summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2019-07-03btclonly package for rs9113, and mths compatible "machine" for kernelJohn Klug2
2019-07-03150mS does not work with MTHS, so try 300mS timeout on PMECCJohn Klug2
2019-07-03Add the xt physdev match module for MTHSJohn Klug1
2019-07-03Remove vbus-gpio which breaks the USB interface.John Klug2
2019-07-03MTHS hardware version change (no wifi LED)John Klug1
2019-07-03Set output low on the GNSS-RESET lineJohn Klug1
2019-07-03Add support to option driver for Quectel EG955.0.0Jeff Hatch2
2019-07-03GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VIDJohn Klug6
2019-07-03New version of MTS-IO for MTQ MTR support.John Klug1
2019-07-03Allow for antenna gain in wf commandJohn Klug3
2019-07-03Remove gitlab from mt-dt-overlay buildJohn Klug1
2019-07-03Everything being done from dtoverlay can be done with bash and existing ↵John Klug2
commands.
2019-07-03Move mtac to the meta-multitech repositoryJohn Klug1
2019-07-03Switch to mtac-gpiob 1.1.2 on multitech.netJohn Klug1
2019-07-03Move mts-io to multitech.netJohn Klug1
2019-07-03Bump the version of rs9113rfJohn Klug1
2019-07-03Add device type to signal stop.John Klug1
2019-07-03Bump revision of rs9113rf to fix antenna portJohn Klug1
2019-07-03Wrong antenna portJohn Klug1
2019-07-03Bump the revision of the kernel for new device treeJohn Klug1
2019-07-03Remove unused mmc pins, and put in PD14-PD20 in mtrv1John Klug1
2019-07-03rs9113 1.6.1 requires a base_interface name for the transmit commandJohn Klug3
2019-07-03Blacklist mts-io driver so it is not loaded by device tree.John Klug2
2019-07-03Use output-high for MTCDT PD14-PD19 resetsJohn Klug1
2019-07-03Autoload i2c-dev for LoRa usersJohn Klug2
2019-07-03Use Redpine bridge patchJohn Klug2
2019-07-03Use Redpine bridge patchJohn Klug2
2019-07-03New bootstrap 3.8.12 with ONFIJohn Klug4
2019-07-03Move bootstrap to ONFI compatible 3.8.12John Klug23
2019-07-03Reduce the activity on the WIFI-BT RESET (PD14) during at91bootstrapJohn Klug2
2019-07-03Remove unused mmc1-boardJohn Klug1
2019-07-03Remove garbage from mtcdt bootstrap patchJohn Klug1
2019-07-03Disable USB, which otherwise will use pins PD18-PD20John Klug2
2019-07-03Syntax error in device treeJohn Klug1
2019-07-03Missing semicolon in device tree.John Klug1
2019-07-03Typo in name of patch for led brightnessJohn Klug3
2019-07-03Bump the at91bootstrap revisionJohn Klug1
2019-07-03Pin High GPIO pins that overlap with PIOBJohn Klug1
2019-07-03Pin High GPIO pins that overlap with PIOBJohn Klug1
2019-07-03Fix LED status on upgrade.John Klug2
2019-07-03Correct the SDIO active pin to PA1, and set deglitchJohn Klug1
2019-07-03Blink LEDs when kernel loads, not when modules loadJohn Klug2
2019-07-03Bump the version of rs9113 for new firmware and WEP fix.John Klug2
2019-07-03Bump kernel revision for CGROUPSJohn Klug1
2019-07-03Remove BLK_CGROUP and add PROC_EVENTS, and take the consequences from make ↵John Klug1
menuconfig
2019-07-03Make defconfig compatible with make menuconfig again.John Klug1
2019-07-03rs9113-autostart depends on rs9113-noarchJohn Klug1
2019-07-03rs9113 startup moved to package rs9113-autostartJohn Klug3
2019-07-03rs9113 package arch updates (all, arm926ejste)John Klug1
2019-07-03Bump the version of rs9113 package to correspond to driver patchJohn Klug2
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 23:19:29 +0000