diff options
Diffstat (limited to 'io-module/mths.c')
| -rw-r--r-- | io-module/mths.c | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/io-module/mths.c b/io-module/mths.c index 739a9a0..a51380c 100644 --- a/io-module/mths.c +++ b/io-module/mths.c @@ -255,6 +255,237 @@ static struct gpio_pin gpio_pins_mths_0_0[] = { { }, }; +/* MTHS-0.1 has no WIFI LED */ +static struct gpio_pin gpio_pins_mths_0_1[] = { + { + .name = "RADIO_POWER_MONITOR", + .pin = { + .gpio = AT91_PIN_PA23, + .flags = GPIOF_IN, + .label = "radio-power-monitor", + }, + .active_low = 0, + }, + { + .name = "RADIO_RESET", + .pin = { + .gpio = AT91_PIN_PA22, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-reset", + }, + .active_low = 0, + }, + { + .name = "RADIO_POWER", + .pin = { + .gpio = AT91_PIN_PA21, + .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, + .label = "radio-power", + }, + .active_low = 0, + }, + { + .name = "DEVICE_RESET", + .pin = { + .gpio = AT91_PIN_PC4, + .flags = GPIOF_IN, + .label = "reset", + }, + .active_low = 1, + }, + { + .name = "WPS_BUTTON", + .pin = { + .gpio = AT91_PIN_PA13, + .flags = GPIOF_IN, + .label = "wps_button", + }, + .active_low = 1, + }, + { + .name = "BT_BUTTON", + .pin = { + //TODO return back .gpio = AT91_PIN_PC4, + .gpio = AT91_PIN_PA12, + .flags = GPIOF_IN, + .label = "bt_button", + }, + .active_low = 1, + }, + { + .name = "LS_LED", + .pin = { + .gpio = AT91_PIN_PC16, +#if LED_LS_CONTROLLABLE + .flags = GPIOF_OUT_INIT_HIGH, +#else + .flags = GPIOF_IN, +#endif + .label = "led-ls", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-bt", + }, + .active_low = 1, + }, + { + .name = "LED4", + .pin = { + .gpio = AT91_PIN_PC20, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-c", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-status", + }, + .active_low = 1, + }, + { + .name = "LED5", + .pin = { + .gpio = AT91_PIN_PC21, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-cd", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig3", + }, + .active_low = 1, + }, + { + .name = "LED6", + .pin = { + .gpio = AT91_PIN_PC19, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-d", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig2", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PC18, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-e", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig1", + }, + .active_low = 1, + }, + { + .name = "LED8", + .pin = { + .gpio = AT91_PIN_PC17, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-f", + }, + .active_low = 1, + }, + + // The difference between MTRv1_0_0 and MTRv1_0_1 starts here + { + .name = "WIFI_BT_ULPWKUP", + .pin = { + .gpio = AT91_PIN_PB9, + .flags = GPIOF_IN, + .label = "wifi-bt-ulpwkup", + } + }, + { + .name = "WIFI_BT_LPWKUP", + .pin = { + .gpio = AT91_PIN_PB11, + .flags = GPIOF_IN, + .label = "wifi-bt-lpwkup", + } + }, + { + .name = "WIFI_BT_INT", + .pin = { + .gpio = AT91_PIN_PB13, + .flags = GPIOF_IN, + .label = "wifi-bt-int", + } + }, + { + .name = "WIFI_BT_RESET", + .pin = { + .gpio = AT91_PIN_PB10, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "wifi-bt-reset", + } + }, + { + .name = "WIFI_BT_LPMODE", + .pin = { + .gpio = AT91_PIN_PB12, + .flags = GPIOF_IN, + .label = "wifi-bt-lpmode", + } + }, + { + .name = "GNSS_RESET", + .pin = { + .gpio = AT91_PIN_PC6, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "gnss-reset", + } + }, + { + .name = "USBHUB_RESET", + .pin = { + .gpio = AT91_PIN_PB6, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "usbhub-reset", + } + }, + { + .name = "GNSS_INT", + .pin = { + .gpio = AT91_PIN_PC7, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "gnss-int", + } + }, + + + { }, +}; + button_info_t mths_wps_button = { .name = "User Push Button WPS", .label_pin = "wps_button", @@ -287,6 +518,7 @@ button_info_t mths_bt_button = { .long_interval = BUTTON_LONG_HOLD_COUNT, }; +/* MTHS 0.0 and 0.1 have same buttons. */ static button_info_pt mths_buttons_0_0[] = { &reset_button, &mths_wps_button, |