#@TYPE: Machine
#@Name: MTCAP
#@DESCRIPTION: Machine configuration for the MTCAP hardware

require conf/machine/include/tune-arm926ejs.inc

MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp"
PREFERRED_PROVIDER_virtual/kernel = "linux"
PREFERRED_VERSION_linux = "3.12.%"

MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "kernel-module-vizzini"
PREFERRED_VERSION_kernel-module-vizzini ?= "1.1"

DEFAULTTUNE = "arm926ejs"

# used by sysvinit_2
SERIAL_CONSOLES = "115200;ttyS0"
#don't try to access tty1
USE_VT = "0"

UBOOT_MACHINE = "at91sam9x5ek_nandflash_config"
PREFERRED_VERSION_u-boot = "2012.10"

AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot"
PREFERRED_VERSION_at91bootstrap = "3.5.3"

KERNEL_IMAGETYPE = "uImage"
# remove kernel-image from rootfs by overriding kernel-base DEPS
RDEPENDS_kernel-base = ""

EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"

IMAGE_FSTYPES =+ "jffs2 tar.gz"
EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n"

UBOOT_ENTRYPOINT = "0x20008000"
UBOOT_LOADADDRESS = "0x20008000"

PREFERRED_VERSION_lora-gateway = '4.0.1'
PREFERRED_VERSION_lora-packet-forwarder = '3.0.0'