summaryrefslogtreecommitdiff
path: root/recipes-kernel
AgeCommit message (Expand)AuthorFiles
2019-12-11Add new package rs9113-rm to remove rs9113 packages from devices with no rs91...John Klug3
2019-10-03Bump kernel revision for Quectel patchJohn Klug1
2019-10-03Adding tmp102 module to the available modulesJohn Klug1
2019-10-02new rs9113rf commands with maximum flexibilityJohn Klug4
2019-09-26Update QMI WWAN patch for QuectelJeff Hatch1
2019-08-15rs9113-btclonly depends on rs9113-noarchJohn Klug1
2019-07-29Add linux-4.9-quectel_qmi_wwan_support.patch to linux-at91_4.9.87.bb recipeJeff Hatch1
2019-07-29Merge branch 'master' of gitlab.multitech.net:mirrors/meta-multitechJeff Hatch2
2019-07-29Additional updates to qmi for Quectel radio supportJeff Hatch1
2019-06-25btclonly package for rs9113, and mths compatible "machine" for kernelJohn Klug2
2019-06-17150mS does not work with MTHS, so try 300mS timeout on PMECCJohn Klug2
2019-05-31Add the xt physdev match module for MTHSJohn Klug1
2019-05-28Remove vbus-gpio which breaks the USB interface.John Klug2
2019-05-24Set output low on the GNSS-RESET lineJohn Klug1
2019-05-23Add support to option driver for Quectel EG95Jeff Hatch2
2019-05-23GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VIDJohn Klug2
2019-05-16Allow for antenna gain in wf commandJohn Klug3
2019-05-09Bump the version of rs9113rfJohn Klug1
2019-05-09Add device type to signal stop.John Klug1
2019-05-08Bump revision of rs9113rf to fix antenna portJohn Klug1
2019-05-08Wrong antenna portJohn Klug1
2019-05-07Bump the revision of the kernel for new device treeJohn Klug1
2019-05-07Remove unused mmc pins, and put in PD14-PD20 in mtrv1John Klug1
2019-05-07rs9113 1.6.1 requires a base_interface name for the transmit commandJohn Klug3
2019-04-24Use output-high for MTCDT PD14-PD19 resetsJohn Klug1
2019-04-24Autoload i2c-dev for LoRa usersJohn Klug1
2019-04-17Use Redpine bridge patchJohn Klug2
2019-04-17Use Redpine bridge patchJohn Klug2
2019-04-15Remove unused mmc1-boardJohn Klug1
2019-04-05Syntax error in device treeJohn Klug1
2019-04-05Missing semicolon in device tree.John Klug1
2019-04-05Typo in name of patch for led brightnessJohn Klug1
2019-04-04Fix LED status on upgrade.John Klug2
2019-04-04Correct the SDIO active pin to PA1, and set deglitchJohn Klug1
2019-03-27Blink LEDs when kernel loads, not when modules loadJohn Klug2
2019-03-25Bump the version of rs9113 for new firmware and WEP fix.John Klug2
2019-03-22Bump kernel revision for CGROUPSJohn Klug1
2019-03-21Remove BLK_CGROUP and add PROC_EVENTS, and take the consequences from make me...John Klug1
2019-03-21Make defconfig compatible with make menuconfig again.John Klug1
2019-03-19rs9113-autostart depends on rs9113-noarchJohn Klug1
2019-03-19rs9113 startup moved to package rs9113-autostartJohn Klug3
2019-03-18rs9113 package arch updates (all, arm926ejste)John Klug1
2019-03-08Bump the version of rs9113 package to correspond to driver patchJohn Klug2
2019-03-04All LTE MTR types can user B18 as the PPS signalJohn Klug1
2019-03-04Change pps to pps-0 in device tree to allow for multiple entries.John Klug1
2019-03-01Add rising edge IRQ to Murata - this is required for proper interruptMike Nicholson1
2019-03-01Use timing from previous software iterations.Mike Nicholson1
2019-02-27Enable/disable murata in wl12xx SDIO driver; deglitch, remove pull-downMike Nicholson3
2019-02-26Security enhancement (ASLR) : Disable CONFIG_COMPAT_BRK so that randomize_va_...Jeff Hatch1
2019-02-22Make it clear why there are two PPS pins definedJohn Klug1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 20:25:31 +0000