From 271cc2e048cc0920e7db71ce175f3f2394872128 Mon Sep 17 00:00:00 2001 From: John Klug Date: Wed, 10 Apr 2019 14:16:25 -0500 Subject: Remove unused file from patch --- .../at91bootstrap-3.5.3-mtcdt.patch | 383 --------------------- 1 file changed, 383 deletions(-) diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch index 26de833..0a1742c 100644 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch @@ -126,386 +126,3 @@ Index: git/board/at91sam9x5ek/at91sam9x5ek.c pio_configure(nand_pins_hi); writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC)); -diff -aNru git.orig/board/at91sam9x5ek/at91sam9x5ek.c.orig git/board/at91sam9x5ek/at91sam9x5ek.c.orig ---- git.orig/board/at91sam9x5ek/at91sam9x5ek.c.orig 1969-12-31 18:00:00.000000000 -0600 -+++ git/board/at91sam9x5ek/at91sam9x5ek.c.orig 2019-04-04 17:06:31.091222136 -0500 -@@ -0,0 +1,379 @@ -+/* ---------------------------------------------------------------------------- -+ * ATMEL Microcontroller Software Support -+ * ---------------------------------------------------------------------------- -+ * Copyright (c) 2008, Atmel Corporation -+ -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * -+ * - Redistributions of source code must retain the above copyright notice, -+ * this list of conditions and the disclaimer below. -+ * -+ * Atmel's name may not be used to endorse or promote products derived from -+ * this software without specific prior written permission. -+ * -+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR -+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE -+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, -+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+#include "common.h" -+#include "hardware.h" -+#include "arch/at91_ccfg.h" -+#include "arch/at91_rstc.h" -+#include "arch/at91_pmc.h" -+#include "arch/at91_smc.h" -+#include "arch/at91_pio.h" -+#include "arch/at91_ddrsdrc.h" -+#include "gpio.h" -+#include "pmc.h" -+#include "dbgu.h" -+#include "debug.h" -+#include "ddramc.h" -+#include "slowclk.h" -+#include "timer.h" -+#include "watchdog.h" -+#include "string.h" -+#include "at91sam9x5ek.h" -+ -+#include "onewire_info.h" -+ -+#define RTC_SCCR 0x1C -+#define RTC_IDR 0x24 -+ -+#ifdef CONFIG_USER_HW_INIT -+extern void hw_init_hook(void); -+#endif -+ -+static void at91_dbgu_hw_init(void) -+{ -+ /* Configure DBGU pins */ -+ const struct pio_desc dbgu_pins[] = { -+ {"RXD", AT91C_PIN_PA(9), 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ {"TXD", AT91C_PIN_PA(10), 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ pio_configure(dbgu_pins); -+ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); -+} -+ -+static void initialize_dbgu(void) -+{ -+ at91_dbgu_hw_init(); -+ dbgu_init(BAUDRATE(MASTER_CLOCK, BAUD_RATE)); -+} -+ -+#ifdef CONFIG_DDR2 -+/* Using the Micron MT47H64M16HR-3 */ -+static void ddramc_reg_config(struct ddramc_register *ddramc_config) -+{ -+ ddramc_config->mdr = (AT91C_DDRC2_DBW_16_BITS -+ | AT91C_DDRC2_MD_DDR2_SDRAM); -+ -+ ddramc_config->cr = (AT91C_DDRC2_NC_DDR10_SDR9 /* 10 column bits(1K) */ -+ | AT91C_DDRC2_NR_13 /* 13 row bits (8K) */ -+ | AT91C_DDRC2_CAS_3 /* CAS Latency 3 */ -+ | AT91C_DDRC2_NB_BANKS_8 /* 8 banks */ -+ | AT91C_DDRC2_DLL_RESET_DISABLED /* DLL not reset */ -+ | AT91C_DDRC2_DIC_DS /* Low DDR Drive Strength */ -+ | AT91C_DDRC2_DECOD_INTERLEAVED);/* Interleaved decode*/ -+ -+ /* -+ * Make sure to uncomment the following line if the DDR controller -+ * shares the EBI with another memory controller (SMC, NAND,..). -+ * For instance, AT91C_DDRC2_EBISHARE shall be set if NAND flash -+ * data line 0 is positioned on EBI data line 0 (AT91C_EBI_NFD0_ON_D16 bit -+ * cleared in CCFG_EBICSA register). -+ * -+ * For Atmel AT91SAM9x5-EK revision B onwards, this AT91C_DDRC2_EBISHARE bit -+ * is cleared because the NAND flash data line 0 is positioned on EBI -+ * data line number 16 (AT91C_EBI_NFD0_ON_D16 bit set in CCFG_EBICSA -+ * register). Only the DDR controller function is thus used on lower -+ * EBI data lines. -+ */ -+ //ddramc_config->cr |= AT91C_DDRC2_EBISHARE; /* DQM is shared with other controller */ -+ -+ -+ /* -+ * The DDR2-SDRAM device requires a refresh every 15.625 us or 7.81 us. -+ * With a 133 MHz frequency, the refresh timer count register must to be -+ * set with (15.625 x 133 MHz) ~ 2084 i.e. 0x824 -+ * or (7.81 x 133 MHz) ~ 1040 i.e. 0x410. -+ */ -+ ddramc_config->rtr = 0x411; /* Refresh timer: 7.8125us */ -+ -+ /* One clock cycle @ 133 MHz = 7.5 ns */ -+ ddramc_config->t0pr = (AT91C_DDRC2_TRAS_6 /* 6 * 7.5 = 45 ns */ -+ | AT91C_DDRC2_TRCD_2 /* 2 * 7.5 = 22.5 ns */ -+ | AT91C_DDRC2_TWR_2 /* 2 * 7.5 = 15 ns */ -+ | AT91C_DDRC2_TRC_8 /* 8 * 7.5 = 75 ns */ -+ | AT91C_DDRC2_TRP_2 /* 2 * 7.5 = 15 ns */ -+ | AT91C_DDRC2_TRRD_2 /* 2 * 7.5 = 15 ns */ -+ | AT91C_DDRC2_TWTR_2 /* 2 clock cycles min */ -+ | AT91C_DDRC2_TMRD_2); /* 2 clock cycles */ -+ -+ ddramc_config->t1pr = (AT91C_DDRC2_TXP_2 /* 2 clock cycles */ -+ | AT91C_DDRC2_TXSRD_200 /* 200 clock cycles */ -+ | AT91C_DDRC2_TXSNR_19 /* 19 * 7.5 = 142.5 ns*/ -+ | AT91C_DDRC2_TRFC_18); /* 18 * 7.5 = 135 ns */ -+ -+ ddramc_config->t2pr = (AT91C_DDRC2_TFAW_7 /* 7 * 7.5 = 52.5 ns */ -+ | AT91C_DDRC2_TRTP_2 /* 2 clock cycles min */ -+ | AT91C_DDRC2_TRPA_3 /* 3 * 7.5 = 22.5 ns */ -+ | AT91C_DDRC2_TXARDS_7 /* 7 clock cycles */ -+ | AT91C_DDRC2_TXARD_2); /* 2 clock cycles */ -+} -+ -+static void ddramc_init(void) -+{ -+ unsigned long csa; -+ struct ddramc_register ddramc_reg; -+ -+ ddramc_reg_config(&ddramc_reg); -+ -+ /* ENABLE DDR2 clock */ -+ writel(AT91C_PMC_DDR, AT91C_BASE_PMC + PMC_SCER); -+ -+ /* Chip select 1 is for DDR2/SDRAM */ -+ csa = readl(AT91C_BASE_CCFG + CCFG_EBICSA); -+ csa |= AT91C_EBI_CS1A_SDRAMC; -+ csa &= ~AT91C_EBI_DBPUC; -+ csa |= AT91C_EBI_DBPDC; -+ csa |= AT91C_EBI_DRV_HD; -+ -+ writel(csa, AT91C_BASE_CCFG + CCFG_EBICSA); -+ -+ /* DDRAM2 Controller initialize */ -+ ddram_initialize(AT91C_BASE_DDRSDRC, AT91C_BASE_CS1, &ddramc_reg); -+} -+#endif /* #ifdef CONFIG_DDR2 */ -+ -+static void one_wire_hw_init(void) -+{ -+ const struct pio_desc wire_pio[] = { -+ {"1-Wire", AT91C_PIN_PB(18), 1, PIO_DEFAULT, PIO_OUTPUT}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); -+ pio_configure(wire_pio); -+} -+ -+#ifdef CONFIG_HW_INIT -+void hw_init(void) -+{ -+ /* Disable watchdog */ -+ at91_disable_wdt(); -+ -+ /* At this stage the main oscillator is -+ *supposed to be enabled PCK = MCK = MOSC -+ */ -+ writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR); -+ -+ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ -+ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT); -+ -+ /* PCK = PLLA/2 = 3 * MCK */ -+ pmc_cfg_mck(BOARD_PRESCALER_MAIN_CLOCK, PLL_LOCK_TIMEOUT); -+ -+ /* Switch MCK on PLLA output */ -+ pmc_cfg_mck(BOARD_PRESCALER_PLLA, PLL_LOCK_TIMEOUT); -+ -+ /*Enable External Reset */ -+ writel(AT91C_RSTC_KEY_UNLOCK | AT91C_RSTC_URSTEN, AT91C_BASE_RSTC + RSTC_RMR); -+ -+ /* Init timer */ -+ timer_init(); -+ -+#ifdef CONFIG_SCLK -+ slowclk_enable_osc32(); -+#endif -+ -+ /* Initialize dbgu */ -+ initialize_dbgu(); -+ -+#ifdef CONFIG_DDR2 -+ /* Initialize DDRAM Controller */ -+ ddramc_init(); -+#endif -+ /* one wire pin init */ -+ one_wire_hw_init(); -+ -+#ifdef CONFIG_USER_HW_INIT -+ hw_init_hook(); -+#endif -+ -+ /* disable all RTC interrupts and clear status register. -+ * Prevents possible Linux lockup due to unexpected RTC interrupt -+ */ -+ writel(0xFF, RTC_IDR + AT91C_BASE_RTC); -+ writel(0xFF, RTC_SCCR + AT91C_BASE_RTC); -+} -+#endif /* #ifdef CONFIG_HW_INIT */ -+ -+#ifdef CONFIG_DATAFLASH -+void at91_spi0_hw_init(void) -+{ -+ /* Configure PINs for SPI0 */ -+ const struct pio_desc spi0_pins[] = { -+ {"MISO", AT91C_PIN_PA(11), 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ {"MOSI", AT91C_PIN_PA(12), 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ {"SPCK", AT91C_PIN_PA(13), 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ {"NPCS", CONFIG_SYS_SPI_PCS, 1, PIO_DEFAULT, PIO_OUTPUT}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); -+ pio_configure(spi0_pins); -+ -+ writel((1 << AT91C_ID_SPI0), (PMC_PCER + AT91C_BASE_PMC)); -+} -+#endif /* #ifdef CONFIG_DATAFLASH */ -+ -+#ifdef CONFIG_SDCARD -+static void sdcard_set_of_name_board(char *of_name) -+{ -+ unsigned int cpu_board_id = get_cm_sn(); -+ unsigned int disp_board_id = get_dm_sn(); -+ -+ if (cpu_board_id == BOARD_ID_SAM9G15_CM) -+ strcpy(of_name, "at91sam9g15ek"); -+ else if (cpu_board_id == BOARD_ID_SAM9G25_CM) -+ strcpy(of_name, "at91sam9g25ek"); -+ else if (cpu_board_id == BOARD_ID_SAM9G35_CM) -+ strcpy(of_name, "at91sam9g35ek"); -+ else if (cpu_board_id == BOARD_ID_SAM9X25_CM) -+ strcpy(of_name, "at91sam9x25ek"); -+ else if (cpu_board_id == BOARD_ID_SAM9X35_CM) -+ strcpy(of_name, "at91sam9x35ek"); -+ else -+ dbg_log(1, "WARNING: Not correct CPU board ID\n\r"); -+ -+ if (disp_board_id == BOARD_ID_PDA_DM) -+ strcat(of_name, "_pda"); -+ -+ strcat(of_name, ".dtb"); -+} -+ -+void at91_mci0_hw_init(void) -+{ -+ const struct pio_desc mci_pins[] = { -+ {"MCCK", AT91C_PIN_PA(17), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"MCCDA", AT91C_PIN_PA(16), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"MCDA0", AT91C_PIN_PA(15), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"MCDA1", AT91C_PIN_PA(18), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"MCDA2", AT91C_PIN_PA(19), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"MCDA3", AT91C_PIN_PA(20), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ /* Configure the PIO controller */ -+ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); -+ pio_configure(mci_pins); -+ -+ /* Enable the clock */ -+ writel((1 << AT91C_ID_HSMCI0), (PMC_PCER + AT91C_BASE_PMC)); -+ -+ /* Set of name function pointer */ -+ sdcard_set_of_name = &sdcard_set_of_name_board; -+} -+#endif /* #ifdef CONFIG_SDCARD */ -+ -+#ifdef CONFIG_NANDFLASH -+void nandflash_hw_init(void) -+{ -+ unsigned int reg; -+ -+ /* Configure Nand PINs */ -+ const struct pio_desc nand_pins_hi[] = { -+ {"NANDOE", CONFIG_SYS_NAND_OE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDWE", CONFIG_SYS_NAND_WE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDALE", CONFIG_SYS_NAND_ALE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDCLE", CONFIG_SYS_NAND_CLE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDCS", CONFIG_SYS_NAND_ENABLE_PIN, 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"D0", AT91C_PIN_PD(6), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"D1", AT91C_PIN_PD(7), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"D2", AT91C_PIN_PD(8), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"D3", AT91C_PIN_PD(9), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"D4", AT91C_PIN_PD(10), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"D5", AT91C_PIN_PD(11), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"D6", AT91C_PIN_PD(12), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"D7", AT91C_PIN_PD(13), 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ const struct pio_desc nand_pins_lo[] = { -+ {"NANDOE", CONFIG_SYS_NAND_OE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDWE", CONFIG_SYS_NAND_WE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDALE", CONFIG_SYS_NAND_ALE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDCLE", CONFIG_SYS_NAND_CLE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, -+ {"NANDCS", CONFIG_SYS_NAND_ENABLE_PIN, 1, PIO_PULLUP, PIO_OUTPUT}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); -+ reg |= AT91C_EBI_CS3A_SM; -+ if (get_cm_rev() == 'A') -+ reg &= ~AT91C_EBI_NFD0_ON_D16; -+ else -+ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); -+ -+ reg &= ~AT91C_EBI_DRV; -+ writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); -+ -+ /* Configure SMC CS3 */ -+ writel((AT91C_SMC_NWESETUP_(1) -+ | AT91C_SMC_NCS_WRSETUP_(0) -+ | AT91C_SMC_NRDSETUP_(2) -+ | AT91C_SMC_NCS_RDSETUP_(0)), -+ AT91C_BASE_SMC + SMC_SETUP3); -+ -+ writel((AT91C_SMC_NWEPULSE_(3) -+ | AT91C_SMC_NCS_WRPULSE_(5) -+ | AT91C_SMC_NRDPULSE_(4) -+ | AT91C_SMC_NCS_RDPULSE_(6)), -+ AT91C_BASE_SMC + SMC_PULSE3); -+ -+ writel((AT91C_SMC_NWECYCLE_(5) -+ | AT91C_SMC_NRDCYCLE_(7)), -+ AT91C_BASE_SMC + SMC_CYCLE3); -+ -+ writel((AT91C_SMC_READMODE -+ | AT91C_SMC_WRITEMODE -+ | AT91C_SMC_NWAITM_NWAIT_DISABLE -+ | AT91C_SMC_DBW_WIDTH_BITS_8 -+ | AT91_SMC_TDF_(1)), -+ AT91C_BASE_SMC + SMC_CTRL3); -+ -+ /* Configure the PIO controller */ -+ if (get_cm_rev() == 'A') -+ pio_configure(nand_pins_lo); -+ else -+ pio_configure(nand_pins_hi); -+ -+ writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC)); -+} -+ -+void nandflash_config_buswidth(unsigned char busw) -+{ -+ unsigned long csa; -+ -+ csa = readl(AT91C_BASE_SMC + SMC_CTRL3); -+ -+ if (busw == 0) -+ csa |= AT91C_SMC_DBW_WIDTH_BITS_8; -+ else -+ csa |= AT91C_SMC_DBW_WIDTH_BITS_16; -+ -+ writel(csa, AT91C_BASE_SMC + SMC_CTRL3); -+} -+#endif /* #ifdef CONFIG_NANDFLASH */ -- cgit v1.2.3