Support mtcpm CPU board4.3.0

1 files changed, 0 insertions, 1994 deletions

diff --git a/io-module/mtr.c b/io-module/mtr.c
deleted file mode 100644
index e47beae..0000000
--- a/io-module/mtr.c
+++ /dev/null
@@ -1,1994 +0,0 @@
-#include "at91gpio.h"
-static struct gpio_pin gpio_pins_mtr_0_0[] = {
-	{
-		.name = "ETH_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC6,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "eth-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER_MONITOR",
-		.pin = {
-			.gpio = AT91_PIN_PA23,
-			.flags = GPIOF_IN,
-			.label = "radio-power-monitor",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PA22,
-			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
-			.label = "radio-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER",
-		.pin = {
-			.gpio = AT91_PIN_PA21,
-			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
-			.label = "radio-power",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "DEVICE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-			.flags = GPIOF_IN,
-			.label = "reset",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC16,
-#if LED_LS_CONTROLLABLE
-			.flags = GPIOF_OUT_INIT_HIGH,
-#else
-			.flags = GPIOF_IN,
-#endif
-			.label = "led-ls",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "STATUS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC21,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "led-status",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-wifi",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-b",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-cd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-c",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig1",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-d",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig2",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-e",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig3",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-f",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "RI_B",
-		.pin = {
-			.gpio = AT91_PIN_PC25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-ri",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DTR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC26,
-			.flags = GPIOF_IN,
-			.label = "extserial-dtr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DSR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dsr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DCD_B",
-		.pin = {
-			.gpio = AT91_PIN_PC28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dcd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "BT_EN",
-		.pin = {
-			.gpio = AT91_PIN_PA28,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "bt-enabled",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "WLAN_EN",
-		.pin = {
-			.gpio = AT91_PIN_PA27,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "wlan-enabled",
-		},
-		.active_low = 0,
-	},
-	{ },
-};
-
-static struct gpio_pin gpio_pins_mtr_0_1[] = {
-	{
-		.name = "ETH_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC6,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "eth-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER_MONITOR",
-		.pin = {
-			.gpio = AT91_PIN_PA23,
-			.flags = GPIOF_IN,
-			.label = "radio-power-monitor",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PA22,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER",
-		.pin = {
-			.gpio = AT91_PIN_PA21,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-power",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "DEVICE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-			.flags = GPIOF_IN,
-			.label = "reset",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC16,
-#if LED_LS_CONTROLLABLE
-			.flags = GPIOF_OUT_INIT_HIGH,
-#else
-			.flags = GPIOF_IN,
-#endif
-			.label = "led-ls",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "STATUS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC21,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "led-status",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-wifi",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-b",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-cd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-c",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig1",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-d",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig2",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-e",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig3",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-f",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "RI_B",
-		.pin = {
-			.gpio = AT91_PIN_PC25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-ri",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DTR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC26,
-			.flags = GPIOF_IN,
-			.label = "extserial-dtr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DSR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dsr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DCD_B",
-		.pin = {
-			.gpio = AT91_PIN_PC28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dcd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "BT_EN",
-		.pin = {
-			.gpio = AT91_PIN_PA28,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "bt-enabled",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "WLAN_EN",
-		.pin = {
-			.gpio = AT91_PIN_PA27,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "wlan-enabled",
-		},
-		.active_low = 0,
-	},
-	{ },
-};
-
-static struct gpio_pin gpio_pins_mtrv1_0_0[] = {
-	{
-		.name = "ETH_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC6,
-			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
-			.label = "eth-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER_MONITOR",
-		.pin = {
-			.gpio = AT91_PIN_PA23,
-			.flags = GPIOF_IN,
-			.label = "radio-power-monitor",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PA22,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER",
-		.pin = {
-			.gpio = AT91_PIN_PA21,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-power",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "DEVICE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-			.flags = GPIOF_IN,
-			.label = "reset",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-#if LED_LS_CONTROLLABLE
-			.flags = GPIOF_OUT_INIT_HIGH,
-#else
-			.flags = GPIOF_IN,
-#endif
-			.label = "led-ls",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "STATUS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC21,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "led-status",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-wifi",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-b",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-cd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-c",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig1",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-d",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig2",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-e",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig3",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-f",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "RI_B",
-		.pin = {
-			.gpio = AT91_PIN_PC25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-ri",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DTR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC26,
-			.flags = GPIOF_IN,
-			.label = "extserial-dtr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DSR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dsr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DCD_B",
-		.pin = {
-			.gpio = AT91_PIN_PC28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dcd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "BT_EN",
-		.pin = {
-			.gpio = AT91_PIN_PA28,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "bt-enabled",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "WLAN_EN",
-		.pin = {
-			.gpio = AT91_PIN_PA27,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "wlan-enabled",
-		},
-		.active_low = 0,
-	},
-	{ },
-};
-
-
-static struct gpio_pin gpio_pins_mtrv1_0_1[] = {
-	{
-		.name = "ETH_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC6,
-			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
-			.label = "eth-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER_MONITOR",
-		.pin = {
-			.gpio = AT91_PIN_PA23,
-			.flags = GPIOF_IN,
-			.label = "radio-power-monitor",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PA22,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER",
-		.pin = {
-			.gpio = AT91_PIN_PA21,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-power",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "DEVICE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-			.flags = GPIOF_IN,
-			.label = "reset",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-#if LED_LS_CONTROLLABLE
-			.flags = GPIOF_OUT_INIT_HIGH,
-#else
-			.flags = GPIOF_IN,
-#endif
-			.label = "led-ls",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "STATUS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC21,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "led-status",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-wifi",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-b",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-cd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-c",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig1",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-d",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig2",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-e",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig3",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-f",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "RI_B",
-		.pin = {
-			.gpio = AT91_PIN_PC25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-ri",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DTR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC26,
-			.flags = GPIOF_IN,
-			.label = "extserial-dtr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DSR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dsr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DCD_B",
-		.pin = {
-			.gpio = AT91_PIN_PC28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dcd",
-		},
-		.active_low = 1,
-	},
-
-	// The difference between MTRv1_0_0 and MTRv1_0_1 starts here
-	{
-		.name = "WIFI_BT_ULPWKUP",
-		.pin = {
-			.gpio = AT91_PIN_PA0,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-ulpwkup",
-		}
-	},
-	{
-		.name = "WIFI_BT_LPWKUP",
-		.pin = {
-			.gpio = AT91_PIN_PA6,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-lpwkup",
-		}
-	},
-	{
-		.name = "WIFI_BT_INT",
-		.pin = {
-			.gpio = AT91_PIN_PB11,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-int",
-		}
-	},
-	{
-		.name = "WIFI_BT_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD14,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "wifi-bt-reset",
-		}
-	},
-	{
-		.name = "WIFI_BT_LPMODE",
-		.pin = {
-			.gpio = AT91_PIN_PD20,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-lpmode",
-		}
-	},
-	{
-		.name = "GNSS_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "gnss-reset",
-		}
-	},
-	{
-		.name = "SECURE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD16,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "secure-reset",
-		}
-	},
-	{
-		.name = "USBHUB_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "usbhub-reset",
-		}
-	},
-	{
-		.name = "GNSS_INT",
-		.pin = {
-			.gpio = AT91_PIN_PD19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "gnss-int",
-		}
-	},
-
-
-	{ },
-};
-
-static struct gpio_pin gpio_pins_mtrv1_0_2[] = {
-	{
-		.name = "ETH_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC6,
-			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
-			.label = "eth-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER_MONITOR",
-		.pin = {
-			.gpio = AT91_PIN_PA23,
-			.flags = GPIOF_IN,
-			.label = "radio-power-monitor",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PA22,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-reset",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "RADIO_POWER",
-		.pin = {
-			.gpio = AT91_PIN_PA21,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "radio-power",
-		},
-		.active_low = 0,
-	},
-	{
-		.name = "DEVICE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-			.flags = GPIOF_IN,
-			.label = "reset",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC4,
-#if LED_LS_CONTROLLABLE
-			.flags = GPIOF_OUT_INIT_HIGH,
-#else
-			.flags = GPIOF_IN,
-#endif
-			.label = "led-ls",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "STATUS_LED",
-		.pin = {
-			.gpio = AT91_PIN_PC21,
-			.flags = GPIOF_OUT_INIT_LOW,
-			.label = "led-status",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-wifi",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED3",
-		.pin = {
-			.gpio = AT91_PIN_PC15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-b",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-cd",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED4",
-		.pin = {
-			.gpio = AT91_PIN_PC20,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-c",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig1",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED6",
-		.pin = {
-			.gpio = AT91_PIN_PC19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-d",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig2",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED7",
-		.pin = {
-			.gpio = AT91_PIN_PC18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-e",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-sig3",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "LED8",
-		.pin = {
-			.gpio = AT91_PIN_PC17,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "led-f",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "RI_B",
-		.pin = {
-			.gpio = AT91_PIN_PC25,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-ri",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DTR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC26,
-			.flags = GPIOF_IN,
-			.label = "extserial-dtr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DSR_B",
-		.pin = {
-			.gpio = AT91_PIN_PC27,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dsr",
-		},
-		.active_low = 1,
-	},
-	{
-		.name = "DCD_B",
-		.pin = {
-			.gpio = AT91_PIN_PC28,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "extserial-dcd",
-		},
-		.active_low = 1,
-	},
-
-	// The difference between MTRv1_0_0 and MTRv1_0_1 starts here
-	{
-		.name = "WIFI_BT_ULPWKUP",
-		.pin = {
-			.gpio = AT91_PIN_PA0,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-ulpwkup",
-		}
-	},
-	{
-		.name = "WIFI_BT_LPWKUP",
-		.pin = {
-			.gpio = AT91_PIN_PA6,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-lpwkup",
-		}
-	},
-	{
-		.name = "WIFI_BT_INT",
-		.pin = {
-			.gpio = AT91_PIN_PB11,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-int",
-		}
-	},
-	{
-		.name = "WIFI_BT_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD14,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "wifi-bt-reset",
-		}
-	},
-	{
-		.name = "WIFI_BT_LPMODE",
-		.pin = {
-			.gpio = AT91_PIN_PD20,
-			.flags = GPIOF_IN,
-			.label = "wifi-bt-lpmode",
-		}
-	},
-	{
-		.name = "GNSS_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD15,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "gnss-reset",
-		}
-	},
-	{
-		.name = "SECURE_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD16,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "secure-reset",
-		}
-	},
-	{
-		.name = "USBHUB_RESET",
-		.pin = {
-			.gpio = AT91_PIN_PD18,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "usbhub-reset",
-		}
-	},
-	{
-		.name = "GNSS_INT",
-		.pin = {
-			.gpio = AT91_PIN_PD19,
-			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "gnss-int",
-		}
-	},
-        // Difference with mtrv1_0_1 starts here
-        {
-                .name = "RADIO_WM_LK_M",  // WM LINK Monitor for CAT M
-                .pin = {
-                        .gpio = AT91_PIN_PA14,
-			.flags = GPIOF_IN,
-			.label = "radio-wm-lk-m",
-		}
-	},
-
-	{ },
-};
-
-static struct gpio_pin gpio_pins_mtrv1_0_3[] = {
-       {
-               .name = "ETH_RESET",
-               .pin = {
-                       .gpio = AT91_PIN_PC6,
-                       .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
-                       .label = "eth-reset",
-               },
-               .active_low = 0,
-       },
-       {
-               .name = "DEVICE_RESET",
-               .pin = {
-                       .gpio = AT91_PIN_PC4,
-                       .flags = GPIOF_IN,
-                       .label = "reset",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LS_LED",
-               .pin = {
-                       .gpio = AT91_PIN_PC4,
-#if LED_LS_CONTROLLABLE
-                       .flags = GPIOF_OUT_INIT_HIGH,
-#else
-                       .flags = GPIOF_IN,
-#endif
-                       .label = "led-ls",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "STATUS_LED",
-               .pin = {
-                       .gpio = AT91_PIN_PC21,
-                       .flags = GPIOF_OUT_INIT_LOW,
-                       .label = "led-status",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED3",
-               .pin = {
-                       .gpio = AT91_PIN_PC15,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-wifi",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED3",
-               .pin = {
-                       .gpio = AT91_PIN_PC15,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-b",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED4",
-               .pin = {
-                       .gpio = AT91_PIN_PC20,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-cd",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED4",
-               .pin = {
-                       .gpio = AT91_PIN_PC20,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-c",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED6",
-               .pin = {
-                       .gpio = AT91_PIN_PC19,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-sig1",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED6",
-               .pin = {
-                       .gpio = AT91_PIN_PC19,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-d",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED7",
-               .pin = {
-                       .gpio = AT91_PIN_PC18,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-sig2",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED7",
-               .pin = {
-                       .gpio = AT91_PIN_PC18,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-e",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED8",
-               .pin = {
-                       .gpio = AT91_PIN_PC17,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-sig3",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "LED8",
-               .pin = {
-                       .gpio = AT91_PIN_PC17,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "led-f",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "RI_B",
-               .pin = {
-                       .gpio = AT91_PIN_PC25,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "extserial-ri",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "DTR_B",
-               .pin = {
-                       .gpio = AT91_PIN_PC26,
-                       .flags = GPIOF_IN,
-                       .label = "extserial-dtr",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "DSR_B",
-               .pin = {
-                       .gpio = AT91_PIN_PC27,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "extserial-dsr",
-               },
-               .active_low = 1,
-       },
-       {
-               .name = "DCD_B",
-               .pin = {
-                       .gpio = AT91_PIN_PC28,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "extserial-dcd",
-               },
-               .active_low = 1,
-       },
-
-       // The difference between MTRv1_0_0 and MTRv1_0_1 starts here
-      {
-               .name = "WIFI_BT_ULPWKUP",
-               .pin = {
-                       .gpio = AT91_PIN_PA0,
-                       .flags = GPIOF_IN,
-                       .label = "wifi-bt-ulpwkup",
-               }
-       },
-      {
-               .name = "WIFI_BT_LPWKUP",
-               .pin = {
-                       .gpio = AT91_PIN_PA6,
-                       .flags = GPIOF_IN,
-                       .label = "wifi-bt-lpwkup",
-               }
-       },
-       {
-               .name = "WIFI_BT_INT",
-               .pin = {
-                       .gpio = AT91_PIN_PB11,
-                       .flags = GPIOF_IN,
-                       .label = "wifi-bt-int",
-               }
-       },
-       {
-               .name = "WIFI_BT_RESET",
-               .pin = {
-                       .gpio = AT91_PIN_PD14,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "wifi-bt-reset",
-               }
-       },
-       {
-               .name = "WIFI_BT_LPMODE",
-               .pin = {
-                       .gpio = AT91_PIN_PD20,
-                       .flags = GPIOF_IN,
-                       .label = "wifi-bt-lpmode",
-               }
-       },
-       {
-               .name = "GNSS_RESET",
-               .pin = {
-                       .gpio = AT91_PIN_PD15,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "gnss-reset",
-               }
-       },
-       {
-               .name = "SECURE_RESET",
-               .pin = {
-                       .gpio = AT91_PIN_PD16,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "secure-reset",
-               }
-       },
-       {
-               .name = "MTQ_RESET",
-               .pin = {
-                       .gpio = AT91_PIN_PD17,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "radio-reset",
-               }
-       },
-       {
-               .name = "USBHUB_RESET",
-               .pin = {
-                       .gpio = AT91_PIN_PD18,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "usbhub-reset",
-               }
-       },
-       {
-               .name = "GNSS_INT",
-               .pin = {
-                       .gpio = AT91_PIN_PD19,
-                       .flags = GPIOF_OUT_INIT_HIGH,
-                       .label = "gnss-int",
-               }
-       },
-        // Difference with mtrv1_0_1 starts here
-        {
-                .name = "RADIO_WM_LK_M",  // WM LINK Monitor for CAT M
-                .pin = {
-                        .gpio = AT91_PIN_PA14,
-                       .flags = GPIOF_IN,
-                       .label = "radio-wm-lk-m",
-               }
-       },
-
-       { },
-};
-
-/* radio control (power/reset) for mtr */
-static int radio_off_mtr(void)
-{
-	int value;
-	struct gpio_pin *pwrmon_pin = gpio_pin_by_attr_name("radio-power-monitor");
-	struct gpio_pin *onoff_pin = gpio_pin_by_attr_name("radio-power");
-	struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset");
-
-	if (!onoff_pin || !pwrmon_pin || !rst_pin) {
-		return -ENODEV;
-	}
-
-	value = gpio_get_value(pwrmon_pin->pin.gpio);
-	if(value == 0) {
-		log_error("radio is already off");
-		return -EINVAL;
-	}
-
-	// drive on/off pin low for at least 3 sec
-	log_info("shutting down radio");
-	gpio_set_value(onoff_pin->pin.gpio, 0);
-
-	msleep(3500);
-
-	// set on/off pin high
-	gpio_set_value(onoff_pin->pin.gpio, 1);
-
-	msleep(200);
-
-	// check that power is low
-	value = gpio_get_value(pwrmon_pin->pin.gpio);
-	if(value != 0) {
-		log_warning("radio is still on. performing radio reset.");
-		//Perform Hard Reset
-		gpio_set_value(rst_pin->pin.gpio, 0);
-
-		msleep(500);
-
-		// set pin high
-		gpio_set_value(rst_pin->pin.gpio, 1);
-	} else {
-		log_info("radio has been shut down");
-	}
-
-	return 0;
-}
-
-static int radio_on_mtr(void)
-{
-	int value;
-	struct gpio_pin *pwrmon_pin = gpio_pin_by_attr_name("radio-power-monitor");
-	struct gpio_pin *onoff_pin = gpio_pin_by_attr_name("radio-power");
-	struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset");
-
-	if (!onoff_pin || !pwrmon_pin || !rst_pin) {
-		return -ENODEV;
-	}
-
-	value = gpio_get_value(pwrmon_pin->pin.gpio);
-	if(value != 0) {
-		log_error("radio is already on");
-		return -EINVAL;
-	}
-
-	// drive on/off pin low for at least 5 sec
-	log_info("turning on radio");
-	gpio_set_value(onoff_pin->pin.gpio, 0);
-
-	msleep(5500);
-
-	// set on/off pin high
-	gpio_set_value(onoff_pin->pin.gpio, 1);
-
-	msleep(200);
-
-	// check that power is high
-	value = gpio_get_value(pwrmon_pin->pin.gpio);
-	if(value == 0) {
-		log_warning("radio is still off. performing radio reset");
-		//Perform Hard Reset
-		gpio_set_value(rst_pin->pin.gpio, 0);
-
-		msleep(500);
-
-		// set pin high
-		gpio_set_value(rst_pin->pin.gpio, 1);
-	} else {
-		log_info("radio has been turned on");
-	}
-
-	return 0;
-}
-
-static int radio_reset_mtr(void)
-{
-	struct gpio_pin *onoff_pin = gpio_pin_by_attr_name("radio-power");
-	struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset");
-
-	if (!rst_pin || !onoff_pin) {
-		return -ENODEV;
-	}
-
-	// drive reset pin low for 500ms
-	gpio_set_value(rst_pin->pin.gpio, 0);
-
-	msleep(500);
-
-	// set pin high
-	gpio_set_value(rst_pin->pin.gpio, 1);
-
-	// wait for 2 sec before toggling on/off pin
-	msleep(2000);
-
-	// drive on/off pin low for 6 sec
-	gpio_set_value(onoff_pin->pin.gpio, 0);
-
-	msleep(6000);
-
-	// set on/off pin high
-	gpio_set_value(onoff_pin->pin.gpio, 1);
-	return 0;
-}
-
-static int radio_reset_mtr_mtq(void)
-{
-	struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset");
-
-	if (!rst_pin) {
-		return -ENODEV;
-	}
-
-	// drive reset pin low for 500ms
-	gpio_set_value(rst_pin->pin.gpio, 0);
-
-	msleep(500);
-
-	// set pin high
-	gpio_set_value(rst_pin->pin.gpio, 1);
-
-	// wait for 2 sec before toggling on/off pin
-	msleep(2000);
-
-	return 0;
-}
-
-static ssize_t mts_attr_store_radio_power_mtr(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int value;
-	int err;
-
-	if (sscanf(buf, "%i", &value) != 1) {
-		return -EINVAL;
-	}
-	if (value == 0) {
-		mutex_lock(&mts_io_mutex);
-		err = radio_off_mtr();
-		mutex_unlock(&mts_io_mutex);
-	} else {
-		mutex_lock(&mts_io_mutex);
-		err = radio_on_mtr();
-		mutex_unlock(&mts_io_mutex);
-	}
-
-	if (err) {
-		return err;
-	}
-
-	return count;
-}
-
-static ssize_t mts_attr_store_radio_reset_mtr(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int value; /* 0 = normal reset; -1 = forced reset */
-	int err;
-
-	if (sscanf(buf, "%i", &value) != 1) {
-		return -EINVAL;
-	}
-	if (value != 0 && value != -1) {
-		return -EINVAL;
-	}
-
-	/* check reset timings is enabled */
-	if (value != -1 && NULL != timings_data) {
-		/* check reset timer is started */
-		if (radio_reset_timer_is_start == 1) {
-			log_info("radio reset timer is running. \n");
-			return count;
-		}
-
-		/* check reset timer available is started */
-		if (radio_reset_available_timer_is_start == 1) {
-			del_timer(&radio_reset_available_timer);
-			radio_reset_available_timer_is_start = 0;
-		}
-
-		/* reset timer not started, start it */
-		mod_timer(&radio_reset_timer, jiffies + msecs_to_jiffies((timings_data[timings_data_index]) * 1000));
-		//log_info("radio reset timer is start = [%d]\n", time_now_secs());
-		/* save timings_data_stop_seconds */
-		timings_data_stop_seconds = timings_data[timings_data_index] + time_now_secs();
-		radio_reset_timer_is_start = 1;
-	}
-
-	log_info("radio is reset\n");
-
-	mutex_lock(&mts_io_mutex);
-
-	if (mts_hw_version == MTRV1_0_3)
-	{
-        err = radio_reset_mtr_mtq();
-	}
-	else
-	{
-	    err = radio_reset_mtr();
-	}
-
-
-	mutex_unlock(&mts_io_mutex);
-
-	if (err) {
-		return err;
-	}
-
-	return count;
-}
-
-static ssize_t mts_attr_show_radio_power(struct device *dev,
-			struct device_attribute *attr, char *buf)
-{
-	int value;
-	struct gpio_pin *pwrmon_pin = gpio_pin_by_attr_name("radio-power-monitor");
-
-	if ( !pwrmon_pin ) {
-		return -ENODEV;
-	}
-
-	value = gpio_get_value(pwrmon_pin->pin.gpio);
-	return sprintf(buf, "%d\n", value);
-}
-
-static DEVICE_ATTR_MTS(dev_attr_radio_power_mtr, "radio-power",
-	mts_attr_show_radio_power, mts_attr_store_radio_power_mtr);
-
-static DEVICE_ATTR_MTS(dev_attr_radio_reset_mtr, "radio-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_radio_reset_mtr);
-
-static DEVICE_ATTR_MTS(dev_attr_eth_reset_mtr, "eth-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_bt_enabled_mtr, "bt-enabled",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_wlan_enabled_mtr, "wlan-enabled",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_led_wifi_gpio_mtr, "led-wifi",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_led_f_gpio_mtr, "led-f",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_extserial_ri_gpio_mtr, "extserial-ri",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_RO_MTS(dev_attr_extserial_dtr_mtr, "extserial-dtr",
-	mts_attr_show_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_extserial_dsr_gpio_mtr, "extserial-dsr",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_extserial_dcd_gpio_mtr, "extserial-dcd",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_RO_MTS(dev_attr_wifi_mac_mtr, "mac-wifi",
-	mts_attr_show_product_info);
-
-static DEVICE_ATTR_MTS(dev_attr_wifi_bt_lpwkup_mtr, "wifi-bt-lpwkup",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_wifi_bt_ulpwkup_mtr, "wifi-bt-ulpwkup",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_wifi_bt_reset_mtr, "wifi-bt-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_RO_MTS(dev_attr_wifi_bt_lpmode_mtr, "wifi-bt-lpmode",
-	mts_attr_show_gpio_pin);
-
-static DEVICE_ATTR_RO_MTS(dev_attr_wifi_bt_int_mtr, "wifi-bt-int",
-	mts_attr_show_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_gnss_reset_mtr, "gnss-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_MTS(dev_attr_usbhub_reset_mtr, "usbhub-reset",
-	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
-
-static DEVICE_ATTR_RO_MTS(dev_attr_gnss_int_mtr, "gnss-int",
-	mts_attr_show_gpio_pin);
-
-static DEVICE_ATTR_RO_MTS(dev_attr_radio_wm_lk_m, "radio-wm-lk-m",
-	mts_attr_show_gpio_pin);
-
-
-static struct attribute *mtr_platform_attributes[] = {
-	&dev_attr_vendor_id.attr,
-	&dev_attr_product_id.attr,
-	&dev_attr_device_id.attr,
-	&dev_attr_uuid.attr,
-	&dev_attr_hw_version.attr,
-	&dev_attr_imei.attr,
-	&dev_attr_eth_mac.attr,
-	&dev_attr_has_radio.attr,
-	&dev_attr_wifi_mac_mtr.attr,
-	&dev_attr_reset.attr,
-	&dev_attr_reset_monitor.attr,
-	&dev_attr_reset_monitor_intervals.attr,
-
-	&dev_attr_extserial_ri_gpio_mtr.attr,
-	&dev_attr_extserial_dtr_mtr.attr,
-	&dev_attr_extserial_dsr_gpio_mtr.attr,
-	&dev_attr_extserial_dcd_gpio_mtr.attr,
-
-	&dev_attr_eth_reset_mtr.attr,
-	&dev_attr_bt_enabled_mtr.attr,
-	&dev_attr_wlan_enabled_mtr.attr,
-
-	&dev_attr_led_status.attr,
-	&dev_attr_led_cd_gpio.attr,
-	&dev_attr_led_sig1_gpio.attr,
-	&dev_attr_led_sig2_gpio.attr,
-	&dev_attr_led_sig3_gpio.attr,
-	&dev_attr_led_wifi_gpio_mtr.attr,
-
-	//&dev_attr_led_a_gpio.attr,
-	&dev_attr_led_b_gpio.attr,
-	&dev_attr_led_c_gpio.attr,
-	&dev_attr_led_d_gpio.attr,
-	&dev_attr_led_e_gpio.attr,
-	&dev_attr_led_f_gpio_mtr.attr,
-
-	/* Radio stuff moved to end for possible removal */
-	&dev_attr_radio_power_mtr.attr,  /* radio_power must be first */
-	&dev_attr_radio_reset_mtr.attr,
-
-	&dev_attr_radio_reset_backoffs.attr,
-	&dev_attr_radio_reset_backoff_index.attr,
-	&dev_attr_radio_reset_backoff_seconds.attr,
-
-	NULL,
-};
-
-static struct attribute_group mtr_platform_attribute_group = {
-	.attrs = mtr_platform_attributes
-};
-
-
-static struct attribute *mtrv1_0_1_platform_attributes[] = {
-	&dev_attr_vendor_id.attr,
-	&dev_attr_product_id.attr,
-	&dev_attr_device_id.attr,
-	&dev_attr_uuid.attr,
-	&dev_attr_hw_version.attr,
-	&dev_attr_imei.attr,
-	&dev_attr_eth_mac.attr,
-	&dev_attr_has_radio.attr,
-	&dev_attr_wifi_mac_mtr.attr,
-
-	&dev_attr_reset.attr,
-	&dev_attr_reset_monitor.attr,
-	&dev_attr_reset_monitor_intervals.attr,
-	&dev_attr_radio_power_mtr.attr,
-	&dev_attr_radio_reset_mtr.attr,
-
-	&dev_attr_radio_reset_backoffs.attr,
-	&dev_attr_radio_reset_backoff_index.attr,
-	&dev_attr_radio_reset_backoff_seconds.attr,
-
-	&dev_attr_extserial_ri_gpio_mtr.attr,
-	&dev_attr_extserial_dtr_mtr.attr,
-	&dev_attr_extserial_dsr_gpio_mtr.attr,
-	&dev_attr_extserial_dcd_gpio_mtr.attr,
-
-	&dev_attr_eth_reset_mtr.attr,
-	&dev_attr_wifi_bt_lpwkup_mtr.attr,
-	&dev_attr_wifi_bt_ulpwkup_mtr.attr,
-	&dev_attr_wifi_bt_reset_mtr.attr,
-	&dev_attr_wifi_bt_lpmode_mtr.attr,
-	&dev_attr_wifi_bt_int_mtr.attr,
-	&dev_attr_gnss_reset_mtr.attr,
-	&dev_attr_usbhub_reset_mtr.attr,
-	&dev_attr_gnss_int_mtr.attr,
-
-	&dev_attr_led_status.attr,
-	&dev_attr_led_cd_gpio.attr,
-	&dev_attr_led_sig1_gpio.attr,
-	&dev_attr_led_sig2_gpio.attr,
-	&dev_attr_led_sig3_gpio.attr,
-	&dev_attr_led_wifi_gpio_mtr.attr,
-
-	&dev_attr_led_b_gpio.attr,
-	&dev_attr_led_c_gpio.attr,
-	&dev_attr_led_d_gpio.attr,
-	&dev_attr_led_e_gpio.attr,
-	&dev_attr_led_f_gpio_mtr.attr,
-
-	NULL,
-};
-
-static struct attribute_group mtrv1_0_1_platform_attribute_group = {
-	.attrs = mtrv1_0_1_platform_attributes
-};
-
-static struct attribute *mtrv1_0_2_platform_attributes[] = {
-	&dev_attr_vendor_id.attr,
-	&dev_attr_product_id.attr,
-	&dev_attr_device_id.attr,
-	&dev_attr_uuid.attr,
-	&dev_attr_hw_version.attr,
-	&dev_attr_imei.attr,
-	&dev_attr_eth_mac.attr,
-	&dev_attr_has_radio.attr,
-	&dev_attr_wifi_mac_mtr.attr,
-
-	&dev_attr_reset.attr,
-	&dev_attr_reset_monitor.attr,
-	&dev_attr_reset_monitor_intervals.attr,
-	&dev_attr_radio_power_mtr.attr,
-	&dev_attr_radio_reset_mtr.attr,
-
-	&dev_attr_radio_reset_backoffs.attr,
-	&dev_attr_radio_reset_backoff_index.attr,
-	&dev_attr_radio_reset_backoff_seconds.attr,
-        
-	&dev_attr_extserial_ri_gpio_mtr.attr,
-	&dev_attr_extserial_dtr_mtr.attr,
-	&dev_attr_extserial_dsr_gpio_mtr.attr,
-	&dev_attr_extserial_dcd_gpio_mtr.attr,
-
-	&dev_attr_eth_reset_mtr.attr,
-	&dev_attr_wifi_bt_lpwkup_mtr.attr,
-	&dev_attr_wifi_bt_ulpwkup_mtr.attr,
-	&dev_attr_wifi_bt_reset_mtr.attr,
-	&dev_attr_wifi_bt_lpmode_mtr.attr,
-	&dev_attr_wifi_bt_int_mtr.attr,
-	&dev_attr_gnss_reset_mtr.attr,
-	&dev_attr_usbhub_reset_mtr.attr,
-	&dev_attr_gnss_int_mtr.attr,
-
-	&dev_attr_led_status.attr,
-	&dev_attr_led_cd_gpio.attr,
-	&dev_attr_led_sig1_gpio.attr,
-	&dev_attr_led_sig2_gpio.attr,
-	&dev_attr_led_sig3_gpio.attr,
-	&dev_attr_led_wifi_gpio_mtr.attr,
-
-	&dev_attr_led_b_gpio.attr,
-	&dev_attr_led_c_gpio.attr,
-	&dev_attr_led_d_gpio.attr,
-	&dev_attr_led_e_gpio.attr,
-	&dev_attr_led_f_gpio_mtr.attr,
-
-        &dev_attr_radio_wm_lk_m.attr,  // CAT M feature
-       
-	NULL,
-};
-
-static struct attribute_group mtrv1_0_2_platform_attribute_group = {
-	.attrs = mtrv1_0_2_platform_attributes
-};
-
-
-static struct attribute *mtrv1_0_3_platform_attributes[] = {
-       &dev_attr_vendor_id.attr,
-       &dev_attr_product_id.attr,
-       &dev_attr_device_id.attr,
-       &dev_attr_uuid.attr,
-       &dev_attr_hw_version.attr,
-       &dev_attr_imei.attr,
-       &dev_attr_eth_mac.attr,
-       &dev_attr_has_radio.attr,
-       &dev_attr_wifi_mac_mtr.attr,
-
-       &dev_attr_reset.attr,
-       &dev_attr_reset_monitor.attr,
-       &dev_attr_reset_monitor_intervals.attr,
-       &dev_attr_radio_reset_mtr.attr,
-
-       &dev_attr_radio_reset_backoffs.attr,
-       &dev_attr_radio_reset_backoff_index.attr,
-       &dev_attr_radio_reset_backoff_seconds.attr,
-
-       &dev_attr_extserial_ri_gpio_mtr.attr,
-       &dev_attr_extserial_dtr_mtr.attr,
-       &dev_attr_extserial_dsr_gpio_mtr.attr,
-       &dev_attr_extserial_dcd_gpio_mtr.attr,
-
-       &dev_attr_eth_reset_mtr.attr,
-       &dev_attr_wifi_bt_lpwkup_mtr.attr,
-       &dev_attr_wifi_bt_ulpwkup_mtr.attr,
-       &dev_attr_wifi_bt_reset_mtr.attr,
-       &dev_attr_wifi_bt_lpmode_mtr.attr,
-       &dev_attr_wifi_bt_int_mtr.attr,
-       &dev_attr_gnss_reset_mtr.attr,
-       &dev_attr_usbhub_reset_mtr.attr,
-       &dev_attr_gnss_int_mtr.attr,
-
-       &dev_attr_led_status.attr,
-       &dev_attr_led_cd_gpio.attr,
-       &dev_attr_led_sig1_gpio.attr,
-       &dev_attr_led_sig2_gpio.attr,
-       &dev_attr_led_sig3_gpio.attr,
-       &dev_attr_led_wifi_gpio_mtr.attr,
-
-       &dev_attr_led_b_gpio.attr,
-       &dev_attr_led_c_gpio.attr,
-       &dev_attr_led_d_gpio.attr,
-       &dev_attr_led_e_gpio.attr,
-       &dev_attr_led_f_gpio_mtr.attr,
-
-    &dev_attr_radio_wm_lk_m.attr,  // CAT M feature?  Is this still there on the MTQ with Quectel?
-
-       NULL,
-};
-
-static struct attribute_group mtrv1_0_3_platform_attribute_group = {
-       .attrs = mtrv1_0_3_platform_attributes
-};