diff options
Diffstat (limited to 'recipes-kernel/rs9113/files/immunity/readme.txt')
-rw-r--r-- | recipes-kernel/rs9113/files/immunity/readme.txt | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/recipes-kernel/rs9113/files/immunity/readme.txt b/recipes-kernel/rs9113/files/immunity/readme.txt deleted file mode 100644 index 5dfcfde..0000000 --- a/recipes-kernel/rs9113/files/immunity/readme.txt +++ /dev/null @@ -1,53 +0,0 @@ -For wifi initialization to find the best BSSID's for testing: - /opt/immunity/tworadio.sh wifisetup - -Expect this in the output: - udhcpc (v1.22.1) started - Sending discover... - Sending discover... - Sending discover... - No lease, failing - -After doing wifisetup, it is possible to do a scan. - - iwlist wifi0 scanning - -This produces a list: - wifi0 Scan completed : - Cell 01 - Address: 00:27:0D:8C:57:28 - ESSID:"MTS-IT" - Mode:Master - Frequency:2.412 GHz - Quality:19/80 Signal level=-81 dBm Noise level:0 dBm - Encryption key:on - Bit Rates:5.5 Mb/s; 6 Mb/s; 9 Mb/s; 11 Mb/s; 12 Mb/s - 18 Mb/s; 24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s - IE: IEEE 802.11i/WPA2 Version 1 - Group Cipher : CCMP - Pairwise Ciphers (1) : CCMP - Authentication Suites (1) : PSK - Preauthentication Supported - -Find the ESSID desired, which may have multiple Addresses (BSSID). Also -observe the frequency. Select the BSSID (address) with the highest -"signal level" at the desired "frequency". - -Operation with no parameters: - -Environmental variables: - BTADDR Bluetooth MAC address of remote - BTCHAN Bluetooth Channel of service - WIFIURL WiFi URL of file to retrieve. - WIFIFILE WiFi File name of retrieved file to delete. - WPA_CONFIG Config file for wpa_supplicant. - -None of the parameters above are required. - - BTADDR and BTCHAN are searched, but specifying parameters is faster. - WIFIURL defaults to http://www.multitech.net/mlinux/feeds/3.2/arm926ejste/nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk - WIFIFILE defaults to nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk - WPA_CONFIG defaults to /etc/wpa_supplicant/wifitest.conf - - Two get a specific frequency at Multitech, since the same SID is used at - multiple frequencies, the BSSID must be provided in the WPA configuration - file.
\ No newline at end of file |