mtp: add eth-reset sysfs node1.4.1

2 files changed, 66 insertions, 18 deletions

diff --git a/io-module/mtp.c b/io-module/mtp.c
index e6da3d5..74867e3 100644
--- a/io-module/mtp.c
+++ b/io-module/mtp.c
@@ -1,10 +1,10 @@
 static struct gpio_pin gpio_pins_mtp_0_0[] = {
 	{
-		.name = "ETH_EN",
+		.name = "ETH_RESET",
 		.pin = {
 			.gpio = AT91_PIN_PC6, // NETH_RST
 			.flags = GPIOF_OUT_INIT_HIGH,
-			.label = "eth-enabled",
+			.label = "eth-reset",
 		},
 	},
 	{
@@ -155,11 +155,11 @@ static int radio_off_mtp(void)
 
 	value = gpio_get_value(pwrmon_pin->pin.gpio);
 	if(value == 0) {
-		log_warning("radio is already off");
+		log_warning("cell radio is already off");
 		return 0;
 	}
 
-	log_info("turning off radio");
+	log_info("turning off cell radio");
 
 	// To turn OFF LE910 the pad ON/OFF# must be tied low for at least 2 seconds and then
 	// released. Same circuitry and timing for the power on must be used. When the hold
@@ -176,7 +176,7 @@ static int radio_off_mtp(void)
 		// check that power is low
 		value = gpio_get_value(pwrmon_pin->pin.gpio);
 		if (value != 0) {
-			log_info("radio is still on. keep waiting...");
+			log_info("cell radio is still on. keep waiting...");
 			msleep(2000);
 			continue;
 		}
@@ -184,10 +184,10 @@ static int radio_off_mtp(void)
 	}
 
 	if (value == 0) {
-		log_info("radio has been shut down");
+		log_info("cell radio has been shut down");
 	}
 	else {
-		log_warning("radio is still on. performing unconditional shutdown...");
+		log_warning("cell radio is still on. performing unconditional shutdown...");
 		radio_unconditional_shutdown_mtp();
 	}
 
@@ -208,11 +208,11 @@ static int radio_on_mtp(void)
 
 	value = gpio_get_value(pwrmon_pin->pin.gpio);
 	if(value != 0) {
-		log_warning("radio is already on");
+		log_warning("cell radio is already on");
 		return 0;
 	}
 
-	log_info("turning on radio");
+	log_info("turning on cell radio");
 
 	// drive on/off pin high for at least 1 seconoff_pin
 	gpio_set_value(onoff_pin->pin.gpio, 1);
@@ -225,9 +225,9 @@ static int radio_on_mtp(void)
 	// check that power is high
 	value = gpio_get_value(pwrmon_pin->pin.gpio);
 	if(value == 0) {
-		log_warning("radio is still off.");
+		log_warning("cell radio is still off.");
 	} else {
-		log_info("radio has been turned on");
+		log_info("cell radio has been turned on");
 	}
 
 	return 0;
@@ -247,14 +247,14 @@ static int radio_reset_mtp(void)
 	// Unconditional shutdown
 	//
 
-	log_info("performing unconditional radio shutdown");
+	log_info("performing unconditional cell radio shutdown");
 
 	radio_unconditional_shutdown_mtp();
 
 	//
 	// Turning on radio
 	//
-	log_info("turning on radio");
+	log_info("turning on cell radio");
 
 	// drive on/off pin high for at least 1 sec
 	gpio_set_value(onoff_pin->pin.gpio, 1);
@@ -311,7 +311,7 @@ static ssize_t mts_attr_store_radio_reset_mtp(struct device *dev,
 	if (NULL != timings_data) {
 		/* check reset timer is started */
 		if (radio_reset_timer_is_start == 1) {
-			log_info("radio reset timer is running. \n");
+			log_info("cell radio reset timer is running. \n");
 			return count;
 		}
 
@@ -406,6 +406,54 @@ static ssize_t mts_attr_store_lora_reset_mtp(struct device *dev,
 	return count;
 }
 
+static int eth_reset_mtp(void)
+{
+	struct gpio_pin *rst_pin = gpio_pin_by_attr_name("eth-reset");
+
+	if (!rst_pin) {
+		return -ENODEV;
+	}
+
+	/*
+	 * DS00002275A (09-15-16) KSZ8091MNX/RNB DATA SHEET:
+	 * 		For warm reset, the reset (RST#) pin should be asserted low for a minimum of 500 μs.
+	 */
+	gpio_set_value(rst_pin->pin.gpio, 0);
+
+	msleep(2);
+
+	gpio_set_value(rst_pin->pin.gpio, 1);
+
+	msleep(1);
+
+	return 0;
+}
+
+static ssize_t mts_attr_store_eth_reset_mtp(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int value;
+	int err;
+
+	if (sscanf(buf, "%i", &value) != 1) {
+		return -EINVAL;
+	}
+
+	log_info("performing eth reset");
+
+	mutex_lock(&mts_io_mutex);
+
+	err = eth_reset_mtp();
+
+	mutex_unlock(&mts_io_mutex);
+
+	if (err) {
+		return err;
+	}
+
+	return count;
+}
+
 static DEVICE_ATTR_MTS(dev_attr_radio_reset_mtp, "radio-reset",
 	mts_attr_show_gpio_pin, mts_attr_store_radio_reset_mtp);
 
@@ -415,8 +463,8 @@ static DEVICE_ATTR_MTS(dev_attr_radio_power_mtp, "radio-power",
 static DEVICE_ATTR_MTS(dev_attr_lora_reset_mtp, "lora-reset",
 		mts_attr_show_gpio_pin, mts_attr_store_lora_reset_mtp);
 
-static DEVICE_ATTR_MTS(dev_attr_eth_enabled_mtp, "eth-enabled",
-		mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
+static DEVICE_ATTR_MTS(dev_attr_eth_reset_mtp, "eth-reset",
+		mts_attr_show_gpio_pin, mts_attr_store_eth_reset_mtp);
 
 static DEVICE_ATTR_MTS(dev_attr_led_lora_gpio_mtp, "led-lora",
 	mts_attr_show_gpio_pin, mts_attr_store_gpio_pin);
@@ -436,7 +484,7 @@ static struct attribute *mtp_0_0_platform_attributes[] = {
 		&dev_attr_reset_monitor.attr,
 		&dev_attr_reset_monitor_intervals.attr,
 
-		&dev_attr_eth_enabled_mtp.attr,
+		&dev_attr_eth_reset_mtp.attr,
 
 		&dev_attr_lora_reset_mtp.attr,
 
diff --git a/io-module/mts_io.c b/io-module/mts_io.c
index 7dcdf54..7e3d1f0 100644
--- a/io-module/mts_io.c
+++ b/io-module/mts_io.c
@@ -47,7 +47,7 @@
 
 #include "mts_io.h"
 
-#define DRIVER_VERSION	"v1.4.0"
+#define DRIVER_VERSION	"v1.4.1"
 #define DRIVER_AUTHOR	"James Maki <jmaki@multitech.com>"
 #define DRIVER_DESC	"MTS-IO Controller"
 #define DRIVER_NAME	"mts-io"