diff options
Diffstat (limited to 'io-module/mt100eocg.c')
| -rw-r--r-- | io-module/mt100eocg.c | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/io-module/mt100eocg.c b/io-module/mt100eocg.c deleted file mode 100644 index 8d2338d..0000000 --- a/io-module/mt100eocg.c +++ /dev/null @@ -1,221 +0,0 @@ - -static struct gpio_pin gpio_pins_mt100eocg_0_0[] = { - { - .name = "ENIO", - .pin = AT91_PIN_PC15, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "ETH0_ENABLED", - .attr_name = "eth0-enabled", - .pin = AT91_PIN_PB31, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "RADIO_RESET", - .attr_name = "radio-reset", - .pin = AT91_PIN_PB30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "DEVICE_RESET", - .attr_name = "reset", - .pin = AT91_PIN_PA22, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "LED3", - .attr_name = "led3", - .pin = AT91_PIN_PC9, -#if LED_LS_CONTROLLABLE - .direction = GPIO_DIR_OUTPUT, -#else - .direction = GPIO_DIR_INPUT, -#endif - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "LED2", - .attr_name = "led2", - .pin = AT91_PIN_PA30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "RSERSRC", - .attr_name = "rsersrc", - .pin = AT91_PIN_PC7, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "TXD1", - .pin = AT91_PIN_PB17, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "DTR1", - .attr_name = "extserial-dtr", - .pin = AT91_PIN_PB18, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "DCD1", - .attr_name = "extserial-dcd", - .pin = AT91_PIN_PB3, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "GPIO11", - .attr_name = "gpio11", - .pin = AT91_PIN_PB19, - .direction = GPIO_DIR_OD, - .output_value = 1, - .use_pullup = 1, - }, - { - .name = "GPIO12", - .attr_name = "gpio12", - .pin = AT91_PIN_PB20, - .direction = GPIO_DIR_OD, - .output_value = 1, - .use_pullup = 1, - }, - { - .name = "ADC0", - .pin = AT91_PIN_PC0, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC1", - .pin = AT91_PIN_PC1, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC2", - .pin = AT91_PIN_PC2, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC3", - .pin = AT91_PIN_PC3, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { }, -}; - -/* mt100eocg specific attributes */ -static DEVICE_ATTR_MTS(dev_attr_gpo1, "gpo1", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_gpo2, "gpo2", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_gpo3, "gpo3", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_gpo4, "gpo4", - mts_attr_show_dout, mts_attr_store_dout); - - -static DEVICE_ATTR_MTS(dev_attr_led1, "led1", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_led2, "led2", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); - -#if LED_LS_CONTROLLABLE -static DEVICE_ATTR_MTS(dev_attr_led3, "led3", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); -#else -static DEVICE_ATTR_RO_MTS(dev_attr_led3, "led3", mts_attr_show_gpio_pin); -#endif - -static DEVICE_ATTR_MTS(dev_attr_led4, "led4", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_led5, "led5", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_led6, "led6", - mts_attr_show_dout, mts_attr_store_dout); - -static DEVICE_ATTR_MTS(dev_attr_gpio11, "gpio11", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); -static DEVICE_ATTR_MTS(dev_attr_gpio12, "gpio12", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); - -static DEVICE_ATTR_MTS(dev_attr_rsersrc, "rsersrc", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); - -static struct attribute *mt100eocg_platform_attributes[] = { - &dev_attr_vendor_id.attr, - &dev_attr_product_id.attr, - &dev_attr_device_id.attr, - &dev_attr_hw_version.attr, - &dev_attr_imei.attr, - &dev_attr_eth_mac.attr, - &dev_attr_extserial_dtr.attr, - &dev_attr_extserial_dcd_gpio.attr, - &dev_attr_rsersrc.attr, - &dev_attr_radio_reset.attr, - &dev_attr_eth0_enabled.attr, - &dev_attr_gpio11.attr, - &dev_attr_gpio12.attr, - - &dev_attr_gpo1.attr, - &dev_attr_gpo2.attr, - &dev_attr_gpo3.attr, - &dev_attr_gpo4.attr, - &dev_attr_led1.attr, - &dev_attr_led2.attr, - &dev_attr_led3.attr, - &dev_attr_led4.attr, - &dev_attr_led5.attr, - &dev_attr_led6.attr, - - &dev_attr_gpi5.attr, - &dev_attr_gpi6.attr, - &dev_attr_gpi7.attr, - &dev_attr_gpi8.attr, - &dev_attr_gpi9.attr, - &dev_attr_gpi10.attr, - - &dev_attr_board_temperature.attr, - - &dev_attr_adc0.attr, - &dev_attr_adc1.attr, - &dev_attr_adc2.attr, - &dev_attr_adc3.attr, - - NULL, -}; - -static struct attribute_group mt100eocg_platform_attribute_group = { - .attrs = mt100eocg_platform_attributes -}; |