meta-multitech.git - MultiTech BSP Layer

Age	Commit message (Collapse)	Author	Files
2015-01-15	linux-3.12.27: mtcdt: disable ssc03.0.1	Jesse Gilles	2
	ssc0 is not used and this fixes LED behavior on boot
2015-01-15	contrib/uboot-setenv-mtcdt.minicom: set bootargs to mem=256M	Jesse Gilles	1

2015-01-13	u-boot-2012.10: mtcdt: update to 256MB RAM	Jesse Gilles	2

2015-01-13	at91bootstrap-3.5.3: mtcdt: update to 256MB RAM	Jesse Gilles	2

2015-01-13	linux-3.12.27: mtcdt: enable FANOTIFY	Jesse Gilles	2

2015-01-09	mtcdt: use mts-io 1.1.0	Jesse Gilles	1

2015-01-09	mts-io: update to 1.1.0	Jesse Gilles	1
	adds mtac-lora support
2015-01-07	linux-3.12.27: add linux-3.12-spi-atmel-dma-min.patch, build spi-atmel as module	Jesse Gilles	3
	Forces spi-atmel to always use DMA mode instead of switching between PIO and DMA depending on the transfer size. Switching between the two can cause Rx buffer corruption with the 3.12 driver. This comes at the cost of lower performance (15 to 20%) for small transfers (1-15 bytes), but improves reliability for protocols that use small and large transfers regularly. For large transfers (1024 bytes), DMA mode is 300% faster than PIO. https://lkml.org/lkml/2013/10/21/534
2014-12-12	linux-3.12.27: mtcdt.dts: fix spi dts	Jesse Gilles	1

2014-12-12	linux-3.12.27: mtcdt.dts: update SPI CS pins, add spidev on CS2	Jesse Gilles	2

2014-12-03	linux-3.12.27: defconfig: add some CRYPTO modules	Jesse Gilles	1

2014-11-05	linux-3.12.27: mtcdt: add pps-gpio pin for AP1	Jesse Gilles	1

2014-11-04	mts-io: fix default SRCREV	Jesse Gilles	1

2014-11-04	mtcdt: use mts-io 1.0.0	Jesse Gilles	1

2014-11-04	mts-io: version 1.0.0	Jesse Gilles	2

2014-11-04	linux-3.12.17: mtcdt: relabel controllable LEDs to status, a, b, c, d	Jesse Gilles	2

2014-11-04	mts-io: update git rev	Jesse Gilles	1

2014-11-04	mts-io: rename led-a_heartbeat_trigger to led-status_hearbeat_trigger	Jesse Gilles	2

2014-11-04	initial commit with MTCDT support	Jesse Gilles	47