New MTHS HW Version 0.14.1.3

3 files changed, 242 insertions, 2 deletions

diff --git a/io-module/mths.c b/io-module/mths.c
index 739a9a0..a51380c 100644
--- a/io-module/mths.c
+++ b/io-module/mths.c
@@ -255,6 +255,237 @@ static struct gpio_pin gpio_pins_mths_0_0[] = {
     { },
 };
 
+/* MTHS-0.1 has no WIFI LED */
+static struct gpio_pin gpio_pins_mths_0_1[] = {
+    {
+        .name = "RADIO_POWER_MONITOR",
+        .pin = {
+            .gpio = AT91_PIN_PA23,
+            .flags = GPIOF_IN,
+            .label = "radio-power-monitor",
+        },
+        .active_low = 0,
+    },
+    {
+        .name = "RADIO_RESET",
+        .pin = {
+            .gpio = AT91_PIN_PA22,
+            .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
+            .label = "radio-reset",
+        },
+        .active_low = 0,
+    },
+    {
+        .name = "RADIO_POWER",
+        .pin = {
+            .gpio = AT91_PIN_PA21,
+            .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
+            .label = "radio-power",
+        },
+        .active_low = 0,
+    },
+    {
+        .name = "DEVICE_RESET",
+        .pin = {
+            .gpio = AT91_PIN_PC4,
+            .flags = GPIOF_IN,
+            .label = "reset",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "WPS_BUTTON",
+        .pin = {
+            .gpio = AT91_PIN_PA13,
+            .flags = GPIOF_IN,
+            .label = "wps_button",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "BT_BUTTON",
+        .pin = {
+            //TODO return back .gpio = AT91_PIN_PC4,
+            .gpio = AT91_PIN_PA12,
+            .flags = GPIOF_IN,
+            .label = "bt_button",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LS_LED",
+        .pin = {
+            .gpio = AT91_PIN_PC16,
+#if LED_LS_CONTROLLABLE
+            .flags = GPIOF_OUT_INIT_HIGH,
+#else
+            .flags = GPIOF_IN,
+#endif
+            .label = "led-ls",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LED4",
+        .pin = {
+            .gpio = AT91_PIN_PC20,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-bt",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LED4",
+        .pin = {
+            .gpio = AT91_PIN_PC20,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-c",
+        },
+        .active_low = 1,
+    },
+    {
+	    .name = "LED5",
+	    .pin = {
+	       .gpio = AT91_PIN_PC21,
+	        .flags = GPIOF_OUT_INIT_HIGH,
+	        .label = "led-status",
+	    },
+	    .active_low = 1,
+    },
+    {
+	    .name = "LED5",
+	    .pin = {
+	        .gpio = AT91_PIN_PC21,
+	        .flags = GPIOF_OUT_INIT_HIGH,
+	        .label = "led-cd",
+	    },
+	    .active_low = 1,
+    },
+    {
+        .name = "LED6",
+        .pin = {
+            .gpio = AT91_PIN_PC19,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-sig3",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LED6",
+        .pin = {
+            .gpio = AT91_PIN_PC19,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-d",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LED7",
+        .pin = {
+            .gpio = AT91_PIN_PC18,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-sig2",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LED7",
+        .pin = {
+            .gpio = AT91_PIN_PC18,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-e",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LED8",
+        .pin = {
+            .gpio = AT91_PIN_PC17,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-sig1",
+        },
+        .active_low = 1,
+    },
+    {
+        .name = "LED8",
+        .pin = {
+            .gpio = AT91_PIN_PC17,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "led-f",
+        },
+        .active_low = 1,
+    },
+
+    // The difference between MTRv1_0_0 and MTRv1_0_1 starts here
+    {
+        .name = "WIFI_BT_ULPWKUP",
+        .pin = {
+            .gpio = AT91_PIN_PB9,
+            .flags = GPIOF_IN,
+            .label = "wifi-bt-ulpwkup",
+        }
+    },
+    {
+        .name = "WIFI_BT_LPWKUP",
+        .pin = {
+            .gpio = AT91_PIN_PB11,
+            .flags = GPIOF_IN,
+            .label = "wifi-bt-lpwkup",
+        }
+    },
+    {
+        .name = "WIFI_BT_INT",
+        .pin = {
+            .gpio = AT91_PIN_PB13,
+            .flags = GPIOF_IN,
+            .label = "wifi-bt-int",
+        }
+    },
+    {
+        .name = "WIFI_BT_RESET",
+        .pin = {
+            .gpio = AT91_PIN_PB10,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "wifi-bt-reset",
+        }
+    },
+    {
+        .name = "WIFI_BT_LPMODE",
+        .pin = {
+            .gpio = AT91_PIN_PB12,
+            .flags = GPIOF_IN,
+            .label = "wifi-bt-lpmode",
+        }
+    },
+    {
+        .name = "GNSS_RESET",
+        .pin = {
+            .gpio = AT91_PIN_PC6,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "gnss-reset",
+        }
+    },
+    {
+        .name = "USBHUB_RESET",
+        .pin = {
+            .gpio = AT91_PIN_PB6,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "usbhub-reset",
+        }
+    },
+    {
+        .name = "GNSS_INT",
+        .pin = {
+            .gpio = AT91_PIN_PC7,
+            .flags = GPIOF_OUT_INIT_HIGH,
+            .label = "gnss-int",
+        }
+    },
+
+
+    { },
+};
+
 button_info_t mths_wps_button = {
         .name = "User Push Button WPS",
         .label_pin = "wps_button",
@@ -287,6 +518,7 @@ button_info_t mths_bt_button = {
         .long_interval = BUTTON_LONG_HOLD_COUNT,
 };
 
+/* MTHS 0.0 and 0.1 have same buttons. */
 static button_info_pt mths_buttons_0_0[] = {
         &reset_button,
         &mths_wps_button,
diff --git a/io-module/mts-io.c b/io-module/mts-io.c
index 0ea7e45..5e557fd 100644
--- a/io-module/mts-io.c
+++ b/io-module/mts-io.c
@@ -715,6 +715,12 @@ mts_id_eeprom_load(void)
 		set_buttons(mths_buttons_0_0);
 		mts_hw_version = MTHS_0_0;
 		log_info("detected board %s", HW_VERSION_MTHS_0_0);
+	} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTHS_0_1, strlen(HW_VERSION_MTHS_0_1)) == 0) {
+		attr_group = &mths_0_0_platform_attribute_group;
+		gpio_pins = gpio_pins_mths_0_1;
+		set_buttons(mths_buttons_0_0); /* Only one button version */
+		mts_hw_version = MTHS_0_1;
+		log_info("detected board %s", HW_VERSION_MTHS_0_1);
 	} else if (((tmp=HW_VERSION_MTCDT_0_1),strncmp(id_eeprom.hw_version, tmp, strlen(tmp)) == 0) ||
             ((tmp=HW_VERSION_MTCDTIP_0_0),strncmp(id_eeprom.hw_version, tmp, strlen(tmp)) == 0)) {
 		current_blength = attr_blength = sizeof  mtcdt_0_1_platform_attributes;
diff --git a/io-module/mts_io_module.h b/io-module/mts_io_module.h
index 3d0240f..41a27e5 100644
--- a/io-module/mts_io_module.h
+++ b/io-module/mts_io_module.h
@@ -5,7 +5,7 @@
  * MTAC cards.
  */
 
-#define DRIVER_VERSION  "v4.1.2"
+#define DRIVER_VERSION  "v4.1.3"
 #define DRIVER_AUTHOR   "James Maki <jmaki@multitech.com>"
 #define DRIVER_DESC "MTS-IO Controller"
 #define DRIVER_NAME "mts-io"
@@ -38,6 +38,7 @@
 #define HW_VERSION_MTCAP_0_0			"MTCAP-0.0"
 #define HW_VERSION_MTCAP_0_1			"MTCAP-0.1"
 #define HW_VERSION_MTHS_0_0			"MTHS-0.0"
+#define HW_VERSION_MTHS_0_1			"MTHS-0.1"
 
 enum {
 	MTCDP_E1_DK_0_0,
@@ -54,7 +55,8 @@ enum {
 	MTCDTIPHP_0_0,
 	MTCAP_0_0,
 	MTCAP_0_1,
-    MTHS_0_0,
+	MTHS_0_0,
+	MTHS_0_1,
 };
 
 enum {