summaryrefslogtreecommitdiff
path: root/recipes-kernel
diff options
context:
space:
mode:
Diffstat (limited to 'recipes-kernel')
-rw-r--r--recipes-kernel/linux/linux-at91-4.9.87/mtcap/linux-4.9-mtcap-device-tree.patch476
-rw-r--r--recipes-kernel/linux/linux-at91_4.9.87.bb17
2 files changed, 485 insertions, 8 deletions
diff --git a/recipes-kernel/linux/linux-at91-4.9.87/mtcap/linux-4.9-mtcap-device-tree.patch b/recipes-kernel/linux/linux-at91-4.9.87/mtcap/linux-4.9-mtcap-device-tree.patch
new file mode 100644
index 0000000..3b3de8a
--- /dev/null
+++ b/recipes-kernel/linux/linux-at91-4.9.87/mtcap/linux-4.9-mtcap-device-tree.patch
@@ -0,0 +1,476 @@
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5cm.dtsi linux-4.9.87/arch/arm/boot/dts/at91sam9x5cm.dtsi
+--- linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5cm.dtsi 2019-01-24 11:31:55.474263111 -0600
++++ linux-4.9.87/arch/arm/boot/dts/at91sam9x5cm.dtsi 2019-01-24 12:23:10.802172067 -0600
+@@ -43,48 +43,8 @@
+ atmel,has-pmecc; /* Enable PMECC */
+ atmel,pmecc-cap = <2>;
+ atmel,pmecc-sector-size = <512>;
+- nand-on-flash-bbt;
++ /* nand-on-flash-bbt; */
+ status = "okay";
+-
+- at91bootstrap@0 {
+- label = "at91bootstrap";
+- reg = <0x0 0x40000>;
+- };
+-
+- uboot@40000 {
+- label = "u-boot";
+- reg = <0x40000 0x80000>;
+- };
+-
+- ubootenv@c0000 {
+- label = "U-Boot Env";
+- reg = <0xc0000 0x140000>;
+- };
+-
+- kernel@200000 {
+- label = "kernel";
+- reg = <0x200000 0x600000>;
+- };
+-
+- rootfs@800000 {
+- label = "rootfs";
+- reg = <0x800000 0x1f800000>;
+- };
+- };
+- };
+-
+- leds {
+- compatible = "gpio-leds";
+-
+- pb18 {
+- label = "pb18";
+- gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+- linux,default-trigger = "heartbeat";
+- };
+-
+- pd21 {
+- label = "pd21";
+- gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+@@ -96,5 +56,4 @@
+ pinctrl-0 = <&pinctrl_1wire_cm>;
+ status = "okay";
+ };
+-
+ };
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5.dtsi linux-4.9.87/arch/arm/boot/dts/at91sam9x5.dtsi
+--- linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5.dtsi 2019-01-24 11:31:55.590263108 -0600
++++ linux-4.9.87/arch/arm/boot/dts/at91sam9x5.dtsi 2019-01-24 12:23:10.802172067 -0600
+@@ -32,9 +32,6 @@
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+- i2c0 = &i2c0;
+- i2c1 = &i2c1;
+- i2c2 = &i2c2;
+ ssc0 = &ssc0;
+ pwm0 = &pwm0;
+ };
+@@ -963,50 +960,7 @@
+ status = "disabled";
+ };
+
+- i2c0: i2c@f8010000 {
+- compatible = "atmel,at91sam9x5-i2c";
+- reg = <0xf8010000 0x100>;
+- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+- dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+- <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+- dma-names = "tx", "rx";
+- #address-cells = <1>;
+- #size-cells = <0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c0>;
+- clocks = <&twi0_clk>;
+- status = "disabled";
+- };
+-
+- i2c1: i2c@f8014000 {
+- compatible = "atmel,at91sam9x5-i2c";
+- reg = <0xf8014000 0x100>;
+- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+- dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+- <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+- dma-names = "tx", "rx";
+- #address-cells = <1>;
+- #size-cells = <0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c1>;
+- clocks = <&twi1_clk>;
+- status = "disabled";
+- };
+-
+- i2c2: i2c@f8018000 {
+- compatible = "atmel,at91sam9x5-i2c";
+- reg = <0xf8018000 0x100>;
+- interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+- dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+- <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+- dma-names = "tx", "rx";
+- #address-cells = <1>;
+- #size-cells = <0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c2>;
+- clocks = <&twi2_clk>;
+- status = "disabled";
+- };
++ /* /delete_node/ command does not work. */
+
+ uart0: serial@f8040000 {
+ compatible = "atmel,at91sam9260-usart";
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5ek.dtsi linux-4.9.87/arch/arm/boot/dts/at91sam9x5ek.dtsi
+--- linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5ek.dtsi 2019-01-24 11:31:55.590263108 -0600
++++ linux-4.9.87/arch/arm/boot/dts/at91sam9x5ek.dtsi 2019-01-24 12:23:10.802172067 -0600
+@@ -25,23 +25,11 @@
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
++ /* external micro SD slot */
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+- cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+- };
+- };
+-
+- mmc1: mmc@f000c000 {
+- pinctrl-0 = <
+- &pinctrl_board_mmc1
+- &pinctrl_mmc1_slot0_clk_cmd_dat0
+- &pinctrl_mmc1_slot0_dat1_3>;
+- status = "okay";
+- slot@0 {
+- reg = <0>;
+- bus-width = <4>;
+- cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
++ cd-gpios = <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+@@ -58,25 +46,12 @@
+ usb2: gadget@f803c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_board_usb2>;
+- atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+- status = "okay";
+- };
+-
+- i2c0: i2c@f8010000 {
+- status = "okay";
+-
+- wm8731: wm8731@1a {
+- compatible = "wm8731";
+- reg = <0x1a>;
+- };
+- };
+-
+- adc0: adc@f804c000 {
+- atmel,adc-ts-wires = <4>;
+- atmel,adc-ts-pressure-threshold = <10000>;
++ /* atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; mtcdt: no vbus-gpio */
+ status = "okay";
+ };
+
++ /* A/D convertor is unusable on Conduit */
++
+ pinctrl@fffff400 {
+ camera_sensor {
+ pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+@@ -118,7 +93,7 @@
+ };
+
+ spi0: spi@f0000000 {
+- status = "disabled"; /* conflict with mmc1 */
++ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+@@ -131,37 +106,20 @@
+ status = "okay";
+ };
+
+- ssc0: ssc@f0010000 {
+- status = "okay";
+- };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <3>;
+- atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+- &pioD 19 GPIO_ACTIVE_LOW
+- &pioD 20 GPIO_ACTIVE_LOW
+- >;
++ //mtcdt: no vbus-gpio
++ // atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
++ // &pioD 19 GPIO_ACTIVE_LOW
++ // &pioD 20 GPIO_ACTIVE_LOW
++ // >;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+-
+- sound {
+- compatible = "atmel,sam9x5-wm8731-audio";
+-
+- atmel,model = "wm8731 @ AT91SAM9X5EK";
+-
+- atmel,audio-routing =
+- "Headphone Jack", "RHPOUT",
+- "Headphone Jack", "LHPOUT",
+- "LLINEIN", "Line In Jack",
+- "RLINEIN", "Line In Jack";
+-
+- atmel,ssc-controller = <&ssc0>;
+- atmel,audio-codec = <&wm8731>;
+- };
+ };
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/Makefile linux-4.9.87/arch/arm/boot/dts/Makefile
+--- linux-4.9.87.orig/arch/arm/boot/dts/Makefile 2019-01-24 11:31:55.590263108 -0600
++++ linux-4.9.87/arch/arm/boot/dts/Makefile 2019-01-24 12:23:10.802172067 -0600
+@@ -43,7 +43,8 @@
+ at91sam9g25ek.dtb \
+ at91sam9g35ek.dtb \
+ at91sam9x25ek.dtb \
+- at91sam9x35ek.dtb
++ at91sam9x35ek.dtb \
++ mtcap.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-kizbox2.dtb \
+ at91-sama5d2_ptc_ek.dtb \
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/mtcap.dts linux-4.9.87/arch/arm/boot/dts/mtcap.dts
+--- linux-4.9.87.orig/arch/arm/boot/dts/mtcap.dts 1969-12-31 18:00:00.000000000 -0600
++++ linux-4.9.87/arch/arm/boot/dts/mtcap.dts 2019-01-24 12:41:55.170138780 -0600
+@@ -0,0 +1,225 @@
++/*
++ * DTS file for Multi-Tech Systems MTCAP Hardware
++ *
++ * Copyright (C) 2019 by Multi-Tech Systems,
++ *
++ * Licensed under GPLv2 or later.
++ */
++
++/dts-v1/;
++#include "at91sam9g25.dtsi"
++#include "at91sam9x5ek.dtsi"
++
++/ {
++ model = "Multi-Tech Systems MTCAP";
++ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
++
++ chosen {
++ bootargs = "mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2";
++ };
++
++ aliases {
++ spi0 = &spi0;
++ };
++
++ memory {
++ reg = <0x20000000 0x8000000>;
++ };
++
++ clocks {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ main_clock: clock@0 {
++ compatible = "atmel,osc", "fixed-clock";
++ clock-frequency = <12000000>;
++ };
++ };
++
++ ahb {
++ apb {
++ macb0: ethernet@f802c000 {
++ phy-mode = "rmii";
++ status = "okay";
++ };
++
++ mmc0: mmc@f0008000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <
++ /* &pinctrl_board_mmc0 */
++ &pinctrl_mmc0_slot0_clk_cmd_dat0
++ &pinctrl_mmc0_slot0_dat1_3>;
++ status = "okay";
++ slot@0 {
++ reg = <0>;
++ bus-width = <4>;
++ };
++ };
++
++ pinctrl@fffff400 {
++ mmc0 {
++ pinctrl_board_mmc0: mmc0-board {
++ atmel,pins =
++ <AT91_PIOA 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA4 gpio pin pull up and deglitch - WIFI enable */
++ };
++ };
++
++ nand {
++ pinctrl_nand: nand-0 {
++ atmel,pins =
++ <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A Read Enable */
++ AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD1 periph A Write Enable */
++ AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A Address Latch Enable */
++ AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A Command Latch Enable */
++ AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */
++ AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC31 gpio RDY/BUSY pin pull_up */
++ AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A Data bit 0 */
++ AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A Data bit 1 */
++ AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD8 periph A Data bit 2 */
++ AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD9 periph A Data bit 3 */
++ AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD10 periph A Data bit 4 */
++ AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD11 periph A Data bit 5 */
++ AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD12 periph A Data bit 6 */
++ AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD13 periph A Data bit 7 */
++ };
++
++ pinctrl_nand_16bits: nand_16bits-0 {
++ atmel,pins =
++ <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD14 periph A Data bit 8 */
++ AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD15 periph A Data bit 9 */
++ AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD16 periph A Data bit 10 */
++ AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD17 periph A Data bit 11 */
++ AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD18 periph A Data bit 12 */
++ AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD19 periph A Data bit 13 */
++ AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD20 periph A Data bit 14 */
++ AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD21 periph A Data bit 15 */
++ };
++ };
++
++ radio_control {
++ pinctrl_radio_control: radio_control-0 {
++ atmel,pins =
++ <AT91_PIOA 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA21 GPIO pull-up radio-power */
++ AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PA22 GPIO pull-up radio-reset */
++ };
++ };
++ };
++
++ rtc@fffffeb0 {
++ status = "okay";
++ };
++
++ dbgu: serial@fffff200 {
++ status = "okay";
++ };
++
++ usb2: gadget@f803c000 {
++ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++ };
++ watchdog@fffffe40 {
++ status = "okay";
++ };
++ };
++
++ nand0: nand@40000000 {
++ nand-bus-width = <8>;
++ nand-ecc-mode = "hw";
++ atmel,has-pmecc; /* Enable PMECC */
++ atmel,pmecc-sector-size = <512>;
++ status = "okay";
++ reg = < 0x40000000 0x10000000
++ 0xffffe000 0x600 /* PMECC Registers */
++ 0xffffe600 0x200 /* PMECC Error Location Registers */
++ 0x00100000 0x100000 /* PMECC looup table in ROM code */
++ >;
++ atmel,pmecc-lookup-table-offset = <0x8000 0x10000>;
++ gpios = < &pioC 31 GPIO_ACTIVE_HIGH
++ &pioD 4 GPIO_ACTIVE_HIGH
++ 0
++ >;
++ atmel,pmecc-cap = <4>;
++ atmel,nand-has-dma;
++
++ nand@0 {
++ label = "NANDFlash";
++ reg = <0x0 0x10000000>;
++ };
++ at91bootstrap@0 {
++ label = "at91bootstrap";
++ reg = <0x0 0x40000>;
++ };
++ uboot@40000 {
++ label = "u-Boot";
++ reg = <0x40000 0x80000>;
++ };
++ ubootconfig0@c0000 {
++ label = "u-Boot Config";
++ reg = <0xc0000 0xa0000>;
++ };
++ ubootconfig1@160000 {
++ label = "u-Boot Redundant Config";
++ reg = <0x160000 0xa0000>;
++ };
++ uImage@200000 {
++ label = "uImage";
++ reg = <0x200000 0x600000>;
++ };
++ config0@800000 {
++ label = "Config";
++ reg = <0x800000 0x800000>;
++ };
++ config1@1000000 {
++ label = "OEM Config";
++ reg = <0x1000000 0x800000>;
++ };
++ rootfs@1800000 {
++ label = "Rootfs";
++ reg = <0x1800000 0xe800000>;
++ };
++ };
++
++ usb0: ohci@00600000 {
++ status = "okay";
++ num-ports = <3>;
++ };
++
++ usb1: ehci@00700000 {
++ status = "okay";
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ pc25 {
++ label = "led-status";
++ gpios = <&pioC 25 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++ pc15 {
++ label = "led-lora";
++ gpios = <&pioC 15 GPIO_ACTIVE_LOW>;
++ };
++ pc16 {
++ label = "led-cd";
++ gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
++ };
++ pc20 {
++ label = "led-wifi";
++ gpios = <&pioC 20 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ i2c@0 {
++ status = "okay";
++
++ id_eeprom@56 {
++ compatible = "atmel,24c04";
++ reg = <0x56>;
++ pagesize = <16>;
++ status = "okay";
++ };
++ };
++};
diff --git a/recipes-kernel/linux/linux-at91_4.9.87.bb b/recipes-kernel/linux/linux-at91_4.9.87.bb
index dab6acd..6624f5d 100644
--- a/recipes-kernel/linux/linux-at91_4.9.87.bb
+++ b/recipes-kernel/linux/linux-at91_4.9.87.bb
@@ -38,6 +38,9 @@ COMMON_PATCHES = " \
file://defconfig \
file://linux-4.9-pps-gpio.patch \
file://linux-4.9-at91sam9_wdt-10second-timeout.patch \
+ file://linux-4.9-spidev_squack.patch \
+ file://linux-4.9-add-num_accessory_ports-config-option.patch \
+ file://linux-4.9-cdc-acm-ignore-exar-devices.patch \
file://EXTRAVERSION.patch \
"
@@ -47,21 +50,19 @@ COMMON_PATCHES = " \
SRC_URI_append_mtcdt = "\
${COMMON_PATCHES} \
file://linux-4.9-mtcdt-device-tree.patch \
- file://linux-4.9-add-num_accessory_ports-config-option.patch \
- file://950-0090-OF-DT-Overlay-configfs-interface.patch \
- file://linux-4.9-spidev_squack.patch \
- file://linux-4.9-cdc-acm-ignore-exar-devices.patch \
"
SRC_URI_append_mtrv1 = "\
${COMMON_PATCHES} \
- file://defconfig \
file://linux-4.9-mtrv1-device-tree.patch \
- file://950-0090-OF-DT-Overlay-configfs-interface.patch \
- file://linux-4.9-spidev_squack.patch \
+ "
+SRC_URI_append_mtcap = "\
+ ${COMMON_PATCHES} \
+ file://linux-4.9-mtcap-device-tree.patch \
"
DTB_APPEND_mtcdt = "mtcdt"
DTB_APPEND_mtrv1 = "mtrv1"
+DTB_APPEND_mtcap = "mtcap"
python __anonymous () {
if d.getVar('UBOOT_FIT_IMAGE', True) == 'xyes':
@@ -92,7 +93,7 @@ kernel_do_configure_append() {
KERNEL_MODULE_PACKAGE_SUFFIX=""
-COMPATIBLE_MACHINE = "(mtcdt|mtrv1)"
+COMPATIBLE_MACHINE = "(mtcdt|mtrv1|mtr|mtcap)"
pkg_preinst_kernel-image-uimage() {
set -x
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-24 08:46:09 +0000