From 47e0b4783ab81e2731333494963c85599507f8bd Mon Sep 17 00:00:00 2001
From: John Klug <john.klug@multitech.com>
Date: Mon, 11 Dec 2017 15:27:42 -0600
Subject: Rename the config script to prevent conflict with AEP

---
 .../get-eeprom-device-config.sh                    | 278 +++++++++++++++++++++
 .../multitech/get-eeprom-device-config_1.0.0.bb    |  23 ++
 .../get-eeprom-device-info.sh                      | 278 ---------------------
 .../multitech/get-eeprom-device-info_1.0.0.bb      |  23 --
 4 files changed, 301 insertions(+), 301 deletions(-)
 create mode 100755 recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh
 create mode 100644 recipes-bsp/multitech/get-eeprom-device-config_1.0.0.bb
 delete mode 100755 recipes-bsp/multitech/get-eeprom-device-info/get-eeprom-device-info.sh
 delete mode 100644 recipes-bsp/multitech/get-eeprom-device-info_1.0.0.bb

(limited to 'recipes-bsp')

diff --git a/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh b/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh
new file mode 100755
index 0000000..02754a6
--- /dev/null
+++ b/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh
@@ -0,0 +1,278 @@
+#!/bin/bash
+# Radio ID loop count
+TRY_COUNT=30
+
+CONFIG_PATH=/var/run/config
+
+#system capabilities
+CAPABILITY_ADC="false"
+CAPABILITY_BLUETOOTH="false"
+CAPABILITY_DIN="false"
+CAPABILITY_DOUT="false"
+#CAPABILITY_EXTERNAL_SERIAL_PORT="false"
+#CAPABILITY_FLEXIBLE_SERIAL_PORT="false"
+CAPABILITY_GPS="false"
+CAPABILITY_WIFI="false"
+CAPABILITY_CELL="false"
+CAPABILITY_LORA="false"
+CAPABILITY_GPIO="false"
+CAPABILITY_SERIAL="false"
+CAPABILITY_RS232="false"
+CAPABILITY_RS422="false"
+CAPABILITY_RS485="false"
+CAPABILITY_NODE_RED="false"
+CAPABILITY_LORA_NETWORK_SERVER="false"
+
+
+# accessory cards constans
+TEMP_AC_PATH="/var/volatile/tmp"
+TEMP_AC_JSON="$TEMP_AC_PATH/ac_data.json"
+# Number of accessory card places - size of array
+AC_CARD_COUNT=4
+
+function usage {
+	echo 'get-eeprom-device-info [-t TRY_COUNT]'
+        echo '  Where TRY_COUNT is the number of half'
+        echo '  second waits for the cellular radio'
+        echo '  to be ready for identification'
+        exit 1
+}
+
+# Reads accessory cards data
+# WARNING: Make sure function called after CAPABILITIY_* variables is set with initial values.
+ReadAcData() {
+  # Doing the same as mts-io-sysfs, but with one step, without unnesesary parsing.
+  MTS_IO_DIR="/sys/devices/platform/mts-io"
+  AC_PRFIX="ap"
+  TEMP_AC_FILE_PREFIX="/card"
+  TEMP_AC_PREFIX="$TEMP_AC_PATH$TEMP_AC_FILE_PREFIX"
+  # Fill property data for each accessory card
+  rm -f $TEMP_AC_PREFIX*
+  for f in `find $MTS_IO_DIR/$AC_PRFIX* -follow -maxdepth 1 -type f -follow -maxdepth 1 -type f 2>/dev/null`;
+  do
+    FILENAME=${f##*$MTS_IO_DIR/$AC_PRFIX}
+    case $FILENAME in
+      modalias )
+        ;;
+      power )
+        ;;
+      subsystem* )
+        ;;
+      uevent )
+        ;;
+      * )
+        AC_NUMBER=$(echo "$FILENAME" | cut -d "/" -f1)
+        AC_PROP=$(echo "$FILENAME" | cut -d "/" -f2)
+        # Do camel casing
+        # Because {sed -r '{s/-([a-z])/\U\1/g;}'} did not work for Not GNU sed 4.0 use awk + tr
+        # Removing next 2 lines gives about 50% function speed-up
+        AC_PROP=$( echo $AC_PROP | awk -F"-" '{for(j=1;j<=NF;j++){$j=toupper(substr($j,1,1))substr($j,2)}}1' | sed -r '{s/ //g;}' )
+        AC_PROP=`echo ${AC_PROP:0:1} | tr '[A-Z]' '[a-z]'`${AC_PROP:1}
+        #Output to temp file
+        AC_FILE="$TEMP_AC_PREFIX$AC_NUMBER"
+        printf "\"$AC_PROP\" : \"%s\",\n" `cat $f` >> $AC_FILE
+        ;;
+    esac
+  done
+  # Compose accessory cards data to array
+  echo "\"accessoryCards\" : [ " > $TEMP_AC_JSON
+  for ((I=1; I<=$AC_CARD_COUNT; ++I)) ;
+  do
+    AC_FILE="$TEMP_AC_PREFIX$I"
+    if [ -f "$AC_FILE" ];then
+      sed -i '$s/,$//' $AC_FILE # remove last comma
+      echo "{" >> $TEMP_AC_JSON
+      cat $AC_FILE >> $TEMP_AC_JSON
+      echo "}," >> $TEMP_AC_JSON
+
+      # Map product-id with capabilities.
+      if $(grep -q '"productId" : "MTAC-MFSER-DTE"' $AC_FILE) || $(grep -q '"productId" : "MTAC-MFSER-DCE"' $AC_FILE); then
+        CAPABILITY_SERIAL="true"
+        CAPABILITY_RS232="true"
+        CAPABILITY_RS422="true"
+        CAPABILITY_RS485="true"
+      elif $(grep -q '"productId" : "MTAC-GPIOB"' $AC_FILE) || $(grep -q '"productId" : "MTAC-GPIOI"' $AC_FILE); then
+        CAPABILITY_GPIO="true"
+        CAPABILITY_ADC="true"
+        CAPABILITY_DIN="true"
+        CAPABILITY_DOUT="true"
+      elif $(grep -q '"productId" : "MTAC-LORA-.*"' $AC_FILE); then
+        CAPABILITY_LORA="true"
+      fi
+    else
+      echo "null," >> $TEMP_AC_JSON
+    fi
+  done
+  sed -i '$s/,$//' $TEMP_AC_JSON # remove last comma
+  echo "]," >> $TEMP_AC_JSON
+}
+
+#check if LORA is present onboard a device.
+#Lora capability from an MTAC card is determined by ReadAcData()
+isNativeLoraPresent() {
+  LORA_ID_PREFIX="MTCAP-LORA-"
+  LORA_ID=$(mts-io-sysfs show lora/product-id 2> /dev/null)
+  if [[ $LORA_ID == $LORA_ID_PREFIX* ]]; then
+    return 0
+  else
+    return 1
+  fi
+}
+
+TEMP=$(getopt -o t: -n 'get-eeprom-device-info' -- "$@")
+eval set -- "$TEMP"
+# extract options and their arguments into variables.
+while true ; do
+    case "$1" in
+        -t)
+            case "$2" in
+                "") usage ;;
+                *) TRY_COUNT=$2 ; shift 2 ;;
+            esac ;;
+        --) shift ; break ;;
+        *) echo "usage" ;;
+    esac
+done
+
+# Read device information from eeprom device
+
+mts-id-eeprom --in-file /sys/bus/i2c/devices/i2c-0/0-0056/eeprom > ${CONFIG_PATH}/device_info
+
+DEVICE_CAPA=${CONFIG_PATH}/device_capa
+DEVICE_INFO_JSON=${CONFIG_PATH}/device_info.json
+
+# Create json data files
+echo "{" > $DEVICE_CAPA
+echo "{" > ${CONFIG_PATH}/device_info.json
+
+
+# Read each line and parse the device data
+while read line
+do
+
+if [[ $line =~ ^vendor-id:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/vendor_id
+    echo \"vendorId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^product-id:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_type
+    echo \"productId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^device-id:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_id
+    echo \"deviceId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^hw-version:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/hw_version
+    echo \"hardwareVersion\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^mac-addr:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_addr
+    echo \"macAddress\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^mac-bluetooth:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_bluetooth
+    echo \"macBluetooth\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^mac-wifi:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_wifi
+    echo \"macWifi\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^uuid:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/uuid
+    echo \"uuid\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ ^imei:\ \"(.*)\" ]]; then
+    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/modem_imei
+    echo \"imei\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ capa-gps:\ (.*) ]]; then
+    CAPABILITY_GPS=$(echo ${BASH_REMATCH[1]})
+elif [[ $line =~ capa-din:\ (.*) ]]; then
+    CAPABILITY_DIN=$(echo ${BASH_REMATCH[1]})
+elif [[ $line =~ capa-dout:\ (.*) ]]; then
+    CAPABILITY_DOUT=$(echo ${BASH_REMATCH[1]})
+elif [[ $line =~ capa-adc:\ (.*) ]]; then
+    CAPABILITY_ADC=$(echo ${BASH_REMATCH[1]})
+elif [[ $line =~ capa-wifi:\ (.*) ]]; then
+    CAPABILITY_WIFI=$(echo ${BASH_REMATCH[1]})
+elif [[ $line =~ capa-bluetooth:\ (.*) ]]; then
+    CAPABILITY_BLUETOOTH=$(echo ${BASH_REMATCH[1]})
+elif [[ $line =~ capa:\ \"(.*)\" ]]; then
+    echo \"mask\": \"${BASH_REMATCH[1]}\", >> $DEVICE_CAPA
+fi
+
+done <${CONFIG_PATH}/device_info
+
+echo "Finding cellular module..."
+for ((i=0; i < TRY_COUNT; i++))
+  do
+    # Check cellular module
+    echo "Try #"$i
+    if [[ -L "/dev/modem_at0" && -L "/dev/modem_at1" ]]; then
+      CAPABILITY_CELL="true"
+      break
+    fi
+    if ((TRY_COUNT > 1)) ; then
+      sleep 0.5
+    fi
+  done
+
+if isNativeLoraPresent; then
+  CAPABILITY_LORA="true"
+fi
+
+#
+# Check if NODE-RED and Lora Network Server packages are installed
+#
+OPKG_FILE=/tmp/opkg_inst.tmp
+opkg list-installed > $OPKG_FILE
+
+cat $OPKG_FILE | grep node-red > /dev/null
+[ $? -eq 0 ] && CAPABILITY_NODE_RED="true"
+
+cat $OPKG_FILE | grep lora-network-server > /dev/null
+[ $? -eq 0 ] && CAPABILITY_LORA_NETWORK_SERVER="true"
+
+rm -f $OPKG_FILE
+
+
+# Read firmware info from /etc/issue
+cat /etc/issue |
+(
+while read line
+do
+
+if [[ $line =~ Version:\ (.*) ]]; then
+    echo \"firmware\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+elif [[ $line =~ Date:\ (.*) ]]; then
+    echo \"firmwareDate\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
+fi
+
+done
+)
+# Add accessory cards
+echo "Reading accessory cards data"
+ReadAcData
+echo "Adding accessory cards data"
+cat $TEMP_AC_JSON >> $DEVICE_INFO_JSON
+
+# Complete the json files
+echo \"adc\": $CAPABILITY_ADC, >> $DEVICE_CAPA
+echo \"bluetooth\": $CAPABILITY_BLUETOOTH, >> $DEVICE_CAPA
+echo \"din\": $CAPABILITY_DIN, >> $DEVICE_CAPA
+echo \"dout\": $CAPABILITY_DOUT, >> $DEVICE_CAPA
+echo \"gps\": $CAPABILITY_GPS, >> $DEVICE_CAPA
+echo \"wifi\": $CAPABILITY_WIFI, >> $DEVICE_CAPA
+echo \"cell\": $CAPABILITY_CELL, >> $DEVICE_CAPA
+echo \"lora\": $CAPABILITY_LORA, >> $DEVICE_CAPA
+echo \"gpio\": $CAPABILITY_GPIO, >> $DEVICE_CAPA
+echo \"serial\": $CAPABILITY_SERIAL, >> $DEVICE_CAPA
+echo \"rs232\": $CAPABILITY_RS232, >> $DEVICE_CAPA
+echo \"rs422\": $CAPABILITY_RS422, >> $DEVICE_CAPA
+echo \"rs485\": $CAPABILITY_RS485, >> $DEVICE_CAPA
+echo \"nodeRed\": $CAPABILITY_NODE_RED, >> $DEVICE_CAPA
+echo \"loraNetworkServer\": $CAPABILITY_LORA_NETWORK_SERVER >> $DEVICE_CAPA
+echo "}" >> $DEVICE_CAPA
+echo \"capabilities\": >> $DEVICE_INFO_JSON
+cat $DEVICE_CAPA >> $DEVICE_INFO_JSON
+echo "}" >> $DEVICE_INFO_JSON
+
+# Clean up temp files
+rm $DEVICE_CAPA
+rm ${CONFIG_PATH}/device_info
+
+#echo device_info.json ----------
+#cat /var/run/config/device_info.json
+#echo ---------------------------
diff --git a/recipes-bsp/multitech/get-eeprom-device-config_1.0.0.bb b/recipes-bsp/multitech/get-eeprom-device-config_1.0.0.bb
new file mode 100644
index 0000000..821f560
--- /dev/null
+++ b/recipes-bsp/multitech/get-eeprom-device-config_1.0.0.bb
@@ -0,0 +1,23 @@
+# Script to copy the EEPROM to /run/config
+PR = "r1"
+DESCRIPTION = "EEPROM copyting tool"
+HOMEPAGE = "http://www.multitech.net/"
+SECTION = "console/utils"
+PRIORITY = "optional"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.GPLv2;md5=751419260aa954499f7abaabaa882bbe"
+RDEPENDS_${PN} =+ "bash"
+
+SRCREV = "${PV}"
+
+SRC_URI = "file://${PN}.sh"
+
+PARALLEL_MAKE = ""
+
+
+fakeroot do_install_append() {
+    # install MTCAP mts-io init script
+    install -d 0755 ${D}${base_sbindir}
+    install -m 0755 ${WORKDIR}/${PN}.sh  ${D}${base_sbindir}/${PN}
+}
+
diff --git a/recipes-bsp/multitech/get-eeprom-device-info/get-eeprom-device-info.sh b/recipes-bsp/multitech/get-eeprom-device-info/get-eeprom-device-info.sh
deleted file mode 100755
index 02754a6..0000000
--- a/recipes-bsp/multitech/get-eeprom-device-info/get-eeprom-device-info.sh
+++ /dev/null
@@ -1,278 +0,0 @@
-#!/bin/bash
-# Radio ID loop count
-TRY_COUNT=30
-
-CONFIG_PATH=/var/run/config
-
-#system capabilities
-CAPABILITY_ADC="false"
-CAPABILITY_BLUETOOTH="false"
-CAPABILITY_DIN="false"
-CAPABILITY_DOUT="false"
-#CAPABILITY_EXTERNAL_SERIAL_PORT="false"
-#CAPABILITY_FLEXIBLE_SERIAL_PORT="false"
-CAPABILITY_GPS="false"
-CAPABILITY_WIFI="false"
-CAPABILITY_CELL="false"
-CAPABILITY_LORA="false"
-CAPABILITY_GPIO="false"
-CAPABILITY_SERIAL="false"
-CAPABILITY_RS232="false"
-CAPABILITY_RS422="false"
-CAPABILITY_RS485="false"
-CAPABILITY_NODE_RED="false"
-CAPABILITY_LORA_NETWORK_SERVER="false"
-
-
-# accessory cards constans
-TEMP_AC_PATH="/var/volatile/tmp"
-TEMP_AC_JSON="$TEMP_AC_PATH/ac_data.json"
-# Number of accessory card places - size of array
-AC_CARD_COUNT=4
-
-function usage {
-	echo 'get-eeprom-device-info [-t TRY_COUNT]'
-        echo '  Where TRY_COUNT is the number of half'
-        echo '  second waits for the cellular radio'
-        echo '  to be ready for identification'
-        exit 1
-}
-
-# Reads accessory cards data
-# WARNING: Make sure function called after CAPABILITIY_* variables is set with initial values.
-ReadAcData() {
-  # Doing the same as mts-io-sysfs, but with one step, without unnesesary parsing.
-  MTS_IO_DIR="/sys/devices/platform/mts-io"
-  AC_PRFIX="ap"
-  TEMP_AC_FILE_PREFIX="/card"
-  TEMP_AC_PREFIX="$TEMP_AC_PATH$TEMP_AC_FILE_PREFIX"
-  # Fill property data for each accessory card
-  rm -f $TEMP_AC_PREFIX*
-  for f in `find $MTS_IO_DIR/$AC_PRFIX* -follow -maxdepth 1 -type f -follow -maxdepth 1 -type f 2>/dev/null`;
-  do
-    FILENAME=${f##*$MTS_IO_DIR/$AC_PRFIX}
-    case $FILENAME in
-      modalias )
-        ;;
-      power )
-        ;;
-      subsystem* )
-        ;;
-      uevent )
-        ;;
-      * )
-        AC_NUMBER=$(echo "$FILENAME" | cut -d "/" -f1)
-        AC_PROP=$(echo "$FILENAME" | cut -d "/" -f2)
-        # Do camel casing
-        # Because {sed -r '{s/-([a-z])/\U\1/g;}'} did not work for Not GNU sed 4.0 use awk + tr
-        # Removing next 2 lines gives about 50% function speed-up
-        AC_PROP=$( echo $AC_PROP | awk -F"-" '{for(j=1;j<=NF;j++){$j=toupper(substr($j,1,1))substr($j,2)}}1' | sed -r '{s/ //g;}' )
-        AC_PROP=`echo ${AC_PROP:0:1} | tr '[A-Z]' '[a-z]'`${AC_PROP:1}
-        #Output to temp file
-        AC_FILE="$TEMP_AC_PREFIX$AC_NUMBER"
-        printf "\"$AC_PROP\" : \"%s\",\n" `cat $f` >> $AC_FILE
-        ;;
-    esac
-  done
-  # Compose accessory cards data to array
-  echo "\"accessoryCards\" : [ " > $TEMP_AC_JSON
-  for ((I=1; I<=$AC_CARD_COUNT; ++I)) ;
-  do
-    AC_FILE="$TEMP_AC_PREFIX$I"
-    if [ -f "$AC_FILE" ];then
-      sed -i '$s/,$//' $AC_FILE # remove last comma
-      echo "{" >> $TEMP_AC_JSON
-      cat $AC_FILE >> $TEMP_AC_JSON
-      echo "}," >> $TEMP_AC_JSON
-
-      # Map product-id with capabilities.
-      if $(grep -q '"productId" : "MTAC-MFSER-DTE"' $AC_FILE) || $(grep -q '"productId" : "MTAC-MFSER-DCE"' $AC_FILE); then
-        CAPABILITY_SERIAL="true"
-        CAPABILITY_RS232="true"
-        CAPABILITY_RS422="true"
-        CAPABILITY_RS485="true"
-      elif $(grep -q '"productId" : "MTAC-GPIOB"' $AC_FILE) || $(grep -q '"productId" : "MTAC-GPIOI"' $AC_FILE); then
-        CAPABILITY_GPIO="true"
-        CAPABILITY_ADC="true"
-        CAPABILITY_DIN="true"
-        CAPABILITY_DOUT="true"
-      elif $(grep -q '"productId" : "MTAC-LORA-.*"' $AC_FILE); then
-        CAPABILITY_LORA="true"
-      fi
-    else
-      echo "null," >> $TEMP_AC_JSON
-    fi
-  done
-  sed -i '$s/,$//' $TEMP_AC_JSON # remove last comma
-  echo "]," >> $TEMP_AC_JSON
-}
-
-#check if LORA is present onboard a device.
-#Lora capability from an MTAC card is determined by ReadAcData()
-isNativeLoraPresent() {
-  LORA_ID_PREFIX="MTCAP-LORA-"
-  LORA_ID=$(mts-io-sysfs show lora/product-id 2> /dev/null)
-  if [[ $LORA_ID == $LORA_ID_PREFIX* ]]; then
-    return 0
-  else
-    return 1
-  fi
-}
-
-TEMP=$(getopt -o t: -n 'get-eeprom-device-info' -- "$@")
-eval set -- "$TEMP"
-# extract options and their arguments into variables.
-while true ; do
-    case "$1" in
-        -t)
-            case "$2" in
-                "") usage ;;
-                *) TRY_COUNT=$2 ; shift 2 ;;
-            esac ;;
-        --) shift ; break ;;
-        *) echo "usage" ;;
-    esac
-done
-
-# Read device information from eeprom device
-
-mts-id-eeprom --in-file /sys/bus/i2c/devices/i2c-0/0-0056/eeprom > ${CONFIG_PATH}/device_info
-
-DEVICE_CAPA=${CONFIG_PATH}/device_capa
-DEVICE_INFO_JSON=${CONFIG_PATH}/device_info.json
-
-# Create json data files
-echo "{" > $DEVICE_CAPA
-echo "{" > ${CONFIG_PATH}/device_info.json
-
-
-# Read each line and parse the device data
-while read line
-do
-
-if [[ $line =~ ^vendor-id:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/vendor_id
-    echo \"vendorId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^product-id:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_type
-    echo \"productId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^device-id:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_id
-    echo \"deviceId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^hw-version:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/hw_version
-    echo \"hardwareVersion\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^mac-addr:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_addr
-    echo \"macAddress\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^mac-bluetooth:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_bluetooth
-    echo \"macBluetooth\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^mac-wifi:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_wifi
-    echo \"macWifi\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^uuid:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/uuid
-    echo \"uuid\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ ^imei:\ \"(.*)\" ]]; then
-    echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/modem_imei
-    echo \"imei\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ capa-gps:\ (.*) ]]; then
-    CAPABILITY_GPS=$(echo ${BASH_REMATCH[1]})
-elif [[ $line =~ capa-din:\ (.*) ]]; then
-    CAPABILITY_DIN=$(echo ${BASH_REMATCH[1]})
-elif [[ $line =~ capa-dout:\ (.*) ]]; then
-    CAPABILITY_DOUT=$(echo ${BASH_REMATCH[1]})
-elif [[ $line =~ capa-adc:\ (.*) ]]; then
-    CAPABILITY_ADC=$(echo ${BASH_REMATCH[1]})
-elif [[ $line =~ capa-wifi:\ (.*) ]]; then
-    CAPABILITY_WIFI=$(echo ${BASH_REMATCH[1]})
-elif [[ $line =~ capa-bluetooth:\ (.*) ]]; then
-    CAPABILITY_BLUETOOTH=$(echo ${BASH_REMATCH[1]})
-elif [[ $line =~ capa:\ \"(.*)\" ]]; then
-    echo \"mask\": \"${BASH_REMATCH[1]}\", >> $DEVICE_CAPA
-fi
-
-done <${CONFIG_PATH}/device_info
-
-echo "Finding cellular module..."
-for ((i=0; i < TRY_COUNT; i++))
-  do
-    # Check cellular module
-    echo "Try #"$i
-    if [[ -L "/dev/modem_at0" && -L "/dev/modem_at1" ]]; then
-      CAPABILITY_CELL="true"
-      break
-    fi
-    if ((TRY_COUNT > 1)) ; then
-      sleep 0.5
-    fi
-  done
-
-if isNativeLoraPresent; then
-  CAPABILITY_LORA="true"
-fi
-
-#
-# Check if NODE-RED and Lora Network Server packages are installed
-#
-OPKG_FILE=/tmp/opkg_inst.tmp
-opkg list-installed > $OPKG_FILE
-
-cat $OPKG_FILE | grep node-red > /dev/null
-[ $? -eq 0 ] && CAPABILITY_NODE_RED="true"
-
-cat $OPKG_FILE | grep lora-network-server > /dev/null
-[ $? -eq 0 ] && CAPABILITY_LORA_NETWORK_SERVER="true"
-
-rm -f $OPKG_FILE
-
-
-# Read firmware info from /etc/issue
-cat /etc/issue |
-(
-while read line
-do
-
-if [[ $line =~ Version:\ (.*) ]]; then
-    echo \"firmware\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-elif [[ $line =~ Date:\ (.*) ]]; then
-    echo \"firmwareDate\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON
-fi
-
-done
-)
-# Add accessory cards
-echo "Reading accessory cards data"
-ReadAcData
-echo "Adding accessory cards data"
-cat $TEMP_AC_JSON >> $DEVICE_INFO_JSON
-
-# Complete the json files
-echo \"adc\": $CAPABILITY_ADC, >> $DEVICE_CAPA
-echo \"bluetooth\": $CAPABILITY_BLUETOOTH, >> $DEVICE_CAPA
-echo \"din\": $CAPABILITY_DIN, >> $DEVICE_CAPA
-echo \"dout\": $CAPABILITY_DOUT, >> $DEVICE_CAPA
-echo \"gps\": $CAPABILITY_GPS, >> $DEVICE_CAPA
-echo \"wifi\": $CAPABILITY_WIFI, >> $DEVICE_CAPA
-echo \"cell\": $CAPABILITY_CELL, >> $DEVICE_CAPA
-echo \"lora\": $CAPABILITY_LORA, >> $DEVICE_CAPA
-echo \"gpio\": $CAPABILITY_GPIO, >> $DEVICE_CAPA
-echo \"serial\": $CAPABILITY_SERIAL, >> $DEVICE_CAPA
-echo \"rs232\": $CAPABILITY_RS232, >> $DEVICE_CAPA
-echo \"rs422\": $CAPABILITY_RS422, >> $DEVICE_CAPA
-echo \"rs485\": $CAPABILITY_RS485, >> $DEVICE_CAPA
-echo \"nodeRed\": $CAPABILITY_NODE_RED, >> $DEVICE_CAPA
-echo \"loraNetworkServer\": $CAPABILITY_LORA_NETWORK_SERVER >> $DEVICE_CAPA
-echo "}" >> $DEVICE_CAPA
-echo \"capabilities\": >> $DEVICE_INFO_JSON
-cat $DEVICE_CAPA >> $DEVICE_INFO_JSON
-echo "}" >> $DEVICE_INFO_JSON
-
-# Clean up temp files
-rm $DEVICE_CAPA
-rm ${CONFIG_PATH}/device_info
-
-#echo device_info.json ----------
-#cat /var/run/config/device_info.json
-#echo ---------------------------
diff --git a/recipes-bsp/multitech/get-eeprom-device-info_1.0.0.bb b/recipes-bsp/multitech/get-eeprom-device-info_1.0.0.bb
deleted file mode 100644
index 821f560..0000000
--- a/recipes-bsp/multitech/get-eeprom-device-info_1.0.0.bb
+++ /dev/null
@@ -1,23 +0,0 @@
-# Script to copy the EEPROM to /run/config
-PR = "r1"
-DESCRIPTION = "EEPROM copyting tool"
-HOMEPAGE = "http://www.multitech.net/"
-SECTION = "console/utils"
-PRIORITY = "optional"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.GPLv2;md5=751419260aa954499f7abaabaa882bbe"
-RDEPENDS_${PN} =+ "bash"
-
-SRCREV = "${PV}"
-
-SRC_URI = "file://${PN}.sh"
-
-PARALLEL_MAKE = ""
-
-
-fakeroot do_install_append() {
-    # install MTCAP mts-io init script
-    install -d 0755 ${D}${base_sbindir}
-    install -m 0755 ${WORKDIR}/${PN}.sh  ${D}${base_sbindir}/${PN}
-}
-
-- 
cgit v1.2.3