summaryrefslogtreecommitdiff
path: root/recipes-kernel/linux
AgeCommit message (Collapse)AuthorFiles
2019-07-03Add support to option driver for Quectel EG955.0.0Jeff Hatch2
2019-07-03GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VIDJohn Klug2
2019-07-03Bump the revision of the kernel for new device treeJohn Klug1
2019-07-03Remove unused mmc pins, and put in PD14-PD20 in mtrv1John Klug1
2019-07-03Use output-high for MTCDT PD14-PD19 resetsJohn Klug1
2019-07-03Autoload i2c-dev for LoRa usersJohn Klug1
2019-07-03Remove unused mmc1-boardJohn Klug1
2019-07-03Syntax error in device treeJohn Klug1
2019-07-03Missing semicolon in device tree.John Klug1
2019-07-03Typo in name of patch for led brightnessJohn Klug1
2019-07-03Fix LED status on upgrade.John Klug2
2019-07-03Correct the SDIO active pin to PA1, and set deglitchJohn Klug1
2019-07-03Blink LEDs when kernel loads, not when modules loadJohn Klug2
2019-07-03Bump kernel revision for CGROUPSJohn Klug1
2019-07-03Remove BLK_CGROUP and add PROC_EVENTS, and take the consequences from make ↵John Klug1
menuconfig
2019-07-03Make defconfig compatible with make menuconfig again.John Klug1
2019-07-03All LTE MTR types can user B18 as the PPS signalJohn Klug1
2019-07-03Change pps to pps-0 in device tree to allow for multiple entries.John Klug1
2019-07-03Add rising edge IRQ to Murata - this is required for proper interruptMike Nicholson1
handling.
2019-07-03Use timing from previous software iterations.Mike Nicholson1
2019-07-03Enable/disable murata in wl12xx SDIO driver; deglitch, remove pull-downMike Nicholson3
on IRQ (to match current production)
2019-07-03Security enhancement (ASLR) : Disable CONFIG_COMPAT_BRK so that ↵Jeff Hatch1
randomize_va_space set to 2 by default
2019-07-03Make it clear why there are two PPS pins definedJohn Klug1
2019-07-03Add PPS for MTRV1-0.0 and MTRV1-0.1John Klug1
2019-07-03Add the DT Overlay patch to kernel for MTRV1John Klug1
2019-07-03Add DMA to dbgu (not on uart0)Mike Nicholson1
2019-07-03Add a couple jiffies of slack in the PMECCERRLOCMike Nicholson2
2019-07-03DMA for dbgu on MTCDT, and MTCAP (MTCAP requires testing)Mike Nicholson2
2019-07-03Enable DMA on dbgu serial (fixes overrun issue)Mike Nicholson1
2019-07-03Add DMA to uart0, delete m25p80Mike Nicholson1
2019-07-03Add mts-io/John's radio reset, remove m25p80, remove 16-bit nand, streamline ↵Mike Nicholson1
uart0 DMA
2019-07-03Use DMA for Venus on gps0/ttyS1, get Venus workingMike Nicholson1
2019-07-03Pull down for radio monitor on mtrv1John Klug1
2019-07-03Original MTR, initial revisionMike3
2019-07-03Pins must be set from a driver. Tie the radio pins to the MTS-IO driver.John Klug1
2019-07-03PD21 should be pull down, remove conflicting unused NAND.John Klug1
2019-07-03Add Telit Sprint patch for LXFP.John Klug2
2019-07-03ledtrig-netdev patch for compatibility with old Multitech codeJohn Klug4
2019-07-03Bump the kernel and mts-io revisionJohn Klug1
2019-07-03Remove uneeded devices from device tree and get SPI working.John Klug1
2019-07-03Remove unused m25p80 module.John Klug1
2019-07-03Create device tree for mtcap, and move common patches to commonJohn Klug2
2019-07-03dma hangs GPS port.John Klug3
2019-07-03Fix bitbake issues with machine variables and underscoresJohn Klug3
2019-07-03Change watchdog timer from 2 to 10 seconds to match old kernel.John Klug2
2019-07-03Remove some of the dependent modulesJohn Klug2
2019-07-03Load tun, iptable-netfilter, ppp-generic at boot, and add more led module ↵John Klug3
options to kernel
2019-07-03Put back Vizzini driver and install the kernel patchJohn Klug2
2019-07-03Add *.inc files with modules to autoload on boot.John Klug7
2019-07-03Add pre-emption, required by MTCDTJohn Klug3
generated by cgit v1.2.3 (git 2.25.1) at 2026-11-08 15:53:57 +0000