summaryrefslogtreecommitdiff
path: root/recipes-bsp/multitech/mts-io
AgeCommit message (Collapse)AuthorFiles
2022-09-22MTX-4646 MTCDT3AC: Fix mts-io init script to properly handle new MTCDT3AC ↵Vyacheslav Pedash1
hardware version
2022-08-23MTX-4571 MTCDT3AC: Add gps link to UART4 for the MTCPM rev 0.2Vyacheslav Pedash1
2022-02-18Prevent waiting for the supercap when the EEPROM is not writtenJohn Klug1
2022-02-04Add MTCDTIP case to call modprobe spidev in mts-io.initJason Reiss1
2022-01-13Remove extra resets caused by new at91bootstrapJohn Klug1
2022-01-11suppress rs9113 reset until /etc/init.d/rs9113John Klug1
2022-01-11Support for MTCDTIP with overlayJohn Klug2
2021-12-23Remove unnecessary patches for mts-io. Switch mtac-lora from 1.1.5 to 1.1.9.Andrii Pientsov2
2021-11-18Remove rs9113 reset from /etc/init.d/mts-io, as it is redundantJohn Klug1
2021-11-18Add the names of the GPIOs for the MTCDT-0.2 IO expanderJohn Klug1
2021-11-18Development patch for MTCDT-0.2 mts-ioJohn Klug1
2021-11-18Move gps0 symlink to UDEVJohn Klug1
2021-10-29remove spidev linking from mts-io initJason Reiss1
2021-10-29Revert "Revert "Added support for mtac-003""Jason Reiss1
This reverts commit 5ec3c59dd16c42c4bade24ee75773a8764fcb01e.
2021-10-25Revert "Added support for mtac-003"Harsh Sharma1
This reverts commit d390864f59232db90b80e5e65705c03687db2f1a.
2021-10-14Added support for mtac-003Harsh Sharma1
2021-10-05mts-io init script must set serial link even when there is no GPSJohn Klug1
2021-09-07Add radio-reset notification, new MTRV1-0.4 hardwareJohn Klug1
2021-03-26Fix bugs in init script, add mts-io-skipcharge package for development and ↵John Klug1
testing
2021-02-15Wait for supercap charge up to 3 minutes. Poweroff if no powerJohn Klug2
2021-01-22linux 5.4: move to mts-io 4.5.2 (with 5.4.81 fixes)Mykyta Dorokhin1
2021-01-18linux 5.4: fix mts-io for the 5.4.81Mykyta Dorokhin1
2020-12-14MTCDT3 needs no symlink for spiJohn Klug1
2020-10-30Load accessory cards for MTCDT3John Klug1
2020-10-30Set battery voltage for mtcap with battery capabilityJohn Klug1
2020-10-29GPS should depend on CPU hw_type, not base boardJohn Klug1
2020-10-26overlay has its own init script, remove mtcdt3b during stop, fix gps on MTCPM-BBJohn Klug1
2020-09-18Fix misspelling and remove debug from /etc/init.d/mts-ioJohn Klug1
2020-09-18Update mts-io driver for GPS on MTCAPJohn Klug1
2020-09-18Move overlay code from mts-io to mt-dt-overlayJohn Klug2
2020-08-28Add mt-dt-overlay to support GPS PPS on mtcapMike Nicholson1
2020-05-14Add mts-io 4.3.0 from arch/common branch multiarch5-thudAndrii Pientsov1
2019-05-23GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VIDJohn Klug1
2019-04-24Blacklist mts-io driver so it is not loaded by device tree.John Klug1
2019-04-05Typo in name of patch for led brightnessJohn Klug1
2019-03-04Create routine in mts-io init script to load device tree.John Klug1
2019-02-27Add new file /var/run/config/gpstypeJohn Klug1
2019-02-19Only MTRV1-0.0 of MTRV1 Uses /dev/ttyS1John Klug1
2019-02-19Set /dev/gps0, even if gps capability flag is false.John Klug1
2019-01-25Add spidev driver for LoRa.John Klug2
2019-01-24Enable eeprom read from mts-ioJohn Klug1
2019-01-24Remove unused code that produces errors in mts-io init script.John Klug1
2019-01-21Put back Vizzini driver and install the kernel patchJohn Klug1
2019-01-08Update the tty drivers to the Linux 4 nameJohn Klug1
2019-01-07Report firmware directory to kernel before modprobe.Mike Nicholson1
2019-01-07Add call to inform kernel about firmware (i2c EEPROM) locationMike Nicholson1
2018-11-19Add code to read hw-version from EEPROMJohn Klug1
2018-10-15Split mts-io driver module into separate modules.John Klug1
2018-08-29Simpler check for MTCDTIPHP4.0.2John Klug1
2018-08-29mts-io init script adjusted for MTCDTIPHP with no GPS capability flagJohn Klug1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 13:05:18 +0000