diff options
Diffstat (limited to 'io-module/machine')
-rw-r--r-- | io-module/machine/mtcpm.c | 4 | ||||
-rw-r--r-- | io-module/machine/mtre.c | 282 |
2 files changed, 284 insertions, 2 deletions
diff --git a/io-module/machine/mtcpm.c b/io-module/machine/mtcpm.c index 481d649..8e1c3c2 100644 --- a/io-module/machine/mtcpm.c +++ b/io-module/machine/mtcpm.c @@ -65,7 +65,7 @@ static struct gpio_pin gpio_pins_mtcpm[] = { { .name = "USBHUB_RESET", .pin = { - .gpio = OMAP_GPIO(2, 3), + .gpio = OMAP_GPIO(3, 15), .flags = GPIOF_OUT_INIT_HIGH, .label = "usbhub-reset", }, @@ -83,7 +83,7 @@ static struct gpio_pin gpio_pins_mtcpm[] = { { .name = "GNSS_INT", .pin = { - .gpio = OMAP_GPIO(2, 16), + .gpio = OMAP_GPIO(5,12), /* 5_12 */ .flags = GPIOF_OUT_INIT_HIGH, .label = "gnss-int", }, diff --git a/io-module/machine/mtre.c b/io-module/machine/mtre.c new file mode 100644 index 0000000..e3df31c --- /dev/null +++ b/io-module/machine/mtre.c @@ -0,0 +1,282 @@ +static struct gpio_pin gpio_pins_mtre_0_0[] = { + { + .name = "ETH_RESET", + .pin = { + .gpio = AT91_PIN_PC6, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "eth-reset", + }, + .active_low = 0, + }, + { + .name = "RADIO_RESET", + .pin = { + .gpio = AT91_PIN_PC3, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "radio-reset", + }, + .active_low = 0, + }, + { + .name = "RADIO_POWER", + .pin = { + .gpio = AT91_PIN_PC3, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "radio-power", + }, + .active_low = 0, + }, + { + .name = "DEVICE_RESET", + .pin = { + .gpio = AT91_PIN_PC4, + .flags = GPIOF_IN, + .label = "reset", + }, + .active_low = 1, + }, + { + .name = "RI_B", + .pin = { + .gpio = AT91_PIN_PC25, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "extserial-ri", + }, + .active_low = 1, + }, + { + .name = "DTR_B", + .pin = { + .gpio = AT91_PIN_PC26, + .flags = GPIOF_IN, + .label = "extserial-dtr", + }, + .active_low = 1, + }, + { + .name = "DSR_B", + .pin = { + .gpio = AT91_PIN_PC27, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "extserial-dsr", + }, + .active_low = 1, + }, + { + .name = "DCD_B", + .pin = { + .gpio = AT91_PIN_PC28, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "extserial-dcd", + }, + .active_low = 1, + }, + { }, +}; + +static +struct mts_led mtre_0_0_leds[] = { + {.label = "led-cd",}, /* (cellular) Link Status */ + {.label = "led-sig1",}, /* (cellular) Link Quality */ + {.label = "led-sig2",}, /* (cellular) Link Quality */ + {.label = "led-sig3",}, /* (cellular) Link Quality */ + {.label = "led-sig4",}, /* (cellular) Link Quality */ + {.label = "led-alarm",}, /* Alarm */ + {.label = "led-no-alarm",}, /* Enabled (out-of-phase with Alarm) */ + {} +}; + +/* Initial state of ALARM is "no alarm" = 0, "major alarm" state is 1 */ +/* alarm_mtre value represents alarm state and controls both ALARM and NO-ALARM LEDs */ +static int alarm_mtre = 0; + +/* Initial state of DEVICE_READY is "not ready", "ready" state is 1 */ +/* If device_ready_mtre is 0 than NO-ALARM (marked ENABLED on the front panel) LED should be turned off */ +static int device_ready_mtre = 0; + +static unsigned long delay_on_alarm_mtre = 1000; +static unsigned long delay_off_alarm_mtre = 1; +static unsigned long delay_on_no_alarm_mtre = 1000; +static unsigned long delay_off_no_alarm_mtre = 1; + +static +void mts_update_alarm_mtre(int value) +{ + const struct mts_led *led_alarm = mts_led_by_label("led-alarm"); + const struct mts_led *led_no_alarm = mts_led_by_label("led-no-alarm"); + + if (!led_alarm || !led_no_alarm) { + return; + } + + if (value > 2) { + /* just update the LEDs with current state */ + value = alarm_mtre; + } + + if (value == 0) { + /* NO ALARM */ + alarm_mtre = 0; + mts_led_set(led_alarm, 1); /* turn ALARM LED off (note: inverted pin) */ + mts_led_set(led_no_alarm, device_ready_mtre); /* turn on NO-ALARM only if "device ready" */ + } + else if (value == 1) { + /* ALARM */ + alarm_mtre = 1; + mts_led_set(led_alarm, 0); /* turn ALARM LED on (note: inverted pin) */ + mts_led_set(led_no_alarm, 0); /* turn off NO-ALARM */ + } + else if (value == 2 && alarm_mtre != 1) { + /* Minor ALARM: blink for 1 second if there is no "major alarm" */ + delay_on_alarm_mtre = 1; + delay_off_alarm_mtre = 1000; + mts_led_blink(led_alarm, &delay_on_alarm_mtre, &delay_off_alarm_mtre, 1); /* blink ALARM LED (note: inverted) */ + + if (device_ready_mtre) { + /* blink NO-ALARM only if "device ready" */ + delay_on_no_alarm_mtre = 1; + delay_off_no_alarm_mtre = 1000; + mts_led_blink(led_no_alarm, &delay_on_no_alarm_mtre, &delay_off_no_alarm_mtre, 1); + } + } +} + +static +ssize_t mts_attr_store_alarm_mtre(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int value; + + if (sscanf(buf, "%i", &value) != 1) { + return -EINVAL; + } + + mts_update_alarm_mtre(value); + + return count; +} + +static +ssize_t mts_attr_show_alarm_mtre(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", alarm_mtre); +} + +static +ssize_t mts_attr_store_device_ready_mtre(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int value; + + if (sscanf(buf, "%i", &value) != 1) { + return -EINVAL; + } + + if (value == 0) { + device_ready_mtre = 0; + } + else if (value == 1) { + device_ready_mtre = 1; + } + else { + return -EINVAL; + } + + /* just update the LEDs with current state */ + mts_update_alarm_mtre(100); + + return count; +} + +static +ssize_t mts_attr_show_device_ready_mtre(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", device_ready_mtre); +} + +static DEVICE_ATTR_MTS(dev_attr_eth_reset_mtre, "eth-reset", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_extserial_ri_gpio_mtre, "extserial-ri", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_RO_MTS(dev_attr_extserial_dtr_gpio_mtre, "extserial-dtr", + mts_attr_show_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_extserial_dsr_gpio_mtre, "extserial-dsr", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_extserial_dcd_gpio_mtre, "extserial-dcd", + mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); + +static DEVICE_ATTR_MTS(dev_attr_alarm_mtre, "alarm", + mts_attr_show_alarm_mtre, mts_attr_store_alarm_mtre); + +static DEVICE_ATTR_MTS(dev_attr_device_ready_mtre, "device-ready", + mts_attr_show_device_ready_mtre, mts_attr_store_device_ready_mtre); + +static DEVICE_ATTR_MTS(dev_attr_led_cd_i2c_mtre, "led-cd", + mts_attr_show_led, mts_attr_store_led); + +static DEVICE_ATTR_MTS(dev_attr_led_sig1_i2c_mtre, "led-sig1", + mts_attr_show_led, mts_attr_store_led); + +static DEVICE_ATTR_MTS(dev_attr_led_sig2_i2c_mtre, "led-sig2", + mts_attr_show_led, mts_attr_store_led); + +static DEVICE_ATTR_MTS(dev_attr_led_sig3_i2c_mtre, "led-sig3", + mts_attr_show_led, mts_attr_store_led); + +static DEVICE_ATTR_MTS(dev_attr_led_sig4_i2c_mtre, "led-sig4", + mts_attr_show_led, mts_attr_store_led); + +static struct attribute *mtre_0_0_platform_attributes[] = { + /* Common entries */ + &dev_attr_vendor_id.attr, + &dev_attr_product_id.attr, + &dev_attr_device_id.attr, + &dev_attr_uuid.attr, + &dev_attr_hw_version.attr, + &dev_attr_imei.attr, + &dev_attr_eth_mac.attr, + &dev_attr_has_radio.attr, + + &dev_attr_reset.attr, + &dev_attr_reset_monitor.attr, + &dev_attr_reset_monitor_intervals.attr, + &dev_attr_radio_power.attr, + &dev_attr_radio_reset.attr, + + &dev_attr_radio_reset_backoffs.attr, + &dev_attr_radio_reset_backoff_index.attr, + &dev_attr_radio_reset_backoff_seconds.attr, + + &dev_attr_extserial_ri_gpio_mtre.attr, + &dev_attr_extserial_dtr_gpio_mtre.attr, + &dev_attr_extserial_dsr_gpio_mtre.attr, + &dev_attr_extserial_dcd_gpio_mtre.attr, + + &dev_attr_eth_reset_mtre.attr, + + &dev_attr_alarm_mtre.attr, /* Alarm attribute (driver for ENABLED/ALARM LEDs) */ + &dev_attr_device_ready_mtre.attr, /* Set device readyness attribute (affects ENABLED/ALARM LEDs) */ + + &dev_attr_led_cd_i2c_mtre.attr, /* (cellular) Link Status */ + &dev_attr_led_sig1_i2c_mtre.attr, /* (cellular) Link Quality */ + &dev_attr_led_sig2_i2c_mtre.attr, /* (cellular) Link Quality */ + &dev_attr_led_sig3_i2c_mtre.attr, /* (cellular) Link Quality */ + &dev_attr_led_sig4_i2c_mtre.attr, /* (cellular) Link Quality */ +#ifdef MTRE + &dev_attr_oem_string1.attr, + &dev_attr_oem_string2.attr, +#endif + + NULL, +}; + + +static struct attribute_group mtre_0_0_platform_attribute_group = { + .attrs = mtre_0_0_platform_attributes +}; |