mts-io.git - mLinux I/O driver module

Age	Commit message (Collapse)	Author	Files
2012-05-07	en4: add reset, reset-monitor	Jesse Gilles	1

2012-05-07	add en4 support, reduce some duplication	Jesse Gilles	2

2012-01-05	add daughter card reset (ndc-reset)	Jesse Gilles	1

2011-10-03	add locking on adc read	Jesse Gilles	1

2011-09-30	read one adc at a time	Jesse Gilles	1

2011-09-30	Defined mts_product_id variable to store current product type on driver ↵	Thanh Tran	2
	init. All subsequence product type checkings are now done using this variable.
2011-09-30	1. Used strncmp() to compare only the product name portion of product_ID.	Thanh Tran	1
	2. GPOx logic levels were wrong, corrections were made to match the stand-alone CDP box. 3. Configured GPIO11 and GPIO12 to be open-drain. 4. Set driver version to v0.5.1
2011-09-27	rename MT100ECDP to MT100EOCG	Jesse Gilles	2

2011-09-14	Making IO signals logic the same as the stand-alone CDP box.	Thanh Tran	1

2011-09-01	Modified "Usage:" by determine which platform is currently running and ↵	Thanh Tran	1
	display "Usage:" accordingly.
2011-08-22	Added control of external DTR and external DCD signals for MT100ECDP.	Thanh Tran	1

2011-08-05	Added support for the embedded CDP module called (MT100ECDP).	Thanh Tran	2

2010-12-30	make TXD1 an input (fixes external serial RX data), bump version to v0.4.1	Jesse Gilles	1

2010-12-17	fix log typos	Jesse Gilles	1

2010-12-17	fix reading of dout pin state (invert to match output state)	Jesse Gilles	1

2010-12-17	invert dout state: 0 drives output to ground, 1 is open/floating	Jesse Gilles	1

2010-09-28	add usb host power switch debug gpios	James Maki	1

2010-09-17	make max_speed_hz configurable as module params for the spi devices.	James Maki	1

2010-09-16	the spi din should be SPI_CPOL	James Maki	1

2010-09-13	add dout, din, adc, led-dtr to help display	James Maki	1

2010-09-10	turn off DEBUG	James Maki	1

2010-09-10	clean up formatting	James Maki	1

2010-09-09	check the capabilities array instead of checking against the hw_version	James Maki	1

2010-09-09	copy the eeprom from the platform file instead of overwriting it.	James Maki	1

2010-09-09	cleanup eeprom related stuff.	James Maki	3
	- removed eeprom dir there is now a util mts-id-eeprom to create images. - added mac_addr and imei to the eeprom layout. If we decide not to use them I will remove it later.
2010-09-09	update for MTCDP-1.0	James Maki	2

2010-07-27	add extserial-dtr	Jesse Gilles	3
	* Add ability to read DTR pin on external serial port
2010-07-27	increase radio reset pulse to 250ms	Jesse Gilles	1
	* Fixes radio reset for G2,H4,EV2 modems
2010-05-17	add extserial-dsr to help	James Maki	1

2010-05-05	turn off DEBUG	James Maki	1

2010-05-04	fix an oops!	James Maki	1

2010-05-03	fix broken sysfs test	James Maki	1

2010-05-03	update comments and names	James Maki	1

2010-05-03	register devices with spi controller	James Maki	3

2010-04-29	Add GPLv2	James Maki	2

2010-04-27	rename platform to mtcdp	Jesse Gilles	2

2010-04-23	initial commit	James Maki	6