index
:
meta-multitech.git
3
3.19-dt-overlay
4
5.3.x
master
MultiTech BSP Layer
Multi-Tech Systems
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
recipes-kernel
/
linux
Age
Commit message (
Collapse
)
Author
Files
2019-07-03
Add a couple jiffies of slack in the PMECCERRLOC
Mike Nicholson
2
2019-07-03
DMA for dbgu on MTCDT, and MTCAP (MTCAP requires testing)
Mike Nicholson
2
2019-07-03
Enable DMA on dbgu serial (fixes overrun issue)
Mike Nicholson
1
2019-07-03
Add DMA to uart0, delete m25p80
Mike Nicholson
1
2019-07-03
Add mts-io/John's radio reset, remove m25p80, remove 16-bit nand, streamline ↵
Mike Nicholson
1
uart0 DMA
2019-07-03
Use DMA for Venus on gps0/ttyS1, get Venus working
Mike Nicholson
1
2019-07-03
Pull down for radio monitor on mtrv1
John Klug
1
2019-07-03
Original MTR, initial revision
Mike
3
2019-07-03
Pins must be set from a driver. Tie the radio pins to the MTS-IO driver.
John Klug
1
2019-07-03
PD21 should be pull down, remove conflicting unused NAND.
John Klug
1
2019-07-03
Add Telit Sprint patch for LXFP.
John Klug
2
2019-07-03
ledtrig-netdev patch for compatibility with old Multitech code
John Klug
4
2019-07-03
Bump the kernel and mts-io revision
John Klug
1
2019-07-03
Remove uneeded devices from device tree and get SPI working.
John Klug
1
2019-07-03
Remove unused m25p80 module.
John Klug
1
2019-07-03
Create device tree for mtcap, and move common patches to common
John Klug
2
2019-07-03
dma hangs GPS port.
John Klug
3
2019-07-03
Fix bitbake issues with machine variables and underscores
John Klug
3
2019-07-03
Change watchdog timer from 2 to 10 seconds to match old kernel.
John Klug
2
2019-07-03
Remove some of the dependent modules
John Klug
2
2019-07-03
Load tun, iptable-netfilter, ppp-generic at boot, and add more led module ↵
John Klug
3
options to kernel
2019-07-03
Put back Vizzini driver and install the kernel patch
John Klug
2
2019-07-03
Add *.inc files with modules to autoload on boot.
John Klug
7
2019-07-03
Add pre-emption, required by MTCDT
John Klug
3
2019-07-03
Devices to the end of defconfig. Missing CONFIG_HWMON
John Klug
2
2019-07-03
Hopefully correct up to Device Drivers, Generic Driver Options. TBD reset ↵
John Klug
2
of defconfig
2019-07-03
Add bluetooth support to mtrv1 and mtcdt
John Klug
2
2019-07-03
Two MTAC ports for mtcdt (Thanks, John!)
Mike Nicholson
1
2019-07-03
Bump kernel revision with new EXTRA Version code
John Klug
1
2019-07-03
Create EXTRAVERSION variable linux original Linux source
John Klug
1
2019-07-03
Enable Option driver support for Telit, et al.
Mike Nicholson
2
2019-07-03
Add pull-up patch for MTRv1 radio power / reset
Mike Nicholson
2
2019-07-03
Sanitize the version of the kernel removing dirty and at91
John Klug
3
2019-07-03
Simplify package updates with OPKG
John Klug
1
2019-07-03
Rename the kernel to be compatible with existing recipes (and shorter)
John Klug
16
2019-07-03
Device Tree patch with working EEPROM section
John Klug
1
2019-07-03
Remove get_single_ended for now because it clears pull-up flag
John Klug
1
2019-07-03
Fix ethernet driver
John Klug
1
2019-07-03
Fix partition table in device tree
John Klug
1
2019-07-03
First stab at mtrv1
John Klug
3
2019-07-03
Fix the stack trace problem because of the generic compatiblity in the SPI ↵
John Klug
3
in device tree
2019-07-03
GPIO_PULLUP should be a bit in gpio.h
John Klug
1
2019-07-03
Add PULLUP feature to of_find_gpio()
John Klug
1
2019-07-03
Put BPIO PULLUP feature in device tree
John Klug
1
2019-07-03
gpio/pinctrl Pullup/OpenDrain patch
John Klug
2
2019-07-03
Add at91pinctrl reprobe. May need node specification later.
John Klug
2
2019-07-03
Allow overlay device tree file system, remove dtc that does not work with ↵
John Klug
4
overlays
2019-07-03
fixdep is needed for deviced tree compiles
John Klug
1
2019-07-03
Add device tree bingings to machine SYSROOT
John Klug
1
2019-07-03
Remove unused i2c because it renumbers the i2c bus (fixes i2c driver path ↵
John Klug
1
compatibility)
[next]