diff options
| -rw-r--r-- | io-module/mt100eocg.c | 221 | ||||
| -rw-r--r-- | io-module/mtcdp.c | 310 | ||||
| -rw-r--r-- | io-module/mtr.c | 468 |
3 files changed, 0 insertions, 999 deletions
diff --git a/io-module/mt100eocg.c b/io-module/mt100eocg.c deleted file mode 100644 index 8d2338d..0000000 --- a/io-module/mt100eocg.c +++ /dev/null @@ -1,221 +0,0 @@ - -static struct gpio_pin gpio_pins_mt100eocg_0_0[] = { - { - .name = "ENIO", - .pin = AT91_PIN_PC15, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "ETH0_ENABLED", - .attr_name = "eth0-enabled", - .pin = AT91_PIN_PB31, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "RADIO_RESET", - .attr_name = "radio-reset", - .pin = AT91_PIN_PB30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "DEVICE_RESET", - .attr_name = "reset", - .pin = AT91_PIN_PA22, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "LED3", - .attr_name = "led3", - .pin = AT91_PIN_PC9, -#if LED_LS_CONTROLLABLE - .direction = GPIO_DIR_OUTPUT, -#else - .direction = GPIO_DIR_INPUT, -#endif - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "LED2", - .attr_name = "led2", - .pin = AT91_PIN_PA30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "RSERSRC", - .attr_name = "rsersrc", - .pin = AT91_PIN_PC7, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "TXD1", - .pin = AT91_PIN_PB17, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "DTR1", - .attr_name = "extserial-dtr", - .pin = AT91_PIN_PB18, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "DCD1", - .attr_name = "extserial-dcd", - .pin = AT91_PIN_PB3, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "GPIO11", - .attr_name = "gpio11", - .pin = AT91_PIN_PB19, - .direction = GPIO_DIR_OD, - .output_value = 1, - .use_pullup = 1, - }, - { - .name = "GPIO12", - .attr_name = "gpio12", - .pin = AT91_PIN_PB20, - .direction = GPIO_DIR_OD, - .output_value = 1, - .use_pullup = 1, - }, - { - .name = "ADC0", - .pin = AT91_PIN_PC0, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC1", - .pin = AT91_PIN_PC1, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC2", - .pin = AT91_PIN_PC2, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC3", - .pin = AT91_PIN_PC3, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { }, -}; - -/* mt100eocg specific attributes */ -static DEVICE_ATTR_MTS(dev_attr_gpo1, "gpo1", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_gpo2, "gpo2", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_gpo3, "gpo3", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_gpo4, "gpo4", - mts_attr_show_dout, mts_attr_store_dout); - - -static DEVICE_ATTR_MTS(dev_attr_led1, "led1", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_led2, "led2", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); - -#if LED_LS_CONTROLLABLE -static DEVICE_ATTR_MTS(dev_attr_led3, "led3", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); -#else -static DEVICE_ATTR_RO_MTS(dev_attr_led3, "led3", mts_attr_show_gpio_pin); -#endif - -static DEVICE_ATTR_MTS(dev_attr_led4, "led4", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_led5, "led5", - mts_attr_show_dout, mts_attr_store_dout); -static DEVICE_ATTR_MTS(dev_attr_led6, "led6", - mts_attr_show_dout, mts_attr_store_dout); - -static DEVICE_ATTR_MTS(dev_attr_gpio11, "gpio11", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); -static DEVICE_ATTR_MTS(dev_attr_gpio12, "gpio12", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); - -static DEVICE_ATTR_MTS(dev_attr_rsersrc, "rsersrc", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); - -static struct attribute *mt100eocg_platform_attributes[] = { - &dev_attr_vendor_id.attr, - &dev_attr_product_id.attr, - &dev_attr_device_id.attr, - &dev_attr_hw_version.attr, - &dev_attr_imei.attr, - &dev_attr_eth_mac.attr, - &dev_attr_extserial_dtr.attr, - &dev_attr_extserial_dcd_gpio.attr, - &dev_attr_rsersrc.attr, - &dev_attr_radio_reset.attr, - &dev_attr_eth0_enabled.attr, - &dev_attr_gpio11.attr, - &dev_attr_gpio12.attr, - - &dev_attr_gpo1.attr, - &dev_attr_gpo2.attr, - &dev_attr_gpo3.attr, - &dev_attr_gpo4.attr, - &dev_attr_led1.attr, - &dev_attr_led2.attr, - &dev_attr_led3.attr, - &dev_attr_led4.attr, - &dev_attr_led5.attr, - &dev_attr_led6.attr, - - &dev_attr_gpi5.attr, - &dev_attr_gpi6.attr, - &dev_attr_gpi7.attr, - &dev_attr_gpi8.attr, - &dev_attr_gpi9.attr, - &dev_attr_gpi10.attr, - - &dev_attr_board_temperature.attr, - - &dev_attr_adc0.attr, - &dev_attr_adc1.attr, - &dev_attr_adc2.attr, - &dev_attr_adc3.attr, - - NULL, -}; - -static struct attribute_group mt100eocg_platform_attribute_group = { - .attrs = mt100eocg_platform_attributes -}; diff --git a/io-module/mtcdp.c b/io-module/mtcdp.c deleted file mode 100644 index 31551b0..0000000 --- a/io-module/mtcdp.c +++ /dev/null @@ -1,310 +0,0 @@ - -#define USBH2_PS_CONTROLLABLE 0 - -static struct gpio_pin gpio_pins_mtcdp_0_0[] = { - { - .name = "ENIO", - .pin = AT91_PIN_PC15, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "ETH0_ENABLED", - .attr_name = "eth0-enabled", - .pin = AT91_PIN_PB31, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "RADIO_RESET", - .attr_name = "radio-reset", - .pin = AT91_PIN_PB30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "DEVICE_RESET", - .attr_name = "reset", - .pin = AT91_PIN_PA22, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "LS_LED", - .attr_name = "led-ls", - .pin = AT91_PIN_PC9, -#if LED_LS_CONTROLLABLE - .direction = GPIO_DIR_OUTPUT, -#else - .direction = GPIO_DIR_INPUT, -#endif - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "STATUS_LED", - .attr_name = "led-status", - .pin = AT91_PIN_PA30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "STATUS_LED", - .attr_name = "led-sdk-a", - .pin = AT91_PIN_PA30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, -#endif - { - .name = "RSERSRC", - .attr_name = "rsersrc", - .pin = AT91_PIN_PC7, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "DTR1", - .attr_name = "extserial-dtr", - .pin = AT91_PIN_PC10, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { }, -}; - -static struct gpio_pin gpio_pins_mtcdp_1_0[] = { - { - .name = "ENIO", - .pin = AT91_PIN_PC15, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "ETH0_ENABLED", - .attr_name = "eth0-enabled", - .pin = AT91_PIN_PB31, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "RADIO_RESET", - .attr_name = "radio-reset", - .pin = AT91_PIN_PB30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "DEVICE_RESET", - .attr_name = "reset", - .pin = AT91_PIN_PA22, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "LS_LED", - .attr_name = "led-ls", - .pin = AT91_PIN_PC9, -#if LED_LS_CONTROLLABLE - .direction = GPIO_DIR_OUTPUT, -#else - .direction = GPIO_DIR_INPUT, -#endif - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "STATUS_LED", - .attr_name = "led-status", - .pin = AT91_PIN_PA30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "STATUS_LED", - .attr_name = "led-sdk-a", - .pin = AT91_PIN_PA30, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "RSERSRC", - .attr_name = "rsersrc", - .pin = AT91_PIN_PC7, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "TXD1", - .pin = AT91_PIN_PB17, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "DTR1", - .attr_name = "extserial-dtr", - .pin = AT91_PIN_PB18, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, - { - .name = "USBH2_PS_OC", - .attr_name = "usbh2-ps-oc", - .pin = AT91_PIN_PB19, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, -#if USBH2_PS_CONTROLLABLE - { - .name = "USBH2_PS_ENABLED", - .attr_name = "usbh2-ps-enabled", - .pin = AT91_PIN_PB20, - .direction = GPIO_DIR_OUTPUT, - .output_value = 0, - .use_pullup = 0, - .active_low = 1, - }, -#endif - { - .name = "NDC_RESET", - .attr_name = "ndc-reset", - .pin = AT91_PIN_PB21, - .direction = GPIO_DIR_OUTPUT, - .output_value = 1, - .use_pullup = 0, - }, - { - .name = "ADC0", - .pin = AT91_PIN_PC0, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC1", - .pin = AT91_PIN_PC1, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC2", - .pin = AT91_PIN_PC2, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { - .name = "ADC3", - .pin = AT91_PIN_PC3, - .direction = GPIO_DIR_INPUT, - .output_value = 0, - .use_pullup = 0, - }, - { }, -}; - -/* mtcdp specific attributes */ -static DEVICE_ATTR_MTS(dev_attr_led_sdk_a, "led-sdk-a", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); -static DEVICE_ATTR_RO_MTS(dev_attr_usbh2_ps_oc, "usbh2-ps-oc", - mts_attr_show_gpio_pin); - -#if USBH2_PS_CONTROLLABLE -static DEVICE_ATTR_MTS(dev_attr_usbh2_ps_enabled, "usbh2-ps-enabled", - mts_attr_show_gpio_pin, mts_attr_store_gpio_pin); -#endif - -static struct attribute *mtcdp_platform_attributes[] = { - &dev_attr_vendor_id.attr, - &dev_attr_product_id.attr, - &dev_attr_device_id.attr, - &dev_attr_hw_version.attr, - &dev_attr_imei.attr, - &dev_attr_eth_mac.attr, - &dev_attr_reset.attr, - &dev_attr_reset_monitor.attr, - &dev_attr_radio_reset.attr, - &dev_attr_ndc_reset.attr, - &dev_attr_eth0_enabled.attr, - &dev_attr_extserial_dtr.attr, - &dev_attr_led_ls.attr, - &dev_attr_led_status.attr, - &dev_attr_led_sdk_a.attr, - &dev_attr_usbh2_ps_oc.attr, -#if USBH2_PS_CONTROLLABLE - &dev_attr_usbh2_ps_enabled.attr, -#endif - - &dev_attr_extserial_dcd.attr, - &dev_attr_extserial_ri.attr, - &dev_attr_extserial_dsr.attr, - &dev_attr_led_cd.attr, - &dev_attr_led_sdk_b.attr, - &dev_attr_led_sig1.attr, - &dev_attr_led_sdk_c.attr, - &dev_attr_led_sig2.attr, - &dev_attr_led_sdk_d.attr, - &dev_attr_led_sig3.attr, - &dev_attr_led_sdk_e.attr, - &dev_attr_led_dtr.attr, - &dev_attr_led_sdk_f.attr, - - &dev_attr_dout0.attr, - &dev_attr_dout1.attr, - &dev_attr_dout2.attr, - &dev_attr_dout3.attr, - &dev_attr_dout4.attr, - &dev_attr_dout5.attr, - &dev_attr_dout6.attr, - &dev_attr_dout7.attr, - - &dev_attr_din0.attr, - &dev_attr_din1.attr, - &dev_attr_din2.attr, - &dev_attr_din3.attr, - &dev_attr_din4.attr, - &dev_attr_din5.attr, - &dev_attr_din6.attr, - &dev_attr_din7.attr, - - &dev_attr_board_temperature.attr, - - &dev_attr_adc0.attr, - &dev_attr_adc1.attr, - &dev_attr_adc2.attr, - &dev_attr_adc3.attr, - - NULL, -}; - -static struct attribute_group mtcdp_platform_attribute_group = { - .attrs = mtcdp_platform_attributes -}; diff --git a/io-module/mtr.c b/io-module/mtr.c deleted file mode 100644 index cef1560..0000000 --- a/io-module/mtr.c +++ /dev/null @@ -1,468 +0,0 @@ - -static struct gpio_pin gpio_pins_mtr_0_0[] = { - { - .name = "NETH_RST", - .pin = { - .gpio = AT91_PIN_PC6, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "eth0-enabled", - }, - }, - { - .name = "PWRMON", - .pin = { - .gpio = AT91_PIN_PA23, - .flags = GPIOF_IN, - .label = "radio-power", - }, - }, - { - .name = "3G_RST", - .pin = { - .gpio = AT91_PIN_PA22, - .flags = GPIOF_OPEN_DRAIN | GPIOF_INIT_HIGH, - .label = "radio-reset", - }, - }, - { - .name = "3G_ONOFF", - .pin = { - .gpio = AT91_PIN_PA21, - .flags = GPIOF_OPEN_DRAIN | GPIOF_INIT_HIGH, - .label = "radio-enabled", - }, - }, - { - .name = "DEVICE_RESET", - .pin = { - .gpio = AT91_PIN_PC4, - .flags = GPIOF_IN, - .label = "reset", - }, - .active_low = 1, - }, - { - .name = "LS_LED", - .pin = { - .gpio = AT91_PIN_PC16, -#if LED_LS_CONTROLLABLE - .flags = GPIOF_OUT_INIT_HIGH, -#else - .flags = GPIOF_IN, -#endif - .label = "led-ls", - }, - .active_low = 1, - }, - { - .name = "STATUS_LED", - .pin = { - .gpio = AT91_PIN_PC21, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led-status", - }, - .active_low = 1, - }, - { - .name = "STATUS_LED", - .pin = { - .gpio = AT91_PIN_PC21, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led-a", - }, - .active_low = 1, - }, - { - .name = "LED3", - .pin = { - .gpio = AT91_PIN_PC15, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-wifi", - }, - .active_low = 1, - }, - { - .name = "LED3", - .pin = { - .gpio = AT91_PIN_PC15, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-b", - }, - .active_low = 1, - }, - { - .name = "LED4", - .pin = { - .gpio = AT91_PIN_PC20, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-cd", - }, - .active_low = 1, - }, - { - .name = "LED4", - .pin = { - .gpio = AT91_PIN_PC20, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-c", - }, - .active_low = 1, - }, - { - .name = "LED6", - .pin = { - .gpio = AT91_PIN_PC19, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-sig1", - }, - .active_low = 1, - }, - { - .name = "LED6", - .pin = { - .gpio = AT91_PIN_PC19, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-d", - }, - .active_low = 1, - }, - { - .name = "LED7", - .pin = { - .gpio = AT91_PIN_PC18, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-sig2", - }, - .active_low = 1, - }, - { - .name = "LED7", - .pin = { - .gpio = AT91_PIN_PC18, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-e", - }, - .active_low = 1, - }, - { - .name = "LED8", - .pin = { - .gpio = AT91_PIN_PC17, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-sig3", - }, - .active_low = 1, - }, - { - .name = "LED8", - .pin = { - .gpio = AT91_PIN_PC17, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-f", - }, - .active_low = 1, - }, - { - .name = "RI_B", - .pin = { - .gpio = AT91_PIN_PC25, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "extserial-ri", - }, - .active_low = 1, - }, - { - .name = "DTR_B", - .pin = { - .gpio = AT91_PIN_PC26, - .flags = GPIOF_IN, - .label = "extserial-dtr", - }, - .active_low = 1, - }, - { - .name = "DSR_B", - .pin = { - .gpio = AT91_PIN_PC27, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "extserial-dsr", - }, - .active_low = 1, - }, - { - .name = "DCD_B", - .pin = { - .gpio = AT91_PIN_PC28, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "extserial-dcd", - }, - .active_low = 1, - }, - { - .name = "BT_EN", - .pin = { - .gpio = AT91_PIN_PA28, - .flags = GPIOF_OUT_INIT_LOW, - .label = "bt-enabled", - }, - }, - { - .name = "WLAN_EN", - .pin = { - .gpio = AT91_PIN_PA27, - .flags = GPIOF_OUT_INIT_LOW, - .label = "wlan-enabled", - }, - }, - { }, -}; - -static struct gpio_pin gpio_pins_mtr_0_1[] = { - { - .name = "NETH_RST", - .pin = { - .gpio = AT91_PIN_PC6, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "eth0-enabled", - }, - }, - { - .name = "PWRMON", - .pin = { - .gpio = AT91_PIN_PA23, - .flags = GPIOF_IN, - .label = "radio-power", - }, - }, - { - .name = "3G_RST", - .pin = { - .gpio = AT91_PIN_PA22, - .flags = GPIOF_OUT_INIT_HIGH | GPIOF_PULLUP, - .label = "radio-reset", - }, - }, - { - .name = "3G_ONOFF", - .pin = { - .gpio = AT91_PIN_PA21, - .flags = GPIOF_OUT_INIT_HIGH | GPIOF_PULLUP, - .label = "radio-enabled", - }, - }, - { - .name = "DEVICE_RESET", - .pin = { - .gpio = AT91_PIN_PC4, - .flags = GPIOF_IN, - .label = "reset", - }, - .active_low = 1, - }, - { - .name = "LS_LED", - .pin = { - .gpio = AT91_PIN_PC16, -#if LED_LS_CONTROLLABLE - .flags = GPIOF_OUT_INIT_HIGH, -#else - .flags = GPIOF_IN, -#endif - .label = "led-ls", - }, - .active_low = 1, - }, - { - .name = "STATUS_LED", - .pin = { - .gpio = AT91_PIN_PC21, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led-status", - }, - .active_low = 1, - }, - { - .name = "LED3", - .pin = { - .gpio = AT91_PIN_PC15, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-wifi", - }, - .active_low = 1, - }, - { - .name = "LED3", - .pin = { - .gpio = AT91_PIN_PC15, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-b", - }, - .active_low = 1, - }, - { - .name = "LED4", - .pin = { - .gpio = AT91_PIN_PC20, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-cd", - }, - .active_low = 1, - }, - { - .name = "LED4", - .pin = { - .gpio = AT91_PIN_PC20, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-c", - }, - .active_low = 1, - }, - { - .name = "LED6", - .pin = { - .gpio = AT91_PIN_PC19, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-sig1", - }, - .active_low = 1, - }, - { - .name = "LED6", - .pin = { - .gpio = AT91_PIN_PC19, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-d", - }, - .active_low = 1, - }, - { - .name = "LED7", - .pin = { - .gpio = AT91_PIN_PC18, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-sig2", - }, - .active_low = 1, - }, - { - .name = "LED7", - .pin = { - .gpio = AT91_PIN_PC18, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-e", - }, - .active_low = 1, - }, - { - .name = "LED8", - .pin = { - .gpio = AT91_PIN_PC17, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-sig3", - }, - .active_low = 1, - }, - { - .name = "LED8", - .pin = { - .gpio = AT91_PIN_PC17, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "led-f", - }, - .active_low = 1, - }, - { - .name = "RI_B", - .pin = { - .gpio = AT91_PIN_PC25, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "extserial-ri", - }, - .active_low = 1, - }, - { - .name = "DTR_B", - .pin = { - .gpio = AT91_PIN_PC26, - .flags = GPIOF_IN, - .label = "extserial-dtr", - }, - .active_low = 1, - }, - { - .name = "DSR_B", - .pin = { - .gpio = AT91_PIN_PC27, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "extserial-dsr", - }, - .active_low = 1, - }, - { - .name = "DCD_B", - .pin = { - .gpio = AT91_PIN_PC28, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "extserial-dcd", - }, - .active_low = 1, - }, - { - .name = "BT_EN", - .pin = { - .gpio = AT91_PIN_PA28, - .flags = GPIOF_OUT_INIT_LOW, - .label = "bt-enabled", - }, - }, - { - .name = "WLAN_EN", - .pin = { - .gpio = AT91_PIN_PA27, - .flags = GPIOF_OUT_INIT_LOW, - .label = "wlan-enabled", - }, - }, - { }, -}; - -static struct attribute *mtr_platform_attributes[] = { - &dev_attr_vendor_id.attr, - &dev_attr_product_id.attr, - &dev_attr_device_id.attr, - &dev_attr_hw_version.attr, - &dev_attr_imei.attr, - &dev_attr_eth_mac.attr, - &dev_attr_wifi_mac.attr, - &dev_attr_reset.attr, - &dev_attr_reset_monitor.attr, - &dev_attr_radio_power_telit.attr, - &dev_attr_radio_reset_telit.attr, - &dev_attr_extserial_ri_gpio.attr, - &dev_attr_extserial_dtr.attr, - &dev_attr_extserial_dsr_gpio.attr, - &dev_attr_extserial_dcd_gpio.attr, - &dev_attr_eth0_enabled.attr, - &dev_attr_bt_enabled.attr, - &dev_attr_wlan_enabled.attr, - - &dev_attr_led_status.attr, - &dev_attr_led_sig1_gpio.attr, - &dev_attr_led_sig2_gpio.attr, - &dev_attr_led_sig3_gpio.attr, - &dev_attr_led_cd_gpio.attr, - &dev_attr_led_wifi_gpio.attr, - - &dev_attr_led_a_gpio.attr, - &dev_attr_led_b_gpio.attr, - &dev_attr_led_c_gpio.attr, - &dev_attr_led_d_gpio.attr, - &dev_attr_led_e_gpio.attr, - &dev_attr_led_f_gpio.attr, - - NULL, -}; - -static struct attribute_group mtr_platform_attribute_group = { - .attrs = mtr_platform_attributes -}; |