diff options
Diffstat (limited to 'recipes-bsp')
| -rw-r--r-- | recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch | 433 |
1 files changed, 429 insertions, 4 deletions
diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch index 7361cc6..26de833 100644 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch @@ -58,9 +58,51 @@ Index: git/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig +# CONFIG_DISABLE_WATCHDOG is not set Index: git/board/at91sam9x5ek/at91sam9x5ek.c =================================================================== ---- git.orig/board/at91sam9x5ek/at91sam9x5ek.c 2015-01-13 13:31:45.162884794 -0600 -+++ git/board/at91sam9x5ek/at91sam9x5ek.c 2015-01-13 13:31:45.426881419 -0600 -@@ -312,10 +312,8 @@ +--- git.orig/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-04 15:49:54.143358228 -0500 ++++ git/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-04 17:07:51.999219741 -0500 +@@ -53,6 +53,31 @@ + extern void hw_init_hook(void); + #endif + ++ ++static void initialize_mt_gpio(void) ++{ ++ /* Configure DBGU pins */ ++ const struct pio_desc mt_gpio_pins[] = { ++ /* Misc. pins -- Pins PD15-PD18 belong to PERIPH ++ * B A20-A25 until bootstrap shuts them down. ++ * This code prevents these pins from being used ++ * during boot, since we do not ++ * need these pins to boot the system and we ++ * do not want resets to toggle needlessly. ++ */ ++ {"GNSS-RESET",AT91C_PIN_PD(15), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"SECURE-RESET",AT91C_PIN_PD(16), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"MTQ-RESET",AT91C_PIN_PD(17), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"USBHUB-RESET",AT91C_PIN_PD(18), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"GNSS-INT",AT91C_PIN_PD(19), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"WIFI-BT-LPMODE",AT91C_PIN_PD(20), 0, PIO_PULLUP, PIO_INPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ pio_configure(mt_gpio_pins); ++} ++ ++ + static void at91_dbgu_hw_init(void) + { + /* Configure DBGU pins */ +@@ -198,6 +223,9 @@ + slowclk_enable_osc32(); + #endif + ++ /* Initialize MT GPIO */ ++ initialize_mt_gpio(); ++ + /* Initialize dbgu */ + initialize_dbgu(); + +@@ -322,10 +350,8 @@ reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); reg |= AT91C_EBI_CS3A_SM; @@ -73,7 +115,7 @@ Index: git/board/at91sam9x5ek/at91sam9x5ek.c reg &= ~AT91C_EBI_DRV; writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); -@@ -345,9 +343,7 @@ +@@ -355,9 +381,7 @@ AT91C_BASE_SMC + SMC_CTRL3); /* Configure the PIO controller */ @@ -84,3 +126,386 @@ Index: git/board/at91sam9x5ek/at91sam9x5ek.c pio_configure(nand_pins_hi); writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC)); +diff -aNru git.orig/board/at91sam9x5ek/at91sam9x5ek.c.orig git/board/at91sam9x5ek/at91sam9x5ek.c.orig +--- git.orig/board/at91sam9x5ek/at91sam9x5ek.c.orig 1969-12-31 18:00:00.000000000 -0600 ++++ git/board/at91sam9x5ek/at91sam9x5ek.c.orig 2019-04-04 17:06:31.091222136 -0500 +@@ -0,0 +1,379 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2008, Atmel Corporation ++ ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaimer below. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "common.h" ++#include "hardware.h" ++#include "arch/at91_ccfg.h" ++#include "arch/at91_rstc.h" ++#include "arch/at91_pmc.h" ++#include "arch/at91_smc.h" ++#include "arch/at91_pio.h" ++#include "arch/at91_ddrsdrc.h" ++#include "gpio.h" ++#include "pmc.h" ++#include "dbgu.h" ++#include "debug.h" ++#include "ddramc.h" ++#include "slowclk.h" ++#include "timer.h" ++#include "watchdog.h" ++#include "string.h" ++#include "at91sam9x5ek.h" ++ ++#include "onewire_info.h" ++ ++#define RTC_SCCR 0x1C ++#define RTC_IDR 0x24 ++ ++#ifdef CONFIG_USER_HW_INIT ++extern void hw_init_hook(void); ++#endif ++ ++static void at91_dbgu_hw_init(void) ++{ ++ /* Configure DBGU pins */ ++ const struct pio_desc dbgu_pins[] = { ++ {"RXD", AT91C_PIN_PA(9), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"TXD", AT91C_PIN_PA(10), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ pio_configure(dbgu_pins); ++ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); ++} ++ ++static void initialize_dbgu(void) ++{ ++ at91_dbgu_hw_init(); ++ dbgu_init(BAUDRATE(MASTER_CLOCK, BAUD_RATE)); ++} ++ ++#ifdef CONFIG_DDR2 ++/* Using the Micron MT47H64M16HR-3 */ ++static void ddramc_reg_config(struct ddramc_register *ddramc_config) ++{ ++ ddramc_config->mdr = (AT91C_DDRC2_DBW_16_BITS ++ | AT91C_DDRC2_MD_DDR2_SDRAM); ++ ++ ddramc_config->cr = (AT91C_DDRC2_NC_DDR10_SDR9 /* 10 column bits(1K) */ ++ | AT91C_DDRC2_NR_13 /* 13 row bits (8K) */ ++ | AT91C_DDRC2_CAS_3 /* CAS Latency 3 */ ++ | AT91C_DDRC2_NB_BANKS_8 /* 8 banks */ ++ | AT91C_DDRC2_DLL_RESET_DISABLED /* DLL not reset */ ++ | AT91C_DDRC2_DIC_DS /* Low DDR Drive Strength */ ++ | AT91C_DDRC2_DECOD_INTERLEAVED);/* Interleaved decode*/ ++ ++ /* ++ * Make sure to uncomment the following line if the DDR controller ++ * shares the EBI with another memory controller (SMC, NAND,..). ++ * For instance, AT91C_DDRC2_EBISHARE shall be set if NAND flash ++ * data line 0 is positioned on EBI data line 0 (AT91C_EBI_NFD0_ON_D16 bit ++ * cleared in CCFG_EBICSA register). ++ * ++ * For Atmel AT91SAM9x5-EK revision B onwards, this AT91C_DDRC2_EBISHARE bit ++ * is cleared because the NAND flash data line 0 is positioned on EBI ++ * data line number 16 (AT91C_EBI_NFD0_ON_D16 bit set in CCFG_EBICSA ++ * register). Only the DDR controller function is thus used on lower ++ * EBI data lines. ++ */ ++ //ddramc_config->cr |= AT91C_DDRC2_EBISHARE; /* DQM is shared with other controller */ ++ ++ ++ /* ++ * The DDR2-SDRAM device requires a refresh every 15.625 us or 7.81 us. ++ * With a 133 MHz frequency, the refresh timer count register must to be ++ * set with (15.625 x 133 MHz) ~ 2084 i.e. 0x824 ++ * or (7.81 x 133 MHz) ~ 1040 i.e. 0x410. ++ */ ++ ddramc_config->rtr = 0x411; /* Refresh timer: 7.8125us */ ++ ++ /* One clock cycle @ 133 MHz = 7.5 ns */ ++ ddramc_config->t0pr = (AT91C_DDRC2_TRAS_6 /* 6 * 7.5 = 45 ns */ ++ | AT91C_DDRC2_TRCD_2 /* 2 * 7.5 = 22.5 ns */ ++ | AT91C_DDRC2_TWR_2 /* 2 * 7.5 = 15 ns */ ++ | AT91C_DDRC2_TRC_8 /* 8 * 7.5 = 75 ns */ ++ | AT91C_DDRC2_TRP_2 /* 2 * 7.5 = 15 ns */ ++ | AT91C_DDRC2_TRRD_2 /* 2 * 7.5 = 15 ns */ ++ | AT91C_DDRC2_TWTR_2 /* 2 clock cycles min */ ++ | AT91C_DDRC2_TMRD_2); /* 2 clock cycles */ ++ ++ ddramc_config->t1pr = (AT91C_DDRC2_TXP_2 /* 2 clock cycles */ ++ | AT91C_DDRC2_TXSRD_200 /* 200 clock cycles */ ++ | AT91C_DDRC2_TXSNR_19 /* 19 * 7.5 = 142.5 ns*/ ++ | AT91C_DDRC2_TRFC_18); /* 18 * 7.5 = 135 ns */ ++ ++ ddramc_config->t2pr = (AT91C_DDRC2_TFAW_7 /* 7 * 7.5 = 52.5 ns */ ++ | AT91C_DDRC2_TRTP_2 /* 2 clock cycles min */ ++ | AT91C_DDRC2_TRPA_3 /* 3 * 7.5 = 22.5 ns */ ++ | AT91C_DDRC2_TXARDS_7 /* 7 clock cycles */ ++ | AT91C_DDRC2_TXARD_2); /* 2 clock cycles */ ++} ++ ++static void ddramc_init(void) ++{ ++ unsigned long csa; ++ struct ddramc_register ddramc_reg; ++ ++ ddramc_reg_config(&ddramc_reg); ++ ++ /* ENABLE DDR2 clock */ ++ writel(AT91C_PMC_DDR, AT91C_BASE_PMC + PMC_SCER); ++ ++ /* Chip select 1 is for DDR2/SDRAM */ ++ csa = readl(AT91C_BASE_CCFG + CCFG_EBICSA); ++ csa |= AT91C_EBI_CS1A_SDRAMC; ++ csa &= ~AT91C_EBI_DBPUC; ++ csa |= AT91C_EBI_DBPDC; ++ csa |= AT91C_EBI_DRV_HD; ++ ++ writel(csa, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* DDRAM2 Controller initialize */ ++ ddram_initialize(AT91C_BASE_DDRSDRC, AT91C_BASE_CS1, &ddramc_reg); ++} ++#endif /* #ifdef CONFIG_DDR2 */ ++ ++static void one_wire_hw_init(void) ++{ ++ const struct pio_desc wire_pio[] = { ++ {"1-Wire", AT91C_PIN_PB(18), 1, PIO_DEFAULT, PIO_OUTPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); ++ pio_configure(wire_pio); ++} ++ ++#ifdef CONFIG_HW_INIT ++void hw_init(void) ++{ ++ /* Disable watchdog */ ++ at91_disable_wdt(); ++ ++ /* At this stage the main oscillator is ++ *supposed to be enabled PCK = MCK = MOSC ++ */ ++ writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR); ++ ++ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ ++ pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT); ++ ++ /* PCK = PLLA/2 = 3 * MCK */ ++ pmc_cfg_mck(BOARD_PRESCALER_MAIN_CLOCK, PLL_LOCK_TIMEOUT); ++ ++ /* Switch MCK on PLLA output */ ++ pmc_cfg_mck(BOARD_PRESCALER_PLLA, PLL_LOCK_TIMEOUT); ++ ++ /*Enable External Reset */ ++ writel(AT91C_RSTC_KEY_UNLOCK | AT91C_RSTC_URSTEN, AT91C_BASE_RSTC + RSTC_RMR); ++ ++ /* Init timer */ ++ timer_init(); ++ ++#ifdef CONFIG_SCLK ++ slowclk_enable_osc32(); ++#endif ++ ++ /* Initialize dbgu */ ++ initialize_dbgu(); ++ ++#ifdef CONFIG_DDR2 ++ /* Initialize DDRAM Controller */ ++ ddramc_init(); ++#endif ++ /* one wire pin init */ ++ one_wire_hw_init(); ++ ++#ifdef CONFIG_USER_HW_INIT ++ hw_init_hook(); ++#endif ++ ++ /* disable all RTC interrupts and clear status register. ++ * Prevents possible Linux lockup due to unexpected RTC interrupt ++ */ ++ writel(0xFF, RTC_IDR + AT91C_BASE_RTC); ++ writel(0xFF, RTC_SCCR + AT91C_BASE_RTC); ++} ++#endif /* #ifdef CONFIG_HW_INIT */ ++ ++#ifdef CONFIG_DATAFLASH ++void at91_spi0_hw_init(void) ++{ ++ /* Configure PINs for SPI0 */ ++ const struct pio_desc spi0_pins[] = { ++ {"MISO", AT91C_PIN_PA(11), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"MOSI", AT91C_PIN_PA(12), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"SPCK", AT91C_PIN_PA(13), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"NPCS", CONFIG_SYS_SPI_PCS, 1, PIO_DEFAULT, PIO_OUTPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); ++ pio_configure(spi0_pins); ++ ++ writel((1 << AT91C_ID_SPI0), (PMC_PCER + AT91C_BASE_PMC)); ++} ++#endif /* #ifdef CONFIG_DATAFLASH */ ++ ++#ifdef CONFIG_SDCARD ++static void sdcard_set_of_name_board(char *of_name) ++{ ++ unsigned int cpu_board_id = get_cm_sn(); ++ unsigned int disp_board_id = get_dm_sn(); ++ ++ if (cpu_board_id == BOARD_ID_SAM9G15_CM) ++ strcpy(of_name, "at91sam9g15ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9G25_CM) ++ strcpy(of_name, "at91sam9g25ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9G35_CM) ++ strcpy(of_name, "at91sam9g35ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9X25_CM) ++ strcpy(of_name, "at91sam9x25ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9X35_CM) ++ strcpy(of_name, "at91sam9x35ek"); ++ else ++ dbg_log(1, "WARNING: Not correct CPU board ID\n\r"); ++ ++ if (disp_board_id == BOARD_ID_PDA_DM) ++ strcat(of_name, "_pda"); ++ ++ strcat(of_name, ".dtb"); ++} ++ ++void at91_mci0_hw_init(void) ++{ ++ const struct pio_desc mci_pins[] = { ++ {"MCCK", AT91C_PIN_PA(17), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCCDA", AT91C_PIN_PA(16), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA0", AT91C_PIN_PA(15), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA1", AT91C_PIN_PA(18), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA2", AT91C_PIN_PA(19), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA3", AT91C_PIN_PA(20), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ /* Configure the PIO controller */ ++ writel((1 << AT91C_ID_PIOA_B), (PMC_PCER + AT91C_BASE_PMC)); ++ pio_configure(mci_pins); ++ ++ /* Enable the clock */ ++ writel((1 << AT91C_ID_HSMCI0), (PMC_PCER + AT91C_BASE_PMC)); ++ ++ /* Set of name function pointer */ ++ sdcard_set_of_name = &sdcard_set_of_name_board; ++} ++#endif /* #ifdef CONFIG_SDCARD */ ++ ++#ifdef CONFIG_NANDFLASH ++void nandflash_hw_init(void) ++{ ++ unsigned int reg; ++ ++ /* Configure Nand PINs */ ++ const struct pio_desc nand_pins_hi[] = { ++ {"NANDOE", CONFIG_SYS_NAND_OE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDWE", CONFIG_SYS_NAND_WE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDALE", CONFIG_SYS_NAND_ALE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCLE", CONFIG_SYS_NAND_CLE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCS", CONFIG_SYS_NAND_ENABLE_PIN, 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"D0", AT91C_PIN_PD(6), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D1", AT91C_PIN_PD(7), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D2", AT91C_PIN_PD(8), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D3", AT91C_PIN_PD(9), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D4", AT91C_PIN_PD(10), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D5", AT91C_PIN_PD(11), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D6", AT91C_PIN_PD(12), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D7", AT91C_PIN_PD(13), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ const struct pio_desc nand_pins_lo[] = { ++ {"NANDOE", CONFIG_SYS_NAND_OE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDWE", CONFIG_SYS_NAND_WE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDALE", CONFIG_SYS_NAND_ALE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCLE", CONFIG_SYS_NAND_CLE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCS", CONFIG_SYS_NAND_ENABLE_PIN, 1, PIO_PULLUP, PIO_OUTPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); ++ reg |= AT91C_EBI_CS3A_SM; ++ if (get_cm_rev() == 'A') ++ reg &= ~AT91C_EBI_NFD0_ON_D16; ++ else ++ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); ++ ++ reg &= ~AT91C_EBI_DRV; ++ writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* Configure SMC CS3 */ ++ writel((AT91C_SMC_NWESETUP_(1) ++ | AT91C_SMC_NCS_WRSETUP_(0) ++ | AT91C_SMC_NRDSETUP_(2) ++ | AT91C_SMC_NCS_RDSETUP_(0)), ++ AT91C_BASE_SMC + SMC_SETUP3); ++ ++ writel((AT91C_SMC_NWEPULSE_(3) ++ | AT91C_SMC_NCS_WRPULSE_(5) ++ | AT91C_SMC_NRDPULSE_(4) ++ | AT91C_SMC_NCS_RDPULSE_(6)), ++ AT91C_BASE_SMC + SMC_PULSE3); ++ ++ writel((AT91C_SMC_NWECYCLE_(5) ++ | AT91C_SMC_NRDCYCLE_(7)), ++ AT91C_BASE_SMC + SMC_CYCLE3); ++ ++ writel((AT91C_SMC_READMODE ++ | AT91C_SMC_WRITEMODE ++ | AT91C_SMC_NWAITM_NWAIT_DISABLE ++ | AT91C_SMC_DBW_WIDTH_BITS_8 ++ | AT91_SMC_TDF_(1)), ++ AT91C_BASE_SMC + SMC_CTRL3); ++ ++ /* Configure the PIO controller */ ++ if (get_cm_rev() == 'A') ++ pio_configure(nand_pins_lo); ++ else ++ pio_configure(nand_pins_hi); ++ ++ writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC)); ++} ++ ++void nandflash_config_buswidth(unsigned char busw) ++{ ++ unsigned long csa; ++ ++ csa = readl(AT91C_BASE_SMC + SMC_CTRL3); ++ ++ if (busw == 0) ++ csa |= AT91C_SMC_DBW_WIDTH_BITS_8; ++ else ++ csa |= AT91C_SMC_DBW_WIDTH_BITS_16; ++ ++ writel(csa, AT91C_BASE_SMC + SMC_CTRL3); ++} ++#endif /* #ifdef CONFIG_NANDFLASH */ |