Added support for the embedded CDP module called (MT100ECDP).

2 files changed, 527 insertions, 40 deletions

diff --git a/io-module/mts_io.c b/io-module/mts_io.c
index a921fdd..4697209 100644
--- a/io-module/mts_io.c
+++ b/io-module/mts_io.c
@@ -41,7 +41,7 @@
 
 #include "mts_io.h"
 
-#define DRIVER_VERSION	"v0.4.1"
+#define DRIVER_VERSION	"v0.4.2"
 #define DRIVER_AUTHOR	"James Maki <jmaki@multitech.com>"
 #define DRIVER_DESC	"MTCDP IO Controller"
 #define DRIVER_NAME	"mts-io"
@@ -260,6 +260,92 @@ static struct gpio_pin gpio_pins_mtcdp_1_0[] = {
 	{ },
 };
 
+static struct gpio_pin gpio_pins_mt100ecdp_0_0[] = {
+	{
+		.name = "ENIO",
+		.pin = AT91_PIN_PC15,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "ETH0_ENABLED",
+		.pin = AT91_PIN_PB31,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "RADIO_RESET",
+		.pin = AT91_PIN_PB30,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "DEVICE_RESET",
+		.pin = AT91_PIN_PA22,
+		.direction = GPIO_DIR_INPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+	},
+	{
+		.name = "LED3",
+		.pin = AT91_PIN_PC9,
+#if LED_LS_CONTROLLABLE
+		.direction = GPIO_DIR_OUTPUT,
+#else
+		.direction = GPIO_DIR_INPUT,
+#endif
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "LED2",
+		.pin = AT91_PIN_PA30,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "RSERSRC",
+		.pin = AT91_PIN_PC7,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "TXD1",
+		.pin = AT91_PIN_PB17,
+		.direction = GPIO_DIR_INPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+	},
+	{
+		.name = "DTR1",
+		.pin = AT91_PIN_PB18,
+		.direction = GPIO_DIR_INPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+	},
+	{
+		.name = "GPIO11",
+		.pin = AT91_PIN_PB19,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "GPIO12",
+		.pin = AT91_PIN_PB20,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{ },
+};
+
+
 struct gpio_pin *gpio_pin_by_name(const char *name) {
 	struct gpio_pin *pin;
 
@@ -293,6 +379,8 @@ static int mts_id_eeprom_load(void)
 		DEVICE_CAPA_SET(id_eeprom.capa, CAPA_GPS);
 
 		gpio_pins = gpio_pins_mtcdp_0_0;
+	} else if (!strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		gpio_pins = gpio_pins_mt100ecdp_0_0;
 	} else {
 		gpio_pins = gpio_pins_mtcdp_1_0;
 	}
@@ -882,21 +970,21 @@ static ssize_t mts_attr_store_dout(struct device *dev,
 		return -ENODEV;
 	}
 
-	if (!strcmp(attr->attr.name, "dout0")) {
+	if ((!strcmp(attr->attr.name, "dout0")) || (!strcmp(attr->attr.name, "gpo1"))) {
 		bit = BIT(0);
-	} else if (!strcmp(attr->attr.name, "dout1")) {
+	} else if ((!strcmp(attr->attr.name, "dout1")) || (!strcmp(attr->attr.name, "gpo2"))) {
 		bit = BIT(1);
-	} else if (!strcmp(attr->attr.name, "dout2")) {
+	} else if ((!strcmp(attr->attr.name, "dout2")) || (!strcmp(attr->attr.name, "gpo3"))) {
 		bit = BIT(2);
-	} else if (!strcmp(attr->attr.name, "dout3")) {
+	} else if ((!strcmp(attr->attr.name, "dout3")) || (!strcmp(attr->attr.name, "gpo4"))) {
 		bit = BIT(3);
-	} else if (!strcmp(attr->attr.name, "dout4")) {
+	} else if ((!strcmp(attr->attr.name, "dout4")) || (!strcmp(attr->attr.name, "led1"))) {
 		bit = BIT(4);
-	} else if (!strcmp(attr->attr.name, "dout5")) {
+	} else if ((!strcmp(attr->attr.name, "dout5")) || (!strcmp(attr->attr.name, "led4"))) {
 		bit = BIT(5);
-	} else if (!strcmp(attr->attr.name, "dout6")) {
+	} else if ((!strcmp(attr->attr.name, "dout6")) || (!strcmp(attr->attr.name, "led5"))) {
 		bit = BIT(6);
-	} else if (!strcmp(attr->attr.name, "dout7")) {
+	} else if ((!strcmp(attr->attr.name, "dout7")) || (!strcmp(attr->attr.name, "led6"))) {
 		bit = BIT(7);
 	} else {
 		log_notice("dout attr does not exist");
@@ -934,21 +1022,21 @@ static ssize_t mts_attr_show_dout(struct device *dev,
 		return -ENODEV;
 	}
 
-	if (!strcmp(attr->attr.name, "dout0")) {
+	if ((!strcmp(attr->attr.name, "dout0")) || (!strcmp(attr->attr.name, "gpo1"))) {
 		bit = BIT(0);
-	} else if (!strcmp(attr->attr.name, "dout1")) {
+	} else if ((!strcmp(attr->attr.name, "dout1")) || (!strcmp(attr->attr.name, "gpo2"))) {
 		bit = BIT(1);
-	} else if (!strcmp(attr->attr.name, "dout2")) {
+	} else if ((!strcmp(attr->attr.name, "dout2")) || (!strcmp(attr->attr.name, "gpo3"))) {
 		bit = BIT(2);
-	} else if (!strcmp(attr->attr.name, "dout3")) {
+	} else if ((!strcmp(attr->attr.name, "dout3")) || (!strcmp(attr->attr.name, "gpo4"))) {
 		bit = BIT(3);
-	} else if (!strcmp(attr->attr.name, "dout4")) {
+	} else if ((!strcmp(attr->attr.name, "dout4")) || (!strcmp(attr->attr.name, "led1"))) {
 		bit = BIT(4);
-	} else if (!strcmp(attr->attr.name, "dout5")) {
+	} else if ((!strcmp(attr->attr.name, "dout5")) || (!strcmp(attr->attr.name, "led4"))) {
 		bit = BIT(5);
-	} else if (!strcmp(attr->attr.name, "dout6")) {
+	} else if ((!strcmp(attr->attr.name, "dout6")) || (!strcmp(attr->attr.name, "led5"))) {
 		bit = BIT(6);
-	} else if (!strcmp(attr->attr.name, "dout7")) {
+	} else if ((!strcmp(attr->attr.name, "dout7")) || (!strcmp(attr->attr.name, "led6"))) {
 		bit = BIT(7);
 	} else {
 		log_notice("dout attr does not exist");
@@ -1049,17 +1137,17 @@ static ssize_t mts_attr_show_din(struct device *dev,
 		return -ENODEV;
 	}
 
-	if (!strcmp(attr->attr.name, "din0")) {
+	if ((!strcmp(attr->attr.name, "din0")) || (!strcmp(attr->attr.name, "gpi5"))) {
 		bit = BIT(0);
-	} else if (!strcmp(attr->attr.name, "din1")) {
+	} else if ((!strcmp(attr->attr.name, "din1")) || (!strcmp(attr->attr.name, "gpi6"))) {
 		bit = BIT(1);
-	} else if (!strcmp(attr->attr.name, "din2")) {
+	} else if ((!strcmp(attr->attr.name, "din2")) || (!strcmp(attr->attr.name, "gpi7"))) {
 		bit = BIT(2);
-	} else if (!strcmp(attr->attr.name, "din3")) {
+	} else if ((!strcmp(attr->attr.name, "din3")) || (!strcmp(attr->attr.name, "gpi8"))) {
 		bit = BIT(3);
-	} else if (!strcmp(attr->attr.name, "din4")) {
+	} else if ((!strcmp(attr->attr.name, "din4")) || (!strcmp(attr->attr.name, "gpi9"))) {
 		bit = BIT(4);
-	} else if (!strcmp(attr->attr.name, "din5")) {
+	} else if ((!strcmp(attr->attr.name, "din5")) || (!strcmp(attr->attr.name, "gpi10"))) {
 		bit = BIT(5);
 	} else if (!strcmp(attr->attr.name, "din6")) {
 		bit = BIT(6);
@@ -1255,7 +1343,14 @@ static ssize_t mts_attr_show_led_ls(struct device *dev,
 			char *buf)
 {
 	int value;
-	struct gpio_pin *pin = gpio_pin_by_name("LS_LED");
+	struct gpio_pin *pin;
+
+	if (!strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		pin = gpio_pin_by_name("LED3");
+	}
+	else {
+		pin = gpio_pin_by_name("LS_LED");
+	}
 
 	if (!pin) {
 		return -ENODEV;
@@ -1279,7 +1374,14 @@ static ssize_t mts_attr_store_led_ls(struct device *dev,
 {
 	int value;
 	int err;
-	struct gpio_pin *pin = gpio_pin_by_name("LS_LED");
+	struct gpio_pin *pin;
+
+	if (!strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		pin = gpio_pin_by_name("LED3");
+	}
+	else {
+		pin = gpio_pin_by_name("LS_LED");
+	}
 
 	if (!pin) {
 		return -ENODEV;
@@ -1587,6 +1689,357 @@ static struct device_attribute dev_attr_usbh2_ps_enabled = {
 };
 #endif
 
+
+static ssize_t mts_attr_show_led2(struct device *dev,
+			struct device_attribute *attr,
+			char *buf)
+{
+	int value;
+	struct gpio_pin *pin = gpio_pin_by_name("LED2");
+
+	if (!pin) {
+		return -ENODEV;
+	}
+
+	mutex_lock(&mts_io_mutex);
+
+	value = at91_get_gpio_value(pin->pin);
+
+	mutex_unlock(&mts_io_mutex);
+
+	if (value < 0) {
+		return value;
+	}
+
+	return sprintf(buf, "%d\n", !value);
+}
+
+static ssize_t mts_attr_store_led2(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int value;
+	int err;
+	struct gpio_pin *pin = gpio_pin_by_name("LED2");
+
+	if (!pin) {
+		return -ENODEV;
+	}
+
+	if (sscanf(buf, "%i", &value) != 1) {
+		return -EINVAL;
+	}
+
+	mutex_lock(&mts_io_mutex);
+
+	err = at91_set_gpio_value(pin->pin, !value);
+
+	mutex_unlock(&mts_io_mutex);
+
+	if (err) {
+		return err;
+	}
+
+	return count;
+}
+
+static ssize_t mts_attr_show_gpio11(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int value;
+	struct gpio_pin *pin = gpio_pin_by_name("GPIO11");
+
+	if (!pin) {
+		return -ENODEV;
+	}
+
+	mutex_lock(&mts_io_mutex);
+
+	value = at91_get_gpio_value(pin->pin);
+
+	mutex_unlock(&mts_io_mutex);
+
+	if (value < 0) {
+		return value;
+	}
+
+	return sprintf(buf, "%d\n", !value);
+}
+
+static ssize_t mts_attr_store_gpio11(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int value;
+	int err;
+	struct gpio_pin *pin = gpio_pin_by_name("GPIO11");
+
+	if (!pin) {
+		return -ENODEV;
+	}
+
+	if (sscanf(buf, "%i", &value) != 1) {
+		return -EINVAL;
+	}
+
+	mutex_lock(&mts_io_mutex);
+
+	err = at91_set_gpio_value(pin->pin, !value);
+
+	mutex_unlock(&mts_io_mutex);
+
+	return count;
+}
+
+static ssize_t mts_attr_show_gpio12(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int value;
+	struct gpio_pin *pin = gpio_pin_by_name("GPIO12");
+
+	if (!pin) {
+		return -ENODEV;
+	}
+
+	mutex_lock(&mts_io_mutex);
+
+	value = at91_get_gpio_value(pin->pin);
+
+	mutex_unlock(&mts_io_mutex);
+
+	if (value < 0) {
+		return value;
+	}
+
+	return sprintf(buf, "%d\n", !value);
+}
+
+static ssize_t mts_attr_store_gpio12(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int value;
+	int err;
+	struct gpio_pin *pin = gpio_pin_by_name("GPIO12");
+
+	if (!pin) {
+		return -ENODEV;
+	}
+
+	if (sscanf(buf, "%i", &value) != 1) {
+		return -EINVAL;
+	}
+
+	mutex_lock(&mts_io_mutex);
+
+	err = at91_set_gpio_value(pin->pin, !value);
+
+	mutex_unlock(&mts_io_mutex);
+
+	if (err) {
+		return err;
+	}
+
+	return count;
+}
+
+static struct device_attribute dev_attr_gpo1 = {
+	.attr = {
+		.name = "gpo1",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_gpo2 = {
+	.attr = {
+		.name = "gpo2",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_gpo3 = {
+	.attr = {
+		.name = "gpo3",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_gpo4 = {
+	.attr = {
+		.name = "gpo4",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_gpi5 = {
+	.attr = {
+		.name = "gpi5",
+		.mode = MTS_ATTR_MODE_RO,
+	},
+	.show = mts_attr_show_din,
+};
+
+static struct device_attribute dev_attr_gpi6 = {
+	.attr = {
+		.name = "gpi6",
+		.mode = MTS_ATTR_MODE_RO,
+	},
+	.show = mts_attr_show_din,
+};
+
+static struct device_attribute dev_attr_gpi7 = {
+	.attr = {
+		.name = "gpi7",
+		.mode = MTS_ATTR_MODE_RO,
+	},
+	.show = mts_attr_show_din,
+};
+
+static struct device_attribute dev_attr_gpi8 = {
+	.attr = {
+		.name = "gpi8",
+		.mode = MTS_ATTR_MODE_RO,
+	},
+	.show = mts_attr_show_din,
+};
+
+static struct device_attribute dev_attr_gpi9 = {
+	.attr = {
+		.name = "gpi9",
+		.mode = MTS_ATTR_MODE_RO,
+	},
+	.show = mts_attr_show_din,
+};
+
+static struct device_attribute dev_attr_gpi10 = {
+	.attr = {
+		.name = "gpi10",
+		.mode = MTS_ATTR_MODE_RO,
+	},
+	.show = mts_attr_show_din,
+};
+
+static struct device_attribute dev_attr_led1 = {
+	.attr = {
+		.name = "led1",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_led2 = {
+	.attr = {
+		.name = "led2",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_led2,
+	.store = mts_attr_store_led2,
+};
+
+static struct device_attribute dev_attr_led3 = {
+	.attr = {
+		.name = "led3",
+#if LED_LS_CONTROLLABLE
+		.mode = MTS_ATTR_MODE_RW,
+#else
+		.mode = MTS_ATTR_MODE_RO,
+#endif
+	},
+	.show = mts_attr_show_led_ls,
+	.store = mts_attr_store_led_ls,
+};
+
+static struct device_attribute dev_attr_led4 = {
+	.attr = {
+		.name = "led4",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_led5 = {
+	.attr = {
+		.name = "led5",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_led6 = {
+	.attr = {
+		.name = "led6",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_dout,
+	.store = mts_attr_store_dout,
+};
+
+static struct device_attribute dev_attr_gpio11 = {
+	.attr = {
+		.name = "gpio11",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_gpio11,
+	.store = mts_attr_store_gpio11,
+};
+
+static struct device_attribute dev_attr_gpio12 = {
+	.attr = {
+		.name = "gpio12",
+		.mode = MTS_ATTR_MODE_RW,
+	},
+	.show = mts_attr_show_gpio12,
+	.store = mts_attr_store_gpio12,
+};
+
+
+static struct attribute *mt100ecdp_platform_attributes[] = {
+	&dev_attr_radio_reset.attr,
+	&dev_attr_eth0_enabled.attr,
+	&dev_attr_gpio11.attr,
+	&dev_attr_gpio12.attr,
+
+	&dev_attr_gpo1.attr,
+	&dev_attr_gpo2.attr,
+	&dev_attr_gpo3.attr,
+	&dev_attr_gpo4.attr,
+	&dev_attr_led1.attr,
+	&dev_attr_led2.attr,
+	&dev_attr_led3.attr,
+	&dev_attr_led4.attr,
+	&dev_attr_led5.attr,
+	&dev_attr_led6.attr,
+
+	&dev_attr_gpi5.attr,
+	&dev_attr_gpi6.attr,
+	&dev_attr_gpi7.attr,
+	&dev_attr_gpi8.attr,
+	&dev_attr_gpi9.attr,
+	&dev_attr_gpi10.attr,
+
+	&dev_attr_board_temperature.attr,
+
+	&dev_attr_adc0.attr,
+	&dev_attr_adc1.attr,
+	&dev_attr_adc2.attr,
+	&dev_attr_adc3.attr,
+
+	NULL,
+};
+
+static struct attribute_group mt100ecdp_platform_attribute_group = {
+	.attrs = mt100ecdp_platform_attributes
+};
+
+
 static struct attribute *platform_attributes[] = {
 	&dev_attr_reset.attr,
 	&dev_attr_reset_monitor.attr,
@@ -1842,15 +2295,27 @@ static int __init mts_io_init(void)
 		goto error2;
 	}
 
-	ret = sysfs_create_group(&mts_io_platform_device->dev.kobj,
-					&platform_attribute_group);
-	if (ret) {
-		goto error3;
+	if (!strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		ret = sysfs_create_group(&mts_io_platform_device->dev.kobj,
+						&mt100ecdp_platform_attribute_group);
+		if (ret) {
+			goto error3;
+		}
+	}
+	else {
+		ret = sysfs_create_group(&mts_io_platform_device->dev.kobj,
+						&platform_attribute_group);
+		if (ret) {
+			goto error3;
+		}
 	}
 
-	ret = spi_register_driver(&mts_spi_sout_driver);
-	if (ret) {
-		goto error4;
+	// No sout driver for MT100ECDP
+	if (strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		ret = spi_register_driver(&mts_spi_sout_driver);
+		if (ret) {
+			goto error4;
+		}
 	}
 
 	ret = spi_register_driver(&mts_spi_board_temp_driver);
@@ -1903,7 +2368,10 @@ static int __init mts_io_init(void)
 		at91_set_gpio_value(pin->pin, 0);
 	}
 
-	blink_callback(NULL);
+	// No blinking for MT100ECDP
+	if (strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		blink_callback(NULL);
+	}
 
 	return 0;
 
@@ -1916,10 +2384,18 @@ error7:
 error6:
 	spi_unregister_driver(&mts_spi_dout_driver);
 error5:
-	spi_unregister_driver(&mts_spi_sout_driver);
+	if (strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		spi_unregister_driver(&mts_spi_sout_driver);
+	}
 error4:
-	sysfs_remove_group(&mts_io_platform_device->dev.kobj,
-				&platform_attribute_group);
+	if (!strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		sysfs_remove_group(&mts_io_platform_device->dev.kobj,
+					&mt100ecdp_platform_attribute_group);
+	}
+	else {
+		sysfs_remove_group(&mts_io_platform_device->dev.kobj,
+					&platform_attribute_group);
+	}
 error3:
 	platform_device_del(mts_io_platform_device);
 error2:
@@ -1932,7 +2408,9 @@ error1:
 
 static void __exit mts_io_exit(void)
 {
-	cancel_delayed_work_sync(&blink_work);
+	if (strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		cancel_delayed_work_sync(&blink_work);
+	}
 
 	iounmap(adc_base);
 	clk_disable(adc_clk);
@@ -1941,10 +2419,17 @@ static void __exit mts_io_exit(void)
 	spi_unregister_driver(&mts_spi_din_driver);
 	spi_unregister_driver(&mts_spi_dout_driver);
 	spi_unregister_driver(&mts_spi_board_temp_driver);
-	spi_unregister_driver(&mts_spi_sout_driver);
 
-	sysfs_remove_group(&mts_io_platform_device->dev.kobj,
-				&platform_attribute_group);
+	if (!strcmp(id_eeprom.product_id, PRODUCT_ID_MT100ECDP)) {
+		sysfs_remove_group(&mts_io_platform_device->dev.kobj,
+					&mt100ecdp_platform_attribute_group);
+	}
+	else {
+		spi_unregister_driver(&mts_spi_sout_driver);
+
+		sysfs_remove_group(&mts_io_platform_device->dev.kobj,
+					&platform_attribute_group);
+	}
 	platform_device_unregister(mts_io_platform_device);
 
 	log_info("exiting");
diff --git a/io-module/mts_io.h b/io-module/mts_io.h
index e9282cc..2ae88bc 100644
--- a/io-module/mts_io.h
+++ b/io-module/mts_io.h
@@ -12,10 +12,12 @@
 
 #define VENDOR_ID_MULTITECH			"Multi-Tech Systems"
 #define PRODUCT_ID_MTCDP_E1_DK			"MTCDP-E1-DK"
+#define PRODUCT_ID_MT100ECDP			"MT100ECDP"
 
 #define HW_VERSION_MTCBA2_2_0			"MTCBA2-2.0"
 #define HW_VERSION_MTCDP_0_0			"MTCDP-0.0"
 #define HW_VERSION_MTCDP_1_0			"MTCDP-1.0"
+#define HW_VERSION_MT100ECDP_0_0		"MT100ECDP-0.0"
 
 #define DEVICE_CAPA_INDEX(c)			(((c) & 0xFF) >> 3)
 #define DEVICE_CAPA_MASK(c)			BIT((c) & 0x07)