diff options
-rw-r--r-- | io-module/mtr2d2.c | 215 | ||||
-rw-r--r-- | io-module/mts_eeprom.h | 4 | ||||
-rw-r--r-- | io-module/mts_io.c | 86 | ||||
-rw-r--r-- | io-module/mts_io.h | 3 | ||||
-rw-r--r-- | io-module/spi.c | 12 |
5 files changed, 278 insertions, 42 deletions
diff --git a/io-module/mtr2d2.c b/io-module/mtr2d2.c new file mode 100644 index 0000000..58aeb03 --- /dev/null +++ b/io-module/mtr2d2.c @@ -0,0 +1,215 @@ + +static struct gpio_pin gpio_pins_mtr2d2_0_0[] = { + { + .name = "RADIO_RESET", + .pin = { + .gpio = AT91_PIN_PC5, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "radio-reset", + }, + }, + { + .name = "RADIO_RESET", + .pin = { + .gpio = AT91_PIN_PC5, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "radio-power", + }, + }, + { + .name = "DEVICE_RESET", + .pin = { + .gpio = AT91_PIN_PC4, + .flags = GPIOF_IN, + .label = "reset", + }, + .active_low = 1, + }, + { + .name = "LS_LED", + .pin = { + .gpio = AT91_PIN_PA14, +#if LED_LS_CONTROLLABLE + .flags = GPIOF_OUT_INIT_HIGH, +#else + .flags = GPIOF_IN, +#endif + .label = "led-ls", + }, + .active_low = 1, + }, + { + .name = "STATUS_LED", + .pin = { + .gpio = AT91_PIN_PA24, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led-status", + }, + .active_low = 1, + }, + { + .name = "STATUS_LED", + .pin = { + .gpio = AT91_PIN_PA24, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led-a", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PA25, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-cd", + }, + .active_low = 1, + }, + { + .name = "LED7", + .pin = { + .gpio = AT91_PIN_PA25, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-c", + }, + .active_low = 1, + }, + { + .name = "LED10", + .pin = { + .gpio = AT91_PIN_PA26, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig1", + }, + .active_low = 1, + }, + { + .name = "LED10", + .pin = { + .gpio = AT91_PIN_PA26, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-d", + }, + .active_low = 1, + }, + { + .name = "LED11", + .pin = { + .gpio = AT91_PIN_PA27, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig2", + }, + .active_low = 1, + }, + { + .name = "LED11", + .pin = { + .gpio = AT91_PIN_PA27, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-e", + }, + .active_low = 1, + }, + { + .name = "LED12", + .pin = { + .gpio = AT91_PIN_PA28, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-sig3", + }, + .active_low = 1, + }, + { + .name = "LED12", + .pin = { + .gpio = AT91_PIN_PA28, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-f", + }, + .active_low = 1, + }, + { + .name = "LED13", + .pin = { + .gpio = AT91_PIN_PA29, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-wifi", + }, + .active_low = 1, + }, + { + .name = "LED13", + .pin = { + .gpio = AT91_PIN_PA29, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "led-b", + }, + .active_low = 1, + }, + { }, +}; + +static struct attribute *mtr2d2_platform_attributes[] = { + &dev_attr_vendor_id.attr, + &dev_attr_product_id.attr, + &dev_attr_device_id.attr, + &dev_attr_hw_version.attr, + &dev_attr_imei.attr, + &dev_attr_eth_mac.attr, + &dev_attr_reset.attr, + &dev_attr_reset_monitor.attr, + &dev_attr_radio_power.attr, + &dev_attr_radio_reset.attr, + + &dev_attr_led_status.attr, + &dev_attr_led_wifi_gpio.attr, + &dev_attr_led_cd_gpio.attr, + &dev_attr_led_sig1_gpio.attr, + &dev_attr_led_sig2_gpio.attr, + &dev_attr_led_sig3_gpio.attr, + + &dev_attr_led_a_gpio.attr, + &dev_attr_led_b_gpio.attr, + &dev_attr_led_c_gpio.attr, + &dev_attr_led_d_gpio.attr, + &dev_attr_led_e_gpio.attr, + &dev_attr_led_f_gpio.attr, + + &dev_attr_board_temperature.attr, + + /* extra space for the accessory card attributes */ + NULL, // index 23 + NULL, // index 24 + NULL, // index 25 + NULL, // index 26 + NULL, // index 27 + NULL, // index 28 + NULL, // index 29 + NULL, // index 30 + NULL, // index 31 + NULL, // index 32 + NULL, // index 33 + NULL, // index 34 + NULL, // index 35 + NULL, // index 36 + NULL, // index 37 + NULL, // index 38 + NULL, // index 39 + NULL, // index 40 + NULL, // index 41 + NULL, // index 42 + NULL, // index 43 + NULL, // index 44 + NULL, // index 45 + NULL, // index 46 + NULL, // index 47 + NULL, // index 48 + NULL, // index 49 + NULL, // index 50 + NULL, // index 51 + NULL, +}; + +static struct attribute_group mtr2d2_platform_attribute_group = { + .attrs = mtr2d2_platform_attributes +}; diff --git a/io-module/mts_eeprom.h b/io-module/mts_eeprom.h index d6c3bd3..2e42008 100644 --- a/io-module/mts_eeprom.h +++ b/io-module/mts_eeprom.h @@ -23,8 +23,8 @@ struct mts_id_eeprom_layout { uint8_t reserved[302]; }; -/* daughter card EEPROM */ -struct mts_dc_eeprom_layout { +/* accessory card EEPROM */ +struct mts_ap_eeprom_layout { char vendor_id[32]; char product_id[32]; char device_id[32]; diff --git a/io-module/mts_io.c b/io-module/mts_io.c index e578941..bf0332a 100644 --- a/io-module/mts_io.c +++ b/io-module/mts_io.c @@ -59,19 +59,24 @@ extern uint8_t mts_id_eeprom[512]; static struct mts_id_eeprom_layout id_eeprom; -/* daughter card EEPROM */ +/* accessory card EEPROMs */ #ifdef MTOCGD2 -extern uint8_t mts_dc_eeprom[512]; +extern uint8_t mts_ap1_eeprom[512]; +extern uint8_t mts_ap2_eeprom[512]; #else -uint8_t mts_dc_eeprom[512] = {}; +uint8_t mts_ap1_eeprom[512] = {}; +uint8_t mts_ap2_eeprom[512] = {}; #endif -static struct mts_dc_eeprom_layout dc_eeprom; +static struct mts_ap_eeprom_layout ap1_eeprom; +static struct mts_ap_eeprom_layout ap2_eeprom; -bool daughter_card_capable = false; -bool has_daughter_card = false; +bool accessory_card_capable = false; +bool has_accessory_card_port_1 = false; +bool has_accessory_card_port_2 = false; static uint8_t mts_product_id; -static uint8_t mts_dc_product_id; +static uint8_t mts_ap1_product_id; +static uint8_t mts_ap2_product_id; static uint8_t has_spi_sout; static uint8_t has_spi_din; static uint8_t has_spi_dout; @@ -402,38 +407,42 @@ static DEVICE_ATTR_RO_MTS(dev_attr_eth_mac, "mac-eth", /* include per-device pins and attributes */ #include "mtr2.c" #include "mtr.c" +#include "mtr2d2.c" /* currently not supported #include "mtcdp.c" #include "mt100eocg.c" */ -static int mts_dc_eeprom_load(void) +/* reorg this function to load and log both accessory card EEPROMs + * should be able to handle either or both slots being empty + */ +static int mts_ap_eeprom_load(void) { - memcpy(&dc_eeprom, mts_dc_eeprom, sizeof(mts_dc_eeprom)); + memcpy(&ap1_eeprom, mts_ap1_eeprom, sizeof(mts_ap1_eeprom)); - if (mts_dc_eeprom[0] == 0xFF) { + if (mts_ap1_eeprom[0] == 0xFF) { log_error("uninitialized eeprom on daughter card"); return -EIO; - } else if (mts_dc_eeprom[0] == 0x00) { + } else if (mts_ap1_eeprom[0] == 0x00) { log_info("no daughter card inserted"); return 0; } - has_daughter_card = true; + has_accessory_card_port_1 = true; - log_info("daughter card vendor-id: %.32s", dc_eeprom.vendor_id); - log_info("daughter card product-id: %.32s", dc_eeprom.product_id); - log_info("daughter card device-id: %.32s", dc_eeprom.device_id); - log_info("daughter card hw-version: %.32s", dc_eeprom.hw_version); + log_info("daughter card vendor-id: %.32s", ap1_eeprom.vendor_id); + log_info("daughter card product-id: %.32s", ap1_eeprom.product_id); + log_info("daughter card device-id: %.32s", ap1_eeprom.device_id); + log_info("daughter card hw-version: %.32s", ap1_eeprom.hw_version); /* TODO: only show the mac address if this is the ethernet card */ log_info("daughter card mac-addr: %02X:%02X:%02X:%02X:%02X:%02X", - dc_eeprom.mac_addr[0], - dc_eeprom.mac_addr[1], - dc_eeprom.mac_addr[2], - dc_eeprom.mac_addr[3], - dc_eeprom.mac_addr[4], - dc_eeprom.mac_addr[5]); + ap1_eeprom.mac_addr[0], + ap1_eeprom.mac_addr[1], + ap1_eeprom.mac_addr[2], + ap1_eeprom.mac_addr[3], + ap1_eeprom.mac_addr[4], + ap1_eeprom.mac_addr[5]); return 0; } @@ -478,7 +487,7 @@ static int mts_id_eeprom_load(void) attr_group = &mtr2_platform_attribute_group; gpio_pins = gpio_pins_mtr2_0_0; mts_product_id = MTR2_0_0; - daughter_card_capable = true; + accessory_card_capable = true; has_spi_sout = 0; has_spi_din = 0; has_spi_dout = 0; @@ -506,7 +515,7 @@ static int mts_id_eeprom_load(void) attr_group = &mtr2_platform_attribute_group; gpio_pins = gpio_pins_mtr2_0_0; mts_product_id = MTOCGD2_0_0; - daughter_card_capable = true; + accessory_card_capable = true; has_spi_sout = 0; has_spi_din = 0; has_spi_dout = 0; @@ -530,6 +539,15 @@ static int mts_id_eeprom_load(void) has_spi_dout = 0; has_spi_temp = 0; log_info("detected board %s", HW_VERSION_MTOCGD_0_1); + } else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTR2D2_0_0, strlen(HW_VERSION_MTR2D2_0_0)) == 0) { + attr_group = &mtr2d2_platform_attribute_group; + gpio_pins = gpio_pins_mtr2d2_0_0; + mts_product_id = MTR2D2_0_0; + has_spi_sout = 0; + has_spi_din = 0; + has_spi_dout = 0; + has_spi_temp = 0; + log_info("detected board %s", HW_VERSION_MTR2D2_0_0); /* } else { attr_group = &mtcdp_platform_attribute_group; @@ -592,21 +610,21 @@ static int __init mts_io_init(void) goto error1; } - if (daughter_card_capable) { - mts_dc_product_id = MTDC_NONE; - ret = mts_dc_eeprom_load(); + if (accessory_card_capable) { + mts_ap1_product_id = MTDC_NONE; + ret = mts_ap_eeprom_load(); if (ret) { /* error reading the EEPROM from the daughter card */ log_error("error reading daughter card eeprom: %d", ret); log_error("unable to initialize daughter card"); goto error1; - } else if (has_daughter_card) { + } else if (has_accessory_card_port_1) { /* no error and we have a daughter card */ - if (strstr(dc_eeprom.product_id, PRODUCT_ID_MTDC_GPIOB)) { - mts_dc_product_id = MTDC_GPIOB_0_0; + if (strstr(ap1_eeprom.product_id, PRODUCT_ID_MTDC_GPIOB)) { + mts_ap1_product_id = MTDC_GPIOB_0_0; } - switch(mts_dc_product_id) { + switch(mts_ap1_product_id) { case MTDC_GPIOB_0_0: log_debug("adding GPIO daughter card attributes"); if (! mtr2_add_daughter_card_attributes()) { @@ -640,7 +658,7 @@ static int __init mts_io_init(void) break; default: - log_info("daughter card '%s' currently unsupported", dc_eeprom.product_id); + log_info("daughter card '%s' currently unsupported", ap1_eeprom.product_id); } } } @@ -795,8 +813,8 @@ static void __exit mts_io_exit(void) if (has_spi_sout) spi_unregister_driver(&mts_spi_sout_driver); - if (has_daughter_card) { - switch (mts_dc_product_id) { + if (has_accessory_card_port_1) { + switch (mts_ap1_product_id) { case MTDC_GPIOB_0_0: spi_unregister_driver(&mts_spi_dc_dout_driver); spi_unregister_driver(&mts_spi_dc_din_driver); diff --git a/io-module/mts_io.h b/io-module/mts_io.h index 0842f25..fc37ac5 100644 --- a/io-module/mts_io.h +++ b/io-module/mts_io.h @@ -46,6 +46,7 @@ struct device_attribute _dev_name = { \ #define PRODUCT_ID_MTR "MTR" #define PRODUCT_ID_MTOCGD2 "MTOCGD2" #define PRODUCT_ID_MTOCGD "MTOCGD" +#define PRODUCT_ID_MTR2D2 "MTR2D2" #define PRODUCT_ID_MTDC_GPIOB "MTDC-GPIOB" @@ -60,6 +61,7 @@ struct device_attribute _dev_name = { \ #define HW_VERSION_MTOCGD2_0_0 "MTOCGD2-0.0" #define HW_VERSION_MTOCGD_0_0 "MTOCGD-0.0" #define HW_VERSION_MTOCGD_0_1 "MTOCGD-0.1" +#define HW_VERSION_MTR2D2_0_0 "MTR2D2-0.0" enum { MTCDP_E1_DK_0_0, @@ -71,6 +73,7 @@ enum { MTOCGD2_0_0, MTOCGD_0_0, MTOCGD_0_1, + MTR2D2_0_0, }; enum { diff --git a/io-module/spi.c b/io-module/spi.c index 2da3f05..dfbdfe2 100644 --- a/io-module/spi.c +++ b/io-module/spi.c @@ -599,8 +599,8 @@ static int mts_spi_dc_dout_probe(struct spi_device *spi) { int tmp; - if (! has_daughter_card || mts_dc_product_id != MTDC_GPIOB_0_0) { - log_error("daughter card digital outputs not available"); + if (! has_accessory_card_port_1 || mts_ap1_product_id != MTDC_GPIOB_0_0) { + log_error("accessory card digital outputs not available"); return -ENODEV; } @@ -645,8 +645,8 @@ static int mts_spi_dc_din_probe(struct spi_device *spi) { int tmp; - if (! has_daughter_card || mts_dc_product_id != MTDC_GPIOB_0_0) { - log_error("daughter card digital inputs not available"); + if (! has_accessory_card_port_1 || mts_ap1_product_id != MTDC_GPIOB_0_0) { + log_error("accessory card digital inputs not available"); return -ENODEV; } @@ -688,8 +688,8 @@ static int mts_spi_dc_adc_probe(struct spi_device *spi) { int tmp; - if (! has_daughter_card || mts_dc_product_id != MTDC_GPIOB_0_0) { - log_error("daughter card analog to digital not available"); + if (! has_accessory_card_port_1 || mts_ap1_product_id != MTDC_GPIOB_0_0) { + log_error("accessory card analog to digital not available"); return -ENODEV; } |