 100644 INSTALL create mode 100644 io-module/radio_udev_discovery.c create mode 100644 io-module/radio_udev_discovery.h create mode 100755 test/resettest.sh diff --git a/AUTHORS b/AUTHORS index c654a0d..89f02fb 100644 --- a/AUTHORS +++ b/AUTHORS @@ -1 +1 @@ -James Maki +Multi-Tech diff --git a/INSTALL b/INSTALL deleted file mode 100644 index 007e939..0000000 --- a/INSTALL +++ /dev/null @@ -1,370 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, -Inc. - - Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. This file is offered as-is, -without warranty of any kind. - -Basic Installation -================== - - Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. Some packages provide this -`INSTALL' file but do not implement all of the features documented -below. The lack of an optional feature in a given package is not -necessarily a bug. More recommendations for GNU packages can be found -in *note Makefile Conventions: (standards)Makefile Conventions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - - The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package, generally using the just-built uninstalled binaries. - - 4. Type `make install' to install the programs and any data files and - documentation. When installing into a prefix owned by root, it is - recommended that the package be configured and built as a regular - user, and only the `make install' phase executed with root - privileges. - - 5. Optionally, type `make installcheck' to repeat any self-tests, but - this time using the binaries in their final installed location. - This target does not install anything. Running this target as a - regular user, particularly if the prior `make install' required - root privileges, verifies that the installation completed - correctly. - - 6. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 7. Often, you can also type `make uninstall' to remove the installed - files again. In practice, not all packages have tested that - uninstallation works correctly, even though it is required by the - GNU Coding Standards. - - 8. Some packages, particularly those that use Automake, provide `make - distcheck', which can by used by developers to test that all other - targets like `make install' and `make uninstall' work correctly. - This target is generally not run by end users. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. This -is known as a "VPATH" build. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - - On MacOS X 10.5 and later systems, you can create libraries and -executables that work on multiple system types--known as "fat" or -"universal" binaries--by specifying multiple `-arch' options to the -compiler but only a single `-arch' option to the preprocessor. Like -this: - - ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CPP="gcc -E" CXXCPP="g++ -E" - - This is not guaranteed to produce working output in all cases, you -may have to build one architecture at a time and combine the results -using the `lipo' tool if you have problems. - -Installation Names -================== - - By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX', where PREFIX must be an -absolute file name. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. In general, the -default for these options is expressed in terms of `${prefix}', so that -specifying just `--prefix' will affect all of the other directory -specifications that were not explicitly provided. - - The most portable way to affect installation locations is to pass the -correct locations to `configure'; however, many packages provide one or -both of the following shortcuts of passing variable assignments to the -`make install' command line to change installation locations without -having to reconfigure or recompile. - - The first method involves providing an override variable for each -affected directory. For example, `make install -prefix=/alternate/directory' will choose an alternate location for all -directory configuration variables that were expressed in terms of -`${prefix}'. Any directories that were specified during `configure', -but not in terms of `${prefix}', must each be overridden at install -time for the entire installation to be relocated. The approach of -makefile variable overrides for each directory variable is required by -the GNU Coding Standards, and ideally causes no recompilation. -However, some platforms have known limitations with the semantics of -shared libraries that end up requiring recompilation when using this -method, particularly noticeable in packages that use GNU Libtool. - - The second method involves providing the `DESTDIR' variable. For -example, `make install DESTDIR=/alternate/directory' will prepend -`/alternate/directory' before all installation names. The approach of -`DESTDIR' overrides is not required by the GNU Coding Standards, and -does not work on platforms that have drive letters. On the other hand, -it does better at avoiding recompilation issues, and works well even -when some directory options were not specified in terms of `${prefix}' -at `configure' time. - -Optional Features -================= - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - - Some packages offer the ability to configure how verbose the -execution of `make' will be. For these packages, running `./configure ---enable-silent-rules' sets the default to minimal output, which can be -overridden with `make V=1'; while running `./configure ---disable-silent-rules' sets the default to verbose, which can be -overridden with `make V=0'. - -Particular systems -================== - - On HP-UX, the default C compiler is not ANSI C compatible. If GNU -CC is not installed, it is recommended to use the following options in -order to use an ANSI C compiler: - - ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" - -and if that doesn't work, install pre-built binaries of GCC for HP-UX. - - HP-UX `make' updates targets which have the same time stamps as -their prerequisites, which makes it generally unusable when shipped -generated files such as `configure' are involved. Use GNU `make' -instead. - - On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot -parse its `' header file. The option `-nodtk' can be used as -a workaround. If GNU CC is not installed, it is therefore recommended -to try - - ./configure CC="cc" - -and if that doesn't work, try - - ./configure CC="cc -nodtk" - - On Solaris, don't put `/usr/ucb' early in your `PATH'. This -directory contains several dysfunctional programs; working variants of -these programs are available in `/usr/bin'. So, if you need `/usr/ucb' -in your `PATH', put it _after_ `/usr/bin'. - - On Haiku, software installed for all users goes in `/boot/common', -not `/usr/local'. It is recommended to use the following options: - - ./configure --prefix=/boot/common - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS - KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf limitation. Until the limitation is lifted, you can use -this workaround: - - CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of all of the options to `configure', and exit. - -`--help=short' -`--help=recursive' - Print a summary of the options unique to this package's - `configure', and exit. The `short' variant lists options used - only in the top level, while the `recursive' variant lists options - also present in any nested packages. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--prefix=DIR' - Use DIR as the installation prefix. *note Installation Names:: - for more details, including other options available for fine-tuning - the installation locations. - -`--no-create' -`-n' - Run the configure checks, but stop before creating any output - files. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. diff --git a/configure.ac b/configure.ac index fc176d5..99f7a9a 100644 --- a/configure.ac +++ b/configure.ac @@ -1,4 +1,4 @@ -AC_INIT([mts-io], [4.6.0]) +AC_INIT([mts-io], [4.7.0]) AC_CONFIG_SRCDIR([util/mts_util_lora2_reset.c]) AM_INIT_AUTOMAKE AM_CONFIG_HEADER([config.h]) diff --git a/io-module/Makefile b/io-module/Makefile index 0c05414..e45e789 100644 --- a/io-module/Makefile +++ b/io-module/Makefile @@ -1,6 +1,6 @@ obj-m := mts_io.o -mts_io-objs := buttons.o mts-io.o mts_supercap.o +mts_io-objs := buttons.o mts-io.o mts_supercap.o radio_udev_discovery.o clean: rm -f *.ko *.o diff --git a/io-module/adc.c b/io-module/adc.c index 3d5f3d0..541dc95 100644 --- a/io-module/adc.c +++ b/io-module/adc.c @@ -118,7 +118,6 @@ static int mts_io_board_adc_probe(struct platform_device *pdev) static int mts_io_board_adc_remove(struct platform_device *pdev) { if (adc_clk) { - int ret; clk_disable_unprepare(adc_clk); } return 0; diff --git a/io-module/machine/mtcap.c b/io-module/machine/mtcap.c index 0d4af0f..e013f14 100644 --- a/io-module/machine/mtcap.c +++ b/io-module/machine/mtcap.c @@ -349,7 +349,7 @@ static int radio_reset_mtcap(int radio_model) if (!rst_pin || !onoff_pin) { return -ENODEV; } - + reset_radio_udev_discovery(); // // Unconditional shutdown // diff --git a/io-module/machine/mtcap3.c b/io-module/machine/mtcap3.c index 2304a28..8d2f3c4 100644 --- a/io-module/machine/mtcap3.c +++ b/io-module/machine/mtcap3.c @@ -373,7 +373,8 @@ static ssize_t mts_attr_store_radio_reset_mtcap3(struct device *dev, if (value != 0 && value != -1) { return -EINVAL; } - + + reset_radio_udev_discovery(); mutex_lock(&mts_io_mutex); radio_off_mtcap3(); @@ -453,6 +454,11 @@ static DEVICE_ATTR_MTS(dev_attr_led_lora_gpio_mtcap3, "led-lora", static DEVICE_ATTR_MTS(dev_attr_led_extra_gpio_mtcap3, "led-extra", mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); +// here to maintain compatiblility +static DEVICE_ATTR_MTS(dev_attr_radio_enable_mtcap3, "radio-enable", + mts_attr_show_radio_enable_mtcap3, mts_attr_store_radio_enable_mtcap3); + + static struct attribute *mtcap3_0_0_platform_attributes[] = { &dev_attr_vendor_id.attr, &dev_attr_product_id.attr, @@ -481,6 +487,8 @@ static struct attribute *mtcap3_0_0_platform_attributes[] = { &dev_attr_radio_reset_backoff_index.attr, &dev_attr_radio_reset_backoff_seconds.attr, + &dev_attr_radio_enable_mtcap3.attr, + NULL, }; @@ -529,12 +537,3 @@ static struct attribute *mtcap3_0_0_lora_attributes[] = { static struct attribute_group mtcap3_0_0_lora_attribute_group = { .attrs = mtcap3_0_0_lora_attributes }; - -// here to maintain compatiblility -static DEVICE_ATTR_MTS(dev_attr_radio_enable_mtcap3, "radio-enable", - mts_attr_show_radio_enable_mtcap3, mts_attr_store_radio_enable_mtcap3); - -static struct attribute *mtcap3_0_0_enable_radio_attribute[] = { - &dev_attr_radio_enable_mtcap3.attr, -}; - diff --git a/io-module/machine/mths.c b/io-module/machine/mths.c index 1922d88..b74e69f 100644 --- a/io-module/machine/mths.c +++ b/io-module/machine/mths.c @@ -658,7 +658,7 @@ static int radio_reset_mths(void) if (!rst_pin || !onoff_pin) { return -ENODEV; } - + reset_radio_udev_discovery(); // drive reset pin low for 500ms gpio_set_value(rst_pin->pin.gpio, 0); diff --git a/io-module/machine/mtr.c b/io-module/machine/mtr.c index 9f00be8..3838fd2 100644 --- a/io-module/machine/mtr.c +++ b/io-module/machine/mtr.c @@ -1460,6 +1460,270 @@ static struct gpio_pin gpio_pins_mtrv1_0_3[] = { { }, }; +static struct gpio_pin gpio_pins_mtrv1_0_4[] = { + { + .name = "ETH_RESET", + .pin = { + .gpio = AT91_PIN_PC6, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */ + .label = "eth-reset", + }, + .active_low = 0, + }, + { + .name = "DEVICE_RESET", + .pin = { + .gpio = AT91_PIN_PC4, + .flags = GPIOF_IN, + .label = "reset", + }, + .active_low = 1, + }, + { + .name = "LS_LED", + .pin = { + .gpio = AT91_PIN_PC4, +#if LED_LS_CONTROLLABLE + .flags = GPIOF_OUT_INIT_HIGH, +#else + .flags = GPIOF_IN, +#endif + .label = "led-ls", + }, + .active_low = 1, + }, + { + .name = "STATUS_LED", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led-status", + }, + .active_low = 1, + }, + { + .name = "LED3", + .pin = { + .gpio = AT91_PIN_PC15, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-wifi", + }, + .active_low = 1, + }, + { + .name = "LED3", + .pin = { + .gpio = AT91_PIN_PC15, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-b", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-cd", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-c", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig1", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-d", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig2", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-e", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig3", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-f", + }, + .active_low = 1, + }, + { // Moved in MTRV1-0.4 + .name = "RI_B", + .pin = { + .gpio = AT91_PIN_PC14, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "extserial-ri", + }, + .active_low = 1, + }, + { + .name = "DTR_B", + .pin = { + .gpio = AT91_PIN_PC26, + .flags = GPIOF_IN, + .label = "extserial-dtr", + }, + .active_low = 1, + }, + { + .name = "DSR_B", + .pin = { + .gpio = AT91_PIN_PC27, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "extserial-dsr", + }, + .active_low = 1, + }, + { + .name = "DCD_B", + .pin = { + .gpio = AT91_PIN_PC28, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "extserial-dcd", + }, + .active_low = 1, + }, + + // The difference between MTRv1_0_0 and MTRv1_0_1 starts here + { + .name = "WIFI_BT_ULPWKUP", + .pin = { + .gpio = AT91_PIN_PA0, + .flags = GPIOF_IN, + .label = "wifi-bt-ulpwkup", + } + }, + { + .name = "WIFI_BT_LPWKUP", + .pin = { + .gpio = AT91_PIN_PA6, + .flags = GPIOF_IN, + .label = "wifi-bt-lpwkup", + } + }, + { + .name = "WIFI_BT_INT", + .pin = { + .gpio = AT91_PIN_PB11, + .flags = GPIOF_IN, + .label = "wifi-bt-int", + } + }, + { + .name = "WIFI_BT_RESET", + .pin = { + .gpio = AT91_PIN_PD14, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "wifi-bt-reset", + } + }, + { + .name = "WIFI_BT_LPMODE", + .pin = { + .gpio = AT91_PIN_PD20, + .flags = GPIOF_IN, + .label = "wifi-bt-lpmode", + } + }, + { + .name = "GNSS_RESET", + .pin = { + .gpio = AT91_PIN_PD15, + .flags = GPIOF_OUT_INIT_LOW, + .label = "gnss-reset", + } + }, + { + .name = "SECURE_RESET", + .pin = { + .gpio = AT91_PIN_PD16, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "secure-reset", + } + }, + { + .name = "MTQ_RESET", + .pin = { + .gpio = AT91_PIN_PD17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "radio-reset", + } + }, + { + .name = "GNSS_INT", + .pin = { + .gpio = AT91_PIN_PD19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "gnss-int", + } + }, + // Difference with mtrv1_0_1 starts here + { + .name = "RADIO_WM_LK_M", // WM LINK Monitor for CAT M + .pin = { + .gpio = AT91_PIN_PA14, + .flags = GPIOF_IN, + .label = "radio-wm-lk-m", + } + }, + // RADIO_STATUS must be at the end, because it might be removed + // if we ever support a Telit module which has no radio status. + { + .name = "RADIO_STATUS", + .pin = { + .gpio = AT91_PIN_PA28, + .flags = GPIOF_IN, + .label = "radio-status", + } + }, + + { }, +}; + /* radio control (power/reset) for mtr */ static int radio_off_mtr(void) { @@ -1561,7 +1825,7 @@ static int radio_reset_mtr(void) if (!rst_pin || !onoff_pin) { return -ENODEV; } - + reset_radio_udev_discovery(); // drive reset pin low for 500ms gpio_set_value(rst_pin->pin.gpio, 0); @@ -1590,7 +1854,7 @@ static int radio_reset_mtr_mtq(void) if (!rst_pin) { return -ENODEV; } - + reset_radio_udev_discovery(); // drive reset pin low for 500ms gpio_set_value(rst_pin->pin.gpio, 0); @@ -1670,7 +1934,7 @@ static ssize_t mts_attr_store_radio_reset_mtr(struct device *dev, mutex_lock(&mts_io_mutex); - if (mts_hw_version == MTRV1_0_3) + if (mts_hw_version == MTRV1_0_3 || mts_hw_version == MTRV1_0_4) { err = radio_reset_mtr_mtq(); } @@ -1766,6 +2030,9 @@ static DEVICE_ATTR_MTS(dev_attr_usbhub_reset_mtr, "usbhub-reset", static DEVICE_ATTR_RO_MTS(dev_attr_gnss_int_mtr, "gnss-int", mts_attr_show_gpio_pin); +static DEVICE_ATTR_RO_MTS(dev_attr_radio_status_mtr, "radio-status", + mts_attr_show_gpio_pin); + static DEVICE_ATTR_RO_MTS(dev_attr_radio_wm_lk_m, "radio-wm-lk-m", mts_attr_show_gpio_pin); @@ -1816,6 +2083,9 @@ static struct attribute *mtr_platform_attributes[] = { &dev_attr_radio_reset_backoff_index.attr, &dev_attr_radio_reset_backoff_seconds.attr, + // UDEV notification of radio discovery + &dev_attr_radio_udev_discovery.attr, + &dev_attr_radio_reset_monitor.attr, NULL, }; @@ -1873,7 +2143,8 @@ static struct attribute *mtrv1_0_1_platform_attributes[] = { &dev_attr_led_d_gpio.attr, &dev_attr_led_e_gpio.attr, &dev_attr_led_f_gpio_mtr.attr, - + &dev_attr_radio_udev_discovery.attr, + &dev_attr_radio_reset_monitor.attr, NULL, }; @@ -1931,8 +2202,9 @@ static struct attribute *mtrv1_0_2_platform_attributes[] = { &dev_attr_led_e_gpio.attr, &dev_attr_led_f_gpio_mtr.attr, - &dev_attr_radio_wm_lk_m.attr, // CAT M feature - + &dev_attr_radio_wm_lk_m.attr, // CAT M feature + &dev_attr_radio_udev_discovery.attr, + &dev_attr_radio_reset_monitor.attr, NULL, }; @@ -1990,11 +2262,92 @@ static struct attribute *mtrv1_0_3_platform_attributes[] = { &dev_attr_led_e_gpio.attr, &dev_attr_led_f_gpio_mtr.attr, - &dev_attr_radio_wm_lk_m.attr, // CAT M feature? Is this still there on the MTQ with Quectel? - + &dev_attr_radio_wm_lk_m.attr, // CAT M feature? Is this still there on the MTQ with Quectel? + &dev_attr_radio_udev_discovery.attr, + &dev_attr_radio_reset_monitor.attr, NULL, }; static struct attribute_group mtrv1_0_3_platform_attribute_group = { .attrs = mtrv1_0_3_platform_attributes }; + +static struct attribute *mtrv1_0_4_platform_attributes[] = { + &dev_attr_vendor_id.attr, + &dev_attr_product_id.attr, + &dev_attr_device_id.attr, + &dev_attr_uuid.attr, + &dev_attr_hw_version.attr, + &dev_attr_imei.attr, + &dev_attr_eth_mac.attr, + &dev_attr_has_radio.attr, + &dev_attr_wifi_mac_mtr.attr, + &dev_attr_bluetooth_mac_mtr.attr, + + &dev_attr_reset.attr, + &dev_attr_reset_monitor.attr, + &dev_attr_reset_monitor_intervals.attr, + &dev_attr_radio_reset_mtr.attr, + + &dev_attr_radio_reset_backoffs.attr, + &dev_attr_radio_reset_backoff_index.attr, + &dev_attr_radio_reset_backoff_seconds.attr, + + &dev_attr_extserial_ri_gpio_mtr.attr, + &dev_attr_extserial_dtr_mtr.attr, + &dev_attr_extserial_dsr_gpio_mtr.attr, + &dev_attr_extserial_dcd_gpio_mtr.attr, + + &dev_attr_eth_reset_mtr.attr, + &dev_attr_wifi_bt_lpwkup_mtr.attr, + &dev_attr_wifi_bt_ulpwkup_mtr.attr, + &dev_attr_wifi_bt_reset_mtr.attr, + &dev_attr_wifi_bt_lpmode_mtr.attr, + &dev_attr_wifi_bt_int_mtr.attr, + &dev_attr_gnss_reset_mtr.attr, + &dev_attr_gnss_int_mtr.attr, + &dev_attr_radio_status_mtr.attr, + + &dev_attr_led_status.attr, + &dev_attr_led_cd_gpio.attr, + &dev_attr_led_sig1_gpio.attr, + &dev_attr_led_sig2_gpio.attr, + &dev_attr_led_sig3_gpio.attr, + &dev_attr_led_wifi_gpio_mtr.attr, + + &dev_attr_led_b_gpio.attr, + &dev_attr_led_c_gpio.attr, + &dev_attr_led_d_gpio.attr, + &dev_attr_led_e_gpio.attr, + &dev_attr_led_f_gpio_mtr.attr, + + &dev_attr_radio_wm_lk_m.attr, // CAT M feature? Is this still there on the MTQ with Quectel? + &dev_attr_radio_udev_discovery.attr, + &dev_attr_radio_reset_monitor.attr, + NULL, +}; + +static struct attribute_group mtrv1_0_4_platform_attribute_group = { + .attrs = mtrv1_0_4_platform_attributes +}; + +// L4G1 is active low, but other modules are active-high. +int +mtr_setup_radio_status(const char *product_id) +{ + struct gpio_pin *pin; + int l4g1; + + l4g1 = (strstr(product_id,"L4G1") != NULL); + if (l4g1) { + pin = gpio_pin_by_attr_name("radio-status"); + if (pin == NULL) { + printk(KERN_ERR "mts-io mtr_setup_radio_status() cannot find radio-status gpio"); + return -ENODEV; + } + pin->active_low = 1; + return 0; + } + return 0; +} + diff --git a/io-module/mts-io.c b/io-module/mts-io.c index e4290a6..ed0cb49 100644 --- a/io-module/mts-io.c +++ b/io-module/mts-io.c @@ -49,6 +49,7 @@ #include "mts_io.h" #include "buttons.h" #include "mts_supercap.h" +#include "radio_udev_discovery.h" #define PLATFORM_NAME "mts-io" @@ -257,6 +258,7 @@ static ssize_t mts_attr_store_radio_reset(struct device *dev, radio_reset_timer_is_start = 1; } + reset_radio_udev_discovery(); log_info("radio is reset\n"); pin = gpio_pin_by_attr_name("radio-reset"); @@ -509,6 +511,13 @@ static DEVICE_ATTR_MTS(dev_attr_radio_reset_backoff_index, "radio-reset-backoff- static DEVICE_ATTR_RO_MTS(dev_attr_radio_reset_backoff_seconds, "radio-reset-backoff-seconds", mts_attr_show_radio_reset_backoff_seconds); +static DEVICE_ATTR_MTS(dev_attr_radio_udev_discovery, "radio-udev-discovery", + mts_attr_show_radio_udev_discovery, mts_attr_store_radio_udev_discovery); + +static DEVICE_ATTR_MTS(dev_attr_radio_reset_monitor, "radio-reset-monitor", + mts_attr_show_radio_reset_monitor, mts_attr_store_radio_reset_monitor); + + /* shared gpio-based LEDs */ static DEVICE_ATTR_MTS(dev_attr_led_status, "led-status", mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); @@ -878,6 +887,13 @@ mts_id_eeprom_load(void) set_buttons(default_buttons); mts_hw_version = MTRV1_0_3; log_info("detected board %s", HW_VERSION_MTRV1_0_3); + } else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTRV1_0_4, strlen(HW_VERSION_MTRV1_0_4)) == 0) { + attr_group = &mtrv1_0_4_platform_attribute_group; + gpio_pins = gpio_pins_mtrv1_0_4; + set_buttons(default_buttons); + mts_hw_version = MTRV1_0_4; + mtr_setup_radio_status(id_eeprom.product_id); + log_info("detected board %s", HW_VERSION_MTRV1_0_4); } else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTHS_0_0, strlen(HW_VERSION_MTHS_0_0)) == 0) { attr_group = &mths_0_0_platform_attribute_group; gpio_pins = gpio_pins_mths_0_0; @@ -1307,41 +1323,41 @@ static int __init mts_io_init(void) static void __exit mts_io_exit(void) { - if (DEVICE_CAPA(id_eeprom.capa, CAPA_DOUT)) { - spi_unregister_driver(&mts_spi_dout_driver); - } - if (DEVICE_CAPA(id_eeprom.capa, CAPA_DIN)) { - spi_unregister_driver(&mts_spi_din_driver); - } - spi_unregister_driver(&mts_spi_board_temp_driver); + struct gpio_pin *pin; + if (DEVICE_CAPA(id_eeprom.capa, CAPA_DOUT)) { + spi_unregister_driver(&mts_spi_dout_driver); + } + if (DEVICE_CAPA(id_eeprom.capa, CAPA_DIN)) { + spi_unregister_driver(&mts_spi_din_driver); + } + spi_unregister_driver(&mts_spi_board_temp_driver); - struct gpio_pin *pin; - /* delete radio_reset_timer */ - del_timer(&radio_reset_timer); - /* delete radio_reset_available_timer */ - del_timer(&radio_reset_available_timer); + /* delete radio_reset_timer */ + del_timer(&radio_reset_timer); + /* delete radio_reset_available_timer */ + del_timer(&radio_reset_available_timer); - for (pin = gpio_pins; *pin->name; pin++) - if (pin->capability == 0 || DEVICE_CAPA(id_eeprom.capa,pin->capability)) - gpio_free(pin->pin.gpio); + for (pin = gpio_pins; *pin->name; pin++) + if (pin->capability == 0 || DEVICE_CAPA(id_eeprom.capa,pin->capability)) + gpio_free(pin->pin.gpio); - cleanup_buttons(); + cleanup_buttons(); - //cleanup supercap monitor worker if SUPERCAP CAPA is true - if(DEVICE_CAPA(id_eeprom.capa, CAPA_SUPERCAP)) { - cleanup_supercap_worker(); - } + //cleanup supercap monitor worker if SUPERCAP CAPA is true + if(DEVICE_CAPA(id_eeprom.capa, CAPA_SUPERCAP)) { + cleanup_supercap_worker(); + } - cleanup(); + cleanup(); - if (mts_leds) { - mts_leds_unregister(); - } + if (mts_leds) { + mts_leds_unregister(); + } - if (DEVICE_CAPA(id_eeprom.capa, CAPA_LORA) && attr_group_lora) { - mts_teardown_lora_port(); - } - log_info("exiting"); + if (DEVICE_CAPA(id_eeprom.capa, CAPA_LORA) && attr_group_lora) { + mts_teardown_lora_port(); + } + log_info("exiting"); } module_init(mts_io_init); diff --git a/io-module/mts_io_module.h b/io-module/mts_io_module.h index 5655f29..3219753 100644 --- a/io-module/mts_io_module.h +++ b/io-module/mts_io_module.h @@ -5,7 +5,7 @@ * MTAC cards. */ -#define DRIVER_VERSION "v4.6.0" +#define DRIVER_VERSION "v4.7.0" #define DRIVER_AUTHOR "Multitech Systems" #define DRIVER_DESC "MTS-IO Controller" #define DRIVER_NAME "mts-io" @@ -32,6 +32,7 @@ #define HW_VERSION_MTRV1_0_1 "MTRV1-0.1" #define HW_VERSION_MTRV1_0_2 "MTRV1-0.2" // Cat M #define HW_VERSION_MTRV1_0_3 "MTRV1-0.3" // MTR-MTQ +#define HW_VERSION_MTRV1_0_4 "MTRV1-0.4" // MTR No USB hub #define HW_VERSION_MTRE "MTRE-0.0" #define HW_VERSION_MTCDT_0_0 "MTCDT-0.0" // No GPS or WiFi Capability #define HW_VERSION_MTCDT_0_1 "MTCDT-0.1" // Conduit refresh with GPS and WiFi possible @@ -65,6 +66,7 @@ enum { MTRV1_0_1, MTRV1_0_2, MTRV1_0_3, + MTRV1_0_4, MTRE_0_0, MTCDT_0_0, MTCDT_0_1, diff --git a/io-module/radio_udev_discovery.c b/io-module/radio_udev_discovery.c new file mode 100644 index 0000000..eb6c1aa --- /dev/null +++ b/io-module/radio_udev_discovery.c @@ -0,0 +1,308 @@ +#include +#include +#include +#include "mts_io_module.h" +#include "radio_udev_discovery.h" + +/* + * radio-reset in the mts-io driver sets radio_udev_discovery to 0. + * Then it returns early if radio_udev_discovery is set to 1. The + * UDEV daemon is used to set radio_udev_discovery. Notifications + * are sent if radio_udev_discovery goes from 0 to 1. + */ + +int radio_udev_discovery = 1; + + +struct sig_pid_radio_reset_monitor_s { + pid_t pid; + int signal; + struct pid *vpid; +}; + +#define PID_MAX_COUNT 20 +static struct sig_pid_radio_reset_monitor_s sig_pid_radio_reset_monitor[PID_MAX_COUNT]; + + +/* Clear an entry in the table that no longer exists. + * unlocks the mts_io_lock, toggles the rcu_read_lock, + * then puts back the mts_io_lock. + */ +static int +verify_vpid(struct sig_pid_radio_reset_monitor_s *p) +{ + pid_t pid0 = p->pid; + struct pid *vpid1; + struct pid *vpid0 = p->vpid; + unsigned int vcount; + + // Check to see if vpid and pid still match + if (p->pid == 0) + return 0; + if (vpid0 == NULL) { + p->pid = 0; + return 0; + } + + mutex_unlock(&mts_io_mutex); + rcu_read_lock(); + vpid1 = find_vpid((pid_t)pid0); + if(vpid1 != NULL) + vcount = atomic_read(&vpid1->count); + else + vcount = 0; + rcu_read_unlock(); + mutex_lock(&mts_io_mutex); + if ((vpid1 != vpid0) || (vpid1 == NULL)) + p->pid = 0; + pr_debug("%s: verify_vpid: vpid0 0x%x vpid1 0x%x vcount %d for pid %d\n", + __FUNCTION__, + (unsigned int)vpid0, (unsigned int)vpid1, vcount, (int)pid0); + return p->pid; +} + +// Need to find existing entries and allow updates. Signal 0 removes a value. +ssize_t mts_attr_store_radio_reset_monitor(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + long pid0; + int sig; + int i; + int found; + struct pid *vpid1, *vpid0; + int retval; + + retval = sscanf(buf, "%ld %d", &pid0, &sig); + if (retval != 2) + return -EINVAL; + + if (pid0 < 0) + return -EINVAL; + + rcu_read_lock(); + vpid0 = find_vpid((pid_t)pid0); + rcu_read_unlock(); + pr_debug("%s: Try to store %ld %d 0x%x\n", + __FUNCTION__, + pid0,sig,(unsigned int)vpid0); + if (vpid0) { + /* Note that since we no longer hold the rcu lock, vpid + * could become invalid, unless it is ours. + */ + mutex_lock(&mts_io_mutex); + /* First see if we are already in the table -- search whole table */ + found = -1; + for (i=0; i < PID_MAX_COUNT; i++) { + if ((sig_pid_radio_reset_monitor[i].pid == (pid_t)pid0) && + (sig_pid_radio_reset_monitor[i].vpid == vpid0)) { + if (sig == 0) { + sig_pid_radio_reset_monitor[i].pid = 0; + sig_pid_radio_reset_monitor[i].vpid = NULL; + } else { + sig_pid_radio_reset_monitor[i].signal = sig; + mutex_unlock(&mts_io_mutex); + rcu_read_lock(); + vpid0 = find_vpid((pid_t)pid0); + rcu_read_unlock(); + pr_debug("%s: slot %d: pid %d, vpid 0x%x/vpid 0x%x\n", + __FUNCTION__, + i,pid0,vpid0,sig_pid_radio_reset_monitor[i].vpid); + mutex_lock(&mts_io_mutex); + if (vpid0 != sig_pid_radio_reset_monitor[i].vpid) { + sig_pid_radio_reset_monitor[i].pid = 0; /* Maybe exited? */ + sig_pid_radio_reset_monitor[i].vpid = NULL; + pr_debug("%s: mts-io: vpid mismatch pid %d, vpid 0x%x/0x%x, sig %d, cleared %d\n", + __FUNCTION__, + (int)sig_pid_radio_reset_monitor[i].pid, + (unsigned int)sig_pid_radio_reset_monitor[i].vpid,(unsigned int)vpid0, + (unsigned int)sig_pid_radio_reset_monitor[i].signal,i); + } else { + found = i; + pr_debug("%s: mts-io: found pid %d, vpid 0x%x, sig %d\n", + __FUNCTION__, + (int)sig_pid_radio_reset_monitor[i].pid, + (unsigned int)sig_pid_radio_reset_monitor[i].vpid, + (unsigned int)sig_pid_radio_reset_monitor[i].signal); + sig = 0; // Clear any more that we find. + } + + } + } // Location matches our pid + } // Loop through table + + pr_debug("%s: found=%d, sig=%d\n",__FUNCTION__,sig); + if (found > -1) { + mutex_unlock(&mts_io_mutex); + return count; + } + + if (sig == 0) { + // Nothing to clear out. + mutex_unlock(&mts_io_mutex); + return count; + } + + /* Need to find an unused slot and save our signal and PID. + * Still holding mutex_lock(&mts_io_mutex) + * Find first open slot + */ + found = -1; + for (i=0; i < PID_MAX_COUNT; i++) { + if (sig_pid_radio_reset_monitor[i].pid == 0) { + sig_pid_radio_reset_monitor[i].pid = (pid_t)pid0; + sig_pid_radio_reset_monitor[i].signal = sig; + sig_pid_radio_reset_monitor[i].vpid = vpid0; + pr_debug("%s: mts-io: open slot: pid %d, vpid 0x%x, sig %d, slot %d\n", + __FUNCTION__, + (int)pid0, + (unsigned int)vpid0, + (unsigned int)sig, i); + found = i; + break; + } else { + // See if this slot may be used. + pid_t pid1 = sig_pid_radio_reset_monitor[i].pid; + if (pid1 > 0) { + mutex_unlock(&mts_io_mutex); + rcu_read_lock(); + vpid1 = find_vpid((pid_t)pid1); + rcu_read_unlock(); + mutex_lock(&mts_io_mutex); + // See if pid and vpid still exists + if (!vpid1 || (vpid1 != sig_pid_radio_reset_monitor[i].vpid)) { + // Make sure no one else has claimed this slot + if (pid1 == sig_pid_radio_reset_monitor[i].pid) { + sig_pid_radio_reset_monitor[i].pid = 0; + sig_pid_radio_reset_monitor[i].vpid = NULL; + i--; // Should be able to use this slot. + continue; + } // Has not been re-claimed. + } // Slot has no user or exited user + } // Verify that slot in use is still in use + } // Found an empty slot + } // Loop through all the slots. + mutex_unlock(&mts_io_mutex); + } // pid is in pid table + return count; +} + +// Examples say buf is PAGE_SIZE long +ssize_t mts_attr_show_radio_reset_monitor(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int count; + int max = PAGE_SIZE; + int ret; + int i; + pid_t pid1; + + mutex_lock(&mts_io_mutex); + + count = 0; + for (i=0; i < PID_MAX_COUNT; i++) { + pid1 = verify_vpid(sig_pid_radio_reset_monitor + i); + if (pid1 == 0) { + sig_pid_radio_reset_monitor[i].pid = 0; + sig_pid_radio_reset_monitor[i].vpid = NULL; + continue; + } + pr_debug("%s: found a pid in slot %d\n",__FUNCTION__,i); + ret = snprintf(buf+count, max, "%lu %d\n", + (unsigned long)pid1, + sig_pid_radio_reset_monitor[i].signal); + if (ret > 0) { + max -= ret; + count += ret; + } + if (max == 0) + break; + if(ret == 0) + break; + } // Loop through all the slots until we are full. + + mutex_unlock(&mts_io_mutex); + + return count; +} + + +/* + * After a radio reset, prime the flag, so if it is set to one + * after this, then we wake the processes waiting on the flag. + * Caller holds the mts_io_mutex lock. + */ +void +reset_radio_udev_discovery(void) +{ + radio_udev_discovery = 0; +} + +int +udev_discovered_radio(void) +{ + return radio_udev_discovery; +} + +ssize_t mts_attr_show_radio_udev_discovery(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", radio_udev_discovery); +} + + +ssize_t mts_attr_store_radio_udev_discovery(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int value = -1; + pid_t pid1; + struct pid *vpid0, *vpid1; + int sig, i; + int retval; + + retval = sscanf(buf, "%i", &value); + if (retval != 1) + return -EINVAL; + + if (radio_udev_discovery == -1) { + // Not ready + return -EPROTO; + } + + // Only driver can set this to zero. + if (value == 0) + return -EINVAL; + + mutex_lock(&mts_io_mutex); + if((value == 1) && (radio_udev_discovery == 0)) { + radio_udev_discovery = 1; + pr_debug("%s: mts-io: UDEV discovered cellular modem after radio-reset so signal registered processes", + __FUNCTION__); + // kill all processes that are queued + for (i=0; i < PID_MAX_COUNT; i++) { + pid1 = verify_vpid(sig_pid_radio_reset_monitor + i); + if (pid1 == 0) continue; + sig = sig_pid_radio_reset_monitor[i].signal; + vpid0 = sig_pid_radio_reset_monitor[i].vpid; + mutex_unlock(&mts_io_mutex); + rcu_read_lock(); + vpid1 = find_vpid(pid1); + if (vpid1 == vpid0) { + printk(KERN_ALERT + "mts-io: %s: Sending signal %d to pid %d due to UDEV radio discovery\n", + __FUNCTION__, + sig,pid1); + kill_pid(vpid1,sig,1); + } // vpid is valid, same as registered + else { + printk(KERN_ALERT + "mts-io: %s: mismatched vpid %x/%x\n", __FUNCTION__, (unsigned int)vpid1, (unsigned int) vpid0); + } + + rcu_read_unlock(); + mutex_lock(&mts_io_mutex); + } // Find empty slot + } // udev wants us to wake everybody up after reset + mutex_unlock(&mts_io_mutex); + return count; +} diff --git a/io-module/radio_udev_discovery.h b/io-module/radio_udev_discovery.h new file mode 100644 index 0000000..d735dc1 --- /dev/null +++ b/io-module/radio_udev_discovery.h @@ -0,0 +1,24 @@ +#ifndef IO_MODULE_RADIO_UDEV_DISCOVERY_H_ +#define IO_MODULE_RADIO_UDEV_DISCOVERY_H_ + + +void reset_radio_udev_discovery(void); + +int udev_discovered_radio(void); + +ssize_t mts_attr_show_radio_udev_discovery(struct device *dev, + struct device_attribute *attr, + char *buf); + +ssize_t mts_attr_store_radio_udev_discovery(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count); + +ssize_t mts_attr_show_radio_reset_monitor(struct device *dev, + struct device_attribute *attr, char *buf); + +ssize_t mts_attr_store_radio_reset_monitor(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +#endif /* IO_MODULE_RADIO_UDEV_DISCOVERY_H_ */ + diff --git a/test/resettest.sh b/test/resettest.sh new file mode 100755 index 0000000..b0cb9e1 --- /dev/null +++ b/test/resettest.sh @@ -0,0 +1,46 @@ +#!/bin/bash +# Register for with radio-reset-monitor to +# get a signal when radio-reset occurs. +# Child process exists so the parent +# does not need to worry about resets +# starting before it can get through +# checks, and possibly sleeping forever. +# pgrep was needed to kill the sleep. +# wait is called to wait for the SIGUSR1 signal. +# The child never terminates. +# The hope is that the parent will fall into wait +# before the child registers for the radio-reset. +# checking for do_wait is risky if the kernel ever +# changes. The child will exit if the reset is not +# in process. +# + +USR1=10 +TERM=15 +function sleep_reset +{ + # Wait for parent to enter wait. + trap "kill $!;kill $BASHPID" $TERM + while [[ $(ps -h -o wchan -p $PPID) != do_wait ]] ; do usleep 100 ; done + echo Register parent for SIGUSR1 + echo "$$" "$USR1" >/sys/devices/platform/mts-io/radio-reset-monitor + discovered=$(cat /sys/devices/platform/mts-io/radio-udev-discovery) + if ((discovered == 1)) ; then + # reset is not in progress. + exit 0 + fi + sleep 4294967295 # Hopefully forever + exit 0 +} + +date +trap ":" $USR1 +in_reset=$(cat /sys/devices/platform/mts-io/radio-udev-discovery) +if ((in_reset == 0)) ; then + sleep_reset & + wait $! + # pgrep is needed to find the sleep process + pgrep -P $! | xargs kill +fi +echo Radio Reset is done. +date -- cgit v1.2.3