Remove duplicate pin definitions in mts-io.c3.0.2

1 files changed, 3 insertions, 484 deletions

diff --git a/io-module/mts-io.c b/io-module/mts-io.c
index da02ce8..7726b34 100644
--- a/io-module/mts-io.c
+++ b/io-module/mts-io.c
@@ -47,25 +47,17 @@
 
 #include "mts_io_module.h"
 #include "mts_io.h"
-/*
-#include "mtac.h"
-*/
 #include "buttons.h"
 
 #define PLATFORM_NAME	"mts-io"
 
 #define LED_LS_CONTROLLABLE		0
 
-int mtsio_reread_eeprom = 0;
-module_param(mtsio_reread_eeprom, int, S_IRUSR | S_IRGRP | S_IROTH);
-MODULE_PARM_DESC(mtsio_reread_eeprom, "Non-zero means re-read EEPROM");
-
 /* on-board EEPROM */
 extern uint8_t mts_id_eeprom[512];
 static struct mts_id_eeprom_layout id_eeprom;
 
-uint8_t mts_hw_version;
-
+static uint8_t mts_hw_version;
 struct platform_device *mts_io_platform_device;
 EXPORT_SYMBOL(mts_io_platform_device);
 
@@ -459,7 +451,6 @@ static DEVICE_ATTR_MTS(dev_attr_led_d_gpio, "led-d",
 static DEVICE_ATTR_MTS(dev_attr_led_e_gpio, "led-e",
 	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
 
-
 /* eeprom info */
 static ssize_t mts_attr_show_product_info(struct device *dev,
 			struct device_attribute *attr,
@@ -562,478 +553,8 @@ static int get_radio_model_from_product_id(void) {
 /* include on-board lora peripheral */
 #include "mts_lora.c"
 
-/* Start of mtcdt.c */
-/*
- * Within a struct gpio_pin, there is only one
- * occurance of each pin, so there is only one
- * pin label set for each gpio pin.
- */
-static struct gpio_pin gpio_pins_mtcdt_0_0[] = {
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC3,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-reset",
-		},
-	},
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC3,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-power",
-		},
-	},
-	{
-		.name = "DEVICE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC2,
-			.flags = GPIOF_IN,
-			.label = "reset",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "ETH_RESET",
-		.pin = {
-				.gpio = AT91_PIN_PC4,
-				.flags = GPIOF_OUT_INIT_HIGH,
-				.label = "eth-reset",
-		}
-	},
-	{
-		.name = "LS_LED", /* LED7 */
-		.pin = {
-			.gpio = AT91_PIN_PA14,
-#if LED_LS_CONTROLLABLE
-			.flags = GPIOF_OUT_INIT_HIGH,
-#else
-			.flags = GPIOF_IN,
-#endif
-			.label = "led-ls",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "STATUS_LED", /* LED2 */
-		.pin = {
-			.gpio = AT91_PIN_PA24,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "led-status",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED5",
-		.pin = {
-			.gpio = AT91_PIN_PA25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-cd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED5",
-		.pin = {
-			.gpio = AT91_PIN_PA25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-a",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED1",
-		.pin = {
-			.gpio = AT91_PIN_PA26,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig1",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED1",
-		.pin = {
-			.gpio = AT91_PIN_PA26,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-b",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PA27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig2",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PA27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-c",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PA28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig3",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PA28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-d",
-		},
-		.active_low = 1,
-	},
-};
-
-
-static struct gpio_pin gpio_pins_mtcdt_0_1[] = {
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC3,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-reset",
-		},
-	},
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC3,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-power",
-		},
-	},
-	{
-		.name = "DEVICE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC2,
-			.flags = GPIOF_IN,
-			.label = "reset",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LS_LED", /* LED7 */
-		.pin = {
-			.gpio = AT91_PIN_PA14,
-#if LED_LS_CONTROLLABLE
-			.flags = GPIOF_OUT_INIT_HIGH,
-#else
-			.flags = GPIOF_IN,
-#endif
-			.label = "led-ls",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "STATUS_LED", /* LED2 */
-		.pin = {
-			.gpio = AT91_PIN_PA24,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "led-status",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED5",
-		.pin = {
-			.gpio = AT91_PIN_PA25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-cd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED5",
-		.pin = {
-			.gpio = AT91_PIN_PA25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-a",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED1",
-		.pin = {
-			.gpio = AT91_PIN_PA26,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig1",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED1",
-		.pin = {
-			.gpio = AT91_PIN_PA26,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-b",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PA27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig2",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PA27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-c",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PA28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig3",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PA28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-d",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "WIFI_BT_ULPWKUP",
-		.pin = {
-			.gpio = AT91_PIN_PA0,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-ulpwkup",
-		},
-		.capability = CAPA_WIFI,
-	},
-	{
-		.name = "WIFI_BT_LPWKUP",
-		.pin = {
-			.gpio = AT91_PIN_PA6,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-lpwkup",
-		},
-		.capability = CAPA_WIFI,
-	},
-	{
-		.name = "WIFI_BT_INT",
-		.pin = {
-			.gpio = AT91_PIN_PB11,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-int",
-		},
-		.capability = CAPA_WIFI,
-	},
-	{
-		.name = "WIFI_BT_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD14,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "wifi-bt-reset",
-		},
-		.capability = CAPA_WIFI,
-	},
-	{
-		.name = "GNSS_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "gnss-reset",
-		},
-		.capability = CAPA_GPS,
-	},
-	{
-		.name = "SECURE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD16,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "secure-reset",
-		}
-	},
-	{
-		.name = "MTQ_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "mtq-reset",
-		}
-	},
-	{
-		.name = "USBHUB_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "usbhub-reset",
-		}
-	},
-	{
-		.name = "GNSS_INT",
-		.pin = {
-			.gpio = AT91_PIN_PD19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "gnss-int",
-		},
-		.capability = CAPA_GPS,
-	},
-	{
-		.name = "WIFI_BT_LPMODE",
-		.pin = {
-			.gpio = AT91_PIN_PD20,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-lpmode",
-		},
-		.capability = CAPA_WIFI,
-	},
-	{ },
-};
-
-static DEVICE_ATTR_MTS(dev_attr_wifi_bt_lpwkup, "wifi-bt-lpwkup",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-static DEVICE_ATTR_MTS(dev_attr_wifi_bt_ulpwkup, "wifi-bt-ulpwkup",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-static DEVICE_ATTR_MTS(dev_attr_wifi_bt_reset, "wifi-bt-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-static DEVICE_ATTR_RO_MTS(dev_attr_wifi_bt_lpmode, "wifi-bt-lpmode",
-	mts_attr_show_gpio_pin);
-static DEVICE_ATTR_RO_MTS(dev_attr_wifi_bt_int, "wifi-bt-int",
-	mts_attr_show_gpio_pin);
-static DEVICE_ATTR_MTS(dev_attr_gnss_reset, "gnss-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-static DEVICE_ATTR_MTS(dev_attr_usbhub_reset, "usbhub-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-static DEVICE_ATTR_MTS(dev_attr_eth_reset, "eth-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-static DEVICE_ATTR_MTS(dev_attr_gnss_int, "gnss-int",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-
-
-static struct attribute *mtcdt_platform_attributes[] = {
-	&dev_attr_vendor_id.attr,
-	&dev_attr_product_id.attr,
-	&dev_attr_device_id.attr,
-	&dev_attr_uuid.attr,
-	&dev_attr_hw_version.attr,
-	&dev_attr_imei.attr,
-	&dev_attr_eth_mac.attr,
-	&dev_attr_has_radio.attr,
-	&dev_attr_reset.attr,
-	&dev_attr_reset_monitor.attr,
-	&dev_attr_reset_monitor_intervals.attr,
-
-	&dev_attr_led_status.attr,
-	&dev_attr_led_cd_gpio.attr,
-	&dev_attr_led_sig1_gpio.attr,
-	&dev_attr_led_sig2_gpio.attr,
-	&dev_attr_led_sig3_gpio.attr,
-
-	&dev_attr_led_a_gpio.attr,
-	&dev_attr_led_b_gpio.attr,
-	&dev_attr_led_c_gpio.attr,
-	&dev_attr_led_d_gpio.attr,
-	&dev_attr_eth_reset.attr,
-
-        &dev_attr_radio_power.attr,
-	&dev_attr_radio_reset.attr,
-
-	&dev_attr_radio_reset_backoffs.attr,
-	&dev_attr_radio_reset_backoff_index.attr,
-	&dev_attr_radio_reset_backoff_seconds.attr,
-	NULL,
-};
-
-static struct attribute *mtcdt_0_1_platform_attributes[] = {
-	&dev_attr_vendor_id.attr,
-	&dev_attr_product_id.attr,
-	&dev_attr_device_id.attr,
-	&dev_attr_uuid.attr,
-	&dev_attr_hw_version.attr,
-	&dev_attr_imei.attr,
-	&dev_attr_eth_mac.attr,
-	&dev_attr_has_radio.attr,
-	&dev_attr_reset.attr,
-	&dev_attr_reset_monitor.attr,
-	&dev_attr_reset_monitor_intervals.attr,
-
-	&dev_attr_led_status.attr,
-	&dev_attr_led_cd_gpio.attr,
-	&dev_attr_led_sig1_gpio.attr,
-	&dev_attr_led_sig2_gpio.attr,
-	&dev_attr_led_sig3_gpio.attr,
-
-	&dev_attr_led_a_gpio.attr,
-	&dev_attr_led_b_gpio.attr,
-	&dev_attr_led_c_gpio.attr,
-	&dev_attr_led_d_gpio.attr,
-
-	&dev_attr_usbhub_reset.attr,
-	&dev_attr_eth_reset.attr,
-
-        // radio feature is last to be able to
-        // easily remove radio.
-        // is_radio_power_attr_mtcdt() searches
-        // for this for truncation.
-        &dev_attr_radio_power.attr,  /* Must be first radio attribute */
-	&dev_attr_radio_reset.attr,
-
-	&dev_attr_radio_reset_backoffs.attr,
-	&dev_attr_radio_reset_backoff_index.attr,
-	&dev_attr_radio_reset_backoff_seconds.attr,
-
-	NULL,
-};
-
-static struct attribute *mtcdt_0_1_wifi_bt_attributes[] = {
-		&dev_attr_wifi_bt_lpwkup.attr,
-		&dev_attr_wifi_bt_ulpwkup.attr,
-		&dev_attr_wifi_bt_reset.attr,
-		&dev_attr_wifi_bt_lpmode.attr,
-		&dev_attr_wifi_bt_int.attr,
-};
-
-static struct attribute *mtcdt_0_1_gnss_attributes[] = {
-		&dev_attr_gnss_reset.attr,
-		&dev_attr_gnss_int.attr,
-};
-
-
-static struct attribute_group mtcdt_platform_attribute_group = {
-	.attrs = mtcdt_platform_attributes
-};
-static struct attribute_group mtcdt_0_1_platform_attribute_group = {
-	.attrs = mtcdt_0_1_platform_attributes
-};
-
-
-static int
-is_radio_power_attr_mtcdt(struct attribute *attr)
-{
-    return (attr ==  &dev_attr_radio_power.attr);
-}
-/*  End of mths.c */
-
+/* include per-device pins and attributes */
+#include "mtcdt.c"
 #include "mtcap.c"
 #include "mtr.c"
 #include "mths.c"
@@ -1041,7 +562,6 @@ is_radio_power_attr_mtcdt(struct attribute *attr)
 /* include capabilities sub-directory support */
 #include "mts_capab.c"
 
-
 struct attribute **freelater = NULL; // Storage to free when driver is unloaded.
 
 static int 
@@ -1320,7 +840,6 @@ mts_id_eeprom_load(void)
 static void cleanup(void)
 {
 	log_info("cleaning up....");
-
 	if (mts_io_platform_device) {
 		platform_device_unregister(mts_io_platform_device);
 	}