diff options
Diffstat (limited to 'recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh')
| -rwxr-xr-x | recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh | 281 |
1 files changed, 0 insertions, 281 deletions
diff --git a/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh b/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh deleted file mode 100755 index ab47d31..0000000 --- a/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh +++ /dev/null @@ -1,281 +0,0 @@ -#!/bin/bash -# Radio ID loop count -TRY_COUNT=30 - -CONFIG_PATH=/var/run/config - -#system capabilities -CAPABILITY_ADC="false" -CAPABILITY_BLUETOOTH="false" -CAPABILITY_DIN="false" -CAPABILITY_DOUT="false" -#CAPABILITY_EXTERNAL_SERIAL_PORT="false" -#CAPABILITY_FLEXIBLE_SERIAL_PORT="false" -CAPABILITY_GPS="false" -CAPABILITY_WIFI="false" -CAPABILITY_CELL="false" -CAPABILITY_LORA="false" -CAPABILITY_GPIO="false" -CAPABILITY_SERIAL="false" -CAPABILITY_RS232="false" -CAPABILITY_RS422="false" -CAPABILITY_RS485="false" -CAPABILITY_NODE_RED="false" -CAPABILITY_LORA_NETWORK_SERVER="false" - - -# accessory cards constans -TEMP_AC_PATH="/var/volatile/tmp" -TEMP_AC_JSON="$TEMP_AC_PATH/ac_data.json" -# Number of accessory card places - size of array -AC_CARD_COUNT=4 - -function usage { - echo 'get-eeprom-device-info [-t TRY_COUNT]' - echo ' Where TRY_COUNT is the number of half' - echo ' second waits for the cellular radio' - echo ' to be ready for identification' - exit 1 -} - -# Reads accessory cards data -# WARNING: Make sure function called after CAPABILITIY_* variables is set with initial values. -ReadAcData() { - # Doing the same as mts-io-sysfs, but with one step, without unnesesary parsing. - MTS_IO_DIR="/sys/devices/platform/mts-io" - AC_PRFIX="ap" - TEMP_AC_FILE_PREFIX="/card" - TEMP_AC_PREFIX="$TEMP_AC_PATH$TEMP_AC_FILE_PREFIX" - # Fill property data for each accessory card - rm -f $TEMP_AC_PREFIX* - for f in `find $MTS_IO_DIR/$AC_PRFIX* -follow -maxdepth 1 -type f -follow -maxdepth 1 -type f 2>/dev/null`; - do - FILENAME=${f##*$MTS_IO_DIR/$AC_PRFIX} - case $FILENAME in - modalias ) - ;; - power ) - ;; - subsystem* ) - ;; - uevent ) - ;; - * ) - AC_NUMBER=$(echo "$FILENAME" | cut -d "/" -f1) - AC_PROP=$(echo "$FILENAME" | cut -d "/" -f2) - # Do camel casing - # Because {sed -r '{s/-([a-z])/\U\1/g;}'} did not work for Not GNU sed 4.0 use awk + tr - # Removing next 2 lines gives about 50% function speed-up - AC_PROP=$( echo $AC_PROP | awk -F"-" '{for(j=1;j<=NF;j++){$j=toupper(substr($j,1,1))substr($j,2)}}1' | sed -r '{s/ //g;}' ) - AC_PROP=`echo ${AC_PROP:0:1} | tr '[A-Z]' '[a-z]'`${AC_PROP:1} - #Output to temp file - AC_FILE="$TEMP_AC_PREFIX$AC_NUMBER" - printf "\"$AC_PROP\" : \"%s\",\n" `cat $f` >> $AC_FILE - ;; - esac - done - # Compose accessory cards data to array - echo "\"accessoryCards\" : [ " > $TEMP_AC_JSON - for ((I=1; I<=$AC_CARD_COUNT; ++I)) ; - do - AC_FILE="$TEMP_AC_PREFIX$I" - if [ -f "$AC_FILE" ];then - sed -i '$s/,$//' $AC_FILE # remove last comma - echo "{" >> $TEMP_AC_JSON - cat $AC_FILE >> $TEMP_AC_JSON - echo "}," >> $TEMP_AC_JSON - - # Map product-id with capabilities. - if $(grep -q '"productId" : "MTAC-MFSER-DTE"' $AC_FILE) || $(grep -q '"productId" : "MTAC-MFSER-DCE"' $AC_FILE); then - CAPABILITY_SERIAL="true" - CAPABILITY_RS232="true" - CAPABILITY_RS422="true" - CAPABILITY_RS485="true" - elif $(grep -q '"productId" : "MTAC-GPIOB"' $AC_FILE) || $(grep -q '"productId" : "MTAC-GPIOI"' $AC_FILE); then - CAPABILITY_GPIO="true" - CAPABILITY_ADC="true" - CAPABILITY_DIN="true" - CAPABILITY_DOUT="true" - elif $(grep -q '"productId" : "MTAC-LORA-.*"' $AC_FILE); then - CAPABILITY_LORA="true" - fi - else - echo "null," >> $TEMP_AC_JSON - fi - done - sed -i '$s/,$//' $TEMP_AC_JSON # remove last comma - echo "]," >> $TEMP_AC_JSON -} - -#check if LORA is present onboard a device. -#Lora capability from an MTAC card is determined by ReadAcData() -isNativeLoraPresent() { - LORA_ID_PREFIX="MTCAP-LORA-" - LORA_ID=$(mts-io-sysfs show lora/product-id 2> /dev/null) - if [[ $LORA_ID == $LORA_ID_PREFIX* ]]; then - return 0 - else - return 1 - fi -} - -TEMP=$(getopt -o t: -n 'get-eeprom-device-info' -- "$@") -eval set -- "$TEMP" -# extract options and their arguments into variables. -while true ; do - case "$1" in - -t) - case "$2" in - "") usage ;; - *) TRY_COUNT=$2 ; shift 2 ;; - esac ;; - --) shift ; break ;; - *) echo "usage" ;; - esac -done - -# Read device information from eeprom device - -mts-id-eeprom --in-file /sys/bus/i2c/devices/i2c-0/0-0056/eeprom > ${CONFIG_PATH}/device_info - -DEVICE_CAPA=${CONFIG_PATH}/device_capa -DEVICE_INFO_JSON=${CONFIG_PATH}/device_info.json - -# Create json data files -echo "{" > $DEVICE_CAPA -echo "{" > ${CONFIG_PATH}/device_info.json - - -# Read each line and parse the device data -while read line -do - -if [[ $line =~ ^vendor-id:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/vendor_id - echo \"vendorId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^product-id:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_type - echo \"productId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^device-id:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_id - echo \"deviceId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^hw-version:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/hw_version - echo \"hardwareVersion\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^mac-addr:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_addr - echo \"macAddress\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^mac-bluetooth:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_bluetooth - echo \"macBluetooth\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^mac-wifi:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_wifi - echo \"macWifi\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^uuid:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/uuid - echo \"uuid\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ ^imei:\ \"(.*)\" ]]; then - echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/modem_imei - echo \"imei\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ capa-gps:\ (.*) ]]; then - CAPABILITY_GPS=$(echo ${BASH_REMATCH[1]}) -elif [[ $line =~ capa-din:\ (.*) ]]; then - CAPABILITY_DIN=$(echo ${BASH_REMATCH[1]}) -elif [[ $line =~ capa-dout:\ (.*) ]]; then - CAPABILITY_DOUT=$(echo ${BASH_REMATCH[1]}) -elif [[ $line =~ capa-adc:\ (.*) ]]; then - CAPABILITY_ADC=$(echo ${BASH_REMATCH[1]}) -elif [[ $line =~ capa-wifi:\ (.*) ]]; then - CAPABILITY_WIFI=$(echo ${BASH_REMATCH[1]}) -elif [[ $line =~ capa-bluetooth:\ (.*) ]]; then - CAPABILITY_BLUETOOTH=$(echo ${BASH_REMATCH[1]}) -elif [[ $line =~ capa:\ \"(.*)\" ]]; then - echo \"mask\": \"${BASH_REMATCH[1]}\", >> $DEVICE_CAPA -fi - -done <${CONFIG_PATH}/device_info - -HASRADIO=$(cat /sys/devices/platform/mts-io/has-radio) -if ((HASRADIO == 1)) ; then - echo "Finding cellular module..." - for ((i=0; i < TRY_COUNT; i++)) - do - # Check cellular module - echo "Try #"$i - if [[ -L "/dev/modem_at0" && -L "/dev/modem_at1" ]]; then - CAPABILITY_CELL="true" - break - fi - if ((TRY_COUNT > 1)) ; then - sleep 0.5 - fi - done -fi - -if isNativeLoraPresent; then - CAPABILITY_LORA="true" -fi - -# -# Check if NODE-RED and Lora Network Server packages are installed -# -OPKG_FILE=/tmp/opkg_inst.tmp -opkg list-installed > $OPKG_FILE - -cat $OPKG_FILE | grep node-red > /dev/null -[ $? -eq 0 ] && CAPABILITY_NODE_RED="true" - -cat $OPKG_FILE | grep lora-network-server > /dev/null -[ $? -eq 0 ] && CAPABILITY_LORA_NETWORK_SERVER="true" - -rm -f $OPKG_FILE - - -# Read firmware info from /etc/issue -cat /etc/issue | -( -while read line -do - -if [[ $line =~ Version:\ (.*) ]]; then - echo \"firmware\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -elif [[ $line =~ Date:\ (.*) ]]; then - echo \"firmwareDate\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON -fi - -done -) -# Add accessory cards -echo "Reading accessory cards data" -ReadAcData -echo "Adding accessory cards data" -cat $TEMP_AC_JSON >> $DEVICE_INFO_JSON - -# Complete the json files -echo \"adc\": $CAPABILITY_ADC, >> $DEVICE_CAPA -echo \"bluetooth\": $CAPABILITY_BLUETOOTH, >> $DEVICE_CAPA -echo \"din\": $CAPABILITY_DIN, >> $DEVICE_CAPA -echo \"dout\": $CAPABILITY_DOUT, >> $DEVICE_CAPA -echo \"gps\": $CAPABILITY_GPS, >> $DEVICE_CAPA -echo \"wifi\": $CAPABILITY_WIFI, >> $DEVICE_CAPA -echo \"cell\": $CAPABILITY_CELL, >> $DEVICE_CAPA -echo \"lora\": $CAPABILITY_LORA, >> $DEVICE_CAPA -echo \"gpio\": $CAPABILITY_GPIO, >> $DEVICE_CAPA -echo \"serial\": $CAPABILITY_SERIAL, >> $DEVICE_CAPA -echo \"rs232\": $CAPABILITY_RS232, >> $DEVICE_CAPA -echo \"rs422\": $CAPABILITY_RS422, >> $DEVICE_CAPA -echo \"rs485\": $CAPABILITY_RS485, >> $DEVICE_CAPA -echo \"nodeRed\": $CAPABILITY_NODE_RED, >> $DEVICE_CAPA -echo \"loraNetworkServer\": $CAPABILITY_LORA_NETWORK_SERVER >> $DEVICE_CAPA -echo "}" >> $DEVICE_CAPA -echo \"capabilities\": >> $DEVICE_INFO_JSON -cat $DEVICE_CAPA >> $DEVICE_INFO_JSON -echo "}" >> $DEVICE_INFO_JSON - -# Clean up temp files -rm $DEVICE_CAPA -rm ${CONFIG_PATH}/device_info - -#echo device_info.json ---------- -#cat /var/run/config/device_info.json -#echo --------------------------- |